Outdoor drone jammer user manual
•
1 like•385 views
This document is a user manual for the CT-3076-HGA anti-drone jamming system with a higher gain antenna. It outputs power across six frequency bands to prevent drone UAVs. The manual provides safety guidelines for handling and using the device, as well as instructions for opening the case, connecting the antennas to the corresponding channels, and powering it on by connecting the AC power cord and setting the output power switches to maximum levels.
Report
Share
Report
Share
Download to read offline
Recommended
Drone jammer user manual
This user manual provides instructions for operating a Pelican jamming system model CT-6067. It outputs between 15-100W on each of six frequency bands between 1570-1620MHz, 2400-2500MHz, 433MHz, 5700-5900MHz, 865-920MHz, and 1220-1260MHz. Safety guidelines warn to follow all instructions, handle it carefully due to heat dissipation, and only allow qualified service. It features omni-directional antennas, power input from 110V or 220V AC, and LED indicators of conditions. Quick installation involves connecting corresponding antennas to channels and turning the main power and each band power to maximum output. An external battery can also power the jam
Man pack Drone UAV jammer 15-25w
This document describes a 5-band directional antenna for jamming drones. It has 4 bands in one directional antenna that operate at different frequencies and polarizations for WiFi, Bluetooth, GPS/GLONASS. It also has an omni antenna for another WiFi band. The total output power is 115W with a battery operating time of 1-2 hours. Optional additional frequency bands are available. It is designed to jam commercial drones within a 400-1000 meter radius.
Drone uav jammers systems by jammers4u 2016
This document describes several drone jamming devices with different frequency bands and power outputs. The CT-2080B is an 8 band briefcase jammer with a total power of 16W and a range of 50-200 meters. The CT-3060N-UAV is a more powerful 6 band jammer with a total power of 127W and range of 300-600 meters. The CT-3077B-UAV is a 7 band built-in battery jammer with total power of 172W and range of 300-800 meters.
Drone Jammer
This document provides specifications for the CT-3076B-UAV 6 Band anti-drone jammer. It can jam signals across 6 bands including 433MHz, 868-915MHz, 2.4-2.5GHz WiFi, GPS, and 5.7-5.9GHz WiFi, with a total power of 142W. It has an adjustable power output for each band and channel. The jammer has a battery that provides 1 hour of use, measures 500 x 305 x 457 mm, and weighs 26kg. It comes in a Pelican case and has an operating range of 400-1000 meters.
Pegasus2000
The document describes a PEGASUS 2000 module with 16MB flash memory, 64MB RAM, and two attached HORUS2000 modules. It has Ethernet, USB, and JTAG ports and various voltage regulators and clock sources. It includes a 1Mbit F-RAM, inertial sensor, and a baseband processor compatible with Xilinx Virtex-5 FPGAs. It has 4 push buttons, 8 dip switches, and 8 LEDs for input and output.
CT -6081QD WIFI 2.4ghz 5ghz RC quadcopters drones 6 bands 250w jammer up to 1...
CT -6081QD WIFI 2.4ghz 5ghz RC quadcopters drones 6 bands 250w jammer up to 1...Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
CT -6081QD WIFI 2.4ghz 5ghz RC quadcopters drones 6 bands 250w jammer up to 1500m www/.jammers4u.comLista De Equipamentos Novos !! Clientes
This document lists radio equipment and prices from Icom, Yaesu, Kenwood, and Voyager. It provides contact information for the seller and notes that items ordered may take 1-2 weeks for delivery. Payment is required up front and there is a 10% fee for pre-orders to reserve items.
Iot 임xx,오xx,이xx(블루링크스마트컨트롤,스마트안전모,ddp+체온에너지기반웨어러블디바이스)
This document compares ZigBee and Z-Wave wireless communication standards. Both use the 2.4GHz band and have transmission distances over 100m. ZigBee uses BPSK and OPQPSK modulation while Z-Wave uses GFSK. ZigBee supports up to 65,536 nodes while Z-Wave supports up to 232 nodes. Both standards have similar power consumption profiles of around 1uA when idle, 20mA for receiving, and 40mA for transmitting.
Recommended
Drone jammer user manual
This user manual provides instructions for operating a Pelican jamming system model CT-6067. It outputs between 15-100W on each of six frequency bands between 1570-1620MHz, 2400-2500MHz, 433MHz, 5700-5900MHz, 865-920MHz, and 1220-1260MHz. Safety guidelines warn to follow all instructions, handle it carefully due to heat dissipation, and only allow qualified service. It features omni-directional antennas, power input from 110V or 220V AC, and LED indicators of conditions. Quick installation involves connecting corresponding antennas to channels and turning the main power and each band power to maximum output. An external battery can also power the jam
Man pack Drone UAV jammer 15-25w
This document describes a 5-band directional antenna for jamming drones. It has 4 bands in one directional antenna that operate at different frequencies and polarizations for WiFi, Bluetooth, GPS/GLONASS. It also has an omni antenna for another WiFi band. The total output power is 115W with a battery operating time of 1-2 hours. Optional additional frequency bands are available. It is designed to jam commercial drones within a 400-1000 meter radius.
Drone uav jammers systems by jammers4u 2016
This document describes several drone jamming devices with different frequency bands and power outputs. The CT-2080B is an 8 band briefcase jammer with a total power of 16W and a range of 50-200 meters. The CT-3060N-UAV is a more powerful 6 band jammer with a total power of 127W and range of 300-600 meters. The CT-3077B-UAV is a 7 band built-in battery jammer with total power of 172W and range of 300-800 meters.
Drone Jammer
This document provides specifications for the CT-3076B-UAV 6 Band anti-drone jammer. It can jam signals across 6 bands including 433MHz, 868-915MHz, 2.4-2.5GHz WiFi, GPS, and 5.7-5.9GHz WiFi, with a total power of 142W. It has an adjustable power output for each band and channel. The jammer has a battery that provides 1 hour of use, measures 500 x 305 x 457 mm, and weighs 26kg. It comes in a Pelican case and has an operating range of 400-1000 meters.
Pegasus2000
The document describes a PEGASUS 2000 module with 16MB flash memory, 64MB RAM, and two attached HORUS2000 modules. It has Ethernet, USB, and JTAG ports and various voltage regulators and clock sources. It includes a 1Mbit F-RAM, inertial sensor, and a baseband processor compatible with Xilinx Virtex-5 FPGAs. It has 4 push buttons, 8 dip switches, and 8 LEDs for input and output.
CT -6081QD WIFI 2.4ghz 5ghz RC quadcopters drones 6 bands 250w jammer up to 1...
CT -6081QD WIFI 2.4ghz 5ghz RC quadcopters drones 6 bands 250w jammer up to 1...Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
CT -6081QD WIFI 2.4ghz 5ghz RC quadcopters drones 6 bands 250w jammer up to 1500m www/.jammers4u.comLista De Equipamentos Novos !! Clientes
This document lists radio equipment and prices from Icom, Yaesu, Kenwood, and Voyager. It provides contact information for the seller and notes that items ordered may take 1-2 weeks for delivery. Payment is required up front and there is a 10% fee for pre-orders to reserve items.
Iot 임xx,오xx,이xx(블루링크스마트컨트롤,스마트안전모,ddp+체온에너지기반웨어러블디바이스)
This document compares ZigBee and Z-Wave wireless communication standards. Both use the 2.4GHz band and have transmission distances over 100m. ZigBee uses BPSK and OPQPSK modulation while Z-Wave uses GFSK. ZigBee supports up to 65,536 nodes while Z-Wave supports up to 232 nodes. Both standards have similar power consumption profiles of around 1uA when idle, 20mA for receiving, and 40mA for transmitting.
ABB PVI
This document summarizes solar inverters from ABB, specifically models PVI-10.0/12.0-I-OUTD. These are three-phase inverters for commercial PV installations rated at 10-12 kW with efficiencies up to 97.3%. Key features include independent MPPT for each input, outdoor enclosures, monitoring capabilities, and compliance with various international grid standards. Technical specifications include input/output voltage and current ratings, dimensions, weight, and certifications.
WIFI 3 PHASE STARTER MOTOR REMOTE
Product description
You can switch ON /OFF the starter motor in Wi-Fi range.
It will support all type of DOL and Start Delta starter.
We can operate by the system by remote and manual.
