Anti – fungus paint
Chemical Resistant
paint
Comparison of Anti – fungus
and
Chemical Resistant paints
Two type of paint
in the industries
In other words can be known as mold resistance
It is apply on moisture place such as bathroom, basement
and kitchen
It contain anti microbial ingredients
Introduction :
Suitable for interior painting
Fungus resistance
Low odour, when freshly paint
Type of Anti – fungus paints :
Water resistance
can be easily remove dirt and stains
can covering hairline cracks
 To prevent mold and fungal growth
 Contain biocides or mildewcides to
exterior coatings to prevent fungus
growing
Antimicrobial Coatings
Type of Anti – fungus paints :
Prevent the growth of mold
Excellent longevity
Superior moisture prevention
Provides protection from water
penetration
Mold Resistant Coatings
A paint system that is applied to a surface for
protection against attack by aggressive substances
A coating which retain its characteristics under
various degrees of chemical exposure
Introduction :
Easier Clean-up
Increase Durability
Chemical Resistance
Corrosion Resistance
Abrasion Resistance
Increase Durability
Lubricating Properties
Capability :
 Air drying single coating
 Lower level of protection against chemical attack
 Rely on solvent’s evaporation to leave a resin film
 Two component reactive systems
 Greater chemical resistant
 Rely on cross-linking process of molecular strands to
form their structure
Categories :
 Epoxy resins
 Commonly used for floor coatings and screeds
 Resistance against aqueous acids and alkalis, fats, oils, general
fuels, lubricants, salt and sugar solution
 Susceptible at higher temperatures
 Example: Resucoat HB, Sikagard 63N, Nitocote EP410, and etc.
 Polyurethane resins
 Commonly used for durable floor coatings and screeds
 Resistance against organic acids and alkalis, fuel and hydraulic
oils, and aromatic and aliphatic solvents
 Greater resistance than epoxy resins at elevated temperatures
 Example: Resutile, Resudeck, Resupen, and etc.
Types of Chemical Resistant Paint :
 Methacrylates
 Used as durable coatings offering good resistance to
aqueous solution but can be poor against solvents of
all types.
 Vinyl Esters
 Used mainly for bund and tank lining offering
excellent chemical resistance for almost all chemicals
 However, they require specialist expertise in
application
Types of Chemical Resistant Paint :
Nature of
the
medium
Concentration
of the medium
Temperature
Degree of
exposure
Length of
time of
exposure
Factors affecting performance of Chemical Resistant Paint :
Anti Fungus paint Chemical Resistant paint
Used in areas like attics, basements,
crawl spaces, and bathrooms
Used in areas like decorative floors
Paint system to remove mold and
repairing mold-related damage on the
walls
Paint system that is applied to a
surface to protect from attack by an
aggressive substance
Paints contain antimicrobial
ingredients that help prevent the
growth of mold on painted surfaces
Paints contain acidic chemical agent
that help to reduce the agrressive
substance
Examples are Rust-Oleum 2774
Zinsser Interior EggShell, Perma
White and Supreme Chemicals MC-2
Mildewcide Paint Additive 10 Gram
Examples are Sika® Fastflor® CR
Solvent-Free, Chemical-Resistant, Fast-
Cure, Epoxy Floor Coating and
Sikafloor® 381
Highly Resistant, Epoxy Novolac
Binder
 Example
of Anti-
Fungus paint
 Example of
Chemical
Resistant paint
Fungus attack on woods Before and after applying the paint for
prevention of chemicals
Anti – fungus paint
• To prevent wall gets
mold
Chemical resistant paint
• To resists chemical
intrusion
Paints

Paints

  • 1.
    Anti – funguspaint Chemical Resistant paint Comparison of Anti – fungus and Chemical Resistant paints Two type of paint in the industries
  • 2.
    In other wordscan be known as mold resistance It is apply on moisture place such as bathroom, basement and kitchen It contain anti microbial ingredients Introduction :
  • 3.
    Suitable for interiorpainting Fungus resistance Low odour, when freshly paint Type of Anti – fungus paints : Water resistance can be easily remove dirt and stains can covering hairline cracks
  • 4.
     To preventmold and fungal growth  Contain biocides or mildewcides to exterior coatings to prevent fungus growing Antimicrobial Coatings Type of Anti – fungus paints : Prevent the growth of mold Excellent longevity Superior moisture prevention Provides protection from water penetration Mold Resistant Coatings
  • 5.
    A paint systemthat is applied to a surface for protection against attack by aggressive substances A coating which retain its characteristics under various degrees of chemical exposure Introduction :
  • 6.
    Easier Clean-up Increase Durability ChemicalResistance Corrosion Resistance Abrasion Resistance Increase Durability Lubricating Properties Capability :
  • 7.
     Air dryingsingle coating  Lower level of protection against chemical attack  Rely on solvent’s evaporation to leave a resin film  Two component reactive systems  Greater chemical resistant  Rely on cross-linking process of molecular strands to form their structure Categories :
  • 8.
     Epoxy resins Commonly used for floor coatings and screeds  Resistance against aqueous acids and alkalis, fats, oils, general fuels, lubricants, salt and sugar solution  Susceptible at higher temperatures  Example: Resucoat HB, Sikagard 63N, Nitocote EP410, and etc.  Polyurethane resins  Commonly used for durable floor coatings and screeds  Resistance against organic acids and alkalis, fuel and hydraulic oils, and aromatic and aliphatic solvents  Greater resistance than epoxy resins at elevated temperatures  Example: Resutile, Resudeck, Resupen, and etc. Types of Chemical Resistant Paint :
  • 9.
     Methacrylates  Usedas durable coatings offering good resistance to aqueous solution but can be poor against solvents of all types.  Vinyl Esters  Used mainly for bund and tank lining offering excellent chemical resistance for almost all chemicals  However, they require specialist expertise in application Types of Chemical Resistant Paint :
  • 10.
    Nature of the medium Concentration of themedium Temperature Degree of exposure Length of time of exposure Factors affecting performance of Chemical Resistant Paint :
  • 11.
    Anti Fungus paintChemical Resistant paint Used in areas like attics, basements, crawl spaces, and bathrooms Used in areas like decorative floors Paint system to remove mold and repairing mold-related damage on the walls Paint system that is applied to a surface to protect from attack by an aggressive substance Paints contain antimicrobial ingredients that help prevent the growth of mold on painted surfaces Paints contain acidic chemical agent that help to reduce the agrressive substance Examples are Rust-Oleum 2774 Zinsser Interior EggShell, Perma White and Supreme Chemicals MC-2 Mildewcide Paint Additive 10 Gram Examples are Sika® Fastflor® CR Solvent-Free, Chemical-Resistant, Fast- Cure, Epoxy Floor Coating and Sikafloor® 381 Highly Resistant, Epoxy Novolac Binder
  • 12.
     Example of Anti- Funguspaint  Example of Chemical Resistant paint Fungus attack on woods Before and after applying the paint for prevention of chemicals
  • 13.
    Anti – funguspaint • To prevent wall gets mold Chemical resistant paint • To resists chemical intrusion