TGS Arcis- East Coast- NE Newfoundland Flemish Pass
•
0 likes•182 views
This document summarizes a multi-client 2D seismic survey conducted in NE Newfoundland Flemish Pass between 2012-2014. It details the acquisition parameters including the vessel, streamer length, shot and group intervals, as well as processing performed by PGS and TGS. The final processed products include pre-stack migrated CDP gathers, raw and processed migrations, angle stacks, and velocities.
Report
Share
Report
Share
Download to read offline
Recommended
TGS Arcis- Labrador Sea 2D
This document summarizes a multi-client 2D seismic survey in the Labrador Sea covering 26,676 km that was acquired between 2011-2012 and 2014. It details the acquisition parameters including the vessel, airgun source, streamer length and depth, sample interval, and nominal fold. It also outlines the processing sequence performed by PGS and TGS-Imaging including trace editing, velocity analysis, pre-stack time migration, and post-migration conditioning to output the final SEGY dataset. Finally, it lists the available time deliverables including field data, velocity analyses, stacks, and navigation data.
TGS Arcis- East Coast- Southeast Grand Banks
The document summarizes seismic acquisition and processing parameters for a marine seismic survey conducted off the coast of Newfoundland, Canada between July and October 2015. The survey covered 14,599 km using a 24-bit streamer towed behind the vessel Atlantic Explorer. Initial processing was done by PGS and included noise attenuation, wavefield separation, and extrapolation. Further processing will be done by Arcis to produce outputs such as pre-stack migrated gathers, raw and processed migrations, velocities, and angle stacks.
TGS Arcis- East Coast- Labrador Sea 2D deep basin
This document describes a 2D multi-client seismic survey conducted in the Labrador Sea between Canada and Greenland in 2013. It provides details on the acquisition parameters, processing flows, and deliverables for both time and depth processing of the 2,963 km of seismic data collected. The time processing involved noise attenuation, velocity analysis, migration, and stacking to produce interpretable seismic sections. Depth processing used tomographic inversion and isotropic and anisotropic Kirchhoff migration as well as reverse time migration on select lines to build accurate velocity models and produce pre-stack depth migrated volumes up to 30km deep.
TGS Arcis- East Coast- Nova Scotia Renaissance phase
This document describes a multi-client 2D seismic survey conducted off the coast of Nova Scotia, Canada. It details the acquisition parameters, processing workflows, and available deliverables for both time and depth processing of the 2518.3 km survey. Time processing included velocity analysis, multiple attenuation, migration, stacking, and filtering to produce processed time migrations. Depth processing utilized iterative velocity model building, Kirchhoff pre-stack depth migration, and reverse time migration to produce processed depth volume images of the subsurface geology including sediment, salt, and subsalt structures.
IEEE Young Professionals Webinar on 6/09/2016: NASA GSFC's WISM Radiometer wi...
NASA GSFC is developing a Wideband Instrument for Snow Measurement (WISM) and has teamed up with investigators from the Harris Corp., NASA Glenn Research Center, University of Washington (UWA), Boise State University (BSU), and Nuvotronics Corp. to achieve this task. WISM encompasses a suite of instruments, consisting of a Lidar, Synthetic Aperture Radar and Radiometer, with capability to perform snow parameter measurements across multiple frequency bands. NASA GSFC’s Role in this project is primarily to develop the Radiometer. Therefore, this work presents the prior accomplishments, current status and path forward for GSFC's WISM Radiometer.
Oil and Gas Imaging, pumpsandpipesmdhc
Seismic imaging is used in oil and gas exploration to determine reservoir geometry and properties by analyzing acoustic echo reflections from subsurface layers. It is a two-step process that first uses varying source-receiver separations and tomography to determine subsurface velocities, and then backpropagates measured sound waves to form images. Advancements include more accurate imaging algorithms, improved velocity modeling tools, and increased data acquisition apertures, but challenges remain such as illumination limitations, complex velocity models, imaging steep dips and structures, and issues of resolution and noise.
TH1.L10.1: TANDEM-X: SCIENTIFIC CONTRIBUTIONS
TanDEM-X is a satellite mission to generate a global digital elevation model. The document provides an overview of the TanDEM-X mission status and scientific contributions since its launch in June 2010. It describes the mission objectives to generate DEMs, measure surface velocities, and demonstrate new SAR techniques. The commissioning phase involves calibration and testing of the interferometric modes in monostatic and bistatic configurations. Initial data takes show successful interferometry and polarimetric SAR imaging capabilities. The document outlines the data acquisition plan and opportunities for scientific proposals and experimental products.
Khi 054 revised dt report
This report summarizes the results of a single site verification test of a Wi tribe LTE TDD site. Key findings include: throughput targets were achieved at near points for all sectors but not all far points; latency was higher than targets for some sectors; and coverage was verified to reach the expected distances of 600m, 350m, and 430m for each sector respectively. Dynamic parameters like SINR and modulation were also analyzed to validate site performance.
Recommended
TGS Arcis- Labrador Sea 2D
This document summarizes a multi-client 2D seismic survey in the Labrador Sea covering 26,676 km that was acquired between 2011-2012 and 2014. It details the acquisition parameters including the vessel, airgun source, streamer length and depth, sample interval, and nominal fold. It also outlines the processing sequence performed by PGS and TGS-Imaging including trace editing, velocity analysis, pre-stack time migration, and post-migration conditioning to output the final SEGY dataset. Finally, it lists the available time deliverables including field data, velocity analyses, stacks, and navigation data.
TGS Arcis- East Coast- Southeast Grand Banks
The document summarizes seismic acquisition and processing parameters for a marine seismic survey conducted off the coast of Newfoundland, Canada between July and October 2015. The survey covered 14,599 km using a 24-bit streamer towed behind the vessel Atlantic Explorer. Initial processing was done by PGS and included noise attenuation, wavefield separation, and extrapolation. Further processing will be done by Arcis to produce outputs such as pre-stack migrated gathers, raw and processed migrations, velocities, and angle stacks.
TGS Arcis- East Coast- Labrador Sea 2D deep basin
This document describes a 2D multi-client seismic survey conducted in the Labrador Sea between Canada and Greenland in 2013. It provides details on the acquisition parameters, processing flows, and deliverables for both time and depth processing of the 2,963 km of seismic data collected. The time processing involved noise attenuation, velocity analysis, migration, and stacking to produce interpretable seismic sections. Depth processing used tomographic inversion and isotropic and anisotropic Kirchhoff migration as well as reverse time migration on select lines to build accurate velocity models and produce pre-stack depth migrated volumes up to 30km deep.
TGS Arcis- East Coast- Nova Scotia Renaissance phase
This document describes a multi-client 2D seismic survey conducted off the coast of Nova Scotia, Canada. It details the acquisition parameters, processing workflows, and available deliverables for both time and depth processing of the 2518.3 km survey. Time processing included velocity analysis, multiple attenuation, migration, stacking, and filtering to produce processed time migrations. Depth processing utilized iterative velocity model building, Kirchhoff pre-stack depth migration, and reverse time migration to produce processed depth volume images of the subsurface geology including sediment, salt, and subsalt structures.
IEEE Young Professionals Webinar on 6/09/2016: NASA GSFC's WISM Radiometer wi...
