This document is a reference manual for the NETGEAR DM111P ADSL2+ Ethernet Modem. It provides regulatory compliance statements and product details for the DM111P modem, which is intended for home use to connect devices to the internet via an ADSL connection. The manual contains information on the Federal Communications Commission compliance, European Union compliance, and other regulatory notices as well as publication details.
Gsm r 5.0 bts3012 ae configuration principle v1.0(20120726)Pham My
The document describes the hardware and license configuration principles for Huawei's BTS3012AE base station to support GSM-R 5.0. It provides details on mandatory and optional hardware modules, such as cabinets, processing units, radio packages and installation materials. It also lists the license types and configuration rules for functions like dual transceiver, high power, packet bit transmission and diversity.
Presentation on gpon and customer services by deepak sapateDeepak Sapate
The document provides an overview of a presentation on GPON topology and customer excellence. It includes:
1) An agenda covering GPON technology, fiber distribution architecture, and customer service excellence.
2) Details on GPON specifications, standards, and network architecture for delivering triple-play services of internet, voice, and IPTV over a GPON network from the service provider to customers.
3) Information on key aspects of customer service excellence like customer insight, journey, and drivers of satisfaction to improve customer relationships and satisfaction.
This document provides an overview of the architecture and components of a Nokia BSS (Base Station Subsystem). It describes the functional units of the BSC3i including the BCSU, MCMU, OMU, PCU, hard disks, and MO unit. It also outlines the GSWB, clock, and ET units. The document is intended to provide basic information to BSS engineers on the BSC architecture and troubleshooting process.
This document discusses Zhone's GPON ONT product family. It provides details on several indoor and outdoor ONT models for residential and business customers. Key information includes supported interfaces, features, availability dates, and upcoming products in development. The document also covers Zhone's MDU and active Ethernet ONT solutions.
This document provides an overview of Wideband Code Division Multiple Access (WCDMA) technology. It discusses the basics of WCDMA including that it uses direct sequence spread spectrum technology and differentiates users through the use of spreading codes. It also describes key aspects of WCDMA such as power control, handovers between cells, and current market adoption of WCDMA networks. The document aims to inform readers about the specifications and advantages of the 3G wireless standard known as WCDMA.
VDSL Vectoring TEST PT TELKOM ALCATEL LUCENTWahyu Nasution
This document provides a test plan for validating VDSL2 vectoring performance on an Alcatel-Lucent ISAM FD system using a 48-port VDSL2 card with board-level vectoring. The plan includes tests of vectoring gains using different profiles, functionality tests of HSI, multicast, and triple-play services, and system acceptance tests of alarm reporting and sync rates on 48 VDSL ports. Results are provided demonstrating improved downstream and upstream rates with vectoring enabled compared to the non-vectored case on a subset of profiles. Services including internet, video, and voice are also confirmed to function as expected.
Gsm r 5.0 bts3012 ae configuration principle v1.0(20120726)Pham My
The document describes the hardware and license configuration principles for Huawei's BTS3012AE base station to support GSM-R 5.0. It provides details on mandatory and optional hardware modules, such as cabinets, processing units, radio packages and installation materials. It also lists the license types and configuration rules for functions like dual transceiver, high power, packet bit transmission and diversity.
Presentation on gpon and customer services by deepak sapateDeepak Sapate
The document provides an overview of a presentation on GPON topology and customer excellence. It includes:
1) An agenda covering GPON technology, fiber distribution architecture, and customer service excellence.
2) Details on GPON specifications, standards, and network architecture for delivering triple-play services of internet, voice, and IPTV over a GPON network from the service provider to customers.
3) Information on key aspects of customer service excellence like customer insight, journey, and drivers of satisfaction to improve customer relationships and satisfaction.
This document provides an overview of the architecture and components of a Nokia BSS (Base Station Subsystem). It describes the functional units of the BSC3i including the BCSU, MCMU, OMU, PCU, hard disks, and MO unit. It also outlines the GSWB, clock, and ET units. The document is intended to provide basic information to BSS engineers on the BSC architecture and troubleshooting process.
This document discusses Zhone's GPON ONT product family. It provides details on several indoor and outdoor ONT models for residential and business customers. Key information includes supported interfaces, features, availability dates, and upcoming products in development. The document also covers Zhone's MDU and active Ethernet ONT solutions.
This document provides an overview of Wideband Code Division Multiple Access (WCDMA) technology. It discusses the basics of WCDMA including that it uses direct sequence spread spectrum technology and differentiates users through the use of spreading codes. It also describes key aspects of WCDMA such as power control, handovers between cells, and current market adoption of WCDMA networks. The document aims to inform readers about the specifications and advantages of the 3G wireless standard known as WCDMA.
VDSL Vectoring TEST PT TELKOM ALCATEL LUCENTWahyu Nasution
This document provides a test plan for validating VDSL2 vectoring performance on an Alcatel-Lucent ISAM FD system using a 48-port VDSL2 card with board-level vectoring. The plan includes tests of vectoring gains using different profiles, functionality tests of HSI, multicast, and triple-play services, and system acceptance tests of alarm reporting and sync rates on 48 VDSL ports. Results are provided demonstrating improved downstream and upstream rates with vectoring enabled compared to the non-vectored case on a subset of profiles. Services including internet, video, and voice are also confirmed to function as expected.
This document provides an overview and specifications of ZTE networking products, including switches, routers, wireless LAN, network security, optical transmission, IP transport platforms, customer premises equipment, cloud computing, IP telephony, and multimedia conferencing products. It describes ZTE's switch product lines including the ZXR10 series of intelligent switches for small and medium businesses, the ZXR10 E-Series easy-maintenance secure switches, and the ZXR10 3900A series of L3 intelligent Ethernet switches. It provides specifications for each switch model.
The document describes the Huawei DBS3900 distributed base station solution. It consists of an indoor baseband unit called the BBU3900 and outdoor remote radio units called RRU3004. The BBU3900 provides centralized management and signaling processing for the system. It connects to the RRU3004 units via CPRI and provides the reference clock. The RRU3004 processes baseband and radio frequency signals. The solution supports flexible installation in various environments to provide wide coverage at low cost.
This document provides an overview of Huawei's NodeB equipment configurations for UMTS networks. It describes the main components of macro indoor and outdoor NodeBs including the BTS3812E, as well as distributed NodeBs and components like the BBU3806. It explains the principles of NodeB configuration for macro and distributed network scenarios.
The document discusses the IEEE 802.11 wireless local area network standards, outlining the different bands, layers, frames, modulation techniques, and security implementations defined by the 802.11 specifications for wireless networks operating at speeds up to 54 Mbps using technologies like DSSS and OFDM in the 2.4 GHz and 5 GHz bands.
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology. It discusses the basic concepts and working principles of PON networks, comparing GPON to other PON standards like EPON. The document also analyzes key GPON standards and specifications, describes the GPON network model reference, and reviews basic GPON performance parameters and network protection modes.
This document provides an overview and specifications for Motorola's fixed point-to-point wireless bridge solutions, including the PTP 100, 200, 300, 400, 500, and 600 series. It describes the key technologies used, performance capabilities, frequency bands, product options, warranties, and accessories. The document is intended to help Motorola account teams and sales channels communicate the features and benefits of these wireless bridge solutions to customers.
This document provides configuration instructions for a GPON network to deliver triple play services of HSI, VoIP, and IPTV. It describes setting up traffic tables, DBA profiles, ONT line profiles, and service profiles to map the services to VLANs and GEM ports. Finally, it details adding an ONU device and configuring service ports and native VLANs to cross connect the user and uplink sides for each service.
