WIFI 3 PHASE STARTER MOTOR REMOTE
•
1 like•161 views
Product description You can switch ON /OFF the starter motor in Wi-Fi range. It will support all type of DOL and Start Delta starter. We can operate by the system by remote and manual. It will support all type starter and HP range. We can read the status of starter ON/ OFF. Support 3 phase and single phase Operating voltage 230V AC/50 HZ
Report
Share
Report
Share
Download to read offline
Recommended
Drone jammer user manual
This user manual provides instructions for operating a Pelican jamming system model CT-6067. It outputs between 15-100W on each of six frequency bands between 1570-1620MHz, 2400-2500MHz, 433MHz, 5700-5900MHz, 865-920MHz, and 1220-1260MHz. Safety guidelines warn to follow all instructions, handle it carefully due to heat dissipation, and only allow qualified service. It features omni-directional antennas, power input from 110V or 220V AC, and LED indicators of conditions. Quick installation involves connecting corresponding antennas to channels and turning the main power and each band power to maximum output. An external battery can also power the jam
Seco Alarm System- Transmitter- Wireless Remote
FPC Security offers Seco Alarm System a transmitter and wireless remote device for security purpose. Buy this product and get free shipping with return policy.
Outdoor drone jammer user manual
This document is a user manual for the CT-3076-HGA anti-drone jamming system with a higher gain antenna. It outputs power across six frequency bands to prevent drone UAVs. The manual provides safety guidelines for handling and using the device, as well as instructions for opening the case, connecting the antennas to the corresponding channels, and powering it on by connecting the AC power cord and setting the output power switches to maximum levels.
Manual Motor valve pop e009501
Manual of Flow Stop is a motor operated shut-off controller for automatic flow stop of gas and water pipes. It is equipped with Z-Wave Plus technology. This means it is particularly suitable for use in smart homes. By manufacturer PoPP
Sx460 avr newage_stamford
The document provides information on the SX460 Automatic Voltage Regulator (AVR) including:
1) The AVR is used to regulate generator voltage and includes under-speed and loss of sensing protection. It controls power to the exciter field to maintain output voltage.
2) The AVR samples generator output voltage and uses feedback to control power to the exciter field, compensating for loads and maintaining voltage.
3) It provides under-frequency protection by reducing output voltage proportionally below a preset threshold based on generator speed.
Mirus drive 18_transformers_datasheet
Mirus Drive 18 Transformers-
Multiple output auto or isolation transformers ideally suited for reduction of harmonics generated by VFDs.
Drive 18™s are used when servicing three 6 pulse drives to produce an 18 pulse scheme.
Each of these configurations will substantially reduce voltage distortion
Available for sales, rentals, hire and lease @ http://www.supremetechnology.com.au/product/mirus-drive-18-transformers.aspx?Id=1881&ProductType=Regular
Zme uzb1 manual
This USB stick connects computers to a wireless Z-Wave network and allows them to manage and use Z-Wave devices. It implements a virtual serial interface for a Z-Wave application and works with certified Z-Wave devices regardless of vendor or date. Linux and Mac OSX have built-in drivers for it, while Windows may require an additional driver available online. It uses 865-870 MHz frequencies to communicate wirelessly up to 100 meters in open fields or over 40 meters in rooms.
Door lock without handle vision operational manual
This document contains information about a wireless electronic deadbolt door lock, including:
1) Specifications of the lock such as operating temperature range, frequency range, battery requirements, and included items.
2) Instructions on setting up the lock with a Z-Wave network controller and adding or removing the lock from the network.
3) Directions for operating the lock including entering codes to lock/unlock and supported code lengths and quantities.
