Registrador multicanal GR100 Hanyoung nux
•
0 likes•537 views
This document describes a bright color TFT LCD and touch panel system that can receive various analog and digital inputs, display data trends and historical views, perform computations and conversions, and communicate via common protocols. It has 6 or 12 analog input channels, 6 digital inputs, 6 or 12 relay outputs, and supports SD memory cards. The system is produced by Hanyoung Nux, a leading South Korean corporation in automatic control measurement.
Report
Share
Report
Share
Download to read offline
Recommended
automation of street light using 8085 microprocessor
1. This document describes a project to automate street lights using an 8085 microprocessor.
2. It includes programs to design a digital clock displaying hours, minutes and seconds, as well as code to operate a relay to turn street lights on from 8:00am to 5:00pm.
3. The project concludes that the 8085 microprocessor can easily be used to automate street lights based on the time of day.
PROGRAMMABLE PERIPHERAL INTERFACE (PPI) -8255
This presentation summarizes the Programmable Peripheral Interface 8255 chip. It includes an introduction to the PPI 8255, describing it as a general purpose programmable device used for data transfer between processors and I/O devices. It has 3 programmable I/O ports (PA, PB, and PC) that are operated in different modes like I/O modes and BSR mode based on the control word in the control word register. The presentation also includes a pin diagram showing the functions of the various pins, and a block diagram depicting the internal structure and data flow of the PPI 8255 chip.
Traffic light control
This document describes a traffic light control system using a PIC 16F877A microcontroller. The system uses the microcontroller to control the lights in a cyclic rotation, with the red light on for 35 seconds, yellow for 15 seconds, and green for 5 seconds. It then repeats the cycle. The microcontroller is connected to traffic lights, a 7-segment display to show the time remaining, and runs a program to control the light rotations and display countdown. There is potential to enhance the system using sensors to automatically control lights based on traffic density.
Project poster: SDR platform elements
This document describes a universal digital modulator board from SagaxSagax Ltd. that contains several technology enhancements. The board includes an FPGA, digital upconverter, CPLD-based cross-connects, and interpolating DACs. It can be used as a mezzanine card on a DSP board for applications such as multichannel and phased array systems. The document also mentions the development of a universal PCI-based analog to digital converter card with one input and output channel, 80MHz sampling, and slave mode PCI interface.
Traffic Light Controller using 8255
This document describes the design and implementation of a traffic light controller using an 8255 PPI (Programmable Peripheral Interface) chip in an 8085 microprocessor environment. It includes circuit diagrams for the traffic light signals, coding for the traffic light sequences, and an assembly language program that uses delays in a loop to control the light sequences. Memory-mapped I/O is used to control the 8255 PPI pins that output to the traffic lights. Formulas are provided to calculate delay times based on the number of T-states (clock cycles) needed by each instruction.
ADS79XX Analog-to-Digital Converters
This document provides an overview of the ADS79xx family of analog-to-digital converters (ADCs) from Texas Instruments, including key features, applications, and internal operation. It describes the SAR architecture and 12/10/8-bit resolution of the ADCs. It also outlines the product family, block diagram, channel sequencing modes, power-up sequence, programming of alarm and GPIO thresholds, and example reference designs. The document is intended to introduce the ADS79xx family and its features.
Interroll DC Platform From standard applications to systems with Industry 4.0...
Smart: Interroll DC Platform
From standard applications to systems with Industry 4.0 functionality
The new DC Platform has the perfect solution to any request.
Many system integrators and plant constructors face the challenge of how to
cost-effectively create a tailored system with plug-and-play solutions. The new DC Platform from Interroll is a high-performance technology platform that does just that. It offers – from a single supplier – an innovative, coordinated range of technological solutions, all based on years of development and testing.
18. memory interfacing iv
This document discusses the opcode fetch cycle of the 8085 microprocessor. It contains timing diagrams and explanations of how the microprocessor generates control signals to fetch opcodes from memory. It shows how the 8085 demultiplexes the address and data buses to access specific memory locations and place the fetched opcode on the data bus. Control signals like IO/M, RD, ALE are generated and used to latch the lower order address and retrieve the opcode byte from the addressed memory location during fetch.
Recommended
automation of street light using 8085 microprocessor
1. This document describes a project to automate street lights using an 8085 microprocessor.
2. It includes programs to design a digital clock displaying hours, minutes and seconds, as well as code to operate a relay to turn street lights on from 8:00am to 5:00pm.
3. The project concludes that the 8085 microprocessor can easily be used to automate street lights based on the time of day.
PROGRAMMABLE PERIPHERAL INTERFACE (PPI) -8255
This presentation summarizes the Programmable Peripheral Interface 8255 chip. It includes an introduction to the PPI 8255, describing it as a general purpose programmable device used for data transfer between processors and I/O devices. It has 3 programmable I/O ports (PA, PB, and PC) that are operated in different modes like I/O modes and BSR mode based on the control word in the control word register. The presentation also includes a pin diagram showing the functions of the various pins, and a block diagram depicting the internal structure and data flow of the PPI 8255 chip.
Traffic light control
This document describes a traffic light control system using a PIC 16F877A microcontroller. The system uses the microcontroller to control the lights in a cyclic rotation, with the red light on for 35 seconds, yellow for 15 seconds, and green for 5 seconds. It then repeats the cycle. The microcontroller is connected to traffic lights, a 7-segment display to show the time remaining, and runs a program to control the light rotations and display countdown. There is potential to enhance the system using sensors to automatically control lights based on traffic density.