ZyXEL presented its networking solution and product line. It introduced its MSAP2000 multi-service access platform that integrates various telecom equipment onto a single system. The MSAP2000 provides a complete broadband access solution for telecom operators and can deliver voice, data, internet access, and video on demand services over FTTx fiber networks. ZyXEL also discussed the evolution of digital loop carriers to extend service areas using different configurations.
The document discusses the evolution of Ethernet networking standards over time. It begins with the original Ethernet created in 1976 and the IEEE 802 project launched in 1985 to set standards. Key standards discussed include Standard Ethernet from 10 Mbps to 100 Mbps Fast Ethernet to 1 Gbps Gigabit Ethernet. The standards define the data link and physical layers and underwent changes like bridging, switching, and full duplex to support higher speeds and larger networks while maintaining backward compatibility.
The H700 series cellular router:
- Provides 2G/3G/4G cellular connectivity and enables sharing of a cellular internet connection via WiFi.
- Has dual SIM card slots for redundancy and backup.
- Includes 4 LAN ports and supports additional optional features like WiFi, GPS, serial ports, video server, and internal battery.
- Is suited for applications like remote monitoring, security, utilities metering, POS terminals, traffic control, and more.
1. DSL refers to digital subscriber line technologies that provide internet access over telephone lines, including ADSL, HDSL, and VDSL.
2. DSL uses discrete multi-tone modulation to transmit data across multiple frequencies over copper telephone lines. Each frequency band carries a discrete amount of data.
3. DSL technologies have continued to evolve, with newer versions like ADSL2+ and VDSL2 providing higher download speeds by using more frequency bands and increasing data rates per band.
This document provides an overview and specifications for Huawei's DBS3900/3800 product family of remote radio units (RRUs). It describes the main RRU models - RRU3801C, RRU3804, and RRU3808. The RRUs are used in outdoor cellular installations along with indoor baseband units. The document outlines the appearance, ports, LED indicators, electrical specifications, and typical deployment scenarios for each RRU model.
We take pride in introducing ourselves to your esteemed organization. We are engaged in the business of providing Walkie Talkie and other Telecom and Security Solutions to our clients.
We are capable of giving all types of telecom spares with respect to Walkie Talkie and other Telecom and Security Products, viz: Telephone Handsets, Cords, Batteries, PTTs, Hand Held Metal Detector Chargers and Batteries, Door Frame Metal Detector Spares, etc. We do undertake maintenance contracts of various equipment with our staff of Technical Engineers and Technicians.
This document provides an overview of the new Ericsson RBS 6000 series being implemented for MTN's 3G network expansion. It describes the indoor RBS 6201 cabinet configuration being used, which includes a combination of radio and digital units. The document compares the hardware and modules of the RBS 6000 series to previous RBS 3000 and 2000 series cabinets, noting the RBS 6000 uses entirely new modules and combines functions. It also outlines the radio standard, hardware and configuration options available on the RBS 6000 series.
Main:
Industrial class,with sim card slot
Interface:1 RJ45 WAN Port + 4 RJ45 LAN Port;
Optional additional port: DB9 RS232 or RS485 port
VPN(PPTP,L2TP,IPsec,GRE),SNMP, VRRP, DDNS, DHCP, NAT/NAPT, Web, Auto-dial,always online,watch-dog;
Line WAN(xDSL) and Cellular can backup, two H800 can work as dual sim dual module backup
The document provides troubleshooting guidance for faults in GSM BTS systems. It describes common fault types including antenna & feeder faults, transmission faults, and hardware connection faults. For transmission faults, it outlines steps to determine if the issue is a broken E1 connection or frequent OML alarms. This includes performing loop tests, checking grounding settings and insulation, and verifying for transmission device or E1 interface board issues. The document also provides detailed analysis and resolution procedures for other common fault cases.
Wi max rru3702 troubleshooting guide v1.0-20100609-aAmjad Jamil
This document provides a troubleshooting guide for the WiMAX RRU3702 Radio Remote Unit. It outlines basic check items for the RRU including version information, configuration, alarms, and RF indexes. It then describes methods for checking alarms, whether alarms are shielded or deleted, and RF index ranges. The document also includes troubleshooting guides for various engineering installation and interference problems that could occur. It includes knowledge points on checking standing wave ratio during power-on and for services.
This document describes the OptiX RTN 900 microwave transmission system from Huawei. It discusses the network position and applications of the RTN 900, which can provide integrated TDM, hybrid, and packet microwave solutions. The document then covers the system architecture, including functional units, and the hardware structure. It describes the different boards that make up the RTN 900 system, including the control, interface, and auxiliary boards.
The MA5600 is a multi-service access module that provides high-speed broadband access and integrated services. It supports gigabit Ethernet switching and multi-service access to meet diverse service requirements. The MA5600 also provides quality of service to support evolving next generation networks. It has abundant port types, flexible networking solutions, carrier-class IPTV capabilities, dynamic line optimization, and strict security and reliability measures.
This document provides a user guide for the SMC7901BRA4 B1 Barricade Home Gateway ADSL Router. It contains information about installing and setting up the router, including its hardware features, package contents, location selection, and initial configuration steps. The guide also describes the router's web configuration interface, including how to view status information about the system, WAN, LAN, traffic statistics, and configure WAN settings such as ADSL modulation and ATM settings.
Reference manual-for-the-netgear-rangemax-wireless-router-wpn8241380mark scott
This document is the reference manual for the NETGEAR RangeMax Dual Band Wireless-N Router WNDR3300. It includes information about product registration, support, documentation, trademarks, conditions of use, regulatory compliance, and the product details. The manual provides documentation on basic setup, configuration, security, access restrictions, and customization of network settings for the wireless router. It contains information to help users safely setup and manage their home or small office wireless network.
The document is a user manual for the GreyRapid N Wireless Network Router. It provides an introduction to the router and its features, which include allowing multiple computers and network devices to share a single internet connection via Ethernet ports or wireless connectivity. It also lists the contents of the manual, which covers topics like system setup, configuration of wired and wireless networks, advanced functions such as quality of service, security, and troubleshooting. The manual is intended to guide users through installing and using the router to set up a home or small office network.
This document provides an overview and specifications of ZTE networking products, including switches, routers, wireless LAN, network security, optical transmission, IP transport platforms, customer premises equipment, cloud computing, IP telephony, and multimedia conferencing products. It describes ZTE's switch product lines including the ZXR10 series of intelligent switches for small and medium businesses, the ZXR10 E-Series easy-maintenance secure switches, and the ZXR10 3900A series of L3 intelligent Ethernet switches. It provides specifications for each switch model.
The document describes the Huawei DBS3900 distributed base station solution. It consists of an indoor baseband unit called the BBU3900 and outdoor remote radio units called RRU3004. The BBU3900 provides centralized management and signaling processing for the system. It connects to the RRU3004 units via CPRI and provides the reference clock. The RRU3004 processes baseband and radio frequency signals. The solution supports flexible installation in various environments to provide wide coverage at low cost.
This document provides an overview of Huawei's NodeB equipment configurations for UMTS networks. It describes the main components of macro indoor and outdoor NodeBs including the BTS3812E, as well as distributed NodeBs and components like the BBU3806. It explains the principles of NodeB configuration for macro and distributed network scenarios.
