Tha lathe machine
•Download as PPTX, PDF•
0 likes•288 views
The document summarizes the main components of a lathe machine, including the bed which provides a rigid frame, the headstock for rotating workpieces, ways to guide movement, a tailstock for supporting other ends of long workpieces, and a carriage for tooling that can move along the ways.
Report
Share
Report
Share
Recommended
Bearings and rodjoints definitions CBSE Class XII Engineering Graphics 2015
Bearings are used to reduce friction between moving machine parts and support rotating components like shafts. There are two main types of bearings: plain bearings, which support sliding and rotational motion directly, and anti-friction or roller bearings, which use balls or rollers to further reduce friction. Journal bearings surround shafts at right angles and include types like open, bushed, plummer block, and pivot bearings. Cotter joints connect rods rigidly to transmit axial forces without rotation using a wedge-shaped cotter pin. Sleeve and cotter joints connect circular rods using a hollow steel sleeve and cotter pin.
Machine element,
The document discusses different types of machine elements used for joining parts, including fasteners, screws, bolts, nuts, keys, and cotter joints. It describes various thread types like V-threads, square threads, and ACME threads. It also explains different forms of bolts, nuts, keys, and cotter joints; when each type would be used; and how they function to join parts together both permanently and temporarily.
Slotting machine (slotter)
The document summarizes the main parts and specifications of a slotting machine. A slotting machine has a vertical ram and rotary table that allows for vertical cutting movement. The main parts include a base, column, table, and ram. The ram moves vertically to perform the cutting, guided by the column. Typical specifications for a 300mm stroke slotter include a 300mm maximum stroke, 450mm height between table and head, and dimensions for the table, bed, and overall machine. It is belt driven and requires 2HP power.
01 part1 02 parts of a lathe
The document describes the main parts of a lathe, including the headstock, carriage, lathe bed, tailstock, cross slide, feed shaft, lead screw, chuck, toolpost, tool holders, and cutting tools. The headstock holds the spindle and gears. The carriage moves the cutting tool along the lathe bed. The lathe bed is made of cast iron and guides the carriage and tailstock.
Basic mechanical-engineering
This document provides an overview of basic mechanical engineering concepts related to shafts and keys. It defines a machine as a device that consists of various elements to perform prescribed tasks to satisfy human needs. Shafts are described as rotating members used to transmit power or motion between machine elements like gears and pulleys. There are two main types of shafts: transmission shafts that transmit power from the power source to the machine, and machine shafts within the machine itself. Keys are used to connect shafts to rotating elements like pulleys and gears. There are several types of keys that vary in shape, taper, and application depending on the mechanical needs. The document outlines the key properties, materials, and common types used in mechanical engineering.
Parts of the lathe machine
The document summarizes the main parts of a lathe machine. It lists 15 key components: the headstock, spindle, chuck, tool post, compound rest, cross slide, carriage, ways, tailstock quill, tailstock assembly, bed, lead screw, feed rod, longitudinal and transverse feed control, and split nut. The carriage, ways, and apron are involved in moving cutting tools into the workpiece. The headstock, spindle, chuck, and tailstock quill are used to hold and rotate the material being machined.
Machine elements
This document discusses different machine elements used in machines. It describes power transmitting elements like shafts, gears, pulleys and cams that transmit power from one part of a machine to another. Holding elements like nuts, bolts and pins are used to hold machine parts together. Supporting elements like bearings and brackets provide structural support. Specific power transmitting elements discussed in more detail include shafts, gears, pulleys, cams and chains. Bearings are described as machine elements that support rotating or moving parts. Different types of bearings and couplings are also summarized.
Manufacturing Processes 38
Up milling, also called conventional milling, involves the cutter rotating against the direction of feed, generating more heat from friction. It is generally used for rough cutting. Down milling involves the cutter rotating in the same direction as feed, generating less heat. It produces a better surface finish and is generally used for finishing operations due to longer tool life. The document provides definitions, differences, advantages and applications of up milling and down milling.
Recommended
Bearings and rodjoints definitions CBSE Class XII Engineering Graphics 2015
Bearings are used to reduce friction between moving machine parts and support rotating components like shafts. There are two main types of bearings: plain bearings, which support sliding and rotational motion directly, and anti-friction or roller bearings, which use balls or rollers to further reduce friction. Journal bearings surround shafts at right angles and include types like open, bushed, plummer block, and pivot bearings. Cotter joints connect rods rigidly to transmit axial forces without rotation using a wedge-shaped cotter pin. Sleeve and cotter joints connect circular rods using a hollow steel sleeve and cotter pin.
Machine element,
The document discusses different types of machine elements used for joining parts, including fasteners, screws, bolts, nuts, keys, and cotter joints. It describes various thread types like V-threads, square threads, and ACME threads. It also explains different forms of bolts, nuts, keys, and cotter joints; when each type would be used; and how they function to join parts together both permanently and temporarily.