Recommended
Drone jammer user manual
This user manual provides instructions for operating a Pelican jamming system model CT-6067. It outputs between 15-100W on each of six frequency bands between 1570-1620MHz, 2400-2500MHz, 433MHz, 5700-5900MHz, 865-920MHz, and 1220-1260MHz. Safety guidelines warn to follow all instructions, handle it carefully due to heat dissipation, and only allow qualified service. It features omni-directional antennas, power input from 110V or 220V AC, and LED indicators of conditions. Quick installation involves connecting corresponding antennas to channels and turning the main power and each band power to maximum output. An external battery can also power the jam
Seco Alarm System- Transmitter- Wireless Remote
FPC Security offers Seco Alarm System a transmitter and wireless remote device for security purpose. Buy this product and get free shipping with return policy.
Outdoor drone jammer user manual
This document is a user manual for the CT-3076-HGA anti-drone jamming system with a higher gain antenna. It outputs power across six frequency bands to prevent drone UAVs. The manual provides safety guidelines for handling and using the device, as well as instructions for opening the case, connecting the antennas to the corresponding channels, and powering it on by connecting the AC power cord and setting the output power switches to maximum levels.
Manual Motor valve pop e009501
Manual of Flow Stop is a motor operated shut-off controller for automatic flow stop of gas and water pipes. It is equipped with Z-Wave Plus technology. This means it is particularly suitable for use in smart homes. By manufacturer PoPP
Sx460 avr newage_stamford
The document provides information on the SX460 Automatic Voltage Regulator (AVR) including:
1) The AVR is used to regulate generator voltage and includes under-speed and loss of sensing protection. It controls power to the exciter field to maintain output voltage.
2) The AVR samples generator output voltage and uses feedback to control power to the exciter field, compensating for loads and maintaining voltage.
3) It provides under-frequency protection by reducing output voltage proportionally below a preset threshold based on generator speed.
Mirus drive 18_transformers_datasheet
Mirus Drive 18 Transformers-
Multiple output auto or isolation transformers ideally suited for reduction of harmonics generated by VFDs.
Drive 18™s are used when servicing three 6 pulse drives to produce an 18 pulse scheme.
Each of these configurations will substantially reduce voltage distortion
Available for sales, rentals, hire and lease @ http://www.supremetechnology.com.au/product/mirus-drive-18-transformers.aspx?Id=1881&ProductType=Regular
Zme uzb1 manual
This USB stick connects computers to a wireless Z-Wave network and allows them to manage and use Z-Wave devices. It implements a virtual serial interface for a Z-Wave application and works with certified Z-Wave devices regardless of vendor or date. Linux and Mac OSX have built-in drivers for it, while Windows may require an additional driver available online. It uses 865-870 MHz frequencies to communicate wirelessly up to 100 meters in open fields or over 40 meters in rooms.
Door lock without handle vision operational manual
This document contains information about a wireless electronic deadbolt door lock, including:
1) Specifications of the lock such as operating temperature range, frequency range, battery requirements, and included items.
2) Instructions on setting up the lock with a Z-Wave network controller and adding or removing the lock from the network.
3) Directions for operating the lock including entering codes to lock/unlock and supported code lengths and quantities.
Manual sen.inun. vis zf5201
This document provides information about the Z-Wave Flood-Sensor. It monitors for flooding or leakage and sends an alarm to the Z-Wave controller. It includes into a Z-Wave network by pressing the program switch for 1 second. The sensor can detect flooding up to 2 meters away and has a tamper switch that sends an alarm if opened.
Fa10k
The FA10K is a 10 kW FM amplifier for broadcast markets. It uses extremely rugged LDMOS transistors, which provide higher efficiency and thermal stability than traditional MOSFET transistors. The amplifier consists of 5 units of the FA2K 2 kW amplifier. It has automatic power control and can be remotely controlled via TCP/IP. The amplifier is designed to be highly reliable and compliant with broadcasting standards.
Pr adee (2)
1. Voltage regulators are used to provide a stable DC voltage for powering other electronic circuits by regulating the output voltage regardless of changes in the input voltage or load current.
2. There are two main types of voltage regulators - linear regulators which use a series pass transistor operating in the linear region, and switching regulators which provide advantages over linear regulators such as short circuit protection and adjustable output voltage.
