To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
JPJ1439 On False Data-Injection Attacks against Power System State Estimation...chennaijp
We are good IEEE java projects development center in Chennai and Pondicherry. We guided advanced java technologies projects of cloud computing, data mining, Secure Computing, Networking, Parallel & Distributed Systems, Mobile Computing and Service Computing (Web Service).
For More Details:
http://jpinfotech.org/final-year-ieee-projects/2014-ieee-projects/java-projects/
On-line Power System Static Security Assessment in a Distributed Computing Fr...idescitation
The computation overhead is of major concern when
going for increased accuracy in online power system security
assessment (OPSSA). This paper proposes a scalable solution
technique based on distributed computing architecture to
mitigate the problem. A variant of the master/slave pattern is
used for deploying the cluster of workstations (COW), which
act as the computational engine for the OPSSA. Owing to the
inherent parallel structure in security analysis algorithm, to
exploit the potential of distributed computing, domain
decomposition is adopted instead of functional decomposition.
The security assessment is performed utilizing the developed
composite security index that can accurately differentiate the
secure and non-secure cases and has been defined as a function
of bus voltage and line flow limit violations. Validity of
proposed architecture is demonstrated by the results obtained
from an intensive experimentation using the benchmark IEEE
57 bus test system. The proposed framework, which is scalable,
can be further extended to intelligent monitoring and control
of power system
23 9754 assessment paper id 0023 (ed l)2IAESIJEECS
This paper presents a risk assessment method for assessing the cyber security of power systems in view of the role of protection systems. This paper examines the collision of transmission and bus line protection systems positioned in substations on the cyber-physical performance of the power systems. The projected method simulates the physical feedback of power systems to hateful attacks on protection system settings and parameters. The relationship between protection device settings, protection logic, and circuit breaker logic is analyzed. The expected load reduction (ELC) indicator is used in this paper to determine potential losses in the system due to cyber attacks. The Monte Carlo simulation is used to calculate ELC’s account to assess the capabilities of the attackers and bus arrangements are changed. The influence of the projected risk assessment method is illustrated by the use of the 9-bus system and the IEEE-68 bus system.
Root cause analysis in complex cyber physical systems - Faults ClassificationAlessandro Granato
Master thesis in Engineering in Computer Science: the project regards the development of an offline and deterministic Root Cause Analysis tool based on a data driven approach. Specifically, many deterministic machine learning algorithms have been employed to automatically build a model of a monitored system from training data.
The fundamental difference between the presented methodology and those from the standard literature RCA is that it performs a deeper investigation of the monitored system by combining a per-component and a whole-system analysis with the purpose of accurately predict the state of the single elements of the system as well as consider the impact of possible dependencies between them.
Five experiments have been conducted on a real smart grid dataset, comparing the RCA accuracy of different machine learning algorithms, namely RIPPER, Support Vector Machine, C4.5 and AdaBoost applied to C4.5.
The results show that the proposed method returns a high level of Fault Diagnosis accuracy even in complex situations.
JPJ1439 On False Data-Injection Attacks against Power System State Estimation...chennaijp
We are good IEEE java projects development center in Chennai and Pondicherry. We guided advanced java technologies projects of cloud computing, data mining, Secure Computing, Networking, Parallel & Distributed Systems, Mobile Computing and Service Computing (Web Service).
For More Details:
http://jpinfotech.org/final-year-ieee-projects/2014-ieee-projects/java-projects/
On-line Power System Static Security Assessment in a Distributed Computing Fr...idescitation
The computation overhead is of major concern when
going for increased accuracy in online power system security
assessment (OPSSA). This paper proposes a scalable solution
technique based on distributed computing architecture to
mitigate the problem. A variant of the master/slave pattern is
used for deploying the cluster of workstations (COW), which
act as the computational engine for the OPSSA. Owing to the
inherent parallel structure in security analysis algorithm, to
exploit the potential of distributed computing, domain
decomposition is adopted instead of functional decomposition.
