Power system practice and design
•
0 likes•235 views
This document outlines the course contents for the subject Power System Practice and Design, which is part of the 8th semester B.E. in Electrical Engineering at Gujarat Technological University. The course covers various topics related to designing power systems including transmission line design, AC and DC low tension distribution design, substation design, power system earthing, power station design, insulation coordination, and HVDC transmission. Students are also suggested to visit LT/HT electrification and 220KV/400KV substations to complement the theoretical concepts covered in class. Recommended textbooks for the course are also listed.
Report
Share
Report
Share
Download to read offline
Recommended
Mag Lev Demonstration
Magnetic levitation (MagLev) transportation systems use magnetic forces to lift, propel, and guide trains along guideways at high speeds with little friction. MagLev trains can reach speeds over 350 mph and offer benefits like reduced highway congestion, increased rail capacity, and lower energy usage compared to conventional rail. However, initial costs are high and issues like noise, passenger comfort, and cooling superconducting magnets need further research and development. Students will build scale MagLev models using electric motors and propellers that must fully levitate and be evaluated on speed and design documentation.
Anti-Collision Device
The document discusses safety features for tower cranes, including zoning functions to prevent over-sailing of critical areas like power lines, and anti-collision systems allowing cranes to automatically track each other at a safe speed and distance. While these systems minimize safety risks on congested job sites, they are also very expensive to implement due to complex electrical requirements and approvals needed.
Imagine_Power
This document discusses reactive power, also known as imaginary power, which is caused by inductive loads on the electrical grid. Reactive power is the result of a phase shift between the voltage and current sine waves in alternating current circuits with inductors and capacitors. It does no useful work but causes higher transmission losses and costs. As transmission line lengths increase, their inductive reactance grows, requiring more reactive power support from generators through increased field excitation. Capacitor banks can be added to decrease the overall reactance seen by generators, allowing them to operate more efficiently while supplying the same real power load.
Transformer
The document discusses the working principle, design, applications, advantages, and limitations of a momentum transformer. It introduces momentum transformers and how they transfer electrical energy from one circuit to another using electromagnetism and electromagnetic induction. Some applications mentioned include auto-starters for motors, balance coils in AC distribution systems, and as regulating or booster transformers. Advantages include continuously varying voltage, while disadvantages include cost, space required, and weight. Cautions discussed include using high quality magnetic core materials and not connecting the transformer to a direct source or leaving the secondary open-circuited.
Swartley b santinia_maled_jaccinob-destructive-arcong-of-insulated-joints-in-...
The document summarizes a study conducted by Metro-North Railroad and Long Island Rail Road to analyze destructive arcing occurring at insulated joints where electric trains change tracks. The study found that inductive elements in the railroads' traction power and train propulsion systems contribute to high voltages forming across insulated joints when train wheels break contact. Field testing was performed under various conditions to measure currents and voltages during arcing. The results suggest methods to mitigate arcing by reducing inductive effects in the traction return circuit and train circuits.
Features and applications of power soft magnetic ferrite cores
The ferrite core is made up of iron oxide (Fe2O3) plus one or more additional metal oxides or carbonate compounds (such as manganese, zinc, nickel,
and magnesium). Ferrite raw materials are compressed, then sintered at high temperatures, and machined to generate a completed magnetic core that
matches the application's requirements.
Supercapacitor
This document discusses supercapacitors, also known as electric double layer capacitors or ultracapacitors. It describes their construction as consisting of two metal foils coated with activated carbon electrodes separated by an ion-permeable membrane. When voltage is applied, an electric double layer forms with opposite charges on either side of the separator. Supercapacitors store energy electrostatically in this double layer and have a much higher energy density than common capacitors. They can charge and discharge rapidly and are used in applications requiring high power or energy storage like vehicle startups, backup power systems, and cameras.
SUPER CAPACITOR
A supercapacitor or ultra capacitor is an electrochemical capacitor that has an unusually high energy density when compared to common capacitors. They are of particular interest in automotive applications for hybrid vehicles and as supplementary storage for battery electric vehicles.
Recommended
Mag Lev Demonstration
Magnetic levitation (MagLev) transportation systems use magnetic forces to lift, propel, and guide trains along guideways at high speeds with little friction. MagLev trains can reach speeds over 350 mph and offer benefits like reduced highway congestion, increased rail capacity, and lower energy usage compared to conventional rail. However, initial costs are high and issues like noise, passenger comfort, and cooling superconducting magnets need further research and development. Students will build scale MagLev models using electric motors and propellers that must fully levitate and be evaluated on speed and design documentation.
Anti-Collision Device
The document discusses safety features for tower cranes, including zoning functions to prevent over-sailing of critical areas like power lines, and anti-collision systems allowing cranes to automatically track each other at a safe speed and distance. While these systems minimize safety risks on congested job sites, they are also very expensive to implement due to complex electrical requirements and approvals needed.
Imagine_Power
This document discusses reactive power, also known as imaginary power, which is caused by inductive loads on the electrical grid. Reactive power is the result of a phase shift between the voltage and current sine waves in alternating current circuits with inductors and capacitors. It does no useful work but causes higher transmission losses and costs. As transmission line lengths increase, their inductive reactance grows, requiring more reactive power support from generators through increased field excitation. Capacitor banks can be added to decrease the overall reactance seen by generators, allowing them to operate more efficiently while supplying the same real power load.
Transformer
The document discusses the working principle, design, applications, advantages, and limitations of a momentum transformer. It introduces momentum transformers and how they transfer electrical energy from one circuit to another using electromagnetism and electromagnetic induction. Some applications mentioned include auto-starters for motors, balance coils in AC distribution systems, and as regulating or booster transformers. Advantages include continuously varying voltage, while disadvantages include cost, space required, and weight. Cautions discussed include using high quality magnetic core materials and not connecting the transformer to a direct source or leaving the secondary open-circuited.
Swartley b santinia_maled_jaccinob-destructive-arcong-of-insulated-joints-in-...
The document summarizes a study conducted by Metro-North Railroad and Long Island Rail Road to analyze destructive arcing occurring at insulated joints where electric trains change tracks. The study found that inductive elements in the railroads' traction power and train propulsion systems contribute to high voltages forming across insulated joints when train wheels break contact. Field testing was performed under various conditions to measure currents and voltages during arcing. The results suggest methods to mitigate arcing by reducing inductive effects in the traction return circuit and train circuits.
Features and applications of power soft magnetic ferrite cores
The ferrite core is made up of iron oxide (Fe2O3) plus one or more additional metal oxides or carbonate compounds (such as manganese, zinc, nickel,
and magnesium). Ferrite raw materials are compressed, then sintered at high temperatures, and machined to generate a completed magnetic core that
matches the application's requirements.
Supercapacitor
This document discusses supercapacitors, also known as electric double layer capacitors or ultracapacitors. It describes their construction as consisting of two metal foils coated with activated carbon electrodes separated by an ion-permeable membrane. When voltage is applied, an electric double layer forms with opposite charges on either side of the separator. Supercapacitors store energy electrostatically in this double layer and have a much higher energy density than common capacitors. They can charge and discharge rapidly and are used in applications requiring high power or energy storage like vehicle startups, backup power systems, and cameras.