3. Characteristics of voltage regulators include a fixed regulated output voltage, a minimum input voltage requirement of at least 2V more than the output voltage, and load current variation from 0 to the maximum rated output current.
Long range wireless modules
This document provides information on the NodeMCU development board. It is an open source firmware and development kit based on the ESP8266 WiFi chip. The board consists of an ESP-12E module, CP2102 for USB to UART connectivity, and a USB connector. It has 8 digital input/output pins and 1 analog input. The board uses the Lua scripting language and the NodeMCU firmware to program the ESP8266 without recompilation. It is a low-cost and compact option for WiFi development.
STM-R Integrated Step Motor
The STM-R integrated step motor from Applied Motion Products is a low cost, easy to use positioning device that's available in NEMA sizes 17 and 23. It;s a perfect way to get precision motion using a PLC or low cost controller like Arduino or Raspberry Pi.
RF Digital Rfd21733 Flyer
This document describes a small wireless module that is interference tolerant, has a built-in antenna, supports various wireless modes like RFID and serial communication, has a long range of 500 feet, low power usage, and can be easily integrated into applications through a header that is compatible with breadboards.
Fibaro Flood Sensor Manual
The document provides an operating manual for the Fibaro Flood Sensor, a Z-Wave compatible flood and temperature sensor that can be powered by batteries or 12/24 VDC. It has a built-in temperature sensor, tilt sensor, and LED indicator. The manual describes how to include/exclude the sensor from the Z-Wave network, install it, reset it, and power it in battery or constant power modes. Diagrams show how to connect it to an alarm system or power source.
Range extender signal repeater aeon labs manual
The document provides instructions for setting up and using an Aeotec Repeater Z-Wave device. It describes how the repeater improves reliability of a Z-Wave network by receiving and rebroadcasting weak signals. It then provides step-by-step instructions for including the repeater in an existing Z-Wave network using a Z-Stick or Minimote controller. Additional sections cover removing the repeater from the network, technical specifications, warranty information and certifications.
Signal generator basics
A signal generator is an electronic device that generates repeating or non-repeating electronic signals in either the analog or the digital domain.
Ep300 gb-r2
The document describes the EP300 electronic potentiometer, which provides a variable resistance output that can be adjusted via contact inputs. Key features include adjustable ramp speeds for increasing and decreasing resistance, adjustable start point and limits, and galvanically isolated inputs. It is designed for use in control systems that require variable resistance, such as engine speed governors. The document provides technical specifications, wiring diagrams, and instructions for setting parameters and resistance values.
Quad Output, Integrated MOSFET Power Supply : MC34700
The document provides an overview of the MC34700 quad-output integrated MOSFET power supply. It has three switching regulators and one linear regulator that can provide up to 1.5A, 1.25A, 1.25A, and 400mA respectively. It features voltage feedforward, current limiting, overvoltage/undervoltage protection and enables various operational modes like normal, standby, and fault. The document describes the internal block diagram, compensation scheme, and typical applications like set-top boxes and printers.
TGR65-brief-150403-BJ
The document provides information about the TGR-65 portable medium wave antenna system. It can be transported by vehicle and set up by a 4 person crew in under an hour. It operates from 500 kHz to 1710 kHz and can be tuned in the field. The system includes the antenna, tuning unit, guy lines, and weighs approximately 760 pounds total. It requires a 100 foot diameter flat area for installation and can withstand winds up to 70 mph.
signal generator(pradeep to batch 08)
This document describes a signal generator circuit that uses the ICL8038 integrated circuit. It explains how the ICL8038 generates repeating electronic signals using two current sources and a comparator to charge and discharge a capacitor in a cycle. It provides the equation to calculate the output frequency based on the capacitor and resistor values. It also lists the typical components used and applications like testing electronic devices and circuits by injecting waveforms.
