Multiphase Desanding for Upstream Oil & Gas Industry
•
2 likes•200 views
This document discusses the design and operation of multiphase desanders. It presents four key aspects of sand separation and describes multiphase desanding systems that can be installed at the wellhead. Several case studies are provided that illustrate the use of multiphase desanders on offshore platforms and onshore wells. The desanders are able to separate solids from fluids across a range of production rates and compositions.
Report
Share
Report
Share
Recommended
BPClairRidge
Subsea 7 has been contracted by BP to assist in developing the Clair Ridge field located west of Shetland. The project involves engineering, procuring, fabricating, and installing a 6km oil export pipeline, 14km gas export pipeline, three manifold structures, and two umbilical jumpers to connect the new Clair Ridge facilities to the existing Clair Phase 1 export system. Subsea 7 will split the offshore installation work into three campaigns over three years using seven vessels. The project also requires developing a method to temporarily isolate the existing 105km oil export line to allow a tie-in without de-oiling the entire line.
Vedam Design: Engineering Solutions - Gas Ships
Vedam Design is an engineering company that provides gas ship design solutions. It has offices in India, UAE, and Netherlands and has been in operation since 2007. The company focuses on design solutions for seagoing, coastal, and inland vessels that utilize gases like LNG, CNG, and LPG as fuel. It has extensive experience in small scale gas carrier design, gas propulsion system upgrades, and conversions of vessels like LNGC to FSRU. Some of its gas ship design projects include an LNG powered barge, 2500 CBM and 750 CBM LNG shuttle carriers, and LNGC to FSRU conversions.
Vedam Design: Dredging Solutions
Customized and high performance dredger design,Dredger Equipment package, best suited for design and performance
criteria, Project management and equipment up gradations.
Vedam Design:- BWTS - Retrofits Services
Vedam Design provides end-to-end solutions for ballast water treatment system (BWTS) retrofits. They offer feasibility studies using 3D scanning for accurate spatial analysis, workshop drawings to prefabricate pipe spools, and project management services during retrofits. Their experienced teams include naval architects, mechanical engineers, electrical engineers, and site leads to support BWTS retrofits from design to installation. Vedam has associations with major BWTS original equipment manufacturers and experience performing over 100 BWTS retrofits.
KMOC ASIA Ltd.
Kakinada Marine & Offshore Complex Limited (KMOC) was established in 2005 to provide shore base services and one-stop support for offshore drilling companies. KMOC specializes in services like shore base facilities, pipe yards, logistics, dedicated berths, warehouses, mud plants, and repairs. It has infrastructure like workshops, storage areas, cranes, and equipment to support offshore drilling operations. Major customers include Schlumberger, Transocean, Baker Hughes, and ONGC.
Mud Mixing plant installed onboard Trinity Supporter for NIKO
A mud mixing plant was fabricated and installed onboard the MV Trinity Supporter for a client in Indonesia. The plant included a 2250 barrel main tank, 250 barrel brine mixing tank, generators, circuit breakers, mud guns, agitators, pumps, mixers, a centrifuge, conveyors, and a mud lab housed in a storage container. The fabrication began in Singapore and the plant was installed over several days before commissioning at the anchorage offshore Singapore.
Vedam Designs: Solutions for Shallow Water maintenance Dredging
Vedam Designs: Solutions for Shallow Water maintenance DredgingVedam design & Techincal Consultancy Pvt Ltd.
Vedam Design is an ISO 9001-2015 certified engineering firm with offices in India, UAE, and Netherlands that provides design and engineering services for marine vessels. They have a team of 80 professionals and have completed over 650 projects in 30 countries. The document discusses Vedam Design's dredging expertise and proposes solutions for shallow water maintenance dredging projects in India. It suggests either the new construction of small, cost-effective trailer suction hopper dredgers or the conversion of existing vessels like barges as viable options. Conversion can reduce costs by 50-75% compared to new builds and offers a shorter timeline.FEA and Deepwater Project Summary 2007-2015
This document provides a summary of projects completed by APS/AWE between 2007 and 2014 related to front-end engineering and design (FEED) for subsea oil and gas infrastructure. It includes conceptual design projects for manifolds and analysis of riser systems in New Zealand and Australia. Additionally, it outlines manifold and pipeline end manifold system designs for offshore oil projects in Angola, Australia and the Gulf of Mexico.
Recommended
BPClairRidge
Subsea 7 has been contracted by BP to assist in developing the Clair Ridge field located west of Shetland. The project involves engineering, procuring, fabricating, and installing a 6km oil export pipeline, 14km gas export pipeline, three manifold structures, and two umbilical jumpers to connect the new Clair Ridge facilities to the existing Clair Phase 1 export system. Subsea 7 will split the offshore installation work into three campaigns over three years using seven vessels. The project also requires developing a method to temporarily isolate the existing 105km oil export line to allow a tie-in without de-oiling the entire line.