Slotting machine (slotter)
The document summarizes the main parts and specifications of a slotting machine. A slotting machine has a vertical ram and rotary table that allows for vertical cutting movement. The main parts include a base, column, table, and ram. The ram moves vertically to perform the cutting, guided by the column. Typical specifications for a 300mm stroke slotter include a 300mm maximum stroke, 450mm height between table and head, and dimensions for the table, bed, and overall machine. It is belt driven and requires 2HP power.
01 part1 02 parts of a lathe
The document describes the main parts of a lathe, including the headstock, carriage, lathe bed, tailstock, cross slide, feed shaft, lead screw, chuck, toolpost, tool holders, and cutting tools. The headstock holds the spindle and gears. The carriage moves the cutting tool along the lathe bed. The lathe bed is made of cast iron and guides the carriage and tailstock.
Basic mechanical-engineering
This document provides an overview of basic mechanical engineering concepts related to shafts and keys. It defines a machine as a device that consists of various elements to perform prescribed tasks to satisfy human needs. Shafts are described as rotating members used to transmit power or motion between machine elements like gears and pulleys. There are two main types of shafts: transmission shafts that transmit power from the power source to the machine, and machine shafts within the machine itself. Keys are used to connect shafts to rotating elements like pulleys and gears. There are several types of keys that vary in shape, taper, and application depending on the mechanical needs. The document outlines the key properties, materials, and common types used in mechanical engineering.
Parts of the lathe machine
The document summarizes the main parts of a lathe machine. It lists 15 key components: the headstock, spindle, chuck, tool post, compound rest, cross slide, carriage, ways, tailstock quill, tailstock assembly, bed, lead screw, feed rod, longitudinal and transverse feed control, and split nut. The carriage, ways, and apron are involved in moving cutting tools into the workpiece. The headstock, spindle, chuck, and tailstock quill are used to hold and rotate the material being machined.
Machine elements
This document discusses different machine elements used in machines. It describes power transmitting elements like shafts, gears, pulleys and cams that transmit power from one part of a machine to another. Holding elements like nuts, bolts and pins are used to hold machine parts together. Supporting elements like bearings and brackets provide structural support. Specific power transmitting elements discussed in more detail include shafts, gears, pulleys, cams and chains. Bearings are described as machine elements that support rotating or moving parts. Different types of bearings and couplings are also summarized.
Manufacturing Processes 38
Up milling, also called conventional milling, involves the cutter rotating against the direction of feed, generating more heat from friction. It is generally used for rough cutting. Down milling involves the cutter rotating in the same direction as feed, generating less heat. It produces a better surface finish and is generally used for finishing operations due to longer tool life. The document provides definitions, differences, advantages and applications of up milling and down milling.
Basic Mechanical Engineering -Mechanical Elements
The document discusses various mechanical elements used in mechanical engineering. It describes components like shafts, keys, couplings, bearings, clutches, and brakes. It also covers power transmission devices like belt drives, chain drives, and different types of gears. The document provides classifications, working principles, applications and diagrams of these common mechanical elements and power transmission systems used in machinery.
Notes simple machines
There are 6 simple machines: the lever, inclined plane, wheel and axle, screw, wedge, and pulley. They were first defined by Renaissance scientists and make work easier by changing the direction or magnitude of forces. Simple machines allow an applied force to work against a load through mechanical advantage. They transform energy rather than create it, as discovered by Galileo. Each machine functions differently based on its design and placement of fulcrums.
Pin&joints 200607
A cotter joint connects two rods subjected to tensile or compressive stress along their axes. It uses a tapered, rectangular steel cotter that is inserted through slots in the ends of the rods at a high angle to their axes. The cotter pulls the rods tightly together and its tapered shape and narrow ends facilitate installation and removal. A gib and cotter joint is similar but used for rods with square or rectangular cross sections, with a gib added that is like a cotter but has heads on both ends. These joints are not suitable when the rods are subjected to rotation.
Work holding
This document discusses various methods for work holding on milling machines. It describes milling vises, soft jaws, parallels, and work stops as basic styles of work holding. It provides examples of different types of jaws, such as hardened jaws, standard jaws, step jaws, and jaws with built-in work stops. It also discusses uses of soft jaws, parallels, parallel keepers, and different styles of work stops, including vise mounted, table mounted, and clamp on styles. Finally, it mentions other work holding methods like 5-C collet holders, angle blocks, and V-blocks.
Unit1 161021055929
This document provides an introduction to machine elements and power transmission devices taught in the second semester of a mechanical engineering course. It discusses various machine elements like shafts, keys, couplings, bearings, clutches, and brakes. For power transmission devices, it covers belts, chains, and gear drives. The introduction describes machine elements as components that perform specific functions like holding parts together, transmitting power, or providing support. It then categorizes common elements and provides examples.
Riveted joints
Riveted joints use rivets to permanently fasten two materials together. A rivet has a hemispherical head on one side and a cylindrical shaft on the other. During installation, the tail of the rivet is deformed to expand its diameter and hold the rivet in place. Common riveted joint types include lap joints, where the ends of two materials overlap with coinciding holes, and butt joints, where two materials are joined edge to edge using an external cover plate riveted through parallel holes. Riveted joints can be single rivet joints with one rivet in a row, or double rivet joints with two rows of rivets.