The security assessment is performed utilizing the developed
composite security index that can accurately differentiate the
secure and non-secure cases and has been defined as a function
of bus voltage and line flow limit violations. Validity of
proposed architecture is demonstrated by the results obtained
from an intensive experimentation using the benchmark IEEE
57 bus test system. The proposed framework, which is scalable,
can be further extended to intelligent monitoring and control
of power system
23 9754 assessment paper id 0023 (ed l)2IAESIJEECS
This paper presents a risk assessment method for assessing the cyber security of power systems in view of the role of protection systems. This paper examines the collision of transmission and bus line protection systems positioned in substations on the cyber-physical performance of the power systems. The projected method simulates the physical feedback of power systems to hateful attacks on protection system settings and parameters. The relationship between protection device settings, protection logic, and circuit breaker logic is analyzed. The expected load reduction (ELC) indicator is used in this paper to determine potential losses in the system due to cyber attacks. The Monte Carlo simulation is used to calculate ELC’s account to assess the capabilities of the attackers and bus arrangements are changed. The influence of the projected risk assessment method is illustrated by the use of the 9-bus system and the IEEE-68 bus system.
Root cause analysis in complex cyber physical systems - Faults ClassificationAlessandro Granato
Master thesis in Engineering in Computer Science: the project regards the development of an offline and deterministic Root Cause Analysis tool based on a data driven approach. Specifically, many deterministic machine learning algorithms have been employed to automatically build a model of a monitored system from training data.
The fundamental difference between the presented methodology and those from the standard literature RCA is that it performs a deeper investigation of the monitored system by combining a per-component and a whole-system analysis with the purpose of accurately predict the state of the single elements of the system as well as consider the impact of possible dependencies between them.
Five experiments have been conducted on a real smart grid dataset, comparing the RCA accuracy of different machine learning algorithms, namely RIPPER, Support Vector Machine, C4.5 and AdaBoost applied to C4.5.
The results show that the proposed method returns a high level of Fault Diagnosis accuracy even in complex situations.
A SECURITY PERIOD UPDATE METHOD USING EVALUATION FUNCTION FOR IMPROVING ENERG...csandit
In recent years, Wireless Sensor Networks(WSNs) research has been carried out with the goals
of achieving high security and energy efficiency. In a WSN, sensor nodes are vulnerable to
physical attacks because they are deployed in an open environment. An attacker can inject a
false report into networks using these vulnerabilities. F. Ye et al. proposed statistical en-route
filtering to prevent false report injection attacks. In order to effectively use their scheme,
techniques for determining thresholds using fuzzy logic have been studied. To effectively apply
these techniques to the network, an appropriate update period should be set according to the
network environments. In this paper, we propose a security period update method in order to
improve the lifetime of the network in the statistical en-route filtering approach based on a
wireless sensor network of the cluster environment. The experimental results show that up to an
11.96% improvement of the energy efficiency can be achieved when the security threshold is set
to the optimal period.
Who Monitors the Monitors? Automated, Hierarchical Data Quality Assessment fo...Power System Operation
Distributed sensor systems are a critical component required for the operation of a reliable, resilient, and efficient electrical grid. However, just as the grid requires monitoring, so too does the sensor system itself. Therefore, the continuous assessment of the quality of the data captured by sensors becomes an important obligation and task for transmission and distribution system operators. This paper examines the underlying philosophy of data quality assessment and then uses this perspective to craft a set of requirements for an operational system. The paper then discusses one potential system implementation that meets or exceeds the requirements posed and then examines a few ways data quality assessment could evolve.
IEEE 2014 DOTNET PARALLEL DISTRIBUTED PROJECTS A system-for-denial-of-service...IEEEMEMTECHSTUDENTPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
For further details contact:
N.RAJASEKARAN B.E M.S 9841091117,9840103301.
IMPULSE TECHNOLOGIES,
Old No 251, New No 304,
2nd Floor,
Arcot road ,
Vadapalani ,
Chennai-26.
www.impulse.net.in
Email: ieeeprojects@yahoo.com/ imbpulse@gmail.com
Research on Power Quality Real-Time Monitoring System For High Voltage Switch...IJRESJOURNAL
ABSTRACT: As an important equipment of high voltage switch cabinet distribution plays a key role in the power system of power generation, transmission and distribution of electricity, and monitoring the operation of electrical parameters, based on virtual instrument technology, make full use of the data processing, data analysis, data expression and network function and other advantages, build a set based on the LabVIEW real-time power quality monitoring system innovatively applied in high-voltage switch cabinet. Through building a power quality monitoring platform based on high voltage switchgear in the laboratory, the accuracy of the system measurement is verified. The experimental results show that the design of power quality real-time monitoring system has good performance, high accuracy, friendly interface, and has a good market prospect.
