1. Curriculum Vitae
Mohammad Rashid Khan
Contact Details: House # 156, Street # 19 British Homes
Phase II, Rawalpindi, Pakistan.
Tel: +92515474102
Cell # +923335137740
E-Mail: mrashid89@yahoo.co.uk
Objective: To improve the world by solving interesting problems
with Geospatial technology.
General
As a Chief Geomatics / Client Rep (positioning & navigation QC ) and
Consultant Geomatician I have over 27 years of experience in land,
industrial building, engineering, and pipeline surveys throughout the
Middle East, Far East, Pakistan and North Africa, including satellite imagery
processing and execution of geographic information systems.
I have worked in multi-cultural environments, managed large teams, often
in harsh conditions, and familiar with meeting tight timescales to budget.
My key skills include; practical common sense; honesty and integrity;
energy and enthusiasm; an ability to listen, understand and communicate
with different nationalities and cultures; an open mind; a lot of patience; a
competence to find collaborative solutions in complex working
environments.
Qualifications:
GIS Qualification:
1. Web based course of 450 credit hours for University of Reading BSc
Honors in QS n PM for the certification of Chartered membership of
RICS UK.
2. MS GIS/SRS subjects studied: Advances GIS, Advanced Remote
Sensing, DBMS, GIS Project Management, Hydrology, Natural
Hazards & Disaster Management, Research Methodology and Spatial
Decision Support System. Intend to do MS Thesis.
3. GIS/RS post graduate certificate of 6 weeks from NUST (National
University of Science & Tech). F-10/2 Islamabad and a fire fighting
infrastructure project for Islamabad were presented at the end of the
course.
2. 4. EMBA with specialization in project management in Feb 2006
5. Bachelor of technology (Honors) in civil engineering PIMSAT Islamabad
Pakistan in 2006.
6. Bachelor of Technology (Pass) in civil engineering with 3.75 GPA from the
Preston University Islamabad in 2004.
7. Diploma of Associate Engineer in civil engineering with 1st division from
the Punjab Board of Technical Education (Government College of Tech
Rawalpindi) in 1981.
8. High school Certificate with 1st division from the Board of Intermediate and
Secondary Education Sargodha in 1977.
Scholarship: Merit scholarship
Employment History
1. Currently working as Navigation and Positioning QC consultant with
Petrotrin on 3D seismic project in Trinidad since June 2010 till to
date
2. Freelance Geodetic and surveying consultant with local oil and gas
companies in Pakistan from Sep 2009 to May 2010
3. Geodetic, Navigation & Positioning Consultant, relief Seismic QC
and QHSE QC with Shell Kazakhstan on Pearls 3D offshore data
acquisition project in Caspian Sea Kazakhstan as a Client Rep since
Aug 2008 to 2009
Responsibilities includes
My primary role as Offshore Survey Representative is to ensure that
the survey subcontractor executes the project survey work scope
according to the specifications, the project specific survey procedures
and to any specified time and budget targets within the project
schedule.
To conduct all activities within the Integrated Management System
Policies and Procedures.
To assist the Project Surveyor with the preparation of project
procedures and the planning of survey activities in advance of
mobilisation
To attend project briefings, contractor’s safety drills project
management meetings etc.
To participate proactively in Hazid or Hazop meetings as required,
either in the office in advance of mobilisation or on the vessel
To confirm that all the planned survey equipment and spares, supplied
by both the company and the survey sub-contractor, are onboard the
vessel
To monitor the safe mobilisation of survey equipment on the vessel
and ROV and confirm that all equipment is installed according to
3. approved project specific survey procedures
To QC the survey systems calibrations and mobilisation reports
submitted by the survey sub-contractor
To assist the Vessel Superintendent with the overall planning of
survey vessel activities
To review the Survey Sub-Contractor DPRs
To attend regular vessel safety meetings
To facilitate the flow of survey information and results between the
vessel and other vessels operating on the project
To ensure that the survey sub-contractor carries out survey activities
according to the relevant specifications and approved project specific
survey procedures
QC field data, field reports and charts, ensuring that relevant
specifications are met
To monitor survey progress, including the production of field
deliverables according to agreed project schedules
Online monitoring of navigation and positioning data on the client’s
work station with EIVA suit installed.
Monitoring & QC of daily navigation data processing.
Monitoring weather forecasts
To liaise with the Customer Survey Representative and the Survey
Sub-contractor Party Chief on survey issues
Being a relief seismic QC to sign off daily production reports for the
purpose of invoicing to release payments to the contractor.
To liaise with the contractor’s geophysicist department regarding the
seismic data quality and to monitor the First Break Data transmitted to
Navigation department.
Visual checking of seismic plots from the recording section and check
observer’s log and to transmit the required info the town based on
shore Project Manager.