Project poster: SDR platform elements
This document describes a universal digital modulator board from SagaxSagax Ltd. that contains several technology enhancements. The board includes an FPGA, digital upconverter, CPLD-based cross-connects, and interpolating DACs. It can be used as a mezzanine card on a DSP board for applications such as multichannel and phased array systems. The document also mentions the development of a universal PCI-based analog to digital converter card with one input and output channel, 80MHz sampling, and slave mode PCI interface.
Traffic Light Controller using 8255
This document describes the design and implementation of a traffic light controller using an 8255 PPI (Programmable Peripheral Interface) chip in an 8085 microprocessor environment. It includes circuit diagrams for the traffic light signals, coding for the traffic light sequences, and an assembly language program that uses delays in a loop to control the light sequences. Memory-mapped I/O is used to control the 8255 PPI pins that output to the traffic lights. Formulas are provided to calculate delay times based on the number of T-states (clock cycles) needed by each instruction.
ADS79XX Analog-to-Digital Converters
This document provides an overview of the ADS79xx family of analog-to-digital converters (ADCs) from Texas Instruments, including key features, applications, and internal operation. It describes the SAR architecture and 12/10/8-bit resolution of the ADCs. It also outlines the product family, block diagram, channel sequencing modes, power-up sequence, programming of alarm and GPIO thresholds, and example reference designs. The document is intended to introduce the ADS79xx family and its features.
Interroll DC Platform From standard applications to systems with Industry 4.0...
Smart: Interroll DC Platform
From standard applications to systems with Industry 4.0 functionality
The new DC Platform has the perfect solution to any request.
Many system integrators and plant constructors face the challenge of how to
cost-effectively create a tailored system with plug-and-play solutions. The new DC Platform from Interroll is a high-performance technology platform that does just that. It offers – from a single supplier – an innovative, coordinated range of technological solutions, all based on years of development and testing.
18. memory interfacing iv
This document discusses the opcode fetch cycle of the 8085 microprocessor. It contains timing diagrams and explanations of how the microprocessor generates control signals to fetch opcodes from memory. It shows how the 8085 demultiplexes the address and data buses to access specific memory locations and place the fetched opcode on the data bus. Control signals like IO/M, RD, ALE are generated and used to latch the lower order address and retrieve the opcode byte from the addressed memory location during fetch.
Wireless data logger using rf communication
This document describes an automatic station indication system for railways that uses RF wireless communication to transmit information about upcoming stations from transmitters located at each station to a receiver installed in trains. The receiver is connected to a microcontroller that displays the station name on an LCD screen and plays a prerecorded voice message to announce stations to passengers. It allows passengers to know the next station to help prevent missing their stop.
1204 Ppi 8255
The document discusses the 8255 programmable parallel I/O device that can be used to interface I/O devices to a microprocessor like the 8085. It describes how the 8255 has three I/O ports (Port A, Port B, Port C) that can be configured using a control word. It then provides an example of interfacing an 8-bit analog to digital converter and temperature sensor to the 8255 ports to read temperature values using instructions like OUT, IN.
8255_utkarsh_kulshrestha
Presentation on IC 8255 programmable peripheral interface with complete description of modes and its examples.
An application of 8085 register interfacing with LCD
This ppt will guide you through the steps to interface a seven segment lcd with a 8085 microprocessor.
8255 Programmble Peripheral Interface
The document describes an experiment involving the Intel 8255 Programmable Peripheral Interface chip. It discusses:
1) The 8255 PPI chip's architecture which includes 3 8-bit I/O ports (A, B, C) that can be configured as input or output ports in different operating modes.
2) The two main operating modes - I/O mode and Bit Set/Reset mode. I/O mode has three sub-modes (Mode 0, 1, 2) for different handshake capabilities.
3) Examples of 8255 PPI applications in computers like the original IBM PC.
4) Example assembly language programs to configure the 8255 ports in different input/output modes
8255:ppi & 8259:pic
MICROPROCESSOR AND INTERFACING
8255A : ppi
8259A : pic
Basics of 8255A PPI
Different I/O mode of 8255A
Basics of 8259A PIC
Different interrupt mode of 8259A
Programming Mode of 8259A
8255 ppi
The 8255 PPI (Programmable Peripheral Interface) chip is used to interface I/O devices with microprocessors. It has 3 ports (A, B, and C) that are programmable and can operate in 3 different modes to handle input, output, and bidirectional data transfer with handshaking. Port C pins also act as handshake signals for ports A and B depending on the mode. The control word written to the 8255's control register determines which ports are inputs/outputs and the operating mode.
Microprocessors 8085 architecture
The microprocessor is the central processing unit of a computer. It is the heart of the computer. 8085 is one of the most popular 8-Bit microprocessors in India. Because of its unique characteristics of both industry and academics still regarded as standard this microprocessor.
8255 PPI or parallel interface
The 8255PPI is a programmable peripheral interface with 3 8-bit ports (A, B, C). Ports can be configured as input or output in different modes. It has 2 main modes - Bit Set/Reset for individual bit operations and I/O mode with submodes 0, 1, 2 for port configuration. Ports A and B can be used for simple I/O in mode 0 or handshake operations in mode 1. Mode 2 allows bidirectional data transfer on port A using port C pins as handshake signals.
