This document contains contact information and a resume for Rudy bin Mohd Salleh. It summarizes his educational background including incomplete studies in chemistry and ongoing studies in management. It also lists his employment history in various engineering and project management roles over the past 20 years, with responsibilities including overseeing projects, providing technical solutions to customers, and training new staff. Key achievements and completed projects are outlined for each role.

1. Rudy bin Mohd Salleh
Contact Info
Address : Blok N 03-03, Flat Sri Lanang, Jalan Harmonium,
Taman Desa Tebrau, 81100 Johor Bahru, Johor Darul Takzim, Malaysia.
Telephone No. : 013-7374261 (House)
Mobile No. : 019-667 6549
Email : rudykulaifornia@gmail.com
Personal Particulars
Age : 39 years
Date of Birth : 7 May 1976
Nationality : Malaysian
Gender : Male
Marital Status : Married
IC No. : 760507-01-6549
Permanent Residence : Malaysia
Educational Background
Primary/Secondary School/SPM/"O" Level
Field of Study : Others
Major : Pure Sciences
Institute/University : Sek. Men. Abd.Rahman Talib Kuantan, Malaysia
Grade : 2nd Grade
Graduation Date : Dec 1993
Higher Secondary/STPM/"A" Level/Pre-U
Field of Study : Chemistry
Major : Polymer Engineering ( SKR ) 1994
Institute/University : UTM Skudai Johor, Malaysia
Grade : Incomplete
Graduation Date : Incomplete
Higher Secondary/STPM/"A" Level/Pre-U
Field of Study : Management
Major : Executive Diploma in Technology Management
Institute/University : UTM Space Skudai Johor, Malaysia
Grade : On going

2. Employment History
Maju Perkasa Sdn Bhd
Position Title : Project Superintendence,
Position Level : Manager
Specialization : Engineering – Mechanical, Local Exhaust Systems, Engineering Air Pollution Control Equipment
Industry : Others
Duration : Feb 2010 – Till Know
Monthly Salary : RM 3550/++
Work Description:
Responsibility;
1. To setup new arrangement for company management.
2. To promote a range of process engineering product and services.
3. To provide technical presentation and solution to customer.
4. Handle inquiry quotation and after sales services.
5. Responsible to assist of new engineers, sales person and provide training to new technician.
6. Responsible to assist of practical student from IPT & IPTS.
7. Design Engineering work for LEV and Air Pollutions Control Equipment ( Scrubber, Duct Collector, Fume Hood,
Dry & Wet Spray Booths, VES Systems and Oil Mist Control Systems )
8. To conduct LEV briefing and Safety & Health’s
Achievements,
1. To conduct various project on process optimization and manage to reduce the running cost in the range 20% to
30%.
2. Implementation of the cost conservation project that save company about 25% to 30%.
Project completed;
1. PP Scrubber and PP ducting installation work at CFTC Pasir Gudang.
Pro. Value : XXk
2. Upgrading Black Chrome Plating Line with Installation of New Tank, Tank Skid, Piping Work and Electrical work
at Oriace Senai Johor.
Pro. Value : xxk
3. Installation GI Duct work for Ventilation Exhaust Systems at Pad Printing blok B Fujitsu Batu Pahat, Johor.
Pro. Value : xxk
4. Installation GI Duct work for Ventilation Exhaust Systems A & B at Pad Printing blok C Fujitsu Batu Pahat,
Johor.
Pro. Value : xxk
5. Installation New GI Duct work for Ventilation Exhaust Systems at Hot Deeping and Flux machines area Mitsumi
Parit Jalil, Batu Pahat, Johor.
Pro. Value : xxk
6. Supply, delivery and Install New Plating Line Systems with PP Tank, Tank Skid, walk away, Mechanical
Transportation, Safety Handrail, Piping work, pump systems, Control Panel and wiring work at Local Basic Gelang
Patah Johor.
Pro. Value : xxk
7. Supply, delivery and Install New Air Pollution Control Equipment mini scrubber with PP duct work for New Plating
Line at Local Basic Gelang Patah Johor.
Pro. Value : xxk

