Newtons laws of motion
•
0 likes•894 views
Newton's Laws of Motion are summarized as follows: 1) Newton's First Law describes inertia and states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. 2) Newton's Second Law relates force, mass, and acceleration, stating that acceleration depends on the net force acting on an object and the object's mass, and is calculated as Force = Mass x Acceleration. 3) Newton's Third Law states that for every action, there is an equal and opposite reaction.
Report
Share
Report
Share
Recommended
Assignment 2 (Force and laws of motion)
The document contains 5 questions regarding force and laws of motion. The first question asks to calculate the magnitude of a force that increases the velocity of a 5 kg object from 3 m/s to 7 m/s over 2 seconds. The second question asks what the final velocity would be if the same force acted for 5 seconds instead. The third question asks which scenario would require a greater force: accelerating a 2 kg mass at 5 m/s^2 or a 4 kg mass at 2 m/s^2. The fourth question asks to calculate the braking force on a 1000 kg car that stops within 4 seconds from 108 km/h. The fifth question asks what acceleration a 5 N force would provide if applied to two
Force problems
This document provides examples of force, mass, and acceleration problems using the formula F=ma. It includes 13 practice problems asking the reader to calculate force, mass, or acceleration given two of the three variables. The problems cover scenarios like accelerating skiers, falling elevators, pushed objects, and rolling balls. The reader is provided the formula and told to plug in values and solve for the unknown variable.
6 Newtons Second Law
Newton's second law states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. It can be expressed by the equation F=ma, where F is the net force, m is the mass of the object, and a is the acceleration. The document provides an example problem of calculating the force needed to push a car with a mass of 1000 kg and an acceleration of 0.05 m/sec^2. Using the equation, the force is calculated to be 50 N.
Notes 3.3
Newton's 3rd law states that for every action, there is an equal and opposite reaction. Momentum is the product of an object's mass and velocity. The law of conservation of momentum states that the total momentum of a system remains constant if no external forces act on it. An example calculation shows how to determine the velocity of a ball thrown in the opposite direction of a moving skateboarder using the law of conservation of momentum.
Newton’s laws of motion practice
This document provides a review of Newton's Laws of Motion and includes critical thinking questions and practice exercises. Newton's First Law concerns inertia. The Second Law states that force is dependent on mass and acceleration. It also addresses how changing force or mass impacts acceleration. The Third Law involves action-reaction force pairs. The exercises provide examples applying the laws, such as explaining why a purse falls in a car or how a diving board demonstrates the Third Law.
Newton's second law
Newton left Cambridge to avoid the plague and during this time made important discoveries about light, color, and calculus. He also developed his theory of universal gravitation and laws of motion. Newton's second law of motion states that an object's acceleration depends on the net force acting on it and its mass, represented by the equation F=ma. Using this law, scientists can calculate force, mass, or acceleration when two of the three values are known.
Force, mass, acceleration
This document discusses key concepts and discoveries in gravity and motion. It explains that Galileo showed that the rate at which objects fall is independent of their mass, as the force of gravity and inertia balance out such that acceleration due to gravity is the same for all objects. It then discusses concepts such as air resistance, terminal velocity, free fall, orbits, projectile motion, inertia, and Newton's three laws of motion, including how force equals mass times acceleration according to the second law.
Notes 3.1
1. Sir Isaac Newton formulated the basic laws of mechanics in the late 1600s, including Newton's Three Laws of Motion.
2. Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
3. Newton's Second Law states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
Recommended
Assignment 2 (Force and laws of motion)
The document contains 5 questions regarding force and laws of motion. The first question asks to calculate the magnitude of a force that increases the velocity of a 5 kg object from 3 m/s to 7 m/s over 2 seconds. The second question asks what the final velocity would be if the same force acted for 5 seconds instead. The third question asks which scenario would require a greater force: accelerating a 2 kg mass at 5 m/s^2 or a 4 kg mass at 2 m/s^2. The fourth question asks to calculate the braking force on a 1000 kg car that stops within 4 seconds from 108 km/h. The fifth question asks what acceleration a 5 N force would provide if applied to two
Force problems
This document provides examples of force, mass, and acceleration problems using the formula F=ma. It includes 13 practice problems asking the reader to calculate force, mass, or acceleration given two of the three variables. The problems cover scenarios like accelerating skiers, falling elevators, pushed objects, and rolling balls. The reader is provided the formula and told to plug in values and solve for the unknown variable.
6 Newtons Second Law
Newton's second law states that the acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. It can be expressed by the equation F=ma, where F is the net force, m is the mass of the object, and a is the acceleration. The document provides an example problem of calculating the force needed to push a car with a mass of 1000 kg and an acceleration of 0.05 m/sec^2. Using the equation, the force is calculated to be 50 N.
Notes 3.3
Newton's 3rd law states that for every action, there is an equal and opposite reaction. Momentum is the product of an object's mass and velocity. The law of conservation of momentum states that the total momentum of a system remains constant if no external forces act on it. An example calculation shows how to determine the velocity of a ball thrown in the opposite direction of a moving skateboarder using the law of conservation of momentum.
Newton’s laws of motion practice
This document provides a review of Newton's Laws of Motion and includes critical thinking questions and practice exercises. Newton's First Law concerns inertia. The Second Law states that force is dependent on mass and acceleration. It also addresses how changing force or mass impacts acceleration. The Third Law involves action-reaction force pairs. The exercises provide examples applying the laws, such as explaining why a purse falls in a car or how a diving board demonstrates the Third Law.
Newton's second law
Newton left Cambridge to avoid the plague and during this time made important discoveries about light, color, and calculus. He also developed his theory of universal gravitation and laws of motion. Newton's second law of motion states that an object's acceleration depends on the net force acting on it and its mass, represented by the equation F=ma. Using this law, scientists can calculate force, mass, or acceleration when two of the three values are known.