Microprocessors 8085 pin diagram
The document summarizes the pin diagram of the 8085 microprocessor. It describes the various pins including the address bus pins A15-A8 that carry the most significant 8 bits of the memory/IO address and pins AD7-AD0 that carry the least significant 8 bits of the address and data bus. It also describes the control signals like RD, WR, and ALE, the status signals IO/M, S1 and S0, the power supply pins VCC and VSS, the clock signals X1, X2 and CLK OUT, the interrupt pins like TRAP, RST 7.5, RST 6.5, RST 5.5, and INTR, and the serial I
Clyde Broadcast (Arcs brochure v2)
ARCS is a software controlled routing system for radio stations with multiple studios and separate transmission
outputs. It is a customer configurable product, and can operate with a variety of routers from several different
manufacturers, which can be analog or digital.
Interfacing of 8255 IC By Er. Swapnil Kaware.
This document provides an overview of interfacing concepts and the Intel 8255 Programmable Peripheral Interface. It discusses the basic concepts of memory mapped I/O and I/O mapped I/O. It then describes the architecture and functionality of the Intel 8255 PPI chip, including its ports, control word format, operating modes, and pin functions. Example programs are provided to initialize the 8255 ports in different configurations.
Abc2
This document provides an overview of microprocessors and the 8085 microprocessor. It discusses the functional blocks of a microprocessor including input/output devices, memory, and the central processing unit. It then covers the 8085 microprocessor in more detail including its features, registers, interrupts, instruction set, and data formats. Examples of instructions and the fetch-decode-execute cycle are provided. The document is intended to teach the basics of microprocessors and the 8085 to students.
8255 class
The 8255 is a programmable peripheral interface that provides 24 I/O ports that can be programmed for different modes. It has three 8-bit ports (PA, PB, PC) that can be individually programmed as inputs or outputs. Port C can also be programmed for bit set/reset operations. The ports support three I/O modes - mode 0 for simple I/O, mode 1 for I/O with handshake signals, and mode 2 for bidirectional I/O. The mode of operation for each port is selected by writing a control word.
Final project presentation
This project proposes a mobile robot platform with a wireless video camera that can transmit video to other devices and be controlled remotely. The robot uses an Arduino Mega 2560 microcontroller and ultrasonic sensors to detect obstacles and avoid collisions through motion planning software. Hardware components include a wireless camera, ultrasonic sensors, an L298N motor controller, and a sensor shield. The software enables obstacle avoidance, remote control, and differential steering to turn the robot. Future work may include adapting it to a flying platform and transmitting both video and audio wirelessly.
Datasheet rtu cathodic_protection
The document is describing an AutoLog Cathodic Protection RTU (remote terminal unit) which is a compact and high-specification solution for remotely monitoring and controlling pipeline cathodic protection systems. The AutoLog RTU can communicate directly with a control room SCADA system or through local base stations linked to SCADA over a company LAN network, providing unlimited coverage area. It is based on proven AutoLog technology and can be remotely programmed through a radio network.
The 8255 PPI
The Intel 8255 Programmable Peripheral Interface (PPI) chip contains three 8-bit ports (Port A, Port B, and Port C) that can be configured for input or output. It operates in either Bit Set/Reset (BSR) mode or Input/Output (I/O) mode. In BSR mode, individual pins of Port C can be set or reset. In I/O mode, the ports support three modes - Simple I/O (Mode 0), Strobed I/O (Mode 1), or Strobed Bi-directional I/O (Mode 2). The control register is used to configure the ports and select the operating mode.
8255 PPI
The document discusses interfacing concepts and the Intel 8255 Programmable Peripheral Interface chip. It provides information on:
- Memory mapped I/O and I/O mapped I/O interfacing techniques.
- The 8255 PPI chip which has 3 8-bit I/O ports (Ports A, B, and C) that can be configured as input or output ports. It operates in I/O mode or Bit Set/Reset mode.
- Control word formats for configuring the ports in different modes like Mode 0, 1, and 2 for I/O mode and Bit Set/Reset mode.
- Example programs to initialize the 8255 ports using control words for different
Microprocessor Interfacing and 8155 Features
The 8155 and 8156 microprocessor interface chips differ in that the 8155 has an active low Chip Enable (CE) signal, while the 8156 has an active high CE signal. The 8155 is a multifunction chip that contains RAM, I/O ports, and a timer. It has two 8-bit I/O ports, one 6-bit I/O port, a 14-bit counter/timer, 2Kb of RAM, and can be interfaced with the 8085 microprocessor. The document then provides details on the pinout, memory mapping, control register, port configurations, timer operation modes, and status register of the 8155 chip.
1203 Ppi 8155
The document discusses the 8155 Programmable Interface Adapter chip. It can be used to interface I/O devices to a microprocessor like the 8085. The 8155 has programmable I/O ports, a timer, and memory. It is programmed by writing control words to its control register. An example is given of using an 8155 to read temperature data from an ADC and display it on LEDs using handshaking between the 8155 and ADC ports. Pseudocode is provided to initialize the 8155 ports and timer, trigger ADC conversions, read the temperature values, and continuously display updated values.
Registrador GR200 - Hanyoung NUX (www.nammisa.com)
1. The GR200 is a touch-type graphic recorder that can monitor and record temperature, humidity, and other process data over time.
2. It has features like remote monitoring via smartphone, saving data to an SD card, various display options including trend graphs and text, and alarm notifications.
3. The recorder is available with different input and output channel options and can be used to monitor processes like temperature chambers and food sterilization.