Vedam Design: Engineering Solutions - Gas Ships
Vedam Design is an engineering company that provides gas ship design solutions. It has offices in India, UAE, and Netherlands and has been in operation since 2007. The company focuses on design solutions for seagoing, coastal, and inland vessels that utilize gases like LNG, CNG, and LPG as fuel. It has extensive experience in small scale gas carrier design, gas propulsion system upgrades, and conversions of vessels like LNGC to FSRU. Some of its gas ship design projects include an LNG powered barge, 2500 CBM and 750 CBM LNG shuttle carriers, and LNGC to FSRU conversions.
Vedam Design: Dredging Solutions
Customized and high performance dredger design,Dredger Equipment package, best suited for design and performance
criteria, Project management and equipment up gradations.
Vedam Design:- BWTS - Retrofits Services
Vedam Design provides end-to-end solutions for ballast water treatment system (BWTS) retrofits. They offer feasibility studies using 3D scanning for accurate spatial analysis, workshop drawings to prefabricate pipe spools, and project management services during retrofits. Their experienced teams include naval architects, mechanical engineers, electrical engineers, and site leads to support BWTS retrofits from design to installation. Vedam has associations with major BWTS original equipment manufacturers and experience performing over 100 BWTS retrofits.
KMOC ASIA Ltd.
Kakinada Marine & Offshore Complex Limited (KMOC) was established in 2005 to provide shore base services and one-stop support for offshore drilling companies. KMOC specializes in services like shore base facilities, pipe yards, logistics, dedicated berths, warehouses, mud plants, and repairs. It has infrastructure like workshops, storage areas, cranes, and equipment to support offshore drilling operations. Major customers include Schlumberger, Transocean, Baker Hughes, and ONGC.
Mud Mixing plant installed onboard Trinity Supporter for NIKO
A mud mixing plant was fabricated and installed onboard the MV Trinity Supporter for a client in Indonesia. The plant included a 2250 barrel main tank, 250 barrel brine mixing tank, generators, circuit breakers, mud guns, agitators, pumps, mixers, a centrifuge, conveyors, and a mud lab housed in a storage container. The fabrication began in Singapore and the plant was installed over several days before commissioning at the anchorage offshore Singapore.
Vedam Designs: Solutions for Shallow Water maintenance Dredging
Vedam Designs: Solutions for Shallow Water maintenance DredgingVedam design & Techincal Consultancy Pvt Ltd.
Vedam Design is an ISO 9001-2015 certified engineering firm with offices in India, UAE, and Netherlands that provides design and engineering services for marine vessels. They have a team of 80 professionals and have completed over 650 projects in 30 countries. The document discusses Vedam Design's dredging expertise and proposes solutions for shallow water maintenance dredging projects in India. It suggests either the new construction of small, cost-effective trailer suction hopper dredgers or the conversion of existing vessels like barges as viable options. Conversion can reduce costs by 50-75% compared to new builds and offers a shorter timeline.FEA and Deepwater Project Summary 2007-2015
This document provides a summary of projects completed by APS/AWE between 2007 and 2014 related to front-end engineering and design (FEED) for subsea oil and gas infrastructure. It includes conceptual design projects for manifolds and analysis of riser systems in New Zealand and Australia. Additionally, it outlines manifold and pipeline end manifold system designs for offshore oil projects in Angola, Australia and the Gulf of Mexico.
Segment Presentation RES Marine Equipment
This document summarizes the services provided by Innovative Service Solutions for marine equipment. It discusses emergency repairs conducted at sea to minimize downtime, including examples of repairing a bow thruster motor and generator while ships were underway. The company aims to exceed customer expectations through dedicated employees and high standards of quality and safety. It provides maintenance, repairs, and other services for a wide range of marine equipment globally.
YH profile (E)
YH Marine Services provides engineering services including ship repair, conversion, and building. They have experience with projects like building oil tankers, chemical vessels, and tugs. They also supply marine equipment such as generators, switchboards, cranes, and fabricate structures for offshore oil rigs. Their capabilities include specialized structural work, equipment installation, and rope access technicians to support offshore and marine projects.
Keeping Wastewater Flowing while managing major capital works for NI Water, 9...
Keeping Wastewater Flowing while managing major capital works for NI Water, 9...Association for Project Management
Presentation given by Eimear Gourley, Martin Murray and Ciaran Moohan, to the Northern Ireland branch on 9 October 2019 in Belfast
Viaduct experience
The document summarizes a rail and road viaduct extension project in Tuas, Singapore called the Tuas West Extension. It extends an existing east-west rail line by 4 km. VSL Singapore was contracted to design erection equipment and perform all post-tensioning work. The author was the gantry engineer in charge of one rail gantry for 7 months, providing consultancy and on-site supervision to optimize construction cycles and ensure compliance with the approved design.
City Council March 19, 2013 Hickory update
The document provides a progress update on various components of a water infrastructure project, including the transmission main, booster pump station and well field, groundwater treatment, and new groundwater wells. For the transmission main, digging, laying, and burying of pipes is 80% complete. At the booster pump station and well field, foundations are underway and well cleaning is in progress, with potential delays due to longer than expected cleaning times. Design of the groundwater treatment plant is anticipated to be complete at the end of April. Engineering for new wells is also underway.
