CT-1040H-DJ Anti UAV Drone RC GPS 2.4Ghz 5.8Ghz 28W Handheld wearable Jammer up to 500m Designed to be compact for easy carrying of police and military on terrain use, CT-1040H-DJ Wearable Handheld portable Jammer is specialized to protect soldiers against commercially available drones used by enemy forces for reconnaissance or as weapon delivery systems. It is fully autonomus with built in antennas and battery for 40 min operation. It is best suited for military special operations teams, police, security forces that are deployed in different situations Specialized to block 2.4Ghz, GPS, and 5.8Ghz signals that use most of commercial UAV Drones for their remote controls.. The effective blocking range is up to 500 meters. The jamming distance always varied depending on the signal strength and location Do not blocking GSM Cell phones.

1. User Manual
Notice:
1. Do not power on if antenna s are not connected.
2. The functional coverage is greatly affected if antennas are not installed
correctly. Do ensure the antennas are properly connected before usage.
3. When power on, keep away from computer, notebook PC, television, audio
and AM/FM radio to prevent interferences.
4. The normal operational temperature is about 6 5 ° C. If the temperature is
higher than the above, turn off the power immediately and contact local
agent for help.
5. Placing the device on higher position for better coverage. 2 meters height
is recommended.
6. The Ni-MH rechargeable battery has estimated 500 times recharge cycles.
Please contact the local agent to replace battery if it is not rechargeable.
Accessories:
Main unit x 1pcs
Power adapter x 1pcs
Car charger x 1pcs
Omni antenna x 4 pcs
Omni antenna
Car charger

2. Default:
Frequency Bands CT-1040H-DJ
Band 1 2400-2500Mhz;8W
Band 2 GPS L1 + Glonass L1 1570-1620MHz:10W
Band 3 5.6-5.9GHz:2W
Band 4 2400-2500Mhz;8W
Power supply: AC Charge (AC220V-DC12V) & Car Charge (DC12V)
Shielding Radius: 100-500 meters
Dimension: (width, height, length) 145x95x45mm and not include antennas
 Install steps:
1. Please charge battery at least 5 hours before first-time use.
2. Turn off power switch before charging. Charging indicator shall lights on RED when
charging the battery, the indicator will turn to GREEN color while finished.
3.Please install antennas and tight up
according to the number indicator.
Kindly refer to the picture below .

3. 4. Turn on the power switch and the Power LED shall light in Green ON
5. Don’t suggest using while charging.
( The operational temperature may too high about 7 5 ° C normally.)
6, Face to Drones to block all down