Shaft couplings
.............................................................................................................................
Couplings
This document discusses different types of couplings used to connect shafts for power transmission. It describes rigid couplings like flanged, split, and keyed couplers used for aligned shafts. It also covers flexible couplings like universal joints, constant velocity joints, and flexible discs used to connect non-aligned shafts, allowing for some angular misalignment between the shafts during operation. A variety of coupling types exist to transmit power between shafts in different alignment configurations.
Powertransmissiondevices 190305101005
The document discusses various types of power transmission devices used to transfer motion and power between rotating shafts, including belt drives, chain drives, and gear drives. Belt drives can be flat, V-belt, timing or circular belts and are used to connect shafts over long distances. Chain drives use sprocket wheels connected by roller or silent chains. Gear drives include spur gears, helical gears, bevel gears, and worm gears to connect parallel, intersecting, or perpendicular shaft axes. Couplings like sleeve, split, flange, bush pin, and universal joints are also discussed for connecting shafts while allowing some misalignment or movement.
BASIC MECHANICAL ENGINEERING
This document provides an introduction to machine elements and power transmission devices taught in the second semester of a mechanical engineering course. It discusses various machine elements like shafts, keys, couplings, bearings, clutches, and brakes. It also covers power transmission devices such as belt drives, chain drives, and gear drives. The document describes the function, types, materials, and design of these common mechanical components.
Flat Spiral Springs used in Toys
Flat spiral springs are wound coils used in toys and various applications to store mechanical energy. The inner end is fixed while the outer end is clamped, allowing the spring to wind and unwind like a clock. As the arbor rotates during winding, energy is stored in the bent strip of high-quality steel or alloy. When unwound, this stored energy is released as torque on the drum. Key parameters like thickness, length, width, and distance from center are used to calculate stress, strain, deflection and energy storage in the flat spiral spring.
Lathe machine
Lathe is one of the most important machine tools in the metal working industry. A lathe operates on the principle of a rotating work-piece and a fixed cutting tool.
Lathe machine also called “Engine Lathe” because the first type of lathe was driven by a steam engine
Worm amd worm wheel
Worm gears allow rotational speed and torque to be controlled. They are commonly used for tuning stringed musical instruments, in elevator machinery, and differentials in vehicles. Worm gears provide mechanical advantage through gear reduction, allowing smaller rotational forces to overcome larger resistive loads.
Shaft & keys (machine design & industrial drafting )
This document discusses different types of shafts, keys, and their design considerations. It contains the following key points:
1. Shafts can be classified based on their shape (solid or hollow), application (transmitting, machine, spindle), and construction (rigid or flexible).
2. Keys are used to connect rotating machine elements to shafts and prevent relative motion. Common types include rectangular, square, parallel, gib-head, feather, and woodruff keys.
3. Shaft design considers factors like bending moment, shear stress, and material properties. Hollow shafts have higher strength-to-weight ratio than solid shafts of the same size.
Unit 6 mechanism and applications
Centrifugal pumps and compressors are power absorbing devices that use centrifugal force to increase the pressure of fluids and gases respectively. Centrifugal pumps have an impeller and casing that spin fluid at high velocities, converting kinetic energy to pressure energy. Centrifugal compressors accelerate gas velocities using an impeller and diffuser, converting the increased kinetic energy to pressure. Both are commonly used where high flow rates and moderate pressure increases are required. Belt and chain drives transmit power between parallel shafts using pulleys or sprockets connected by a belt or chain. They are used widely in industrial and domestic applications like conveyors, compressors, and bicycles.
Couplings
The document discusses different types of couplings used to connect shafts for power transmission. It describes rigid couplings like flanged, split, keyed, and friction couplings which are used for aligned shafts. It also describes flexible couplings like universal joints, constant velocity joints, and flexible couplings that allow for non-aligned shafts and compensate for changes in angular misalignment between the shafts.
Shaft couplings by Sheharyar khan (Uet Lahore)
This lesson is from the subject Machine design, and it is very important on the subject point of view that how shafts and couplings are important while designing a machine.
Lathe ppt
The document describes the lathe, which is a versatile machine tool used to shape materials by rotating the workpiece against various cutting tools. It discusses the main components of a lathe like the bed, headstock, tailstock, carriage, and feed mechanism. It also explains common operations performed on a lathe like turning, drilling, boring, knurling, and tapering.
008 threading
The document discusses various threading tools and procedures. It covers different types of taps such as taper, plug, and bottoming taps. It also discusses tap drill sizes, threading dies, and machine screws. Common thread standards covered include American National and Metric systems. Proper techniques are outlined for tapping holes and using dies.
My future prediction jairo
The author plans to move with their family to Rio de Janeiro, buy a house they like in Ibagué, change their truck in two months, continue their professional studies, play in a golf tournament, and take a vacation in the Caribbean.