4. Data Manager/Senior Surveyor in Global Geophysical Services Ltd
on a 3D seismic data acquisition project in Oman for BP, since Feb
2008 to Feb 2009.
5. Principal Survey Officer/HOD/ in OGDCL head office Islamabad
Pakistan since Sep 2007. Responsible for the management of 5
seismic survey crews working in different parts of the country.
6. Chief Geomatics Surveyor in Asia Geophysical Services, from 2004
till Aug 2007 in Pakistan
Responsibilities for the technical and organizational management of all the
projects run from head office. Survey crews comprising senior surveyors,
surveyors and supporting staff reporting me, the position is based in head
office. Responsibilities includes, performance appraisal of survey section.
4. Technical approval and recommendations for the procurement and
purchase of survey equipment (hardware and software) and arrange
training for staff in collaboration with vendors.
Duties:
Managing, overseeing and controlling of land survey activities
Static Control survey, post processing of Static control data, Network
adjustment
Primary geodetic control and local grid establishment, Digital Terrain
Modeling and topographic data management for all prospects of
assigned blocks.
Preparing and supervising pre-plot data (design co-ordinates) for
staking out seismic lines as per specifications of clients either for 2D,
3D, and High Res 2D or sparse pattern using GPSeismic planning
software.
Resolve technical queries in a swift and appropriate manner, including
technical issues raised during the execution phase.
The work involved liaising with clients, consultants and other
departments like Geophysist QC’s, Observers/Instrument techs and
Vibe tech departments.
Conducting technical and QHSE audits periodically.
Setting annual objectives of the department and conduct quarterly
performance reviews with the personnel and provide required
resources.
Arrange and conduct technical, management and QHSE trainings of
staff.
Prepare project completion reports and submission to the clients &
consultants,
Solving software issues, updates, new versions and other license
renewals etc.
Database management of geospatial data in the ARCGIS 9.2 and in
GPSQL.
Perform analysis in ARCGIS 9.2 and Erdas Imagine.
Produce DTM/DEM’s in Quick Map of GPSeismic survey suite.
Performing georefrencing, Image reclassification and image
enhancement, image mosaic, aspects, slope etc.
Being based in head office of the company in Islamabad I have the
privilege to carry on my study so I completed my B-Tech pass, honors
and MBA project management degrees in evening classes and
presently I am also studying for my MS GIS/SRS degree at the
National University of Sciences and Technology’s Institute of
Geographical Information System.
7. Chief/Senior surveyor Schlumberger Westerngeco, from 1995 to 2004
in Kingdom of Saudi Arabia, Jordon, Egypt, Kuwait, and Pakistan (9
years)
5. Initially started as a senior land seismic surveyor on (KOC) Kuwait Oil
Company projects of Burgan 3D seismic acquisition which is one of the
largest oil production fields in the world. It was field based job so I was
responsible for the survey production, as field crews were reporting
directly to me.
Scouting and reconnaissance of prospect area and prepare scouting
report.
Establishing GPS static control network which includes mission
planning and data acquisition.
Process GPS data to produce final results and then adjust network.
Establish base stations for RTK to set out seismic lines.
Prepare design coordinates for the seismic lines with in GPSeismic
planning environment.
Up load design coordinates for staking out and then download
acquired data.
Perform QC, apply transformations and datum shifts on GPS data and
merge into the GPSeismic SQL data base for final presentation.
Produce access and base maps for different departments by using
AutoCAD 2000i.
After the completion of project in Kuwait my next assignment was in
Egypt and then for few months in Jordon. The duties and
responsibilities were the same apart from the working environment as
the work force in the Kuwait was mainly from sub-continental countries
where as in this part of the world it was local manpower, which was
another unique experience.
In year 1999 I was assigned to KSA where initially I was responsible
for performing the same duties as a senior surveyor but I was a relief
section head. Then I was promoted to Chief surveyor. In that capacity I
was section head of the survey department.
In this role I was reporting directly to the project manager and
technically to the survey supervisor based in head quarter. Senior
surveyors, surveyors, assistant surveyors, survey Forman, earth
moving operations supervisor and supporting staff was reporting to me.
In the capacity of chief surveyor I was responsible for the management
of the survey department which includes assigning and deploying
survey crews when and where required.
Densified primary geodetic control and local grid establishment. Digital
Terrain Modeling and topographic data management for all prospects
of the allocated projects by the Client Saudi Aramco
Contribution to the development of GIS corporate data base using Arc
view. Input was provided by giving RTK data, shape files and
topographic details of AOI.
Survey mission planning and seismic positioning of offset on the
satellite imagery. Georeferncing and reclassification of satellite images.
