Having 12.6 years (10.6 years in India & 2 years in Gulf) relevant experience in site supervision execution, erection, construction, loop checking, pre commissioning, commissioning & trouble shooting.

1. CURRICULUM VITAE
UPENDRA PRASAD
Diploma in Instrumentation
Cell: +7227040156, 7069773801
E-mail: upendrainst2007@gmail.com
Objective: I am looking for a good position in the field of instrumentation in a prestigious
company where previous skills and capabilities can be put to efficient use.
Experience: Having 12.6 years (10.6 years in India & 2 years in Gulf) relevant experience in
site supervision execution, erection, construction, loop checking, pre commissioning, commissioning
& trouble shooting.
Summaryof Skills:
●Abilitytoreadinstrumentationdrawings,P&ID,Instrumentationlocationdrawing,Cable schedule,
interconnection wiringdiagram,Instrumentloopdiagram(ILD),InstrumentsIndex,DataSheets.
Cause & effectchart,Processflowdiagram(PFD).
● Knowledge of all instrumentconstructionworkactivity, sitework planning,projectexecution,
toolstackle,manpowerhandlinginlarge site.
● Able toleada team of supervisor, foreman, co-ordinateswithclientandprogress meeting.
●Familiarwith differenttypesof Instrument Installation&inspectionof PT,FT,LT, TT, DPT, TE,
(EmersonRosemount, ABB, Endress & Hauser, Honeywell,Yokogawaasperdrawing.
●Hand experience tocalibration andconfigurationof differenttype of electronic&pneumatic
instruments(PT,FT,TE, TT,LT, Level Troll) withlatestcalibrationequipment.
●Hand Experience inLoopchecking,commissioningof fieldinstruments,PT,FT,,LT,TT,Control valve,
withprocessand HART 475, fromfieldtoControl roomas per loopfolder.
●FamiliarwithControl valve stroke checking,calibration&splitrage checking,functionalchecking
and trouble shooting, on/off valvechecking withinterlock andlimitswitchsetting.
● Knowledge of workingof fire andgassystem, F&G instruments(Gasdetector,manual call point,
and smoke detector,heatdetector,delugesystem installationandtesting.
●Good knowledgeof workingprinciple,installation,commissioning,FFInstruments,Smart
Transmitters,calibrationandtrouble shooting.
●Knowledgeof Hazardousarea,zone,gasgroup andprotectiontype.Intrinsicsafetyprincipal and
Intrinsicsafe equipment.
● FamiliarwithDCS,PLC,PID control,Cascade control,splitrange,ESD system.
Career Profile:
SINCLUS ENGINEERING AND CONSULTANCY
Since: June 25-2016 to till date
SMART AUTOMATION
Since: March 2-2015 to February 19-2016.
K C C ENGINEERING & CONSTRUCTION (KUWAIT)
Since: November 5-2014 to January 20 – 2015
DODSAL ENGINEERING & CONSTRUCTION PTE LIMITED ABU DHABI (UAE)