It will support all type starter and HP range.
We can read the status of starter ON/ OFF.
Support 3 phase and single phase
Operating voltage 230V AC/50 HZ
Growatt 2500 - 5500
The document describes Growatt's MTL-S series of solar inverters, which feature double MPPT tracking, efficiencies up to 97.9%, a transformerless design, and support for various communication methods. The series includes models ranging from 2500W to 5500W and comply with various international safety regulations. They have IP65 ratings, operate from -25°C to 60°C, and come with a 5-year standard warranty.
Bfdx handheld transceiver bf 5118 walky talky
The BFDX handheld transceiver BF-5118 walky talky has a frequency range between 140-470 MHz, supports up to 100 channels spaced at 25 kHz, and can operate between -20°C and +60°C. It has a dimensions of 58x31x102 mm, weighs 193g including the battery, and is powered by a 700mAh Ni-MH battery pack. The transmitter has a power output of ≤3W while the receiver has a sensitivity of ≤0.165μV.
Jammers for Convoy protection
The document summarizes a vehicle-mounted jammer system meant to block remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can operate in sweep, spot, or open communication modes and provides 360-degree protection within a 200-400 meter range, making it suitable for special military, police, and VIP protection operations.
1804 car vip protection
The document describes a vehicle-mounted jammer system designed to block remote-controlled improvised explosive devices. The system uses 1360 watts of power across 17 modules to sweep frequencies from 20 MHz to 3000 MHz. It has three operating modes and allows open communication windows. The jammer is intended to provide security for special military, police, and VIP protection units.
1804 car vip protection
The document describes a vehicle-mounted jammer system meant to block signals from remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can be configured for different applications and provides 360-degree protection through broadband omni-directional antennas.
H280 specification-www.ttbvs.com
The document summarizes the specifications and features of the H280 portable two-way radio. It lists the following key features: supports military standard MIL-STD-810 for durability, IP54 water and dust resistance rating, 1300mAh high capacity battery providing over 11 hours of use, and 16 channel capacity. The radio has a frequency range of 136-480MHz, supports 25/12.5KHz channel spacing, and has a transmit power output of 4W/2W depending on frequency band. It is 102mmx51.5mmx28.5mm in size and weighs 220g with antenna and battery installed.
Uno 2.0kW
The document describes the UNO-2.0-I-OUTD and UNO-2.5-I-OUTD single phase string inverters from Aurora. The inverters feature high efficiency of up to 96.3%, wide input voltage ranges, outdoor enclosures, communication interfaces, and MPPT for improved energy harvesting. They are designed for average rooftop solar installations and can withstand harsh environmental conditions.
bosch mw1-rx-f6
The document describes Bosch's UHF wireless handheld microphones. The microphones operate on UHF frequencies between 606-746 MHz or 925-937 MHz depending on the model. They have a battery life of approximately 15 hours and include features like selectable channels and a LCD display. The microphones are part of Bosch's wireless microphone system and can be used with separate microphone receivers and transmitter accessories.
LV live feeder and phase identifier
Al Buraq Electric & Tools L.L.C ---- Your All in One Destination
In 2004, when Al Buraq Hardware & Tools was started as a small family-owned business, we made a commitment to provide working people with great quality tools at the lowest prices. And for over 10 years, Al Buraq Hardware & Tools has done just that. From hand tools and generators, to air and power tools, from shop equipment to automotive tools, Al Buraq offers more than 20,000 tools and accessories at quality levels that match or exceed competing brands.
We buy directly from the factories and we sell directly to you to enjoy the savings and the very high quality standards products.
Now Al Buraq Hardware & Tools L.L.C in the UAE is following the guidance of HH Sheikh Mohamed Bin Rashed Al Maktoom to move Dubai Government to a smart Government we decided to have our E-SHOWROOM where the client can enjoy preparing the LPO directly from our website using his username and password.
What do we have in our E-SHOWROOM?
- Electrical Safety Products: industrial safety helmet for linemen, safety helmet for linemen with short visor, safety helmet with integrated face screen for electricians, Electrician face shield with headband and brow-guard, Arc-Flash protective face shield, helmet for use in the forestry industry, safety cap, glasses, headgears, safety shoes, safety boots, insulating mats, work gears, high-visibility garments, rain protection, climbing equipment, harnesses, energy absorbers, fall arresters, anchorage, connectors, lanyards, sets, rescue devices, latex gloves, composite chlorinated gloves, leather gloves, handling leather gloves, preliminary identification of cables and phases, no-voltage testing / absence of voltage testing, earthing and short-circuiting, earthing stickes, insulating tools 1000 V, cable cutters, shunt, repowering, network controlling and measuring equipment, substation equipment, (FAMECA, Sibille Safe, Jegou industries, Technowill)
sales@alburaqtools.ae
LV live cable identifier
Al Buraq Electric & Tools L.L.C ---- Your All in One Destination
In 2004, when Al Buraq Hardware & Tools was started as a small family-owned business, we made a commitment to provide working people with great quality tools at the lowest prices. And for over 10 years, Al Buraq Hardware & Tools has done just that. From hand tools and generators, to air and power tools, from shop equipment to automotive tools, Al Buraq offers more than 20,000 tools and accessories at quality levels that match or exceed competing brands.
We buy directly from the factories and we sell directly to you to enjoy the savings and the very high quality standards products.
Now Al Buraq Hardware & Tools L.L.C in the UAE is following the guidance of HH Sheikh Mohamed Bin Rashed Al Maktoom to move Dubai Government to a smart Government we decided to have our E-SHOWROOM where the client can enjoy preparing the LPO directly from our website using his username and password.
What do we have in our E-SHOWROOM?
- Electrical Safety Products: industrial safety helmet for linemen, safety helmet for linemen with short visor, safety helmet with integrated face screen for electricians, Electrician face shield with headband and brow-guard, Arc-Flash protective face shield, helmet for use in the forestry industry, safety cap, glasses, headgears, safety shoes, safety boots, insulating mats, work gears, high-visibility garments, rain protection, climbing equipment, harnesses, energy absorbers, fall arresters, anchorage, connectors, lanyards, sets, rescue devices, latex gloves, composite chlorinated gloves, leather gloves, handling leather gloves, preliminary identification of cables and phases, no-voltage testing / absence of voltage testing, earthing and short-circuiting, earthing stickes, insulating tools 1000 V, cable cutters, shunt, repowering, network controlling and measuring equipment, substation equipment, (FAMECA, Sibille Safe, Jegou industries, Technowill)
sales@alburaqtools.ae
TGR65-brief-150403-BJ
The document provides information about the TGR-65 portable medium wave antenna system. It can be transported by vehicle and set up by a 4 person crew in under an hour. It operates from 500 kHz to 1710 kHz and can be tuned in the field. The system includes the antenna, tuning unit, guy lines, and weighs approximately 760 pounds total. It requires a 100 foot diameter flat area for installation and can withstand winds up to 70 mph.
Aurora Medium
The document describes the Aurora Trio inverters, including the PVI-6.0-TL and PVI-8.0-TL models. It provides specifications for their key features such as having two independent MPPTs, wide input voltage ranges, high efficiencies, monitoring interfaces, and compliance with various international grid standards. The inverters are designed for outdoor rooftop solar installations and come in variants with and without DC disconnect switches.
Bang gia surge arrester_pulse_relay_timer_switch_schneider_2012
The document provides pricing information for modular contactors and related accessories. It lists contactors for single-phase, two-phase, three-phase, and four-phase circuits from 16A to 100A and with coil voltages of 24V or 230/240VAC. Accessories include spacers and impulse relays. Application areas mentioned are motor, heating, lighting, and industrial control. The pricing is in Vietnamese dong and includes VAT.
POSITECH GSM Fixed Wireless Terminal
Positech Solutions manufactures and supplies GSM FCT products using modern techniques and high quality components. Their GSM FCT offers dynamic echo cancellation, high gain antennas, and easy connections. It provides immediate telephone access, supports multiple users, and can add extra lines quickly. Key features include GSM 900 and 1800 compatibility, a 2 watt transmit power in both bands, and operating in temperatures from -10C to 50C.
