Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Công ty Cổ phần Hạo Phương xin gửi đến quý khách hàng catalog biến tần Frenic ACE Mới Nhất 2019 . Dòng biến tần chất lượng và kinh tế nhất của hãng Fuji Electric hiện nay, được sản xuất tại Thái Lan và dành riêng cho khu vực Đông Nam Á.
Catalog biến tần Frenic Lift - Fuji Electric mới nhất 2019CTY TNHH HẠO PHƯƠNG
Catalog biến tần Frenic Lift do hãng Fuji Electric Nhật bản phát hành, mô tả đầy đủ về dòng biến tần Frenic Lift gồm:
Thông số kỹ thuật cơ bản
Tính năng
Sơ đồ đấu nối, thông tin các chân điều khiển
Kích thước
Các hàm cài đặt
Biến tần Frenic-Lift với hệ số quá tải lên đến 200%/10s cùng với đó là tuổi thọ và độ bền lâu dài (tuổi thọ DC bus lên đến 10 năm). ACR: 500Hz, hơn 5 lần so với model trước ( so sán với dòng UD).
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
Ls catalog thiet bi tu dong i s5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Axpert i-sine - Multi Function Active Harmonic Filteractiveharmonics
AXPERT-i-sine is designed with the intelligent control algorithm which dynamically changes the switching frequency to optimize the performance & efficiency. The performance of AXPERT-i-sine is less affected by supply voltage harmonic distortion. AXPERT-i-sine provides selective harmonic attenuation up to 51st order.
Bien tan ls gioi thieu bien tan i e5 series (new)-1-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Mitsubishi ac servos melservo j3-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Presentation on HDTV Technology and Scanning Techniques
1) Progressive and interlaced
2) Broadcasting System
3) Aspect Ratio
4) Frame Rate
5) Pixels
6) Frame
7) CRT and HDTV
Ls catalog thiet bi tu dong i s5_e_1105_dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Axpert i-sine - Multi Function Active Harmonic Filteractiveharmonics
AXPERT-i-sine is designed with the intelligent control algorithm which dynamically changes the switching frequency to optimize the performance & efficiency. The performance of AXPERT-i-sine is less affected by supply voltage harmonic distortion. AXPERT-i-sine provides selective harmonic attenuation up to 51st order.
Bien tan ls gioi thieu bien tan i e5 series (new)-1-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Mitsubishi ac servos melservo j3-dienhathe.vnDien Ha The
Khoa Học - Kỹ Thuật & Giải Trí: http://phongvan.org
Tài Liệu Khoa Học Kỹ Thuật: http://tailieukythuat.info
Thiết bị Điện Công Nghiệp - Điện Hạ Thế: http://dienhathe.org
Presentation on HDTV Technology and Scanning Techniques
1) Progressive and interlaced
2) Broadcasting System
3) Aspect Ratio
4) Frame Rate
5) Pixels
6) Frame
7) CRT and HDTV
It was a professional presentation for niksun, but most of the project related content and designs are removed. Only basics and some feature of IPTV is uploaded in these slides.
CCN notes for &th EC students, VTU, UNIT 1 Network MOdels explanation like OSI model ,TCP/IP model and tlepohone networks and cable network for data transmission
RF Fiber Optical Reciever for converting Optical CATV RF signals to electrical RF on coax. Featured with AGC, high level RF output and extra-low noise.
In this project we design low cost high performance programmable home security system. This system uses a few LDR's as input sensors. When above sensor(s) get triggered system may dial the user specified phone number (using build-in DTMF generator) and activate the high power audio alarm and lights. All the parameters of DTMF generator, audio alarm and light interface are programmed through the RS232 serial interface.
Current firmware of this system presents interactive control system through the RS232 interface. This control system consist with the menu driven configuration options, self tests, system report generators, etc.
This system also contain 5W (with 4Ω speaker) audio alarm with three selectable tone configurations, which include Police siren, Fire engine siren and Ambulance siren.
In This PPT we are discussed about complete details of that product (Use,Operation, Technical details, Dimensions, Wiring, and etc..)