3. EF Engineering Sdn Bhd
Position Title : Superintendence
Position Level : Manager
Specialization : Engineering - Mechanical
Industry : Others
Duration : Feb 2007 – Sept 2010
Monthly Salary : RM 2850/++
Work Description:
Responsibility;
1. To setup new arrangement for company management.
2. To promote a range of process engineering product and services.
3. To provide technical presentation and solution to customer.
4. Handle inquiry quotation and after sales services.
5. Responsible to assist of new engineers and provide training to new technician.
Achievements,
1. To conduct various project on process optimization and manage to reduce the running cost in the range 20% to
30%.
2. Implementation of the cost conservation project that save company about 25% to 30%.
Project completed;
1. PP Scrubber and PP ducting installation work at CFTC Pasir Gudang.
Pro. Value : XXk
2. Upgrading Black Chrome Plating Line with Installation of New Tank, Tank Skid, Piping Work and Electrical work
at Oriace Senai Johor.
Pro. Value : xxk
3. Installation GI Duct work for Ventilation Exhaust Systems at Pad Printing blok B Fujitsu Batu Pahat, Johor.
Pro. Value : xxk
4. Installation GI Duct work for Ventilation Exhaust Systems A & B at Pad Printing blok C Fujitsu Batu Pahat,
Johor.
Pro. Value : xxk
5. Installation New GI Duct work for Ventilation Exhaust Systems at Hot Deeping and Flux machines area Mitsumi
Parit Jalil, Batu Pahat, Johor.
Pro. Value : xxk
6. Supply, delivery and Install New Plating Line Systems with PP Tank, Tank Skid, walk away, Mechanical
Transportation, Safety Handrail, Piping work, pump systems, Control Panel and wiring work at Local Basic Gelang
Patah Johor.
Pro. Value : xxk
7. Supply, delivery and Install New Air Pollution Control Equipment mini scrubber with PP duct work for New Plating
Line at Local Basic Gelang Patah Johor.
Pro. Value : xxk

4. Seven Star Hills Sdn Bhd
Position Title : Operation Superintendence
Position Level : Manager
Specialization : Engineering - Mechanical
Industry : Others
Duration : Mar 2006 - Jan 2007
Monthly Salary : RM 3300
Work Description:
Responsibility;
1. To setup new arrangement for company management.
2. To promote a range of process engineering product and services.
3. To provide technical presentation and solution to customer.
4. Handle inquiry quotation and after sales services.
5. Responsible to assist of new engineers and provide training to new technician.
Achievements,
1. To conduct various project on process optimization and manage to reduce the running cost in the range 20% to
30%.
2. Implementation of the cost conservation project that save company about 25% to 30%.
Project completed;
1. Exhaust scrubber upgrade c/w new m/s structure, new piping system and pump, 2nos of new FRP tank, M&E work
and DOE submission at See San Chemical Bhd Pasir Gudang.
Pro. Value : 96k
2. To supply labor, supervision, tools, equipment
and consumables to fabricate, erect and install various sizes of PP and PVDF piping inclusive of m/s support c/w
painting, u-bolts EPDM gasket, bolt and nuts for 24lines at New Plan Vance Bioenergy Sdn Bhd Pasir Gudang.
Pro. Value : 38k
3. To Fabricate and install 1unit of new heavy duty storages cabin c/w shutter door and roofing at WWTP Komag
USA Malaysia Sdn Pasir Gudang.
Pro. Value : 20k
4. To design, fabricate and install new set of m/s platform c/w cages ladder and handrail at roof top Komag USA
Malaysia Sdn Pasir Gudang.
Pro. Value : 17k
5. To design, fabricate and install new set of powder coated rack screw type c/w steel storages cages at Komag
USA Malaysia Sdn Pasir Gudang.
Pro. Value : 19k
6. Alum plan upgrade c/w new steam piping c/w jacketting and insulation, new PVC Sch 80 piping, new FRP piping c/w
2nos of m/s tank c/w internal 3mmthk rubber lining and FRP floor lining at See San Chemical Bhd Pasir Gudang.
Pro. Value : 30k