Masibus 85 xx+ masibus precious _daq module.pdf
The 85XX? is an upgrade of the 85XX model with additional capabilities like multi-serial ports, Ethernet port, faster scanning speed, and an alphanumeric display. It is a modular and expandable device with 5 I/O slots to accommodate analog inputs, open collector outputs, or relay outputs. The 85XX? can be configured using user-friendly software or the front panel and has numeric and alphanumeric displays. It has one standard RS485 port with an option for a second RS485 port or Ethernet port for enhanced communication capabilities. The 8 relay outputs can be freely mapped and configured for alarm or trip functionality.
More Related Content
What's hot
Wireless data logger using rf communication
This document describes an automatic station indication system for railways that uses RF wireless communication to transmit information about upcoming stations from transmitters located at each station to a receiver installed in trains. The receiver is connected to a microcontroller that displays the station name on an LCD screen and plays a prerecorded voice message to announce stations to passengers. It allows passengers to know the next station to help prevent missing their stop.
1204 Ppi 8255
The document discusses the 8255 programmable parallel I/O device that can be used to interface I/O devices to a microprocessor like the 8085. It describes how the 8255 has three I/O ports (Port A, Port B, Port C) that can be configured using a control word. It then provides an example of interfacing an 8-bit analog to digital converter and temperature sensor to the 8255 ports to read temperature values using instructions like OUT, IN.
8255_utkarsh_kulshrestha
Presentation on IC 8255 programmable peripheral interface with complete description of modes and its examples.
An application of 8085 register interfacing with LCD
This ppt will guide you through the steps to interface a seven segment lcd with a 8085 microprocessor.
8255 Programmble Peripheral Interface
The document describes an experiment involving the Intel 8255 Programmable Peripheral Interface chip. It discusses:
1) The 8255 PPI chip's architecture which includes 3 8-bit I/O ports (A, B, C) that can be configured as input or output ports in different operating modes.
2) The two main operating modes - I/O mode and Bit Set/Reset mode. I/O mode has three sub-modes (Mode 0, 1, 2) for different handshake capabilities.
3) Examples of 8255 PPI applications in computers like the original IBM PC.
4) Example assembly language programs to configure the 8255 ports in different input/output modes
8255:ppi & 8259:pic
MICROPROCESSOR AND INTERFACING
8255A : ppi
8259A : pic
Basics of 8255A PPI
Different I/O mode of 8255A
Basics of 8259A PIC
Different interrupt mode of 8259A
Programming Mode of 8259A
8255 ppi
The 8255 PPI (Programmable Peripheral Interface) chip is used to interface I/O devices with microprocessors. It has 3 ports (A, B, and C) that are programmable and can operate in 3 different modes to handle input, output, and bidirectional data transfer with handshaking. Port C pins also act as handshake signals for ports A and B depending on the mode. The control word written to the 8255's control register determines which ports are inputs/outputs and the operating mode.
Microprocessors 8085 architecture
The microprocessor is the central processing unit of a computer. It is the heart of the computer. 8085 is one of the most popular 8-Bit microprocessors in India. Because of its unique characteristics of both industry and academics still regarded as standard this microprocessor.
8255 PPI or parallel interface
The 8255PPI is a programmable peripheral interface with 3 8-bit ports (A, B, C). Ports can be configured as input or output in different modes. It has 2 main modes - Bit Set/Reset for individual bit operations and I/O mode with submodes 0, 1, 2 for port configuration. Ports A and B can be used for simple I/O in mode 0 or handshake operations in mode 1. Mode 2 allows bidirectional data transfer on port A using port C pins as handshake signals.
Microprocessors 8085 pin diagram
The document summarizes the pin diagram of the 8085 microprocessor. It describes the various pins including the address bus pins A15-A8 that carry the most significant 8 bits of the memory/IO address and pins AD7-AD0 that carry the least significant 8 bits of the address and data bus. It also describes the control signals like RD, WR, and ALE, the status signals IO/M, S1 and S0, the power supply pins VCC and VSS, the clock signals X1, X2 and CLK OUT, the interrupt pins like TRAP, RST 7.5, RST 6.5, RST 5.5, and INTR, and the serial I
Clyde Broadcast (Arcs brochure v2)
ARCS is a software controlled routing system for radio stations with multiple studios and separate transmission
outputs. It is a customer configurable product, and can operate with a variety of routers from several different
manufacturers, which can be analog or digital.
Interfacing of 8255 IC By Er. Swapnil Kaware.
This document provides an overview of interfacing concepts and the Intel 8255 Programmable Peripheral Interface. It discusses the basic concepts of memory mapped I/O and I/O mapped I/O. It then describes the architecture and functionality of the Intel 8255 PPI chip, including its ports, control word format, operating modes, and pin functions. Example programs are provided to initialize the 8255 ports in different configurations.
Abc2
This document provides an overview of microprocessors and the 8085 microprocessor. It discusses the functional blocks of a microprocessor including input/output devices, memory, and the central processing unit. It then covers the 8085 microprocessor in more detail including its features, registers, interrupts, instruction set, and data formats. Examples of instructions and the fetch-decode-execute cycle are provided. The document is intended to teach the basics of microprocessors and the 8085 to students.
8255 class
The 8255 is a programmable peripheral interface that provides 24 I/O ports that can be programmed for different modes. It has three 8-bit ports (PA, PB, PC) that can be individually programmed as inputs or outputs. Port C can also be programmed for bit set/reset operations. The ports support three I/O modes - mode 0 for simple I/O, mode 1 for I/O with handshake signals, and mode 2 for bidirectional I/O. The mode of operation for each port is selected by writing a control word.