Kannad 406 ap
The Kannad 406 AP is an automatic portable emergency locator transmitter (ELT) that operates on three frequencies and offers advantages over conventional two-frequency ELTs including global coverage through multiple satellites, precise location pinpointing, and identification of aircraft in distress. It can be installed near the tail of an aircraft and activated automatically in a crash or manually. When removed from its bracket, it functions as a portable survival beacon. Programming is quick and maintenance is limited to monthly self-tests.
Wifi the good bad and ugly
This document discusses wireless networking and WiFi protocols. It provides an overview of radio frequency, WiFi standards like 802.11g, different types of radio antennas, factors that impact WiFi signals, and WiFi protocols such as 802.11a/b/g/n/ac. It also covers OpenWRT configuration options for wireless settings including bitrate, transmit power, beacon settings, and channel bandwidth.
chen515_454_termpaper
3D printing technology, also known as additive manufacturing, builds objects layer by layer under computer control. It is increasingly being used in the aerospace industry to produce complex parts. While 3D printing allows greater design flexibility and lower costs than traditional manufacturing, wider adoption is limited by issues like speed of production and reliability testing of printed parts. Future advances may enable on-demand printing of replacement parts in space and the mass production of entire aircraft structures with 3D printing.
Ct-3076b-uav high power anti-drone pelican jammer
Ct-3076b-uav high power anti-drone pelican jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
This document provides specifications for the CT-3076B-UAV 6 Band anti-drone jammer. It can jam signals across 6 bands including 433MHz, 868-915MHz, 2.4-2.5GHz WiFi, GPS, and 5.7-5.9GHz WiFi, with a total power of 142W. It has an adjustable power output for each band and channel. The jammer has a battery that provides 1 hour of use, measures 500 x 305 x 457 mm, and weighs 26kg. It comes in a Pelican case and has an operating range of 400-1000 meters.Teknologi anti drone untuk objek vital nasional di Indonesia
Dokumen tersebut memberikan informasi mengenai teknologi anti drone untuk pengamanan instalasi negara seperti Istana Kepresidenan. Teknologi ini dapat mendeteksi dan menangani drone yang mendekati area terlarang untuk mencegah ancaman terorisme dan penyadapan.
GAO Asset Tracking System: know where your assets are at all times!
The GAO RFID Asset Tracking System is a fully integrated asset locating solution that tracks and monitors assets in real-time. The system is powered by three key components: GAO Asset Tracking Software, GAO RFID Tags, GAO RFID Readers. These three components work together to track assets globally or locally, and can be customized to address the needs of any business environment. In three simple steps, the GAO Asset Tracking System empowers you to know exactly where your assets are on demand.
More Related Content
What's hot
ABB PVI
This document summarizes solar inverters from ABB, specifically models PVI-10.0/12.0-I-OUTD. These are three-phase inverters for commercial PV installations rated at 10-12 kW with efficiencies up to 97.3%. Key features include independent MPPT for each input, outdoor enclosures, monitoring capabilities, and compliance with various international grid standards. Technical specifications include input/output voltage and current ratings, dimensions, weight, and certifications.
WIFI 3 PHASE STARTER MOTOR REMOTE
Product description
You can switch ON /OFF the starter motor in Wi-Fi range.
It will support all type of DOL and Start Delta starter.
We can operate by the system by remote and manual.
It will support all type starter and HP range.
We can read the status of starter ON/ OFF.
Support 3 phase and single phase
Operating voltage 230V AC/50 HZ
Growatt 2500 - 5500
The document describes Growatt's MTL-S series of solar inverters, which feature double MPPT tracking, efficiencies up to 97.9%, a transformerless design, and support for various communication methods. The series includes models ranging from 2500W to 5500W and comply with various international safety regulations. They have IP65 ratings, operate from -25°C to 60°C, and come with a 5-year standard warranty.
Bfdx handheld transceiver bf 5118 walky talky
The BFDX handheld transceiver BF-5118 walky talky has a frequency range between 140-470 MHz, supports up to 100 channels spaced at 25 kHz, and can operate between -20°C and +60°C. It has a dimensions of 58x31x102 mm, weighs 193g including the battery, and is powered by a 700mAh Ni-MH battery pack. The transmitter has a power output of ≤3W while the receiver has a sensitivity of ≤0.165μV.
Jammers for Convoy protection
The document summarizes a vehicle-mounted jammer system meant to block remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can operate in sweep, spot, or open communication modes and provides 360-degree protection within a 200-400 meter range, making it suitable for special military, police, and VIP protection operations.
1804 car vip protection
The document describes a vehicle-mounted jammer system designed to block remote-controlled improvised explosive devices. The system uses 1360 watts of power across 17 modules to sweep frequencies from 20 MHz to 3000 MHz. It has three operating modes and allows open communication windows. The jammer is intended to provide security for special military, police, and VIP protection units.
1804 car vip protection
The document describes a vehicle-mounted jammer system meant to block signals from remote-controlled improvised explosive devices. It has a very high output power of 1360 watts and uses state-of-the-art technology for maximum jamming performance across frequency bands from 20-3000 MHz. The modular system can be configured for different applications and provides 360-degree protection through broadband omni-directional antennas.
H280 specification-www.ttbvs.com
The document summarizes the specifications and features of the H280 portable two-way radio. It lists the following key features: supports military standard MIL-STD-810 for durability, IP54 water and dust resistance rating, 1300mAh high capacity battery providing over 11 hours of use, and 16 channel capacity. The radio has a frequency range of 136-480MHz, supports 25/12.5KHz channel spacing, and has a transmit power output of 4W/2W depending on frequency band. It is 102mmx51.5mmx28.5mm in size and weighs 220g with antenna and battery installed.
Uno 2.0kW
The document describes the UNO-2.0-I-OUTD and UNO-2.5-I-OUTD single phase string inverters from Aurora. The inverters feature high efficiency of up to 96.3%, wide input voltage ranges, outdoor enclosures, communication interfaces, and MPPT for improved energy harvesting. They are designed for average rooftop solar installations and can withstand harsh environmental conditions.
bosch mw1-rx-f6
The document describes Bosch's UHF wireless handheld microphones. The microphones operate on UHF frequencies between 606-746 MHz or 925-937 MHz depending on the model. They have a battery life of approximately 15 hours and include features like selectable channels and a LCD display. The microphones are part of Bosch's wireless microphone system and can be used with separate microphone receivers and transmitter accessories.
LV live feeder and phase identifier
Al Buraq Electric & Tools L.L.C ---- Your All in One Destination
In 2004, when Al Buraq Hardware & Tools was started as a small family-owned business, we made a commitment to provide working people with great quality tools at the lowest prices. And for over 10 years, Al Buraq Hardware & Tools has done just that. From hand tools and generators, to air and power tools, from shop equipment to automotive tools, Al Buraq offers more than 20,000 tools and accessories at quality levels that match or exceed competing brands.
We buy directly from the factories and we sell directly to you to enjoy the savings and the very high quality standards products.
Now Al Buraq Hardware & Tools L.L.C in the UAE is following the guidance of HH Sheikh Mohamed Bin Rashed Al Maktoom to move Dubai Government to a smart Government we decided to have our E-SHOWROOM where the client can enjoy preparing the LPO directly from our website using his username and password.
What do we have in our E-SHOWROOM?
- Electrical Safety Products: industrial safety helmet for linemen, safety helmet for linemen with short visor, safety helmet with integrated face screen for electricians, Electrician face shield with headband and brow-guard, Arc-Flash protective face shield, helmet for use in the forestry industry, safety cap, glasses, headgears, safety shoes, safety boots, insulating mats, work gears, high-visibility garments, rain protection, climbing equipment, harnesses, energy absorbers, fall arresters, anchorage, connectors, lanyards, sets, rescue devices, latex gloves, composite chlorinated gloves, leather gloves, handling leather gloves, preliminary identification of cables and phases, no-voltage testing / absence of voltage testing, earthing and short-circuiting, earthing stickes, insulating tools 1000 V, cable cutters, shunt, repowering, network controlling and measuring equipment, substation equipment, (FAMECA, Sibille Safe, Jegou industries, Technowill)
sales@alburaqtools.ae
LV live cable identifier
Al Buraq Electric & Tools L.L.C ---- Your All in One Destination
In 2004, when Al Buraq Hardware & Tools was started as a small family-owned business, we made a commitment to provide working people with great quality tools at the lowest prices. And for over 10 years, Al Buraq Hardware & Tools has done just that. From hand tools and generators, to air and power tools, from shop equipment to automotive tools, Al Buraq offers more than 20,000 tools and accessories at quality levels that match or exceed competing brands.