The document discusses the IEEE 802.11 wireless local area network standards, outlining the different bands, layers, frames, modulation techniques, and security implementations defined by the 802.11 specifications for wireless networks operating at speeds up to 54 Mbps using technologies like DSSS and OFDM in the 2.4 GHz and 5 GHz bands.
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology. It discusses the basic concepts and working principles of PON networks, comparing GPON to other PON standards like EPON. The document also analyzes key GPON standards and specifications, describes the GPON network model reference, and reviews basic GPON performance parameters and network protection modes.
This document provides an overview and specifications for Motorola's fixed point-to-point wireless bridge solutions, including the PTP 100, 200, 300, 400, 500, and 600 series. It describes the key technologies used, performance capabilities, frequency bands, product options, warranties, and accessories. The document is intended to help Motorola account teams and sales channels communicate the features and benefits of these wireless bridge solutions to customers.
This document provides configuration instructions for a GPON network to deliver triple play services of HSI, VoIP, and IPTV. It describes setting up traffic tables, DBA profiles, ONT line profiles, and service profiles to map the services to VLANs and GEM ports. Finally, it details adding an ONU device and configuring service ports and native VLANs to cross connect the user and uplink sides for each service.
ZyXEL presented its networking solution and product line. It introduced its MSAP2000 multi-service access platform that integrates various telecom equipment onto a single system. The MSAP2000 provides a complete broadband access solution for telecom operators and can deliver voice, data, internet access, and video on demand services over FTTx fiber networks. ZyXEL also discussed the evolution of digital loop carriers to extend service areas using different configurations.
The document discusses the evolution of Ethernet networking standards over time. It begins with the original Ethernet created in 1976 and the IEEE 802 project launched in 1985 to set standards. Key standards discussed include Standard Ethernet from 10 Mbps to 100 Mbps Fast Ethernet to 1 Gbps Gigabit Ethernet. The standards define the data link and physical layers and underwent changes like bridging, switching, and full duplex to support higher speeds and larger networks while maintaining backward compatibility.
The H700 series cellular router:
- Provides 2G/3G/4G cellular connectivity and enables sharing of a cellular internet connection via WiFi.
- Has dual SIM card slots for redundancy and backup.
- Includes 4 LAN ports and supports additional optional features like WiFi, GPS, serial ports, video server, and internal battery.
- Is suited for applications like remote monitoring, security, utilities metering, POS terminals, traffic control, and more.
1. DSL refers to digital subscriber line technologies that provide internet access over telephone lines, including ADSL, HDSL, and VDSL.
2. DSL uses discrete multi-tone modulation to transmit data across multiple frequencies over copper telephone lines. Each frequency band carries a discrete amount of data.
3. DSL technologies have continued to evolve, with newer versions like ADSL2+ and VDSL2 providing higher download speeds by using more frequency bands and increasing data rates per band.
This document provides an overview and specifications for Huawei's DBS3900/3800 product family of remote radio units (RRUs). It describes the main RRU models - RRU3801C, RRU3804, and RRU3808. The RRUs are used in outdoor cellular installations along with indoor baseband units. The document outlines the appearance, ports, LED indicators, electrical specifications, and typical deployment scenarios for each RRU model.
We take pride in introducing ourselves to your esteemed organization. We are engaged in the business of providing Walkie Talkie and other Telecom and Security Solutions to our clients.
We are capable of giving all types of telecom spares with respect to Walkie Talkie and other Telecom and Security Products, viz: Telephone Handsets, Cords, Batteries, PTTs, Hand Held Metal Detector Chargers and Batteries, Door Frame Metal Detector Spares, etc. We do undertake maintenance contracts of various equipment with our staff of Technical Engineers and Technicians.
This document provides an overview of the new Ericsson RBS 6000 series being implemented for MTN's 3G network expansion. It describes the indoor RBS 6201 cabinet configuration being used, which includes a combination of radio and digital units. The document compares the hardware and modules of the RBS 6000 series to previous RBS 3000 and 2000 series cabinets, noting the RBS 6000 uses entirely new modules and combines functions. It also outlines the radio standard, hardware and configuration options available on the RBS 6000 series.
Main:
Industrial class,with sim card slot
Interface:1 RJ45 WAN Port + 4 RJ45 LAN Port;
Optional additional port: DB9 RS232 or RS485 port
VPN(PPTP,L2TP,IPsec,GRE),SNMP, VRRP, DDNS, DHCP, NAT/NAPT, Web, Auto-dial,always online,watch-dog;
Line WAN(xDSL) and Cellular can backup, two H800 can work as dual sim dual module backup
The document provides troubleshooting guidance for faults in GSM BTS systems. It describes common fault types including antenna & feeder faults, transmission faults, and hardware connection faults. For transmission faults, it outlines steps to determine if the issue is a broken E1 connection or frequent OML alarms. This includes performing loop tests, checking grounding settings and insulation, and verifying for transmission device or E1 interface board issues. The document also provides detailed analysis and resolution procedures for other common fault cases.
Wi max rru3702 troubleshooting guide v1.0-20100609-aAmjad Jamil
This document provides a troubleshooting guide for the WiMAX RRU3702 Radio Remote Unit. It outlines basic check items for the RRU including version information, configuration, alarms, and RF indexes. It then describes methods for checking alarms, whether alarms are shielded or deleted, and RF index ranges. The document also includes troubleshooting guides for various engineering installation and interference problems that could occur. It includes knowledge points on checking standing wave ratio during power-on and for services.
This document describes the OptiX RTN 900 microwave transmission system from Huawei. It discusses the network position and applications of the RTN 900, which can provide integrated TDM, hybrid, and packet microwave solutions. The document then covers the system architecture, including functional units, and the hardware structure. It describes the different boards that make up the RTN 900 system, including the control, interface, and auxiliary boards.
The MA5600 is a multi-service access module that provides high-speed broadband access and integrated services. It supports gigabit Ethernet switching and multi-service access to meet diverse service requirements. The MA5600 also provides quality of service to support evolving next generation networks. It has abundant port types, flexible networking solutions, carrier-class IPTV capabilities, dynamic line optimization, and strict security and reliability measures.
This document provides a user guide for the SMC7901BRA4 B1 Barricade Home Gateway ADSL Router. It contains information about installing and setting up the router, including its hardware features, package contents, location selection, and initial configuration steps. The guide also describes the router's web configuration interface, including how to view status information about the system, WAN, LAN, traffic statistics, and configure WAN settings such as ADSL modulation and ATM settings.
Reference manual-for-the-netgear-rangemax-wireless-router-wpn8241380mark scott
This document is the reference manual for the NETGEAR RangeMax Dual Band Wireless-N Router WNDR3300. It includes information about product registration, support, documentation, trademarks, conditions of use, regulatory compliance, and the product details. The manual provides documentation on basic setup, configuration, security, access restrictions, and customization of network settings for the wireless router. It contains information to help users safely setup and manage their home or small office wireless network.
The document is a user manual for the GreyRapid N Wireless Network Router. It provides an introduction to the router and its features, which include allowing multiple computers and network devices to share a single internet connection via Ethernet ports or wireless connectivity. It also lists the contents of the manual, which covers topics like system setup, configuration of wired and wireless networks, advanced functions such as quality of service, security, and troubleshooting. The manual is intended to guide users through installing and using the router to set up a home or small office network.
