working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
NATIONAL LABORATORY FOR SOIL AND BUILDING MATERIALS TESTINGNationalLaboratory
National laboratory for Geotechnical Investigation & Building Material Testing department has a wide range of specialized testing services and highly-qualified technicians
Detail oriented and adaptable structural engineer seeking a challenging position in the structural engineering field, gain the capability to produce innovative structural solutions and utilize this knowledge to the benefit of my career
NATIONAL LABORATORY FOR SOIL AND BUILDING MATERIALS TESTINGNationalLaboratory
National laboratory for Geotechnical Investigation & Building Material Testing department has a wide range of specialized testing services and highly-qualified technicians
Detail oriented and adaptable structural engineer seeking a challenging position in the structural engineering field, gain the capability to produce innovative structural solutions and utilize this knowledge to the benefit of my career
Contact Lenses Management in PediatricsKaylie Ling
The post-surgical management of the pediatric aphakic is important. Contact lens is the best optical device in the post-operative aphakia to provide good visual quality.
•Professional Engineering, Management and Contractual issues in the mega projects. Expe-rience (21 years) Contributed in international contracts (FIDIC, Lump Sum/Turn Key/EPC , Re-measurement, , Reimbursement Contract, Arbitration, A.D.R,Consortium,J.V) and inter-national specifications and codes since early start by joining world-wide companies in the Middle East (Gulf Experience) and Africa such as: SBG,ABB,ASEC,DSD, and Mohram / Bahkhoum office. Consortium with Dar Al Handasa.
•Preparing the technical proposal , commercial proposal and Project Management for tender of Transportation
- Orange Metro and (ICONIC) Obhur Creek Bridge & Secondary Bridges with Related Ap-proaches & Tunnel & Highways & Service Infrastructure.
- Modernization upper Egypt railways and Central Control Regions Building as sub-contractor to Alstom.
• Master Degree, High Degree Diploma from Cairo University, Consultant Member (84/20), in additional to Contractual and Legal aspects in Contraction form American University Collage (AUC)/ PMP.
•More than (14 years) experience with ABB Co. in energy plants, Transportation and wa-ter/Sewage plants. Delighted to me the position of Civil Engineering Department Manager for 7 years.
•The past strong experience and the managerial skills provide the capability to act the civil work as key successfully package in the project from initiating stage to close out stage including maintenance stage.
1. Mohamed Ezzat Abd El-Rahman Negm
Personal Summary
As a Project Manager Engineer with more than 4 years' experience in MEP Construction field and 2 years as a
senior Production and Manufacturing Engineer, I have the ability to analyze complex engineering problems and
recommend solutions. I’m driven hardworking and complete all projects to an excellent standard on time and to
budget. I'm looking for the next step which is working in large organization which will add more to my knowledge
and experience in addition to a much better opportunities to progress in my career.
Contact Info.
Mobile: + (002) 0100 245 6639.
Phone: + (002) 25412710.
Email: M_Negm87@Live.Com.
Personal Data
Date of Birth: 1th
of Oct 1987
Nationality: Egypt.
Marital Status: Married
Military Status: Exempted.
Driving License: Available.
Address: Villa 42 - 5th
District - New Cairo - Cairo - EGYPT.
Education
2004 - 2009 Bachelor of Engineering, Modern Academy Collage.
Graduation year: August 2009.
Major: Production and Manufacturing.
Graduation Grade: Good.
B.Sc. Graduation Project grade: Excellent (98%).
B.Sc. Graduation Project:
CAD/CAM Software (Computer Aided Design / Computer Aided Manufacturing) for
Automatic Feature Recognition and Part Programming Software for CNC Machine
using Programming Language.
Work Experience
Current Job (January 2012 – till now)
Project Manager in EMAS El- SEWEDY for Engineering and installation one of EL-SEWEDY Company groups.
Reference List of Projects:
Mega Mall / 6th
of October / Electrical works and LC activity / closed and hand over.
CHIMI Art factory / 6th
of October industrial area / LT, PS and LC activity / SUBBOR Consultant /
Closed and hand over.
Porto October park / 6th
of October / LT, Electrical and LC activity / closed and hand over.
Al-AMAL for pipes / 10th
of Ramadan / HVAC works and Electrical Panels / SUBBOR Consultant /
Closed and hand over.
Alex. Containers / Alexandria / High-Mast Lighting Towers / closed and hand over.
KAFR ZAYAT / El- Ain El SOKHNA / Small Power Plant / (Running Project).
Vaccine / 6th
of October / EMP Project All Electrical & Mechanical activities / SUBBOR Consultant / (Running
Project).
El - Bohous Building / Nasr City / Electrical works activities / Wady El-Nile Consultant / (Running Project).
2. Duties & Responsibilities:
1) Understands project specific accepted terms and conditions and their application to project contracts,
including awareness of risks of negative impact on margin, performance and risk factors.
2) Review contract drawings, detail drawings and specifications.
3) Prepares Primavera P6/ MS Project schedules, using P6 tool/ MS Project to extract progress information.