NASA GSFC is developing a Wideband Instrument for Snow Measurement (WISM) and has teamed up with investigators from the Harris Corp., NASA Glenn Research Center, University of Washington (UWA), Boise State University (BSU), and Nuvotronics Corp. to achieve this task. WISM encompasses a suite of instruments, consisting of a Lidar, Synthetic Aperture Radar and Radiometer, with capability to perform snow parameter measurements across multiple frequency bands. NASA GSFC’s Role in this project is primarily to develop the Radiometer. Therefore, this work presents the prior accomplishments, current status and path forward for GSFC's WISM Radiometer.
Oil and Gas Imaging, pumpsandpipesmdhc
Seismic imaging is used in oil and gas exploration to determine reservoir geometry and properties by analyzing acoustic echo reflections from subsurface layers. It is a two-step process that first uses varying source-receiver separations and tomography to determine subsurface velocities, and then backpropagates measured sound waves to form images. Advancements include more accurate imaging algorithms, improved velocity modeling tools, and increased data acquisition apertures, but challenges remain such as illumination limitations, complex velocity models, imaging steep dips and structures, and issues of resolution and noise.
TH1.L10.1: TANDEM-X: SCIENTIFIC CONTRIBUTIONS
TanDEM-X is a satellite mission to generate a global digital elevation model. The document provides an overview of the TanDEM-X mission status and scientific contributions since its launch in June 2010. It describes the mission objectives to generate DEMs, measure surface velocities, and demonstrate new SAR techniques. The commissioning phase involves calibration and testing of the interferometric modes in monostatic and bistatic configurations. Initial data takes show successful interferometry and polarimetric SAR imaging capabilities. The document outlines the data acquisition plan and opportunities for scientific proposals and experimental products.
Khi 054 revised dt report
This report summarizes the results of a single site verification test of a Wi tribe LTE TDD site. Key findings include: throughput targets were achieved at near points for all sectors but not all far points; latency was higher than targets for some sectors; and coverage was verified to reach the expected distances of 600m, 350m, and 430m for each sector respectively. Dynamic parameters like SINR and modulation were also analyzed to validate site performance.
Implementing parallel evolutionary algorithms in concurrent and functional pa...
The document discusses implementing parallel evolutionary algorithms in concurrent and functional programming paradigms. It introduces new trends in parallel genetic algorithms (pGAs) involving new parallel platforms and unexplored software platforms. It then models pGAs components, compares languages like Clojure, Erlang and Scala, and provides samples of implementing island models in each language. It presents results of experiments showing Scala had the best performance. The conclusion is that functional-concurrent languages allow simple implementation of hybrid parallel genetic algorithms and their built-in concurrency makes them a parallel platform. Scala performed best while Erlang showed good scalability.
Khi 113 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) The site achieved its throughput targets, with sector averages of 68.7-78.8 Mbps downlink and 4.0-9.5 Mbps uplink.
2) Latency was below targets, averaging 40-48 ms.
3) Dynamic KPIs like handover and drop call rates met their targets.
4) Coverage maps show the site provides good azimuthal coverage through its three sectors.
Khi 117 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project site. Key findings include:
1) Throughput testing achieved the target values for all three sectors at both near and far points.
2) Latency and call setup success rates met the specified thresholds.
3) Coverage maps and plots show the site achieves maximum coverage of the surrounding area through optimal antenna placement and tilts.
4) The site meets all key performance indicators for throughput, latency, and call setup success.
Khi 164 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector A achieving up to 74.1 Mbps downlink.
2) Average downlink throughput was lower at far points, ranging from 26.3 to 32.2 Mbps.
3) Latency and KPI targets for call setup and handoff success were met.
4) Coverage maps show sectors achieve maximum coverage area with antenna azimuths of 30, 150, and 270 degrees.
Khi 087 revised dt report
This document summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, but not all far points.
2) Latency was below targets for all sectors.
3) Dynamic KPI targets for setup success and drop rates were met.
4) Coverage maps show sectors achieve maximum coverage area with some null spots.
Khi 061 revised dt report
This report summarizes the results of a single site verification test of a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector C achieving the highest throughput.
2) Throughput was lower at far points as expected due to signal degradation with distance.
3) Latency was below targets for all sectors.
4) The site configuration achieved maximum coverage of routes with sectors oriented at 30, 150, 270 degrees.
Khi 078 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput testing achieved the target values for all three sectors at near points and exceeded targets for some sectors at far points.
2) Latency was below targets for most tests.
3) Coverage maps show the three sectors together maximize the area covered by the site with some null areas.
Khi 156 revised dt report
This report summarizes the single site verification test results for site KHI 156. Key results include:
1) Throughput targets were achieved at near points for all sectors, averaging 64.8-84.8 Mbps downlink and 8.5-10.8 Mbps uplink.
2) Downlink and uplink throughput dropped off significantly at far points as expected, averaging 25.6-31.7 Mbps and 1.1-2.4 Mbps respectively.
3) Latency metrics met targets, with pings under 50ms for 32 byte packets and under 60ms for 128 byte packets.
4) Coverage maps show sectors achieve over 600 square meters of coverage each with
OPHA Supplemental Site Investigation for Groundwater
Presentation to the Moffett Restoration Advisory Board November 18, 2010: Former Orion Park Housing Area (OPHA) Supplemental Site Investigation for Groundwater
Khi 151 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, but not all far points.
2) Latency was below targets for most tests.
3) Coverage from the three sectors was able to achieve a maximum route with minimal null areas.
Khi 150 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with averages of 68.1-77.7 Mbps downlink and 7.6-10.4 Mbps uplink.
2) Far point throughput was lower as expected but still met requirements, with averages of 30.4-39.6 Mbps downlink and 2-9.6 Mbps uplink.
3) Latency was below targets, with averages of 46-548 ms for 32 byte and 46 ms for 128 byte tests.
4) KPI targets for R
Khi 142 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector A achieving the highest near point throughput.
2) Coverage was maximized by setting antenna azimuths to 40, 150, and 270 degrees.
3) The site achieved its maximum potential throughput and covered a total area of 1680 square meters, with minimal null areas.
Khi 186 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors but not all far points.
2) Latency was higher than the target of 35ms.
3) Dynamic KPI targets for RRC setup success, ERAB setup success, and handoff success were met.
3178_IGARSS11.ppt
The document discusses the NASA Soil Moisture Active Passive (SMAP) mission, which is scheduled for launch in 2014. SMAP will map global soil moisture and freeze/thaw state from space to further understanding of the water, energy, and carbon cycles. The mission involves an L-band radar and radiometer to provide soil moisture measurements. Algorithms are being developed and tested to generate products like soil moisture maps from the radar-radiometer data. Validation efforts and working groups are helping prepare for the mission.
Khi 022 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key results include:
1) The site achieved its throughput targets of 75Mbps and 6.5Mbps for downlink and uplink near the site.
2) Latency was higher than the target of 35ms, measuring up to 118ms for some sectors.
3) Coverage maps show that the site provides maximum coverage of the surrounding area with its antenna configuration.