Precision engineering is a subdiscipline of electrical engineering, software engineering, electronics engineering, mechanical engineering, and optical engineering concerned with designing machines, fixtures, and other structures that have exceptionally low tolerances, are repeatable, and are stable over time.
Title of paper: Multi Agent System for Machine Learning Under Uncertainty in Cyber Physical Manufacturing System
Presented at - 9th Workshop on Service Oriented, Holonic and Multi-agent Manufacturing Systems for Industry of the Future
Real-Time Simulation for MBSE of Synchrophasor SystemsLuigi Vanfretti
This talk starts by exploring how electrical power systems are increasingly becoming digitalized, leading to their transformation into a class of cyber-physical systems (a system of systems) where the electrical grid merges with ubiquitous information and communication technologies (ICT).
This type of complex systems present unprecedented challenges in their operation and control, and due to unknown interactions with ICT, require new concepts, methods and tools to facilitate their operational design, manufacturing (of components), and testing/verification/validation of their performance.
Inspired by the tremendous advantages of the model-based system engineering (MBSE) framework developed by the aerospace and military communities, this talk will highlight the challenges to adopt MBSE for electrical power grids. MBSE is not only a framework to deal with all the phases of putting in place complex systems-of-systems, but also provides a foundation for the democratization of technology - both software and hardware.
The talk will illustrate the foundations that have been built by the presenter's research over the last 7 years, placed within the context of MBSE, with focus on areas of power engineering. Some of these foundations and contributions include the OpenIPSL, RaPId, SD3K, BableFish and Khorjin open source software developed and distributed online by the research group, and available at: https://github.com/ALSETLab
A SECURITY PERIOD UPDATE METHOD USING EVALUATION FUNCTION FOR IMPROVING ENERG...csandit
In recent years, Wireless Sensor Networks(WSNs) research has been carried out with the goals
of achieving high security and energy efficiency. In a WSN, sensor nodes are vulnerable to
physical attacks because they are deployed in an open environment. An attacker can inject a
false report into networks using these vulnerabilities. F. Ye et al. proposed statistical en-route
filtering to prevent false report injection attacks. In order to effectively use their scheme,
techniques for determining thresholds using fuzzy logic have been studied. To effectively apply
these techniques to the network, an appropriate update period should be set according to the
network environments. In this paper, we propose a security period update method in order to
improve the lifetime of the network in the statistical en-route filtering approach based on a
wireless sensor network of the cluster environment. The experimental results show that up to an
11.96% improvement of the energy efficiency can be achieved when the security threshold is set
to the optimal period.
Who Monitors the Monitors? Automated, Hierarchical Data Quality Assessment fo...Power System Operation
Distributed sensor systems are a critical component required for the operation of a reliable, resilient, and efficient electrical grid. However, just as the grid requires monitoring, so too does the sensor system itself. Therefore, the continuous assessment of the quality of the data captured by sensors becomes an important obligation and task for transmission and distribution system operators. This paper examines the underlying philosophy of data quality assessment and then uses this perspective to craft a set of requirements for an operational system. The paper then discusses one potential system implementation that meets or exceeds the requirements posed and then examines a few ways data quality assessment could evolve.
IEEE 2014 DOTNET PARALLEL DISTRIBUTED PROJECTS A system-for-denial-of-service...IEEEMEMTECHSTUDENTPROJECTS
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
For further details contact:
N.RAJASEKARAN B.E M.S 9841091117,9840103301.
IMPULSE TECHNOLOGIES,
Old No 251, New No 304,
2nd Floor,
Arcot road ,
Vadapalani ,
Chennai-26.
www.impulse.net.in
Email: ieeeprojects@yahoo.com/ imbpulse@gmail.com
Research on Power Quality Real-Time Monitoring System For High Voltage Switch...IJRESJOURNAL
ABSTRACT: As an important equipment of high voltage switch cabinet distribution plays a key role in the power system of power generation, transmission and distribution of electricity, and monitoring the operation of electrical parameters, based on virtual instrument technology, make full use of the data processing, data analysis, data expression and network function and other advantages, build a set based on the LabVIEW real-time power quality monitoring system innovatively applied in high-voltage switch cabinet. Through building a power quality monitoring platform based on high voltage switchgear in the laboratory, the accuracy of the system measurement is verified. The experimental results show that the design of power quality real-time monitoring system has good performance, high accuracy, friendly interface, and has a good market prospect.
