Ct 1016 16 bands handheld jammer user manual v.21.01

1. CT-1016-5G 16 Bands Antenna Jammer
User Manual
Notice:
1. Do not power on if antenna s are not connected.
2. The functional coverage is greatly affected if antennas are not installed
correctly. Do ensure the antennas are properly connected before usage.
3. When power on, keep away from computer, notebook PC, television, audio
and AM/FM radio to prevent interferences.
4. The normal operational temperature is about 6 5 ° C. If the temperature is
higher than the above, turn off the power immediately and contact local
agent for help.
5. Its functional coverage will depends on the location and strength of the
ambient mobile phone base stations.
6. Placing the device on higher position for better coverage. 2 meters height
is recommended.
7. The Ni-MH rechargeable battery has estimated 500 times recharge cycles.
Please contact the local agent to replace battery if it is not rechargeable.
Accessories:
Main unit x 1pcs
Power adapter x 1pcs
Car charger x 1pcs
Omni antenna x 16 pcs
Omni antenna
Main unit
Car charger
AC Power adapter

2. Default:
Frequency
Bands
CT-1016 Europe Type CT-1016 America Type
Band 1 1: 164-173MHz Lojack 1: 173MHz Lojack
Band 2
2: 1800-1920MHz: DCS,
GSM1800, PHS, PCS, CDMA1900
2: 1800-1990MHz: GSM,
GSM1800, PHS, PCS, NEXTEL,
CDMA1900, GSM1900
Band 3
3: 2100-2170MHz: UMTS, 3G, WCDMA,
TD-SCDMA, CDMA2000
3: 2100-2170MHz: UMTS,
3G, WCDMA, TD-SCDMA,
CDMA2000
Band 4
4: 2570-2690MHz: 4G High
WiMax2, 4G LTE
4: 2500-2700MHz: 4G Wimax
(Sprint), 4G High LTE
Band 5
5: 1450-1620MHz GPS L1 +
Glonass L1 +5G LTE
5: 1570-1620MHz GPS L1 +
Glonass L1
Band 6 6: 920-965MHz: GSM900 6: 850-895MHz: CDMA 850
Band 7
7: 2400-2500MHz: WiFi/Bluetooth
11.b. g.
7: 2300-2500MHz:
WiFi/Bluetooth 11.b. g.+ 4G LTE
Band 8
8:758-830MH: 5G, 4G Low LTE ,
4G WiMax
8: 720-805MHz 4G LTE iPhone
(AT&T & Verizon)
Band 9
9: 1170-1290MHz GPS L2 + L5+ Glonass
L2
9: 1170-1290MHz GPS L2 + L5+ Glonass
L2
Band 10 10: 5.1-5.9GHz: WiFi 5GHz 11.a 10: 5.1-5.9GHz: WiFi 5GHz 11.a
Band 11
11:868MHz: Car Remote or GPS
L2+L5
11:868MHz: Car Remote or GPS
L2 + L5
Band 12
12: 433MHz Car Remote 12: 433MHz: Car Remote or GPS
L3 + L4
Band 13 13 315MHz Car Remote 13 315MHz Car Remote
Band 14
14: 400-480MHz UHF & Car
Remote
14: 400-480MHz UHF & Car
Remote
Band 15 15:3400-3800MHz 5G LTE 15: 617-652MHz 5G LTE
Band 16 16:3400-3800MHz 5G LTE 16: 1700-1800MHz 4G LTE
Power supply: AC Charge (AC220V-DC12V) & Car Charge (DC12V)
Shielding Radius: (5-20) meters@-75dBm still depends on the strength signal in given area.
Dimension: (width, height, length) 200x135x50mm and not include antennas
 Install steps:

3. 1. Please charge battery at least 5 hours before first-time use.
2. Turn off power switch before charging. Charging indicator shall lights on RED when
charging the battery, the indicator will turn to GREEN color while finished.
.
3.Please install antennas and tight up
according to the number indicator.
Kindly refer to the picture below .
4. Turn on the power switch and the Po
wer LED shall light in Green and the LED
of each band will turn on, too .
5. Don’t suggest using while charging.
ON
OFF
GREEN ON

4. ( The operational temperature may too high about 7 5 ° C normally.)
Function Introduction:
 Each band could be chosen operating or not.
1. Find the dip switch on the side of the device as below left picture.
.
The number indicators are corresponding to the number of antennas.
2. Ten arrows toward from OFF to ON (default), by dip switching ON →OFF, each band
could be disable.
3. The corresponding LED indicator shall be turn off.
Followings are the details of the way to choose to different purpose.
Disable LOJACK, , DCS&PCS and 3G 2100MHz
Block WIFI,GPS L1,4GLTE,4GWIMAX, GSM only.
Step 1. Be sure the power is off.
Dip switching the 1&2&3 arrow from ON → OFF.
Step 2. Disconnect the first & second& third antenna (No.1&2&3) and cover the connector
with the hat.
ON
OFF