1. AVIJIT MONDAL
B.TECH IN CHEMICAL ENGINEERING WITH 6.4 YEARS EXPERIANCE
(29th June, 2009 to till date)
E-maill : avijitbtech.09@gmail.com
: avijitbche.09@gmail.com
Phone No:. : +919832263687(M)
: +919903982553(M)
Career Objective:
Seeking a challenging and learning environment in a growth oriented Chemical Process Field where I
can apply my academic knowledge with enthusiasm, motivation and diligence to contribute
progressively in meaningful manner within a team spirits to meet company and pe rsonal goals.
1. Present organization: CFI Technologies Pvt. Ltd., Kolkata
Company Profile:
It is a multinational Chemical & Fertilizer Engineering consultant Design Company, based on France.
Established at 2006, CFI Technologies Pvt. Ltd, a part of CFI Groups with its head office in
Singapore, is a fast growing Organization carrying out Basic and Detail Engineering in the field of
chemical & fertilizers.
CFIh has been involved as technology & process provider and engineering company for several
prestigious projects covering products such as:
a) Phosphoric based Products: Di-Ammonium Phosphate, Single Super Phosphate.
b) Nitrate Based Products: Nitric Acid, Ammonium Nitrate (LDAN & HDAN)
c) Nitro-phosphate / NPK Based Products: NP (20:20, 22:22, 15:15:15)
d) Calcium Ammonium Nitrate: CAN (27%), ODDA Process.
Present Designation: Process Engineer
 5 years & 1 month experience (October 2010 to till date) as a Process Engineer in the field of
Chemical and fertilizers (Basic and Detail Engineering Design).
Job Responsibility:
Present Project: Di-Ammonium Phosphate Plant (DAP).
Process Projects Responsibility:
 Preparation of Block Diagram, Process Flow Diagram & Equipment List.
 Preparation of Mass & Heat Balance.
 Calculation of different grade and main process involved in process technology.
 Preparation & checking of P&ID.
 Pump Sizing, hydraulic calculation and data sheet preparation.
 Line sizing, tank sizing and pressure drop calculation of various process lines.
 Review of calculation of Pressure Relief Valve using API-520
 Sizing of Rotary Drum and Cyclone Separator.
 Preparation of Datasheet of various equipment like Pump, Tank, Heat Exchanger, Rotary Drum,
Cyclone Separator, PSV, Fan and Blower etc.
 Preparation of Line list, Valve Schedule, motor list etc.
 Technical Bid Analysis of various equipment /package items.
 Review of various vendor drawing / documents.
Project Handled:
 800 MTPD Revamping of Di-Ammonium Phosphate (DAP) plant.
 150 MTPD Calcium Nitrate (CN) project.
 1 200 MTPD Nitro Phosphate (NP) Plant.
Process Developments Responsibility: Preparing technical proposal of DAP, NPK (mixed), SSP, NP,
CAN plant in India and abroad.
 Preparation of Process Block Diagram, Process Flow Diagram, Equipment List, Process
Description, Calculation of Mass & Heat balance, Hydraulic calculation of pump, Specific
consumption of raw material & Utility, Preparation of P&I Diagram, Pipe line sizing, vendor
Specification, Plot Plan etc.

2. 2. Previous Organization: Sen PET (India) Ltd.
Company Profile:
Sen PET (India) Limited manufactures bottle grade PET resins in India. Its products are used for
downstream manufacturing of PET bottles used in the bottled drinks, beverage, liquor, and
pharmaceutical sectors, located at Kolkata, West Bengal, India, having capacity of over 120 MTPD
using Technology of SUNKYONG INDUSTRIES LTD. South Korea for Continuous Polymerization
plant and BUHLER Ltd. for SSP plant, Switzerland.
Designation: Process Engineer
 1 Year & 3 Months experience (June 2009 to September 2010) as a Process Engineer in State
of the art export quality bottle grade PET resin manufacturing plant (Operation).
Job Responsibility:
 DCS Operated controlling systems.
 Process recovery Distillation Plant of “Mono Ethylene Glycol”.
 Distillation Columns (Plate Type).
 Continuous Process Reactors and Vacuum systems.
 Rotary Blowers, Steam Ejectors, Dryers.
 Pumps like Centrifugal, Gear, Screw, Vacuum Pumps.
 Valves like gate valve, globe valve, knife valve, rotary valve, ball valve.
 Utilities handled are steam, cooling water, chilled water, DM water, Raw Water, Instrument
air, process air (dew point of -40oC).
 Production Calculation & process efficiency calculation of different main operation and main
process involved in process technology.
Additional Skill:
 Auto CAD, MS office, SF Pressure Drop, PSV Design Valvestar.
 Simulation Software: SysCAD in process of learning of DAP & NPK Process.
Academic Qualification:
 B.Tech in Chemical Engineering from Haldia Institute of Technology under West Bengal
University of Technology, Purba Medinipur, Haldia, West Bengal, India with 7.61 (DGPA) in the
year of 2009.
 Diploma in Chemical Engineering from Dr. Meghnad Saha Institute of Technology under West
Bengal State Council of Technical Education, Purba Medinipur, Haldia, West Bengal, India with
73.4% in the year of 2006.
 Higher Secondary from Anandapur High School under West Bengal Council of Higher Secondary
Education, Paschim Medinipur, West Bengal, India with 60.6% in the year of 2002.
 Secondary from Keshpur Lakshmi Narayan High School under West Bengal Board of Secondary
Education, Paschim Medinipur, West Bengal, India with 54.5% in the year of 1990.
Present C.T.C : 4 70 000
Expected Salary : Negotiable
Passport No. : K4908538
Notice Period : 3 Months (Negotiable)
Personal Information:
Date Of Birth 07/10/1983
Marital Status Single
Sex Male
Nationality Indian
Address
C/O-Pusparani Mondal
3/80-S.N. Banerjee Road, Durgapur
Dist. – Burdwan, West Bengal
India, Pin – 713204
Declaration:
I consider myself familiar with Chemical Engineering aspects. I am also Confident of my ability to work
in a team.
I hereby declare that the information furnished above is true to the best my knowledge.
DATE: 15/11/2015 SIGNATURE:………………………………..………………..
(Avijit Mondal)