This document provides instructions and specifications for two 150Mbps wireless N routers, the TL-WR740N and TL-WR741ND. It includes information on copyrights and trademarks, FCC compliance statements, safety instructions, and the contents of the product package. The document also contains details on connecting the router, its features such as wireless security and parental controls, and instructions for configuring the router through its web-based utility.
This document provides product documentation for the TL-WA701ND 150Mbps Wireless Lite N Access Point, including:
- An overview of the access point's features such as wireless speed and interface.
- Instructions for hardware installation including connection diagrams and basic requirements.
- Steps for configuring the access point through a web interface including wireless settings, security, DHCP, and system tools.
- Regulatory information for FCC, CE, and national restrictions in different countries.
- Declaration of conformity with relevant directives and standards for radio frequency, electromagnetic compatibility, and safety.
The document contains technical specifications, installation instructions, configuration guides, regulatory statements, and other essential information about the TL-
This document contains product documentation for the TD-W8961ND 300Mbps Wireless N ADSL2+ Modem Router, including:
- An overview of the product's specifications, features, and compliance certifications.
- Instructions for hardware installation, including information about the front and back panels, installation environment, and connecting the device.
- A quick installation guide for initial configuration of the PC and logging into the router's management interface.
- Descriptions of the software configuration interface and options for status monitoring, internet/LAN/wireless setup, firewall, routing, NAT, and advanced functions.
- Safety and regulatory information for different regions.
The document provides comprehensive information and
This document provides product specifications and regulatory compliance information for the TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router. It describes the device's hardware including front and back panels, installation instructions, and LED indicators. It also outlines the device's main features such as ADSL support, wireless networking capabilities, security features, and management tools.
This document provides product specifications and regulatory compliance information for the TD-W8151N 150Mbps Wireless N ADSL2+ Modem Router, including that it has one Ethernet port, one ADSL port, supports wireless N connectivity at up to 150Mbps, and complies with various FCC, CE and other regulatory standards.
This document provides instructions and compliance information for an 802.11g wireless broadband router. It includes:
1) A summary of the router's features and applications for wireless broadband connectivity.
2) Instructions on unpacking and setting up the router, including information on the FCC compliance and a European Union declaration of conformity.
3) A table of contents listing sections that provide details on installing and configuring the router, troubleshooting, and warranty information.
This document provides regulatory and safety information for the Nortel Secure Router 4134. It includes statements of compliance with international standards for electromagnetic emissions, immunity, and safety. It also includes national standards statements for the US, Canada, Europe, Japan, Taiwan, and South Korea. The document provides safety precautions and warnings for the router hardware and instructions on its proper use and disposal in compliance with WEEE and RoHS directives.
This document provides product specifications for a nine-band, 1.25W-to-2W software-defined remote unit (SDRU) that operates across multiple 3GPP bands from 600MHz to 2.5GHz. The SDRU can be upgraded remotely through software to add new bands or increase power for existing bands. It uses two separate units for low and high bands to take advantage of better propagation for low bands.
This document contains product documentation for the TP-LINK 300Mbps Wireless N Router, models TL-WR940N and TL-WR941ND. It includes specifications, copyright and trademark information, safety and legal compliance statements for the FCC, IC and EU. The document provides instructions on connecting the router, its main features, front and rear panel layouts, and a quick installation guide. It also outlines how to log in, view status, setup the network, and use WPS functions.
This document provides product specifications for a nine-band, 10W-20W software-defined remote unit (SDRU) that is part of JMA Wireless' TEKO distributed antenna system platform. The SDRU supports nine 3GPP bands with independent band and power upgrades available remotely. It has features such as automatic gain control, feedforward power amplifiers for interference reduction, and alarm detection for maximum quality of service. The SDRU has an IP66 enclosure rating and supports point-to-point and cascade connections with the master unit with an optical remote link up to 20 km.
This document contains documentation for the TL-WDR4300 N750 Wireless Dual Band Gigabit Router, including:
- Copyright information and trademarks
- FCC, CE, and other regulatory notices and safety information
- Specifications for the router such as wireless specifications, standards compliance, and environmental requirements
- A declaration of conformity signed by the responsible party at TP-LINK TECHNOLOGIES CO., LTD. including the company and product information
ith the widespread adoption of 4G cellular technology as well as the growing availability of 5G products and services for remote industrial applications around the world, it is no longer a matter of if but rather a matter of when 2G and 3G services are being turned off.
But don't panic, we are here to help. In this short webinar, technical engineers Wesley Nel and Ant Lane walk you through what the phase out of 2G and 3G cellular communications mean, and most importantly, how you can prepare for it.
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) technology, including:
- GPON uses wavelength division multiplexing over a single fiber for bi-directional communication between an OLT and multiple ONUs.
- Downstream transmission is broadcast while upstream uses TDMA to separate signals from multiple users.
- Standards like ITU-T G.984 specify areas like transmission speeds, frame structure, and ONU management for GPON.
- The document discusses GPON network architectures, components, protection methods, and multiplexing to transport different services.
This document contains a presentation on LTE TDD given by Bong Youl Cho of Nokia Solutions and Networks. The presentation provides an overview of LTE TDD technology, including comparisons to WiMAX and 3G TDD, details on TDD configurations and carrier aggregation, enhancements in Release 12 and beyond, and the growth of LTE TDD deployment by major operators worldwide. It aims to demonstrate that LTE TDD and FDD can be highly integrated to provide "the best LTE" network through global roaming and seamless handovers between the technologies.
This document provides an overview of GPON (Gigabit-capable Passive Optical Network) fundamentals from Huawei Technologies. It begins with basic concepts of PON networks, including the architecture and working principles. It then covers key topics like GPON standards, performance parameters, protection modes, and frame structure. The document is intended to give readers a preliminary understanding of GPON networks.
This document describes the specifications and regulatory information for the TL-MR3020 Portable 3G/4G Wireless N Router. It includes:
- Copyright and trademark information for TP-LINK
- US FCC and Canadian compliance statements regarding radio frequency radiation
- European CE Marking and other international compliance certifications
- Safety information and a list of countries where the product can be used
This document provides instructions for installing and configuring an ADSL2+ modem. It includes sections on hardware installation, connecting to the internet, configuring local network and DHCP server settings, checking status, resetting to default settings, and specifications. The document contains diagrams of the modem hardware and definitions of acronyms used.
O documento fornece instruções sobre a instalação e configuração de um modem ADSL 2+ da marca Intelbras. O modem oferece conexão à internet de até 24 Mbps e possui portas LAN e WAN, além de LEDs para indicar o status da conexão. O documento explica como conectar o modem, configurar o protocolo TCP/IP e acessar a interface web para configuração avançada.
This document provides information about the TD-W8951ND 150Mbps Wireless N ADSL2+ Modem Router, including:
1. An overview of the product's features such as ADSL connectivity, wireless networking, security protections, and management capabilities.
2. Instructions on the hardware installation including descriptions of the front and back panels and the connection process.
3. An introduction to the quick installation guide and software configuration sections that make up the rest of the document.
Este documento fornece instruções passo-a-passo para configurar um roteador D-Link DSL-2730B em modo roteador para fornecer acesso à Internet para outros dispositivos de rede. O processo envolve identificar o endereço IP do roteador, fazer login na interface web e configurar parâmetros como VPI, VCI, nome de usuário e senha PPPoE fornecidos pelo provedor de serviços de Internet.
1) O documento fornece um tutorial passo-a-passo para configurar um modem ZTE W300 como roteador, incluindo como acessar a interface do modem, selecionar o país Brasil, excluir conexões ATM existentes, configurar o VC1 para PPPoE, habilitar NAT e configurar DNS.