We buy directly from the factories and we sell directly to you to enjoy the savings and the very high quality standards products.
Now Al Buraq Hardware & Tools L.L.C in the UAE is following the guidance of HH Sheikh Mohamed Bin Rashed Al Maktoom to move Dubai Government to a smart Government we decided to have our E-SHOWROOM where the client can enjoy preparing the LPO directly from our website using his username and password.
What do we have in our E-SHOWROOM?
- Electrical Safety Products: industrial safety helmet for linemen, safety helmet for linemen with short visor, safety helmet with integrated face screen for electricians, Electrician face shield with headband and brow-guard, Arc-Flash protective face shield, helmet for use in the forestry industry, safety cap, glasses, headgears, safety shoes, safety boots, insulating mats, work gears, high-visibility garments, rain protection, climbing equipment, harnesses, energy absorbers, fall arresters, anchorage, connectors, lanyards, sets, rescue devices, latex gloves, composite chlorinated gloves, leather gloves, handling leather gloves, preliminary identification of cables and phases, no-voltage testing / absence of voltage testing, earthing and short-circuiting, earthing stickes, insulating tools 1000 V, cable cutters, shunt, repowering, network controlling and measuring equipment, substation equipment, (FAMECA, Sibille Safe, Jegou industries, Technowill)
sales@alburaqtools.ae
TGR65-brief-150403-BJ
The document provides information about the TGR-65 portable medium wave antenna system. It can be transported by vehicle and set up by a 4 person crew in under an hour. It operates from 500 kHz to 1710 kHz and can be tuned in the field. The system includes the antenna, tuning unit, guy lines, and weighs approximately 760 pounds total. It requires a 100 foot diameter flat area for installation and can withstand winds up to 70 mph.
Aurora Medium
The document describes the Aurora Trio inverters, including the PVI-6.0-TL and PVI-8.0-TL models. It provides specifications for their key features such as having two independent MPPTs, wide input voltage ranges, high efficiencies, monitoring interfaces, and compliance with various international grid standards. The inverters are designed for outdoor rooftop solar installations and come in variants with and without DC disconnect switches.
Bang gia surge arrester_pulse_relay_timer_switch_schneider_2012
The document provides pricing information for modular contactors and related accessories. It lists contactors for single-phase, two-phase, three-phase, and four-phase circuits from 16A to 100A and with coil voltages of 24V or 230/240VAC. Accessories include spacers and impulse relays. Application areas mentioned are motor, heating, lighting, and industrial control. The pricing is in Vietnamese dong and includes VAT.
POSITECH GSM Fixed Wireless Terminal
Positech Solutions manufactures and supplies GSM FCT products using modern techniques and high quality components. Their GSM FCT offers dynamic echo cancellation, high gain antennas, and easy connections. It provides immediate telephone access, supports multiple users, and can add extra lines quickly. Key features include GSM 900 and 1800 compatibility, a 2 watt transmit power in both bands, and operating in temperatures from -10C to 50C.
Kannad 406 ap
The Kannad 406 AP is an automatic portable emergency locator transmitter (ELT) that operates on three frequencies and offers advantages over conventional two-frequency ELTs including global coverage through multiple satellites, precise location pinpointing, and identification of aircraft in distress. It can be installed near the tail of an aircraft and activated automatically in a crash or manually. When removed from its bracket, it functions as a portable survival beacon. Programming is quick and maintenance is limited to monthly self-tests.
Wifi the good bad and ugly
This document discusses wireless networking and WiFi protocols. It provides an overview of radio frequency, WiFi standards like 802.11g, different types of radio antennas, factors that impact WiFi signals, and WiFi protocols such as 802.11a/b/g/n/ac. It also covers OpenWRT configuration options for wireless settings including bitrate, transmit power, beacon settings, and channel bandwidth.
What's hot (18)
Bang gia surge arrester_pulse_relay_timer_switch_schneider_2012
Bang gia surge arrester_pulse_relay_timer_switch_schneider_2012
Viewers also liked
chen515_454_termpaper
3D printing technology, also known as additive manufacturing, builds objects layer by layer under computer control. It is increasingly being used in the aerospace industry to produce complex parts. While 3D printing allows greater design flexibility and lower costs than traditional manufacturing, wider adoption is limited by issues like speed of production and reliability testing of printed parts. Future advances may enable on-demand printing of replacement parts in space and the mass production of entire aircraft structures with 3D printing.
Ct-3076b-uav high power anti-drone pelican jammer
Ct-3076b-uav high power anti-drone pelican jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
This document provides specifications for the CT-3076B-UAV 6 Band anti-drone jammer. It can jam signals across 6 bands including 433MHz, 868-915MHz, 2.4-2.5GHz WiFi, GPS, and 5.7-5.9GHz WiFi, with a total power of 142W. It has an adjustable power output for each band and channel. The jammer has a battery that provides 1 hour of use, measures 500 x 305 x 457 mm, and weighs 26kg. It comes in a Pelican case and has an operating range of 400-1000 meters.Teknologi anti drone untuk objek vital nasional di Indonesia
Dokumen tersebut memberikan informasi mengenai teknologi anti drone untuk pengamanan instalasi negara seperti Istana Kepresidenan. Teknologi ini dapat mendeteksi dan menangani drone yang mendekati area terlarang untuk mencegah ancaman terorisme dan penyadapan.
GAO Asset Tracking System: know where your assets are at all times!
The GAO RFID Asset Tracking System is a fully integrated asset locating solution that tracks and monitors assets in real-time. The system is powered by three key components: GAO Asset Tracking Software, GAO RFID Tags, GAO RFID Readers. These three components work together to track assets globally or locally, and can be customized to address the needs of any business environment. In three simple steps, the GAO Asset Tracking System empowers you to know exactly where your assets are on demand.
Teamliftss rfid based_asset_management_system
TeamLiftsS provides RFID-based asset management systems to help companies track physical assets. Their system uses RFID tags attached to assets and handheld RFID readers to record asset locations in real-time. Key features include minimizing manual data entry, easing asset transfers between owners and locations, enabling real-time asset tracking across facilities, expediting the audit process, and providing comprehensive reporting on asset status and history. The system workflow involves mapping asset information from a client's ERP to unique RFID tags, scanning tags with handheld readers to track asset movements, and editing asset details in the software database.
RFID based asset management
This document summarizes an RFID-based asset management system. It describes the hardware and software components used, including RFID tags, readers, and apps. It explains how assets are tagged at stations using desktop readers and monitored by fixed and handheld RFID readers as they move through facilities. Reports on asset locations and histories can be generated from the server. The system provides benefits like faster asset tracking, less human error, and improved security and inventory management.
Asset Tracking and Management using RFID for IT/Datacenters and Oil and Gas i...
This research was carried out as a part of my dissertation. The objective was to understand the use of RFID for asset management ranging from tracking IT assets to its uses in asset/personnel tracking in Oil and Gas industry.
I'd appreciate if you leave a comment on the slideshow. You are free to use to use the information as long as you mention the source although I would not be able to share the originals with you since it is not under my ownership alone.
Using RFID to Track Tools and Equipment
This presentation covers how organizations of all verticals can benefit from automating equipment tracking processes with RFID.
Rfid ppt
The document describes an RFID-based vehicle tracking system that uses RFID tags, readers, and a GSM module to track vehicles and prevent road accidents. The system works by placing an RFID tag on each vehicle containing its information. RFID readers placed at secure access points, toll gates, and traffic signals can read the tags and transmit location and accident data via GSM to emergency responders. The system is designed to improve fleet management, safety, and reduce operating costs.
Viewers also liked (9)
Teknologi anti drone untuk objek vital nasional di Indonesia
Teknologi anti drone untuk objek vital nasional di Indonesia
GAO Asset Tracking System: know where your assets are at all times!
GAO Asset Tracking System: know where your assets are at all times!
Asset Tracking and Management using RFID for IT/Datacenters and Oil and Gas i...
Asset Tracking and Management using RFID for IT/Datacenters and Oil and Gas i...