Precision engineering is a subdiscipline of electrical engineering, software engineering, electronics engineering, mechanical engineering, and optical engineering concerned with designing machines, fixtures, and other structures that have exceptionally low tolerances, are repeatable, and are stable over time.
Title of paper: Multi Agent System for Machine Learning Under Uncertainty in Cyber Physical Manufacturing System
Presented at - 9th Workshop on Service Oriented, Holonic and Multi-agent Manufacturing Systems for Industry of the Future
Real-Time Simulation for MBSE of Synchrophasor SystemsLuigi Vanfretti
This talk starts by exploring how electrical power systems are increasingly becoming digitalized, leading to their transformation into a class of cyber-physical systems (a system of systems) where the electrical grid merges with ubiquitous information and communication technologies (ICT).
This type of complex systems present unprecedented challenges in their operation and control, and due to unknown interactions with ICT, require new concepts, methods and tools to facilitate their operational design, manufacturing (of components), and testing/verification/validation of their performance.
Inspired by the tremendous advantages of the model-based system engineering (MBSE) framework developed by the aerospace and military communities, this talk will highlight the challenges to adopt MBSE for electrical power grids. MBSE is not only a framework to deal with all the phases of putting in place complex systems-of-systems, but also provides a foundation for the democratization of technology - both software and hardware.
The talk will illustrate the foundations that have been built by the presenter's research over the last 7 years, placed within the context of MBSE, with focus on areas of power engineering. Some of these foundations and contributions include the OpenIPSL, RaPId, SD3K, BableFish and Khorjin open source software developed and distributed online by the research group, and available at: https://github.com/ALSETLab
On October 15th, two of Pittsburgh’s leading experts on Big Data will show you how you can effectively use it to achieve big results. During this valuable event, you’ll learn:
•What Big Data means
•How to successfully leverage and deploy Big Data to learn more about your customers and produce new offerings
•Examples of how other companies are using Big Data to create customer value
•Local resources that people can use to learn more and get started
•Practical Big Data example: generating insights from structured data sources
Seats are limited, register now: http://www.pdma.org/p/cm/ld/fid=1449
Locating Assets in your Warehouse - A solution for Logistics created by Onyx ...Onyx Beacon
This is an integrated solution of asset tracking, and inventory management in Logistics, for warehouses with high traffic and intense circulation of goods. The solution uses Bluetooth beacons, mobile application and a CMS platform to monitor in real-time all the goods in the warehouse, to identify and easily locate assets, and to instantly update inventory status.
In this system, we've got to implement within
attack in sub-network mistreatment camera. Whenever
the external person redirects into server that point server
can find so apprize to admin regarding within attack
.False information injection attacks from associate degree
individual’s purpose of read associate degreed displayed
what it takes for an adversary to launch a made attack
An intrusion detection algorithm for amiIJCI JOURNAL
Nowadays, using the smart metering devices for energy users to manage a wide variety of subscribers,
reading devices for measuring, billing, disconnection and connection of subscribers’ connection
management is an important issue. The performance of these intelligent systems is based on information
transfer in the context of information technology, so reported data from network should be managed to
avoid the malicious activities that including the issues that could affect the quality of service the system. In
this paper for control of the reported data and to ensure the veracity of the obtained information, using
intrusion detection system is proposed based on the support vector machine and principle component
analysis (PCA) to recognize and identify the intrusions and attacks in the smart grid. Here, the operation of
intrusion detection systems for different kernel of SVM when using support vector machine (SVM) and PCA
simultaneously is studied. To evaluate the algorithm, based on data KDD99, numerical simulation is done
on five different kernels for an intrusion detection system using support vector machine with PCA
simultaneously. Also comparison analysis is investigated for presented intrusion detection algorithm in
terms of time - response, rate of increase network efficiency and increase system error and differences in
the use or lack of use PCA. The results indicate that correct detection rate and the rate of attack error
detection have best value when PCA is used, and when the core of algorithm is radial type, in SVM
algorithm reduces the time for data analysis and enhances performance of intrusion detection.