The Use of WSR_88D radar data at NCEP_2015_AMS_20141222
The document discusses the use of WSR-88D radar data at the National Centers for Environmental Prediction (NCEP). It outlines how radar data is processed at NCEP, including quality control checks on radial winds and reflectivity and generating mosaics. A new Velocity-Azimuth Display wind profile is created with higher resolution than the old method. Radar data is assimilated using a hybrid variational-ensemble system, directly analyzing radial winds and using reflectivity for cloud and latent heat analyses to improve forecasts. Verification shows the new VAD winds and reflectivity assimilation improve analyses and precipitation forecasts. Future plans include improving radar data quality control and combining with the Multi-radar Multi-sensor System.
DIAL
The ANGEL Service uses a laser-based technology called DIAL (Differential Absorption LIDAR) deployed from aircraft to detect and measure natural gas pipeline leaks and facility emissions over large areas more quickly than traditional methods. The service provides high-resolution aerial imagery and digital video to map pipeline routes and pinpoint leak locations for clients to audit in their GIS systems. It has been tested successfully with numerous pipeline operators and government agencies. The technology allows non-intrusive, remote surveys over varying terrain and weather to identify leaks and monitor corridors more efficiently.
FR1.L09.2 - ONBOARD RADAR PROCESSING CONCEPTS FOR THE DESDYNI MISSION
The document discusses onboard radar processing concepts for the DESDynI Earth observation mission. It describes how onboard processing can enable more frequent observations than currently feasible by reducing the volume of downlinked data through techniques like SAR image formation and compression. Onboard processing could generate targeted science products to enable rapid response to natural hazards. Examples of potential onboard products discussed include forest fire extent, forest fuel load, earthquake damage assessment, glacier melting, and vegetation classification.
Khi 316 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) The site achieved its throughput targets, with sector C reaching maximums of 56.4 Mbps downlink and 6.8 Mbps uplink.
2) Latency tests showed results under 40ms meeting the target of 35ms or less.
3) Coverage maps indicate the site's three sectors achieve good route coverage with their antenna placements.
Khi 052 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector C achieving the highest throughput.
2) Latency was below targets.
3) Coverage was assessed to reach the desired radii of 450m for sectors A and B, and 600m for sector C.
4) The site configuration was found to provide maximum route coverage through its antenna placements.
TGS NSA- Freeport 3D
TGS-NOPEC Geophysical Company has acquired a 3D multi-client onshore seismic survey covering 470 square miles in eastern Ohio. The survey was acquired with vibrator trucks and dynamite sources along lines spaced 880 feet apart. Processing will include pre-stack time and depth migration to produce seismic images and velocity models. Deliverables will include pre-processed seismic data, pre-stack and post-stack migrated volumes, and associated velocity models. Optional products include available well logs from the area.
TGS NSA- Loyal 3D
This document provides information about a 3D seismic survey called the Loyal 3D located in Blaine, Kingfisher, and Canadian counties in Oklahoma. It includes details on the acquisition parameters such as source type, receiver and source line spacing, bin size, record length, and sample rate. It also describes the pre-processing and imaging workflows to be applied including velocity analysis, multiple attenuation, stacking, and optional depth imaging. Finally, it lists the deliverables and contact information for the project.
More Related Content
What's hot
Implementing parallel evolutionary algorithms in concurrent and functional pa...
The document discusses implementing parallel evolutionary algorithms in concurrent and functional programming paradigms. It introduces new trends in parallel genetic algorithms (pGAs) involving new parallel platforms and unexplored software platforms. It then models pGAs components, compares languages like Clojure, Erlang and Scala, and provides samples of implementing island models in each language. It presents results of experiments showing Scala had the best performance. The conclusion is that functional-concurrent languages allow simple implementation of hybrid parallel genetic algorithms and their built-in concurrency makes them a parallel platform. Scala performed best while Erlang showed good scalability.
Khi 113 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) The site achieved its throughput targets, with sector averages of 68.7-78.8 Mbps downlink and 4.0-9.5 Mbps uplink.
2) Latency was below targets, averaging 40-48 ms.
3) Dynamic KPIs like handover and drop call rates met their targets.
4) Coverage maps show the site provides good azimuthal coverage through its three sectors.
Khi 117 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project site. Key findings include:
1) Throughput testing achieved the target values for all three sectors at both near and far points.
2) Latency and call setup success rates met the specified thresholds.
3) Coverage maps and plots show the site achieves maximum coverage of the surrounding area through optimal antenna placement and tilts.
4) The site meets all key performance indicators for throughput, latency, and call setup success.
Khi 164 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector A achieving up to 74.1 Mbps downlink.
2) Average downlink throughput was lower at far points, ranging from 26.3 to 32.2 Mbps.
3) Latency and KPI targets for call setup and handoff success were met.
4) Coverage maps show sectors achieve maximum coverage area with antenna azimuths of 30, 150, and 270 degrees.
Khi 087 revised dt report
This document summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, but not all far points.
2) Latency was below targets for all sectors.
3) Dynamic KPI targets for setup success and drop rates were met.
4) Coverage maps show sectors achieve maximum coverage area with some null spots.
Khi 061 revised dt report
This report summarizes the results of a single site verification test of a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector C achieving the highest throughput.
2) Throughput was lower at far points as expected due to signal degradation with distance.
3) Latency was below targets for all sectors.
4) The site configuration achieved maximum coverage of routes with sectors oriented at 30, 150, 270 degrees.
Khi 078 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput testing achieved the target values for all three sectors at near points and exceeded targets for some sectors at far points.
2) Latency was below targets for most tests.
3) Coverage maps show the three sectors together maximize the area covered by the site with some null areas.
Khi 156 revised dt report
This report summarizes the single site verification test results for site KHI 156. Key results include:
1) Throughput targets were achieved at near points for all sectors, averaging 64.8-84.8 Mbps downlink and 8.5-10.8 Mbps uplink.
2) Downlink and uplink throughput dropped off significantly at far points as expected, averaging 25.6-31.7 Mbps and 1.1-2.4 Mbps respectively.
3) Latency metrics met targets, with pings under 50ms for 32 byte packets and under 60ms for 128 byte packets.
4) Coverage maps show sectors achieve over 600 square meters of coverage each with
OPHA Supplemental Site Investigation for Groundwater
Presentation to the Moffett Restoration Advisory Board November 18, 2010: Former Orion Park Housing Area (OPHA) Supplemental Site Investigation for Groundwater
Khi 151 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, but not all far points.
2) Latency was below targets for most tests.
3) Coverage from the three sectors was able to achieve a maximum route with minimal null areas.
Khi 150 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with averages of 68.1-77.7 Mbps downlink and 7.6-10.4 Mbps uplink.
2) Far point throughput was lower as expected but still met requirements, with averages of 30.4-39.6 Mbps downlink and 2-9.6 Mbps uplink.
3) Latency was below targets, with averages of 46-548 ms for 32 byte and 46 ms for 128 byte tests.
4) KPI targets for R
Khi 142 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector A achieving the highest near point throughput.
2) Coverage was maximized by setting antenna azimuths to 40, 150, and 270 degrees.
3) The site achieved its maximum potential throughput and covered a total area of 1680 square meters, with minimal null areas.
Khi 186 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors but not all far points.