J Ray Firsts
J. Ray McDermott achieved several industry firsts including:
- Installing the first pipeline using J-Lay method
- Receiving ISO 14001 certification as the first offshore platform fabrication company
- Designing and installing the first in-line diverless pipeline tie-in sled
- Designing, fabricating, and installing the deepest tripod jacket in the world at 671 feet water depth
UWANDU KENNETH CV
Uwandu Kenneth is a service supervisor with over 4 years of experience in well cementing and miscellaneous pumping operations. He has worked on numerous rigs for companies like SPDC, NAOC, and Chevron, cementing over 30 wells and demonstrating skills in cementing calculations, pressure testing, and equipment operation and maintenance. The document provides details of his career highlights, qualifications, skills, and references.
2013版中国lng卫星站项目名单（英文）
本项目名单为《中国液化天然气项目名录2013》所收录LNG 卫星站类项目之名单(按首字母顺序排列)。该名录包括中国十二五期间663 个LNG 卫星站的投产状态、所处地理位置、装置的主要功能(接收、液化及气化)、控股投资者(上级管理机构)及一线运营单位的当前主官经理和公司联系方式。
Hallin Marine
Hallin Marine Subsea International Plc is an integrated subsea contractor that provides professional and cost effective subsea solutions throughout the entire field life cycle. It has resources like subsea operations vessels, saturation diving systems, ROVs, engineering capabilities, and project personnel located in offices and support facilities around the world. Hallin Marine has a proven track record on projects involving subsea construction, inspection, repair and maintenance, and has supported major clients on jobs in locations like Southeast Asia, India, Australia, and the US.
JAT4 Kick off Introduction - UAE Navy
This document provides an introduction and overview of the Jebel Ali Terminal 4, Phase 1 project located in Dubai, UAE. The scope of work includes dredging, construction of a 400m quay wall, reclamation areas, two causeways totaling over 2km, a 420m bridge, 5km of roads, buildings, and utilities for a general cargo yard. The 18.5 month project schedule is fast-tracked and will require 24 hour operations for some activities. An environmental impact assessment was conducted to determine baseline conditions and ensure the project does not adversely affect the environment.
Scott Smith-CV
Scott Smith is a Senior Facilities/Project Engineering Manager with over 27 years of experience in the oil and gas industry. He holds a B. Eng in Mechanical Engineering from Heriot Watt University. His experience includes managing greenfield and brownfield projects involving facilities, FPSOs, pipelines and subsea infrastructure for companies like Oryx Petroleum and Addax Petroleum. He has extensive experience interfacing with contractors, overseeing HSE, and managing projects on schedule and budget.
2014 CRW - Omega Morgan Rigging Job of the Year
SC&RA’s Rigging Job of the Year designation is one of the most sought after awards within the crane and rigging industry. This year’s competition included 15 companies from 3 countries vying for this honor. This session showcased the three winning entries which include the removal of 10 platforms on a control tower at McCarran International Airport in Las Vegas, Nevada; the movement of the 87-year old Sellwood Bridge in Portland, Oregon, from its permanent concrete supports to temporary steel piers making way for new bridge construction across the Willamette River; and the recovery of the cruise ship Costa Concordia, which was resting on an underwater rock ledge off the coast of Isola Del Giglio in Italy.
Check out these presentations! They are a testament to the commitment and ingenuity at the heart of our industry!
Under $150,000 - Barnhart Crane & Rigging
Between $150,000 - $750,000 - Omega Morgan
Over $750,000 - Fagioli
DATA2015-12-06 Ashghal Presentation 2
This document discusses a construction project by Leighton Qatar – Al Jaber Engineering JV to build bridges along a new orbital highway in Qatar (Contract 3). It provides details on the precasting and erection of bridge segments for 11 junctions along the highway, including specifications on the segments, required equipment and resources, production rates, and erection methods. Ramp bridges will be erected using an underslung launching gantry, while main bridges will be erected using crawler cranes either on falsework or via portals over an existing road.
Lick Creek Wastewater Treatment Plant
The document summarizes proposed improvements to the Lick Creek Wastewater Treatment Plant, including replacing pumps, adding process controls, improving clarifiers, modifying sludge handling equipment, and replacing an aging centrifuge. The total cost of the project is estimated at $2.3 million. Key aspects of the project include replacing an old centrifuge for $990,100, adding new flow meters for $189,000, and improving sludge holding capacity with tank modifications for $311,000. The director recommends awarding the construction contract to Bryan Construction.
Seca seminar 2013 clean marine - nils høy-pettersen
This document summarizes a presentation by Clean Marine AS on their exhaust gas cleaning system. Some key points:
- Clean Marine AS is a pioneering company in exhaust gas cleaning systems (EGCS) with over 20 employees and USD 20 million invested in development.
- They have a proven EGCS technology and a contract to install systems on two Samsung/AET shuttle tankers delivering in late 2014 and early 2015.
- With new sulfur regulations coming into effect from 2015, EGCS presents a viable option for vessels to continue using less expensive high-sulfur fuel and avoid costly low-sulfur fuel.