Please Support us and Follow our other Sites
https://automationtechplc2.blogspot.com
https://humidificationcontrol.blogspot.com
https://controlsandsystems.business.site
If you enjoyed this article, share it with your friends and colleagues
Generative AI Deep Dive: Advancing from Proof of Concept to ProductionAggregage
Join Maher Hanafi, VP of Engineering at Betterworks, in this new session where he'll share a practical framework to transform Gen AI prototypes into impactful products! He'll delve into the complexities of data collection and management, model selection and optimization, and ensuring security, scalability, and responsible use.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
Welocme to ViralQR, your best QR code generator.ViralQR
Welcome to ViralQR, your best QR code generator available on the market!
At ViralQR, we design static and dynamic QR codes. Our mission is to make business operations easier and customer engagement more powerful through the use of QR technology. Be it a small-scale business or a huge enterprise, our easy-to-use platform provides multiple choices that can be tailored according to your company's branding and marketing strategies.
Our Vision
We are here to make the process of creating QR codes easy and smooth, thus enhancing customer interaction and making business more fluid. We very strongly believe in the ability of QR codes to change the world for businesses in their interaction with customers and are set on making that technology accessible and usable far and wide.
Our Achievements
Ever since its inception, we have successfully served many clients by offering QR codes in their marketing, service delivery, and collection of feedback across various industries. Our platform has been recognized for its ease of use and amazing features, which helped a business to make QR codes.
Our Services
At ViralQR, here is a comprehensive suite of services that caters to your very needs:
Static QR Codes: Create free static QR codes. These QR codes are able to store significant information such as URLs, vCards, plain text, emails and SMS, Wi-Fi credentials, and Bitcoin addresses.
Dynamic QR codes: These also have all the advanced features but are subscription-based. They can directly link to PDF files, images, micro-landing pages, social accounts, review forms, business pages, and applications. In addition, they can be branded with CTAs, frames, patterns, colors, and logos to enhance your branding.
Pricing and Packages
Additionally, there is a 14-day free offer to ViralQR, which is an exceptional opportunity for new users to take a feel of this platform. One can easily subscribe from there and experience the full dynamic of using QR codes. The subscription plans are not only meant for business; they are priced very flexibly so that literally every business could afford to benefit from our service.
Why choose us?
ViralQR will provide services for marketing, advertising, catering, retail, and the like. The QR codes can be posted on fliers, packaging, merchandise, and banners, as well as to substitute for cash and cards in a restaurant or coffee shop. With QR codes integrated into your business, improve customer engagement and streamline operations.
Comprehensive Analytics
Subscribers of ViralQR receive detailed analytics and tracking tools in light of having a view of the core values of QR code performance. Our analytics dashboard shows aggregate views and unique views, as well as detailed information about each impression, including time, device, browser, and estimated location by city and country.
So, thank you for choosing ViralQR; we have an offer of nothing but the best in terms of QR code services to meet business diversity!
Accelerate your Kubernetes clusters with Varnish CachingThijs Feryn
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...UiPathCommunity
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
SAP Sapphire 2024 - ASUG301 building better apps with SAP Fiori.pdfPeter Spielvogel
Building better applications for business users with SAP Fiori.
• What is SAP Fiori and why it matters to you
• How a better user experience drives measurable business benefits
• How to get started with SAP Fiori today
• How SAP Fiori elements accelerates application development
• How SAP Build Code includes SAP Fiori tools and other generative artificial intelligence capabilities
• How SAP Fiori paves the way for using AI in SAP apps
2. 1
ForewordForeword
This manual applies to 1310nm AM direct modulated optical transmitter with
SNMP network management interface. It mainly describes the performance
characteristics, technical parameters, installation and debugging, common
troubleshooting, and other related content of the product. In order to ensure that the
equipment can be successfully installed and safely operated, please read this manual
carefully before installing and debugging the equipment. And the installation and
debugging should be strictly according to the specified steps on the manual to avoid
unnecessary damage to equipment or accident harm to the operator. Any questions,
please contact with us in time.
Special Tips:
■ Optical transmitter is professional equipment, and its installation and debugging
must be operated by special technician. Read this manual carefully before
operating to avoid damage to equipment caused by fault operation or accident
harm to the operator.