Similar to Outdoor drone jammer user manual
Manual ponte rolante_im-pn-tx103-a01-en
This document provides installation and operation instructions for the Panther transmitter. It includes 3 chapters:
1) The transmitter features 8 buttons and uses 3 AAA batteries. It communicates via 2.4GHz radio frequency.
2) The instructions cover starting and stopping the transmitter, registering it to a receiver, and changing settings like automatic shutdown via button combinations.
3) Safety information is provided regarding functional safety certification when used with compatible receivers, as the stop button engages safety relays to stop machine functions.
User manual-475876
1) The document provides an operating manual for the SAGA1-L10 Industrial Remote Controller made by Gain Electronic Co., Ltd. It details specifications, parts, operation instructions, troubleshooting tips, and warranty information.
2) Warranty covers defects in materials and manufacturing for one year from shipment. The buyer pays shipping to Gain for repairs, while Gain pays return shipping. The warranty excludes consumable parts and defects caused by improper installation, maintenance, modification, operation, or software/interfacing.
3) Precautions for installing the receiver include placing it as far as possible from frequency inverters and power cables to avoid interference, and mounting it on top of the electrical control box rather than inside.
spf-1g-bx40d-1550nm-1310nm-40km-bidi-fiber-optic-transceiver-151008.pdf
This document specifies the technical details of the SPF-1G-BX40D-55/31-T02#151008 transceiver module. It is a bi-directional SFP module that supports transmission distances of up to 40km over single mode fiber at data rates of 1.25Gbps or 1.0625Gbps. The module uses a 1550nm DFB laser for transmission and a 1310nm PIN photodetector for reception. It complies with relevant SFP MSA standards and provides digital diagnostic monitoring interfaces. Application areas include gigabit Ethernet, fiber channel, and optical links in switching and routing equipment.
Stahl G053 Wireless Receiver Repeater EK00 III Data Sheet
The document describes radio receivers and repeaters that use EnOcean radio technology to switch electrical consumers via radio signals from switches. The receivers come in one-channel or four-channel versions and can accept up to 10 transmitters per channel. The repeater is used to extend the radio range between switches and receivers. The devices operate at 868.3 MHz frequency and 24V voltage, have LED indicators, snap-mount on DIN rails, and comply with relevant EMC standards. Technical specifications, dimensions, and ordering information are provided.
spf-1g-bx20d-1550nm-1310nm-20km-bidifiber-optic-transceiver--151005.pdf
This document provides specifications for the SPF-1G-BX20D-55/31-T02#151005 1000BASE 20KM SFP transceiver module from Guilin GLsun Science and Tech Group Co. The module supports transmission distances of up to 20km over single mode fiber at data rates of 1.25Gbps or 1.0625Gbps using TX wavelengths of 1550nm and 1310nm. Key features include an integrated DFB laser transmitter, PIN photodiode receiver, and MCU control unit. Electrical, optical, mechanical and environmental specifications are provided along with pinout diagrams and ordering information.
spf-1g-bx40u-1310nm-1550nm-40km-bidi-fiber-optic-transceiver-151007.pdf
This document provides specifications for Guilin GLsun Science and Tech Group Co., LTD's 1000BASE TX1310nm/RX1550nm 40KM SFP Transceiver (Model SPF-1G-BX40U-T02). The transceiver supports data rates of 1.25Gbps/1.0625Gbps over single mode fiber for distances up to 40km. It consists of a 1310nm laser transmitter and 1550nm photodiode receiver in a small form-factor pluggable module compliant with relevant standards. Detailed electrical, optical, environmental and mechanical specifications are provided.
Manual danfos danehc10
This document provides information about the Danfoss Hydronic Controller 10, a Z-Wave device for controlling hot water underfloor heating systems. It can control up to 10 outputs and includes functions like pump control, heating/cooling, and individual room temperature control. The document explains how to include the controller in a Z-Wave network and configure its settings, and provides the device's technical specifications.
BlueOptics Bo31h13610d 2-4-8gbase-lw xfp transceiver 1310nm 10km singlemode l...
This document describes an XFP optical transceiver that operates at 8.5Gbps over 10km of single mode fiber at 1310nm wavelengths. It provides digital diagnostic monitoring of operating parameters like power, current and temperature. The transceiver is RoHS compliant and supports hot-plugging in XFP ports with an operating temperature range of 0-70°C commercial or -10-80°C extended.
spf-2.5g-bx80u-1490nm-1550nm-80km-bidi-fiber-optical-module-151068.pdf
This document provides specifications for a 2.5G SFP transceiver module that transmits at 1490nm and receives at 1550nm with a transmission distance of 80km. It operates at data rates of 2.5Gbps or 2.125Gbps and includes a DFB laser transmitter, APD photodiode receiver, and MCU control unit. Key features include bi-directional LC connector, hot pluggable SFP form factor, low power consumption, and digital diagnostic monitoring interface. It is compliant with SFP MSA and SFF-8472 standards.
Vibrating Fork Point Level Switch for Liquids
Trumen is one of India’s leading manufacturer, exporter supplier of Level Switches, Level Sensors, Level Indicators Level Transmitters in India, Indonesia,etc.
Trumen is a technocrat driven organization aimed at providing top-of-the-range and high quality level measurement and process control instruments. Formed by the pioneers who devoted their respective lives in development, design and delivery of solution to the problems faced in the field of level sensing and process measurements. Trumen has a fixed point agenda about "sensing matters", and each device created at Trumen is thoroughly tested to pass the quality norms set in-house, in order to give the best performance in all operating conditions.
#CapacitanceLevelTransmitter
#CementLevelSensor
#CeramicPressureTransmitter
#ceramicdiaphragmpressuretransmitter
#ceramicsensorpressuretransmitter
#Conductivitylevelswitch
#twopointlevelswitch
#levelswitchfordairy
#flyashlevelswitch
#WFIleveltransmitter
#levelsensorsupplierinindia
#FrequencySweepLevelSwitch
#SolidLevelSwitch
#vibratingforktypelevelswitchsupplierinindia
#capacitanceLevelTransmitter
#hydrostaticleveltransmitter
#hydrostaticleveltransmittersupplierinindia
#Conductivitylevelswitch
#Vibratingforkliquidlevelswitch
Vibrating Fork Point Level Switch for Liquids
Trumen is one of India’s leading manufacturer, exporter supplier of Level Switches, Level Sensors, Level Indicators Level Transmitters in India, Indonesia,etc.
Trumen is a technocrat driven organization aimed at providing top-of-the-range and high quality level measurement and process control instruments. Formed by the pioneers who devoted their respective lives in development, design and delivery of solution to the problems faced in the field of level sensing and process measurements. Trumen has a fixed point agenda about "sensing matters", and each device created at Trumen is thoroughly tested to pass the quality norms set in-house, in order to give the best performance in all operating conditions.
Address: 39, Mangal Nagar, Behind Sai Ram Plaza, Near Rajeev Gandhi Circle, AB Road, Indore, Madhya Pradesh 452001
Contact: 0731 497 2065
#CapacitanceLevelTransmitter
#CementLevelSensor
#CeramicPressureTransmitter
#ceramicdiaphragmpressuretransmitter
#ceramicsensorpressuretransmitter
#Conductivitylevelswitch
#twopointlevelswitch
#levelswitchfordairy
#flyashlevelswitch
#WFIleveltransmitter
#levelsensorsupplierinindia
#FrequencySweepLevelSwitch
#SolidLevelSwitch
#vibratingforktypelevelswitchsupplierinindia
#capacitanceLevelTransmitter
#hydrostaticleveltransmitter
#hydrostaticleveltransmittersupplierinindia
#Conductivitylevelswitch
#Vibratingforkliquidlevelswitch
#guidedwaveradarleveltransmitter
#cementlevelsensor
#LevelSwitchinIndia
LBprofibus eng
The EasyCom Com Unit forms an interface between I/O modules and a PLC, supporting up to 80 analog or 184 digital channels of communication via PROFIBUS DP. It can be configured via GSD parameters from the control system and mounted in hazardous Zone 2 or safe areas, with self-monitoring and safe state outputs in case of failures.
BlueOptics Bo66jxx680d 10gbase cwdm xfp transceiver 1471nm 1611nm 80 km singl...