2) A configuração guiada ensina o usuário a acessar a interface do modem no endereço 192.168.1.1, selecionar o país Brasil, excluir conexões ATM existentes VC2 e VC3
Este documento apresenta uma tabela de tarifas para serviços prioritários de pessoa física, com valores em reais para serviços como cadastro, cartões, saques, depósitos, transferências, operações de crédito e câmbio. Algumas tarifas sofreram alterações e passarão a vigorar a partir de 02 de abril de 2012.
This document provides instructions for configuring the WL-5450AP & WL-5460AP Wireless Access Points, including an overview of features and operation modes, instructions for hardware connection and factory default settings, and a guide to the configuration interface for settings like wireless security, TCP/IP settings, and firmware upgrades.
[1] O documento fornece instruções para transformar o modem SpeedStream 5200 em um roteador, permitindo compartilhamento de internet entre computadores da rede local. [2] Originalmente, o modem funciona apenas como bridge, mas é possível atualizar o firmware para adicionar funcionalidades de roteamento. [3] As instruções passo a passo explicam como realizar a atualização de firmware e configurar o modem para operar como roteador ou bridge.
Manual de configuração modem speed stream 4200maxytetsu
Este documento fornece 23 passos para configurar um modem SpeedStream 4200 da Brasil Telecom como um roteador, incluindo restaurar as configurações de fábrica, configurar o VPI, VCI e PPPoE, e verificar a conexão.
D link dsl-2640 b - configurando em routermaxytetsu
Este documento fornece um guia passo-a-passo para configurar um roteador DSL-2640B em modo roteador, incluindo definir valores VPI e VCI, configurar PPPoE, definir DNS e reiniciar o roteador para aplicar as configurações.
D link dsl-2640 b - configurando em bridgemaxytetsu
Este documento fornece instruções passo-a-passo para configurar um modem DSL-2640B em modo bridge, incluindo como descobrir o endereço IP do modem, remover regras de conexão existentes, adicionar uma nova regra usando os valores VPI e VCI corretos, habilitar o serviço bridge e criar um discador PPPoE no Windows.
This document provides information about the TD-W8960N Wireless N ADSL2+ Modem Router, including:
- Copyright and trademark information
- Specifications for FCC compliance and RF radiation exposure
- CE marking warnings
- National restrictions on wireless frequencies
- Declaration of conformity
- Contents of the product package
The document contains information required for legal compliance as well as technical specifications and standards for the router hardware.
1. O documento é um guia para iniciantes no Ubuntu, introduzindo os principais recursos e programas.
2. Inclui instruções para instalação do Ubuntu em partições e reinstalação mantendo a pasta Home.
3. Também fornece detalhes sobre ajustes visuais, programas de internet, multimídia e outros aplicativos populares para o Ubuntu.
This document is a reference manual for the NETGEAR DM111P ADSL2+ Ethernet Modem. It provides regulatory compliance statements and product details for the DM111P modem, which is intended for home use to connect devices to the internet via an ADSL connection. The manual contains information on the Federal Communications Commission compliance, European Union compliance, and other regulatory notices as well as publication details.
How to Interpret Trends in the Kalyan Rajdhani Mix Chart.pdfChart Kalyan
A Mix Chart displays historical data of numbers in a graphical or tabular form. The Kalyan Rajdhani Mix Chart specifically shows the results of a sequence of numbers over different periods.
Introduction of Cybersecurity with OSS at Code Europe 2024Hiroshi SHIBATA
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
AI 101: An Introduction to the Basics and Impact of Artificial IntelligenceIndexBug
Imagine a world where machines not only perform tasks but also learn, adapt, and make decisions. This is the promise of Artificial Intelligence (AI), a technology that's not just enhancing our lives but revolutionizing entire industries.
Project Management Semester Long Project - Acuityjpupo2018
Acuity is an innovative learning app designed to transform the way you engage with knowledge. Powered by AI technology, Acuity takes complex topics and distills them into concise, interactive summaries that are easy to read & understand. Whether you're exploring the depths of quantum mechanics or seeking insight into historical events, Acuity provides the key information you need without the burden of lengthy texts.
Main news related to the CCS TSI 2023 (2023/1695)Jakub Marek
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
Threats to mobile devices are more prevalent and increasing in scope and complexity. Users of mobile devices desire to take full advantage of the features
available on those devices, but many of the features provide convenience and capability but sacrifice security. This best practices guide outlines steps the users can take to better protect personal devices and information.
5th LF Energy Power Grid Model Meet-up SlidesDanBrown980551
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdfMalak Abu Hammad
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slackshyamraj55
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
HCL Notes and Domino License Cost Reduction in the World of DLAUpanagenda
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Taking AI to the Next Level in Manufacturing.pdfssuserfac0301
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Webinar: Designing a schema for a Data WarehouseFederico Razzoli
Are you new to data warehouses (DWH)? Do you need to check whether your data warehouse follows the best practices for a good design? In both cases, this webinar is for you.
A data warehouse is a central relational database that contains all measurements about a business or an organisation. This data comes from a variety of heterogeneous data sources, which includes databases of any type that back the applications used by the company, data files exported by some applications, or APIs provided by internal or external services.
But designing a data warehouse correctly is a hard task, which requires gathering information about the business processes that need to be analysed in the first place. These processes must be translated into so-called star schemas, which means, denormalised databases where each table represents a dimension or facts.
We will discuss these topics:
- How to gather information about a business;
- Understanding dictionaries and how to identify business entities;
- Dimensions and facts;
- Setting a table granularity;
- Types of facts;
- Types of dimensions;
- Snowflakes and how to avoid them;
- Expanding existing dimensions and facts.
3. European Union Statement of Compliance
Hereby, NETGEAR, Inc. declares that this modem is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Èesky NETGEAR, Inc. tímto prohlašuje, že tento DM111P ADSL2+ Ethernet Modem je ve
[Czech] shodì se základními požadavky a dalšími pøíslušnými ustanoveními smìrnice 1999/5/ES.
Dansk Undertegnede NETGEAR, Inc. erklærer herved, at følgende udstyr DM111P ADSL2+
[Danish] Ethernet Modem overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/
EF.
Deutsch Hiermit erklärt NETGEAR, Inc., dass sich das Gerät DM111P ADSL2+ Ethernet Modem
[German] in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen
einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Eesti Käesolevaga kinnitab NETGEAR, Inc. seadme DM111P ADSL2+ Ethernet Modem
[Estonian] vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele
asjakohastele sätetele.
English Hereby, NETGEAR, Inc., declares that this DM111P ADSL2+ Ethernet Modem is in
compliance with the essential requirements and other relevant provisions of Directive
1999/5/EC.
Español Por medio de la presente NETGEAR, Inc. declara que el DM111P ADSL2+ Ethernet
[Spanish] Modem cumple con los requisitos esenciales y cualesquiera otras disposiciones
aplicables o exigibles de la Directiva 1999/5/CE.
Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ NETGEAR, Inc. ΔΗΛΩΝΕΙ ΟΤΙ DM111P ADSL2+ Ethernet Modem
[Greek] ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ
ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français Par la présente NETGEAR, Inc. déclare que l'appareil DM111P ADSL2+ Ethernet
[French] Modem est conforme aux exigences essentielles et aux autres dispositions pertinentes de
la directive 1999/5/CE.
Italiano Con la presente NETGEAR, Inc. dichiara che questo DM111P ADSL2+ Ethernet
[Italian] Modem è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla
direttiva 1999/5/CE.
Latviski Ar šo NETGEAR, Inc. deklarç, ka DM111P ADSL2+ Ethernet Modem atbilst Direktîvas
[Latvian] 1999/5/EK bûtiskajâm prasîbâm un citiem ar to saistîtajiem noteikumiem.
Lietuviø Šiuo NETGEAR, Inc. deklaruoja, kad šis DM111P ADSL2+ Ethernet Modem atitinka
[Lithuanian] esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands Hierbij verklaart NETGEAR, Inc. dat het toestel DM111P ADSL2+ Ethernet Modem in
[Dutch] overeenstemming is met de essentiële eisen en de andere relevante bepalingen van
richtlijn 1999/5/EG.
iii
v1.0, August 2006
4. Malti Hawnhekk, NETGEAR, Inc., jiddikjara li dan DM111P ADSL2+ Ethernet Modem
[Maltese] jikkonforma mal-tiijiet essenzjali u ma provvedimenti orajn relevanti li hemm fid-Dirrettiva
1999/5/EC.
Magyar Alulírott, NETGEAR, Inc. nyilatkozom, hogy a DM111P ADSL2+ Ethernet Modem
[Hungarian] megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb
elõírásainak.
Polski Niniejszym NETGEAR, Inc. oœwiadcza, ¿e DM111P ADSL2+ Ethernet Modem jest
[Polish] zgodny z zasadniczymi wymogami oraz pozosta³ymi stosownymi postanowieniami
Dyrektywy 1999/5/EC.
Português NETGEAR, Inc. declara que este DM111P ADSL2+ Ethernet Modem está conforme
[Portuguese] com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko NETGEAR, Inc. izjavlja, da je ta DM111P ADSL2+ Ethernet Modem v skladu z
[Slovenian] bistvenimi zahtevami in ostalimi relevantnimi doloèili direktive 1999/5/ES.
Slovensky NETGEAR, Inc. týmto vyhlasuje, že DM111P ADSL2+ Ethernet Modem spåòa
[Slovak] základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi NETGEAR, Inc. vakuuttaa täten että DM111P ADSL2+ Ethernet Modem tyyppinen laite
[Finnish] on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.
Svenska Härmed intygar NETGEAR, Inc. att denna [utrustningstyp] står I överensstämmelse med
[Swedish] de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
A printed copy of the EU Declaration of Conformity certificate for this product is provided in the DM111P
product package.
Bestätigung des Herstellers/Importeurs
Es wird hiermit bestätigt, daß das DM111P ADSL2+ Ethernet Modem gemäß der im BMPT-AmtsblVfg 243/1991 und
Vfg 46/1992 aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte (z.B. Testsender)
kann jedoch gewissen Beschränkungen unterliegen. Lesen Sie dazu bitte die Anmerkungen in der Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß dieses Gerät auf den Markt
gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung der Vorschriften hin zu überprüfen.
Certificate of the Manufacturer/Importer
It is hereby certified that the DM111P ADSL2+ Ethernet Modem has been suppressed in accordance with the conditions
set out in the BMPT-AmtsblVfg 243/1991 and Vfg 46/1992. The operation of some equipment (for example, test
transmitters) in accordance with the regulations may, however, be subject to certain restrictions. Please refer to the notes
in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this equipment on the market
and has been granted the right to test the series for compliance with the regulations.
iv
v1.0, August 2006
5. Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the second category (information equipment to be used in a residential area or an adjacent area
thereto) and conforms to the standards set by the Voluntary Control Council for Interference by Data Processing
Equipment and Electronic Office Machines aimed at preventing radio interference in such residential areas.
When used near a radio or TV receiver, it may become the cause of radio interference.
Read instructions for correct handling.
Product and Publication Details
Model Number: DM111P
Publication Date: August 2006
Product Family: Modem
Product Name: DM111P ADSL2+ Ethernet Modem
Home or Business Product: Home
Language: English
Publication Part Number: Beta
v
v1.0, August 2006
7. Contents
DM111P ADSL2+ Ethernet Modem Reference Manual
Chapter 1
Introduction
About the Modem ...........................................................................................................1-1
Key Features ..................................................................................................................1-1
Easy Installation and Management ..........................................................................1-2
Protocol Support ......................................................................................................1-2
Auto Sensing and Auto Uplink™ LAN Ethernet Connections ..................................1-3
What’s in the Box? ..........................................................................................................1-4
The Modem’s Front Panel ..............................................................................................1-5
The Router’s Rear Panel ................................................................................................1-6
Chapter 2
Connecting to the Internet
Information You Need Before You Begin ........................................................................2-1
Connecting to the Internet ..............................................................................................2-1
Using the Setup Wizard on the CD ..........................................................................2-2
Using the Web Browser Based Modem Management Utility ...................................2-2
Setting Up Your Ethernet Connection .............................................................................2-8
Chapter 3
Managing Your Modem
Changing the Password .................................................................................................3-1
Backing Up, Restoring, or Erasing Your Settings ...........................................................3-2
How to Back Up the Configuration to a File .............................................................3-2
How to Restore the Configuration from a File ..........................................................3-2
How to Erase the Configuration ...............................................................................3-2
Upgrading the Modem’s Firmware .................................................................................3-3
How to Upgrade the Modem Firmware ....................................................................3-3
Network Management Information .................................................................................3-5
vii
v1.0, August 2006
8. Viewing Modem Status .............................................................................................3-5
Viewing the ADSL Status .........................................................................................3-7
Running Diagnostic Utilities and Rebooting the Modem ................................................3-8
Chapter 4
Troubleshooting
Basic Functioning ...........................................................................................................4-1
Power LED Not On ...................................................................................................4-2
Power LED Never Turns Green ...............................................................................4-2
ADSL LED not On or Blinking ..................................................................................4-2
LAN or Internet Port LEDs Not On ...........................................................................4-3
Troubleshooting the Web Management Interface ...........................................................4-4
Troubleshooting the Internet Connection ........................................................................4-5
Troubleshooting Internet Browsing ..........................................................................4-7
Restoring the Default Configuration and Password ........................................................4-7
Using the Reset button .............................................................................................4-7
Appendix A
Technical Specifications
Appendix B
Related Documents
viii
v1.0, August 2006
9. About This Manual
The NETGEAR® DM111P ADSL2+ Ethernet Modem Reference Manual describes how to install,
configure and troubleshoot the DM111P ADSL2+ Ethernet Modem.The information is this
manual is intended for readers with intermediate computer and Internet skills.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical Conventions. This manual uses the following typographical conventions::
Italics Emphasis, books, CDs, URL names
Bold User input
Fixed Screen text, file and server names, extensions, commands, IP addresses
• Formats. This manual uses the following formats to highlight special messages::
Note: This format is used to highlight information of importance or special interest.
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Danger: This is a safety warning. Failure to take heed of this notice may result in
personal injury or death.
1
v1.0, August 2006
10. DM111P ADSL2+ Ethernet Modem Reference Manual
• Scope. This manual is written for the ADSL2+ Modem according to these specifications:
Product Version DM111P ADSL2+ Ethernet Modem
Manual Publication Date August 2006
For more information about network, Internet technologies, see the links to the NETGEAR
website in Appendix B, “Related Documents”.
Note: Product updates are available on the NETGEAR, Inc. website at
http://kbserver.netgear.com/products/DM111P.asp.
How to Use This Manual
The HTML version of this manual includes the following:
• Buttons, and , for browsing forwards or backwards through the manual one page
at a time
• A button that displays the table of contents and an button. Double-click on a
link in the table of contents or index to navigate directly to where the topic is described in the
manual.
• A button to access the full NETGEAR, Inc. online knowledge base for the product
model.
• Links to PDF versions of the full manual and individual chapters.
How to Print this Manual
To print this manual you can choose one of the following several options, according to your needs.
• Printing a Page in the HTML View.
Each page in the HTML version of the manual is dedicated to a major topic. Use the Print
button on the browser toolbar to print the page contents.
• Printing a Chapter.
Use the PDF of This Chapter link at the top left of any page.
2
v1.0, August 2006
11. DM111P ADSL2+ Ethernet Modem Reference Manual
– Click the PDF of This Chapter link at the top right of any page in the chapter you want to
print. The PDF version of the chapter you were viewing opens in a browser window.
– Your computer must have the free Adobe Acrobat reader installed in order to view and
print PDF files. The Acrobat reader is available on the Adobe Web site at
http://www.adobe.com.
– Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
• Printing the Full Manual.
Use the Complete PDF Manual link at the top left of any page.
– Click the Complete PDF Manual link at the top left of any page in the manual. The PDF
version of the complete manual opens in a browser window.
– Click the print icon in the upper left of the window.
Tip: If your printer supports printing two pages on a single sheet of paper, you can
save paper and printer ink by selecting this feature.
3
v1.0, August 2006
13. Chapter 1
Introduction
This chapter describes the features of the NETGEAR DM111P ADSL2+ Ethernet Modem, the
packaging list, and describes the connectors, LEDs, and pushbuttons on the front and rear panels. .
Note: If you are unfamiliar with networking and routing, refer to “Internet Networking
and TCP/IP Addressing:” in Appendix B to become more familiar with the terms
and procedures used in this manual.
About the Modem
The modem provides an always-on Internet connection for home and office networks. The 24-
Mbps downstream and 1.5-Mbps upstream throughput delivers true broadband performance. The
modem is ideal for seting up your network with related NETGEAR routers, such as the 108 Mbps
Wireless Firewall Router (GT624) or the 54 Mbps Wireless Router (WGR614).
Key Features
The ADSL2+ Modem provides the following features:
• Supports the full range of Asynchronous Digital Subscriber Line (ADSL) standards
• Easy, Web-based setup for installation and management
• Extensive Internet protocol support
• 10/100 Mbps auto sensing and Auto Uplink™ (Auto MDI-X feature that eliminates the need
for crossover cables) LAN Ethernet connections
These features are discussed below.
Introduction 1-1
v1.0, August 2006
14. DM111P ADSL2+ Ethernet Modem Reference Manual
Easy Installation and Management
You can install, configure, and operate the DM111P within minutes after connecting it to the
network. The following features simplify installation and management tasks:
• Browser-based management
Browser-based configuration allows you to easily configure your modem from almost any
type of personal computer, such as Windows, Macintosh, or Linux. A user-friendly Setup
Wizard is provided and online help documentation is built into the browser-based Web
Management Interface.
• Smart Wizard
A wizard built into the modem automatically senses the type of Internet connection, asking
you only for the information required for your type of ISP account.
• Diagnostic functions
The modem incorporates built-in diagnostic functions such as Ping, DNS lookup, and remote
reboot. These functions allow you to test Internet connectivity and reboot the modem. You can
use these diagnostic functions directly from the DM111P when you are connected on the LAN
or when you are connected over the Internet via the remote management function.
• Visual monitoring
The modem’s front panel LEDs provide an easy way to monitor its status and activity.
• Flash erasable programmable read-only memory (EPROM) for firmware upgrades.
Protocol Support
The DM111P supports Transmission Control Protocol/Internet Protocol (TCP/IP) and Routing
Information Protocol (RIP). “Internet Networking and TCP/IP Addressing:” in Appendix B
provides further information on TCP/IP.
• Automatic Configuration of Attached PCs by DHCP
The DM111P dynamically assigns network configuration information, including IP, modem,
and domain name server (DNS) addresses, to attached PCs on the LAN using the Dynamic
Host Configuration Protocol (DHCP). This feature greatly simplifies configuration of PCs on
your local network.
• PPP over Ethernet (PPPoE)
PPP over Ethernet is a protocol for connecting remote hosts to the Internet over an ADSL
connection by simulating a dial-up connection. This feature eliminates the need to run a login
program such as EnterNet or WinPOET on your computer.
1-2 Introduction
v1.0, August 2006
15. DM111P ADSL2+ Ethernet Modem Reference Manual
• PPP over ATM (PPPoA)
PPP over ATM is a protocol for connecting remote hosts to the Internet over an ADSL
connection by simulating an ATM connection.
Auto Sensing and Auto Uplink™ LAN Ethernet Connections
With its internal 10/100 switch, the DM111P can connect to either a 10 Mbps standard Ethernet
network or a 100 Mbps Fast Ethernet network. The local LAN ports are autosensing and capable
of full-duplex or half-duplex operation.
The modem incorporates Auto UplinkTM technology. Each local Ethernet port will automatically
sense whether the Ethernet cable plugged into the port should have a ‘normal’ connection such as
to a computer or an ‘uplink’ connection such as to a switch or hub. That port will then configure
itself to the correct configuration. This feature also eliminates the need to worry about crossover
cables, as Auto Uplink will accommodate either type of cable to make the right connection.
Introduction 1-3
v1.0, August 2006
16. DM111P ADSL2+ Ethernet Modem Reference Manual
What’s in the Box?
The product package should contain the following items:
• DM111P ADSL2+ Ethernet Modem
• AC power adapter (varies by region)
• Category 5 (Cat 5) Ethernet cable
• Telephone cable with RJ-11 connector (A-tick certified)
• Microfilter in some countries (type varies by region)
• Resource CD, including this guide
• Warranty and Support Information Cards
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
1-4 Introduction
v1.0, August 2006
17. DM111P ADSL2+ Ethernet Modem Reference Manual
The Modem’s Front Panel
The DM111P ADSL2+ Ethernet Modem front panel shown below contains status LEDs.
1 2 3 4
Figure 1-1
You can use the LEDs to verify various conditions. Table 1-1 lists and describes each LED on the
front panel of the modem. These LEDs are green when lit.
Table 1-1. LED Descriptions
Label Activity Description
Solid On (Green) Power is supplied and the modem in its normal operating mode.
Blinking (Green) Firmware update is in progress
1. Power Solid On (Red) Self test is in progress or self-test failed
Off Power is not supplied to the modem.
Solid On (Green) A device is connected to the yellow Ethernet port.
2. LAN Off No device is connected to the yellow Ethernet port.
Solid On (Green) The modem is synchronized with your service provider’s DSLAM.
3. ADSL Blinking (Green) The modem is synchronizing with your service provider;s DSLAM.
Off No ADSL link detected.
Solid On (Green) Internet connection is active.
4. Internet Off Modem is powered off, or is in bridged mode, or there is no ADSL
connection.
Introduction 1-5
v1.0, August 2006
18. DM111P ADSL2+ Ethernet Modem Reference Manual
The Router’s Rear Panel
The rear panel of the DM111P ADSL2+ Ethernet Modem (Figure 1-2) contains ADSL and
Ethernet port connections, and reset and reboot switches.