Vivek Kant Mohit.
Vivek Kant Mohit is seeking an associate position in a progressive BFSI organization. He has 2 years of experience in manual software testing with expertise in STLC, SDLC lifecycles, test case development, and defect tracking. His skills include Agile methodology, SQL, root cause analysis, and he has experience testing various banking applications such as loans, internet banking, credit cards, and more. He holds an ISTQB certification and has a Bachelor's degree in Electronics and Communication Engineering.
More Related Content
What's hot
Basic Mechanical Engineering -Mechanical Elements
The document discusses various mechanical elements used in mechanical engineering. It describes components like shafts, keys, couplings, bearings, clutches, and brakes. It also covers power transmission devices like belt drives, chain drives, and different types of gears. The document provides classifications, working principles, applications and diagrams of these common mechanical elements and power transmission systems used in machinery.
Notes simple machines
There are 6 simple machines: the lever, inclined plane, wheel and axle, screw, wedge, and pulley. They were first defined by Renaissance scientists and make work easier by changing the direction or magnitude of forces. Simple machines allow an applied force to work against a load through mechanical advantage. They transform energy rather than create it, as discovered by Galileo. Each machine functions differently based on its design and placement of fulcrums.
Pin&joints 200607
A cotter joint connects two rods subjected to tensile or compressive stress along their axes. It uses a tapered, rectangular steel cotter that is inserted through slots in the ends of the rods at a high angle to their axes. The cotter pulls the rods tightly together and its tapered shape and narrow ends facilitate installation and removal. A gib and cotter joint is similar but used for rods with square or rectangular cross sections, with a gib added that is like a cotter but has heads on both ends. These joints are not suitable when the rods are subjected to rotation.
Work holding
This document discusses various methods for work holding on milling machines. It describes milling vises, soft jaws, parallels, and work stops as basic styles of work holding. It provides examples of different types of jaws, such as hardened jaws, standard jaws, step jaws, and jaws with built-in work stops. It also discusses uses of soft jaws, parallels, parallel keepers, and different styles of work stops, including vise mounted, table mounted, and clamp on styles. Finally, it mentions other work holding methods like 5-C collet holders, angle blocks, and V-blocks.
Unit1 161021055929
This document provides an introduction to machine elements and power transmission devices taught in the second semester of a mechanical engineering course. It discusses various machine elements like shafts, keys, couplings, bearings, clutches, and brakes. For power transmission devices, it covers belts, chains, and gear drives. The introduction describes machine elements as components that perform specific functions like holding parts together, transmitting power, or providing support. It then categorizes common elements and provides examples.
Riveted joints
Riveted joints use rivets to permanently fasten two materials together. A rivet has a hemispherical head on one side and a cylindrical shaft on the other. During installation, the tail of the rivet is deformed to expand its diameter and hold the rivet in place. Common riveted joint types include lap joints, where the ends of two materials overlap with coinciding holes, and butt joints, where two materials are joined edge to edge using an external cover plate riveted through parallel holes. Riveted joints can be single rivet joints with one rivet in a row, or double rivet joints with two rows of rivets.
Shaft couplings
.............................................................................................................................
Couplings
This document discusses different types of couplings used to connect shafts for power transmission. It describes rigid couplings like flanged, split, and keyed couplers used for aligned shafts. It also covers flexible couplings like universal joints, constant velocity joints, and flexible discs used to connect non-aligned shafts, allowing for some angular misalignment between the shafts during operation. A variety of coupling types exist to transmit power between shafts in different alignment configurations.
Powertransmissiondevices 190305101005
The document discusses various types of power transmission devices used to transfer motion and power between rotating shafts, including belt drives, chain drives, and gear drives. Belt drives can be flat, V-belt, timing or circular belts and are used to connect shafts over long distances. Chain drives use sprocket wheels connected by roller or silent chains. Gear drives include spur gears, helical gears, bevel gears, and worm gears to connect parallel, intersecting, or perpendicular shaft axes. Couplings like sleeve, split, flange, bush pin, and universal joints are also discussed for connecting shafts while allowing some misalignment or movement.
BASIC MECHANICAL ENGINEERING
This document provides an introduction to machine elements and power transmission devices taught in the second semester of a mechanical engineering course. It discusses various machine elements like shafts, keys, couplings, bearings, clutches, and brakes. It also covers power transmission devices such as belt drives, chain drives, and gear drives. The document describes the function, types, materials, and design of these common mechanical components.
Flat Spiral Springs used in Toys
Flat spiral springs are wound coils used in toys and various applications to store mechanical energy. The inner end is fixed while the outer end is clamped, allowing the spring to wind and unwind like a clock. As the arbor rotates during winding, energy is stored in the bent strip of high-quality steel or alloy. When unwound, this stored energy is released as torque on the drum. Key parameters like thickness, length, width, and distance from center are used to calculate stress, strain, deflection and energy storage in the flat spiral spring.