■ While the optical transmitter is working, there is an invisible laser beam from the
optical output adapter on the front panel. Avoiding permanent harm to the body
and eye, the optical output should not aim at the human body and human should
not look directly at the optical output with the naked eye!
■ Please make sure that the ground terminal of the case and power outlet has been
reliably grounding before turning on the power (Grounding resistance should be
less than 4Ω) to prevent the static damage the pump laser device and harm to
human because of case charged.
■ To ensure the equipment can work stable over a long time in voltage unsteady or
poor voltage wave region, it´s recommend to the customer that he equips special
AC regulated power supply, or even AC uninterrupted power supply (UPS) system
for conditional regions. In the region with large temperature variation
environment (The equipment's ideal work environment temperature is 25°C) or
bad room environment it´s recommend to the customer that he equips special
air-condition system to improve the work environment.
3. 2
1. Product Summary
1310nm AM direct modulated optical transmitter is the most important equipment to
construct the CATV HFC network. It mainly used for the long distance optical fiber
transmission of TV image signal, digital television signal, telephone voice signal and
data (or compressed data) signal. This product does use the high-performance DFB
laser as the optical source. The RF drive part adopts RF power digital automatic
processing technology and advanced RF pre-distortion circuit, and built-in
microcomputer automatic monitoring system, to ensure the excellent performance
indicators.
2. Performance characteristics
■ Adopt high-performance coaxial/butterfly DFB laser, narrow spectral lines, good
linearity and high output power.
■ The RF drive part adopts the RF power digital automatic processing technology.
Automatic processing the drive level power according to the RF input signal level
and the number of channels (15-84 channels), make the CSO, CTB and C/N index
always at the optimal value to ensure the overall performance.
■ Advanced multi-frequency RF pre-distortion technology, combined with the GaAs
device, effectively improve the CATV system most important CTB and CSO
index, C/N index also gets the maximum upgrade.
■ Adopt advanced 32 bit processor; coordinate with perfect automatic monitoring
system circuit. It can timely and accurately monitor working status of the laser to
ensure a stable optical output power and effectively extend the working life of the
laser.
■ Built-in blue screen 160×32 dot matrix LCD monitor on the front panel,
accurately showing all working status parameters.
■ 19″1U standard rack mount, equipped standard IEEE802.3 10Base-T Ethernet
interface and RS232 interface, can expediently realize network management
monitoring.
■ Fully support <GB/T 20030-2005 HFC Network device management system
specification>.
4. 3
3. Block Diagram
Note: Adopts butterfly DFB laser or coaxial DFB laser.
4. Technology Parameters
4.1 Link test conditions
Special instructions: The performance parameters of this manual according to
the measuring method of GY/T 143-2000 <Specifications and methods of
measurement on AM optical transmitter and receiver used in CATV systems>, and
tested under the specified test conditions.
Test condition: With standard optical fiber and standard optical receiver
composed the test link. Set 84 PAL-D analog TV channel signal at 750MHz frequency
range under the specified link loss. When the optical input power of optical receiver is
-1dBm, measure the C/CTB, C/CSO and C/N.