Force, mass, acceleration
This document discusses key concepts and discoveries in gravity and motion. It explains that Galileo showed that the rate at which objects fall is independent of their mass, as the force of gravity and inertia balance out such that acceleration due to gravity is the same for all objects. It then discusses concepts such as air resistance, terminal velocity, free fall, orbits, projectile motion, inertia, and Newton's three laws of motion, including how force equals mass times acceleration according to the second law.
Notes 3.1
1. Sir Isaac Newton formulated the basic laws of mechanics in the late 1600s, including Newton's Three Laws of Motion.
2. Newton's First Law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
3. Newton's Second Law states that the acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
Newton
Newton's Laws describe the relationship between forces and motion. The First Law describes inertia and how objects at rest or in motion remain so unless acted on by an unbalanced force. The Second Law states that acceleration depends on mass and net force, and can be calculated as acceleration equals net force divided by mass. The Third Law describes that when one object exerts a force on another, the second object exerts an equal but opposite force back on the first.
Notes 3.2
Gravity is a force that depends on mass and accelerates objects. It creates a force called weight between objects due to their masses. The law of universal gravitation states that there is an attractive force between any two masses or objects in the universe whose strength depends on their masses and the distance between them. Friction is a force that opposes motion and works to slow objects down. There are different types of friction including sliding, rolling, air, and viscous friction. Centripetal force is an inward force that pulls an object traveling in a curved path towards the center to maintain its circular motion.
Unit 2
Newton's three laws of motion are: 1) an object in motion stays in motion unless acted on by an external force, 2) the relationship between an object's mass and its acceleration when a force is applied, 3) for every action there is an equal and opposite reaction. Newton's laws have three exceptions: objects moving at light speed, microscopic objects, and objects with strong gravitational forces. All objects in free fall accelerate at the same rate of -9.8 m/s^2 due to gravity, reaching terminal speed when air resistance causes acceleration to decrease and top speed is reached. Vectors are quantities that require both magnitude and direction, represented by arrows.
Physics 8
This document covers the concepts of linear momentum, impulse, and conservation of momentum. It defines linear momentum as the product of an object's mass and velocity, and defines impulse as the product of force and time. It states that impulse causes a change in momentum, and that the total momentum in a system is conserved if the net external force is zero. Examples of elastic and inelastic collisions are provided, as well as examples calculating momentum, impulse, and the center of mass of objects.
Force and Acceleration
The document discusses Newton's Second Law of Motion, which states that the acceleration of an object depends on the net force acting on it and its mass. It can be expressed by the equation Force = mass x acceleration (F=ma). The document provides examples of using the equation to calculate force, mass, or acceleration when two of the three values are known.
Newton’s laws of motion
This document discusses Isaac Newton's three laws of motion and their applications. Newton's first law states that objects at rest stay at rest and objects in motion stay in motion unless acted on by an unbalanced force. Newton's second law establishes that force equals mass times acceleration (F=ma). Newton's third law describes that for every action there is an equal and opposite reaction. Examples are provided to demonstrate these laws, such as how gravity causes apples to fall from trees and how objects with different masses accelerate at the same rate but with different forces due to their mass.
Newton's 2nd law
This document discusses motion and forces, including Newton's Second Law of motion, gravity, air resistance, and sample calculations. Newton's Second Law states that force is equal to mass times acceleration. Gravity is a force that attracts all objects and increases with greater mass or shorter distance. Air resistance opposes the motion of falling objects and depends on factors like speed, surface area, and fluid density. Terminal velocity is reached when gravitational and air resistance forces balance. Sample calculations demonstrate using equations like Force = mass x acceleration to solve for unknown values.
F= Ma
Newton's second law states that acceleration is directly proportional to force and inversely proportional to mass. It also specifies that an object accelerates in the direction of the applied force. Force is calculated using the formula F=ma, where F is force in newtons, m is mass in kilograms, and a is acceleration in meters per second squared. Centripetal force is any force directed toward the center of an object's circular path, such as the force exerted by a skater's partner to keep them moving in a circle.
Newtons 2nd law of motion[1]
Sir Isaac Newton discovered the three laws of motion, including Newton's Second Law which states that the force on an object is equal to its mass times its acceleration (F=ma). Newton's Second Law proves that objects with different masses accelerating due to gravity will hit the ground with different forces, even though they accelerate at the same rate, because force depends on both mass and acceleration. The Second Law is useful for quantifying the relationship between force, mass, and acceleration for objects in motion.
2014 l 18 - calculations for newton's 2nd law
The document discusses Newton's second law of motion, which states that the force exerted on an object is equal to its mass times its acceleration (F=ma). Several examples are provided to demonstrate how to use the equation to calculate force, mass, or acceleration when two variables are known. The relationship between force, mass, and acceleration is explored through problems involving objects like skiers and elevators accelerating under different conditions.
Physics - Chapter 6 - Momentum and Collisions
This document provides an overview of linear momentum and impulse. It defines momentum as the product of an object's mass and velocity (p=mv) and describes how momentum is a vector quantity. Impulse is defined as the change in momentum over time due to an external force (Impulse=Force x Time). The document explains how momentum is conserved in collisions and how the impulse-momentum theorem can be used to analyze collisions. It also distinguishes between perfectly elastic, perfectly inelastic, and inelastic collisions in terms of the objects' motions and changes to their kinetic energy before and after the collision.
2nd Law of Motion
Newton's Second Law relates force, mass, and acceleration using the equation F=ma. The equation can be rearranged to solve for force. Force is measured in Newtons, where 1 Newton is the force needed to accelerate a 1 kilogram mass at 1 meter per second squared. If acceleration is held constant and an object's mass doubles, the force needs to double to maintain the same acceleration according to the Second Law.