5. Hexagon Tower Sdn Bhd
Position Title : Project Supervisor
Position Level : Junior Executive
Specialization : Engineering - Others
Industry : Others
Duration : Oct 2001 - Mar 2006
Monthly Salary : RM 2360
Work Description:
Responsibility;
1. Take a lead role in sales process
a. Estimations
b. Budgetary
c. Quotations
2. Project
a. Work Planning ( reports, status, manpower & ect)
to make sure the job done on time
c. Commissioning ( asper clients aqquirry)
d. MRO ( make the continues job )
3. Drafting
a. On site sketching (utilities, piping for waste water treatment plant & productions, chem. piping, tank, chiller
piping, heat exhaust system & scrubber system & others.
b. Proposal for clients ( asper inquiry )
c. Autocad 2000 ( dwg. proposal, as-built dwg for project 2D & Isometric dwg. )
Job done;
1. Yamauchi WWTP Upgrade at Senai Johor.
Pro. Value : 500k
2. MFO pipeline at Stesen Janakuasa Sultan Iskandar Pasir Gudang Johor.
Pro. Value : 150k
3. Install of m/s i-beam, purlin c/w FRP coating, FRP wall, roof, cladding and FRP chequere plate to cover Alum Tank
at PUB Kota Tinggi.
Pro. Value : 200k
4. HVAC dunting upgrade c/w chill water piping at Nasional Semiconductor Melaka.
Pro. Value : 500k
5. Mould Room heat exhaust ducting upgrade at Nasional Semiconductor Melaka.
Pro. Value : 100k
6. Blue M-Oven heat Exhaust ducting upgrade c/w heat exchanger and chill water piping at Nasional Semiconductor
Melaka.
Pro. Value : 180k
7. Wafer bump FRP ducting upgrade to SS duct c/w internal ETFE coated at Nasional Semiconductor Melaka.
Pro. Value : 300k
8. New mini scrubber c/w ducting and M&E work and DOE submission at Marcon Rubber Alor Gajah Melaka.
Pro. Value : 76k

6. 9. M&E work at Indah Water WWTP at area Melaka Tengah, Alor Gajah and Jasin.
Pro. Value : 75k
10. Scrubber services at Kualiti Alam Negeri Sembilan.
Pro. Value : 28k
Aiwa Malaysia Sdn Bhd
Position Title : Store Keeper
Position Level : Junior Executive
Specialization : Quality Control/Assurance/Inspection
Industry : Consumer Products
Duration : Dec 2000 - Oct 2001
Monthly Salary : RM 1100
Work Description:
Responsibility,
1. Lead in material checklist & control
a. In/Out qty
b. Records (M.O, finished good, Mat. Received & ect)
c. Quality Assurance
d. Services to other department (delivery & receiving)
e. Manpower control daily
Fms Technic Sdn Bhd
Position Title : Project Supervisor
Position Level : Senior Executive
Specialization : Engineering - Electrical
Industry : Marine / Aquaculture
Duration : Apr 1995 - Dec 2000
Monthly Salary : RM 1950
Work Description:
Responsibility,
1. Take a lead role in sales process
a. Estimations
b. Budgetary
c. Quotations
2. Project
a. Budget costs
b. Work Planning (report, status, manpower & ect)
c. Troubleshooting
d. Commissioning
3. Drafting
a. On site sketching (accuracy 99%)
b. Autocad R14 & 2000