Final project presentation
This project proposes a mobile robot platform with a wireless video camera that can transmit video to other devices and be controlled remotely. The robot uses an Arduino Mega 2560 microcontroller and ultrasonic sensors to detect obstacles and avoid collisions through motion planning software. Hardware components include a wireless camera, ultrasonic sensors, an L298N motor controller, and a sensor shield. The software enables obstacle avoidance, remote control, and differential steering to turn the robot. Future work may include adapting it to a flying platform and transmitting both video and audio wirelessly.
Datasheet rtu cathodic_protection
The document is describing an AutoLog Cathodic Protection RTU (remote terminal unit) which is a compact and high-specification solution for remotely monitoring and controlling pipeline cathodic protection systems. The AutoLog RTU can communicate directly with a control room SCADA system or through local base stations linked to SCADA over a company LAN network, providing unlimited coverage area. It is based on proven AutoLog technology and can be remotely programmed through a radio network.
The 8255 PPI
The Intel 8255 Programmable Peripheral Interface (PPI) chip contains three 8-bit ports (Port A, Port B, and Port C) that can be configured for input or output. It operates in either Bit Set/Reset (BSR) mode or Input/Output (I/O) mode. In BSR mode, individual pins of Port C can be set or reset. In I/O mode, the ports support three modes - Simple I/O (Mode 0), Strobed I/O (Mode 1), or Strobed Bi-directional I/O (Mode 2). The control register is used to configure the ports and select the operating mode.
8255 PPI
The document discusses interfacing concepts and the Intel 8255 Programmable Peripheral Interface chip. It provides information on:
- Memory mapped I/O and I/O mapped I/O interfacing techniques.
- The 8255 PPI chip which has 3 8-bit I/O ports (Ports A, B, and C) that can be configured as input or output ports. It operates in I/O mode or Bit Set/Reset mode.
- Control word formats for configuring the ports in different modes like Mode 0, 1, and 2 for I/O mode and Bit Set/Reset mode.
- Example programs to initialize the 8255 ports using control words for different
Microprocessor Interfacing and 8155 Features
The 8155 and 8156 microprocessor interface chips differ in that the 8155 has an active low Chip Enable (CE) signal, while the 8156 has an active high CE signal. The 8155 is a multifunction chip that contains RAM, I/O ports, and a timer. It has two 8-bit I/O ports, one 6-bit I/O port, a 14-bit counter/timer, 2Kb of RAM, and can be interfaced with the 8085 microprocessor. The document then provides details on the pinout, memory mapping, control register, port configurations, timer operation modes, and status register of the 8155 chip.
1203 Ppi 8155
The document discusses the 8155 Programmable Interface Adapter chip. It can be used to interface I/O devices to a microprocessor like the 8085. The 8155 has programmable I/O ports, a timer, and memory. It is programmed by writing control words to its control register. An example is given of using an 8155 to read temperature data from an ADC and display it on LEDs using handshaking between the 8155 and ADC ports. Pseudocode is provided to initialize the 8155 ports and timer, trigger ADC conversions, read the temperature values, and continuously display updated values.
What's hot (20)
An application of 8085 register interfacing with LCD
An application of 8085 register interfacing with LCD
Similar to Registrador multicanal GR100 Hanyoung nux
Registrador GR200 - Hanyoung NUX (www.nammisa.com)
1. The GR200 is a touch-type graphic recorder that can monitor and record temperature, humidity, and other process data over time.
2. It has features like remote monitoring via smartphone, saving data to an SD card, various display options including trend graphs and text, and alarm notifications.
3. The recorder is available with different input and output channel options and can be used to monitor processes like temperature chambers and food sterilization.
Masibus 85 xx+ masibus precious _daq module.pdf
The 85XX? is an upgrade of the 85XX model with additional capabilities like multi-serial ports, Ethernet port, faster scanning speed, and an alphanumeric display. It is a modular and expandable device with 5 I/O slots to accommodate analog inputs, open collector outputs, or relay outputs. The 85XX? can be configured using user-friendly software or the front panel and has numeric and alphanumeric displays. It has one standard RS485 port with an option for a second RS485 port or Ethernet port for enhanced communication capabilities. The 8 relay outputs can be freely mapped and configured for alarm or trip functionality.
WJ69产品说明书V1.1.pdf
The document describes the WJ69 encoder pulse counter module. It has the following key features:
1. It can decode signals from 8 encoders simultaneously and identify the direction of rotation. It can also function as 16 independent digital input counters.
2. It supports RS-485 and RS-232 communication and the Modbus RTU protocol to interface with PLCs, RTUs and computer monitoring systems.
3. It has applications in encoder signal measurement, flow meter counting, product counting, switch status measurement, and transmitting encoder signals to industrial computers.
Lensen products introduction
Shenzhen Qianhai Lensen Technology Introduction
Products application guide
how to use wireless control
Modbus RTU application example
Orpak Outdoor Secure Payment Terminal
All-In-One Robust Outdoor Secure Payment Terminal. Includes Magnetic Cards, Chip and Pin, Contactless and Bar Code Scanner.
Catalog PLC IDEC-Beeteco.com
Catalog: PLC IDEC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
This is a Ramp
This document summarizes the features and capabilities of a V560 Ramp/Soak controller. It has a 5.7-inch color touchscreen, supports up to 1000 I/O including digital, analog, temperature and weight signals. It can run 24 PID loops with autotuning and store up to 500 images. Communication options include cellular, Ethernet, CANbus and Modbus. It also has data logging, recipe management, web server functionality and multiple language support. The controller accepts various input types and has multiple output options including relays and analog outputs. Screenshots show it can run 3-step ramp/soak programs and display trends of setpoint, process variable and control variable.
