1. MECHANICAL ENGINEER (BEM registered)
1
PERSONNEL INFORMATION
CAREER OBJECTIVE
To grow in a progressive organization as a Mechanical Engineer where the blend of my experience and enhanced
educational skills can help in achieving the goals of the company. I would like to exploit my potential and sense of
obligation for the benefit of the organization.
EMPLOYMENT HISTORY
MAY 2016 – PRESENT
Company : SALCON ENGINEERING BHD Position : Planner
Duties : Project Management
- Assist Project Manager in preparing project schedule, coordinate & monitor project in
construction.
- Set work program and target milestone for each phase based on project plan using MSP.
- Monitor critical activities based on project schedule and advise project management.
- Participate in project meeting and revise the schedule as deem as necessary and advice to the
team.
- Establish track and report site progress and presented in S-Curve to management.
- Maintain and update of site work progress obtained from Field / Site Engineers.
- Analyse actual work progress and planned schedules.
- Perform other duties as and required by the company.
Project
Involvement
:
Year 2016 Project History
May -
Present
Updating15MLD WaterTreatmentProcessplantto55MLD atSungaiLebamLojiAir, Johor
New construction 120MLD Water Treatment Plant, 140 MLD Raw Water Pumping, 1.4m
Dia. x 12km Length pipelay and distributes main pipe at KTU, Terengganu.
Reason for
Leaving :
Keen looking for Project / Mechanical engineer job which are related to my previous experience and
education knowledge.
MARCH 2009 – JAN 2016
Company : SAPURAKENCANA PETROLEUM BHD. Position : Construction Engineer
Duties : Project Management
- Assist Project / Construction Manager in preparing project schedule, coordinate & monitor
project.
- Be contact point for client once project execute and do technical clarification/solution.
- Perform overall quality control of work (budget, schedules, plans & quality)
- Develop Technical Proposal & Evaluation / Tender to procure project services.
- Interface and liaise with project team, contractors and client to run the project.
- Develop daily progress report in daily, weekly and monthly basis during construction.
- Prepare, check and verify proposal/quotation to Client on any additional works that require to be
carried out at site.
Name : SAMBASIVAM s/o POOTHAN MOOKAIAH
Address :
BLOCK D-6-11 KOI KINRARA SUITE
JALAN PIPIT BUKIT TANDANG
47190 PUCHONG
SELANGOR
Mobile
No. :
012-9160578
Email : sambasivame@gmail.com
Nationality : MALAYSIA
Marital
Status :
MARRIED Age : 33
2. MECHANICAL ENGINEER (BEM registered)
2
- Monitoring construction and installation activities to ensure compliance with project
specifications and issued design documents.
- Perform other duties as and required by the company.
Engineering
- Develop methodology and procedures for engineering installation (structure and piping
systems).
- Prepare report, test plan and test report for piping and structure installation during construction.
- Design detailed mechanical assembling and stress analysis by using AUTOCAD/CAESER II.
- Develop engineering calculations prior to installation / construction.
- Preparation of Material Take Off (MTO), Material Requisition(MR) and Technical Evaluation (TE).
- Solve any technical query raised by CLIENT during construction.
- Develop and review Engineering Drawing (issued for construction).
- Develop pipeline, riser, subsea and structure installation procedure by utilizing engineering
standard codes and procedure.