Conducting scouting and reconnaissance along with PM and client’s
6. representative and Vibe techs. Preparing scouting reports.
Selecting camp locations in consultation with project manager and
setting out camps and infrastructure.
Conducting training of the survey staff both technical and QHSE.
Budget forecasting, performance appraisal.
Initiating, planning, execution, monitoring and controlling and closing
out survey projects.
8. Senior surveyor/data processor in Fugro Geodetic from 1994-1995 (1
year) on Union Texas Petroleum E & P projects in Pakistan.
Survey data processing, (conventional and GPS) both cadastral, LIM
and engineering for an oil and gas field development project.
9. Inertial/GPS survey supervisor in Geonex Asian operations on
USAID/WAPDA mapping project in NWFP and Punjab from 1993-1994
(1y)
For the purpose of asset management WAPDA staged a digital
mapping project in collaboration with USAID. I was responsible for the
over all supervision of data acquisition both with total stations and
GPS, data processing, data management in different parts of Pakistan.
10. Expatriate status Surveyor/Earth moving operation supervisor in SSL
(Seismograph Service Ltd in Burma, Dubai, Abu-Dhabi, Sharjah and
Pakistan from Jan, 1990-1993 (3y).
I was responsible for the supervision of survey field operation including
large scale earth moving operation with caterpillar machines D-8, D-9,
D10, Scrappers, graders, shovels and front end loaders.
In Burma I was in charge of a section of project which includes survey
teams and bulldozing operation for the access of heavy seismic
machines like vibrators etc.
Due to non accessibility of mountainous terrain the logistic support was
provided with choppers which required a precise time management.
11. Associate Civil engineer on SNGPL pipeline, LPG/NGL plant for
(PPL) & Kot Addu Power plant with DESCON Engineering Ltd from
Sep, 1988-1989 (1y) in Pakistan.
As an associate engineer I was responsible for the construction
supervision of pre-cast pipe supports of high pressure gas pipeline and
construction of pipe culverts and under passes for the pipeline.
On LPG plant I was in charge of a section of plant which includes
foundation of circular storage tanks, LPG bullets, internal access
roads, fencing, steel structures and steel trusses.
On the power plant I was responsible for the construction supervision
of water intake building including formwork, RCC etc.
12. Seismic Surveyor with SSL for all major Oil companies in Pakistan
from 1984 to 1990 (6years)
As a field surveyor I started using conventional equipment like T1, T2,
theodolite with EDM, then gradually switched to electronic machines
and total station for field data acquisition.
13. Quantity surveyor site supervisor with DESCON Engineering
7. services Ltd from 1981-1984 (4 years), on different industrial building
projects in Pakistan.
Site Survey and taking measurements, quantities for existing civil/ steel
structures and electro mechanical items.
Prepare Bill of Quantity and Budget cost at pre tender stage of project.
Assist and co-ordinate in preparation of Scope of Work for the project.
Assist in preparation of drawings details and construction methodology
at tender stage.
Review Bill of quantity and prices during tender evaluation.
Review of progress payment proposal by Contractor for re-measurable
and lump sum items.
Review and issue comments on Material submittals, method
statements and safe job analysis submitted by contractor.
Monitor and Control Permit to Work (PTW) for all activities during
construction at site.
Coordination with concerned production and maintenance sections at
site.
Supervision and checking of dimensions, alignment and concrete
cover during erection of form work.
Conduct checks for all construction materials such as steel bars, steel
structures, concrete mix materials (cement, aggregate, sand etc);
material coating etc. received at site are in compliance with the
contract technical specifications.
Supervise and quality check of the concrete mix at Batching plant.
Supervise and quality checks the concrete pouring at site.
Supervise and check the concrete quality and curing before and after
the shuttering.
Supervise and quality checks during grit blast, surface preparation and
coating of the steel structural part.
Conduct weekly meetings with the contractor. Monitor and report on
construction progress and project completion schedule!
Witness site Civil Work Tests such as Trials Mix, Slump
measurements, Cube crushing, Proctor test, Soil Compaction, Coating
8. Dry Film Test (OFT), Pull Off, Sieve analysis for Aggregates & Sand
etc.
Prepare and issue field instructions to construction contractor for
specific construction activities.
Review & verify site measurements and quantities submitted by
contractor.
Monitor and control day work sheets if any on daily basis.
Check & verify the Contractor's invoices in accordance to specification,
drawings, Bill of Quantities items and terms of Contract.
Prepare monthly cost analysis report including cost forecast.
Review and analyze variations/ claims submitted by the Contractor.
Review and prepare final Account statement for the project.
Review and verify As-built drawings
Review and certify QA/QC Dossier.
Assist in preparation of project close out report! And compilation of
lesson learnt items noticed during construction.