2) Latency was higher than the target of 35ms.
3) Dynamic KPI targets for RRC setup success, ERAB setup success, and handoff success were met.
3178_IGARSS11.ppt
The document discusses the NASA Soil Moisture Active Passive (SMAP) mission, which is scheduled for launch in 2014. SMAP will map global soil moisture and freeze/thaw state from space to further understanding of the water, energy, and carbon cycles. The mission involves an L-band radar and radiometer to provide soil moisture measurements. Algorithms are being developed and tested to generate products like soil moisture maps from the radar-radiometer data. Validation efforts and working groups are helping prepare for the mission.
Khi 022 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key results include:
1) The site achieved its throughput targets of 75Mbps and 6.5Mbps for downlink and uplink near the site.
2) Latency was higher than the target of 35ms, measuring up to 118ms for some sectors.
3) Coverage maps show that the site provides maximum coverage of the surrounding area with its antenna configuration.
The Use of WSR_88D radar data at NCEP_2015_AMS_20141222
The document discusses the use of WSR-88D radar data at the National Centers for Environmental Prediction (NCEP). It outlines how radar data is processed at NCEP, including quality control checks on radial winds and reflectivity and generating mosaics. A new Velocity-Azimuth Display wind profile is created with higher resolution than the old method. Radar data is assimilated using a hybrid variational-ensemble system, directly analyzing radial winds and using reflectivity for cloud and latent heat analyses to improve forecasts. Verification shows the new VAD winds and reflectivity assimilation improve analyses and precipitation forecasts. Future plans include improving radar data quality control and combining with the Multi-radar Multi-sensor System.
DIAL
The ANGEL Service uses a laser-based technology called DIAL (Differential Absorption LIDAR) deployed from aircraft to detect and measure natural gas pipeline leaks and facility emissions over large areas more quickly than traditional methods. The service provides high-resolution aerial imagery and digital video to map pipeline routes and pinpoint leak locations for clients to audit in their GIS systems. It has been tested successfully with numerous pipeline operators and government agencies. The technology allows non-intrusive, remote surveys over varying terrain and weather to identify leaks and monitor corridors more efficiently.
FR1.L09.2 - ONBOARD RADAR PROCESSING CONCEPTS FOR THE DESDYNI MISSION
The document discusses onboard radar processing concepts for the DESDynI Earth observation mission. It describes how onboard processing can enable more frequent observations than currently feasible by reducing the volume of downlinked data through techniques like SAR image formation and compression. Onboard processing could generate targeted science products to enable rapid response to natural hazards. Examples of potential onboard products discussed include forest fire extent, forest fuel load, earthquake damage assessment, glacier melting, and vegetation classification.
Khi 316 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) The site achieved its throughput targets, with sector C reaching maximums of 56.4 Mbps downlink and 6.8 Mbps uplink.
2) Latency tests showed results under 40ms meeting the target of 35ms or less.
3) Coverage maps indicate the site's three sectors achieve good route coverage with their antenna placements.
Khi 052 revised dt report
This report summarizes the results of a single site verification test for a Wi tribe LTE TDD project. Key findings include:
1) Throughput targets were met or exceeded at near points for all sectors, with sector C achieving the highest throughput.
2) Latency was below targets.
3) Coverage was assessed to reach the desired radii of 450m for sectors A and B, and 600m for sector C.
4) The site configuration was found to provide maximum route coverage through its antenna placements.
What's hot (20)
Implementing parallel evolutionary algorithms in concurrent and functional pa...
Implementing parallel evolutionary algorithms in concurrent and functional pa...
OPHA Supplemental Site Investigation for Groundwater
OPHA Supplemental Site Investigation for Groundwater
The Use of WSR_88D radar data at NCEP_2015_AMS_20141222
The Use of WSR_88D radar data at NCEP_2015_AMS_20141222
FR1.L09.2 - ONBOARD RADAR PROCESSING CONCEPTS FOR THE DESDYNI MISSION
FR1.L09.2 - ONBOARD RADAR PROCESSING CONCEPTS FOR THE DESDYNI MISSION
Similar to TGS Arcis- East Coast- NE Newfoundland Flemish Pass
TGS NSA- Freeport 3D
TGS-NOPEC Geophysical Company has acquired a 3D multi-client onshore seismic survey covering 470 square miles in eastern Ohio. The survey was acquired with vibrator trucks and dynamite sources along lines spaced 880 feet apart. Processing will include pre-stack time and depth migration to produce seismic images and velocity models. Deliverables will include pre-processed seismic data, pre-stack and post-stack migrated volumes, and associated velocity models. Optional products include available well logs from the area.
TGS NSA- Loyal 3D
This document provides information about a 3D seismic survey called the Loyal 3D located in Blaine, Kingfisher, and Canadian counties in Oklahoma. It includes details on the acquisition parameters such as source type, receiver and source line spacing, bin size, record length, and sample rate. It also describes the pre-processing and imaging workflows to be applied including velocity analysis, multiple attenuation, stacking, and optional depth imaging. Finally, it lists the deliverables and contact information for the project.
TGS NSA- Firestone 3D
This document describes the acquisition and processing parameters for a 3D seismic survey called Firestone 3D conducted in Carroll and Columbiana Counties, Ohio. It details the acquisition geometry including receiver and source line spacing, bin size, record length, and maximum offset. It also provides an overview of the pre-processing, time imaging, and optional depth imaging workflows that were applied to the seismic data.
TGS NSA- Blanchard 3D
This document describes the acquisition and processing parameters for a multi-client 3D seismic survey covering 433 square miles in Grady and McClain Counties, Oklahoma. The survey utilized vibroseis and dynamite sources with receiver and source intervals of 220 feet. Processing included pre-stack time and depth migration, velocity analysis, multiple attenuation, and stacking to produce final processed time and depth volume deliverables. Optional products included the delivery of well log data.
TGS NSA- Waterford
This document provides information about a 3D seismic survey conducted in Washington County, Ohio, including acquisition parameters, pre-processing and imaging workflows, deliverables, and contact information for the survey company, TGS-NOPEC Geophysical Company. The survey covered 115 square miles with a receiver interval of 220 feet, source interval of 245.9 feet, and nominal fold of 120. Pre-processing included trace editing, velocity analysis, and migration, with optional depth imaging. Deliverables included preprocessed data, migration gathers and stacks, and velocity models.
NEON Airborne Operations
The document describes the NEON Airborne Observation Platform (AOP) which uses aircraft to collect remote sensing data at fine spatial scales. The AOP uses LiDAR, imaging spectrometers and cameras to measure ecosystem properties. It collects data across the United States at various NEON sites to characterize ecosystems and monitor long-term ecological change. The AOP has conducted test and calibration flights, as well as data collection flights in domains across the US to map areas like forest sites and wildfire burn scars.
CHC2020 medoune ndir_cidco_lidar_sonar_mapping
This document discusses sonar-lidar mapping of harbor facilities using an integrated sensor payload on a vessel platform. The payload includes multibeam echosounders, lidar, attitude and GPS sensors to create a 3D digital twin of the harbor. Data is captured and processed in real-time, achieving sub-centimeter accuracy and resolutions down to 1mm. Final deliverables include processed point clouds and thematic maps that can be used for infrastructure monitoring, degradation analysis, dredging planning and environmental risk assessment.