4) Coordination of the time schedule with the project team and the various sub-contractors involved in a
project, to ensuring that the interfaces between various organizations are identified and scheduled.
5) Follow up / Monitor site work to make sure the site progress as per the project schedule.
6) Tracking and coordinate the progress of the project on a day-to-day basis to ensure that the project is on-
track.
7) Ensuring that the project is completed safely, in time, within budget and according to specifications.
8) Create and approved the cash flow from the owner according to Project planning.
9) Responsible for Reviewing and approved shop drawings, materials submittals, catalogues and samples
from Owner / Consultant.
10) Contact Tech. Office to Preparing shop drawing for all MEP systems.
11) Monitor and manage the project schedule.
12) Monitor and manage the project budget.
13) Monitor and manage the project risk.
14) Perform quality assurance on sub-contractor performance.
15) Forecast manpower to complete according to project commitments and productivity.
16) Analysis the Bill of Quantity to create Work breakdown Structure (WBS).
17) Attend project coordination meetings with client/consultant.
18) Estimate and negotiate project Change Requests.
19) Coordinate submittals and procure all close-out documents including operation warranties, and
maintenance manuals.
Pervious Job Experience (September 2009 – December 2011)
Production and Manufacturing Engineer in EMAS El-SEWEDY for Electrical Panel Boards
“SIEMENS Partnership” One of EL-SEWEDY Company groups.
Duties & Responsibilities:
1) Prepare Production Plan for all projects components according to priorities and production process.
2) Prepare Product tracing Card for all components according to priorities.
3) Prepare nesting sheets by using different programs for CNC Punching Machines as follow :
(a) Punch 5 / Lenia 5 for AMADA EMZ 3610 NT Sheet Metal Machine.
(b) Jetcam for Finn-Power E5 and Finn-Power C5 Sheet Metal Machine.
(c) Fanuc 21 for EHRT Cupper Machine.
4) Review the programming of nesting sheets to be sure that it investigating the maximum productivity and
minimum scraps.
5) Prepare sheet metal dimension list for Cut to Length Machine after programming CNC Machines.
6) Make sure that shearing and bending machines working according to technical drawings.
7) Make sure that all materials and tools are organized during manufacturing to shorten changeover time.
8) Create and improve working instructions of new product and current mass production process.
9) Work smoothly with Assembly Department, Quality to ensure projects are handled efficiently.
10) Identifying ways to reduce production costs, time and increase production rates
11) Reviewing production schedule and estimating future requirements.
12) Calculate the break-even point BEP for all material used.
13) Keep Equipment’s operational by coordinating, performing maintenance, repair services, following
manufacturer's instructions, established procedures, and requesting special service.
14) Provide guidance and training to the staff.
15) Follow all safety and work procedures.
16) Writing professional progress reports for Production and Assembly Managers.
17) Running meetings and Coordination with other team members.
3. Courses
1) PLC Advanced Course from Technology Competency Center TCC.
2) Business & Communication Skills (American Theories) at International Education Association.
3) Microsoft Office (all versions).
4) Mechanical drawing Software (AutoCAD 2D) from Information System Institute, Ministry of Defense 2008.
5) Solidworks from CADCAMCIM.
6) English Conversation (Level 9/11) – Native Teacher at SYE.
7) Project Management Professional (PMP) Certified by PMI.
8) Mini-Master Business Administrator (Mini-MBA) from NGC Academy.
9) Designing & Implementations of Electrical Systems Diploma from Expert Academy.
10) Primavera P6 Course (Version R8.1) from Expert Academy “Still Studying “.
Training
1) Arab Steel Fabrication Co. (ASF El-Sewedy) From (15/7/2008) To (7/8/2008).
Galvanization of Metals (Application – Others).
Steel Factory (Application – Others).
Lighting Columns Factory (Application – Others).
2) Canyon El-Sewedy Co. From (8/8/2008) To (15/9/2008).
Plant Electrical Panels.
Automatic Casting.
Production of Neon Lamp.
3) Solid Edge - (Inside working founder).
4) JETCAM Controller Software for Finn-Power Machine - (Inside working founder).
5) Punch 5 (LENIA 5) Controller Software for AMADA Machine - (Inside working founder).
Technical Software Skills
1. Solidworks (3D drawings, Animation).
2. Microsoft office (Word, Excel, PowerPoint, Access).
3. Mechanical drawing Software (AutoCAD 2D).
4. Solid Edge (3D drawings, Animation).
5. Microsoft Project.
6. Primavera.
7. Electronic circuits Simulator software (Electronic work bench).
Soft Skills
1. Self-motivated.
2. Time Management.
3. Communication skills.
4. Presentation skills.
5. Planning.
6. Hard worker.
7. Problem Solver.
8. Team leadership.
Language
• Arabic: Fluent.
• English: Advanced.
Hobbies
* Reading. * Swimming
* Playing Chess. * Traveling.
* Meeting Friends. * Computer Searching.
N.B: All Documents are available upon request