7. Project completed;
1. Project : Upgrading System 22kv Phase 2
Clients : TNBE Kluang
Durations : 2 yrs
Role : Team Leader
Team sizes : 80
Value : RM 3 800 000.00
2. Project : Upgrading SAVR 415v JB
Client : TNBD JB
Durations : 1 yrs
Role : Supervising
Team sizes : 50
Value : RM 150 000.00
3. Project : Upgrading 22kv Kota Tinggi
Clients : TNBE Kluang
Durations : 2 yrs
Role : Supervising
Team sizes : 30
4. Project : 24hr Breakdown JB, KT, Pasir Gudang & Gelang Patah Johor
Clients : TNBD JB
Durations : 1 yrs
Role : Team Leader
Team sizes : 15
Hitachi Cables Senai Johor
Position Title : Technicians
Position Level : Non-Executive
Specialization : Maintenance/Repair (Facilities & Machinery)
Industry : Consumer Products
Duration : Dec 1993 - Mar 1994
Monthly Salary : RM 800++
Work Description:
Responsibilities
1. Facilities maintenance & repair work
a. Chiller services and overhaul
b. Pump services and repairing
c. Maintenance work for extrusions & dies lathe machines.
d. Mechanical & electrical work
e. Report, checklist, Log book & Ect.

8. Top Skills
(Proficiency: Advanced - Highly experienced; Intermediate - Familiar with all the basic functionalities; Beginner -
Just started using or learning the skill)
Skill Years Proficiency
M&E works >12 Advanced
Pipe Fabrication PP, PVDF, Poly, PVC >5 Intermediate
AutoCad ( 2D, ISO and 3D modeling ) >12 Advanced
Drafting >12 Advanced
Duct work fabricator >12 Advanced
FRP work >4 Intermediate
Local Exhaust Design Systems >10 Advanced
Engineering Control Equipment Design Systems >10 Advanced
Languages
(Proficiency: 0=Poor - 10=Excellent)
Language Spoken Written
Bahasa Malaysia 10 10
English 6 6
Additional Info
Career and Objective;
To advance and developed skills in fields of engineering
Additional skills,
1. Good knowledge of AutoCad 2D, 3D & ISO ( Cad Design Systems – LEV, ACMV, HVAC, Scrubber, Tank & Piping
Work )
2. Experience in metal fabrication, duct work and others
3. Experience in FRP coated and fabrication
4. Local Exhaust Ventilation Design Engineering & Installation Work
( Scrubber Systems, Cyclone & Dust Collector Systems, Wet & Dry Spray Booths, Ventilation Exhaust Systems,
Fume Hood, Chimney Design & ect )
5. Liaise with Department of Safety & Health ( DOSH ) and Department of Environment ( DOE ) for Governmental
Approval
6. On site LEV Monitoring work ( trouble shooting systems, take reading face velocity, duct transport velocity, duct
Static pressure & ect )
7. Site Supervision ( Civil & Construction Supervisor and ACMV Asst. Installer ( Heavy Comm ) )

9. Course attended;
1. CIDB Green Card
2. NIOSH Safety for Construction Melaka
3. ISO 14001 ( AIWA )
4. Contractor Business Management Systems ( CIDB )2008
5. Application on Air Duct Design and Fan Selection ( CIDB & MACRA )
6. Safety & Health Officer certification ( NIOSH )
7. Construction Site Management ( CIDB )
8. Kursus Pengurusan Bisnes Kontraktor ( CIDB )2012
9. Schedule Waste Seminar ( DOE )
10. Finishing Work Sustainability, Selection & Application ( CIDB & ABM )
11. Executive Diploma in Technology Management ( UTM Space ) 2014/2016 ongoing
Personal Strengths;
1. Creative and resourceful
2. Leadership charisma
3. Sense of responsibility
4. Passion for continuous learning and personal growth
5. Highly motivated
6. Proven ability to work with staff at all level
Availability : After 20 May 2015
Miscellaneous
Expected Monthly Salary : RM3,600-RM4,500 (Negotiable)
Willing to Travel : Yes
Willing to Relocate : No
Possess Own Transport : Yes
References
Ahmad Bin Sahar
Relationship : Uncle
Position : Manager, Felda Holding Bhd
Tel : 012-7866 643
Email : hmdsahar@yahoo.com