Ion 2013 azeem
1) Phase scintillation data from four GPS receivers in Alaska's CASES network showed significant scintillations correlated with auroral activity, with strongest scintillations near magnetic midnight.
2) Analysis of auroral emission and GPS phase scintillation data from specific dates revealed enhanced scintillations associated with brightening of red line auroral emissions.
3) Occurrence statistics showed weak scintillations have a clear diurnal variation while strongest scintillations are nighttime phenomena, with decreasing scintillation severity at lower latitudes.
Humanitarian Demining with Ultra Wide Band Ground Penetrating Radar
The document discusses background removal techniques for ground penetrating radar (GPR) used in landmine detection. It provides background on the global landmine issue and introduces GPR technology for humanitarian demining applications. The scope of the thesis is described as focusing on clutter removal techniques to extract target signals buried in background. Several background subtraction algorithms are analyzed, including high pass filter, exponential averaging, linear prediction, and moving average. The techniques are tested on sample data scenarios and their performance at removing background is evaluated to isolate buried landmine targets.
igarss_2011_cfosat.ppt
The CFOSAT mission is a joint China-France satellite mission launching in 2015 to measure oceanic wind and wave spectra globally using new scatterometer instruments. The mission aims to improve wind and wave forecasts through simultaneous wind and wave measurements from its SWIM wave scatterometer and SCAT wind scatterometer. CFOSAT will provide directional wave spectra and wind vectors over the global oceans to advance understanding of ocean-atmosphere processes.
igarss11swot-vadon-callahan-psc-s3.110725.pptx
The document describes the SWOT (Surface Water and Ocean Topography) mission and ground system. SWOT will use Ka-band radar interferometry to measure water levels over oceans and inland water bodies. It presents the mission phases from launch to science operations. The ground system will acquire KaRIN instrument data at rates over 600 Mbps and generate large data products like hydrology maps at 50m resolution. Processing will involve geolocation, corrections, and derivation of geophysical parameters from the radar data. The large data volumes and dual ocean/hydrology goals pose challenges for the SWOT ground system.
1 IGARSS 2011 JPSS Monday Goldberg.pptx
JPSS will continue critical environmental monitoring from polar orbiting satellites by maintaining observations from sensors like CrIS, ATMS, VIIRS, OMPS, and CERES. The NPP satellite will fly the first set of these instruments in order to ensure continuity of data until JPSS-1 is launched. JPSS will provide global observations for weather forecasting and climate monitoring through environmental data records from multiple instruments measuring atmospheric, oceanic, and land surface variables. Continuity of long term data sets is essential for detecting climate change and improving weather prediction.
Monitoring measuring and verification, Gonzalo Zambrano, University of Alberta
This document summarizes Gonzalo Zambrano's presentation on monitoring, measuring and verification (MMV) for CO2 storage projects. It discusses the Aquistore project, which aims to demonstrate safe CO2 storage in deep saline formations in Alberta, Canada. The Aquistore project involves injecting CO2 into a saline formation over 3 km underground and uses various surface and downhole techniques to monitor the CO2 plume and ensure containment. These include 3D and time-lapse seismic surveys, a permanent seismic array, tiltmeters, GPS, and soil gas and groundwater monitoring.
2_prats_IGARSS2011_distributed_imaging_v4.ppt
The document discusses experiments performed using TerraSAR-X (TSX) and TanDEM-X (TDX) satellites to demonstrate capabilities of distributed imaging with bi-static SAR systems. Three key experiments are described:
1) Super resolution in range was achieved through step-frequency acquisitions from both satellites, combining the signals coherently to increase range resolution beyond the individual satellite limitations.
2) Super resolution in azimuth used the satellites' Doppler offsets to synthesize a signal with twice the azimuth resolution of either satellite alone.
3) Quad-polarized images were synthesized from dual-polarized acquisitions from each satellite, using one polarization for imaging and the other for calibration.
Pasadena Poster Fa15
This document summarizes research on using signals from high definition television (HDTV) towers for spacecraft navigation. Key points:
1) HDTV signals have a well-defined structure that allows extraction of navigation data like pseudorange and range rate.
2) Correlating received signals to known patterns in the signal's frame synchronization segments provides measurements for determining signal timing and Doppler shift.
3) Initial results show HDTV signals can support navigation for spacecraft as far away as the Moon, at very low cost compared to existing deep space navigation networks.
4) Future work involves further characterizing measurement accuracy and leveraging signals from HDTV networks worldwide for global navigation coverage.
ground penetration rader
The document provides an introduction to ground penetrating radar (GPR), including its history, how it works, equipment used, data collection and processing techniques, and applications in archaeology. GPR transmits radar pulses into the ground and receives reflections, allowing buried features to be imaged without excavation. Key developments included early ice thickness measurements in the 1920s-1950s, military applications in WWII, and increasing use in archaeology from the 1970s onward as computers improved data processing capabilities. The document outlines factors affecting radar wave propagation and reflections, and details the workflow from GPR survey to interpretation of time slice maps and 3D models to identify buried structures and features.
Centennial Talk Hydrates
The document discusses technical challenges in evaluating deep-water methane hydrate as an energy resource. It describes hydrate formation and characteristics, methods for seismic imaging of hydrate deposits, and challenges in accurately assessing resource size and developing production technologies due to uncertainties in deposit morphology, velocity modeling, and hydrate stability. Key unknowns remain around deposit characteristics and how to extract hydrate while maintaining stability.
IGARSS_DESDynI_2011.pptx
1) The document summarizes an airborne demonstration of SweepSAR technology at Ka-band using an array-fed reflector and digital beamforming with 8 receive beams.
2) The demonstration was successful, with over 200GB of data collected across two test flights. Beamforming algorithms were able to generate mosaicked imagery.
3) The results validate the SweepSAR concept and provide evidence that the system architecture planned for DESDynI is feasible for achieving wide swaths with fine azimuth resolution.
Digital processing of today’s radar signals
The document discusses high resolution surveillance radars, including PILOT radar which was the first marine navigation radar, Tarsier radar which can detect a 2-inch bolt at 1 mile, and trials using Cheddar reservoir. It covers recent advances in harbor and coastal surveillance radars, noting requirements for detecting small targets in sea clutter. Future radars may operate at 24GHz with 1.5m range resolution and very good clutter rejection using coherent processing.
DSD-INT 2016 Hydrodynamic modeling and resource-device suitability analysis o...
Presentation by Oliver Dan de Luna, University of the Philippines - Marine Science Institute, Philippines, at the Delft3D User Days during Delft Software Days 2016 on Tuesday, 1 November 2016, Delft.
Similar to TGS Arcis- East Coast- NE Newfoundland Flemish Pass (20)
Humanitarian Demining with Ultra Wide Band Ground Penetrating Radar
Humanitarian Demining with Ultra Wide Band Ground Penetrating Radar
Monitoring measuring and verification, Gonzalo Zambrano, University of Alberta
Monitoring measuring and verification, Gonzalo Zambrano, University of Alberta
DSD-INT 2016 Hydrodynamic modeling and resource-device suitability analysis o...