Project
Involvement
:
Year 2015 Project History
Jan - Feb
March -
Nov
Mobilized offshore equipments and materials on work lay barge SK 2000, Pasir Gudang
Johor
Loadout Coordination for 20” Dia. Linepipe at Phu My Port, Vietnam – Nam Con Son
Phase 1 , Vietnam
20” x 173km Gas Pipeline installation using SK1200 work lay barge at Nam Con Son 2,
Vietnam
Year 2014 Project History
Aug - Nov
April - July
Loadout Coordination for 20” Dia. Linepipe at Phu My Port, Vietnam – Nam Con Son
Phase 1 , Vietnam
20”Pipeline, SubseaPLETand UmbilicalinstallationinF29&F23GasFieldDevelopment,
Miri - Shell
Feb – March Engineering design & fabrication of Eyeball ROV platform onDP1 Vessel – Sarawak Shell
Berhad
Jan – Feb Mobilize SK2000 Work Lay Barge for F14,F23 & F29 Pipeline Installation – Sarwak Shell
Berhad
Year 2013 Project History
Sept - Nov Kumang Pipeline Protection in MLNG, Sarawak – Petronas Carigali, PCSB
June - Aug Loadout Permas Jacket and IPF on material barge at Labuan Shipyard & Engineering,
Labuan – MURPHY SABAH OIL CO. LTD
March - May Loadout Jacket and Topside on material barge at Brooke Dockyard, Kuching – MURPHY
SARAWAK OIL CO. LTD (South Asis Project)
Jan - Feb Rig Up of project spread on Kruez Installer at Kuantan – PETROFAC West Desaru project
Mobilize diving spread on Petra Challenger for F23 D Conductor repair – Sarawak Shell
Project
Year 2012 Project History
April - Sept PipelineanalysisandLoadoutoperationonmaterialbargeat KuantanforEMEPMI(Tapis
/ Telok) project & PCSB (SKO PL370, PL366 & PL364)
March -
April
Pipeline analysis and Loadout operation on material barge at Kuantan for PETROFAC
(Cendor / West Desaru) project
Jan - Feb Mobilized QP 2000 (work lay barge) for BERANTAI FIELD DEVELOPMENT PROJECT,
BLOCK PM309
3. MECHANICAL ENGINEER (BEM registered)
3
Year 2011 Project History
July - Sept Pipeline analysis and Loadout operation on material barge at Kuantan for Shell (CPDR-
A) project
May - June Pipeline analysis and Loadout operation on material barge at Kuantan for Shell (F28)
project
March - May Pipeline analysis and Loadout operation on material barge at Kuantan for Newfield
project
Jan- March Submarine Cable Replacement at BODP-A/BODP-B Petronas Platform at Miri Offshore
Year 2010 Project History
Nov - Dec 8” Pipeline Riser and Submarine cable Installation (SJQ-A / SJQ-C) for SHELL Platform at
Sabah Offshore
March - May 8” Pipeline Installation for MURPHY project at Kota Kinabalu Offshore
Jan - Feb Pre-Commisioning of Pipelines for PETRONAS (Samarang) project at Labuan Offshore
Year 2009 Project History
March - Dec Internal division training in TL Offshore
Reason for
Leaving :
Company was offered MMS/VSS since closure of operations department
HIGHEST EDUCATION
BACHELOR OF MECHANICAL ENGINEERING (Hons.)
University: UNIVERSITY TENAGA NASIONAL (UNITEN)
Graduated: 23rd
August 2008 CGPA: 3.23 / 4.00 (2nd class upper)
SKILLS
Software : - Microsoft Office Job : - Baseline Project Schedule Creation / Planning
- Microsoft Project 2013 - Prepare method statement / project procedure
- AUTOCAD - CLIENT / Sub-Con coordination skills
- Solid works - Strong presentation / communication skills
- Mathcad
- Knowledge in Engineering Standard
(ASME, API, B31.4…..etc design code)
- Primavera - Supervision of operations / construction
- Able to read technical drawing
SALARY
Last : RM 5000
Expected : RM 6000 - 7000
4. MECHANICAL ENGINEER (BEM registered)
4
AFILIATIONS
- Microsoft Project 2010 Course, 2016
- ISM & ISPS Internal Auditor Training
- English Communication (Level 1) – Aust-Asiatic Management, 2015
- High Impact Business Presentation Skills - 2014
- Project Management (PMI), 2013
- Project Planning ,2011
- Board of Engineers Malaysia, BEM
- CIDB (valid until 7/12/2016)
- Dean List – 2007 Uniten
- Malaysian National Chemistry Quiz 2002 - STPM
REFERENCE
SALCON ENGINEERING BHD SAPURAKENCANA PETROLEUM
1) Mr. Yap Soi Yong
Project Director
SALCON ENGINEERING BHD
Persiaran Kewajipan, USJ 1
HP : 012-3092148
Email : ysp@salcon.com.my
2) Mr. Badrul Hisham
Project Manager
SALCON ENGINEERING BHD
Persiaran Kewajipan, USJ 1
Hp: 012-2324969
Email:
badrulhisham@salcon.com.my
1) Mohmd. Zamri Yusof
Senior Manager
SAPURAKENCANA- TL
OFFSHORE
Hp: 019-6630 186
Email:
mzamri@sapurakencana.com
2) Ahmad Razani
Othman
General Manager
SAPURAKENCANA- TL
OFFSHORE
Hp: 019-2869870
Email:
razani@sapurakencana.com