A robust algorithm based on a failure sensitive matrix for fault diagnosis of...IJMER
International Journal of Modern Engineering Research (IJMER) is Peer reviewed, online Journal. It serves as an international archival forum of scholarly research related to engineering and science education.
International Journal of Modern Engineering Research (IJMER) covers all the fields of engineering and science: Electrical Engineering, Mechanical Engineering, Civil Engineering, Chemical Engineering, Computer Engineering, Agricultural Engineering, Aerospace Engineering, Thermodynamics, Structural Engineering, Control Engineering, Robotics, Mechatronics, Fluid Mechanics, Nanotechnology, Simulators, Web-based Learning, Remote Laboratories, Engineering Design Methods, Education Research, Students' Satisfaction and Motivation, Global Projects, and Assessment…. And many more.
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
Cyber-Defensive Architecture for Networked Industrial Control SystemsIJEACS
This paper deals with the inevitable consequence of the convenience and efficiency we benefit from the open, networked control system operation of safety-critical applications: vulnerability to such system from cyber-attacks. Even with numerous metrics and methods for intrusion detection and mitigation strategy, a complete detection and deterrence of internal code flaws and outside cyber-attacks has not been found and would not be found anytime soon. Considering the ever incompleteness of detection and prevention and the impact and consequence of mal-functions of the safety-critical operations caused by cyber incidents, this paper proposes a new computer control system architecture which assures resiliency even under compromised situations. The proposed architecture is centered on diversification of hardware systems and unidirectional communication from the proposed system in alerting suspicious activities to upper layers. This paper details the architectural structure of the proposed cyber defensive computer control system architecture for power substation applications and its validation in lab experimentation and on a cybersecurity testbed.
Fault diagnosis of a high voltage transmission line using waveform matching a...ijsc
This paper is based on the problem of accurate fault diagnosis by incorporating a waveform matching technique. Fault isolation and detection of a double circuit high voltage power transmission line is of immense importance from point of view of Energy Management services. Power System Fault types namely single line to ground faults, line to line faults, double line to ground faults etc. are responsible for transients in current and voltage waveforms in Power Systems. Waveform matching deals with the approximate superimposition of such waveforms in discretized versions obtained from recording devices and Software respectively. The analogy derived from these waveforms is obtained as an error function of voltage and current, from the considered metering devices. This assists in modelling the fault identification as an optimization problem of minimizing the error between these sets of waveforms. In other words, it utilizes the benefit of software discrepancies between these two waveforms. Analysis has been done using the Bare Bones Particle Swarm Optimizer on an IEEE 2 bus, 6 bus and 14 bus system. The performance of the algorithm has been compared with an analogous meta-heuristic algorithm called BAT optimization on a 2 bus level. The primary focus of this paper is to demonstrate the efficiency of such methods and state the common peculiarities in measurements, and the possible remedies for such distortions.
FUZZY LOGIC APPROACH FOR FAULT DIAGNOSIS OF THREE PHASE TRANSMISSION LINEJournal For Research
Transmission line among the other electrical power system component suffers from unexpected failure due to various random causes. Because transmission line is quite large as it is open in environment. A fault occurs on transmission line when two or more conductors come in contact with each other or ground. This paper presents a proposed model based on MATLAB software to detect the fault on transmission line. Fault detection has been achieved by using Fuzzy Logic based intelligent control technique. The proposed method aims in presenting a fast and accurate fault diagnosis method to classify and identify the type of fault which occurs on a power transmission system. In this paper, some of the unconventional approaches for condition monitoring of power systems comprising of relay Breaker, along with the application of soft computing technique like fuzzy logic. Results show that the proposed methodology is efficient in identifying fault in transmission system.