4.2 Technique Parameters Table
Item Unit Technique parameters
Optical output power mW 4 6 8 10 12 14 16 18 20 22 24 26
Optical link loss dB 7 9 10 11 11.8 12.5 13 13.6 14 14.4 14.8 15.1
Optical wavelength Nm 1310±20
Laser type DFB laser
Optical modulation
mode
Direct optical intensity modulation
Optical connector
type
FC/APC or SC/APC
Frequency range MHz 47-750/862/1003
RF input level dBµV 72-88
Flatness in band dB ±0.75
RF input impedance Ω 75
5. 4
Input return loss dB ≥ 16(47-550MHz); ≥ 14(550-750/862/1003MHz)
C/CSO dB ≥ 60
C/CTB dB ≥ 65
C/N dB ≥ 51
AGC control range dB ±5
MGC control range dB 0-10
Power supply voltage V AC 110V-250V(50Hz)
Consumption W 30
Operating
temperature
°C 0 -- 45
Storage temperature °C -20 -- +65
Relative humidity % Max 95% no condensation
Dimension mm 483(L)×380(W)×44(H)
4.3 Optical link carrier to noise ratio degradation table
Optical
power
Optical link loss (dB)
4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
4mW 53.8 52.8 51.8 51 50.1 49.2 48.2
6mW 53.0 52.0 51.0 50.1 49.1 48.1
8mW 52.8 51.9 51.0 50.1 49.2 48.2
10mW 52.9 51.9 51.0 50.1 49.1 48.2
12mW 52.7 51.8 50.8 49.9 49.0 48.0
14mW 52.4 51.5 50.5 49.5 48.6 47.8
16mW 52.0 51.0 50.1 49.1 48.1
18mW 52.5 51.6 50.6 49.7 48.7 47.9
20mW 51.9 51.0 50.0 49.0 48.0
22mW 52.2 51.4 50.4 49.4 48.6 47.8
24mW 51.5 50.3 49.2 48.5 47.7
26mW 51.5 50.2 49.2 48.5 47.6
6. 5
5. External Function Description
5.1 Front Panel Description
Schematic diagram of the front panel
1) Power indicator: The light is on while the switching power supply inside is
working.
2) Device running indicator: This indicator will flash after the device start running.
3) Laser working status indicator: Red light means the laser is not working, but the
machine parameters are normal; flashing red light means the machine has broken
down, related fault reason see the alarm menu of the display menu; green light
means the laser is working normal.
4) RF status indicator: Flashing red light means the RF input signal is warned; green
light means RF input signal is normal.
5) 160×32 dot-matrix LCD screen: used to display all the parameters of the machine.
6) Display the exit or cancel key of the setup menu.
7) Display the up or increase key of the setup menu.
8) Display the down or decrease key of the setup menu.
9) Display the enter key of the setup menu.
10) Laser switching key: used to control the working status of laser. “ON” means the
laser is open and “OFF” means the laser is closed. Ensure the key is on “OFF”
position before power on. After passing self-test, rotate the key to “ON” position
according to the displayed message.
11) RF input signal test port: -20dB test port of the rear panel RF input port.
7. 6
5.2 Rear Panel Description
Schematic diagram of the rear panel
1) RF signal input.
2) RS232 interface (Console): Used for configuring the network management
parameters.
3) LAN interface: correspond with IEEE802.3 10Base-T, used for network
management.
4) Optical signal output: This interface is the optical signal output port of the device.
The connector type is FC/APC. There is an invisible laser beam from this port
while working normal. So the port should not be aligned to human body or naked
eye to avoid accidental injury.
5) Power input 1(Reserved port, configured dual power or not is decided by the
user).
6) Power input 2.
7) Ground stud of the chassis: used for the connection of the device and ground
wire.
8) Fan outlet.
1 2 3 4 5 6 78
8. 7
5.3 Displayed Parameter description
1) Power on, if the key is on the off position, shows:
Product’s Logo and model
2) Turn the key to the on position, shows the turn on delay:
Delay countdown
3) After entering the system:
RF input signal level and optical output power
at present
4) Press “Enter” key into the menu index
1. Parameter menu; 2. Set parameters; 3.Alarm menu
5) Sub-menu of parameters
Press “Enter” key into the menu
Content Meaning
Optical output power of the laser at
present
Bias current of the laser at present
Internal temperature of the laser
Operating current of the laser
thermoelectric cooler
Transmission channel number of the
system
Laser RF signal level at present
9. 8
RF control mode at present
The offset of control level in the AGC
mode
The attenuation of electrically
controlled attenuator in the MGC
mode
Switching power supply output +5V
supply voltage
Switching power supply output -5V
supply voltage
Switching power supply output +24V
supply voltage
Serial number
Internal temperature at present
IP address
Subnet Mask
Gateway
MAC address
Software system version
10. 9
6) Setting menu
Press “Enter” key into the menu
Content Meaning
Set the displayed optical power unit
Turn on or off the buzzer alarm
Set the control mode of the RF
signal: AGC or MGC
Set the attenuation of MGC
Set the offset of AGC start control
level
Set system transmission channels
number. This parameter is used to
correct the accuracy of displayed
laser RF signal level
Set IP address
Set subnet mask
Set gateway
7) Warning menu
Press “ENTER” into the alarm menu
11. 10
6. Installation debugging
6.1 Unpack and Check
1. Insure the package is not defaced. If it has any damage or water mark, please
contact local agency or carrier.