Lathe machine
Lathe is one of the most important machine tools in the metal working industry. A lathe operates on the principle of a rotating work-piece and a fixed cutting tool.
Lathe machine also called “Engine Lathe” because the first type of lathe was driven by a steam engine
Worm amd worm wheel
Worm gears allow rotational speed and torque to be controlled. They are commonly used for tuning stringed musical instruments, in elevator machinery, and differentials in vehicles. Worm gears provide mechanical advantage through gear reduction, allowing smaller rotational forces to overcome larger resistive loads.
Shaft & keys (machine design & industrial drafting )
This document discusses different types of shafts, keys, and their design considerations. It contains the following key points:
1. Shafts can be classified based on their shape (solid or hollow), application (transmitting, machine, spindle), and construction (rigid or flexible).
2. Keys are used to connect rotating machine elements to shafts and prevent relative motion. Common types include rectangular, square, parallel, gib-head, feather, and woodruff keys.
3. Shaft design considers factors like bending moment, shear stress, and material properties. Hollow shafts have higher strength-to-weight ratio than solid shafts of the same size.
Unit 6 mechanism and applications
Centrifugal pumps and compressors are power absorbing devices that use centrifugal force to increase the pressure of fluids and gases respectively. Centrifugal pumps have an impeller and casing that spin fluid at high velocities, converting kinetic energy to pressure energy. Centrifugal compressors accelerate gas velocities using an impeller and diffuser, converting the increased kinetic energy to pressure. Both are commonly used where high flow rates and moderate pressure increases are required. Belt and chain drives transmit power between parallel shafts using pulleys or sprockets connected by a belt or chain. They are used widely in industrial and domestic applications like conveyors, compressors, and bicycles.
Couplings
The document discusses different types of couplings used to connect shafts for power transmission. It describes rigid couplings like flanged, split, keyed, and friction couplings which are used for aligned shafts. It also describes flexible couplings like universal joints, constant velocity joints, and flexible couplings that allow for non-aligned shafts and compensate for changes in angular misalignment between the shafts.
Shaft couplings by Sheharyar khan (Uet Lahore)
This lesson is from the subject Machine design, and it is very important on the subject point of view that how shafts and couplings are important while designing a machine.
Lathe ppt
The document describes the lathe, which is a versatile machine tool used to shape materials by rotating the workpiece against various cutting tools. It discusses the main components of a lathe like the bed, headstock, tailstock, carriage, and feed mechanism. It also explains common operations performed on a lathe like turning, drilling, boring, knurling, and tapering.
008 threading
The document discusses various threading tools and procedures. It covers different types of taps such as taper, plug, and bottoming taps. It also discusses tap drill sizes, threading dies, and machine screws. Common thread standards covered include American National and Metric systems. Proper techniques are outlined for tapping holes and using dies.
What's hot (19)
Shaft & keys (machine design & industrial drafting )
Shaft & keys (machine design & industrial drafting )
Viewers also liked
My future prediction jairo
The author plans to move with their family to Rio de Janeiro, buy a house they like in Ibagué, change their truck in two months, continue their professional studies, play in a golf tournament, and take a vacation in the Caribbean.
Vivek Kant Mohit.
Vivek Kant Mohit is seeking an associate position in a progressive BFSI organization. He has 2 years of experience in manual software testing with expertise in STLC, SDLC lifecycles, test case development, and defect tracking. His skills include Agile methodology, SQL, root cause analysis, and he has experience testing various banking applications such as loans, internet banking, credit cards, and more. He holds an ISTQB certification and has a Bachelor's degree in Electronics and Communication Engineering.
Lathe parts
This document describes the main components of a lathe machine. It lists the bed, ways, spindle, tailstock, carriage, tool post, compound rest, apron, feed rod, and lead screw. The spindle holds the workpiece, while the carriage and tailstock precisely position cutting tools. The compound rest and apron control cross slide and tool movement.
Os Cursos de Bacharelado e Licenciatura do IF/UFF
Apresentaremos os Cursos de Bacharelado e Licenciatura em Física da UFF. Ressaltaremos algumas regras importantes dos Cursos de Graduação da Universidade assim como outras específicas dos nossos cursos. Também falaremos sobre programas componentes dos cursos: Iniciação Científica, Iniciação à Docência, Tutoria, Altos Estudos, Extensão e outros.
Parts of the lathe machine yanquen , jairo
The document discusses several key parts of a lathe machine:
1) The Norton box allows for changing thread pitches without needing to change the entire gear train. Larger lathes have more steps and systems than smaller lathes.
2) The spindle uses a screw and nut mechanism to convert circular motion into linear motion to move the workpiece longitudinally. It is characterized by the number of threads and the thread pitch.
3) The dish holds the workpiece during machining and comes in different styles for different shaped workpieces.
4) The toolpost clamps the cutting tools and different tools are chosen based on the machine and operation.