Sripadasagar project
The Sripadasagar Project aims to irrigate 200,000 acres of land in Karimnagar district. It involves constructing a barrage across the Godavari river to store 20 TMC of water (Stage I), lifting 8.5 TMC to supply water to NTPC (Stage I, Phase II), and lifting 12 TMC to irrigate the 200,000 acres (Stage II, Phase I). Three contracts were awarded totaling Rs. 2244.77 crores to complete these stages. Construction of the barrage is underway but land acquisition remains a challenge, with only 225 acres acquired out of the 8745 required. Work on supplying water to NTPC and irrigating the land is ongoing but
2015版中国lng卫星站项目名录
本文件为《中国液化天然气项目名录2015》LNG卫星站部分按首字母顺序排列之名单。该名录包括中国43个海基（内河）LNG接收站和中转站，319个液化装置（原料气包括常规天然气、煤层气、焦炉煤气、煤制天然气和合成氨尾气等）和832个LNG卫星站的投产状态、所处地理位置、装置的主要功能（接收、液化及气化）、控股投资者（上级管理机构）及一线运营单位的当前主官经理、公司企业所有制类型和联系方式。
Innovative, faster and safer access solutions for jack-up-rig leg works - OJ...
Palfinger systems GmbH headquartered in Weng, Austria, is a globally active company engaged in the development and manufacture of highly reliable, innovative and customised access technologies and hull treatment systems for the ship and offshore industry. http://www.palfingersystems.com/en/
Inspection and maintenance on the legs of Jack up rigs is necessary at regular intervals for both maintenance and Class requirements. Conventionally, scaffolding towers are erected and/or rope access teams utilized, which requires an enormous amount of effort, workforce, time and money. To minimize this effort and increase the scope of achievable and safe offshore work, Palfinger systems developed the concept of JUMP (Jack-Up Maintenance Platform) with RC (Rack Cranes) and IP-11 (Inspection Platform).
Climbing on the existing leg racks, JUMP is designed to provide easy and fast access to the different designs and models of jack up rigs. The climbing mechanism is adaptable to Opposable or Single Racks and Triangular or Square Lattice leg types. The modular design allows different leg sizes and designs to be easily configured.
The 3rd Offshore Jack Up Middle East Conference 2015, held at The Address Downtown, Dubai, UAE on 5th - 6th October, awarded "The Technological Innovation Award" to Palfinger systems GmbH.
The award was accepted by Benji George, Business Manager - Middle East. https://www.linkedin.com/in/benjigeorge
Diverless Services Pipelines
The document discusses enhancing offshore pipeline emergency repair capabilities from 2014-2017. It notes pipeline diameters and inventory in SEIC. Pipeline failures like leaks and ruptures could be addressed with diverless equipment like hydro clamps, section replacement connectors, and ROVs. Currently available equipment requires divers. Emergency pipes are stocked in Kholmsk. The strategy is to use Oil States diverless equipment with a remote operated vehicle spread for cutting, welding, and coating removal to respond to emergencies without divers during ice conditions from December to May.
Master präsentation pal sys-offshore
This document provides an overview of Palfinger Systems Solutions offshore access systems. It introduces Palfinger's DNA and various offshore access products, including the Inspection Platform (IP) for inspections and small repairs, the Rack Crane (RC) for larger repairs, the Jack Up Maintenance Platform (JUMP) for large repairs and surface treatments, and the Under Platform Access (UPA) for access to difficult underside areas. Details are given on the design, features, and uses of each product. The document also provides information on Palfinger's global locations and customers.
Wellstream Processing sales presentation
NOV has acquired FJORDS, expanding its Wellstream Processing division. This will give NOV an expanded technology portfolio, access to over 800 NOV locations worldwide, and significant in-house fabrication capabilities. The acquisition will allow NOV to provide even better service and be a complete process solutions provider for its customers.
Hank Rawlins
The Distinguished Lecturer Program provides concise summaries of technical documents on facilities sand management. This summary covers a two-day course on the topic presented by Dr. Hank Rawlins, who has over 25 years of industry experience. The course covers the five key steps to managing sand in production facilities: separation, collection, cleaning, dewatering, and transport. It emphasizes understanding sand issues in facilities rather than focusing on specific equipment.
More Related Content
What's hot
Segment Presentation RES Marine Equipment
This document summarizes the services provided by Innovative Service Solutions for marine equipment. It discusses emergency repairs conducted at sea to minimize downtime, including examples of repairing a bow thruster motor and generator while ships were underway. The company aims to exceed customer expectations through dedicated employees and high standards of quality and safety. It provides maintenance, repairs, and other services for a wide range of marine equipment globally.
YH profile (E)
YH Marine Services provides engineering services including ship repair, conversion, and building. They have experience with projects like building oil tankers, chemical vessels, and tugs. They also supply marine equipment such as generators, switchboards, cranes, and fabricate structures for offshore oil rigs. Their capabilities include specialized structural work, equipment installation, and rope access technicians to support offshore and marine projects.
Keeping Wastewater Flowing while managing major capital works for NI Water, 9...
Keeping Wastewater Flowing while managing major capital works for NI Water, 9...Association for Project Management
Presentation given by Eimear Gourley, Martin Murray and Ciaran Moohan, to the Northern Ireland branch on 9 October 2019 in Belfast
Viaduct experience
The document summarizes a rail and road viaduct extension project in Tuas, Singapore called the Tuas West Extension. It extends an existing east-west rail line by 4 km. VSL Singapore was contracted to design erection equipment and perform all post-tensioning work. The author was the gantry engineer in charge of one rail gantry for 7 months, providing consultancy and on-site supervision to optimize construction cycles and ensure compliance with the approved design.