Riello master-frequency-converters
Ecopowersupplies: Master FC400 series static frequency converters are available from 30 to 120 kVA, with 50 or 60 Hz input and 400 Hz output. The result of extensive experience acquired in the UPS industry. It also providing Riello Master Plus UPS,Riello Master Ups Systems and Master Hp Mht Ups.
Introducing the LT3080 - Adjustable 1.1A Single Resistor LDO Regulator
The document introduces the new LT3080 adjustable linear regulator from Linear Technology. The LT3080 uses a next-generation NPN-based architecture that allows outputs to be paralleled for higher current or spreading heat across a PCB. It can provide adjustable output voltages down to 0V with an input up to 36V and output current of 1.1A. The LT3080 generates an internal reference current that sets the output voltage based on a single external resistor, making it easy to set the output voltage.
Mr3621592164
International Journal of Engineering Research and Applications (IJERA) aims to cover the latest outstanding developments in the field of all Engineering Technologies & science.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
ABB PVI
This document summarizes solar inverters from ABB, specifically models PVI-10.0/12.0-I-OUTD. These are three-phase inverters for commercial PV installations rated at 10-12 kW with efficiencies up to 97.3%. Key features include independent MPPT for each input, outdoor enclosures, monitoring capabilities, and compliance with various international grid standards. Technical specifications include input/output voltage and current ratings, dimensions, weight, and certifications.
Chapter 3 signal-generator
The document discusses signal generators and their uses. It defines a signal generator as a device that provides various waveforms for testing electronic circuits. It classifies common types of signal generators such as audio, radio, microwave, and arbitrary signal generators. It also describes standard signal generators, function generators, and the typical controls found on the front panel of a signal generator such as frequency selection, sweep, amplitude modulation, and output controls. Finally, it provides an example of a simple circuit using a signal generator as a signal source.
Top sale elite screens vmax106 uwh2 e24 vmax2 electric projection screen 106-...
The document summarizes an Elite Screens VMAX106UWH2-E24 electric projection screen. It has a 106-inch diagonal screen with a 16:9 aspect ratio and 24-inch drop. It features a durable all-metal casing for wall or ceiling installation, a 1.1 gain matte white screen material with 160 degree viewing angle, and a synchronized motor for silent operation. It can be controlled via infrared, radio frequency, or low voltage wall switch and includes a 12 volt trigger port.
Manual router technicolor
This document provides instructions for connecting and setting up a CGA0101 wireless cable gateway. It includes the following key steps:
1) Connect the coaxial cable to the cable modem port on the back panel.
2) Connect an Ethernet cable from the cable modem to a computer or router.
3) Connect a telephone line cord from the cable modem to a telephone socket.
4) Connect the power adapter to the cable modem and power it on.
5) Access the cable modem's web interface by entering its IP address into a web browser.
More Related Content
What's hot
Manual sen.inun. vis zf5201
This document provides information about the Z-Wave Flood-Sensor. It monitors for flooding or leakage and sends an alarm to the Z-Wave controller. It includes into a Z-Wave network by pressing the program switch for 1 second. The sensor can detect flooding up to 2 meters away and has a tamper switch that sends an alarm if opened.
Fa10k
The FA10K is a 10 kW FM amplifier for broadcast markets. It uses extremely rugged LDMOS transistors, which provide higher efficiency and thermal stability than traditional MOSFET transistors. The amplifier consists of 5 units of the FA2K 2 kW amplifier. It has automatic power control and can be remotely controlled via TCP/IP. The amplifier is designed to be highly reliable and compliant with broadcasting standards.
Pr adee (2)
1. Voltage regulators are used to provide a stable DC voltage for powering other electronic circuits by regulating the output voltage regardless of changes in the input voltage or load current.
2. There are two main types of voltage regulators - linear regulators which use a series pass transistor operating in the linear region, and switching regulators which provide advantages over linear regulators such as short circuit protection and adjustable output voltage.