5energy
This document covers various topics related to energy, work, and heat:
1. It defines work and power, explaining that work is the effect of a force on motion and power is the rate of doing work over time.
2. It discusses kinetic energy and the work-energy theorem, stating that the total work done by net force equals the change in kinetic energy.
3. It describes heat transfer, temperature, and specific heat capacity, noting that heat is energy transfer between objects due to a temperature difference and specific heat capacity is the amount of heat needed to change an object's temperature.
Newtons laws of_motion - 2nd law
The document discusses Newton's second law of motion, which states that the net force on an object is equal to its mass times its acceleration (F=ma). It provides an example calculation of using the formula to find the net force required to accelerate a 1400 kg car. It also defines that one newton is the force needed to accelerate 1 kg of mass by 1 m/s2. Gravity and its relationship to the second law is discussed, where gravitational force Fg equals mass times gravitational acceleration of 9.8 m/s2. Several example problems are provided to check understanding of applying the second law.
Physics 11
1) This document discusses rotational motion and inertia. It defines rotational kinetic energy as KEr = 1⁄2 Iω2, where I is the object's moment of inertia.
2) The moment of inertia I depends on how mass is distributed about the axis of rotation. I is calculated by I = Σmiri2, where mi is the mass of each tiny part and ri is its distance from the axis.
3) A torque applied to a rotating object will cause it to accelerate according to τ = Iα, where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Momentum ppt physics grade 11
The document discusses momentum and Newton's second law of motion. It defines linear momentum as the product of an object's mass and velocity. Newton's second law is stated as the net external force equals the change in momentum divided by the change in time. The law of conservation of momentum states that the total momentum of an isolated system before and after an interaction, such as a collision, remains the same.
2.4 analysing momentum
Momentum is defined as the product of an object's mass and velocity. The principle of conservation of momentum states that the total momentum of a system remains constant if no external forces act on it. Applications include collisions between objects like cars and the jet propulsion of airplanes, where hot gases ejected from the back provide an equal and opposite momentum to push the plane forward.
Newton’s second law of motion
- Momentum is defined as the product of an object's mass and its velocity. It is a vector quantity that points in the direction of travel.
- The rate of change of an object's momentum is directly proportional to the net external force acting on it. Newton's second law states that force equals mass times acceleration (F=ma).
- Examples are given to illustrate how momentum and force calculations can be used to determine the force needed to stop vehicles of different masses traveling at different velocities over different periods of time.
Lesson plan 6 (kinematics) converted
This physics lesson discusses kinematics of linear motion. It defines key concepts such as distance, displacement, speed, velocity, and acceleration. Distance is the movement of a body between two points in any direction and is a scalar quantity, while displacement is movement between two points in a particular direction and is a vector quantity. Speed is defined as distance divided by time with units of m/sec. The first equation of motion states that for a body with uniform velocity and acceleration, the final velocity (vf) is equal to the initial velocity (vi) plus the acceleration multiplied by time (at).
2
Newton's second law states that the acceleration of an object depends on two variables: the net force acting on the object and the object's mass. The acceleration is directly proportional to the net force and inversely proportional to the mass. Mathematically, this is expressed as: acceleration = net force / mass. The net force is the sum of all forces acting on the object. If the net force is zero, the object does not accelerate.
newtons_laws_of_motion.ppt
This document provides information about Newton's Three Laws of Motion:
1) Newton's First Law of Motion (Law of Inertia) states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. Friction is given as an example of a force that can cause an object in motion to slow down and stop.
2) Newton's Second Law of Motion (Law of Acceleration) states that the net force on an object equals its mass times its acceleration (F=ma). Examples are given to demonstrate how acceleration depends on mass and net force.
3) Newton's Third Law of Motion
Ch.2 l.3 (newton's laws of motion),physics. gr.6 a
This document discusses Newton's three laws of motion:
1) Newton's first law states that objects at rest will stay at rest and objects in motion will stay in motion unless acted on by an unbalanced force. Gravity and friction are common unbalanced forces.
2) Newton's second law relates the acceleration of an object to the net force acting on it and its mass. It is expressed by the equation F=ma, where F is force, m is mass, and a is acceleration.
3) Newton's third law states that for every action there is an equal and opposite reaction. When one object exerts a force on a second object, the second object exerts a force back on the first object
More Related Content
What's hot
Newton
Newton's Laws describe the relationship between forces and motion. The First Law describes inertia and how objects at rest or in motion remain so unless acted on by an unbalanced force. The Second Law states that acceleration depends on mass and net force, and can be calculated as acceleration equals net force divided by mass. The Third Law describes that when one object exerts a force on another, the second object exerts an equal but opposite force back on the first.
Notes 3.2
Gravity is a force that depends on mass and accelerates objects. It creates a force called weight between objects due to their masses. The law of universal gravitation states that there is an attractive force between any two masses or objects in the universe whose strength depends on their masses and the distance between them. Friction is a force that opposes motion and works to slow objects down. There are different types of friction including sliding, rolling, air, and viscous friction. Centripetal force is an inward force that pulls an object traveling in a curved path towards the center to maintain its circular motion.
Unit 2
Newton's three laws of motion are: 1) an object in motion stays in motion unless acted on by an external force, 2) the relationship between an object's mass and its acceleration when a force is applied, 3) for every action there is an equal and opposite reaction. Newton's laws have three exceptions: objects moving at light speed, microscopic objects, and objects with strong gravitational forces. All objects in free fall accelerate at the same rate of -9.8 m/s^2 due to gravity, reaching terminal speed when air resistance causes acceleration to decrease and top speed is reached. Vectors are quantities that require both magnitude and direction, represented by arrows.