SUPER CAPACITOR
A supercapacitor or ultra capacitor is an electrochemical capacitor that has an unusually high energy density when compared to common capacitors. They are of particular interest in automotive applications for hybrid vehicles and as supplementary storage for battery electric vehicles.
ultracapacitor
The document discusses ultracapacitors, also known as supercapacitors. It explains that ultracapacitors store energy electrostatically through a double-layer capacitance effect at the electrode-electrolyte interface, without chemical reactions. They have a high surface area porous carbon electrode, electrolyte, and separator. When voltage is applied, ions are absorbed from the electrolyte onto each electrode surface. Ultracapacitors provide higher power density and longer lifespan than batteries, but lower energy density. Their applications include electronics, electric vehicles, and backup power systems.
SERIES AND PARALLEL CIRCUIT
This lesson covers series and parallel circuits. In a series circuit, the current has only one path and the current is the same through each resistor. A parallel circuit has two or more paths for current and the voltage is the same across each component. The lesson objectives are to identify and explain series and parallel circuits, apply Ohm's law in series circuits, and compare series and parallel circuits. Students will also learn to use parallel circuits as current dividers.
Introduction to supercapacitors
This document discusses supercapacitors, also known as electric double layer capacitors or ultracapacitors. It defines supercapacitors as electrochemical capacitors that can store much higher energy than common capacitors. The document outlines the basic design of supercapacitors, including their electrodes, electrolyte, and separator. It describes the three main types - electrochemical double layer capacitors, pseudocapacitors, and hybrid capacitors - and their charge storage mechanisms. Applications, advantages over batteries, and disadvantages of supercapacitors are also summarized.
My technical topic seminar
This document provides an overview of supercapacitors. It begins with definitions of capacitors and describes supercapacitors as capacitors that can store 10-100 times more energy per unit than traditional capacitors. The document outlines the history of supercapacitor development, how supercapacitors differ from batteries in their faster charging times and longer lifespans, and their working principle of storing charge in an electric double-layer at the electrode interfaces. It also lists advantages like high power density and operating temperatures, and disadvantages such as low energy density. Finally, it discusses applications of supercapacitors in hybrid vehicles, backup power systems, and cold weather starts for equipment.
Electric Current
- A rheostat is an adjustable resistor that can control current, resistance, potential difference, light intensity, and motor speed in electric circuits. Its resistive element can be metal, carbon, or liquid.
- Resistors in series have a total resistance equal to the sum of individual resistances. Resistors in parallel have a total resistance lower than any individual resistance.
- The resistivity of a conductor is its resistance per unit length and area. Conductivity is the reciprocal of resistivity and measured in Siemens per meter. Resistance varies directly with temperature for most materials.
Multi range Load cell
The document presents a review of multi-stage strain gauge based load cells. It discusses the different types of load cells including bending, shear beam, compression-tension, and ring torsion load cells. Design considerations for load cells include the loading direction, size and capacity, and sources of non-linearity. New methods for designing load cells include multi-range cells that can distinguish between light and heavy loads, non-linear cells with varying stiffness, and multi-capacity cells. Optimization techniques discussed are shape optimization using finite element analysis and multi-objective optimization using Taguchi methods and grey relational analysis.
Ee 2355 dem (1)
This document contains the syllabus for the course MBEC EE 2355 Design of Electrical Machines. It includes 5 units covering various topics:
Unit 1 introduces major considerations in electrical machine design such as materials, loadings, thermal aspects and ratings.
Unit 2 covers DC machine design including output equations, dimensions, magnetic circuit calculations and performance prediction.
Unit 3 discusses transformer design including output equations, dimensions, cooling methods and operating characteristics.
Unit 4 focuses on induction motor design including output equations, dimensions, leakage calculations and operating characteristics.
Unit 5 examines synchronous machine design such as output equations, design of salient pole and turbo alternator machines.
The syllabus also lists the textbook and references
Super Capacitors Energy Storage System Applied in the Micro Grid
A super capacitor has been employed in the micro grid in order to store when energy is ample and discharges to the grid under faulty conditions
transmission-lines
This document discusses transmission line theory and analysis. It begins by explaining how power is delivered through wires at low frequencies versus through electric and magnetic fields at microwave frequencies, defining transmission lines. It then lists common types of transmission lines including two-wire, coaxial cable, waveguide, and planar lines. It analyzes the differences between analyzing circuits at low versus high frequencies. Finally, it provides details on metallic cable transmission media, including balanced vs unbalanced lines, equivalent circuits, wave propagation, losses, phasors, and characteristic impedance.
UltraCapacitor
This document provides an overview of ultracapacitors, also known as supercapacitors or double-layer capacitors. It defines ultracapacitors as energy storage devices that store energy electrostatically without chemical reactions. The document describes the construction of ultracapacitors including porous electrodes, an electrolyte, separator, and current collectors. It also explains the formation of an electric double layer and types of ultracapacitors such as double-layer, pseudocapacitors, and hybrid capacitors. Applications mentioned include electronics, electric vehicles, and backup power systems.
Jan29 ppt1
This document discusses direct current (DC) motors. It defines a DC motor as a device that converts DC electrical energy into mechanical energy. It explains how DC motors operate based on Faraday's Law of electromagnetic induction and Fleming's left hand rule. Common applications of DC motors include in hazardous areas, industrial equipment, remote controls, and HVAC. New trends are brushless DC motors which overcome disadvantages of traditional DC motors and integrate the motor and drive electronics.
Schematic powerpoint
A schematic is a diagram that represents an electrical or mechanical system. It shows how a circuit functions and is used as a roadmap. Common symbols in schematics represent components like resistors, capacitors, diodes, transistors, batteries, switches, and logic gates. Understanding what each symbol means allows the schematic to show how current flows through the entire circuit.
EE6352
This document outlines the syllabus for the course EE6352 - Electrical Engineering and Instrumentation. The course is divided into 5 units that cover topics such as DC machines, transformers, induction and synchronous machines, basics of measurements and instrumentation, and analog and digital instruments. It also lists some recommended reference books for the course. The course aims to teach students about the principles and applications of electrical machines, transformers, and instrumentation through theory, problems, and examples.
connecting resistors
In a series circuit, current can only flow through one path and the voltage is divided across each resistor. The total resistance of multiple resistors in series is equal to the sum of each individual resistance. In a parallel circuit, current can flow through multiple paths and the voltage is the same across each resistor, while the current varies. Parallel circuits have advantages over series circuits in that each device sees the full voltage and devices can be independently turned off without stopping current to others.
Supercapacitors in Transportation Applications
The transportation industry continues to adopt more supercapacitors into their designs each year. Advantages in power density, cold temperature performance, and lifetime make them suitable for accompanying or replacing a battery bank.
This presentation introduces what a supercapacitor is (it isn't just a big capacitor!), some characteristics to consider, and two applications of ELDCs.
This paper was presented by KEMET at the 2015 Applied Power Electronic Conference in Charlotte, NC.
Highly reliable transformerless photovoltaic inverters with leakage current a...
Highly Reliable Transformerless Photovoltaic Inverters With Leakage Current and Pulsating Power Elimination
This paper presents a transformerless inverter topology, which is capable of simultaneously solving leakage current and pulsating power issues in grid-connected photovoltaic (PV) systems. Without adding any additional components to the system, the leakage current caused by the PV-to-ground parasitic capacitance can be bypassed by introducing a common-mode (CM) conducting path to the inverter. The resulting ground leakage current is therefore well controlled to be below the regulation limit. Furthermore, the proposed inverter can also eliminate the well-known double-line-frequency pulsating power that is inherent in single-phase PV systems. By properly injecting CM voltages to the output filter capacitors, the pulsating power can be decoupled from the dc-link. Therefore, it is possible to use long-lifetime film capacitors instead of electrolytic capacitors to improve the reliability of the PV system. The mechanism of leakage current suppression and the closed-loop control of pulsating power decoupling are discussed in this paper in detail. A 500-W prototype was also built and tested in the laboratory, and both simulation and experimental results are finally presented to show the excellent performance of the proposed PV inverter.