BlueOptics Bo66jxx680d 10gbase cwdm xfp transceiver 1471nm 1611nm 80 km singlemode lc duplex 10 gigabit
spf-2.5g-bx40u-1310nm-1550-40km-bidi-fiber-optical-module-151066.pdf
This document provides specifications for the SPF-2.5G-BX40U-31/55-T02#151066 transceiver module. It is a bi-directional SFP module that supports transmission of 2.5Gbps or 2.125Gbps data rates over 40km of single mode fiber using 1310nm lasers for transmission and 1550nm photodiodes for reception. The module complies with relevant SFP MSA standards and provides digital diagnostic monitoring interfaces. It is offered in commercial temperature ranges of 0-70°C and industrial ranges of -40-85°C.
Ionnic Switching Systems
The document discusses several technologies for remote control and safety applications:
(1) RF remote control uses radio frequencies to transmit data without wires over long distances and through structures.
(2) The iROS rollover sensor uses an accelerometer to accurately detect if a vehicle has rolled over before shutting down electrical systems, as required by regulations.
(3) The programmable switch panel allows remote control of multiple functions through an LCD interface and CAN bus communication between devices.
Smart Implant- Fibaro- Z-Wave
This document provides an operating manual for the FIBARO Smart Implant device, which allows connecting various wired sensors to a Z-Wave network. The manual describes:
1) Main features of the device including supporting up to 6 temperature sensors and 2 each of analog, binary, and button inputs.
2) Installation instructions for connecting different sensor types like temperature, humidity, analog, binary, and buttons.
3) Instructions for adding the device to a Z-Wave network manually or via SmartStart and removing it from the network.
4) Details on the device's operation including button functions, menus, resetting, and testing.
BlueOptics Bo66hxx680d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 80km s...
BlueOptics Bo66hxx680d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 80km singlemode lc duplex 10 gigabit
CATV Optical Transmitter
CATV 1310nm 2 mW RF Optical Transmitter with high performance DFB laser, RF Automatic Gain Control, NMS, Industry standard RFoG
BlueOptics Bo66jxx640d t1-10gbase-cwdm xfp transceiver 1271nm-1451nm 40 km si...
BlueOptics Bo66jxx640d t1-10gbase-cwdm xfp transceiver 1271nm-1451nm 40 km singlemode lc-duplex 10 gigabit
spf-2.5g-bx20u-1310nm-1550nm-20km-bidi-fiber-optical-module-151064.pdf
This document provides specifications for a 2.5G SFP transceiver module that transmits at 1310nm and receives at 1550nm with a transmission distance of 20km. It operates at data rates of 2.5Gbps or 2.125Gbps and includes digital diagnostic monitoring. Key features include a DFB laser transmitter, TIA receiver, and compliance with SFP MSA standards. It is offered in commercial and industrial temperature ranges.
Similar to Outdoor drone jammer user manual (20)
spf-1g-bx40d-1550nm-1310nm-40km-bidi-fiber-optic-transceiver-151008.pdf
spf-1g-bx40d-1550nm-1310nm-40km-bidi-fiber-optic-transceiver-151008.pdf
Stahl G053 Wireless Receiver Repeater EK00 III Data Sheet
Stahl G053 Wireless Receiver Repeater EK00 III Data Sheet
spf-1g-bx20d-1550nm-1310nm-20km-bidifiber-optic-transceiver--151005.pdf
spf-1g-bx20d-1550nm-1310nm-20km-bidifiber-optic-transceiver--151005.pdf
spf-1g-bx40u-1310nm-1550nm-40km-bidi-fiber-optic-transceiver-151007.pdf
spf-1g-bx40u-1310nm-1550nm-40km-bidi-fiber-optic-transceiver-151007.pdf
BlueOptics Bo31h13610d 2-4-8gbase-lw xfp transceiver 1310nm 10km singlemode l...
BlueOptics Bo31h13610d 2-4-8gbase-lw xfp transceiver 1310nm 10km singlemode l...
spf-2.5g-bx80u-1490nm-1550nm-80km-bidi-fiber-optical-module-151068.pdf
spf-2.5g-bx80u-1490nm-1550nm-80km-bidi-fiber-optical-module-151068.pdf
BlueOptics Bo66jxx680d 10gbase cwdm xfp transceiver 1471nm 1611nm 80 km singl...
BlueOptics Bo66jxx680d 10gbase cwdm xfp transceiver 1471nm 1611nm 80 km singl...
spf-2.5g-bx40u-1310nm-1550-40km-bidi-fiber-optical-module-151066.pdf
spf-2.5g-bx40u-1310nm-1550-40km-bidi-fiber-optical-module-151066.pdf
BlueOptics Bo66hxx680d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 80km s...
BlueOptics Bo66hxx680d 2-4-8gbase-cwdm xfp transceiver 1471nm - 1611nm 80km s...
BlueOptics Bo66jxx640d t1-10gbase-cwdm xfp transceiver 1271nm-1451nm 40 km si...
BlueOptics Bo66jxx640d t1-10gbase-cwdm xfp transceiver 1271nm-1451nm 40 km si...
spf-2.5g-bx20u-1310nm-1550nm-20km-bidi-fiber-optical-module-151064.pdf
spf-2.5g-bx20u-1310nm-1550nm-20km-bidi-fiber-optical-module-151064.pdf
More from Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
Jamaxpro 5G 21 Antenna 21w handheld mobile phone wif gps lojack jammer
Jamaxpro 5G 21 Antenna 21w handheld mobile phone wif gps lojack jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
Jamaxpro 5G 21 Antenna 21w handheld mobile phone wif gps lojack jammer http://www.jammers4u.com
#jammer #jammers #5gJammer #rfJammer #21antennajammer #rf #Rc #gpsCt-2020 20 bands 5 g mobile phone wif gps uhf vhf jammer
Ct-2020 20 bands 5 g mobile phone wif gps uhf vhf jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
This document provides specifications for two multi-band jamming devices: the CT-2020-Eur and CT-2020-A. Both devices can jam 20 different frequency bands including 4G, 5G, WiFi, GPS, and more. Key specifications include a power supply of 100-240V AC or 12V car charger, jamming radius of 10-40 meters, weight of 7.5 kg, dimensions of 430*240*90mm, unlimited working time, and 1 year warranty. An optional external battery can provide over 2 hours of additional operation time.Ct-2020h 20 bands Antennas 5g mobile phone wif gps uhf vhf all jammer
Ct-2020h 20 bands Antennas 5g mobile phone wif gps uhf vhf all jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
Ct-2020h 20 bands Antennas 5g mobile phone wif gps uhf vhf all jammer up to 80m http://www.jammers4u.com #jammers #jammer #alljammer #jammers4u Ct-1080h new 4G 5G 8 bands 69w handheld mobile phone jammer
Ct-1080h new 4G 5G 8 bands 69w handheld mobile phone jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
Ct-1080h new 4G 5G 8 bands antennas 69w handheld mobile phone jammer
#jammer #jammers #jammers4u http://www.jammers4u.com Ct 1016 new 16 bands 16 w handheld 5g 4g mobile phone wif gps lojack jammer
Ct 1016 new 16 bands 16 w handheld 5g 4g mobile phone wif gps lojack jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
This document provides specifications for two 16-band signal jammers for Europe and America. Both operate across 16 frequency bands used for mobile networks, GPS, WiFi and remote controls. Key specifications include a power output of 1W per band, a working time of 3 hours from its 16,000 mAh battery, and a jamming range of 10-30 meters depending on antenna used. The devices can turn on, charge, and allow individual bands to be turned on or off.Ct 1016 16 bands handheld jammer user manual v.21.01
Ct 1016 16 bands handheld jammer user manual v.21.01Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
This document provides a user manual for a CT-1016-5G 16 Bands Antenna Jammer. It lists accessories including the main unit, power adapter, car charger, and 16 omni antennas. It describes how to install and operate the device, noting the device should be kept away from electronics when powered on. Temperature operating ranges and battery recharging procedures are also outlined. Frequency bands for both European and American models are defined.DJ-UAV series outdoor anti-drone uav jammer up to 2500m
DJ-UAV series outdoor anti-drone uav jammer up to 2500mShop-WiFi - Wireless RF Technology R&R Group Jammers4u
This document provides specifications for three models of anti-drone UAV jammers - the CT-3091DJ-UAV (5 band), CT-3092DJ-UAV (6 band), and CT-3093DJ-UAV (7 band). The jammers use omni-directional antennas to broadcast signals across multiple frequency bands including 5.8GHz, 2.4GHz, 1.5GHz, 433MHz and 860-920MHz, with power outputs ranging from 10-50W per band and an overall power of 100-175W. The jammers are designed to disrupt commercial drones like DJI Phantom models from 1000-2500 meters away.CT-1040H-DJ Anti-drone hunter jammer user manual v.19.03
CT-1040H-DJ Anti-drone hunter jammer user manual v.19.03Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
CT-1040H-DJ Anti UAV Drone RC GPS 2.4Ghz 5.8Ghz 28W Handheld wearable Jammer up to 500m
Designed to be compact for easy carrying of police and military on terrain use, CT-1040H-DJ Wearable Handheld portable Jammer is specialized to protect soldiers against commercially available drones used by enemy forces for reconnaissance or as weapon delivery systems.