Physics 8
This document covers the concepts of linear momentum, impulse, and conservation of momentum. It defines linear momentum as the product of an object's mass and velocity, and defines impulse as the product of force and time. It states that impulse causes a change in momentum, and that the total momentum in a system is conserved if the net external force is zero. Examples of elastic and inelastic collisions are provided, as well as examples calculating momentum, impulse, and the center of mass of objects.
Force and Acceleration
The document discusses Newton's Second Law of Motion, which states that the acceleration of an object depends on the net force acting on it and its mass. It can be expressed by the equation Force = mass x acceleration (F=ma). The document provides examples of using the equation to calculate force, mass, or acceleration when two of the three values are known.
Newton’s laws of motion
This document discusses Isaac Newton's three laws of motion and their applications. Newton's first law states that objects at rest stay at rest and objects in motion stay in motion unless acted on by an unbalanced force. Newton's second law establishes that force equals mass times acceleration (F=ma). Newton's third law describes that for every action there is an equal and opposite reaction. Examples are provided to demonstrate these laws, such as how gravity causes apples to fall from trees and how objects with different masses accelerate at the same rate but with different forces due to their mass.
Newton's 2nd law
This document discusses motion and forces, including Newton's Second Law of motion, gravity, air resistance, and sample calculations. Newton's Second Law states that force is equal to mass times acceleration. Gravity is a force that attracts all objects and increases with greater mass or shorter distance. Air resistance opposes the motion of falling objects and depends on factors like speed, surface area, and fluid density. Terminal velocity is reached when gravitational and air resistance forces balance. Sample calculations demonstrate using equations like Force = mass x acceleration to solve for unknown values.
F= Ma
Newton's second law states that acceleration is directly proportional to force and inversely proportional to mass. It also specifies that an object accelerates in the direction of the applied force. Force is calculated using the formula F=ma, where F is force in newtons, m is mass in kilograms, and a is acceleration in meters per second squared. Centripetal force is any force directed toward the center of an object's circular path, such as the force exerted by a skater's partner to keep them moving in a circle.
Newtons 2nd law of motion[1]
Sir Isaac Newton discovered the three laws of motion, including Newton's Second Law which states that the force on an object is equal to its mass times its acceleration (F=ma). Newton's Second Law proves that objects with different masses accelerating due to gravity will hit the ground with different forces, even though they accelerate at the same rate, because force depends on both mass and acceleration. The Second Law is useful for quantifying the relationship between force, mass, and acceleration for objects in motion.
2014 l 18 - calculations for newton's 2nd law
The document discusses Newton's second law of motion, which states that the force exerted on an object is equal to its mass times its acceleration (F=ma). Several examples are provided to demonstrate how to use the equation to calculate force, mass, or acceleration when two variables are known. The relationship between force, mass, and acceleration is explored through problems involving objects like skiers and elevators accelerating under different conditions.
Physics - Chapter 6 - Momentum and Collisions
This document provides an overview of linear momentum and impulse. It defines momentum as the product of an object's mass and velocity (p=mv) and describes how momentum is a vector quantity. Impulse is defined as the change in momentum over time due to an external force (Impulse=Force x Time). The document explains how momentum is conserved in collisions and how the impulse-momentum theorem can be used to analyze collisions. It also distinguishes between perfectly elastic, perfectly inelastic, and inelastic collisions in terms of the objects' motions and changes to their kinetic energy before and after the collision.
2nd Law of Motion
Newton's Second Law relates force, mass, and acceleration using the equation F=ma. The equation can be rearranged to solve for force. Force is measured in Newtons, where 1 Newton is the force needed to accelerate a 1 kilogram mass at 1 meter per second squared. If acceleration is held constant and an object's mass doubles, the force needs to double to maintain the same acceleration according to the Second Law.
5energy
This document covers various topics related to energy, work, and heat:
1. It defines work and power, explaining that work is the effect of a force on motion and power is the rate of doing work over time.
2. It discusses kinetic energy and the work-energy theorem, stating that the total work done by net force equals the change in kinetic energy.
3. It describes heat transfer, temperature, and specific heat capacity, noting that heat is energy transfer between objects due to a temperature difference and specific heat capacity is the amount of heat needed to change an object's temperature.
Newtons laws of_motion - 2nd law
The document discusses Newton's second law of motion, which states that the net force on an object is equal to its mass times its acceleration (F=ma). It provides an example calculation of using the formula to find the net force required to accelerate a 1400 kg car. It also defines that one newton is the force needed to accelerate 1 kg of mass by 1 m/s2. Gravity and its relationship to the second law is discussed, where gravitational force Fg equals mass times gravitational acceleration of 9.8 m/s2. Several example problems are provided to check understanding of applying the second law.
Physics 11
1) This document discusses rotational motion and inertia. It defines rotational kinetic energy as KEr = 1⁄2 Iω2, where I is the object's moment of inertia.
2) The moment of inertia I depends on how mass is distributed about the axis of rotation. I is calculated by I = Σmiri2, where mi is the mass of each tiny part and ri is its distance from the axis.
3) A torque applied to a rotating object will cause it to accelerate according to τ = Iα, where τ is the torque, I is the moment of inertia, and α is the angular acceleration.
Momentum ppt physics grade 11
The document discusses momentum and Newton's second law of motion. It defines linear momentum as the product of an object's mass and velocity. Newton's second law is stated as the net external force equals the change in momentum divided by the change in time. The law of conservation of momentum states that the total momentum of an isolated system before and after an interaction, such as a collision, remains the same.
2.4 analysing momentum
Momentum is defined as the product of an object's mass and velocity. The principle of conservation of momentum states that the total momentum of a system remains constant if no external forces act on it. Applications include collisions between objects like cars and the jet propulsion of airplanes, where hot gases ejected from the back provide an equal and opposite momentum to push the plane forward.