3. Characteristics of voltage regulators include a fixed regulated output voltage, a minimum input voltage requirement of at least 2V more than the output voltage, and load current variation from 0 to the maximum rated output current.
Long range wireless modules
This document provides information on the NodeMCU development board. It is an open source firmware and development kit based on the ESP8266 WiFi chip. The board consists of an ESP-12E module, CP2102 for USB to UART connectivity, and a USB connector. It has 8 digital input/output pins and 1 analog input. The board uses the Lua scripting language and the NodeMCU firmware to program the ESP8266 without recompilation. It is a low-cost and compact option for WiFi development.
STM-R Integrated Step Motor
The STM-R integrated step motor from Applied Motion Products is a low cost, easy to use positioning device that's available in NEMA sizes 17 and 23. It;s a perfect way to get precision motion using a PLC or low cost controller like Arduino or Raspberry Pi.
RF Digital Rfd21733 Flyer
This document describes a small wireless module that is interference tolerant, has a built-in antenna, supports various wireless modes like RFID and serial communication, has a long range of 500 feet, low power usage, and can be easily integrated into applications through a header that is compatible with breadboards.
Fibaro Flood Sensor Manual
The document provides an operating manual for the Fibaro Flood Sensor, a Z-Wave compatible flood and temperature sensor that can be powered by batteries or 12/24 VDC. It has a built-in temperature sensor, tilt sensor, and LED indicator. The manual describes how to include/exclude the sensor from the Z-Wave network, install it, reset it, and power it in battery or constant power modes. Diagrams show how to connect it to an alarm system or power source.
Range extender signal repeater aeon labs manual
The document provides instructions for setting up and using an Aeotec Repeater Z-Wave device. It describes how the repeater improves reliability of a Z-Wave network by receiving and rebroadcasting weak signals. It then provides step-by-step instructions for including the repeater in an existing Z-Wave network using a Z-Stick or Minimote controller. Additional sections cover removing the repeater from the network, technical specifications, warranty information and certifications.
Signal generator basics
A signal generator is an electronic device that generates repeating or non-repeating electronic signals in either the analog or the digital domain.
Ep300 gb-r2
The document describes the EP300 electronic potentiometer, which provides a variable resistance output that can be adjusted via contact inputs. Key features include adjustable ramp speeds for increasing and decreasing resistance, adjustable start point and limits, and galvanically isolated inputs. It is designed for use in control systems that require variable resistance, such as engine speed governors. The document provides technical specifications, wiring diagrams, and instructions for setting parameters and resistance values.
Quad Output, Integrated MOSFET Power Supply : MC34700
The document provides an overview of the MC34700 quad-output integrated MOSFET power supply. It has three switching regulators and one linear regulator that can provide up to 1.5A, 1.25A, 1.25A, and 400mA respectively. It features voltage feedforward, current limiting, overvoltage/undervoltage protection and enables various operational modes like normal, standby, and fault. The document describes the internal block diagram, compensation scheme, and typical applications like set-top boxes and printers.
TGR65-brief-150403-BJ
The document provides information about the TGR-65 portable medium wave antenna system. It can be transported by vehicle and set up by a 4 person crew in under an hour. It operates from 500 kHz to 1710 kHz and can be tuned in the field. The system includes the antenna, tuning unit, guy lines, and weighs approximately 760 pounds total. It requires a 100 foot diameter flat area for installation and can withstand winds up to 70 mph.
signal generator(pradeep to batch 08)
This document describes a signal generator circuit that uses the ICL8038 integrated circuit. It explains how the ICL8038 generates repeating electronic signals using two current sources and a comparator to charge and discharge a capacitor in a cycle. It provides the equation to calculate the output frequency based on the capacitor and resistor values. It also lists the typical components used and applications like testing electronic devices and circuits by injecting waveforms.