2. Since: October 10 - 2012 to March15- 2014
L&T CONSTRUCTION (POWER TRANSMISSION & DISTRIBUTION)
Since: September 28 - 2007 to September 28 - 2012
SIGMA CONSTRUCTION KOLKATA
Since: June 5 - 2003 to September 24 – 2007
Projects:
Working in RIL Refinery J3 Project (PCG DTA) Jamnagar, under Sinclus Engineering and
Consultancy as an Instrumentation Engineerfrom Jan- 2017 to TILL date.
Responsibilities:
Working for execution of PSA & CO Shift unit all instrumentation site construction works.
JB installation, cable tray erection, stanchion erection, panel erection, analyzer work.
Field Instruments Installation as per location & with P&ID diagram.
Responsible for main cable & branch cable laying, dressing, tagging, glanding, termination.
Instruments Impulse piping, Process tubing & control valve tubing as per hookup.
Monitoring Instrument Impulse piping & tubing hydro testing.
Responsible for Punch point closing and ITP signing by client.
Monitoring field Instrument dry loop checking & trouble shooting.
Material co-ordination, man power planning, daily progress monitoring.
Worked in RIL Refinery J3 Project (SEZ & PX 4) Jamnagar, under Sinclus Engineering and
Consultancy as an Instrumentation Engineerfrom June 25 – 2016 to Dec 30 - 2016.
Responsibilities:
Successfully completed Impulse piping & tubing hydro testing of aromatics unit.
Responsible for valve pneumatic tubing & leak testing.
Field Instruments Installation as per location & with P&ID diagram.
Responsibility of Punch point closing and ITP signing by client.
Cable tray erection, JB installation, Air manifold erection in SEZ.
Package Panel erection in control room as per equipment lay out drawing.
Worked in RIL CBM Project Shahdol underSmart Automation as Instrumentation
Engineer. From March 2- 2015 to February 19 - 2016
Responsibilities:
Responsible for execution of GDU Unit all instrumentation site construction works.
Instrument JB installation and Instrument stanchion installation as per location drawing.
Responsible for Field Instruments Installation (PT, FT, LT, TT, RTD, THERMOCOUPLE) as per
P&ID & Location drawing.
Responsible for Instrument cable pulling, Testing & G/T as per cable list & JB wiring diagram.
Supervision of Instrument Impulse Tubing as per hook up. Instrument air tubing of control
valve, Shutdown valve.
Responsible for Fire & Gas detector system instruments installation as per drawing.

3. Calibration and stroke checking of control valves. Interlock checking.
Loop checking of field instruments with HART 375.
Field calibration and configuration of level transmitter DP and Radar, ultrasonic type.
HCR Unit Instrumentation Shutdown work of KNPC underKCC as an Instrument
Supervisor from November 5 – 2014 to January 20 – 2015
Responsibilities:
Responsible for Field Instruments Installation (PT, FT, LT, TT, RTD, THERMOCOUPLE) as per
P&ID & Location drawing.
Monitoring secondary Instrument cable pulling as per JB wiring diagram & Cable list.
Supervision of Instrument Impulse Tubing of PT, FT, instrument air tubing of control valve,
Shutdown valve as per Hookup diagram.
Sequence checking and interlock checking of pump.
Loop checking and commissioning of gas compressor instruments.
Prepare RFI for Inspection and co-ordination with QC people for any comments.
Shah Gas Development (SGD) Project Abu Dhabi of Al Hosan Gas under Dodsal
Engineering & Construction Limited as a Sr. Instrumentation Engineer from October 10 -
2012 to March 15 – 2014
Responsibilities:
Leading a team for Execution of SRU Unit Instruments Field Cable tray erection, JB
installation, stanchion erection, Conduit laying.
Instrument cable laying & Glanding Termination as per Cable list and JB wiring details.
Control room Panel frame erection & DCS Panel installation as per lay out drawing.
Installation of Field Instruments (PT, FT, LT, TT, TE) fire and gas (Manual call point, Horn
Beacon Gas detector) system.
Responsible for Field Instruments Loop checking, interlock checking & Trouble shooting.
Assign job for the sub-contractor. Monitor / Control the activities of the sub-contractor and
ensure timely completion of the project.
Completed Impulse tubing of field Instruments and control valve tubing as per Hookup
drawing.
Co-ordination for loop checking of field instruments and package. (PT, FT, LT, TT, CV, SDV)
with HART 375 Transmitters,
Responsibility for Instrument Punch point closing. With Consultants & Client.
Prepare TQ for any modification & completed job as per Site instruction.
Co-ordination for all instrumentation work, material, manpower planning. Handle progress
review Meeting client meeting. Follow up with client and vendors.
Prepare RFI for inspection & Co-ordination with QC People for any comments
FCC Unit (RR Package ) of IOCL Paradip under Larsen and Toubro Limited (L & T) as an
Instrumentation Engineer from July 8 - 2010 to September 28 – 2012