Приводы Xenus 120-240 Copley Controls
The document describes the Xenus XTL digital servo drive for brushless and brush motors. Some key points:
1. The Xenus drive combines CANopen networking with 100% digital control of brushless or brush motors in an off-line powered package that can operate from single or three-phase mains with continuous power output up to 4 kW.
2. It operates as a Motion Control Device under the DSP-402 protocol of the CANopen application layer and supports modes like Profile Position, Profile Velocity, Profile Torque, and Homing.
3. Drive commissioning is fast and simple using CME 2 software via CAN or RS-232 communication. Address selection is by a 16-position
Cpu224 xp eth-manual
CPU224XP Ethernet borad
CPU224XP Digital 14input 10output/CPU226XP Digital 24input 16output
Analog 2 channel input/1 channel output
DC24V 1A
2 channel PPI port(support Modbus)
Comes with a perpetual calendar, which can be maintained for 2 years after power failure
PPI communication interface supports 187.5K, supports Modbus protocol
Up to 7 modules can be connected
Automatic saving of power-down data
Software supports all instructions in Siemens v4.0 Step 7
Catalogo_CoTrust mail.pdf
1) The document discusses Trust PLC's CTS7-100 series of programmable logic controllers (PLCs), including their CPU modules and expansion modules.
2) The CTS7-100 PLCs offer high performance for small-to-medium scale automation systems with fast execution speeds, robust instruction sets, and strong communication abilities.
3) The modular design allows for flexible I/O expansion to suit different application needs through connecting various digital, analog, and special function modules.
E-POS Xtreme turbo v2
This document describes the Xtreme Turbo V2 15-inch POS touch terminal. It has an Intel Celeron processor, supports up to 16GB of RAM and SSD or HDD storage. Ports include HDMI, VGA, USB, LAN, audio jack. It runs Windows and Linux and has an adjustable 15-inch touchscreen. Optional accessories include printers, customer displays, and peripheral devices like card readers. The terminal provides a powerful and flexible POS solution for applications in retail, restaurants, banks, and more.
SENECA I/O distributed system
The document discusses Seneca's CANopen distributed I/O system solution. It provides an overview of Seneca's digital and analog I/O modules that directly connect to the CANopen network without needing additional couplers. The modules offer features like fast response times, accuracy, multiple configuration options, and isolation. Traditional I/O systems require couplers that increase costs, while Seneca's distributed solution reduces wiring and allows flexible placement of I/O nodes on the network.
Arc900 v1.1.8en
The ARC900 series paperless recorder has multi-channel data logging capabilities with high accuracy. It can record input signals from up to 16 channels, display data on a 5.6" LCD screen, and store recorded data on USB/SD memory cards. Key features include high accuracy of +/-0.15% of reading, relay and 4-20mA outputs, and data storage for over 789 years with optional memory cards.
Mini plc-programmable logic controller
A Programmable Logic Controller (PLC) is a ruggedized industrial logic controller that can control a specific process, machine function, or even an entire production line for industries, including but not limited to: petroleum, steel, automotive, aerospace, printing, food, textile, medical, corrugating, plastics, etc. PLCs are flexible and adaptable to almost any application.
Gt1020 1030 datasheet
The document discusses Mitsubishi Electric's GT1020 and GT1030 series of Graphic Operation Terminals (GOTs). It summarizes that the GOTs feature bright 3.7- and 4.5-inch touch screens, innovative alarming and messaging functions, multi-language support, and flexible mounting options. The GOTs can be used for applications like monitoring tank levels, temperatures, and flow rates.
HB-8211F
This document describes the features and specifications of a multi-function digital indicator. It has high-speed data conversion, high resolution of over 10 million counts, and interfaces for load cells, RS-232, RS-485, and printing. The indicator is designed for industrial weighing applications and has functions like digital calibration and configuration of parameters.
PIC16F877A interfacing with LCD
The document discusses the PIC16F877A microcontroller. It provides details about its architecture, memory organization, peripherals like timers and serial communication modules, interrupts, and how to interface it with an LCD display. The PIC16F877A is a Harvard architecture microcontroller with an in-built ADC. It has program memory, data memory, timers, serial communication capabilities using SPI and I2C protocols, and 15 interrupt sources. Code examples are given to initialize and send data to a 16x2 LCD display using the PIC16F877A.
Ft1 a idec
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng IDEC IZUMI: đèn báo nút nhấn, relay, timer, PLC, màn hình idec...www.haophuong.com
PXIE-brochure-A4 smaller
This document summarizes a 4-channel PXIe data acquisition board for ultrasound systems from Pragma Solutions. The board can sample up to 1 GHz and provides sustained data transfer rates up to 90 MB/sec. It is compatible with National Instruments PXI card cages and is scalable by adding multiple boards. Both the firmware and software are customizable, making the board well-suited for ultrasound applications and system integration.
Similar to Registrador multicanal GR100 Hanyoung nux (20)
Registrador GR200 - Hanyoung NUX (www.nammisa.com)
Registrador GR200 - Hanyoung NUX (www.nammisa.com)
More from Hanyoung NUX
Controlador digital de temperatura Hanyoung NUX - www.nammisa.com
El documento describe las características y funciones de un controlador de procesos, incluyendo múltiples entradas y salidas, control PID, operación de control directa e inversa, display doble, entrada de sensor y salida de alarma de alta velocidad. También menciona que el controlador AX Series ocupa menos espacio de instalación que los controladores convencionales debido a su profundidad reducida de 63mm. Finalmente, proporciona información de contacto de la representante exclusiva de Hanyoung Nux en Perú y Ecuador.