Fault Diagnosis of a High Voltage Transmission Line Using Waveform Matching A...ijsc
This paper is based on the problem of accurate fault diagnosis by incorporating a waveform matching technique. Fault isolation and detection of a double circuit high voltage power transmission line is of immense importance from point of view of Energy Management services. Power System Fault types namely single line to ground faults, line to line faults, double line to ground faults etc. are responsible for transients in current and voltage waveforms in Power Systems. Waveform matching deals with the approximate superimposition of such waveforms in discretized versions obtained from recording devices and Software respectively. The analogy derived from these waveforms is obtained as an error function of voltage and current, from the considered metering devices. This assists in modelling the fault identification as an optimization problem of minimizing the error between these sets of waveforms. In other words, it utilizes the benefit of software discrepancies between these two waveforms. Analysis has been done using the Bare Bones Particle Swarm Optimizer on an IEEE 2 bus, 6 bus and 14 bus system. The performance of the algorithm has been compared with an analogous meta-heuristic algorithm called BAT optimization on a 2 bus level. The primary focus of this paper is to demonstrate the efficiency of such methods and state the common peculiarities in measurements, and the possible remedies for such distortions.
An Analytical Model of Latency and Data Aggregation Tradeoff in Cluster Based...ijsrd.com
Sensor networks are collection of sensor nodes which co-operatively send sensed data to base station. As sensor nodes are battery driven, an efficient utilization of power is essential in order to use networks for long duration. Therefore it is needed to reduce data traffic inside sensor networks, thereby reducing the amount of data that is needed to send to base station. The main goal of data aggregation algorithms is to gather and aggregate data in an energy efficient manner so that network lifetime is enhanced. In wireless sensor network, periodic data sampling leads to enormous collection of raw facts, the transmission of which would rapidly deplete the sensor power. A fundamental challenge in the design of wireless sensor networks (WSNs) is to maximize their lifetimes. Data aggregation has emerged as a basic approach in WSNs in order to reduce the number of transmissions of sensor nodes, and hence minimizing the overall power consumption in the network. Data aggregation is affected by several factors, such as the placement of aggregation points, the aggregation function, and the density of sensors in the network. In this paper, an analytical model of wireless sensor network is developed and performance is analyzed for varying degree of aggregation and latency parameters. The overall performance of our proposed methods is evaluated using MATLAB simulator in terms of aggregation cycles, average packet drops, transmission cost and network lifetime. Finally, simulation results establish the validity and efficiency of the approach.
Similar to 2014 IEEE JAVA PARALLEL DISTRIBUTED PROJECT On false-data-injection-attacks-against-power (20)
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
To Get any Project for CSE, IT ECE, EEE Contact Me @ 09666155510, 09849539085 or mail us - ieeefinalsemprojects@gmail.com-Visit Our Website: www.finalyearprojects.org
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
2014 IEEE JAVA PARALLEL DISTRIBUTED PROJECT On false-data-injection-attacks-against-power
1. GLOBALSOFT TECHNOLOGIES
IEEE PROJECTS & SOFTWARE DEVELOPMENTS
IEEE FINAL YEAR PROJECTS|IEEE ENGINEERING PROJECTS|IEEE STUDENTS PROJECTS|IEEE
BULK PROJECTS|BE/BTECH/ME/MTECH/MS/MCA PROJECTS|CSE/IT/ECE/EEE PROJECTS
CELL: +91 98495 39085, +91 99662 35788, +91 98495 57908, +91 97014 40401
Visit: www.finalyearprojects.org Mail to:ieeefinalsemprojects@gmail.com
On False Data-Injection Attacks against Power System State
Estimation: Modeling and Countermeasures
ABSTRACT:
It is critical for a power system to estimate its operation state based on meter
measurements in the field and the configuration of power grid networks. Recent
studies show that the adversary can bypass the existing bad data detection
schemes,posing dangerous threats to the operation of power grid systems.
Nevertheless, two critical issues remain open: 1) how can an adversary choose the
meters to compromise to cause the most significant deviation of the system state
estimation, and 2) how can a system operator defend against such attacks? To
address these issues, we first study the problem of finding the optimal attack
strategy—i.e., a data-injection attacking strategy that selects a set of meters to
manipulate so as to cause the maximum damage. We formalize the problem and
develop efficient algorithms to identify the optimal meter set. We implement and
test our attack strategy on various IEEE standard bus systems, and demonstrate its
superiority over a baseline strategy of random selections. To defend agains t false
data-injection attacks, we propose a protection-based defense and a detection-based
defense, respectively. For the protection-based defense, we identify and
2. protect critical sensors and make the system more resilient to attacks. For the
detection-based defense, we develop the spatial-based and temporal-based
detection schemes to accurately identify data-injection attacks.