4. Responsibilities:
Field JB installation, cable tray erection, stanchion installation.
Installation of field Instruments of pre heater, reactor and regenerator as per ILP drawing
&P&ID.
Responsible for Impulse Piping of field Instruments as per Hook up drawing.
Involved in instruments calibration and calibration report preparation.
Instrument cable laying & Glanding Termination as per Cable list and JB wiring details
Associated with field Instruments loop checking from field to DCS & Trouble shooting.
Ensures proper documentation of files, records, databases, and drawings to meet
regulatory and project requirements, and maintains current requirements as to
equipment/materials specifications and vendor preferences.
GGS – 2 Project Rudrasagar Of ONGC Assam under Larsen and ToubroLimited (L & T) as
an Instrumentation Engineer from May 2 – 2009 to July 6 – 2010
Responsibilities:
Supervise and carryout site execution JB installation, cable tray erection, cable laying.
Field Instruments (PT/FT, LT, TT, TE ) Installation as per location &P&ID diagram.
Responsible for Instruments Impulse piping & control valve tubing as per Hookup.
Associated with Field Instrument Calibration & Report Preparation.
Installation F&G detector systemas per drawing.
Configuration and calibration of level transmitter of vessel.
Loop checking and commissioning of separator and manifold area instruments.
Involve in Sequence Checking/Interlock checking of Bath Heater & Separator.
Pre-commissioning & Commissioning of all field instruments & fire water system.
Pre-commissioning of Package Instruments Bath heater, Heater, Air compressor.
Baramura GGS Project of ONGC Tripura under Larsen and ToubroLimited (L & T) as an
Instrumentation Engineer from September 2007 to April 30 – 2009
Responsibilities:
Carryout site execution field instruments, JB installation, cable tray erection.
Field Instruments Installation as per location &P&ID diagram
Responsible for Instruments Impulse piping & control valve tubing as per hookup.
Installation of Telecom system & Gas detector system as per drawing.
Installation and loop checking of fire and gas detector system.
Pre-commissioning of Package Instruments Bath heater, heater, Air compressor, Flame front
generator. Fire water system.
Involve in field instrument Commissioning & Trouble shooting.
Responsible for BMS systemInstrument Installation, Loop checking & commissioning.
250 MW Thermal Power Plant Project MSEB Paras Of under Sigma Construction as an
Instrumentation Engineer from February 1 – 2007 to September 24 – 2007

5. Responsibilities:
Supervise and carryout site execution work like instruments installation, JB installation,
cable tray erection, cable laying, glanding termination etc.
Loop checking of all turbine related instruments
Involved in Loop checking, commissioning and sequence test of BFP instruments.
Loop checking, commissioning and sequence test of ID FAN, FD FAN .Involved in loop
checking and commissioning of field instruments HART Transmitters, control valve, on- Of
250 MW Thermal Power Plant Project NTPC Unchahar under SigmaConstruction as an
Instrumentation Engineer from July 30 – 2006 to June 25 -2007
Responsibilities:
Monitoring site execution work like instruments installation, JB installation, cable tray
erection cable laying, glanding termination etc.
Loop checking, commissioning of Boiler and Turbine instruments.
Review of P&ID’S, Logics, Specification, Hookup, Cable Schedule, Closed loops .
Involved in Loop checking, commissioning and sequence test of BFP instruments.
Involved in instruments calibration and calibration report preparation.
110 MW Thermal Power Plant Project TATAPower Jamshedpur underSigma Construction
as an Instrumentation Engineer from June 5 – 2003 to May 10 – 2004
Responsibility:
Supervise and carryout site execution work like instruments installation, JB installation,
cable tray erection, cable laying, glanding termination etc.
Involve in loop checking of turbine / boiler instruments.
Loop checking of boiler instruments.
Loop checking of all turbine related instruments.
Involved in instruments calibration and calibration report preparation.
Computer proficiency:
Microsoft’s, Outlook, windows10, XP, 7
Education qualification:
Three years Diploma in Instrumentation and control engineering from UPBTE in 2003.
10th passed in the year of 1998.
Personal detail:
Name : Upendra Prasad
Father’s name : Mahanth Prasad
Date of birth : 1st August, 1980
Sex : Male
Language known : English, Hindi
Marital status : Married
Passport no : N3360160
Date of issue : 18.09.2015
Date of Expiry : 17.09.2025

6. Place of Issue : Lucknow
Permanent Address: Village- pipara Baghel, Post-laxmipur Babu, Dist- Kushinagar (U.P)
274407
Declaration: I do hereby declare that all the above furnished details are true in best of my
knowledge.
Date Signature