The document is a cover letter and resume submitted by Mohd Raffie Mohamad Yidin for a job application. He has over 8 years of experience in oil and gas operations including as a Field Service Operator, Roughneck, and CNC Machinist. He is seeking a new position to further his career and is looking forward to hearing back from the company.

1. Mohd Raffie Mohamad Yidin,
234-4 Kampung Padang Lalang,
Binjai,
24000 Kemaman,
Terengganu Darul Iman.
Dear Sir,
Application for vacancy or related position in your organization.
I am pleased to submit my application for vacancy position in your organization.
Currently, I am a Field Service Operator (TCP) at Halliburton Wireline & Perforation and
experiencing with various type of zone perforation and bottom hole assembly type been used.
Before that, I was working as a Roughneck at GAIT III, UMW Petrodril (Malaysia) Sdn Bhd with 2
years and 1 month experience with intensive knowledge about work over operation and I also
was work as a Completion Tools and Casing Equipment Machinist and Mechanical Assembler
(Cementing tool, float & plug) at Halliburton manufacturing & technology Malaysia with 2 years
and 7 months total experience. This includes extensive experience in Assembly Cementing tool,
Plug set and floats equipment and machining variety of Completion Tools and Casing Equipment
sub assembly.
I believe I am the perfect candidate for the post. Here by me enclosed resume provides you with
further details of my personal details and qualifications.
I would be able to attend an interview at your convenience and looking forward to hear from you
soon. You can reach me at the above address and at phone mobile +6013-8645650 or email at
raffie197@gmail.com.
I am looking forward to hearing from you soon. Thank you
You’re faithfully
………………………………...
(Mohd Raffie Mohamad Yidin)

2. Mohd Raffie Bin Mohamad Yidin
Contact Info
Home Address : 234-4 Kg Padang Lalang Binjai, Kemaman 24000, Terengganu
No. Hand phone : +6013-8645650
Email Address : raffie197@gmail.com
Personal Particulars
Date of Birth : 10 August 1985
Nationality : Malaysia
Gender : Male
Marital Status : Married
No. IC : 850810-11-5207
Permanent Residence : Malaysia
Educational Background
Diploma
Field of Study : Engineering Mechanical
Major : Manufacturing
Institute/University : Sultan Abdul Halim Mu’adzam Shah Polytechnic, Malaysia
CGPA : 3.28/4.00
Graduation Date : July 2007
Professional Certificate
Field of Study : Engineering Mechanical
Major : Pure
Institute/University : Seberang Perai Pulau Pinang Polytechnic, Malaysia
CGPA : 3.30/4.00
Graduation Date : Jan 2006

3. Employment History
Halliburton Energy & Services Sdn Bhd
Position Title : Field Service Operator (TCP)
Position Level : Mid Career
Specialization : Wireline & Perforating - Oil/Gas
Industry : Oil and gas exploration
Duration : June 2012 – Present
Work Description:
Field Service Operator Responsibilities:
 Provide technical knowledge to other departments and clients on Tubing conveyed
perforation and related to perforation such as slickline perforation, wireline perforation
and coil tubing perforation either at the base or location.
 Maintain excellent communicate within the crews, supervisor and base coordinator either
at the base or on site, during tool box meeting and by sending rig report or call when at
location. Being able to work as a team or alone.
 Preparing equipment or tools at the base under minimum supervision or tight schedule
such as assemble perforation and downhole tools, preparing connection and doing make
up as per clients requisition and preparing equipment according to the job listing and the
T.C.P bottom hole assembly drawing. Recorded all material or tools that need to be used
such as tools, spare part kit, special tools assembly and updated the material checklist
based on non inventory equipment at the base or order new inventory equipment from
warehouse or other location via S.A.P. Preparing paperwork for load out equipment
included updated material list and send to logistic prior to move out or ship out equipment
from the base. Maintaining client equipment inventory at warehouse or store prior for
auditing or ordering new stock based on the inventory checklist.
 Involved in high pressure equipment such as portable hydraulic torque machine or testing
equipment and being able to prepare and handling those equipment efficiency.
Maintenance all equipment has been back load from site to the base for preparation to
other location or other job.
 Attended various course such as Petronas PTW, Exxon PTW, Nippon PTW, Talisman
PTW, Newfield PTW, Petrofac PTW and Tubing Conveyed Perforation school 1
including explosive and radiation handling, T.C.P equipment and tools assembly drawing,
correlation, space out, downhole calculation, perforation terminology and example tools
(BHA) lay out.
 Performed T.C.P job, including shoot and pull, ITCP and well test at Petronas Baram
block in Miri, Exxon Tapis block in Kemaman and Petrofac Berantai block in Kuala
Terengganu. Involved in testing job at Nippon Adong Kecil West block in Miri and
Engkabang West block in Marudi land rig. Involved in Wireline Perforation job at
Dulang block in Kemaman under Dimension Bid and Coil tubing Perforation job at
Talisman Kinabalu block in Labuan. Perform T.C.P job as a Specialist including Wire
line job at Dulang block, Coil Tubing job at Kinabalu block and Exxon at Telok B
platform batch completion campaign. Assist Slick line Job at FMC Johor on set on
plug at hanger and redress plug for Shell Gemusut Kakap. Assist T.C.P Australia for
equipment preparation in Jandakot and assembled and loading equipment at Karratha.