Newton’s second law of motion
- Momentum is defined as the product of an object's mass and its velocity. It is a vector quantity that points in the direction of travel.
- The rate of change of an object's momentum is directly proportional to the net external force acting on it. Newton's second law states that force equals mass times acceleration (F=ma).
- Examples are given to illustrate how momentum and force calculations can be used to determine the force needed to stop vehicles of different masses traveling at different velocities over different periods of time.
Lesson plan 6 (kinematics) converted
This physics lesson discusses kinematics of linear motion. It defines key concepts such as distance, displacement, speed, velocity, and acceleration. Distance is the movement of a body between two points in any direction and is a scalar quantity, while displacement is movement between two points in a particular direction and is a vector quantity. Speed is defined as distance divided by time with units of m/sec. The first equation of motion states that for a body with uniform velocity and acceleration, the final velocity (vf) is equal to the initial velocity (vi) plus the acceleration multiplied by time (at).
What's hot (19)
Similar to Newtons laws of motion
2
Newton's second law states that the acceleration of an object depends on two variables: the net force acting on the object and the object's mass. The acceleration is directly proportional to the net force and inversely proportional to the mass. Mathematically, this is expressed as: acceleration = net force / mass. The net force is the sum of all forces acting on the object. If the net force is zero, the object does not accelerate.
newtons_laws_of_motion.ppt
This document provides information about Newton's Three Laws of Motion:
1) Newton's First Law of Motion (Law of Inertia) states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. Friction is given as an example of a force that can cause an object in motion to slow down and stop.
2) Newton's Second Law of Motion (Law of Acceleration) states that the net force on an object equals its mass times its acceleration (F=ma). Examples are given to demonstrate how acceleration depends on mass and net force.
3) Newton's Third Law of Motion
Ch.2 l.3 (newton's laws of motion),physics. gr.6 a
This document discusses Newton's three laws of motion:
1) Newton's first law states that objects at rest will stay at rest and objects in motion will stay in motion unless acted on by an unbalanced force. Gravity and friction are common unbalanced forces.
2) Newton's second law relates the acceleration of an object to the net force acting on it and its mass. It is expressed by the equation F=ma, where F is force, m is mass, and a is acceleration.
3) Newton's third law states that for every action there is an equal and opposite reaction. When one object exerts a force on a second object, the second object exerts a force back on the first object
Unit3 force friction
This document provides definitions and concepts related to motion and forces, including:
- The three laws of Newton, definitions of force, net force, and inertia.
- The relationship between force, mass, and acceleration as expressed in the formula a=F/m.
- Different types of forces like friction and their definitions.
- The difference between mass and weight and their relationship as defined by formulas.
- Additional concepts like gravity, free fall, and terminal velocity.
- Examples and exercises are provided to help explain and apply the concepts.
FORCES AND MOTION.2.pptx
This document summarizes Newton's three laws of motion. Newton's first law, the law of inertia, states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. Newton's second law relates the net force acting on an object to its acceleration. The acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass. Newton's third law states that for every action, there is an equal and opposite reaction. The document provides examples and mathematical problems to illustrate Newton's laws.
Rajat manchanda
The document discusses Newton's three laws of motion:
1) An object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force. Friction causes moving objects to slow down.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction. The forces acting between two interacting objects are equal in magnitude but opposite in direction.
Law of acceleration
Newton's second law of motion states that the acceleration of an object is directly proportional to the net force acting on it, and inversely proportional to its mass. The net force on an object can be calculated using the formula F=ma, where F is the net force, m is the mass of the object, and a is the acceleration. Examples are provided to demonstrate how Newton's second law can be used to calculate the force or acceleration when one variable is known.
Rajat manchanda
The document discusses Newton's three laws of motion:
1) An object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force. Friction causes moving objects to slow down.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) For every action, there is an equal and opposite reaction. The forces acting between two interacting objects are equal in magnitude but opposite in direction.
Forces and motion 7 th grade
Here are the steps to solve these Newton's Second Law problems:
1) F = ma
F = Force (N)
m = Mass (kg)
a = Acceleration (m/s2)
2) Plug in the values given and solve for the unknown
3) Check units
4) Report answer with correct number of significant figures based on the values given
Let me know if you need help solving any of these specific problems! Thinking through the concepts and setting up the equations correctly is key.
Newton's second law of motion
- Sir Isaac Newton published his three laws of motion in 1687 in his book "Philosophiae Naturalis Principia Mathematica", establishing the laws of motion that describe how objects move.
- Newton's second law states that the acceleration of an object depends on the net force acting on the object and its mass, such that acceleration is directly proportional to net force and inversely proportional to mass.
- The equation for Newton's second law is: Force = mass x acceleration (F=ma), where the SI unit for force is the Newton.
Newton's law of motion
Newton's laws of motion are three physical laws that, together, laid the foundation for classical mechanics. They describe the relationship between a body and the forces acting upon it, and its motion in response to those forces.
Newton's law of motion (2)
Newton's laws of motion are three physical laws that, together, laid the foundation for classical mechanics. They describe the relationship between a body and the forces acting upon it, and its motion in response to those forces.
newtons_laws_of_motion.ppt
Newton's three laws of motion are summarized as follows:
1) First law - An object at rest stays at rest and an object in motion stays in motion with the same speed and direction unless acted upon by an unbalanced force. Friction is the main force that causes objects to slow down.
2) Second law - The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, in the same direction as the net force, and inversely proportional to the mass of the object.
3) Third law - For every action, there is an equal and opposite reaction. Whenever two objects interact, they apply forces to each other of equal magnitude but opposite direction.