DSD-INT 2016 Hydrodynamic modeling and resource-device suitability analysis o...
More from TGS
Basin Analytics, Stay Connected to the Data
Basin intelligence for informative and strategic decision making and analysis.
With TGS Analytics, you gain deep basin intelligence for informative and strategic decision making along the project value chain. Our basin intelligence solution provides analytical partnerships to close any research gaps so you can make better informed decisions.
We differentiate our solution by bridging the gap between subsurface geologic data and interpretation with strategic analysis of production capabilities. Staying connected to the data allows for fast and transparent insights from a top-down view to each individual well.
Our tool integrates into your workflow allowing you to gain quick knowledge or perform individual analytics for your AOI.
TGS Imaging Technology update SEG 2016
TGS provides seismic imaging services with a global reach using proprietary processing techniques. They operate a large supercomputer center with over 30 petaflops of computing power and robust data security. TGS offers a full range of 2D and 3D imaging services from field data processing to final migration and inversion, utilizing the latest technologies like broadband processing, high resolution tomography, anisotropic imaging, full waveform inversion, and least squares RTM to improve subsalt imaging.
TGS Bain Geo
TGS and Bain Geophysical have teamed up to provide interpretation of TGS's Gigante survey data over the Gulf of Mexico, including depth to basement, crustal thickness, and basement terranes. The project will have three phases: determining crustal thickness and boundaries between continental and oceanic crust; mapping depth to magnetic basement; and identifying basement terranes through magnetic inversion. Deliverables will include grids, images, and shapefiles of the results as well as a summary report. Early participants in licensing the data will receive preferred pricing.
TGS-GPSI-Interpretation Products
TGS provides geological products and services to support oil and gas exploration, including basin modeling, play analysis, and seismic interpretation. They have developed basin temperature models for major North American basins using bottom hole temperature data. TGS also offers formation top correlations, play fairway analysis identifying reservoir-seal-source combinations, prospectivity mapping, and a facies map browser application to view sequence stratigraphy results. These interpretation products help companies better understand basin geology and identify exploration opportunities.
TGS GPS Overview
TGS provides geological data products and services to the oil and gas industry, including the largest digital well log library and data integration services. They offer well log data, interpretation products, and beyond well log data like mud data and directional surveys. TGS aims to be the right choice for all geological data needs through their expertise, experience, and large data library.
TGS AP - Australia 3Ds Flyer
TGS has acquired over 41,000 km2 of 3D seismic data offshore Northwest Australia consisting of several named surveys totaling various km2 amounts, with the largest being Mary Rose at 8,800 km2. The Nerites MC3D survey in the Ceduna Basin of the Great Australian Bight is TGS' largest Asia Pacific survey at 21,500 km2, with Season 1 data of 8,500 km2 now finalized and Season 2 fast track data of 13,000 km2 also now available. Contact information is provided for inquiries.
TGS AP - New Zealand Flyer
TGS has recently completed a new 17,500 km 2D seismic survey offshore Northwest New Zealand covering the Reinga, Northland and Taranaki basins. The data was acquired using a 10 km streamer and processed using TGS' proprietary Clari-FiTM broadband technology. Acquisition was finished in Q2 2015 and processing was completed ahead of schedule in time for the current bid round. TGS has also reprocessed existing 2D data in the Reinga Basin using Clari-FiTM, which enables high quality broadband data to be generated from conventional data at a lower cost than new acquisition.
TGS GPS - APPA Project Brochure
The document discusses a project by the African Petroleum Producers Association (APPA) to harmonize the stratigraphic nomenclature of sedimentary basins across several African countries. The project involves compiling and correlating geological and geophysical data from APPA member countries to build a revised geological model and harmonized nomenclature for three zones: the Intracratonic Zone, Gulf of Guinea Zone, and West Africa Zone. Key deliverables will include study reports, datasets, and utilizing TGS's Facies Map Browser platform to deliver the project data. Associated studies on topics like petrophysics, sequence stratigraphy, and play fairway analysis are also planned.
TGS GPS- Labrador Interpretation
This document summarizes a sequence stratigraphic interpretation and play fairway analysis project conducted by TGS in the Labrador Sea utilizing seismic and well data. The project aims to provide a geologic model of basin deposition over time, delineate reservoir and seal distributions related to tectonic activity, and identify prospective hydrocarbon leads. TGS integrated well log and seismic data to define a sequence stratigraphy framework and map 14 depositional sequences. Deliverables include interpreted seismic and well data, depositional environment maps, and structural maps. Benefits include a foundational exploration tool, shortened exploration cycle time, insights into regional deposition, and reduced risk through delineating key petroleum system elements.
TGS GPS- Hi GBE Regional Velocity Model UK
TGS, in partnership with First Geo, announces hiQbeTM, a new regional high resolution geologically consistent velocity model for the UK North Sea produced using First Geo's proprietary technology. The model combines hundreds of stacking velocities and well check shot data into a consistent velocity cube covering the Southern, Central, and Northern regions of the North Sea. HiQbeTM delivers excellent data management, proven processing methods, regional coverage, and annual updates to benefit depth conversions, mapping of prospects, and a consistent methodology across studies.
TGS GPS- Facies Map Browser - Barents Sea
The TGS Facies Map Browser contains well data for 97 exploration and appraisal wells in the Barents Sea, including logs, lithology, depositional environment, and other data. There are 24 gross depositional environment maps that cover Tertiary to Carboniferous time periods. In 2014, TGS updated the Facies Map Browser through stratigraphic analysis, well data quality control, updating structure maps and fault lines, and adding a new petroleum systems events chart.
TGS GPS- East Coast Canada Well Logs
TGS offers the industry's only comprehensive well log package for offshore Canada. The package contains high quality advanced well logs for East Coast Canada that have been quality controlled, edited, normalized and formatted into their trusted LAS Plus format for immediate import into interpretation software. TGS's LAS Plus format provides additional processing and quality control compared to the standard LAS format.
TGS GPS- DSDP Deepwater Borehole Data
TGS has created a database of borehole data from deepwater drilling projects around the world. The database contains over 3,000 boreholes with information like location, depth, lithology, and log data where available. TGS processed and standardized the data to make it more accessible and useful for the oil and gas industry. The database is delivered through a GIS interface and includes composite logs, core descriptions, and other documents for each borehole of interest.
TGS GPS- Barents Sea Post Well Analysis 2014
This document summarizes a post well analysis (PWA) conducted on 80 exploration wells drilled in the Norwegian part of the Barents Sea. The PWA analyzed factors influencing the presence of reservoirs, seals, traps, hydrocarbon charge and retention for each well. Data sources included well logs, reports, facies maps, petrophysical data, geochemical data and seismic data. The PWA was delivered as an ArcGIS geodatabase containing spatial data and analyses to help exploration companies learn from past well successes and failures to reduce the risk of future dry holes.
TGS GPS- Post Well Analysis - mid Norway
This document summarizes a post well analysis project by TGS to analyze 80 exploration wells drilled in the Norwegian Sea. The analysis will evaluate factors related to the presence of reservoirs, traps, seals, and hydrocarbon charge. Data will be compiled in a GIS-based database and visualization tools to allow querying and analysis of patterns in well successes and failures. The goal is to improve understanding of the petroleum systems and reduce future drilling risks.