5) The bench provides support and guidance for other major parts
Viewers also liked (10)
Similar to Tha lathe machine
LatheMachine_2019-20.pptx
The document provides information about the working principle and components of a lathe machine. It describes that the lathe holds the workpiece firmly and rotates it while a cutting tool is fed into the revolving workpiece to remove material. The main components include the bed, headstock, tailstock, carriage, and feed mechanism. It also discusses various lathe operations like turning, facing, grooving and threading. Taper turning can be done using methods like the form tool method or compound rest method.
Mechanical Technology Grade 12 Chapter 6 Terminology Of Machines
This slide show accompanies the learner guide "Mechanical Technology Grade 10" by Charles Goodwin, Andre Lategan & Daniel Meyer, published by Future Managers Pty Ltd. For more information visit our website www.futuremanagers.net
Machine tool section a
i hope, it will helpful to the students and peoples in the search of topics mentioned
it is informative to study to even get passing marks or for revision
lathe-151001051314-lva1-app6892_Copy.pdf
A lathe is a machine that removes metal from a workpiece to shape it. It holds the workpiece firmly and rotates it at high speed while a cutting tool is fed into it. The main components of a lathe are the bed, headstock, tailstock, carriage, and feed mechanisms. There are several types of lathes classified based on their drive mechanism and purpose, including speed lathes, engine lathes, bench lathes, toolroom lathes, capstan and turret lathes, and automatic lathes. Lathes perform operations like turning, facing, drilling, boring, threading, and knurling using tools held in the tool post or turret. Workpieces are secured using chucks,
lathe-151001051314-lva1-app6892 (1).pdf
The document discusses different types of lathe machines and their operations. It describes 7 types of lathes - speed lathe, engine lathe, bench lathe, tool room lathe, capstan and turret lathe, automatic lathe, and special purpose lathes. It also explains lathe operations like turning, facing, boring, drilling, threading and knurling. Additionally, it covers lathe accessories such as centers, chucks, faceplates, mandrels and rests that are used for holding and supporting workpieces.
Lathe Machine
The document discusses different types of lathe machines and their operations. It describes 7 types of lathes - speed lathe, engine lathe, bench lathe, tool room lathe, capstan and turret lathe, automatic lathe, and special purpose lathes. It also explains lathe operations like turning, facing, boring, drilling, threading and knurling. Additionally, it covers lathe accessories such as centers, chucks, faceplates, mandrels and rests that are used for holding and supporting workpieces.
Engine lathe ,types of lathes
The document describes different types of lathes and their parts and operations. It discusses the basic parts and functions of a lathe such as the bed, headstock, carriage, tailstock, toolpost. It also covers lathe accessories like centers, chucks, dogs. Different lathe operations are outlined including turning, facing, drilling. The types of lathes covered include bench lathes, engine lathes, toolroom lathes, capstan and turret lathes, automatic lathes, and special purpose lathes. The key differences between turret and capstan lathes are also summarized.
Lathe machine tool
Here are the steps to solve this problem:
a) Cutting speed (V)
- Maximum cutting speed (at outer diameter D0):
Vmax = πD0N
= π × 12 × 400
= 15072 mm/min
- Minimum cutting speed (at inner diameter Df):
Vmin = πDfN
= π × 11 × 400
= 13816 mm/min
b) Depth of cut (d) and cutting time (t)
- Depth of cut (d) = (D0 - Df)/2 = (12 - 11)/2 = 0.5 mm
- Feed rate (f) = Axial speed (
interoduction to Lathe machine
The document provides an introduction and overview of the main parts and operations of a lathe machine. It describes that a lathe machine is a tool used to cut and shape cylindrical materials through operations like turning, facing, drilling, and threading. It then explains the key components of a lathe which include the bed, headstock, tailstock, carriage, and legs. The document also lists common operations performed on a lathe like facing, turning, shouldering, tapering, knurling, drilling, and boring.
LATHE: LATHE PARTS AND SPECIFICATIONS OF LATHE MACHINE BY POLAYYA CHINTADA
LATHE: LATHE PARTS AND SPECIFICATIONS OF LATHE MACHINE BY POLAYYA CHINTADA ,USED FOR ENGINEERING STUDENTS
Principle Parts of a Lathe
The document discusses the principle parts of a lathe machine. It identifies the main parts as the bed, headstock, tailstock, carriage, and feed mechanisms. The bed provides the foundation and guide ways. The headstock houses the spindle and provides power. The tailstock secures the workpiece. The carriage controls the tool and moves it longitudinally. The feed mechanisms control the movement of the tool relative to the workpiece during cutting operations.
Lathemachine
The document discusses lathe machines and their operation. It defines a lathe as a machine that removes metal from a workpiece to shape it. The main parts of a lathe are identified as the bed, headstock, tailstock, and carriage. Lathes operate by rotating the workpiece and moving a fixed cutting tool into it. Common lathe operations include turning, facing, drilling, grooving and parting.