MELS 123 ELECTRONIC LOGIC FOR SCIENCE LECTURE NOTES PPT OMOSAE
This document provides information about Newton's laws of motion. It defines Newton's first law of motion as stating that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. Examples are provided to illustrate the first law. Newton's second law is defined as relating the acceleration of an object to the net force acting on it. Equations for momentum, force, and acceleration are also presented. Newton's laws of motion are described as accurately modeling motion except when dealing with very high speeds near the speed of light or very small objects like atoms, which require relativistic or quantum mechanics, respectively.
8 newton’s laws of motion
Newton's Three Laws of Motion, Statement of Newton's Laws of Motion, Problem Solving Using Newton's Second Law of Motion
Forces_and_Motion.ppt
1. Forces can cause objects to move, change speed, or change direction. They are measured in Newtons and represented by arrows.
2. Newton's Second Law states that acceleration is produced when a net force acts on an object, and is directly proportional to the net force and inversely proportional to the object's mass.
3. Newton's Third Law states that for every action force there is an equal and opposite reaction force. The total momentum of a system remains constant if no external forces act on it.
TYPES OF FORSE
Force is any interaction that, when unopposed, will change the motion of an object. There are two types of forces: contact forces that require direct physical contact between objects, and non-contact forces that act over a distance without direct contact. Gravity is the non-contact force that attracts any two masses. The document goes on to define weight as a force and explain the relationship between mass and weight. It also introduces Hooke's law, Newton's laws of motion, and the law of universal gravitation.
Rockets internet.ppt
The document discusses Newton's second and third laws of motion and how they relate to rocket propulsion. It explains that rockets accelerate due to unbalanced forces from the ejection of exhaust particles, as per Newton's third law of action and reaction. Different rocket designs eject particles of varying mass, affecting their thrust according to the formula force equals mass times acceleration. The document provides examples of water rockets, balloon rockets, and real rockets to illustrate how thrust can be varied based on the mass and speed of exhaust particles.
Physics_Newto's_Law_of_motion.pptx
The document discusses Newton's three laws of motion:
1) An object at rest stays at rest and an object in motion stays in motion unless acted upon by an unbalanced force.
2) The acceleration of an object as produced by a net force is directly proportional to the magnitude of the net force, and inversely proportional to the object's mass.
3) For every action, there is an equal and opposite reaction. Whenever one body exerts a force on a second body, the second body simultaneously exerts a force equal in magnitude and opposite in direction on the first body.
Chapter 3 forces
This unit discusses the effects of forces. It defines force as a push or pull and explains that forces can change an object's shape, motion, and direction of motion. It then introduces Newton's three laws of motion - the first law states that an object at rest stays at rest and an object in motion stays in motion with the same speed and in the same direction unless acted upon by an unbalanced force. The second law states that acceleration is directly proportional to net force and inversely proportional to mass. The third law states that for every action there is an equal and opposite reaction. Examples are provided to illustrate each law.
Similar to Newtons laws of motion (20)
Ch.2 l.3 (newton's laws of motion),physics. gr.6 a
Ch.2 l.3 (newton's laws of motion),physics. gr.6 a
MELS 123 ELECTRONIC LOGIC FOR SCIENCE LECTURE NOTES PPT OMOSAE
MELS 123 ELECTRONIC LOGIC FOR SCIENCE LECTURE NOTES PPT OMOSAE
More from tiffanysci
Interactive textbook ch. 22 the nature of light
1) The document discusses the electromagnetic spectrum, which is made up of different types of electromagnetic waves ranging from gamma rays to radio waves.
2) It explains that electromagnetic waves, including visible light, transfer energy and have different wavelengths and frequencies, though all travel at the same speed in a vacuum.
3) Radio waves, microwaves, infrared waves, visible light, ultraviolet light, and other types of electromagnetic waves are described along with their common uses such as broadcasting, communication, heating food, night vision, and more.
Interactive textbook ch 23 light and our world
Ray diagrams can be used to represent the path of light waves as they interact with mirrors and lenses. There are three types of mirrors: plane mirrors form reversed virtual images, concave mirrors can form real or virtual images depending on the object's position, and convex mirrors always form smaller virtual images. Concave lenses only form virtual images while convex lenses can form real or virtual images depending on the object's distance from the lens.
Interactive textbook ch. 18 sec 1 magnets & magnetism
Magnets have two poles, north and south, and exert magnetic forces on each other and other objects. Earth itself acts like a giant magnet, with its magnetic north pole located near its geographic south pole. Materials are magnetic if their atomic domains are aligned, allowing their magnetic fields to combine. There are different types of magnets including permanent and electromagnets. Earth's rotation creates electric currents in its liquid outer core, generating the planet's magnetic field.
Interactive textbook ch. 17 introduction to electricity
1) Friction and induction are the two main causes of static electricity.
2) Static electricity builds up in clouds during thunderstorms as water droplets, ice, and air move within the storm cloud, transferring negative charges.
3) Lightning rods help protect buildings by providing a path for the electric charges from lightning to safely move to the ground through the rod's wire connection.
Interactive textbook ch. 15 sec 2 & 3 acids and bases
This document provides information about acids and bases. It discusses strong versus weak acids and bases, and how strength is determined by the number of ions formed when dissolved in water. A neutralization reaction occurs when acids and bases mix, forming water and salts. The pH scale is used to measure acidity and basicity, with values below 7 being acidic and above 7 being basic. Living things require a stable pH level in their environment to survive.
Interactive textbook ch. 14 chemical reactions
A chemical reaction occurs when substances break apart or combine to form new substances with different chemical properties. A chemical equation represents a chemical reaction using chemical symbols and formulas, with reactants written before an arrow and products written after. It is important that chemical equations are balanced to obey the law of conservation of mass, which states the total mass is the same for reactants and products.