Hanyoung NUX - AX4 - www.nammisa.com
Este documento explica cómo compensar la lectura de un sensor de temperatura en un controlador AX Series. Para acceder al parámetro de compensación BIAS, el usuario debe presionar los botones y simultáneamente durante 2 segundos para ingresar al modo de programación. En el parámetro BIAS, el usuario puede aumentar o disminuir el valor de entrada leído para compensar la diferencia entre la lectura del sensor y el valor real. Por ejemplo, si el sensor muestra 80°C pero la temperatura real es de 85°C, el usuario puede programar un valor de compensación de
Timer analógico - Hanyoung NUX(nammisa.com)
This document provides information on various timers and their descriptions, including the Analog Timer MA4N, Digital Timer LF4N, Analog Timers T38N/T48N/T57N/TF62N/TF62D, and the Digital Dual Timer TT4-P42A/P42B. Contact information is given for HANYOUNG NUX CO., LTD., located in Incheon, Korea, which produces these timers. Specifications are subject to change without notice.
Luces señalización Hanyoung NUX(nammisa sac)
This document provides technical information about Hynux, a leading Korean corporation that specializes in automatic control measurement devices. It lists their products such as temperature controllers, counters, timers, sensors, and switches. Contact information is also provided, including their address, phone number, website, and email for overseas sales inquiries.
Timer analógicos - Hanyoung NUX(www.nammisa.com)
This document provides information on various timers and their descriptions, including the Analog Timer MA4N, Digital Timer LF4N, Analog Timers T38N/T48N/T57N/TF62N/TF62D, and the Digital Dual Timer TT4-P42A/P42B. It also lists the manufacturer's contact information and disclaimer that all specifications are subject to change without notice.
Controlador KXN Hanyoung NUX (www.nammisa.com
This document provides information about the functions and operation of a digital temperature controller. It describes the display units including PV, SV, and alarm indicators. It explains the auto-tuning function that automatically sets PID constants. It outlines the set data lock function to prevent changes to settings. It also details alarm types, input scaling, anti-reset windup, control mode selection and model code information.
TH500 Controlador Humedad y temperatura Hanyoung NUX (www.nammisa,com)
This document describes a programmable temperature and humidity controller that offers high accuracy control, history management with 300 pattern settings, PID control of temperature and humidity, and various communication and output options. It is produced by a leading Korean corporation specializing in automatic control measurement. The controller can be conveniently set via a touch panel and stores operation logs and errors for review.
TD500 Controlador doble canal. Hanyoung NUX (www.nammisa.com)
This document describes a 2-channel programmable temperature controller that features a touch screen LCD display, 4 PID control zones, universal input, 8-point time signals, 4-point alarm outputs, heating and cooling control outputs, 8-point contact inputs, 16-point contact outputs, and communication functions. It provides specifications and contact information for Hanyoung Nux Co., Ltd, the manufacturer located in Incheon, Korea.
HX Controlador temperatura Hanyoung NUX (www.nammisa.com)
Hynux is a world leader in control and measurement that produces a line of digital temperature controllers called the HX series. The HX series offers economical, convenient and fast temperature control with high accuracy through features like multi-input sensors, multi-output control, fast sampling cycles, and minimal installation depth. The HX series is available in different models and dimensions to suit various applications.
Productos esenciales hanyoung nux
1. The document describes products from Hynux, a world leader in control and measurement.
2. It lists several temperature controllers, sensors, switches, counters, timers, relays, and other industrial control and measurement devices.
3. The products are designed for applications such as temperature control, counting, timing, switching, sensing distance and light, and relaying signals in industrial automation and control systems.
Novedades Hanyoung NOV-DIC 13
Hanyoung participated in the 2013 Korea Machinery Fair held from October 16-19, where they introduced several new products including digital temperature controllers, HMIs, graphic recorders, solid state relays, multi-loop controllers, proximity sensors and photo sensors. Hanyoung's HMI TG series in various screen sizes of 5, 7, 10, 12, 15 inches attracted many visitors and is expected to be a top-selling product. The fair was held at KINTEX and combined several major capital exhibitions, making it Korea's largest exhibition.
Ax (1)
This document summarizes a digital temperature controller. It has multi-input and multi-output capabilities, with a high speed 0.1 second sampling cycle for precise temperature control. It offers economical pricing and convenient functions like high accuracy temperature control and a compact 63mm installation depth. Key features include PID control, relay and SSR outputs, Celsius or Fahrenheit display, and models with different dimensions and input/output configurations.
More from Hanyoung NUX (13)
Controlador digital de temperatura Hanyoung NUX - www.nammisa.com
Controlador digital de temperatura Hanyoung NUX - www.nammisa.com
TH500 Controlador Humedad y temperatura Hanyoung NUX (www.nammisa,com)
TH500 Controlador Humedad y temperatura Hanyoung NUX (www.nammisa,com)
TD500 Controlador doble canal. Hanyoung NUX (www.nammisa.com)
TD500 Controlador doble canal. Hanyoung NUX (www.nammisa.com)
HX Controlador temperatura Hanyoung NUX (www.nammisa.com)
HX Controlador temperatura Hanyoung NUX (www.nammisa.com)
Recently uploaded
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Free A4 downloadable and printable Cyber Security, Social Engineering Safety and security Training Posters . Promote security awareness in the home or workplace. Lock them Out From training providers datahops.com
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Astute Business Solutions | Oracle Cloud Partner |
Your goto partner for Oracle Cloud, PeopleSoft, E-Business Suite, and Ellucian Banner. We are a firm specialized in managed services and consulting.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
What is an RPA CoE? Session 1 – CoE Vision
In the first session, we will review the organization's vision and how this has an impact on the COE Structure.