Lathe, Shaping, Slotting, Planning machines
A mandrel is a device used to hold and rotate hollow workpieces during machining operations. It is made of high carbon steel and has slightly smaller diameter ends to provide effective gripping surfaces. Different types of mandrels are used according to specific requirements. Centres are devices used in the tailstock to support workpieces. There are several types including ordinary, insert, half, pipe, ball, tipped, and revolving centres suited for different workpiece geometries and machining needs. Thread cutting on lathes involves generating helical grooves on cylindrical or conical surfaces using threading tools with the correct included angle for the thread type. It is done by synchronizing the longitudinal feed rate of the tool with the rotational speed of
WORKSHOP TECHNOLOGY-Lathe and operation.
1. A lathe is a machine tool that removes metal from a workpiece to create a desired shape and size by rotating the workpiece against various cutting tools. It operates on the principle of a rotating workpiece and a fixed cutting tool.
2. The main parts of a lathe include the bed, headstock, tailstock, and carriage. The bed provides the foundation, the headstock holds and rotates the workpiece, the tailstock supports the other end of the workpiece, and the carriage supports the cutting tool.
3. Common lathe operations include turning, facing, tapering, contouring, threading, boring, drilling, chamfering, cutoff,
Turning Machines
Henry Maudslay is considered the father of machine tool technology for his inventions around 1800, including a metal lathe that enabled mass production with interchangeable parts. A lathe is used to machine cylindrical workpieces and consists of main parts like the bed, headstock, tailstock, carriage, and tool post. Different lathe types include engine lathes, turret lathes, and automatic lathes. The document discusses lathe parts and mechanisms in detail.
Lathe machine
The document provides information on the history and evolution of lathe machines. It describes early lathe models that were powered manually like the strap lathe, bow lathe, and pole lathe. It then discusses more advanced lathes that used mechanical power sources like the treadle lathe and lathes powered by a great wheel. The document also outlines the main components of a lathe like the headstock, spindle, tailstock, carriage, and tooling. It provides details on workholding devices, lathe operations, and different types of lathes used for various applications.
Lathe
The document discusses the lathe machine tool. It describes the main parts of a lathe including the bed, headstock, spindle, tailstock, carriage and tooling. It explains the different types of lathes such as engine lathes, bench lathes, and special purpose lathes. It also outlines various operations that can be performed on a lathe like turning, facing, threading and drilling.
Lathe Machine.pdf
The document discusses the lathe machine. It begins by defining a lathe as a machine that removes metal from a workpiece to shape it. It then discusses the main parts of a lathe such as the bed, headstock, tailstock, and carriage. It explains the working principle of a lathe, which involves rotating the workpiece while moving a fixed cutting tool into it. Finally, it discusses various lathe operations like turning, facing, drilling and threading that are used to machine different features on a workpiece.
Lathe Machine.pdf
The document discusses the lathe machine. It begins by defining a lathe as a machine that removes metal from a workpiece to shape it. It then discusses the main parts of a lathe such as the bed, headstock, tailstock, and carriage. It explains the working principle of a lathe, which involves rotating the workpiece while moving a fixed cutting tool to remove material. The document also covers various lathe operations like turning, facing, drilling and threading. It describes lathe accessories, specifications, types of lathes and operating conditions.
Lathe accessories
This is a presentation on different types of lathe machine accessories which is a part of Manufacturing process I.
Similar to Tha lathe machine (20)
Mechanical Technology Grade 12 Chapter 6 Terminology Of Machines
Mechanical Technology Grade 12 Chapter 6 Terminology Of Machines
LATHE: LATHE PARTS AND SPECIFICATIONS OF LATHE MACHINE BY POLAYYA CHINTADA
LATHE: LATHE PARTS AND SPECIFICATIONS OF LATHE MACHINE BY POLAYYA CHINTADA
Recently uploaded
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...Nguyen Thanh Tu Collection
https://app.box.com/s/qspvswamcohjtbvbbhjad04lg65waylfEducational Technology in the Health Sciences
Plenary presentation at the NTTC Inter-university Workshop, 18 June 2024, Manila Prince Hotel.
Creative Restart 2024: Mike Martin - Finding a way around “no”
Ideas that are good for business and good for the world that we live in, are what I’m passionate about.
Some ideas take a year to make, some take 8 years. I want to share two projects that best illustrate this and why it is never good to stop at “no”.
Contiguity Of Various Message Forms - Rupam Chandra.pptx
Contiguity Of Various Message Forms - Rupam Chandra.pptx
Diversity Quiz Prelims by Quiz Club, IIT Kanpur
Prelims of Diversity Quiz, conducted by Quiz Club, IIT Kanpur in collaboration with Unmukt on 22 June 2024.