TGS GPS- Post Well Analysis - Barents Sea
This document describes a post well analysis project by TGS-NOPEC Geophysical Company ASA to analyze 84 exploration wells drilled in the Norwegian part of the Barents Sea. The project involves extracting data on the reservoirs, traps, seals, hydrocarbons and charges from each well and storing it in a GIS-based database. This database will allow users to query and visualize parameters influencing hydrocarbon discoveries to improve understanding of the petroleum systems and reduce future drilling risks.
TGS GPS- Portugal well data
TGS offers comprehensive well data packages from 139 onshore and offshore wells in Portugal. Under an agreement with ENMC/UPEP, TGS can create value-added products from the well data but clients must license the underlying raw data directly from ENMC/UPEP. TGS supplies standardized log data, directional surveys, check shots, and mud curves that are accessible through their online LOG-LINE Plus portal or upon request. A detailed list of the 139 wells and a shapefile are also available.
TGS GPS - Petrophysics - Russian Barents
TGS has produced a petrophysical atlas covering 24 wells in the Russian Barents Sea, following the successful atlas of the Norwegian Barents Sea. The Russian atlas contains log data, core analysis including shale volume, porosity, water saturation, and lithology interpretation for reservoirs from the Late Triassic to Early Cretaceous epochs. The atlas report includes the methodology, individual well summaries with log plots, formation summaries, and an overall reservoir summation.
TGS GPS- Petrophysics - Norwegian Barents
This document provides a summary of petrophysical analyses that TGS has conducted for wells in the Barents Sea. It lists over 70 wells for which TGS has performed petrophysical evaluations, which include delivering environmentally corrected log data, shale/clay volume, reservoir and net pay characteristics, porosity, permeability where cored, connate water resistivity, water saturation, core data where available, pressure data where available, and a detailed report. The objective of the petrophysical evaluations is to apply a consistent methodology to well data to characterize the petrophysical properties of the formations.
TGS GPS- NE Newfoundland Interpretation
TGS has completed a sequence stratigraphic interpretation and play fairway analysis project for the Northeast Newfoundland Shelf utilizing new seismic survey data and well data. The project provides a geologic model of basin development over time, delineates the distribution of reservoirs and seals, and identifies prospective hydrocarbon leads. TGS interpreted well log data to define a sequence stratigraphic framework and mapped gross depositional environment maps for 21 sequences. The project benefits include a foundational exploration tool, shortened exploration cycle time, new insights into depositional environments, and reduced risk through delineating source, seal and reservoir distributions.
More from TGS (20)
Recently uploaded
Intelligence supported media monitoring in veterinary medicine
Media monitoring in veterinary medicien
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
The Modern Marketing Reckoner (MMR) is a comprehensive resource packed with POVs from 60+ industry leaders on how AI is transforming the 4 key pillars of marketing – product, place, price and promotions.
原版一比一多伦多大学毕业证(UofT毕业证书)如何办理
原版制作【微信:41543339】【多伦多大学毕业证(UofT毕业证书)】【微信:41543339】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
在线办理(英国UCA毕业证书)创意艺术大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(英国UCA毕业证书)创意艺术大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(harvard毕业证书）哈佛大学毕业证如何办理
一模一样【微信：A575476】【(harvard毕业证书）哈佛大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Build applications with generative AI on Google Cloud
We will explore Vertex AI - Model Garden powered experiences, we are going to learn more about the integration of these generative AI APIs. We are going to see in action what the Gemini family of generative models are for developers to build and deploy AI-driven applications. Vertex AI includes a suite of foundation models, these are referred to as the PaLM and Gemini family of generative ai models, and they come in different versions. We are going to cover how to use via API to: - execute prompts in text and chat - cover multimodal use cases with image prompts. - finetune and distill to improve knowledge domains - run function calls with foundation models to optimize them for specific tasks. At the end of the session, developers will understand how to innovate with generative AI and develop apps using the generative ai industry trends.
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
Embark on a captivating financial journey with 'Financial Odyssey,' our hackathon project. Delve deep into the past performance of two companies as we employ an array of financial statement analysis techniques. From ratio analysis to trend analysis, uncover insights crucial for informed decision-making in the dynamic world of finance."
原版一比一弗林德斯大学毕业证(Flinders毕业证书)如何办理
原版制作【微信:41543339】【弗林德斯大学毕业证(Flinders毕业证书)】【微信:41543339】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
End-to-end pipeline agility - Berlin Buzzwords 2024
We describe how we achieve high change agility in data engineering by eliminating the fear of breaking downstream data pipelines through end-to-end pipeline testing, and by using schema metaprogramming to safely eliminate boilerplate involved in changes that affect whole pipelines.
A quick poll on agility in changing pipelines from end to end indicated a huge span in capabilities. For the question "How long time does it take for all downstream pipelines to be adapted to an upstream change," the median response was 6 months, but some respondents could do it in less than a day. When quantitative data engineering differences between the best and worst are measured, the span is often 100x-1000x, sometimes even more.
A long time ago, we suffered at Spotify from fear of changing pipelines due to not knowing what the impact might be downstream. We made plans for a technical solution to test pipelines end-to-end to mitigate that fear, but the effort failed for cultural reasons. We eventually solved this challenge, but in a different context. In this presentation we will describe how we test full pipelines effectively by manipulating workflow orchestration, which enables us to make changes in pipelines without fear of breaking downstream.
Making schema changes that affect many jobs also involves a lot of toil and boilerplate. Using schema-on-read mitigates some of it, but has drawbacks since it makes it more difficult to detect errors early. We will describe how we have rejected this tradeoff by applying schema metaprogramming, eliminating boilerplate but keeping the protection of static typing, thereby further improving agility to quickly modify data pipelines without fear.
一比一原版兰加拉学院毕业证(Langara毕业证书)学历如何办理
原版办【微信号:BYZS866】【兰加拉学院毕业证(Langara毕业证书)】【微信号:BYZS866】《成绩单、外壳、雅思、offer、真实留信官方学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路）我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信号BYZS866】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信号BYZS866】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Orchestrating the Future: Navigating Today's Data Workflow Challenges with Ai...
Navigating today's data landscape isn't just about managing workflows; it's about strategically propelling your business forward. Apache Airflow has stood out as the benchmark in this arena, driving data orchestration forward since its early days. As we dive into the complexities of our current data-rich environment, where the sheer volume of information and its timely, accurate processing are crucial for AI and ML applications, the role of Airflow has never been more critical.
In my journey as the Senior Engineering Director and a pivotal member of Apache Airflow's Project Management Committee (PMC), I've witnessed Airflow transform data handling, making agility and insight the norm in an ever-evolving digital space. At Astronomer, our collaboration with leading AI & ML teams worldwide has not only tested but also proven Airflow's mettle in delivering data reliably and efficiently—data that now powers not just insights but core business functions.
This session is a deep dive into the essence of Airflow's success. We'll trace its evolution from a budding project to the backbone of data orchestration it is today, constantly adapting to meet the next wave of data challenges, including those brought on by Generative AI. It's this forward-thinking adaptability that keeps Airflow at the forefront of innovation, ready for whatever comes next.