City Council March 19, 2013 Hickory update
The document provides a progress update on various components of a water infrastructure project, including the transmission main, booster pump station and well field, groundwater treatment, and new groundwater wells. For the transmission main, digging, laying, and burying of pipes is 80% complete. At the booster pump station and well field, foundations are underway and well cleaning is in progress, with potential delays due to longer than expected cleaning times. Design of the groundwater treatment plant is anticipated to be complete at the end of April. Engineering for new wells is also underway.
J Ray Firsts
J. Ray McDermott achieved several industry firsts including:
- Installing the first pipeline using J-Lay method
- Receiving ISO 14001 certification as the first offshore platform fabrication company
- Designing and installing the first in-line diverless pipeline tie-in sled
- Designing, fabricating, and installing the deepest tripod jacket in the world at 671 feet water depth
UWANDU KENNETH CV
Uwandu Kenneth is a service supervisor with over 4 years of experience in well cementing and miscellaneous pumping operations. He has worked on numerous rigs for companies like SPDC, NAOC, and Chevron, cementing over 30 wells and demonstrating skills in cementing calculations, pressure testing, and equipment operation and maintenance. The document provides details of his career highlights, qualifications, skills, and references.
2013版中国lng卫星站项目名单（英文）
本项目名单为《中国液化天然气项目名录2013》所收录LNG 卫星站类项目之名单(按首字母顺序排列)。该名录包括中国十二五期间663 个LNG 卫星站的投产状态、所处地理位置、装置的主要功能(接收、液化及气化)、控股投资者(上级管理机构)及一线运营单位的当前主官经理和公司联系方式。
Hallin Marine
Hallin Marine Subsea International Plc is an integrated subsea contractor that provides professional and cost effective subsea solutions throughout the entire field life cycle. It has resources like subsea operations vessels, saturation diving systems, ROVs, engineering capabilities, and project personnel located in offices and support facilities around the world. Hallin Marine has a proven track record on projects involving subsea construction, inspection, repair and maintenance, and has supported major clients on jobs in locations like Southeast Asia, India, Australia, and the US.
JAT4 Kick off Introduction - UAE Navy
This document provides an introduction and overview of the Jebel Ali Terminal 4, Phase 1 project located in Dubai, UAE. The scope of work includes dredging, construction of a 400m quay wall, reclamation areas, two causeways totaling over 2km, a 420m bridge, 5km of roads, buildings, and utilities for a general cargo yard. The 18.5 month project schedule is fast-tracked and will require 24 hour operations for some activities. An environmental impact assessment was conducted to determine baseline conditions and ensure the project does not adversely affect the environment.
Scott Smith-CV
Scott Smith is a Senior Facilities/Project Engineering Manager with over 27 years of experience in the oil and gas industry. He holds a B. Eng in Mechanical Engineering from Heriot Watt University. His experience includes managing greenfield and brownfield projects involving facilities, FPSOs, pipelines and subsea infrastructure for companies like Oryx Petroleum and Addax Petroleum. He has extensive experience interfacing with contractors, overseeing HSE, and managing projects on schedule and budget.
2014 CRW - Omega Morgan Rigging Job of the Year
SC&RA’s Rigging Job of the Year designation is one of the most sought after awards within the crane and rigging industry. This year’s competition included 15 companies from 3 countries vying for this honor. This session showcased the three winning entries which include the removal of 10 platforms on a control tower at McCarran International Airport in Las Vegas, Nevada; the movement of the 87-year old Sellwood Bridge in Portland, Oregon, from its permanent concrete supports to temporary steel piers making way for new bridge construction across the Willamette River; and the recovery of the cruise ship Costa Concordia, which was resting on an underwater rock ledge off the coast of Isola Del Giglio in Italy.
Check out these presentations! They are a testament to the commitment and ingenuity at the heart of our industry!
Under $150,000 - Barnhart Crane & Rigging
Between $150,000 - $750,000 - Omega Morgan
Over $750,000 - Fagioli
DATA2015-12-06 Ashghal Presentation 2
This document discusses a construction project by Leighton Qatar – Al Jaber Engineering JV to build bridges along a new orbital highway in Qatar (Contract 3). It provides details on the precasting and erection of bridge segments for 11 junctions along the highway, including specifications on the segments, required equipment and resources, production rates, and erection methods. Ramp bridges will be erected using an underslung launching gantry, while main bridges will be erected using crawler cranes either on falsework or via portals over an existing road.
Lick Creek Wastewater Treatment Plant
The document summarizes proposed improvements to the Lick Creek Wastewater Treatment Plant, including replacing pumps, adding process controls, improving clarifiers, modifying sludge handling equipment, and replacing an aging centrifuge. The total cost of the project is estimated at $2.3 million. Key aspects of the project include replacing an old centrifuge for $990,100, adding new flow meters for $189,000, and improving sludge holding capacity with tank modifications for $311,000. The director recommends awarding the construction contract to Bryan Construction.