2. After unpacking, check equipments and accessories according to package list. Any
question, please contact local agency or our company.
3. If you think the equipment has been damaged, please don't electrify to avoid
worse damage. Please contact local agency or our company in time.
6.2 Instruments and tools
1. An optical power meter;
2. A digital multimeter;
3. A standard optical fiber test jumper (FC/APC or SC/APC);
4. Some absolute alcohol and medical cotton wool;
6.3 Installation steps
1. Before installing the equipment, please read the <User's manual> carefully and
install the equipment according to the <User's manual>. Note: For the man-made
damage and other all consequence caused by error installation that not according
to the <User's manual>, we will not be responsible and will not supply free
warranty.
2. Take out the device from the box; fix it to the rack and reliably grounding. (The
grounding resistance must be < 4Ω).
3. Use the digital multimeter to check the supply voltage, make sure the supply
voltage comply with the requirements and the switch key is on the “OFF” position.
Then connect the power supply.
4. Input the RF signal, turn the switch key to the “ON” position and observe the front
panel LED status. After the LED working status indicator turn into green, the
device is working normal. Then press the menu button on the front panel to check
the working parameters.
5. Connect the optical power meter to the optical signal output end by the standard
optical fiber test jumper, then measure the optical output power. Affirm the
measured optical output power and the displayed power are the same and have
reached the nominal value. (Affirm the optical power meter is on 1310nm
wavelength test position; the optical fiber test jumper is the matched one and on
the connector surface has no pollution). Remove the standard optical fiber test
jumper and optical power meter; connect the device to the network. So far, the
device has been completely installed and debugged.
12. 11
7. Common Failure Analysis and Troubleshooting
Failure phenomenon Failure cause Solution
Power on, the front panel
display screen and power
indicator are both off.
Switching power supply couldn't
start; equipment; internal DC
power supply is not working.
Check if the power supply is normal
(should be AC: 110V-250V). If the
supply voltage is normal, it could be a
failure of switching power supply
module. Please contact the dealer or
our company.
Power on; the display screen is
off, only the power indicator is
on.
The internal microprocessor is not
working.
Please contact the dealer or our
company.
Power on; the optical output
power displayed on the front
panel display screen and laser
status indicator are both normal,
but the actual measured optical
output power is low.
1. The poor quality of the test
jumper.
2. The active fiber connector or
adapter may be contaminated.
3. The ceramic tube in the
adapter may have been
broken.
1. Replace with good quality test
jumper.
2. Clean the contaminated active fiber
connector or adapter. Specific
operation methods see “The clean
and maintenance method of optical
fiber connector”.
3. Replace the damaged adapter.
After initial startup, the image of
the optical contact point has
obvious netlike curve or large
particles highlights.
1. The received optical power of
the optical contact point is too
high; the output level of the
optical receiver module is too
high and intermodulation
index of RF signal
deteriorates.
2. The RF signal input of the
optical transmitter is too high;
beyond the device AGC
control range, results in
deterioration of the
intermodulation index.
3. The intermodulation index of
RF signal input of the optical
transmitter itself is poor.
1. Check the received optical power
of the optical contact point and
make appropriate adjustments.
2. Check the input level of the optical
transmitter RF signal, and adjust to
the device required input range.
(RF signal input level should be
72--88dBμV).
3. Check the intermodulation index of
the RF signal input of the optical
transmitter and make appropriate
adjustments.
After initial startup, the image of
the optical contact point has
obvious noises.
1. The received optical power of
the optical contact point is not
high enough, results in
decrease of C/N.
2. The RF signal level input of
the optical transmitter is too
low; make modulation degree
1. Recover received optical power of
the optical contact point by
cleaning the active fiber connector
or. Specific operation methods see
“Clean and maintenance methods
of optical fiber connector”.