4.  Maintaining communication between client representative and other third party that
involve by providing enough information and sharing opinion for successions each job.
 Preparing client paperwork and end job report for each job been run and conduct
discussion with co-worker and coordinator about each job for process improvement and
implementation.
Experiences Gained:
 Involve in all operational during perforation on new zone or existing zone.
 Expose to drilling calculation and solution.
 Excellent organizational and motivational skills.
 Perforation knowledge on each job been assigned.
Reason for Leaving:
Seek for better career enhancement opportunities and exposure.
UMW Petrodril (Malaysia) Sdn Bhd
Position Title : Roughneck
Position Level : Fresh/Entry Level
Specialization : Hydraulic Work over - Oil/Gas
Industry : Work Over
Duration : May 2010 – June 2012
Work Description:
Roughneck Responsibilities:
 Provide technical knowledge to other departments, clients and potential clients on
Hydraulic Work over Unit (HWU) and work over operations.
 Hands-on offshore experience as a HWU Assist Operator during work over operation at
DLA, DLC, DLD, BODP-C, KINDP-A, BODP A, BADP B and TKDP B platforms.
 Involve in Rig Mobilization, Rigging Up and Rigging down HWU Unit. Install electrical
submersible pump, fire water pump, kill and return line for kill the well and the basic
supply from barge to platform deck prior to start operation.
 Involve in Rigging Up Blow Out Preventer (BOP), Kill Well, Christmas Tree/B-section
removal, Pull Out of Hole (POOH) existing Completion Tubing and drill pipes, run in hole
(RIH) scrapper/fishing tools, RIH new completion, smart well and HWU rig-down.
 Assist Service Company such as Schlumberger, Solar Alert, Baker Atlas, Halliburton
when doing Wire line, Wellhead, Gravel Pack and Completion job.

5.  Obtained Basic Offshore Safety Induction and Emergency Training (BOSET) certification
from SEQU Offshore Safety Sdn. Bhd.
Experiences Gained:
 Involve in all operational during work over existing production string.
 Expose to drilling calculation and solution.
 Excellent organizational and motivational skills.
 Knowledge of oil & gas equipment usage for well completion until wellhead nipple up.
Reason for Leaving:
Seek for better career enhancement opportunities and exposure.
Halliburton Manufacturing & Technology (M) Sdn. Bhd
Position Title : CNC Machinist & Mechanical Assembler
Position Level : Fresh/Entry Level
Specialization : Engineering - Oil/Gas
Industry : Manufacturing / Production
Duration : Oct 2007 – May 2010
Work Description:
Machinist Responsibilities:
 Operating Okuma CNC turning LU35, LU400 and LU45 and familiar with Controller
Okuma PSL200 and basic of Fanuc Controller. Responsible to set up machine according
to programming and using operation checklist to documented any process that has been
done. Interpreting drawing before machining and ordering tools or fixture according to the
programming.
 Applying geometric tolerance and dimensioning in any job that associated to the drawing.
Using measurement gauges to check all dimensions such as caliper, ID micrometer, OD
micrometer, Inch tape, dial bore gauges, all gage maker gauges and profile geometric
machine. Make sure the part is according to the specification in the drawing that given for
machining such as threading, grooving, surface finish, any special fixture on the part.