Seca seminar 2013 clean marine - nils høy-pettersen
This document summarizes a presentation by Clean Marine AS on their exhaust gas cleaning system. Some key points:
- Clean Marine AS is a pioneering company in exhaust gas cleaning systems (EGCS) with over 20 employees and USD 20 million invested in development.
- They have a proven EGCS technology and a contract to install systems on two Samsung/AET shuttle tankers delivering in late 2014 and early 2015.
- With new sulfur regulations coming into effect from 2015, EGCS presents a viable option for vessels to continue using less expensive high-sulfur fuel and avoid costly low-sulfur fuel.
Sripadasagar project
The Sripadasagar Project aims to irrigate 200,000 acres of land in Karimnagar district. It involves constructing a barrage across the Godavari river to store 20 TMC of water (Stage I), lifting 8.5 TMC to supply water to NTPC (Stage I, Phase II), and lifting 12 TMC to irrigate the 200,000 acres (Stage II, Phase I). Three contracts were awarded totaling Rs. 2244.77 crores to complete these stages. Construction of the barrage is underway but land acquisition remains a challenge, with only 225 acres acquired out of the 8745 required. Work on supplying water to NTPC and irrigating the land is ongoing but
2015版中国lng卫星站项目名录
本文件为《中国液化天然气项目名录2015》LNG卫星站部分按首字母顺序排列之名单。该名录包括中国43个海基（内河）LNG接收站和中转站，319个液化装置（原料气包括常规天然气、煤层气、焦炉煤气、煤制天然气和合成氨尾气等）和832个LNG卫星站的投产状态、所处地理位置、装置的主要功能（接收、液化及气化）、控股投资者（上级管理机构）及一线运营单位的当前主官经理、公司企业所有制类型和联系方式。
Innovative, faster and safer access solutions for jack-up-rig leg works - OJ...
Palfinger systems GmbH headquartered in Weng, Austria, is a globally active company engaged in the development and manufacture of highly reliable, innovative and customised access technologies and hull treatment systems for the ship and offshore industry. http://www.palfingersystems.com/en/
Inspection and maintenance on the legs of Jack up rigs is necessary at regular intervals for both maintenance and Class requirements. Conventionally, scaffolding towers are erected and/or rope access teams utilized, which requires an enormous amount of effort, workforce, time and money. To minimize this effort and increase the scope of achievable and safe offshore work, Palfinger systems developed the concept of JUMP (Jack-Up Maintenance Platform) with RC (Rack Cranes) and IP-11 (Inspection Platform).
Climbing on the existing leg racks, JUMP is designed to provide easy and fast access to the different designs and models of jack up rigs. The climbing mechanism is adaptable to Opposable or Single Racks and Triangular or Square Lattice leg types. The modular design allows different leg sizes and designs to be easily configured.
The 3rd Offshore Jack Up Middle East Conference 2015, held at The Address Downtown, Dubai, UAE on 5th - 6th October, awarded "The Technological Innovation Award" to Palfinger systems GmbH.
The award was accepted by Benji George, Business Manager - Middle East. https://www.linkedin.com/in/benjigeorge
Diverless Services Pipelines
The document discusses enhancing offshore pipeline emergency repair capabilities from 2014-2017. It notes pipeline diameters and inventory in SEIC. Pipeline failures like leaks and ruptures could be addressed with diverless equipment like hydro clamps, section replacement connectors, and ROVs. Currently available equipment requires divers. Emergency pipes are stocked in Kholmsk. The strategy is to use Oil States diverless equipment with a remote operated vehicle spread for cutting, welding, and coating removal to respond to emergencies without divers during ice conditions from December to May.
Master präsentation pal sys-offshore
This document provides an overview of Palfinger Systems Solutions offshore access systems. It introduces Palfinger's DNA and various offshore access products, including the Inspection Platform (IP) for inspections and small repairs, the Rack Crane (RC) for larger repairs, the Jack Up Maintenance Platform (JUMP) for large repairs and surface treatments, and the Under Platform Access (UPA) for access to difficult underside areas. Details are given on the design, features, and uses of each product. The document also provides information on Palfinger's global locations and customers.
What's hot (20)
Keeping Wastewater Flowing while managing major capital works for NI Water, 9...
Keeping Wastewater Flowing while managing major capital works for NI Water, 9...
Seca seminar 2013 clean marine - nils høy-pettersen
Seca seminar 2013 clean marine - nils høy-pettersen
Innovative, faster and safer access solutions for jack-up-rig leg works - OJ...
Innovative, faster and safer access solutions for jack-up-rig leg works - OJ...
Similar to Multiphase Desanding for Upstream Oil & Gas Industry
Wellstream Processing sales presentation
NOV has acquired FJORDS, expanding its Wellstream Processing division. This will give NOV an expanded technology portfolio, access to over 800 NOV locations worldwide, and significant in-house fabrication capabilities. The acquisition will allow NOV to provide even better service and be a complete process solutions provider for its customers.