The ever-growing demands of AI and ML applications have ushered in an era where sophisticated data management isn't a luxury—it's a necessity. Airflow's innate flexibility and scalability are what makes it indispensable in managing the intricate workflows of today, especially those involving Large Language Models (LLMs).
This talk isn't just a rundown of Airflow's features; it's about harnessing these capabilities to turn your data workflows into a strategic asset. Together, we'll explore how Airflow remains at the cutting edge of data orchestration, ensuring your organization is not just keeping pace but setting the pace in a data-driven future.
Session in https://budapestdata.hu/2024/04/kaxil-naik-astronomer-io/ | https://dataml24.sessionize.com/session/667627
一比一原版(Unimelb毕业证书)墨尔本大学毕业证如何办理
原版制作【微信:41543339】【(Unimelb毕业证书)墨尔本大学毕业证】【微信:41543339】《成绩单、外壳、雅思、offer、留信学历认证（永久存档/真实可查）》采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同进口机器一比一制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信41543339】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信41543339】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(UMN文凭证书)明尼苏达大学毕业证如何办理
毕业原版【微信:176555708】【(UMN毕业证书)明尼苏达大学毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Learn SQL from basic queries to Advance queries
Dive into the world of data analysis with our comprehensive guide on mastering SQL! This presentation offers a practical approach to learning SQL, focusing on real-world applications and hands-on practice. Whether you're a beginner or looking to sharpen your skills, this guide provides the tools you need to extract, analyze, and interpret data effectively.
Key Highlights:
Foundations of SQL: Understand the basics of SQL, including data retrieval, filtering, and aggregation.
Advanced Queries: Learn to craft complex queries to uncover deep insights from your data.
Data Trends and Patterns: Discover how to identify and interpret trends and patterns in your datasets.
Practical Examples: Follow step-by-step examples to apply SQL techniques in real-world scenarios.
Actionable Insights: Gain the skills to derive actionable insights that drive informed decision-making.
Join us on this journey to enhance your data analysis capabilities and unlock the full potential of SQL. Perfect for data enthusiasts, analysts, and anyone eager to harness the power of data!
#DataAnalysis #SQL #LearningSQL #DataInsights #DataScience #Analytics
一比一原版(UCSF文凭证书)旧金山分校毕业证如何办理
毕业原版【微信:176555708】【(UCSF毕业证书)旧金山分校毕业证】【微信:176555708】成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Harness the power of AI-backed reports, benchmarking and data analysis to predict trends and detect anomalies in your marketing efforts.
Peter Caputa, CEO at Databox, reveals how you can discover the strategies and tools to increase your growth rate (and margins!).
From metrics to track to data habits to pick up, enhance your reporting for powerful insights to improve your B2B tech company's marketing.
- - -
This is the webinar recording from the June 2024 HubSpot User Group (HUG) for B2B Technology USA.
Watch the video recording at https://youtu.be/5vjwGfPN9lw
Sign up for future HUG events at https://events.hubspot.com/b2b-technology-usa/
Recently uploaded (20)
Intelligence supported media monitoring in veterinary medicine
Intelligence supported media monitoring in veterinary medicine
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
4th Modern Marketing Reckoner by MMA Global India & Group M: 60+ experts on W...
A presentation that explain the Power BI Licensing
A presentation that explain the Power BI Licensing
DATA COMMS-NETWORKS YR2 lecture 08 NAT & CLOUD.docx
DATA COMMS-NETWORKS YR2 lecture 08 NAT & CLOUD.docx
Udemy_2024_Global_Learning_Skills_Trends_Report (1).pdf
Udemy_2024_Global_Learning_Skills_Trends_Report (1).pdf
Build applications with generative AI on Google Cloud
Build applications with generative AI on Google Cloud
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
"Financial Odyssey: Navigating Past Performance Through Diverse Analytical Lens"
End-to-end pipeline agility - Berlin Buzzwords 2024
End-to-end pipeline agility - Berlin Buzzwords 2024
Orchestrating the Future: Navigating Today's Data Workflow Challenges with Ai...
Orchestrating the Future: Navigating Today's Data Workflow Challenges with Ai...
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
Predictably Improve Your B2B Tech Company's Performance by Leveraging Data
TGS Arcis- East Coast- NE Newfoundland Flemish Pass
- 1. NE Newfoundland Flemish Pass MULTI-CLIENT 2D SURVEY; 38,780 km ACQUISITION PARAMETERS PSTM Processing Acquisition Date: Sept. 2012 – Nov. 2012, June 2013 – Nov. 2013 June 2014 - Vessel: Sanco Spirit Shooting Orientation: Strike and dip to the coastline Recording Instrument: Geostreamer 24 bit (GAS) Airgun Source: 4808 cubic inches Gun Depth: 9 meters Shotpoint Interval: 25 meters Group Interval: 12.5 meters Recording Channels: 648 Streamer Depth: 20 meters Streamer Length: 8100 meters Record Length: 10 seconds Sample Interval: 2 milliseconds Nominal Fold: 162 TIME PROCESSING SEQUENCE Data processing performed by PGS; Houston, TX USA SEG-D field data input Merge navigation information into trace headers Trace Editing Swell Noise Attenuation and Despike Linear Noise Attenuation Wavefield Separation & Extrapolation (Summation) SEGY output P-UP dataset (streamer redatumed to 9 m) TGS-Imaging; Calgary, Alberta Canada Input SEG-Y Designature Debubble and Zero phase Resample from 2ms to 4ms Shot Domain Noise Attenuation Tau-P Mute and Decon (as needed) 2D SRME Velocity analysis Residual Noise Attenuation Velocity analysis- Curved ray Kirchhoff pre stack time migration Residual Multiple Noise Attenuation Kirchhoff Curved ray pre stack time migration Radon Inverse NMO; automatic velocity analysis Amplitude recovery Mute and stack Post migration conditioning: F-X deconvolution, band-pass filter, scaling, stretched to depth Output SEGY AVAILABLE PRODUCTS Field data with navigation in the trace headers / shot ordered (648 traces/shot) Pre-migration final de-multiple CDP gathers (162 fold) Pre-stack time migrated CDP gathers without NMO (12.5m, 81 fold) Pre-stack time migrated CDP gathers with NMO (12.5m, 81 fold) Raw migration Processed migration Processed migration stretched to depth Angle Stacks Migration velocities (ASCII) Migration velocity trace volume – RMS Stacking velocities (SEGY & ASCII) Processed source-receiver navigation (UKOOA) Post stack navigation (UKOOA) Ship-borne gravity data August 14, 2014
- 2. Canada 40°W 45°W 45°W 50°W 50°W 55°N 55°N 50°N 50°N 45°N 45°N NE NEWFOUNDLAND FLEMISH PASS MULTI-CLIENT 2D SEISMIC SURVEY 0 25 50 100 150 200 Kilometers N:PublicGISArc Map DocumentsCanadaSpecSheetMapsNE Newfoundland_Flemish Pass 2014 (port).mxd August 14, 2014 Canada Greenland St. Pierre & Miquelon 2014 Acquisition: 16,020.91 km 2012-2013 Acquisition: 22,489.525 km