It is fully autonomus with built in antennas and battery for 40 min operation. It is best suited for military special operations teams, police, security forces that are deployed in different situations
Specialized to block 2.4Ghz, GPS, and 5.8Ghz signals that use most of commercial UAV Drones for their remote controls.. The effective blocking range is up to 500 meters. The jamming distance always varied depending on the signal strength and location Do not blocking GSM Cell phones.DDS Bomb IED Jammer Direct Digital Synthesizer Technology
DDS Bomb IED Jammer Direct Digital Synthesizer TechnologyShop-WiFi - Wireless RF Technology R&R Group Jammers4u
DDS Bomb IED Jammer Direct Digital Synthesizer Technology
CT-6080DDS Digital Synthesis Bomb RCIED 8 Bands 800W Jammer up to 1km 16 antennas 123W 8-10w per band 4g mobile phone wif 5ghz gps uhf vhf jammer
16 antennas 123W 8-10w per band 4g mobile phone wif 5ghz gps uhf vhf jammer Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
16 antennas Medium Power 123W - 8-10w per band 4g mobile phone wif 5ghz gps uhf vhf jammer CT-2016H www.jammers4u.comCT-3060- HGA Outdoor Mobiule phone Jammer
The document provides specifications for several models of cell phone jamming devices including the CT-3060A USA model, CT-3060E Eur model, CT-3060GL Lojack GPS model, and CT-3060VU VHF UHF model. It lists the frequency bands and maximum output power for each model. It also describes optional accessories like remote controls, antennas, and warranties.
Drone Jammer
Drone sales are expected to grow exponentially through 2021 despite falling prices, leading to increased security risks from unauthorized drone use. Drones are commonly used for drug trafficking, smuggling contraband into prisons, and aerial spying, and there is concern they could deliver biological weapons. The company R&R Group Jammers4u developed drone jamming systems to protect public events, buildings, borders, and other areas where drones pose risks. The owner of Jammers4u stated that by 2017, security agencies will need drone jamming systems to ensure protection of individuals and property given the large number of drones.
Drone uav outdoor jammer
The document describes three drone jammer models - CT-3040, CT-3060, and CT-3080 - with 4, 6, and 8 bands respectively. They operate on various frequencies for remote control, WiFi, Bluetooth, and GPS with output power ranging from 2W to 50W depending on the frequency band. The jammer models have adjustable output power for each band, overprotection, an Ethernet interface, AC or DC power supply, and a range of 500-1000+ meters. They weigh 25kg and have dimensions of 520 x 340 x 200mm.
Man pack Drone UAV Jammer
This document provides specifications for a four band directional antenna and man pack anti-drone UAV jammer. The antenna operates across four frequency bands between 1575-1620MHz, 2400-2500MHz, 5150-5875MHz. The jammer has a maximum output power of 102W across five bands, and can operate for 1-2 hours on its built-in battery. Key specifications for the four band directional antenna include frequency ranges, output power levels, polarization, beamwidths, front-to-back ratios, and impedances for each band.
Jammers4u ct 3080 n 8 bands 150w 4g mobile phone wifi gps vhf uhf jammer
Jammers4u ct 3080 n 8 bands 150w 4g mobile phone wifi gps vhf uhf jammerShop-WiFi - Wireless RF Technology R&R Group Jammers4u
The document provides specifications for the CT-3080N 150W 8-band jammer, including its frequency ranges and output power levels for GPS, 4G LTE, WiFi, VHF, UHF, GSM, 3G UMTS, and other signals. It can mix and match modules across these 8 bands with adjustable and switchable power levels up to 150W total. The jammer is powered by AC or DC, has a range of 50-150 meters, weighs 11kg, and has external antenna and 1 year warranty.CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w briefcase jammer up to 50m www.jammers4u.comCT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...Shop-WiFi - Wireless RF Technology R&R Group Jammers4u
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w briefcase jammer up to 50m www.jammers4u.comCT-5030 wireless control jammer user guide www.jammers4u.com
CT-5030 wireless control jammer user guide www.jammers4u.comShop-WiFi - Wireless RF Technology R&R Group Jammers4u
CT-5030 Prisons Jammers up to 6 bands 530W with wireless control system. Jamming up to 600m
Especially for prisons and other large sensitive locations such as military or governmental compounds. It can also use in Oil and Gas Storage Facilities and fields, Security Services, Military Units, Secret Services, Museums, Facotry, Border Patrol and Drug Enforcement, Customs, etc. - Remote PC control with software to Turn each jammer, each band or the whole jammer system ON/OFF, VSWR Alarm in a wireless setup (RF module). Each unit offers a key lock support & mounting hardware
Advantages & Features
1. Each unit can jam up to 6 frequency bands simultaneously.
2. Continuous operation even in hot climates with no time limit
3. Design for outdoor installation.
4. Secure design to avoid sabotage .
5. Antenna type options - omni or directional antennas.
6. Selection of antennas to provide more flexibility regarding jamming coverage.
7. PC remote control
CT-5030 6 Bands up to 600m:
CDMA-800 850-894Mhz 100W,
GSM-900 935-960MHz 100W,
2G 1900 1805-1990MHz 100W,
3G 2110-2170MHz 100W
2620-2670MHz:30W or 800MHz:100W
1520-1670MHz:30W or 2400-2500MHz:30W
Total RF output power 530W
Option: 450-470MHz 50W, WiFi 2400-2500MHz:30W, GPS L1 1575MHz:30W, 4G LTE 2620-2690MHz:30W, VHF 130-180MHz:50W, UHF 420-480MHz:50W
6 Bands External Antenna
Power Supply AC220V/ 110V DC27-28V
Power consumption 100/200Watts
Jamming Range 400M CT-4030, 600M CT-5030
Based on back ground signal strength<=-75dbm />s Solution with wireless alarm and control function for Jail / Prison projects
1 Year warranty, Taiwan quality made in Hong Kong
R&R GROUP INTERNATIONAL
Taipei Taiwan, Hong Kong, Dubai UAE
Jammers4u
E-mail: sales@jammers4u.com
http://www.jammers4u.com
CT-3077B jammer user guide v.13.11 by jammers4u
CT-3077B jammer user guide v.13.11 by jammers4uShop-WiFi - Wireless RF Technology R&R Group Jammers4u
CT-3077B EUR 7 Bands 98W GSM 2G 3G 4G 2.4Ghz WIFI Portable Jammer up to 150m
Include Omni and Directional Antennas and car magnetic bases with +24V/45AH LiFePO4 battery
Mobile phones,WIFI + GPS Frequency:
1 4G Low 790-880MHz 20W
2 GSM CDMA 850-965MHz 25W
3 DCS, GSM1800, PCS, CDMA1900 1800-1990MHz 15W
4 UMTS, 3G, WCDMA, TD-SCDMA, CDMA2000 2100-2170MHz 15W
5 4G LTE WiMax2 Europe 2620-2690 5W
6 Bluetooth WIFI 11b/g/n 2400-2500 MHz 8W
7 GPS L1 + SAT cell phone 1520-1670MhHz 10W
TOTAL : 98W
All 7 frequency bands we can mix very flexible - GPS, L2 8W, Low Freq 200-300MHz:20W, 300-400MHz:20W, 4G 2620-2690MHz: 5W, LoJack 173MHz: 20W etc.