Web : http://www.lemenizinfotech.com
Web : http://ieeemaster.com
Web : http://www.lemenizinfotech.com/power-system-ieee-projects-2016-2017/
Web : http://ieeemaster.com/power-system-ieee-projects-2016-2017/
Address: 36, 100 Feet Road(Near Indira Gandhi Statue), Natesan Nagar, Pondicherry-605 005
Contact numbers: +91 95663 55386, 99625 88976 (0413) 420 5444
Mail : projects@lemenizinfotech.com
Mobile : 9566355386 / 9962588976
Deip soni_Direct current
Direct current (DC) is an unidirectional electric current that flows in a constant direction, distinguishing it from alternating current (AC). DC is produced by sources like batteries and solar cells. It can flow through conductors like wires as well as semiconductors and vacuums. While early electric power transmission used DC, AC distribution is now dominant due to advantages in transforming and transmitting power over long distances. However, DC is still used for applications requiring direct current flow, like battery charging and most electronic systems.
Supercapacitor module applications for customers
Supercapacitor modules provide high energy storage capacity at higher voltages than individual supercapacitors. They are being used in a growing number of industrial, transportation, and green energy applications where short bursts of energy or power smoothing is needed. Custom supercapacitor modules can be designed to meet specific customer needs and specifications.
Silicon Solar Brochure - TruPower Portable Solar Power Systems
The TruPower portable solar power systems come in 150W and 350W models and are designed to be compact, durable, and easy to use portable power sources for outdoor activities. They use solar panels, inverters, batteries, and charging circuits to efficiently charge electronic devices like phones, cameras, tablets, and laptops from solar power or wall outlets. The systems can provide multiple charges to smartphones, fewer charges to tablets, and a charge or two for laptops per charge depending on the wattage of the model.
ULTRA CAPACITORS
This document discusses ultracapacitors and their advantages over batteries. It begins with an introduction to energy storage and batteries. It then explains that ultracapacitors can charge and discharge much faster than batteries. The document outlines the working of ultracapacitors, which store electricity through physically separating positive and negative charges using a double-layer capacitance or pseudo capacitance. It lists applications like energy harvesting, railways, and the military. Advantages include fast charging, long lifespan, and high capacitance. Disadvantages are lower energy storage and faster discharge than batteries. The conclusion is that further research may lead ultracapacitors to replace batteries in the future.
4th sem new
This document provides details of the modified course curriculum for the 4th semester BTech program in Electrical Engineering. It includes 10 courses with a total credit of 28. Some of the key courses include Electrical Machines-I, Power Systems I, Digital Electronics, Circuit Theory, and Microprocessors & Microcontrollers. For each course, the document provides information on course code, credit hours, prerequisites, topics to be covered, reference books, and course outcomes. It also provides the course structure for the Electrical Machines-I course including detailed topics in each part.
POWER SYSTEM PLANNING AND DESIGN. DESIGN OF EHV TRANSMISSION LINES & BUNDLED ...
This document discusses the design of extra high voltage transmission lines and bundled conductors in EHV lines. It outlines the advantages of EHV lines such as reduced transmission losses and material requirements. However, it also notes disadvantages like increased corona losses and insulation needs. Key design considerations for EHV lines include the choice of operating voltage, grounding method, conductor selection, and insulator selection. For lines above 400kV, bundled conductors are used and the document discusses formulas for calculating the inductance, capacitance, surge impedance, and surge impedance loading to determine bundling requirements.
More Related Content
What's hot
ultracapacitor
The document discusses ultracapacitors, also known as supercapacitors. It explains that ultracapacitors store energy electrostatically through a double-layer capacitance effect at the electrode-electrolyte interface, without chemical reactions. They have a high surface area porous carbon electrode, electrolyte, and separator. When voltage is applied, ions are absorbed from the electrolyte onto each electrode surface. Ultracapacitors provide higher power density and longer lifespan than batteries, but lower energy density. Their applications include electronics, electric vehicles, and backup power systems.
SERIES AND PARALLEL CIRCUIT
This lesson covers series and parallel circuits. In a series circuit, the current has only one path and the current is the same through each resistor. A parallel circuit has two or more paths for current and the voltage is the same across each component. The lesson objectives are to identify and explain series and parallel circuits, apply Ohm's law in series circuits, and compare series and parallel circuits. Students will also learn to use parallel circuits as current dividers.
Introduction to supercapacitors
This document discusses supercapacitors, also known as electric double layer capacitors or ultracapacitors. It defines supercapacitors as electrochemical capacitors that can store much higher energy than common capacitors. The document outlines the basic design of supercapacitors, including their electrodes, electrolyte, and separator. It describes the three main types - electrochemical double layer capacitors, pseudocapacitors, and hybrid capacitors - and their charge storage mechanisms. Applications, advantages over batteries, and disadvantages of supercapacitors are also summarized.
My technical topic seminar
This document provides an overview of supercapacitors. It begins with definitions of capacitors and describes supercapacitors as capacitors that can store 10-100 times more energy per unit than traditional capacitors. The document outlines the history of supercapacitor development, how supercapacitors differ from batteries in their faster charging times and longer lifespans, and their working principle of storing charge in an electric double-layer at the electrode interfaces. It also lists advantages like high power density and operating temperatures, and disadvantages such as low energy density. Finally, it discusses applications of supercapacitors in hybrid vehicles, backup power systems, and cold weather starts for equipment.
Electric Current
- A rheostat is an adjustable resistor that can control current, resistance, potential difference, light intensity, and motor speed in electric circuits. Its resistive element can be metal, carbon, or liquid.
- Resistors in series have a total resistance equal to the sum of individual resistances. Resistors in parallel have a total resistance lower than any individual resistance.
- The resistivity of a conductor is its resistance per unit length and area. Conductivity is the reciprocal of resistivity and measured in Siemens per meter. Resistance varies directly with temperature for most materials.
Multi range Load cell
The document presents a review of multi-stage strain gauge based load cells. It discusses the different types of load cells including bending, shear beam, compression-tension, and ring torsion load cells. Design considerations for load cells include the loading direction, size and capacity, and sources of non-linearity. New methods for designing load cells include multi-range cells that can distinguish between light and heavy loads, non-linear cells with varying stiffness, and multi-capacity cells. Optimization techniques discussed are shape optimization using finite element analysis and multi-objective optimization using Taguchi methods and grey relational analysis.
Ee 2355 dem (1)
This document contains the syllabus for the course MBEC EE 2355 Design of Electrical Machines. It includes 5 units covering various topics:
Unit 1 introduces major considerations in electrical machine design such as materials, loadings, thermal aspects and ratings.
Unit 2 covers DC machine design including output equations, dimensions, magnetic circuit calculations and performance prediction.
Unit 3 discusses transformer design including output equations, dimensions, cooling methods and operating characteristics.
Unit 4 focuses on induction motor design including output equations, dimensions, leakage calculations and operating characteristics.
Unit 5 examines synchronous machine design such as output equations, design of salient pole and turbo alternator machines.
The syllabus also lists the textbook and references
Super Capacitors Energy Storage System Applied in the Micro Grid
A super capacitor has been employed in the micro grid in order to store when energy is ample and discharges to the grid under faulty conditions
transmission-lines
This document discusses transmission line theory and analysis. It begins by explaining how power is delivered through wires at low frequencies versus through electric and magnetic fields at microwave frequencies, defining transmission lines. It then lists common types of transmission lines including two-wire, coaxial cable, waveguide, and planar lines. It analyzes the differences between analyzing circuits at low versus high frequencies. Finally, it provides details on metallic cable transmission media, including balanced vs unbalanced lines, equivalent circuits, wave propagation, losses, phasors, and characteristic impedance.
UltraCapacitor
This document provides an overview of ultracapacitors, also known as supercapacitors or double-layer capacitors. It defines ultracapacitors as energy storage devices that store energy electrostatically without chemical reactions. The document describes the construction of ultracapacitors including porous electrodes, an electrolyte, separator, and current collectors. It also explains the formation of an electric double layer and types of ultracapacitors such as double-layer, pseudocapacitors, and hybrid capacitors. Applications mentioned include electronics, electric vehicles, and backup power systems.
Jan29 ppt1
This document discusses direct current (DC) motors. It defines a DC motor as a device that converts DC electrical energy into mechanical energy. It explains how DC motors operate based on Faraday's Law of electromagnetic induction and Fleming's left hand rule. Common applications of DC motors include in hazardous areas, industrial equipment, remote controls, and HVAC. New trends are brushless DC motors which overcome disadvantages of traditional DC motors and integrate the motor and drive electronics.
Schematic powerpoint
A schematic is a diagram that represents an electrical or mechanical system. It shows how a circuit functions and is used as a roadmap. Common symbols in schematics represent components like resistors, capacitors, diodes, transistors, batteries, switches, and logic gates. Understanding what each symbol means allows the schematic to show how current flows through the entire circuit.
EE6352
This document outlines the syllabus for the course EE6352 - Electrical Engineering and Instrumentation. The course is divided into 5 units that cover topics such as DC machines, transformers, induction and synchronous machines, basics of measurements and instrumentation, and analog and digital instruments. It also lists some recommended reference books for the course. The course aims to teach students about the principles and applications of electrical machines, transformers, and instrumentation through theory, problems, and examples.
connecting resistors
In a series circuit, current can only flow through one path and the voltage is divided across each resistor. The total resistance of multiple resistors in series is equal to the sum of each individual resistance. In a parallel circuit, current can flow through multiple paths and the voltage is the same across each resistor, while the current varies. Parallel circuits have advantages over series circuits in that each device sees the full voltage and devices can be independently turned off without stopping current to others.
Supercapacitors in Transportation Applications
The transportation industry continues to adopt more supercapacitors into their designs each year. Advantages in power density, cold temperature performance, and lifetime make them suitable for accompanying or replacing a battery bank.
This presentation introduces what a supercapacitor is (it isn't just a big capacitor!), some characteristics to consider, and two applications of ELDCs.
This paper was presented by KEMET at the 2015 Applied Power Electronic Conference in Charlotte, NC.
Highly reliable transformerless photovoltaic inverters with leakage current a...
Highly Reliable Transformerless Photovoltaic Inverters With Leakage Current and Pulsating Power Elimination
This paper presents a transformerless inverter topology, which is capable of simultaneously solving leakage current and pulsating power issues in grid-connected photovoltaic (PV) systems. Without adding any additional components to the system, the leakage current caused by the PV-to-ground parasitic capacitance can be bypassed by introducing a common-mode (CM) conducting path to the inverter. The resulting ground leakage current is therefore well controlled to be below the regulation limit. Furthermore, the proposed inverter can also eliminate the well-known double-line-frequency pulsating power that is inherent in single-phase PV systems. By properly injecting CM voltages to the output filter capacitors, the pulsating power can be decoupled from the dc-link. Therefore, it is possible to use long-lifetime film capacitors instead of electrolytic capacitors to improve the reliability of the PV system. The mechanism of leakage current suppression and the closed-loop control of pulsating power decoupling are discussed in this paper in detail. A 500-W prototype was also built and tested in the laboratory, and both simulation and experimental results are finally presented to show the excellent performance of the proposed PV inverter.
Web : http://www.lemenizinfotech.com
Web : http://ieeemaster.com
Web : http://www.lemenizinfotech.com/power-system-ieee-projects-2016-2017/
Web : http://ieeemaster.com/power-system-ieee-projects-2016-2017/
Address: 36, 100 Feet Road(Near Indira Gandhi Statue), Natesan Nagar, Pondicherry-605 005
Contact numbers: +91 95663 55386, 99625 88976 (0413) 420 5444
Mail : projects@lemenizinfotech.com
Mobile : 9566355386 / 9962588976
Deip soni_Direct current
Direct current (DC) is an unidirectional electric current that flows in a constant direction, distinguishing it from alternating current (AC). DC is produced by sources like batteries and solar cells. It can flow through conductors like wires as well as semiconductors and vacuums. While early electric power transmission used DC, AC distribution is now dominant due to advantages in transforming and transmitting power over long distances. However, DC is still used for applications requiring direct current flow, like battery charging and most electronic systems.
Supercapacitor module applications for customers
Supercapacitor modules provide high energy storage capacity at higher voltages than individual supercapacitors. They are being used in a growing number of industrial, transportation, and green energy applications where short bursts of energy or power smoothing is needed. Custom supercapacitor modules can be designed to meet specific customer needs and specifications.
Silicon Solar Brochure - TruPower Portable Solar Power Systems
The TruPower portable solar power systems come in 150W and 350W models and are designed to be compact, durable, and easy to use portable power sources for outdoor activities. They use solar panels, inverters, batteries, and charging circuits to efficiently charge electronic devices like phones, cameras, tablets, and laptops from solar power or wall outlets. The systems can provide multiple charges to smartphones, fewer charges to tablets, and a charge or two for laptops per charge depending on the wattage of the model.
ULTRA CAPACITORS
This document discusses ultracapacitors and their advantages over batteries. It begins with an introduction to energy storage and batteries. It then explains that ultracapacitors can charge and discharge much faster than batteries. The document outlines the working of ultracapacitors, which store electricity through physically separating positive and negative charges using a double-layer capacitance or pseudo capacitance. It lists applications like energy harvesting, railways, and the military. Advantages include fast charging, long lifespan, and high capacitance. Disadvantages are lower energy storage and faster discharge than batteries. The conclusion is that further research may lead ultracapacitors to replace batteries in the future.
What's hot (20)
Super Capacitors Energy Storage System Applied in the Micro Grid
Super Capacitors Energy Storage System Applied in the Micro Grid
Highly reliable transformerless photovoltaic inverters with leakage current a...
Highly reliable transformerless photovoltaic inverters with leakage current a...
Silicon Solar Brochure - TruPower Portable Solar Power Systems
Silicon Solar Brochure - TruPower Portable Solar Power Systems
Similar to Power system practice and design
4th sem new
This document provides details of the modified course curriculum for the 4th semester BTech program in Electrical Engineering. It includes 10 courses with a total credit of 28. Some of the key courses include Electrical Machines-I, Power Systems I, Digital Electronics, Circuit Theory, and Microprocessors & Microcontrollers. For each course, the document provides information on course code, credit hours, prerequisites, topics to be covered, reference books, and course outcomes. It also provides the course structure for the Electrical Machines-I course including detailed topics in each part.
POWER SYSTEM PLANNING AND DESIGN. DESIGN OF EHV TRANSMISSION LINES & BUNDLED ...
This document discusses the design of extra high voltage transmission lines and bundled conductors in EHV lines. It outlines the advantages of EHV lines such as reduced transmission losses and material requirements. However, it also notes disadvantages like increased corona losses and insulation needs. Key design considerations for EHV lines include the choice of operating voltage, grounding method, conductor selection, and insulator selection. For lines above 400kV, bundled conductors are used and the document discusses formulas for calculating the inductance, capacitance, surge impedance, and surge impedance loading to determine bundling requirements.
HVDC Syllabus.pptx
This document outlines the syllabus for a course on HVDC transmission taught in the Department of Electrical and Electronics Engineering at Lendi Institute of Engineering and Technology. It includes 6 units that cover basic concepts of HVDC transmission, analysis of HVDC converters, converter and HVDC system control, reactive power control, AC/DC power flow analysis, converter faults and protections, harmonics, and filters. It also lists the learning objectives, outcomes, faculty profile, textbooks, and reference books for the course.
POLYTECHNIC DIPLOMA.pptx
Admission opens for polytechnic diploma course in India 2022-24 at OPJS University. Get the detail of the course, syllabus, fees- 8306377703
Understand the structure of power system, computation of transmission line pa...
Understand the structure of power system, computation of transmission line pa...Karthikkumar Shanmugam
This document outlines the course structure and content for EE8402 TRANSMISSION AND DISTRIBUTION. The course is divided into 5 units that cover topics such as transmission line parameters, modeling transmission line performance, mechanical design of transmission lines, underground cables, and distribution systems. Textbooks and references used for the course are also listed.POLYTECHNIC DIPLOMA.pdf
Admission opens for polytechnic diploma course in India 2022-24 at OPJS University. Get the detail of the course, syllabus, fees- 8306377703
all sensor notes.PDF
This document discusses various types of displacement sensors, including resistive, inductive, capacitive, piezoelectric, laser interferometer, bore gaging, ultrasonic time-of-flight, optical encoder, magnetic, synchro/resolver, optical fiber, and optical beam deflection sensors. It focuses on resistive displacement sensors, describing precision potentiometers, their resistive elements, electrical characteristics, and applications in precision measurement.
EEC NOTES.docx
This document outlines the course syllabus for 10EE81 Electrical Design Estimation and Costing. It includes 8 units that cover topics such as general principles of estimation, residential and commercial building electrification, service connections, overhead transmission line design, and substation design. The first unit discusses electrical scheduling, catalogues, market surveys, cost determination methods, purchase processes, and relevant acts and rules. Subsequent units cover estimating procedures for specific electrical system applications and components. The document provides an overview of the course content and objectives.
Jntuh b.tech 3 year ece r16 syllabus
The document provides the course structure and syllabus for the 3rd year 1st semester of the B.Tech Electronics and Communication Engineering program at Jawaharlal Nehru Technological University Hyderabad for the 2016-2017 admitted batch. It lists the courses offered in the semester along with their course codes, titles, credits, and brief descriptions. The semester includes courses on electromagnetic theory, linear and digital integrated circuits, digital communications, fundamentals of management, and labs. It also provides details of the professional elective courses offered in the following semester.
Ehv substation
This document provides an overview of HVDC (high voltage direct current) fundamentals. It discusses how HVDC transmission works, the technical advantages it provides over AC transmission such as higher power capacity per conductor and smaller tower size. It also discusses some economic considerations, noting that HVDC has lower line costs but more expensive converter stations, with a typical break-even distance of 500-800 km for overhead lines. Different HVDC system configurations like monopolar and bipolar links are also introduced.
Introduction.pptx
This document provides information about an Electrical Technology course taught at the Indian Institute of Technology Bhubaneswar. It outlines the course instructors, assessment breakdown, syllabus topics including DC and AC circuits, transformers, and electrical machines. The course aims to introduce students to concepts of power generation, transmission, and distribution through various means such as thermal, hydel, and nuclear power stations and the components that enable large-scale power systems.
3 ece aw pby jpk
1. The document discusses antenna fundamentals and wave propagation. It covers topics such as radiation mechanisms from single and multiple wire antennas, antenna parameters, thin linear antennas, antenna arrays, non-resonant radiators, VHF/UHF/microwave antennas, and wave propagation mechanisms.
2. Key concepts covered include radiation occurring when an electromagnetic field from a source is transmitted to an antenna system, radiation from a single wire requiring time-varying current, and radiation from two wires creating electric and magnetic fields when a voltage is applied.
3. Various antenna types are examined including dipoles, loops, arrays, reflector antennas, and traveling wave antennas. Parameters like directivity, gain, beamwidth and
3 ECE AWP.pdf
This document provides information about antennas and wave propagation. It includes 6 units that cover topics such as antenna fundamentals, thin linear wire antennas, antenna arrays, non-resonant radiators, VHF/UHF/microwave antennas, and wave propagation. Some key concepts discussed include radiation mechanisms from single wires, dipoles and arrays; current distributions on thin wire antennas; antenna parameters like radiation patterns, beamwidths and directivity; array types including uniform linear and Yagi-Uda arrays; and propagation modes like ground waves, sky waves and space waves. The document also lists textbook and reference materials for further reading.
RRB govt job syllabus 2019
The document provides syllabus details for various engineering subjects for the Civil & Allied Engineering Exam Group - JE. It lists 23 topics that candidates will be tested on, including engineering mechanics, building construction, building materials, construction methods, building drawings, concrete technology, surveying, computer aided design, geotechnical engineering, hydraulics, irrigation engineering, mechanics of structures, theory of structures, design of concrete and steel structures, transportation engineering, highway engineering, environmental engineering, advanced construction techniques, estimating and costing, contracts and accounts.
It also provides similar syllabus breakdowns for the Electrical & Allied Engineering Exam Group - JE (18 topics), Electronics & Allied Engineering Exam Group - JE (10 topics),
physics-split-up-xii-delhi-region-1 (1).docx
An atom is the basic building block of chemistry. It is the smallest unit into which matter can be divided without the release of electrically charged particles. It also is the smallest unit of matter that has the characteristic properties of a chemical element
Electrical Distribution Systems: Syllabus
This document outlines the syllabus for an Electrical Distribution Systems course, including course objectives, outcomes, textbooks, and content of each unit. The course objectives are to study various factors of distribution systems, design substations and feeders, determine voltage drop and power loss, understand protection and coordination, and the effects of compensation and voltage control. The 6 units cover general concepts, substation design, system analysis, protection and coordination, power factor improvement through compensation, and voltage control. The objectives are for students to understand distribution systems, design components, perform analyses, and apply concepts like protection, compensation and control.
Transmission Line
The term high voltage characterizes electrical circuits in which the voltage used is the cause of particular safety concerns & insulation requirements. High voltage is used in electrical power distribution, in cathode ray tubes, to generate x-rays & particle beams, to demonstrate arcing, for ignition, in photomultiplier tubes & high power amplifier vacuum tubes & other industrial & scientific applications .
Design Development and Simulation of Mobile Substation for Distribution Network
This document discusses the design, development and simulation of a mobile substation for distribution networks. It aims to evaluate design parameters for mobile substations and identify situations where they are needed. Mobile substations are presented as an alternative to costly construction of permanent substations, as they can be moved to different locations as needed. The document outlines the key components of a mobile substation, describes engineering calculations for system parameters, and presents simulation results showing the mobile substation operating under normal and fault conditions. The simulation validated the selection of equipment and showed the system response met expectations. Mobile substations were concluded to offer flexibility for temporary power needs like large events or construction projects.
Module 4 power generation & Economics - Substation vtu syllabus
This document provides an overview of electrical substation equipment and components. It discusses key substation equipment like transformers, circuit breakers, protective relays, buses, surge arresters, insulators, conductors, and fuses. It also covers different types of substations including transmission, distribution, converter and collector substations. Classification of substations is discussed based on voltage levels, construction features, and applications.
Techno economic study of series current limiting reactor and its impact in th...
This document presents a techno-economic study of installing series current limiting reactors in an 11kV distribution network to limit fault currents. It describes the electrical network configuration, connected loads including nonlinear loads, and existing fault levels. ETAP system studies were conducted for 0.3 and 0.5 ohm reactor options, including load flow analysis, short circuit studies accounting for variations in source impedance ratio and fault current, and harmonic assessment. The studies showed that both reactor options maintained acceptable voltage regulation but the 0.3 ohm reactor resulted in fault currents below the switchgear rating. Manufacturers of oil-filled reactors were identified.
Similar to Power system practice and design (20)
POWER SYSTEM PLANNING AND DESIGN. DESIGN OF EHV TRANSMISSION LINES & BUNDLED ...
POWER SYSTEM PLANNING AND DESIGN. DESIGN OF EHV TRANSMISSION LINES & BUNDLED ...
Understand the structure of power system, computation of transmission line pa...
Understand the structure of power system, computation of transmission line pa...
Design Development and Simulation of Mobile Substation for Distribution Network
Design Development and Simulation of Mobile Substation for Distribution Network
Module 4 power generation & Economics - Substation vtu syllabus
Module 4 power generation & Economics - Substation vtu syllabus
Techno economic study of series current limiting reactor and its impact in th...
Techno economic study of series current limiting reactor and its impact in th...
More from Hemal Ariwala
Guidelines regarding departmental elective
This document provides guidelines for electrical engineering students to choose their department elective subject for semester 8. It lists 3 elective groups: power systems, microprocessors, and power electronics. Students must choose one of these groups in semester 7, and in semester 8 they will be required to take the corresponding advanced subject from the same group. For example, choosing advanced power systems in semester 7 means the student must take advanced power systems 2 in semester 8.
Electrical power utilization
This document outlines the course contents for the subject Electrical Power Utilization for the 8th semester of the Bachelor of Electrical Engineering program at Gujarat Technological University. The course covers 5 main topics: 1) Electric Drives, including different types of motors, starting and speed control methods, and applications. 2) Electrical Traction, covering various traction systems, track electrification, mechanics of train movement, and traction motor characteristics. 3) Electrical Heating & Welding, including resistive, induction, arc and dielectric heating as well as different types of electric welding. 4) Electrolytic Processes, covering principles of electrolysis and applications like electroplating. 5) Illuminations, discussing types of lamps, lighting
Commissioning of electrical equipments
This document outlines the course contents for the subject "Commissioning of Electrical Equipments" in the 8th semester of the Electrical Engineering program at Gujarat Technological University. It details the various testing and commissioning procedures for major electrical equipment including transformers, induction motors, substation equipment, circuit breakers, DC machines, synchronous machines, and transmission lines and cables. The term work will involve applying the concepts from the syllabus and reference books are provided for further study.
Advanced processor and controllers
This document outlines the course contents for an advanced processors and controllers class, including three main topics:
1. Programmable logic controllers (PLCs), covering PLC programming procedures, input/output interfacing, ladder logic, timer/counter/arithmetic functions, and applications like motor and process controls.
2. Digital signal processing, including discrete time signals and systems, properties of linear time-invariant systems, and z-transforms.
3. Digital signal processors, focusing on the TMS320LF2407 architecture, instruction set, general purpose I/O, interrupts, event managers including timers and capture units. Experiments involve assembly and C programming using addressing modes and instructions.
Advanced power electronics ii
This document outlines the course contents for an advanced power electronics course focusing on Flexible AC Transmission Systems (FACTS) and HVDC transmission. The course covers topics such as reactive power control in transmission systems, conventional reactive power compensators like thyristor-controlled reactors and capacitors, HVDC transmission system development and equipment, HVDC converter types including six pulse and twelve pulse configurations, converter operation and analysis, and HVDC system control mechanisms. The course aims to provide students understanding of flexible transmission technologies for improving power transfer capacity and stability of electrical networks.
scheme
This document outlines the proposed teaching scheme for the 8th semester of the electrical engineering degree program at Gujarat Technological University. It lists 7 subjects totaling 16 theory hours, 14 practical hours, and 30 credits. The subjects include Commissioning of Electrical Equipments, Electrical Power Utilization, Power System Practice and Design, Electrical Machine Design II, Project II, and a choice of Department Elective II such as Advanced Power System II, Advanced Power Electronics II, or Advanced Processor and Controllers.
Advanced power system ii
This document outlines the course contents for an Advanced Power Systems II class, including 5 main topics: 1) state estimation of power systems, 2) power system security, 3) reactive power control and voltage stability, 4) load forecasting techniques, and 5) preventive, emergency, and restorative control. It provides an overview of the key concepts and analytical methods covered in each topic area, along with recommended reference materials, suggested laboratory work involving programming and simulation, and opportunities for field visits.
Project i
This document outlines the requirements for the project course taken during the 7th semester of the Electrical Engineering program. The project consists of two parts - stage I and stage II, with stage I including a pre-project and an electrical product survey. For stage I, students will be assigned a faculty guided project to work on preliminarily in the 7th semester and continue into the 8th. Additionally in the 7th semester, students will form groups to survey the market of various electrical items and prepare a report and presentation on their findings. The product survey aims to expose students to standard ratings and knowledge of electrical goods available. Groups will choose from a suggested list of electrical categories to research.
Inter connected power system
This document outlines the course contents for the subject "Inter Connected Power System" taught in the 7th semester of the B.E. in Electrical Engineering program. The course covers 6 main topics:
1) Introduction to power system interconnection and concepts like cascade tripping and islanding.
2) Formation of bus impedance and admittance matrices using various methods for power flow analysis.
3) Static load flow analysis using approximate, Gauss-Seidel and Newton Raphson methods.
4) Economic operation of power generators and transmission losses calculation.
5) Frequency and voltage control methods like governor control and tie-line load bias control.
6) Classification of stability studies and concepts of transient
Industrial instrumentation
This document provides an overview of the course content for Industrial Instrumentation at Gujarat Technological University. The course is a 7th semester subject for an Electrical Engineering B.E. degree. It includes 10 topics that cover various instrumentation concepts like transducers, strain measurement, displacement measurement, force and torque measurement, pressure measurement, flow measurement, level measurement, temperature measurement, recorders, and digital data acquisition systems and control. The course aims to teach students the principles and applications of instrumentation through both theoretical and practical sessions.
Electrical machine design
This document outlines the course contents for the subject Electrical Machine Design - 1. It includes the following topics:
1. General aspects of insulating materials, heating, cooling, electrical and magnetic loading, output coefficients, and factors affecting machine size.
2. Design of three phase transformers including core and winding calculations, cooling methods, output equations, and design for minimum cost/loss.
3. DC machine design including output equations, core dimensions, armature design, field system design, commutator/brush design, and considerations for large machines.
4. Design principles and winding design for current transformers.
Electrical engg. sem vii with project teaching scheme
This document outlines the proposed teaching scheme for semester 7 of an Electrical Engineering degree program. It lists 6 compulsory subjects totaling 16 credit hours of theory and 14 credit hours of practical/lab work. It also provides 1 elective subject option totaling 4 credit hours to fulfill the department elective requirement.
Advanced power
This document outlines the course contents for the subject "Advanced Power System-I" taken in the 7th semester of the Electrical Engineering program at Gujarat Technological University. The course covers various topics related to reactive power control in electrical transmission systems including conventional control mechanisms, flexible AC transmission systems (FACTS), and emerging transmission networks. Specific topics that will be covered include principles of reactive power compensators such as thyristor controlled reactors, fixed capacitor thyristor controlled reactors, thyristor switched capacitors, and thyristor switched capacitor thyristor controlled reactors. The course will also discuss HVDC transmission systems including their historical development, equipment requirements, operation of converters, control of HVDC converters and systems, and harmon
Advanced power el
1. The document outlines the course contents for the subject Advanced Power Electronics- I, which is a Department Elective-I subject for the 7th semester of the B.E. in Electrical Engineering at Gujarat Technological University.
2. The course covers topics such as resonant pulse inverters, multi-level converters, multi-pulse converters, power supplies including DC, AC, switched mode, and resonant supplies. It also covers electronically commutated motors including brushless DC drives, switched reluctance motor drives, and stepper motor drives.
3. Evaluation includes a mid-semester exam, practical internal exam, and a university exam with weighting on theory and practical components. Textbooks and
Advanced system(department elective i)
This document outlines the course contents and structure for an Advanced Microcontrollers & Embedded Systems course. The course covers topics like advancement in 8051 architecture including timers and communication, serial communication protocols like SPI and I2C, high-end microcontrollers and peripherals like CIP-51 architecture, and programming and embedded software architecture including real-time operating systems. The course involves both theory and practical sessions, with evaluation based on a mid-semester exam, end-semester university exam, and internal assessment of practical sessions.
More from Hemal Ariwala (15)
Electrical engg. sem vii with project teaching scheme
Electrical engg. sem vii with project teaching scheme
Recently uploaded
The Ipsos - AI - Monitor 2024 Report.pdf
According to Ipsos AI Monitor's 2024 report, 65% Indians said that products and services using AI have profoundly changed their daily life in the past 3-5 years.
Natural Language Processing (NLP), RAG and its applications .pptx
1. In the realm of Natural Language Processing (NLP), knowledge-intensive tasks such as question answering, fact verification, and open-domain dialogue generation require the integration of vast and up-to-date information. Traditional neural models, though powerful, struggle with encoding all necessary knowledge within their parameters, leading to limitations in generalization and scalability. The paper "Retrieval-Augmented Generation for Knowledge-Intensive NLP Tasks" introduces RAG (Retrieval-Augmented Generation), a novel framework that synergizes retrieval mechanisms with generative models, enhancing performance by dynamically incorporating external knowledge during inference.
The Building Blocks of QuestDB, a Time Series Database
Talk Delivered at Valencia Codes Meetup 2024-06.
Traditionally, databases have treated timestamps just as another data type. However, when performing real-time analytics, timestamps should be first class citizens and we need rich time semantics to get the most out of our data. We also need to deal with ever growing datasets while keeping performant, which is as fun as it sounds.
It is no wonder time-series databases are now more popular than ever before. Join me in this session to learn about the internal architecture and building blocks of QuestDB, an open source time-series database designed for speed. We will also review a history of some of the changes we have gone over the past two years to deal with late and unordered data, non-blocking writes, read-replicas, or faster batch ingestion.
一比一原版(Coventry毕业证书)考文垂大学毕业证如何办理
毕业原版【微信:41543339】【(Coventry毕业证书)考文垂大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Glasgow毕业证书)格拉斯哥大学毕业证如何办理
毕业原版【微信:41543339】【(Glasgow毕业证书)格拉斯哥大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
原版制作(Deakin毕业证书)迪肯大学毕业证学位证一模一样
学校原件一模一样【微信：741003700 】《(Deakin毕业证书)迪肯大学毕业证学位证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UO毕业证)渥太华大学毕业证如何办理
UO毕业证录取书【微信95270640】购买（渥太华大学毕业证成绩单硕士学历）Q微信95270640代办UO学历认证留信网伪造渥太华大学学位证书精仿渥太华大学本科/硕士文凭证书补办渥太华大学 diplomaoffer,Transcript购买渥太华大学毕业证成绩单购买UO假毕业证学位证书购买伪造渥太华大学文凭证书学位证书,专业办理雅思、托福成绩单，学生ID卡，在读证明，海外各大学offer录取通知书，毕业证书，成绩单，文凭等材料:1:1完美还原毕业证、offer录取通知书、学生卡等各种在读或毕业材料的防伪工艺（包括 烫金、烫银、钢印、底纹、凹凸版、水印、防伪光标、热敏防伪、文字图案浮雕，激光镭射，紫外荧光，温感光标）学校原版上有的工艺我们一样不会少，不论是老版本还是最新版本，都能保证最高程度还原，力争完美以求让所有同学都能享受到完美的品质服务。
文凭办理流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信95270640我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：渥太华大学渥太华大学毕业证文凭证书全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信95270640）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——那人一听朝山娃尴尬地笑笑悻悻地走了山娃立马“嘭的一声将铁门锁死心却咚咚地乱跳当山娃跟父亲说起这事时父亲很吃惊抚摸着山娃的头说还好醒得及时要不家早被人掏空了到时连电视也没得看啰不过父亲还是夸山娃能临危不乱随机应变有胆有谋山娃笑笑说那都是书上学的看童话和小说时多
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
The Modern Marketing Reckoner (MMR) is a comprehensive resource packed with POVs from 60+ industry leaders on how AI is transforming the 4 key pillars of marketing – product, place, price and promotions.
Population Growth in Bataan: The effects of population growth around rural pl...
A population analysis specific to Bataan.
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Harness the power of AI-backed reports, benchmarking and data analysis to predict trends and detect anomalies in your marketing efforts.
Peter Caputa, CEO at Databox, reveals how you can discover the strategies and tools to increase your growth rate (and margins!).
From metrics to track to data habits to pick up, enhance your reporting for powerful insights to improve your B2B tech company's marketing.
- - -
This is the webinar recording from the June 2024 HubSpot User Group (HUG) for B2B Technology USA.
Watch the video recording at https://youtu.be/5vjwGfPN9lw
Sign up for future HUG events at https://events.hubspot.com/b2b-technology-usa/
一比一原版(爱大毕业证书)爱丁堡大学毕业证如何办理
毕业原版【微信:41543339】【(爱大毕业证书)爱丁堡大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(Bradford毕业证书)布拉德福德大学毕业证如何办理
原版定制【微信:41543339】【(Bradford毕业证书)布拉德福德大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UofS毕业证书)萨省大学毕业证如何办理
原版定制【微信:41543339】【(UofS毕业证书)萨省大学毕业证】【微信:41543339】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
原版制作(swinburne毕业证书)斯威本科技大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(swinburne毕业证书)斯威本科技大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Data and AI
Discussion on Vector Databases, Unstructured Data and AI
https://www.meetup.com/unstructured-data-meetup-new-york/
This meetup is for people working in unstructured data. Speakers will come present about related topics such as vector databases, LLMs, and managing data at scale. The intended audience of this group includes roles like machine learning engineers, data scientists, data engineers, software engineers, and PMs.This meetup was formerly Milvus Meetup, and is sponsored by Zilliz maintainers of Milvus.
在线办理(英国UCA毕业证书)创意艺术大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(英国UCA毕业证书)创意艺术大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(UMN文凭证书)明尼苏达大学毕业证如何办理
毕业原版【微信:176555708】【(UMN毕业证书)明尼苏达大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Learn SQL from basic queries to Advance queries
Dive into the world of data analysis with our comprehensive guide on mastering SQL! This presentation offers a practical approach to learning SQL, focusing on real-world applications and hands-on practice. Whether you're a beginner or looking to sharpen your skills, this guide provides the tools you need to extract, analyze, and interpret data effectively.
Key Highlights:
Foundations of SQL: Understand the basics of SQL, including data retrieval, filtering, and aggregation.
Advanced Queries: Learn to craft complex queries to uncover deep insights from your data.
Data Trends and Patterns: Discover how to identify and interpret trends and patterns in your datasets.
Practical Examples: Follow step-by-step examples to apply SQL techniques in real-world scenarios.
Actionable Insights: Gain the skills to derive actionable insights that drive informed decision-making.
Join us on this journey to enhance your data analysis capabilities and unlock the full potential of SQL. Perfect for data enthusiasts, analysts, and anyone eager to harness the power of data!
#DataAnalysis #SQL #LearningSQL #DataInsights #DataScience #Analytics
Global Situational Awareness of A.I. and where its headed
You can see the future first in San Francisco.
Over the past year, the talk of the town has shifted from $10 billion compute clusters to $100 billion clusters to trillion-dollar clusters. Every six months another zero is added to the boardroom plans. Behind the scenes, there’s a fierce scramble to secure every power contract still available for the rest of the decade, every voltage transformer that can possibly be procured. American big business is gearing up to pour trillions of dollars into a long-unseen mobilization of American industrial might. By the end of the decade, American electricity production will have grown tens of percent; from the shale fields of Pennsylvania to the solar farms of Nevada, hundreds of millions of GPUs will hum.
The AGI race has begun. We are building machines that can think and reason. By 2025/26, these machines will outpace college graduates. By the end of the decade, they will be smarter than you or I; we will have superintelligence, in the true sense of the word. Along the way, national security forces not seen in half a century will be un-leashed, and before long, The Project will be on. If we’re lucky, we’ll be in an all-out race with the CCP; if we’re unlucky, an all-out war.
Everyone is now talking about AI, but few have the faintest glimmer of what is about to hit them. Nvidia analysts still think 2024 might be close to the peak. Mainstream pundits are stuck on the wilful blindness of “it’s just predicting the next word”. They see only hype and business-as-usual; at most they entertain another internet-scale technological change.
Before long, the world will wake up. But right now, there are perhaps a few hundred people, most of them in San Francisco and the AI labs, that have situational awareness. Through whatever peculiar forces of fate, I have found myself amongst them. A few years ago, these people were derided as crazy—but they trusted the trendlines, which allowed them to correctly predict the AI advances of the past few years. Whether these people are also right about the next few years remains to be seen. But these are very smart people—the smartest people I have ever met—and they are the ones building this technology. Perhaps they will be an odd footnote in history, or perhaps they will go down in history like Szilard and Oppenheimer and Teller. If they are seeing the future even close to correctly, we are in for a wild ride.
Let me tell you what we see.
Recently uploaded (20)
Natural Language Processing (NLP), RAG and its applications .pptx
Natural Language Processing (NLP), RAG and its applications .pptx
The Building Blocks of QuestDB, a Time Series Database
The Building Blocks of QuestDB, a Time Series Database
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
Population Growth in Bataan: The effects of population growth around rural pl...
Population Growth in Bataan: The effects of population growth around rural pl...
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
06-04-2024 - NYC Tech Week - Discussion on Vector Databases, Unstructured Dat...
Global Situational Awareness of A.I. and where its headed
Global Situational Awareness of A.I. and where its headed
Power system practice and design
- 1. GUJARAT TECHNOLOGICAL UNIVERSITY B.E. SEMESTER : VIII ELECTRICAL ENGINEERING Subject Name: POWER SYSTEM PRACTICE AND DESIGN Sr. No. Course Contents Total Hrs 1. Transmission Line Design: Electrical design of transmission line Design philosophy, voltage level selection and choice of conductors, spacing of conductor and corona, insulators and SIL, design problem. Mechanical design of transmission line: Considerations, loading on conductors, span, sag and tension clearance, stringing, problems. Transmission line tower design: Location of tower, earth wires, reduction of tower footing resistance, design of tower, examples. EHV transmission line design: Considerations, selection, spacing of conductors, corona and radio interference, shunt and series compensation, tuned power lines, insulation coordination and different types of EHV towers, EHV systems in India. 10 2. AC and DC Low Tension Distribution Design: Types of distribution systems: arrangements, selection and size of feeders using Kelvin’s law, design of cables in distribution systems considering ampere capacity, voltage drop during starting and running load, primary distribution design, secondary distribution design. HV distribution design concept, load balancing Distribution substation, Calculation of distributor size and its examples, calculation of voltage drops and size of distributor in ring system. Voltage regulation and lamp flicker. 10 3. Substation Design: Determination of voltage regulation and losses in power system, shifting of distribution transformer centre, Substation layout, sizes and locations of sub stations, Substation equipments specifications ratings and its operation from design view point, Cathodic Protection, Gas Insulated Substation (GIS). 06 4. Power System Earthing – Power Station and Sub Station Earthing Objectives, definitions, tolerable limits of body currents, soil resistivity, measurement of soil resistivity, earth resistance, measurement of earth resistance, tolerable step and touch voltage, actual step and touch voltage, design of earthing grid, impulse behaviour of earthing system. 05 5. Design of Power Station: Introduction, selection of sizes and location of generating stations, interconnections issues with wind and Solar PV. 03 6. Insulation Coordination and Location of Lightning Arrestor : Introduction, definitions, insulation-co-ordination curves, determination of line insulation, Basic Insulation level (BIL), Insulation levels of substation equipments, Lightning arrestor selection and location, Selection of arrestor voltage rating, arrestor discharge voltage and arrestor discharge current, protective margin. 05 7. HVDC Transmission: Merits and demerits of HVDC transmission, one line diagram, types of DC link, necessary equipments, operation and control, applications, recent advances, HVDC in India. 03 Note: It is suggested that based on the above syllabus, visits for LT/HT Electrification and 220KV/ 400 KV substations should be carried out. Books: 1. Electrical Power System Design – M. V. Deshpande, TMH publication 2. Electrical Power System Design – B. R. Gupta, S. CHAND 3. Electrical Power System Planning – A. S. Pabla, TMH publication 4. Substation Design – Satnam & Gupta, Dhanpat Rai and Co. 5. A course in Electrical Power- Soni,,Gupta and Bhatnagar, Dhanpat Rai & Sons