Awards: QHSE participation award
Skills & Competencies
GPS Hardware used
1. Trimble GPS series 4000, 4700, 4800, 5700 and 5800.
2. Leica Geosystems series 400 and 500.and 1200.
3. Garmin Handheld GPS for navigation.
4. Sokkia GPS Radian IS
Survey techniques
1. Static/Post processing survey for the establishment of permanent
bench marks for large-scale geodetic and topographic surveys.
2. RTK (Real Time Kinematics) surveys for setting out and lay out of
designed coordinates.
3. As built surveys either by using RTK or PPKS or DGPS.
Software Used
1. Trim map, GPSurvey, Trimble Survey Office and TGO for GPS data
processing and network adjustment.
2. Leica Processing software & SKI. And Leica Geo-system’s survey
office.
3. Mapsource for Garmin handheld receivers.
4. Spectrum Survey Suite.
5. GPSeismic GPS and conventional survey data processing software
9. used especially in oil and gas exploration industry.
6. AutoCAD's application in seismic industry. Especially AutoCAD 2000i
for image management utility.
7. ARC View & ARCGIS9.2
8. ERDAS Imagine.
9. Introductory knowledge of 12D software for volumetric calculations and
civil design purposes. (Introductory knowledge)
10. Blue marble’s GeoCalc for geodetic data transformations.
11. Geomedia GIS software. (Working knowledge)
Safety Trainings:
1. Advanced Lead Auditor Course ISO 14001 Environmental
Management System by IQMS approved and accredited by IEMA
in Oct 2009.
2. Certified QHSE diploma course from IQMS in progress since Oct
2009.
3. Basic Offshore Safety Induction & Emergency Training (BOSIET)
of OPITO valid from 23/08/08 till 23/08/12 from YKK Kazakhstan.
4. HSEQMS for Managers by Jeff Howell of Global Geophysical
Services Ltd in Muscat Oman from 9/07/08 to 12/07/08.
5. LPT Leader’s Course in Dammam Saudi Arabia in Jan2001
6. Schlumberger Injury Prevention Program in Jan 2001 in Saudi.
7. OFS (Oil Field Services Minimum Safety Training Course,
including basic of all industry used courses like use of PPE,
QHSE Passport, RIR etc in Saudi Arabia.
8. Defensive driving and commentary driving in Egypt and Saudi.
9. STOP training
10. Fire Fighting, First Aid, Trauma, Stepping Handling & Lifting (SHL)
11. HSE for Supervisors in Saudi.
12. H2S etc in Kuwait.
Technical and Management Trainings:
1. A Manager’s Guide to Project Management course of 35 PDUs by
PMI accredited trainer in Nov 2009.
2. Distance Learning Short Course on Social Capacity Building for
Arsenic Mitigation Measures by UDERC Tokyo Institute of Tech
Japan, Session June 2007.
3. Primavera Project implementation and planning course from SDC
Islamabad Pakistan in 2006.
4. People Management Course (OFS3) in July 2003 in Dubai
5. Leica Geosystems field operation and in-house processing
course in Karachi in 2004.
6. GPSeismic Advance user’s course (Survey Processing Software
Course) in 2000 in Saudi Arabia
10. 7. Schlumberger Internal: IMS (Integration Management System) for
seismic Surveyors in 1997 from Hanover Germany.
8. 1st Surveyors Workshop in Dec 1997 in Gatwick England
9. Total Quantity Management (TQM) in 1997 in Kuwait
10. SQM (Schlumberger Quality Management) Level 1 in KSA
Professional Membership:
1. Member of American Society of Civil Engineers (ASCE)
2. Professional member Institution of Navigation of USA
3. Member of PMI (Project Management Institute) USA.
4. Member RICS UK
5. Member CIG Canada
6. Member Pakistan Society of GIS
7. Member SCGIS
8. Member GITA
9. RIN UK,
10. IEEE USA,
11. SSI Australia
Seminars and Workshops
Being a member of PMI Islamabad chapter since 2006, I have hardly missed
an opportunity to attend a seminar or workshop held in Islamabad Pakistan.
Project Management and Six Sigma (2 PDUs)
Balancing Projects & Work Operations (2 PDUs)
Project Management Financial Terms (2 PDUs)
Cost Management (2 PDUs)
Effective Resource Management (2 PDUs)
Virtual Project Management & Emotional Intelligence (2 PDUs)
Several other professional webinars of IEEE and other societies.
Personal Information:
NIC: 37405-5810231-7
DOB/: 21-02-1962
F/Name: Haji Mohammad Rafique Khan
Address: House # 156, Street # 19, British Homes
Phase II, Rawalpindi, Pakistan.
Fly Point: Islamabad
Passport # LV4102311
Languages: Urdu and English.