6.  Familiar with the American Petroleum Institute (A.P.I) requirement especially for
grooving, threading and surface finishing. Experiencing in machining and rework
Halliburton‘s A.P.I threads such as buttress, stub acme, acme, IF, TJ and a lot of A.P.I
threads. Participating in Hazards Communication and STOP program that identify
hazards around us and take action to reduce hazard risks at workplace. Able to work
under minimum supervision, tight schedule and alone, performs a variety of machining
operations associated with the manufacturing of float, packer and cementing tool
products. Maintaining 5S during and after work.
Mechanical Assembler Responsibilities:
 Responsible to set up assembly working area, plug equipment and float equipment
preparation, arrangement and ordering of tools and fixtures for assembly and testing
area. Experienced in preparing and setup Assembly and Testing line specially for casing
equipment (float & plug product) at Halliburton manufacturing Johor, Malaysia.
 Assist with assembling and disassembling plug and float product tool based on technical
drawing, Engineering Data Sheet and B.D.M.I (Halliburton Service Tool & Casing
Equipment).
 Assembly organized and experienced at troubleshooting and procedures for assembly
and assist tester on testing cementing tools. Working together with QC & Sustaining
Engineer in problem solving, trouble shooting and maintaining quality for the part before
delivery to customer.
Additional Info
I’m the person who working under limited supervision, performs a variety of assembly operations
associated with the manufacturing of casing equipment (casing product), small & big mechanical
parts, or equipment housing or large equipment such as MSIPC, ESIPC, MSPCC, ES
CEMENTER, FO CEMENTER, NR SSR PLUG, SSR II PLUG, OPENING PLUG, CLOSING
PLUG, SHUTOFF PLUG, VERSAFLEX LINER HANGER, SWIVEL EQUALIZING VALVE,
ISOLATION PACKER, FLOAT SHOE, FLOAT COLLAR and etc. My assembly jobs also include
fitting, mounting, alignment, adjusting, helping operational testing (max: 10000 ~ 15000 psi),
repairs, in-depth troubleshooting and diagnosing according to the drawing and Engineering Data
Sheet (EDS), and training of other personnel. May also hand-assemble detonating devices,
maintain, and issue safety equipment.
Experiences Gained:
 Involve in producing cementing tool and packer product that been used in oil & gas
exploration at the field.
 Measurement gauges and dimensioning.
 Excellent organizational and motivational skills.
 Knowledge of oil & gas equipment and in manufacturing industries for oil & gas
exploration.

7. Reason for Leaving:
 Seek for field work career enhancement opportunities and exposure.
Skill and Strengths
 Able to handle Hydraulic tong or manual tong.
 Knowledgeable in Well Intervention perforation.
 Knowledgeable in Work over perforation and operation.
 Knowledgeable in Drilling perforation and operation.
 Obtain forklift and defensive driving training.
 Obtain T.C.P school 1 certificate.
 Obtain PETRONAS Smart Card, complete with T-BOSIET and Offshore medical
Certificate.
 Obtain valid PTW from various clients such as PETRONAS, EXXONMOBIL, TALISMAN,
and NIPPON OIL.
 Excellent ability in interpreting mechanical and production drawing.
 Knowledgeable in preparing downhole tool diagram and running tool.
 Ability to perform disassembly and assembly tools alone or team.
 Proficient in Microsoft office and able to use AutoCAD.
 Basic knowledge in CADCAM software.
 Operated CNC Turning.
 Ability to reworking thread using CNC lathe machine.
 Knowledgeable in CNC programming.
 Knowledgeable in A.P.I specification.
 Knowledgeable in Metal Technology.
 Knowledgeable in Quality Control and Inspection.
 Medium Knowledge in Heat Treatment.
 Ability to use Welding Machine.
 Ability to work under pressure, minimum supervision and meet tight deadlines.
 Proficient in Bahasa Malaysia and Proficient spoken in English.
 Written in Bahasa Malaysia and English.
 Willing to learn and fast learner.
 Ability to work in team / team.
Miscellaneous
Willing To Relocate : Yes
Possess Own Transport: Yes
Availability: Immediately after notice period of 1 month.

8. References
The following persons have agreed to provide any additional information regarding my
qualifications and character:
Ms. Lee Nak Gui
Technical Sales Advisor (TCP)
Halliburton Energy (M) Sdn. Bhd.
Suite 10.01 & 10.02, Level 10, G Tower 199,
50400 Kuala Lumpur.
Mobile: 012 - 8761544
Email: leenak.gui@halliburton.com
Mr. Amir Faiz Mohd Nazir
Field Service Manager (TCP)
Halliburton Energy (M) Sdn Bhd
Warehouse No. 39,
Kemaman Supply Base, 24000 Kemaman,
Terengganu, Malaysia.
Mobile: 019 - 9154320
Email: amirfaiz.mohdnazir@halliburton.com