Interactive textbook ch. 13 chemical bonding
Ionic bonds form when valence electrons are transferred from metal atoms to nonmetal atoms, resulting in positively charged metal ions and negatively charged nonmetal ions that are attracted to each other. Metal atoms easily lose electrons to achieve stable full outer energy levels, while nonmetal atoms gain electrons for the same reason. The ions associate in repeating three-dimensional crystal lattices to form solid ionic compounds that are brittle with high melting points and often dissolve in water.
Interactive textbook ch. 12 periodic table
The document summarizes key aspects of the periodic table, including:
1) Mendeleev arranged elements on cards based on properties and discovered a repeating pattern when ordered by atomic mass, leading to the creation of the periodic table.
2) The periodic table shows elements arranged in order of atomic number and classified as metals, nonmetals, and metalloids, with metals having properties like conductivity.
3) The modern periodic table has rows called periods and columns called groups that show repeating trends in properties across and down the table.
Interactive textbook ch. 11 introduction to atoms
1) The atomic theory has changed over time as scientists gathered new evidence and information. John Dalton proposed the first scientific atomic theory in 1803, stating that all matter is made of atoms that cannot be created, destroyed, or divided.
2) In the late 19th century, scientists like J.J. Thomson discovered smaller particles called electrons within atoms. Thomson proposed the "plum pudding" model where electrons were scattered throughout the atom.
3) Ernest Rutherford's gold foil experiment in 1909 showed that atoms have a small, dense nucleus at their center. This led to Rutherford's nuclear model of the atom. Niels Bohr later incorporated electron orbits into this model.
Interactive textbook ch. 10 heat and heat technology
Thermal energy is the total kinetic energy of particles that make up a substance. Heat is the transfer of thermal energy between objects at different temperatures - it always flows from warmer objects to cooler ones. Thermal energy can be transferred through three processes: conduction (direct contact), convection (transfer of heat by a moving fluid like air or water), and radiation (transfer of heat through electromagnetic waves). Good conductors allow easy transfer of thermal energy through conduction, while insulators inhibit such transfer.
Interactive textbook ch. 9 energy and energy resources
The document summarizes energy conversions. It provides examples of potential energy converting to kinetic energy, such as a skateboarder gaining kinetic energy when going down a half-pipe after gaining potential energy going up. Another example is a stretched rubber band, where elastic potential energy converts to kinetic energy of motion when released. Chemical energy from food is also converted by the body into other usable energy forms.
Interactive textbook ch. 5 matter in motion
Forces have both direction and size. A net force is determined by adding all forces acting on an object. A balanced net force of 0 N means the object will not change its motion, while an unbalanced net force not equal to 0 N will cause a change in the object's motion. Examples given include a chair with balanced forces so it does not move, and a soccer ball kicked with an unbalanced force that changes its motion.
Interactive textbook ch. 4 elements, compounds & mixtures
This document provides an overview of elements, compounds, and mixtures. It begins by defining an element as a pure substance that cannot be separated into simpler substances. Elements are classified as metals, nonmetals, or metalloids based on their physical properties. Compounds are then defined as pure substances composed of two or more elements chemically bonded together in specific ratios. Compounds have unique physical and chemical properties that differ from their component elements. The document concludes by explaining that mixtures are physical combinations of elements or compounds that maintain their individual identities and can typically be separated.
Interactive textbook ch. 4 elements, compounds & mixtures
This document provides an overview of elements, compounds, and mixtures. It begins by defining an element as a pure substance that cannot be separated into simpler substances. Elements are classified as metals, nonmetals, or metalloids based on their physical properties. Compounds are then defined as pure substances composed of two or more elements chemically bonded together in specific ratios. Compounds have unique physical and chemical properties that differ from their component elements. The document concludes by explaining that mixtures are physical combinations of elements or compounds that maintain their individual identities and can typically be separated.
Interactive textbook ch. 2 & 3 the properties & states of matter
Density is a physical property that describes how mass and volume are related in an object. It is calculated by dividing an object's mass by its volume. Knowing an object's density can help identify it, as different substances have different characteristic densities. For example, a golf ball has a higher density than a ping pong ball of similar size because it contains more mass in the same volume. Density is measured in units of mass per unit volume, such as grams per cubic centimeter.
Interactive textbook ch. 1 the world of physical science
The document summarizes the scientific method process used by two engineers, James Czarnowski and Michael Triantafyllou, to improve ship propulsion systems. (1) The engineers observed that ships use a lot of fuel and penguins are efficient swimmers. (2) They hypothesized that a propulsion system imitating a penguin's wing movements would be more efficient than propellers. (3) To test their hypothesis, they conducted experiments comparing propeller-driven boats to designs with movable panels resembling penguin wings.
Interactive Textbook Ch. 22 The Nature of Light
1) The document discusses the electromagnetic spectrum, which is made up of different types of electromagnetic waves ranging from gamma rays to radio waves.
2) It explains that electromagnetic waves, including visible light, transfer energy and have different wavelengths and frequencies, though all travel at the same speed in a vacuum.
3) Radio waves, microwaves, infrared waves, visible light, ultraviolet light, and other types of electromagnetic waves are described along with their common uses such as broadcasting, communication, heating food, night vision, and more.
Interactive Textbook Ch. 21 The Nature of Sound
1) Sound travels faster through solids than liquids or gases, and the speed depends on the temperature of the medium. The speed of sound in air is around 343 m/s.
2) The pitch of a sound depends on its frequency, which is measured in Hertz. Higher frequencies mean a higher pitch. Humans can only hear sounds within a certain frequency range.
3) The Doppler effect causes changes in the perceived pitch of a sound source depending on whether the source is moving towards or away from the listener. This explains why an ambulance siren sounds higher in pitch as it approaches.
Interactive Textbook Ch. 20 The Energy of Waves
1. The document discusses key properties of waves including amplitude, wavelength, frequency, and speed. It defines each property and explains how it relates to the energy carried by a wave.