EXISTING SYSTEM:
State estimation has been widely used by Energy Management Systems (EMS) at
the control center to ensure that the power grid is running in desired states. It
provides the estimation of system states in real time based on meter measurements
in the field. The meter measurements are collected by the Supervisory Control and
Data Acquisition (SCADA) Systems and processed by a state estimator to filter the
measurement noise and to detect gross errors. The results of state estimation are
then used by applications at the control center, for purposes such as contingency
analysis, optimal power flow, economic dispatch, and others.
One can see that state estimation plays a critical role in the stability of power grid
systems. Meter measurements collected via the SCADA system contain not only
measurement noise due to the finite accuracy of meters and communication media,
but also errors caused by various issues for example, meters with faulty connection
and calibration.
To reduce the impact of noise and errors, power system researchers have
developed numerous methods to process meter measurements after the state
estimation process. The essential goal of these methods is to leverage the
redundancy of multiple measurements to identify and remove anomalies. While
most existing techniques for protecting power grid systems were designed to
ensure system reliability (i.e.,against random failures), recently there have been
3. growing concerns in smart grid initiatives on the protection against malicious cyber
attacks . There are growing concerns in the smart grid on protection against
malicious cyber threats and the operation and control of smart grid depend on a
complex cyberspace of computers, software, and communication technologies.
Because the measurement component supported by smart equipment (e.g., smart
meters and sensors) plays an important role, it can be a target for attacks. As those
measuring devices may be connected through open network interfaces and lacking
tamper-resistance hardware increases the possibility of being compromised by the
adversary.
DISADVANTAGES OF EXISTING SYSTEM:
1. The adversary can inject false measurement reports to the controller. This
causes the controller to estimate wrong system states, posing dangerous threats to
the operation of the power grid system.
2. If the controller to estimates wrong system states, posing dangerous threats to
the operation of the power grid system.
PROPOSED SYSTEM:
In this paper, we study a novel problem of defending against false data-injection
attacks from the system operator’s point of view. Because most adversaries are
limited in the amount of resources they possess, we first consider a least-effort
attack model—i.e., the objective of the adversary is to identify the minimum
number of meters that one has to manipulate to change a predetermined number of
state variables (so as to launch a false data-injection attack accordingly).
4. We prove the NP-hardness of this problem by reduction from the minimum sub
additive join problem. To address this problem in a practical setting, we develop a
linear transformation-based approach, which finds the optimal solution through the
matrix transformation. Nevertheless, the computation complexity of the matrix
transformation grows exponentially with the size of the power network. To address
this issue, we develop a heuristic yet extremely efficient approach. Specifically,
through the analysis of the H matrix, for a set of bus state variables, the adversary
needs to compromise less meters when the buses are connected to one another with
the largest degrees and connected to the least number of buses beyond its area.
Based on this insight, we divide the network into a number of overlapping areas.
The linear transformation or brute-force search (BF) can be used to identify the
optimal set of meters for individual small areas and then derive the set of meters
for the whole network.
We have implemented our proposed heuristic-based approach on power system
state manipulation on various IEEE standard buses. Our extensive experimental
data validate the feasibility and effectiveness of the developed approach.
ADVANTAGES OF PROPOSED SYSTEM:
1. The spatial-based detection algorithm is able to recognize at least 95 percent of
the false data-injection attacks once the attack changes more than 6 percent of the
state variable values
2. The temporal-based detection algorithm can identify the compromised meters
that send manipulated measurements quickly.
5. SYSTEM REQUIREMENTS:
HARDWARE REQUIREMENTS:
System : Pentium IV 2.4 GHz.
Hard Disk : 40 GB.
Floppy Drive : 1.44 Mb.
Monitor : 15 VGA Colour.
Mouse : Logitech.
Ram : 512 Mb.
SOFTWARE REQUIREMENTS:
Operating system : Windows XP/7.
Coding Language : JAVA/J2EE
IDE : Netbeans 7.4
Database : MYSQL
REFERENCE:
6. Qingyu Yang, Member, IEEE, Jie Yang, Wei Yu, Dou An,Nan Zhang, and Wei
Zhao, Fellow, IEEE”On False Data-Injection Attacks against Power System
State Estimation: Modeling and Countermeasures”IEEE TRANSACTIONS
ON PARALLEL AND DISTRIBUTED SYSTEMS, VOL. 25,NO. 3,MARCH
2014.