Adjustable output power each band, from Max to 0 (OFF)
VSWR over protection for each modular
Battery +24V / 45AH LiFePO4 can work 2 Hours
Power supply: AC110 or 220-240V /DC 27V
Jamming Range Radius 50~150 meters (-75dBm@Omnidirectional antennas)
Weight: 25kg Dimension: 518 x 428 x 228 mm (Case only )
Working time: Without the time limit, May continue to work,
Antenna: External Omni 500mm long and Directional Patch Panel Antennas
(Both omni and directional antennas with frame and car magnetic bases are inlcuded)
1 Year warranty, Taiwan quality made in Hong Kong
R&R GROUP INTERNATIONAL
Taipei Taiwan, Hong Kong, Dubai UAE
Jammers4u
E-mail: sales@jammers4u.com
http://www.jammers4u.com
CT-4030 Prison Wireless Control Jammer User Guide by http://www.jammers4u.com
CT-4030 Prison Wireless Control Jammer User Guide by http://www.jammers4u.comShop-WiFi - Wireless RF Technology R&R Group Jammers4u
The document provides instructions for setting up and operating the CT-4030 wireless control jammer. It can jam cell phone signals across various frequency bands. The jammer unit and accessories like antennas and cables are described. Safety standards for handling the equipment are also outlined. Installation involves selecting a suitable location and checking that all required parts are available. The jammer can be powered using the AC adapter or UPS backup system.More from Shop-WiFi - Wireless RF Technology R&R Group Jammers4u (20)
Jamaxpro 5G 21 Antenna 21w handheld mobile phone wif gps lojack jammer
Jamaxpro 5G 21 Antenna 21w handheld mobile phone wif gps lojack jammer
Ct-2020 20 bands 5 g mobile phone wif gps uhf vhf jammer
Ct-2020 20 bands 5 g mobile phone wif gps uhf vhf jammer
Ct-2020h 20 bands Antennas 5g mobile phone wif gps uhf vhf all jammer
Ct-2020h 20 bands Antennas 5g mobile phone wif gps uhf vhf all jammer
Ct-1080h new 4G 5G 8 bands 69w handheld mobile phone jammer
Ct-1080h new 4G 5G 8 bands 69w handheld mobile phone jammer
Ct 1016 new 16 bands 16 w handheld 5g 4g mobile phone wif gps lojack jammer
Ct 1016 new 16 bands 16 w handheld 5g 4g mobile phone wif gps lojack jammer
Ct 1016 16 bands handheld jammer user manual v.21.01
Ct 1016 16 bands handheld jammer user manual v.21.01
DJ-UAV series outdoor anti-drone uav jammer up to 2500m
DJ-UAV series outdoor anti-drone uav jammer up to 2500m
CT-1040H-DJ Anti-drone hunter jammer user manual v.19.03
CT-1040H-DJ Anti-drone hunter jammer user manual v.19.03
DDS Bomb IED Jammer Direct Digital Synthesizer Technology
DDS Bomb IED Jammer Direct Digital Synthesizer Technology
16 antennas 123W 8-10w per band 4g mobile phone wif 5ghz gps uhf vhf jammer
16 antennas 123W 8-10w per band 4g mobile phone wif 5ghz gps uhf vhf jammer
Jammers4u ct 3080 n 8 bands 150w 4g mobile phone wifi gps vhf uhf jammer
Jammers4u ct 3080 n 8 bands 150w 4g mobile phone wifi gps vhf uhf jammer
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...
CT-2085B EUR WIFI 2.4ghz 5ghz 3.5gz wimax cdam gsm 2g 3g 4g 8 antennas 18w br...
CT-5030 wireless control jammer user guide www.jammers4u.com
CT-5030 wireless control jammer user guide www.jammers4u.com
CT-4030 Prison Wireless Control Jammer User Guide by http://www.jammers4u.com
CT-4030 Prison Wireless Control Jammer User Guide by http://www.jammers4u.com
Recently uploaded
Microsoft - Power Platform_G.Aspiotis.pdf
Revolutionizing Application Development
with AI-powered low-code, presentation by George Aspiotis, Sr. Partner Development Manager, Microsoft
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Neha Bajwa, Vice President of Product Marketing, Neo4j
Join us as we explore breakthrough innovations enabled by interconnected data and AI. Discover firsthand how organizations use relationships in data to uncover contextual insights and solve our most pressing challenges – from optimizing supply chains, detecting fraud, and improving customer experiences to accelerating drug discoveries.
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Video Streaming: Then, Now, and in the Future
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
Building RAG with self-deployed Milvus vector database and Snowpark Container...
This talk will give hands-on advice on building RAG applications with an open-source Milvus database deployed as a docker container. We will also introduce the integration of Milvus with Snowpark Container Services.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
National Security Agency - NSA mobile device best practices
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
Leonard Jayamohan, Partner & Generative AI Lead, Deloitte
This keynote will reveal how Deloitte leverages Neo4j’s graph power for groundbreaking digital twin solutions, achieving a staggering 100x performance boost. Discover the essential role knowledge graphs play in successful generative AI implementations. Plus, get an exclusive look at an innovative Neo4j + Generative AI solution Deloitte is developing in-house.
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Dr. Sean Tan, Head of Data Science, Changi Airport Group
Discover how Changi Airport Group (CAG) leverages graph technologies and generative AI to revolutionize their search capabilities. This session delves into the unique search needs of CAG’s diverse passengers and customers, showcasing how graph data structures enhance the accuracy and relevance of AI-generated search results, mitigating the risk of “hallucinations” and improving the overall customer journey.
Recently uploaded (20)
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
GraphSummit Singapore | The Art of the Possible with Graph - Q2 2024
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdf
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
Monitoring Java Application Security with JDK Tools and JFR Events
Monitoring Java Application Security with JDK Tools and JFR Events
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Building RAG with self-deployed Milvus vector database and Snowpark Container...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
National Security Agency - NSA mobile device best practices
National Security Agency - NSA mobile device best practices
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | The Future of Agility: Supercharging Digital Transfor...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
GraphSummit Singapore | Enhancing Changi Airport Group's Passenger Experience...
Outdoor drone jammer user manual
- 1. CT-3076-HGA Anti-Drone Jamming System with Higher Gain Antenna User Manual
- 2. Foreword This manual is the operating instructions of the CT-3076-HGA jammer (referred to as the “unit” in this manual). The CT-3076-HGA Series jammer is a jamming device intended to prevent all Drone UAVs. The unit outputs 2-40W for each of the Six bands (2 x 2400-2500MHz WiFi: 20W, 2 x GPS L1 1570-1620MHz: 40W. 2 x 5.8GHz:2W ) Safety guidelines Read the following guidelines before using the unit. Failure to comply with these guidelines may be dangerous or illegal. In any event of doubt, consult your local distributor or Vendor’s support staff before use. Handling and transportation Take maximum care while handling the unit. Environmental conditions Do not place the unit near heat sources. The unit dissipates a lot of heat. Never block its ventilation holes and do not insert any objects through them. Always allow at least 10cm clearance in front of ventilation holes on two sides for free air circulation Qualified service Only trained service personnel qualified by Vendor are allowed to diagnose and maintain the unit in accordance with established safety practices and standards.
- 3. Features Jamming frequency (it may change) CH1: 5.7-5.8GHz：2W Ch2: GPS L1 1570-1620MHz: 40W CH3: WiFi 2400-2500MHz: 20W CH4: 5.7-5.8GHz 2W CH5: GPS L1 1570-1620MHz: 40W CH6: WiFi 2400-2500MHz: 20W The input power applied from 110V or 220V AC. ***NOTE***: Before you turn on the jammer, please……….. Make sure connect all Antennas to the jammer
- 4. Step 1: Open the case CH1:5.8GHz Unscrew these two screws to open the caser CH2: GPS L1 CH3: 2400MHz CH4: 5.8GHz CH5: GPS L1 CH6: 2400MHz
- 5. Step 2: Connect all Antennas: CH1 to Antenna CH1, CH2 to CH2.... ***NOTE***: Before you turn on the jammer, please……….. Make sure connect all Antennas to the jammer
- 6. Connect all Antennas CH1 to Antenna CH1 CH2 to Antenna CH2 ..... ....... Ch6 to Antenna CH6
- 7. Step 3: Connect AC Power Cord.. and Switch each band output power to Max... Switch ON each band Clockwise to Max From Off to Max Output Power Switch ON each band Clockwise to Max From Off to Max Output Power