Mohamed Sabry El Banna is a senior structural engineer with over 15 years of experience in structural design and detailing. He has worked on numerous projects in Egypt, Europe, Senegal, Tunisia, and Libya. He is proficient in AutoCAD, ArmaCAD, Revit, and other BIM software. He holds a BSc in Civil Engineering and is seeking a challenging position as a structure engineer at a multinational company.
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
working skills :
o Preparation of a 3D PDMS model for all plant areas within the contract Scope,
o The 3D model is showing the plant and the integration into the existing. The
Model includes:
i. Plant co-ordinates and elevations
ii. All equipment items acc. to equipment list.
iii. Clearances for disassembly, maintenance and operation.
iv. Clearances for pipe- and cable runs.
v. Requirements for steel structure (buildings & pipe racks).
vi. Pipe routing for major process piping (main process route).
vii. Equipment Arrangement according the layout standard & safety gaps
viii. The required steel structure Develop and issue isometric drawings including pipe
Supports for construction using 3D Model.
o Preparing complete design of piping general arrangement layouts and key plans using P&ID's and vendor data.
o Design Review for lines, equipment and structure in Navisworks, & PDMS Reviews for completeness (routing feasibility and requirements of process and accessibility).
o Prepare piping Daily & weekly reports.
o Attend hazed kick of meeting
o Follow up tenders
o Attend engineering weekly meetings to review progress & schedule
o Field Technical support.
o Site verification on isometric Drawing & layouts for new lines/tie in's.
o Developing AS BUILT Drawing.
o Testing procedures as applicable to Fabricated Equipment & Piping with knowledge of Isometric drawings and P& ID's
o Prepare transmittal report
And now i am working a piping design engineer at UNEPP
You can find my resume attached below as i will gladly provide any further information may be required
thank you
Best Regards
Mohamed osama
1. Mohamed Sabry El Banna
Mobile No.: 002 0100 7241 441 / 002 012 1077 9928
Tel. No.: 002 02 2455 3280
41 El Maqrezy St., Heliopolis, Cairo, Egypt.
Engmohamed.elbana@hotmail.com
PROFILE
I have six years of experience in detailing of reinforced concrete structures nationally and overseas
(including Europe). I have successfully worked on many projects of various sizes and levels of complexities,
and within different sectors. This includes detailing projects within the residential, commercial and energy
sectors. Prior obtaining my experience in detailing, I had undertaken the design and execution on site of water
and sewage networks for two years. In 2005, I attained a BSc in Civil Engineering which has given me a
strong foundation of engineering knowledge. This enables me to work under minimal supervision and
instructions. Also, I have just finished the preparation course of PMP and waiting for the test with PMI.
OBJECTIVES
Seeking a challenging position in a multinational company as a Structure Engineer where I can use my
academic degree to capitalize my technical, interpersonal and leadership skills, enhance them, allow me to
engage dynamically and exert positive influence.
EDUCATION
2005 Ain Shams University, Cairo, Egypt.
B.Sc. Civil Engineering, Public Works Division with grade Good (72%), Ranking (11).
Surveying subject is the Graduation Project with grade Excellent.
EMPLOYMENT HISTORY
VINCI, Cairo, Egypt – Senior Structural Engineer (Full-time).
(January 2011 – present).
Main Duties
Revision of workshop drawings for reinforced concrete structures elements. Coordinating with site,
consultant and owner. Managing tasks and duties with the staff.
Projects
- New Assiut Barrage and Hydropower Plant, Assiut, Egypt.
Client: Ministry of Water Resources and Irrigation - ARE
4 milliard EGP
Responsible reviewing the work shop drawings for onsite complex infrastructures, foundations and structure
elements of the barrage. All work is under German CODE standards. Our company provided an EPCM
services for a Greenfield Mineral Sands Project which also included mining minerals processing.
2. SNC-LAVALIN, Cairo, Egypt – Structural Engineer (Full-time).
(January 2011 – 2014).
Main Duties
Producing, revision and making all pre-study works of workshop drawings for reinforced concrete
structures elements and coordinating with the Canadian team. We used the ArmaCAD software to produce the
work shop drawings and I have the ability to perform my work using different types of software.