2. Check the RF signal level input of
13. 12
of the laser is not enough.
3. The C/N index of system link
signal is too low.
the optical transmitter and adjust to
the device required input range.
(72--88dBμV). When the input
channel number less than 15, set to
the MGC control mode.
3. Use a spectrum analyzer to check
the system link C/N and make
appropriate adjustments. Make
sure the system link signal C/N﹥
51dB.
After initial startup, the image of
several optical contact points
randomly appear obvious noises
or bright trace.
The optical contact point has open
circuit signal interference or strong
interference signal intrusions.
1. Check if there is a strong
interference signal source; change
the optical contact point location if
possible to avoid the influence of
strong interference signal sources.
2. Check the cable lines before the
optical contact point, the shielding
net or the RF connector shielding
effect is not good.
3. Close the equipment enclosure
tightly to ensure the shielding
effect; if possible add shielding
cover to the optical contact point
and reliable grounding.
After initial startup, at optical
contact points, the image of
several channels have obvious
noises.
The C/N indexes of these channels
are too low.
Check the C/N of these channels signal
and make appropriate adjustments.
After initial startup, the image of
several optical contact points
appear one or two horizontal
bright traces.
Power supply AC ripple
interference because of the bad
earth of equipment or power
supply.
Check grounding situation of the
equipment; make sure that every
equipment in the line has been reliably
grounding and the grounding resistance
is﹤4Ω.
After initial startup, the received
optical power of the optical
contact point is unstable and has
large continuous change. The RF
output signal is unstable too. But
the detected optical output
power of the optical transmitter
is normal.
The fiber connector types do not
match, maybe the APC type
connect to PC type, make the
optical signal cannot normal
transmission. The active fiber
connector or adapter may be
contaminated seriously or the
adapter has been broken.
1. Check the fiber connector type;
adopt the APC type fiber connector
to ensure the normal transmission
of optical signal.
2. Clean the contaminated active fiber
connector or adapter. Specific
operation methods see “The clean
and maintenance method of optical
fiber connector”.
3. Replace the damaged adapter.
14. 13
The Clean and Maintenance Method of Optical Fiber Connector
In many times, we consider the decline of the optical power as the equipment
faults, but actually it may be caused by that the optical fiber connector was polluted
by dust or dirt. Inspect the fiber connector, component, or bulkhead with a fiberscope.
If the connector is dirty, clean it with a cleaning technique following these steps:
1. Turn off the device power supply and carefully pull off the optical fiber connector
from the adapter.
2. Wash carefully with good quality lens wiping paper and medical absorbent
alcohol cotton. If use the medical absorbent alcohol cotton, still need to wait 1~2
minutes after wash, let the connector surface dry in the air.
3. Cleaned optical connector should be connected to optical power meter to measure
optical output power to affirm whether it has been cleaned up.
4. When the cleaned optical connector screwed back to adapter, should notice to
make force appropriate to avoid ceramic tube in the adapter crack.
5. The optical fiber connector should be cleaned in pairs. If optical power is on the
low side after clean, the adapter may be polluted, clean it. (Note: Adapter should
be carefully operated, so as to avoid hurting inside fiber.
6. Use compressed air or degrease alcohol cotton to wash the adapter carefully.
When use compressed air, the muzzle aims at china tube of the adapter, clean the
china tube with compressed air. When use degrease alcohol cotton, insert
directions need be consistent, otherwise can’t reach a good clean effect.
Special notice:
a. In the process of clean the active optical fiber connector, you should avoid
direct shining at eye, which will cause permanence burn!!!!
b. Use proper energy to install the active optical connector, or the ceramic tape
in the adaptor will lead to break. Once the ceramic tape is broken, the
optical output power will decrease rapidly. And turn the active optical fiber
connector slightly, the optical output power changes obviously.
c. Please operate the optical fiber under the condition of shut off the pump
laser. Or the high output power will lead to burn the joint of the optical
output fiber, which will cause the output power decrease.
Changes of the equipment lead to some disagree with this manual, without notice.