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
The recent surge in pro-Palestine student activism has prompted significant responses from universities, ranging from negotiations and divestment commitments to increased transparency about investments in companies supporting the war on Gaza. This activism has led to the cessation of student encampments but also highlighted the substantial sacrifices made by students, including academic disruptions and personal risks. The primary drivers of these protests are poor university administration, lack of transparency, and inadequate communication between officials and students. This study examines the profound emotional, psychological, and professional impacts on students engaged in pro-Palestine protests, focusing on Generation Z's (Gen-Z) activism dynamics. This paper explores the significant sacrifices made by these students and even the professors supporting the pro-Palestine movement, with a focus on recent global movements. Through an in-depth analysis of printed and electronic media, the study examines the impacts of these sacrifices on the academic and personal lives of those involved. The paper highlights examples from various universities, demonstrating student activism's long-term and short-term effects, including disciplinary actions, social backlash, and career implications. The researchers also explore the broader implications of student sacrifices. The findings reveal that these sacrifices are driven by a profound commitment to justice and human rights, and are influenced by the increasing availability of information, peer interactions, and personal convictions. The study also discusses the broader implications of this activism, comparing it to historical precedents and assessing its potential to influence policy and public opinion. The emotional and psychological toll on student activists is significant, but their sense of purpose and community support mitigates some of these challenges. However, the researchers call for acknowledging the broader Impact of these sacrifices on the future global movement of FreePalestine.
skeleton System.pdf (skeleton system wow)
🔥🔥🔥🔥🔥🔥🔥🔥🔥
إضغ بين إيديكم من أقوى الملازم التي صممتها
ملزمة تشريح الجهاز الهيكلي (نظري 3)
💀💀💀💀💀💀💀💀💀💀
تتميز هذهِ الملزمة بعِدة مُميزات :
1- مُترجمة ترجمة تُناسب جميع المستويات
2- تحتوي على 78 رسم توضيحي لكل كلمة موجودة بالملزمة (لكل كلمة !!!!)
#فهم_ماكو_درخ
3- دقة الكتابة والصور عالية جداً جداً جداً
4- هُنالك بعض المعلومات تم توضيحها بشكل تفصيلي جداً (تُعتبر لدى الطالب أو الطالبة بإنها معلومات مُبهمة ومع ذلك تم توضيح هذهِ المعلومات المُبهمة بشكل تفصيلي جداً
5- الملزمة تشرح نفسها ب نفسها بس تكلك تعال اقراني
6- تحتوي الملزمة في اول سلايد على خارطة تتضمن جميع تفرُعات معلومات الجهاز الهيكلي المذكورة في هذهِ الملزمة
واخيراً هذهِ الملزمة حلالٌ عليكم وإتمنى منكم إن تدعولي بالخير والصحة والعافية فقط
كل التوفيق زملائي وزميلاتي ، زميلكم محمد الذهبي 💊💊
🔥🔥🔥🔥🔥🔥🔥🔥🔥
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
220711130100 udita Chakraborty Aims and objectives of national policy on inf...
Aims and objectives of national policy on information and communication technology(ICT) in school education in india
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...Nguyen Thanh Tu Collection
https://app.box.com/s/nrwz52lilmrw6m5kqeqn83q6vbdp8yzpElevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Whether you're new to SEO or looking to refine your existing strategies, this webinar will provide you with actionable insights and practical tips to elevate your nonprofit's online presence.
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
Internet resources for social science
Recently uploaded (20)
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.ppt
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
CHUYÊN ĐỀ ÔN TẬP VÀ PHÁT TRIỂN CÂU HỎI TRONG ĐỀ MINH HỌA THI TỐT NGHIỆP THPT ...
Creative Restart 2024: Mike Martin - Finding a way around “no”
Creative Restart 2024: Mike Martin - Finding a way around “no”
Contiguity Of Various Message Forms - Rupam Chandra.pptx
Contiguity Of Various Message Forms - Rupam Chandra.pptx
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
THE SACRIFICE HOW PRO-PALESTINE PROTESTS STUDENTS ARE SACRIFICING TO CHANGE T...
220711130100 udita Chakraborty Aims and objectives of national policy on inf...
220711130100 udita Chakraborty Aims and objectives of national policy on inf...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 8 - CẢ NĂM - FRIENDS PLUS - NĂM HỌC 2023-2024 (B...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
Elevate Your Nonprofit's Online Presence_ A Guide to Effective SEO Strategies...
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
220711130083 SUBHASHREE RAKSHIT Internet resources for social science
Tha lathe machine
- 2. Members:
- 4. Bed Usually made of cast iron. Provides a heavy rigid frame on which all the main components are mounted.
- 5. Ways Inner and outer guide rails that are precision machined parallel to assure accuracy of movement.
- 6. Mounted in a fixed position on the inner ways, usually at the left end. Using a chuck, it rotates the work. Headstock
- 7. Spindle Hole through the headstock to which bar stock can be fed, which allows shafts that are up to 2 times the length between lathe centers to be worked on one end at a time
- 8. Tailstock, Tailstock Quill Fits on the inner ways of the bed and can slide towards any position the headstock to fit the length of the work piece. An optional taper turning attachment would be mounted to it. Has a Morse taper to hold a lathe center, drill bit or other tool.
- 9. Carriage Moves on the outer ways. Used for mounting and moving most the cutting tools
- 10. • Split Nut: For cutting threads
- 12. Compound Rest:
- 13. Apron:
- 16. • Split Nut: