PolyPlus and enzo mb injection moulding test
•
1 like•234 views
This document summarizes an injection moulding test comparing PolyPlus and Enzo MB materials. It describes a mould containing 12 knife cavities and 12 fork cavities used to produce plastic knives and forks. The mould was run on a 300-ton hydraulic injection machine with an automatic 19-second cycle using a robot. Temperature profiles and other test results are presented, finding no decrease in productivity or dimensional changes compared to standard processes, with benefits of reduced melting temperatures and power consumption.
Report
Share
Report
Share
Recommended
Kulon
This document summarizes a project to develop a gas turbine engine with oil-free transmission using contactless hybrid gas bearings. Key points include:
- The engine would improve fuel efficiency by 25% and reduce parts by 30% compared to traditional designs.
- Using gas bearings instead of oil would allow operation in any climatic conditions and allow increasing the rotor speed.
- The project is estimated to reduce maintenance costs, increase capacity, and reduce the price.
- The engine design includes 6 radial and 2 axial hybrid gas bearings that can withstand overloads up to 6g.
- The project team includes experts in physics, economics, aerospace engineering, and gas turbine development who aim to develop a high
Zinoffer
Zinoferr is developing an anticorrosive zinc-silicate coating called ZINOFERR for use in the oil industry to address the huge economic losses from corrosion of oil pipelines, as it is cheaper and more effective than existing solutions and can protect pipelines even when damaged, helping reduce costs for oil companies. The company is seeking 30 million rubles in capital to fund certification, research, commercialization and manufacturing scale-up to target a 10-12% share of the large and growing protective coatings market for oil infrastructure.
Turbo
Kiril Levkov proposes an innovative turbine called TurboSphere that utilizes natural gas overpressure energy. The TurboSphere is a 3-in-1 device that functions as a turbine, heat exchanger, and generator to produce electricity from low-grade heat energy between 20-40°C without consuming fuel. It can generate 15-500 kW of power and is smaller and applicable to more sites than existing turboexpanders. TurboEnergy plans to commercialize the TurboSphere, targeting 50% of sales to natural gas distributors and 50% to industrial and power customers, with the market potential reaching billions of rubles by 2035.
ccbl
This document describes an innovative new technology called CCBL for blending lubricants. CCBL offers significant advantages over traditional blending methods such as using 7 times less energy, being 5 times smaller, producing lubricants over 2 times faster, offering greater flexibility in production volumes from 1 ton, and achieving extra high product quality. The technology has been proven through pilot plants and laboratory testing. The company is now ready to commercialize CCBL and is seeking partners and investments to accelerate marketing and sales. They have an experienced international team and a detailed roadmap for development.
DHI UK - BRIEFING FOR UK AND IRELAND WATER COMPANIES - NO 4 - UDG EDITION - N...
BRIEFING FOR UK & IRELAND WATER COMPANIES
Welcome to a special 'CIWEM UDG 2016' issue of DHI-UK's biannual newsletter for Water Companies and their Consultants. The full and complete fourth edition will be available soon.
Publication is primarily through Linkedin, so please share with your colleagues and friends.
Ccp conference rcsd
The document describes a project by teachers to develop curriculum resources on carbon capture and storage for Saskatchewan schools. It began when a group approached the school division seeking resources on this emerging local technology. Teachers researched curriculum alignment and developed multimedia lessons for grades 3, 7 and 10 integrating carbon capture content. The resources highlight provincial science goals and address specific grade outcomes. Challenges included a changed contract and disseminating the materials more widely. Further development across more grades and subject areas would deepen integration of this sustainability topic into classrooms.
PLA RENEGADE filament - Similar Nylon Sintered Surface -
This document discusses a new PLA RENEGADE filament that has a similar surface to nylon for 3D printing. It is a confidential document from Keytech S.r.l. dated March 14, 2016 and warns against unauthorized copying.
Monitoring measuring and verification mmv
Presentation by Dr Elizabeth Burton, Global CCS Institute at the CCUS Workshop for CO2 Storage, January 22 at the University of Sonora, Hermosillo
Recommended
Kulon
This document summarizes a project to develop a gas turbine engine with oil-free transmission using contactless hybrid gas bearings. Key points include:
- The engine would improve fuel efficiency by 25% and reduce parts by 30% compared to traditional designs.
- Using gas bearings instead of oil would allow operation in any climatic conditions and allow increasing the rotor speed.
- The project is estimated to reduce maintenance costs, increase capacity, and reduce the price.
- The engine design includes 6 radial and 2 axial hybrid gas bearings that can withstand overloads up to 6g.
- The project team includes experts in physics, economics, aerospace engineering, and gas turbine development who aim to develop a high
Zinoffer
Zinoferr is developing an anticorrosive zinc-silicate coating called ZINOFERR for use in the oil industry to address the huge economic losses from corrosion of oil pipelines, as it is cheaper and more effective than existing solutions and can protect pipelines even when damaged, helping reduce costs for oil companies. The company is seeking 30 million rubles in capital to fund certification, research, commercialization and manufacturing scale-up to target a 10-12% share of the large and growing protective coatings market for oil infrastructure.
Turbo
Kiril Levkov proposes an innovative turbine called TurboSphere that utilizes natural gas overpressure energy. The TurboSphere is a 3-in-1 device that functions as a turbine, heat exchanger, and generator to produce electricity from low-grade heat energy between 20-40°C without consuming fuel. It can generate 15-500 kW of power and is smaller and applicable to more sites than existing turboexpanders. TurboEnergy plans to commercialize the TurboSphere, targeting 50% of sales to natural gas distributors and 50% to industrial and power customers, with the market potential reaching billions of rubles by 2035.
ccbl
This document describes an innovative new technology called CCBL for blending lubricants. CCBL offers significant advantages over traditional blending methods such as using 7 times less energy, being 5 times smaller, producing lubricants over 2 times faster, offering greater flexibility in production volumes from 1 ton, and achieving extra high product quality. The technology has been proven through pilot plants and laboratory testing. The company is now ready to commercialize CCBL and is seeking partners and investments to accelerate marketing and sales. They have an experienced international team and a detailed roadmap for development.
DHI UK - BRIEFING FOR UK AND IRELAND WATER COMPANIES - NO 4 - UDG EDITION - N...
BRIEFING FOR UK & IRELAND WATER COMPANIES
Welcome to a special 'CIWEM UDG 2016' issue of DHI-UK's biannual newsletter for Water Companies and their Consultants. The full and complete fourth edition will be available soon.
Publication is primarily through Linkedin, so please share with your colleagues and friends.
Ccp conference rcsd
The document describes a project by teachers to develop curriculum resources on carbon capture and storage for Saskatchewan schools. It began when a group approached the school division seeking resources on this emerging local technology. Teachers researched curriculum alignment and developed multimedia lessons for grades 3, 7 and 10 integrating carbon capture content. The resources highlight provincial science goals and address specific grade outcomes. Challenges included a changed contract and disseminating the materials more widely. Further development across more grades and subject areas would deepen integration of this sustainability topic into classrooms.
PLA RENEGADE filament - Similar Nylon Sintered Surface -
This document discusses a new PLA RENEGADE filament that has a similar surface to nylon for 3D printing. It is a confidential document from Keytech S.r.l. dated March 14, 2016 and warns against unauthorized copying.
Monitoring measuring and verification mmv
Presentation by Dr Elizabeth Burton, Global CCS Institute at the CCUS Workshop for CO2 Storage, January 22 at the University of Sonora, Hermosillo
50687710-A-Presentation-on-Escorts-Tractor
This document provides an overview of Escorts Tractors presented by Anurag Pratap Solanki. It discusses the history and profile of Escorts Ltd, including its founding in 1944 and industries including tractor manufacturing. It also outlines Escorts' competitors in the tractor industry like Swaraj, John Deere, Sonalika, Mahindra, and Massy. The presentation then describes Solanki's role as a sales executive at Escorts, his contributions, challenges faced, and SWOT analysis. It concludes by thanking Gauhati University, NIAM, and HIMS New Delhi.
Vaporizzatori GPL - LPG Vaporizers
ECOVAP provides quality management systems and product surveillance for CE PED certified medical devices. The company ensures products meet EU regulations through auditing manufacturing processes and reviewing product documentation. ECOVAP's services help medical device companies maintain certification and regulatory compliance.
Wet crude treatment
a very informative presentation about wet crude treatment in every step
for more information, see this article:
https://www.arab-oil-naturalgas.com/wet-crude-oil-treatment-plant/
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
Brave as a mountain lion text
Spider is afraid to participate in the school spelling bee but his family encourages him. His father tells him to pretend to be brave like a mountain lion. Later, his grandmother suggests pretending to be clever like a coyote. On the day of the bee, Spider takes their advice. He stands proudly on stage, turns his back to the audience, and listens to his spirit. Although he misspells a word, Spider is proud to come in second place. His family congratulates him on being brave like a mountain lion.
Bingo cards Set 1 for Henry's Freedom Box
The document appears to be a randomly generated list of words with historical American themes like slavery, railroads, factories, and the Civil War era. It does not form a coherent story or message on its own. The words are arranged in a grid-like format and could potentially be used for an activity like bingo that requires calling out listed items.
Tops and Bottoms voc
This document contains vocabulary words related to farming, finances, and emotions. It defines words like "wealth", "risky", "harvest", "crop", "profit", and actions like "to grunt", "to pluck off", "to scowl", "to yank", and "to tug". It also includes the word "tassel" and defines it as the pollen-bearing part of a corn plant.
Oil well drilling video course
This document provides an overview of oil well drilling topics including well casing, cementing, drilling mud systems, blowout preventers, drilling bits, well logging, directional drilling, drilling rigs, permeability, and porosity. It describes training materials for drilling engineers and rig staff that cover these topics through downloadable links from two servers.
Steel MAking: Lecture BOS and EAF
The document discusses the basic oxygen steelmaking (BOS) process and electric arc furnace (EAF) process for steel production. It provides details on:
- The BOS process uses oxygen to remove carbon and other impurities from liquid iron in large converters in 15 minutes, producing steel. Critical removal steps are carbon, phosphorus, and temperature adjustment.
- The EAF melts recycled steel scrap using electric arcs in the furnace. It can perform metallurgical operations like refining. Electrode breakage and slag foaming, properties, and reduction are discussed.
- Both processes conclude by tapping the molten steel into a ladle for further refining before casting.
2014 mike by dhi uk symposium user group meeting - presentations and papers...
- MIKE HYDRO River is the first release of the new River module within MIKE HYDRO. It provides a subset of MIKE 11 functionality including hydrodynamic modelling capabilities and selected GUI features ported from MIKE 11.
- Future releases will further develop MIKE HYDRO River to become a full replacement for the MIKE 11 'Classic' GUI, incorporating additional features and modules.
- MIKE HYDRO Basin is now the successor to MIKE BASIN for river basin management and planning projects. It provides an improved map-centric interface, modelling engine and features.
Polyplus in Home Appliance (serial production)
The document describes several injection molding production cases using PolyPlus that achieved cycle time reductions. Products included a dispenser body, top frame of a washing machine, door handle, refrigerator drawer, refrigerator balcony storage, valve body, and separator. Cycle time savings ranged from 25-54% when using PolyPlus compared to standard production without PolyPlus. All cases discussed were currently in running production.
Poly plus and 40% pp wood pulp (injection moulding test) (gb)
The document describes injection molding tests conducted with polypropylene containing 40% wood pulp (PP 40% wood pulp) with and without the addition of PolyPlus masterbatch additive. The tests found that adding 2% PolyPlus allowed processing PP 40% wood pulp at temperatures over 30°C lower compared to processing without PolyPlus, eliminating issues like gas formation, pyrolysis and burning during molding. This improved processability and resulted in parts with better aesthetics and mechanical properties.
Engineered valves for plastics polymers-pe-pp industry-Guichon valves
Custom made valves for Plastics-Polymers-PET-PBT-PTA industry-Guichon Valves, custom made valve,special valve, valve, industrial valves
Vannes spéciales pour production plastiques polymers pe pp-Guichon valves
Guichon Valves is a leading manufacturer of valves for polyethylene (PE) and polypropylene (PP) processes. It has over 30 years of experience in these industries and can provide custom valve solutions that meet the strict requirements for sealing, corrosion resistance, temperature and pressure ratings. Guichon Valves valves are referenced by major process licensors and the company has certifications for quality, environmental, and pressure equipment standards.
Polyplus in to PA66 (thixotropy effect)
This document discusses the thixotropic effect of adding PolyPlus to PA66 polymers. It describes injection molding tests conducted with and without 2% PolyPlus added. Test results showed that adding PolyPlus allowed processing at lower temperatures without increasing screw pressure. This reduced cycle times and shrinkage while allowing 40% faster cycle times for produced plastic parts. The PolyPlus takes advantage of the thixotropic property to reduce viscosity under shear, enabling lower temperature processing.
Plastics processing Manual (CIPET JAIPUR)
PLASTIC PROCESSING MANUAL OF CIPET JAIPUR
NARESH DHAKER
8890881858
CIPET JAIPUR
Plastics processing Manual (CIPET JAIPUR)
it is PDF are typed of myself. study triks & short & sweet (Technical manual) Of Diploma in Plastics technology(DPT-DPMT). All machine knowlage in plastics processing.
Er. Naresh Dhaker
(8890881858)
(CIPET JAIPUR)
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
ZX Presentation. 20140110
This document provides an overview of ZX factory facilities, products, certifications, and sales footprint. It discusses the size and capacity of ZX and DP manufacturing factories. It also describes ZX and DP's engineering abilities, quality control processes, and system management departments. The document highlights ZX's history and introduces their product lines including adjustable shocks and struts, electronic remote control systems, gas-filled shock absorbers, steering dampers, twin tube shocks, strut modules, cartridges, and adjustable suspension shock absorbers. It also lists the certificates ZX has obtained and their sales footprint in over 35 countries.
Presentation wts plastic
The document discusses fuel extraction from plastic waste through a process called pyrolysis. Pyrolysis involves heating plastic waste in an oxygen-free environment to produce pyro-oil, pyro-gas, and pyro-coke. While pyrolysis can utilize plastic waste, it has disadvantages like the produced outputs having high chlorine, sulfur, and hydrocarbon content which require further processing. Due to these serious disadvantages, the authors decided to rebuild the system to use catalytic cracking instead for plastic waste processing.
More Related Content
Viewers also liked
50687710-A-Presentation-on-Escorts-Tractor
This document provides an overview of Escorts Tractors presented by Anurag Pratap Solanki. It discusses the history and profile of Escorts Ltd, including its founding in 1944 and industries including tractor manufacturing. It also outlines Escorts' competitors in the tractor industry like Swaraj, John Deere, Sonalika, Mahindra, and Massy. The presentation then describes Solanki's role as a sales executive at Escorts, his contributions, challenges faced, and SWOT analysis. It concludes by thanking Gauhati University, NIAM, and HIMS New Delhi.
Vaporizzatori GPL - LPG Vaporizers
ECOVAP provides quality management systems and product surveillance for CE PED certified medical devices. The company ensures products meet EU regulations through auditing manufacturing processes and reviewing product documentation. ECOVAP's services help medical device companies maintain certification and regulatory compliance.
Wet crude treatment
a very informative presentation about wet crude treatment in every step
for more information, see this article:
https://www.arab-oil-naturalgas.com/wet-crude-oil-treatment-plant/
BEFORE AND AFTER TEST 2
The document discusses confidential documents and unauthorized copying. It is copyrighted by Keytech S.r.l. on March 9, 2016. The document repeatedly states "Confidential documents, unauthorized copying" and "BEFORE AND AFTER".
Brave as a mountain lion text
Spider is afraid to participate in the school spelling bee but his family encourages him. His father tells him to pretend to be brave like a mountain lion. Later, his grandmother suggests pretending to be clever like a coyote. On the day of the bee, Spider takes their advice. He stands proudly on stage, turns his back to the audience, and listens to his spirit. Although he misspells a word, Spider is proud to come in second place. His family congratulates him on being brave like a mountain lion.
Bingo cards Set 1 for Henry's Freedom Box
The document appears to be a randomly generated list of words with historical American themes like slavery, railroads, factories, and the Civil War era. It does not form a coherent story or message on its own. The words are arranged in a grid-like format and could potentially be used for an activity like bingo that requires calling out listed items.
Tops and Bottoms voc
This document contains vocabulary words related to farming, finances, and emotions. It defines words like "wealth", "risky", "harvest", "crop", "profit", and actions like "to grunt", "to pluck off", "to scowl", "to yank", and "to tug". It also includes the word "tassel" and defines it as the pollen-bearing part of a corn plant.
Oil well drilling video course
This document provides an overview of oil well drilling topics including well casing, cementing, drilling mud systems, blowout preventers, drilling bits, well logging, directional drilling, drilling rigs, permeability, and porosity. It describes training materials for drilling engineers and rig staff that cover these topics through downloadable links from two servers.
Steel MAking: Lecture BOS and EAF
The document discusses the basic oxygen steelmaking (BOS) process and electric arc furnace (EAF) process for steel production. It provides details on:
- The BOS process uses oxygen to remove carbon and other impurities from liquid iron in large converters in 15 minutes, producing steel. Critical removal steps are carbon, phosphorus, and temperature adjustment.
- The EAF melts recycled steel scrap using electric arcs in the furnace. It can perform metallurgical operations like refining. Electrode breakage and slag foaming, properties, and reduction are discussed.
- Both processes conclude by tapping the molten steel into a ladle for further refining before casting.
2014 mike by dhi uk symposium user group meeting - presentations and papers...
- MIKE HYDRO River is the first release of the new River module within MIKE HYDRO. It provides a subset of MIKE 11 functionality including hydrodynamic modelling capabilities and selected GUI features ported from MIKE 11.
- Future releases will further develop MIKE HYDRO River to become a full replacement for the MIKE 11 'Classic' GUI, incorporating additional features and modules.
- MIKE HYDRO Basin is now the successor to MIKE BASIN for river basin management and planning projects. It provides an improved map-centric interface, modelling engine and features.
Viewers also liked (12)
2014 mike by dhi uk symposium user group meeting - presentations and papers...
2014 mike by dhi uk symposium user group meeting - presentations and papers...
Similar to PolyPlus and enzo mb injection moulding test
Polyplus in Home Appliance (serial production)
The document describes several injection molding production cases using PolyPlus that achieved cycle time reductions. Products included a dispenser body, top frame of a washing machine, door handle, refrigerator drawer, refrigerator balcony storage, valve body, and separator. Cycle time savings ranged from 25-54% when using PolyPlus compared to standard production without PolyPlus. All cases discussed were currently in running production.
Poly plus and 40% pp wood pulp (injection moulding test) (gb)
The document describes injection molding tests conducted with polypropylene containing 40% wood pulp (PP 40% wood pulp) with and without the addition of PolyPlus masterbatch additive. The tests found that adding 2% PolyPlus allowed processing PP 40% wood pulp at temperatures over 30°C lower compared to processing without PolyPlus, eliminating issues like gas formation, pyrolysis and burning during molding. This improved processability and resulted in parts with better aesthetics and mechanical properties.
Engineered valves for plastics polymers-pe-pp industry-Guichon valves
Custom made valves for Plastics-Polymers-PET-PBT-PTA industry-Guichon Valves, custom made valve,special valve, valve, industrial valves
Vannes spéciales pour production plastiques polymers pe pp-Guichon valves
Guichon Valves is a leading manufacturer of valves for polyethylene (PE) and polypropylene (PP) processes. It has over 30 years of experience in these industries and can provide custom valve solutions that meet the strict requirements for sealing, corrosion resistance, temperature and pressure ratings. Guichon Valves valves are referenced by major process licensors and the company has certifications for quality, environmental, and pressure equipment standards.
Polyplus in to PA66 (thixotropy effect)
This document discusses the thixotropic effect of adding PolyPlus to PA66 polymers. It describes injection molding tests conducted with and without 2% PolyPlus added. Test results showed that adding PolyPlus allowed processing at lower temperatures without increasing screw pressure. This reduced cycle times and shrinkage while allowing 40% faster cycle times for produced plastic parts. The PolyPlus takes advantage of the thixotropic property to reduce viscosity under shear, enabling lower temperature processing.
Plastics processing Manual (CIPET JAIPUR)
PLASTIC PROCESSING MANUAL OF CIPET JAIPUR
NARESH DHAKER
8890881858
CIPET JAIPUR
Plastics processing Manual (CIPET JAIPUR)
it is PDF are typed of myself. study triks & short & sweet (Technical manual) Of Diploma in Plastics technology(DPT-DPMT). All machine knowlage in plastics processing.
Er. Naresh Dhaker
(8890881858)
(CIPET JAIPUR)
Keytech 3 d printing filament
Keytech 3D Printing filaments are made with high special polymers, mostly never use in
3D Printing till today.
These filament are made with high thermal and mechanical characteristics.
Particular attention are PolyKey PLA HS and PolyKey PLA HS NX who have a similar
thermal and mechanical characteristics of ABS and PA but are possible and easy to print
like PLA.
Others new polymers are PP (Polypropylene) Special Compound with high thermal and
mechanical characteristics better of ABS and PA, aren't biopolymers and in meantime
have also very low moisture absorption and will be to print similar PLA.
On the next page you can see a best values and points of Keytech 3D Printing Filament.
ZX Presentation. 20140110
This document provides an overview of ZX factory facilities, products, certifications, and sales footprint. It discusses the size and capacity of ZX and DP manufacturing factories. It also describes ZX and DP's engineering abilities, quality control processes, and system management departments. The document highlights ZX's history and introduces their product lines including adjustable shocks and struts, electronic remote control systems, gas-filled shock absorbers, steering dampers, twin tube shocks, strut modules, cartridges, and adjustable suspension shock absorbers. It also lists the certificates ZX has obtained and their sales footprint in over 35 countries.
Presentation wts plastic
The document discusses fuel extraction from plastic waste through a process called pyrolysis. Pyrolysis involves heating plastic waste in an oxygen-free environment to produce pyro-oil, pyro-gas, and pyro-coke. While pyrolysis can utilize plastic waste, it has disadvantages like the produced outputs having high chlorine, sulfur, and hydrocarbon content which require further processing. Due to these serious disadvantages, the authors decided to rebuild the system to use catalytic cracking instead for plastic waste processing.
Polylub gly-151-501-801 Mr Tùng - 0987 988 407 | www.khodaumo.com
This document summarizes the properties and applications of POLYLUB GLY 151, 501, and 801 lubricating greases. The greases are based on synthetic hydrocarbon oil, mineral oil, and special lithium soap. They are suitable for lubricating plastic components against metal or other plastic surfaces in applications like vehicles, gears, seals, and pneumatic equipment. The greases provide benefits such as approval by automotive manufacturers, contribution to noise reduction, and detection of lubricant with UV light.
2000 bph complete pet bottle production line cbecl
This document provides a quotation for a PET bottle production line with a capacity of 1500-2000 bottles per hour. The line includes semi-automatic blow molding and injection molding machines, as well as auxiliary equipment. The total price quoted is $52,600 CFR for delivery within 30 days with a one year warranty. Payment terms and technical specifications for the equipment are also outlined.
Injection moulding ppt
Injection moulding is a manufacturing technique for making parts from both thermoplastic and thermosetting. Plastic material in production molten plastic is injected at high pressure into a mould.
Loctite 5188 tds
LOCTITE® 5188TM is a one-part, acrylic-based anaerobic sealant that cures in the absence of air between close-fitting metal surfaces. It is designed for sealing rigid metal flanged connections, especially those exposed to minor oil contamination. It cures quickly and develops handling strength within 30 minutes, with full strength achieved after 72 hours. The sealant remains flexible even after exposure to high temperatures and has good adhesion to metals like steel and aluminum. It can seal gaps up to 0.25mm and resist pressures immediately after application while uncured.
SJ GROUP presentation-All
Shouju Industry (Group) Co., Ltd is a precision manufacturing company founded in 1987 that has since expanded to include multiple factories and offices worldwide. It provides services such as mold design and manufacturing, product R&D, precision injection molding, and engineering support. Its main business segments are automotive, packaging, and medical. Shouju aims to be a pioneer in precision manufacturing through honest business practices and mutual benefits with customers and employees. It has a large equipment portfolio and provides value-added services such as condition tracking and feedback optimization for customers.
Merkel compact seal_simko-300
Walle produce all series of hydraulic seals,according to category by purpose,including rotary seals, all kinds of O ring(FKM O ring), step seal, glyd ring, oil seal and various of combination seals, gasket, spring energised seals, food machinery seals and so on.
Injection Molding in Automotive Sector
Plastic injection molding continues to advance as new technology emerges, and with its growth comes new opportunities for using parts made with this method in automotive manufacturing. The global industry continues to work a higher percentage of plastic injection molding parts into each new round of vehicle designs, and plastic injection molding is capable of keeping up with demand.
4000 bph pet bottle production line cbecl
This document provides a quotation for a 4000BPH PET bottle production line including a semi-automatic blow molding machine and supporting equipment. The total price is $27,000 CFR for the blow molding machine, air compressor, air dryer, and mold. Payment terms include a 20% downpayment and 80% by letter of credit. The equipment will be delivered within 30 days and includes a one-year warranty on parts and labor. Installation and training can be provided on-site for $100 per day plus expenses. Detailed specifications of the blow molding machine and supporting equipment are also provided.
WAHID INDUSTRIES LIMITED
The document provides information about injection molding machines and processes. It discusses the main components of injection molding machines including the injection and clamping units. It describes the injection molding process steps and important molding parameters like temperature, stroke, time, speed and pressure. It also discusses common materials used in injection molding like thermoplastics and thermosets, and provides examples of applications for different plastic materials.
What does backpressure and wear cost you
- Extruder back pressure and wear can significantly impact output rates, product quality, and profitability. Optimizing factors like screen design and installing a system to ensure constant back pressure can increase output by thousands of pounds per day.
- Increases in back pressure force operators to increase screw speed to maintain output, but this leads to higher melt temperatures and quality issues without addressing the root cause. Maintaining constant back pressure allows running at a more efficient pressure and output range.
- Case studies show optimizations like refurbishing screws and barrels and installing a constant pressure filtration system can recover millions in lost potential output annually with payback periods of less than 30 days.
Similar to PolyPlus and enzo mb injection moulding test (20)
Poly plus and 40% pp wood pulp (injection moulding test) (gb)
Poly plus and 40% pp wood pulp (injection moulding test) (gb)
Engineered valves for plastics polymers-pe-pp industry-Guichon valves
Engineered valves for plastics polymers-pe-pp industry-Guichon valves
Vannes spéciales pour production plastiques polymers pe pp-Guichon valves
Vannes spéciales pour production plastiques polymers pe pp-Guichon valves
Polylub gly-151-501-801 Mr Tùng - 0987 988 407 | www.khodaumo.com
Polylub gly-151-501-801 Mr Tùng - 0987 988 407 | www.khodaumo.com
2000 bph complete pet bottle production line cbecl
2000 bph complete pet bottle production line cbecl
More from Stefano Corinaldesi
Ecospray ak777
This document describes an ECOSPRAY machine that nebulizes sanitizing products. It is a universal, wheeled machine that is easy to transport by vehicle. It has a 10m electrical cable, programmable timed stop, condensation tank drain valve, and dispenses sanitizing product at 0.04 l/min. Supplied accessories include an ECOSPRAY gun with 12m spiral hose, 11l tank, and 10m electrical cable. Technical features and dimensions of the machine are also provided.
Msds tek 200-uk
This document provides safety information for the product TEK 200. It identifies the product and supplier, lists the product's intended uses for degreasing and recovering pollutants, and identifies the supplier's contact information. It also classifies the product as non-hazardous according to EU regulations but hazardous according to other directives. The main ingredient is identified as a polymer-based alcohol ethoxylate. Guidelines are provided for safe handling, storage, exposure control and personal protection when working with the product.
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-prodotti-dalle-imprese-diverse-da-quelle-del-settore-sanitario
Green apple smell, dlp lcd clear resin
This single sentence document provides the name and date of a product called "GREEN APPLE SMELL, DLP/LCD CLEAR RESIN" from the company Keytech Srl dated October 5, 2019.
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
ZCORY PLUS V2 –THERMAL BARRIER -
ZCory Plus V2 is a thermal barrier coating that provides protection against high temperatures. It has been tested to withstand temperatures up to 1,000°C and shields surfaces from heat for extended periods. The coating forms a ceramic layer that insulates materials from extreme heat exposure.
MSDS TGK RESIN CLEANER
This document provides safety information for a product called TGK. It contains a mixture of hydrocarbons and 2-butoxyethanol. The product is classified as hazardous and can cause skin and eye irritation. It may be fatal if swallowed and enters airways. Exposure controls are outlined, including the use of protective gloves, clothing, goggles and respiratory protection. Information on toxicological effects and environmental hazards are also included.
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved with not dangerous and not flammable stripper
TEK 1960 MSDS EN
TEK 1960 MSDS EN
http://www.zcory.com/prodotto/solvente-non-pericoloso-per-resine-liquide-viscose-tek1960/
MSDS TEK1969_EN_1
This safety data sheet provides information on a product called TEK 1969. It identifies the product and company details, lists the product's hazards and classifications, and provides guidance on handling, storage, disposal, transportation, and other safety information. The product contains a polymer based alcohol ethoxylate and is classified as non-hazardous but requires a safety data sheet under European regulations.
More from Stefano Corinaldesi (20)
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
Covid19 la-gestione-dei-rifiuti-rappresentati-da-dpi-mascherine-guanti-ecc-pr...
First worldwide PBT filament food contact approved
First worldwide PBT filament food contact approved
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
MSDS TGK ODORLESS AND NOT FLAMMABLE SOLVENT FOR FORMLAB RESIN AND SIMILAR
Trasparent paint removed from carbon sheet autoclaved
Trasparent paint removed from carbon sheet autoclaved
Recently uploaded
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Infrastructure Challenges in Scaling RAG with Custom AI models
Building Retrieval-Augmented Generation (RAG) systems with open-source and custom AI models is a complex task. This talk explores the challenges in productionizing RAG systems, including retrieval performance, response synthesis, and evaluation. We’ll discuss how to leverage open-source models like text embeddings, language models, and custom fine-tuned models to enhance RAG performance. Additionally, we’ll cover how BentoML can help orchestrate and scale these AI components efficiently, ensuring seamless deployment and management of RAG systems in the cloud.
Presentation of the OECD Artificial Intelligence Review of Germany
Consult the full report at https://www.oecd.org/digital/oecd-artificial-intelligence-review-of-germany-609808d6-en.htm
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
“I’m still / I’m still / Chaining from the Block”
“An Outlook of the Ongoing and Future Relationship between Blockchain Technologies and Process-aware Information Systems.” Invited talk at the joint workshop on Blockchain for Information Systems (BC4IS) and Blockchain for Trusted Data Sharing (B4TDS), co-located with with the 36th International Conference on Advanced Information Systems Engineering (CAiSE), 3 June 2024, Limassol, Cyprus.
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Sudheer Mechineni, Head of Application Frameworks, Standard Chartered Bank
Discover how Standard Chartered Bank harnessed the power of Neo4j to transform complex data access challenges into a dynamic, scalable graph database solution. This keynote will cover their journey from initial adoption to deploying a fully automated, enterprise-grade causal cluster, highlighting key strategies for modelling organisational changes and ensuring robust disaster recovery. Learn how these innovations have not only enhanced Standard Chartered Bank’s data infrastructure but also positioned them as pioneers in the banking sector’s adoption of graph technology.
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Recently uploaded (20)
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Infrastructure Challenges in Scaling RAG with Custom AI models
Infrastructure Challenges in Scaling RAG with Custom AI models
Presentation of the OECD Artificial Intelligence Review of Germany
Presentation of the OECD Artificial Intelligence Review of Germany
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
GraphSummit Singapore | Graphing Success: Revolutionising Organisational Stru...
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
PolyPlus and enzo mb injection moulding test
- 1. PolyPlus and Enzo MB Injection Moulding Test 16.04.12 © Copyright Keytech S.r.l. confidential documents, unauthorized copying
- 2. Rev 1/23/07 Introducing © Copyright Keytech S.r.l. • Photo of Plastic Product • Description of Mould and Machine • Temperatures Injection Test • Other confidential documents, unauthorized copying
- 3. Rev 1/23/07 Photo of Plastic Product © Copyright Keytech S.r.l. Weight part: 45 grams Gross Capacity: 600 ml Photo only for didactically using reproduction prohibited confidential documents, unauthorized copying 100% Enzo MB
- 4. Rev 1/23/07 Description of Mould and Machine © Copyright Keytech S.r.l. Mould 12 cavity knives and 12 cavity forks (Polypropylene Copolymer) 4 grams knives and 4,6 grams forks Hot Runners and Manifold Injection Machine 300 Ton hydraulic (no accumulator version) Automatically Cycle with Robot (19 second) confidential documents, unauthorized copying
- 5. Rev 1/23/07 © Copyright Keytech S.r.l. confidential documents, unauthorized copying Temperature Profile
- 6. Rev 1/23/07 Other © Copyright Keytech S.r.l. - No decreasing productivity respect to standard process - Melting temperature of the polymer more 40 ° C in less than standard - Reduction Electric power consumption - No dimensional changes - No mechanical variations - parts ok after boiling in water for 10 minutes - parts ok after washing in the dishwasher - weight parts 15% less than Biopolymer The information contained herein is provided for information purposes and therefore did not value of formal guarantee confidential documents, unauthorized copying