Riello master-frequency-converters
Ecopowersupplies: Master FC400 series static frequency converters are available from 30 to 120 kVA, with 50 or 60 Hz input and 400 Hz output. The result of extensive experience acquired in the UPS industry. It also providing Riello Master Plus UPS,Riello Master Ups Systems and Master Hp Mht Ups.
Introducing the LT3080 - Adjustable 1.1A Single Resistor LDO Regulator
The document introduces the new LT3080 adjustable linear regulator from Linear Technology. The LT3080 uses a next-generation NPN-based architecture that allows outputs to be paralleled for higher current or spreading heat across a PCB. It can provide adjustable output voltages down to 0V with an input up to 36V and output current of 1.1A. The LT3080 generates an internal reference current that sets the output voltage based on a single external resistor, making it easy to set the output voltage.
Mr3621592164
International Journal of Engineering Research and Applications (IJERA) aims to cover the latest outstanding developments in the field of all Engineering Technologies & science.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
ABB PVI
This document summarizes solar inverters from ABB, specifically models PVI-10.0/12.0-I-OUTD. These are three-phase inverters for commercial PV installations rated at 10-12 kW with efficiencies up to 97.3%. Key features include independent MPPT for each input, outdoor enclosures, monitoring capabilities, and compliance with various international grid standards. Technical specifications include input/output voltage and current ratings, dimensions, weight, and certifications.
Chapter 3 signal-generator
The document discusses signal generators and their uses. It defines a signal generator as a device that provides various waveforms for testing electronic circuits. It classifies common types of signal generators such as audio, radio, microwave, and arbitrary signal generators. It also describes standard signal generators, function generators, and the typical controls found on the front panel of a signal generator such as frequency selection, sweep, amplitude modulation, and output controls. Finally, it provides an example of a simple circuit using a signal generator as a signal source.
Top sale elite screens vmax106 uwh2 e24 vmax2 electric projection screen 106-...
The document summarizes an Elite Screens VMAX106UWH2-E24 electric projection screen. It has a 106-inch diagonal screen with a 16:9 aspect ratio and 24-inch drop. It features a durable all-metal casing for wall or ceiling installation, a 1.1 gain matte white screen material with 160 degree viewing angle, and a synchronized motor for silent operation. It can be controlled via infrared, radio frequency, or low voltage wall switch and includes a 12 volt trigger port.
Manual router technicolor
This document provides instructions for connecting and setting up a CGA0101 wireless cable gateway. It includes the following key steps:
1) Connect the coaxial cable to the cable modem port on the back panel.
2) Connect an Ethernet cable from the cable modem to a computer or router.
3) Connect a telephone line cord from the cable modem to a telephone socket.
4) Connect the power adapter to the cable modem and power it on.
5) Access the cable modem's web interface by entering its IP address into a web browser.
What's hot (20)
Quad Output, Integrated MOSFET Power Supply : MC34700
Quad Output, Integrated MOSFET Power Supply : MC34700
Introducing the LT3080 - Adjustable 1.1A Single Resistor LDO Regulator
Introducing the LT3080 - Adjustable 1.1A Single Resistor LDO Regulator
Top sale elite screens vmax106 uwh2 e24 vmax2 electric projection screen 106-...
Top sale elite screens vmax106 uwh2 e24 vmax2 electric projection screen 106-...
WIFI 3 PHASE STARTER MOTOR REMOTE
- 1. WIFI 3 PHASE STARTER MOTOR CONTROLLER Product description You can switch ON /OFF the starter motor in Wi-Fi range. It will support all type of DOL and Start Delta starter. We can operate by the system by remote and manual. It will support all type starter and HP range. We can read the status of starter ON/ OFF. Support 3 phase and single phase Operating voltage 230V AC/50 HZ Feature: On/Off control. Operating Voltage AC 230V / 50HZ. Isolated power section from the input. Wi-Fi Enabled. Inbuilt power supply. High quality PCB FR4
- 2. Connection Diagram Contact us: inquire@qbitronics.com sales@qbitronics.com Phone: 0422-3593306 +91-9629659111