Hank Rawlins
The Distinguished Lecturer Program provides concise summaries of technical documents on facilities sand management. This summary covers a two-day course on the topic presented by Dr. Hank Rawlins, who has over 25 years of industry experience. The course covers the five key steps to managing sand in production facilities: separation, collection, cleaning, dewatering, and transport. It emphasizes understanding sand issues in facilities rather than focusing on specific equipment.
fishbone-.pptx
- Fishbones is a technology company that provides multilateral stimulation solutions like jetting and drilling to increase production from oil and gas wells.
- They have over 20 installations globally with proven results like increased and sustained production, improved injectivity, and reduced environmental impact.
- Case studies demonstrated Fishbones' ability to unlock tight reservoirs and increase production over 2x in some cases by accurately connecting the reservoir.
Facilities Sand Management Rawlins eProcess
SPE Distinguished Lecturer presentation (2018-2019 term) from Dr. Hank Rawlins of eProcess Technologies
Facilities Sand Management; SPE Distingushed Lecture Series
The document discusses the Society of Petroleum Engineers Distinguished Lecturer Program and facilities sand management. Primary funding for the program comes from member donations and industry contributions. The program provides training modules on various aspects of facilities sand management, covering topics like the nature of produced solids, separation, collection, cleaning, dewatering, and transport. Effective sand management requires following all steps of separating, collecting, cleaning, dewatering, and transporting sand from the wellstream.
Asia days Oslo 2013 - Market opportunities in South & South East Asia - Energy
This document provides an overview of oil and gas exploration and production opportunities in several Asian countries. It summarizes Malaysia's acreage under production sharing contracts, key operators, and some upcoming projects. It also summarizes similar data for Indonesia, India, Singapore, Thailand, and Vietnam, including market sizes, top operators, and selected upcoming projects in each country. The document concludes by listing some upcoming oil and gas exhibitions.
Oil & Gas opportunities in Southeast Asia
This document provides an overview of oil and gas exploration and production opportunities in several Asian countries. It summarizes Malaysia's acreage under production sharing contracts, key operators, and some upcoming projects. It also summarizes similar statistics for Indonesia, India, Singapore, Thailand, and Vietnam, including market sizes, major operators, and selected upcoming projects in each country. The document concludes by listing upcoming oil and gas exhibitions, including ones in Vietnam and with a Norwegian pavilion.
Field Production Operator CV
Hafiz Muhammad Naeem Shahzad is a Pakistani national with over 10 years of experience working in oil and gas production. He currently works as a Field Production Operator for OMV Pakistan Exploration & Production GmbH. Previously, he worked for Pakistan Oilfields Limited as a Field Production Operator. He has extensive experience operating wellheads, gas plants, and other production facilities. He is proficient in HSE procedures and maintaining compliance.
ACARP wall -flow DFP project - Coplin
The document summarizes a project funded by ACARP to develop a wall-flow diesel particulate filter system that can meet the stringent temperature and emissions requirements for use in underground coal mines, with testing showing the system is capable of reducing particulate emissions by over 95%; next steps include further engineering of the system and field testing.
Hard Rock Literature and Information
Hard Rock Directional Drilling is a leading provider of horizontal directional drilling and field services with over 11 years of experience. It has a seasoned management team and over 100 employees supporting operations across multiple Texas locations. Hard Rock prides itself on its safety record and turn-key operations supported by in-house maintenance, fabrication, and extensive equipment. It has successfully completed over 2 million feet of installations for utility and energy customers.
PQ_SEC _2014
The document provides information about Shinjin Engineering Co., including:
- Their history and capabilities in areas such as gas and water treatment, piping, and fabrication.
- Their organization chart and staff experience/qualifications.
- Example projects they have completed for customers like ExxonMobil, Total, and Samsung.
- Their partnership with Kanfa Ingenium Process, which provides process design expertise to complement Shinjin's detailed engineering and project management capabilities.
Iws product and services overview rev 0
Integrated Well Services provides oilfield separation, filtration, and treatment equipment and services. It has over 10 years of experience working with major clients like Petronas. The company has offices and fabrication yards in Kuala Lumpur, Miri, Kemaman, and Labuan. Its product lines include cyclonic separators, self-cleaning filters, oil-water separators, and enhanced oil recovery technologies. Services include design, fabrication, installation, and commissioning of production facilities. Integrated Well Services has ISO 9001 certification and licenses to work with Petronas.
IWS Product and Services Overview rev 0
Integrated Well Services provides oilfield separation, filtration, and treatment equipment and services. It has over 10 years of experience working with major oil and gas companies in Malaysia. The company aims to help clients improve production efficiency through specialized products like cyclonic separators, self-cleaning filters, and produced water treatment systems. It also offers complementary services including design, fabrication, installation, and commissioning. Integrated Well Services is certified to ISO 9001 standards and licensed to work on PETRONAS projects.
# Harshad CV 2015 07
This document is a curriculum vitae for Harshadkumar R Patel, a mechanical engineer from Ahmedabad, India. It details his career history working in rig management and installation management roles from 2012-2015 and 2006-2012 respectively, along with previous roles as a senior tool pusher, driller, and assistant driller dating back to 1989. It also lists the training courses and qualifications he has completed throughout his career.
Tushar resume
This document provides a summary of Tushar N. Badhe's professional experience and qualifications. It details his 14 years of experience conducting inspections of industrial fabrication projects for companies in various industries. It also lists his educational background which includes a piping engineering diploma and NDT certifications.