Projects
- GRANDE CÔTE MINERAL SANDS PROJECT, SENEGAL.
Client: Grande Côte Operations - Dakar
550 million CA $
Responsible for producing and reviewing the work shop drawings for onsite complex infrastructures
and Foundations of (Dry mill with depth 2.50 m, Sand trap concrete, warehouse and Wet mill feed hopper).
All work is under EUROCODE standards. Our company provided an EPCM services for a Greenfield Mineral
Sands Project which also included mining minerals processing.
- SOUSSE COMBINED CYCLE POWER PLANT, TUNISIA.
Client: the Société tunisienne de l’éléctricité et de gaz (STEG)
340 million CA $
One of the team responsible for preparing the drawing list and time estimated of drawings delivery,
also the responsibilities of drawings production and reviewing of the RC elements of the power plant
equipments structures. Elements such as walls, cores and huge depths foundations (2.0, 3.50 & 4.0 m). These
foundations are with different number of layers according to design which is so difficult in rebar execution.
- GURYAN REHABILITATION INSTITUTION, LIBYA.
Client: General People's Committee for Justice
200 million CA $
Responsible for producing and reviewing the work shop drawings for this infrastructure project of a
jail in Libya. Structure design and the work shop drawing were according to the EUROCODE standards. This
project is divided into many structure buildings (low & high security cell blocks, dormitory & central office
building). All structure elements are cast in situ.
FCBM, Cairo, Egypt – Structural Engineer (Full-time).
(Collaboration with SETEC-TPI)
(January 2007 to January 2011)
Main Duties
Producing full details for RC very complex infrastructures elements (walls, slabs, beams, columns &
stairs) by using ArmaCad software. Making full review for the submittal before sending to client. Planning
and applying for modifications, mails and time estimation. All these previous tasks are prepared for the
followings projects.
Projects
- FLAMANVILLE (3) - Flamanville, Manche, France
Client: Ministry of Energy and Electricity of France (EPR)
11 billion $
It is a new generation power plant that produced 18.9 TWh, which amounted to 4% of the electricity
production in France. This project contains many complex buildings (HQB, HL4, HX & HZ).
3. - TAI SHAN NUCLEAR POWER PLANT
Client: EDF & CGNPC
7.5 billion $
Taishan nuclear power plant adopts European pressurized water reactor (EPR) – the third generation
nuclear power type, which has the largest capacity in the world. The Taishan EPR nuclear power plant adopts
a semi-underground arrangement that the turbine hall has two floors above ground and two floors
underground.
I participated in producing several projects in France like, Electric Station (Montereau), Under
Ground Stations (Paliseau), Tunnels, Bridges & Administrative buildings in Paris.
CONCORD for Engineering & Contracting, Cairo, Egypt – Civil Engineer (Full-time).
(August 2005 to January 2007)
Main Duties
Sewage & water networks execution. Reviewing design, surveying works and data collected form site.
Reviewing technical tender documentations. Preparing all work shop drawings necessary in construction.
Establishing control systems in the site. Supervising, execution and revising construction works. Supervising
work progress for projects and preparing the required reports. As Built investigations and reports.
Projects
- Saladin Citadel, Consultant: Sabbour Association.
- Boulaq El Dakrour & Manshiat Nasser, Consultant: Dorsch Gruppe with the co-operation between the
Egyptian and the German governorates.
COMPUTER SKILLS
AutoCAD.
ARMACAD.
Revit " Certified from Autodesk".
AutoCAD Structure Detailing " Certified from Autodesk".
MS-Windows XP (Installation and Troubleshooting).
Microsoft Office XP (Word, Excel, Power Point).
LANGUAGE SKILLS
Arabic (mother language).
English (fluent).
French (average).
PERSONAL DATA
Date of Birth : November 10, 1983.
Nationality : Egyptian.
Marital Status : Married.
Military Status : Finished.
4. MISICELLANEOUS
Member of the Egyptian Syndicate of Engineers, 2005-Now.
International driving license.
REFERENCES
References furnished upon request.