2. Amplitude is the maximum distance of vibration from the rest position, and waves with larger amplitudes carry more energy since they require more energy to form. Wavelength is the distance between two identical points on waves, and waves with shorter wavelengths have more energy.
3. Frequency is the number of waves passing a point per unit time, measured in Hertz. Higher frequency waves have more energy than lower frequency ones. Wave speed depends on the medium and can be calculated using the equation that relates speed, wavelength, and frequency.
Interactive Textbook Ch. 20 The Energy of Waves
1. The document discusses key properties of waves including amplitude, wavelength, frequency, and speed. It defines each property and explains how it relates to the energy carried by a wave.
2. Amplitude is the maximum distance of vibration from the rest position, and waves with larger amplitudes carry more energy since they require more energy to form. Wavelength is the distance between two identical points on waves, and waves with shorter wavelengths have more energy.
3. Frequency is the number of waves passing a point per unit time, measured in Hertz. Higher frequency waves have more energy than lower frequency ones. Wave speed depends on the medium and can be calculated using the equation that relates speed, wavelength, and frequency.
More from tiffanysci (20)
Interactive textbook ch. 18 sec 1 magnets & magnetism
Interactive textbook ch. 18 sec 1 magnets & magnetism
Interactive textbook ch. 17 introduction to electricity
Interactive textbook ch. 17 introduction to electricity
Interactive textbook ch. 15 sec 2 & 3 acids and bases
Interactive textbook ch. 15 sec 2 & 3 acids and bases
Interactive textbook ch. 10 heat and heat technology
Interactive textbook ch. 10 heat and heat technology
Interactive textbook ch. 9 energy and energy resources
Interactive textbook ch. 9 energy and energy resources
Interactive textbook ch. 4 elements, compounds & mixtures
Interactive textbook ch. 4 elements, compounds & mixtures
Interactive textbook ch. 4 elements, compounds & mixtures
Interactive textbook ch. 4 elements, compounds & mixtures
Interactive textbook ch. 2 & 3 the properties & states of matter
Interactive textbook ch. 2 & 3 the properties & states of matter
Interactive textbook ch. 1 the world of physical science
Interactive textbook ch. 1 the world of physical science
Recently uploaded
BREEDING METHODS FOR DISEASE RESISTANCE.pptx
Plant breeding for disease resistance is a strategy to reduce crop losses caused by disease. Plants have an innate immune system that allows them to recognize pathogens and provide resistance. However, breeding for long-lasting resistance often involves combining multiple resistance genes
Equivariant neural networks and representation theory
Or: Beyond linear.
Abstract: Equivariant neural networks are neural networks that incorporate symmetries. The nonlinear activation functions in these networks result in interesting nonlinear equivariant maps between simple representations, and motivate the key player of this talk: piecewise linear representation theory.
Disclaimer: No one is perfect, so please mind that there might be mistakes and typos.
dtubbenhauer@gmail.com
Corrected slides: dtubbenhauer.com/talks.html
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
ESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Nucleic Acid-its structural and functional complexity.
This presentation explores a brief idea about the structural and functional attributes of nucleotides, the structure and function of genetic materials along with the impact of UV rays and pH upon them.
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsEWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Cytokines and their role in immune regulation.pptx
This presentation covers the content and information on "Cytokines " and their role in immune regulation .
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
ANAMOLOUS SECONDARY GROWTH IN DICOT ROOTS.pptx
Abnormal or anomalous secondary growth in plants. It defines secondary growth as an increase in plant girth due to vascular cambium or cork cambium. Anomalous secondary growth does not follow the normal pattern of a single vascular cambium producing xylem internally and phloem externally.
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
Recently uploaded (20)
Equivariant neural networks and representation theory
Equivariant neural networks and representation theory
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
Nucleic Acid-its structural and functional complexity.
Nucleic Acid-its structural and functional complexity.
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Cytokines and their role in immune regulation.pptx
Cytokines and their role in immune regulation.pptx
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Newtons laws of motion
- 6. Newton’s Laws of Motion
- 7. Newton’s 1st Law Inertia- An object at rest will stay at rest and an object in motion will stay in motion unless acted upon by an outside force
- 8. Newton’s 2nd Law Acceleration of an object depends on the mass and the force applied *If you increase the mass of an object then the acceleration decreases *If you increase the force on an object then the acceleration increases
- 9. Formula for 2nd Law: Force = mass x acceleration Force is measured in Newtons (N) kg m = N s2
- 10. If F = M x A Then M = F/A And A = F/M
- 11. Newton’s 3rd Law For every action there is an equal and opposite reaction
- 12. Newton’s 3rd Law example
- 13. Force Problems 1. What is the force of an object that has a mass of 6 kg and an acceleration of 8 m/s2?
- 14. Force Problems 2. What acceleration is required to give a projectile with a mass of 500 kg and a force of 1500N?
- 15. Force Problems 3. What would be the mass of an object which is accelerated at 15 m/s2 due to a force of 45 N?
- 16. Force Problems 4. What would be the acceleration of an object with a mass of 20 kg when hit with a force of 100 N?
- 17. Force Problems 5. What would be the acceleration of an object with a mass of 2 kg hit with a force of 100 N?
- 18. Force Problems 6. How much force is needed to move a 0.1 kg snowball at a rate of 15 m/s2 upward?
- 19. Force Problems 7. A 0.02 N push accelerates a table- tennis ball along a table at 8 m/s2 north. What is the mass of the ball?
- 20. Force Problems 8. At lift-off, an astronaut on the space shuttle experiences an acceleration of 35 m/s2 upward. What force does an 80 kg astronaut experience during this acceleration?
- 21. Force Problems 9. A car accelerates 8 m/s2 with a mass of 2000 kg. What is the force? 9. A force of 169 N is applied to an object with a mass of 3 kg. What is the acceleration?