SISCO - Presentation
The document provides an overview of SISCO, an ISO-certified Saudi construction company established in 1990, outlining their areas of business in oil, gas, and industrial construction, maintenance, and piping projects. It details SISCO's resources including 2000 employees, 700 vehicles and equipment, facilities, and past clients such as Saudi Aramco, SABIC, and Sadara. The document also includes sections on health, safety and environmental records, credentials, contract features, project organization, and a mobilization plan.
Trican Well Service - Unconventional Resources Presentation
Apresentação de Jim McKee, da Trican Well Services, durante o evento promovido pelo Sistema FIEB, Fundamentos da Exploração e Produção de Não Convencionais: a Experiência Canadense.
Exploring Tight Gas Reservoir Using Intelligent Well Technology
The document discusses exploring tight gas reservoirs economically using intelligent well completion (IWC) technology. Tight gas is found in low permeability rock and requires hydraulic fracturing and directional drilling to produce. IWC uses remotely operated valves for selective multi-stage fracturing of horizontal wells to improve efficiency. A case study describes how IWC and microseismic monitoring in China's Changbei Field helped optimize subsequent horizontal well completions in that field.
Pieter Nortje update Fitter with dual Diesel and Auto (1)
This document provides a summary of Pieter Nortje's personal and professional details. It includes his qualifications, languages spoken, driver's license, employment history spanning over 30 years working for various mining companies in South Africa and overseas, most recently as an underground mobile plant maintenance fitter in Rustenburg. It details the various mining equipment he has experience working on and maintaining across different roles.
Zerrouki Khalid CV
Khalid Zerrouki is a well test supervisor and petroleum engineer with over 10 years of experience in well testing operations. He has a degree in petroleum engineering and has worked for companies such as Weatherford, SPETCO Kuwait, and Tetra Technologies. Zerrouki has extensive experience leading well testing teams and performing various well testing jobs, including high pressure and H2S gas wells. He is skilled in well testing equipment and has supervised jobs involving drilling, logging, drill stem tests, and surface well testing equipment.
Similar to Multiphase Desanding for Upstream Oil & Gas Industry (20)
Facilities Sand Management; SPE Distingushed Lecture Series
Facilities Sand Management; SPE Distingushed Lecture Series
Asia days Oslo 2013 - Market opportunities in South & South East Asia - Energy
Asia days Oslo 2013 - Market opportunities in South & South East Asia - Energy
Trican Well Service - Unconventional Resources Presentation
Trican Well Service - Unconventional Resources Presentation
Exploring Tight Gas Reservoir Using Intelligent Well Technology
Exploring Tight Gas Reservoir Using Intelligent Well Technology
Pieter Nortje update Fitter with dual Diesel and Auto (1)
Pieter Nortje update Fitter with dual Diesel and Auto (1)
Recently uploaded
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Recently uploaded (20)
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Multiphase Desanding for Upstream Oil & Gas Industry
- 1. SPE-185658-MS Separating Solids First – Design and Operation of the Multiphase Desander Hank Rawlins, PhD, P.E., eProcess Technologies
- 2. Four Nodes of Sand Separation Slide 8 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins Multiphase Desanding
- 3. Multiphase Desander (@ Wellhead) Slide 9 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins
- 4. Operating Units Slide 16 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins Date: 2012 Location: Malaysia Operator: Petronas Carigali Field: Duyong Fixed Platform Unit: API 5K Wellhead Desander Flow: 6 MMSCFD gas (trace liquids) Operation: D98>20 microns Date: 2014 Location: Saudi Arabia Operator: Halliburton Field: Well Testing Unit: API 15K Wellhead Desander Flow: 15000 BLPD + 200 MMSCFD Operation: D98>20 microns Date: 2011 Location: Turkmenistan Operator: Dragon Oil Field: LAM B Unit: API 900# Wellstream Desander Flow: 4000 BLPD + 5 MMSCFD Operation: D98>23 microns Date: 2014 Location: Argentina Operator: YPF Field: Unidad de Negocios Neuquen Unit: API 5K Wellhead Desander Flow: 600 BLPD + 10 MMSCFD Operation: D98>10 microns
- 5. Application & Operations Slide 18 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins
- 6. Operating Boundaries: Process Fluids & Pressure Slide 19 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins 100
- 7. Subsea Wellhead Desander Slide 22 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins
- 8. Multiphase Desander Key Items • All oil & gas wells produced sand • Facilities Sand Management part of flow assurance • Separation of sand at the wellhead can restore or increase hydrocarbon production • Sand removed at the wellhead is easy to transport and handle • Multiphase desander operates at 0-100% GVF • Single insert design most appropriate for multiphase flow • Mechanical design to API 15K Slide 23 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins
- 9. Technical Paper References Slide 24 SPE-185658-MS • Separating Solids First – Multiphase Desander • Hank Rawlins
- 10. Contact Presented by Hank Rawlins, PhD, P.E. Technical Director | USA E: hrawlins@eprocess-tech.com P: +1-406-565-2095 www.eprocess-tech.com Slide 25