Topics covered:
• The role of a steering committee
• How do the organization’s priorities determine CoE Structure?
Speaker:
Chris Bolin, Senior Intelligent Automation Architect Anika Systems
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Folding is a recent technique for building efficient recursive SNARKs. Several elegant folding protocols have been proposed, such as Nova, Supernova, Hypernova, Protostar, and others. However, all of them rely on an additively homomorphic commitment scheme based on discrete log, and are therefore not post-quantum secure. In this work we present LatticeFold, the first lattice-based folding protocol based on the Module SIS problem. This folding protocol naturally leads to an efficient recursive lattice-based SNARK and an efficient PCD scheme. LatticeFold supports folding low-degree relations, such as R1CS, as well as high-degree relations, such as CCS. The key challenge is to construct a secure folding protocol that works with the Ajtai commitment scheme. The difficulty, is ensuring that extracted witnesses are low norm through many rounds of folding. We present a novel technique using the sumcheck protocol to ensure that extracted witnesses are always low norm no matter how many rounds of folding are used. Our evaluation of the final proof system suggests that it is as performant as Hypernova, while providing post-quantum security.
Paper Link: https://eprint.iacr.org/2024/257
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Dmitrii Kamaev, PhD
Senior Product Owner - QIAGEN
The Microsoft 365 Migration Tutorial For Beginner.pptx
This presentation will help you understand the power of Microsoft 365. However, we have mentioned every productivity app included in Office 365. Additionally, we have suggested the migration situation related to Office 365 and how we can help you.
You can also read: https://www.systoolsgroup.com/updates/office-365-tenant-to-tenant-migration-step-by-step-complete-guide/
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
Tomaz Bratanic
Graph ML and GenAI Expert - Neo4j
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/how-axelera-ai-uses-digital-compute-in-memory-to-deliver-fast-and-energy-efficient-computer-vision-a-presentation-from-axelera-ai/
Bram Verhoef, Head of Machine Learning at Axelera AI, presents the “How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-efficient Computer Vision” tutorial at the May 2024 Embedded Vision Summit.
As artificial intelligence inference transitions from cloud environments to edge locations, computer vision applications achieve heightened responsiveness, reliability and privacy. This migration, however, introduces the challenge of operating within the stringent confines of resource constraints typical at the edge, including small form factors, low energy budgets and diminished memory and computational capacities. Axelera AI addresses these challenges through an innovative approach of performing digital computations within memory itself. This technique facilitates the realization of high-performance, energy-efficient and cost-effective computer vision capabilities at the thin and thick edge, extending the frontier of what is achievable with current technologies.
In this presentation, Verhoef unveils his company’s pioneering chip technology and demonstrates its capacity to deliver exceptional frames-per-second performance across a range of standard computer vision networks typical of applications in security, surveillance and the industrial sector. This shows that advanced computer vision can be accessible and efficient, even at the very edge of our technological ecosystem.5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Recently uploaded (20)
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
FREE A4 Cyber Security Awareness Posters-Social Engineering part 3
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Astute Business Solutions | Oracle Cloud Partner |
Astute Business Solutions | Oracle Cloud Partner |
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
9 CEO's who hit $100m ARR Share Their Top Growth Tactics Nathan Latka, Founde...
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Deep Dive: AI-Powered Marketing to Get More Leads and Customers with HyperGro...
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
zkStudyClub - LatticeFold: A Lattice-based Folding Scheme and its Application...
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
Biomedical Knowledge Graphs for Data Scientists and Bioinformaticians
The Microsoft 365 Migration Tutorial For Beginner.pptx
The Microsoft 365 Migration Tutorial For Beginner.pptx
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
GraphRAG for LifeSciences Hands-On with the Clinical Knowledge Graph
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
“How Axelera AI Uses Digital Compute-in-memory to Deliver Fast and Energy-eff...
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
Registrador multicanal GR100 Hanyoung nux
- 2. Bright color TFT LCD & Touch panel system Bright color TFT LCD & Touch panel system Various input types (T/C 12 kinds, R.T.D 2 kinds, DC voltage 3 kinds) Horizontal & Vertical trend, Text, Bar graph, History view 6 or 12 channel analog inputs, 6 external inputs (D/I), 6 or 12 relay outputs (D/O) 4 alarms per channel Computing, Function, Conversion function RS232, RS422/485, USB, ETHERNET communication (MODBUS-RTU, MODBUS on TCP) Support Large capacity SD memory card (FAT 16 / 32) FEATURES Leading high-tech Corporation In Measurement Field of Automatic Control GR100
- 6. www.hynux.comwww.hynux.net Leading high-tech corporation in measurement field of Automatic Control 1381-3, Juan-Dong, Nam-Gu Incheon, Korea TEL : (82-32)876-4697 FAX : (82-32)876-4696 E-mail : hyelec01@hynux.com All specifications are subject to change without prior notice, and when you place order, please consult HANYOUNG NUX CO., LTD.