1 2 3 4 5
Figure 1-2
Viewed from left to right, the rear panel contains the following elements:
1. RJ-11 ADSL port for connecting the modem to an ADSL line
2. Factory default reset push button
3. Ethernet RJ-45 port for connecting the modem to your PC or router
4. On/off switch
5. AC power adapter inlet
1-6 Introduction
v1.0, August 2006
19. Chapter 2
Connecting to the Internet
This chapter describes the various ways you can connect your DM111P ADSL2+ Ethernet Modem
to the Internet.
Information You Need Before You Begin
Before you attempt to connect to the Internet you will need the information provided by your
Internet Service Provider (ISP) when you opened your account. At a minimum, you will need your
login account name and password. The Setup Wizard may find the type of protocol used by your
ISP, and other configuration parameters automatically, or it may prompt you for the following
parameters:
• Virtual Path Identifier (VPI)
• Virtual Circuit Identifier (VCI)
• Bridging protocol (PPPoA, PPPoE, or RFC2684)
• Multiplexing method, which may be one of the following:
– VIrtual Circuit (VC) based (usually used by PPPoA protocol)
– Logical Link Control (LLC) based (usually used by PPPoE and RFC2684 protocols)
• Maximum Transmission Unit (MTU) size (usually 1500 bytes)
Connecting to the Internet
If the modem was provided by your ISP or you need assistance with physically connecting your
modem, use the Setup Wizard on the CD to connect to the Internet. If the modem was not provided
by your ISP and you do not need step-by-step assistance with physically connecting it, use the
web-browser-based configuration utility to set up the Internet configuration parameters.
Connecting to the Internet 2-1
v1.0, August 2006
20. DM111P ADSL2+ Ethernet Modem Reference Manual
Using the Setup Wizard on the CD
The most reliable way to connect to the Internet is by clicking the Setup button on the CD. The CD
will provide detailed instructions for physically connecting your modem to the ADSL line and
your local network. In addition, the Setup Wizard may prompt you for the connection
configuration parameters listed in the preceding section.
Using the Web Browser Based Modem Management Utility
Connecting ADSL Microfilters to your Telephone Equipment
ADSL technology uses the same wires as your telephone service. However, ADSL adds signals to
the telephone lines which create noise in the telephone service. You must use ADSL microfilters
to filter out these signals before they reach your telephone.
Note: If you purchased the modem in a country where a microfilter is not included, you
must acquire one.
Using ADSL Microfilters. Each device such as a telephone, fax machine, answering machine,
or caller ID display will require an ADSL microfilter.
Phone
Figure 2-1
Warning: Do not connect the modem to the ADSL line through a microfilter unless the
microfilter is a combination microfilter/splitter specifically designed for this
purpose. Doing so will prevent block your connection to the Internet. If you
have any doubts about this, connect the modem directly to the ADSL line.
2-2 Connecting to the Internet
v1.0, August 2006
21. DM111P ADSL2+ Ethernet Modem Reference Manual
Using ADSL Microfilters with Built-In Splitters. Use an ADSL microfilter with built-in
splitter when there is a single wall outlet that must provide connectivity for both the modem and
telephone equipment.
ADSL
Line
Pho
ne
Figure 2-2
Connecting your Modem to your Computer
Before starting the utility, physically connect the modem as follows:
1. Connect the yellow Ethernet cable between the yellow Ethernet port on the modem and the
Ethernet port on your PC.
Note: If you intend to connect to a router, do so after you have successfully obtained
an Internet connection when your modem is directly connected to the PC.
Refer to the documentation that came with the router for its installation
instructions.
2. Connect the ADSL port on your modem to your telephone jack.
PC Ethernet Port
Telephone Jack
DM111 ADSL2+ Ethernet Modem
Figure 2-3
Connecting to the Internet 2-3
v1.0, August 2006
22. DM111P ADSL2+ Ethernet Modem Reference Manual
3. Apply power to the modem and PC, switch them on, and log in to the Windows operating
system using an account that has administration privileges.
Opening the Web-Based Modem Management Utility
Use the modem management utility to configure the Internet connection as follows:
1. On your PC, open a Web browser, such as Microsoft Internet Explorer, and type the URL
http://192.168.0.1. in the address box. A dialog box will be displayed prompting you for a user
name and password.
Figure 2-4
Note: After you open the utility, you will have the option of changing the modem’s
LAN IP address. If you do so, you will need to use the revised IP address to
access the login dialog box for the utility.
2. Type admin for the user name, password for the password, and click OK to open the main
utility window in your web browser. Once you have logged in, you will have the option of
changing the password.
2-4 Connecting to the Internet
v1.0, August 2006
23. DM111P ADSL2+ Ethernet Modem Reference Manual
The utility will display a window that is split into four areas: A banner at the top, the main
menu on the left, the workspace area in the center, and help text on the right. Throughout the
rest of this manual, diagrams showing the utility display output will be restricted to the
workspace area.
Banner Area
Main Menu Workspace Area Help Text
Figure 2-5
Connecting to the Internet 2-5
v1.0, August 2006
24. DM111P ADSL2+ Ethernet Modem Reference Manual
Using the Web Based Utility to Connect to the Internet
Use the web-browser-based modem management utility to configure the Internet connection as
follows:
1. Click Setup Wizard in the main menu.
Figure 2-6
2. If you want the setup wizard to attempt to detect the configuration settings, click the Yes radio
button and continue from step 4. If you have collected all the informaton listed in
“Information You Need Before You Begin” on page 2-1, click the No radio button and
continue from step 5.
3. If you selected Yes in step 3, the utility will display the detected connection type and prompt
you for a login name and password.
Figure 2-7
2-6 Connecting to the Internet
v1.0, August 2006
25. DM111P ADSL2+ Ethernet Modem Reference Manual
4. If, in step 3, you elected to configure the modem yourself, the utility will display the ADSL
Settings page.
Figure 2-8
Set the fields according to the information provided to you by your ISP, and then click Apply.
5. If the main menu displays a Restart button, click it to re-initialize the modem, so that the new
settings can take effect.
Note: The ADSL settings, shown in Figure 2-8, can be viewed at any time by
selecting ADSL Settings from the Setup section of the main menu.
Connecting to the Internet 2-7
v1.0, August 2006
26. DM111P ADSL2+ Ethernet Modem Reference Manual
Setting Up Your Ethernet Connection
If you intend to connect your modem to a router then, once you are connected to the Internet as
described in the preceding section, use the web-browser-based modem-management utility to
configure the Local Area Network Internet Protocol (LAN IP) settings, as follows:
1. If you have not already done so, open the web-based utility as described in “Opening the Web-
Based Modem Management Utility” on page 2-4.
2. Select LAN IP Setup from the main menu.
Figure 2-9
3. Check the LAN IP address of your router, which is usually printed on a label on the bottom or
at the rear of the device. Note how the address is comprised of four numbers separated by
period characters. If necessary, change the LAN IP address of the modem so that the two left-
most numbers of the address are the same as the two left-most numbers of the router’s LAN IP
address, and the third number in the modem’s address is different from the third number in the
router’s address. For example, if the router’s LAN IP address is the same as the modem’s
default address (192.168.0.1), change the LAN IP address of the modem to 192.168.1.1.
Tip: If you change the LAN IP address of the modem, write the new address on a
sticky label and attach it to the bottom of the unit. You will need the new
address to access the modem management utility in the future.
2-8 Connecting to the Internet
v1.0, August 2006
27. DM111P ADSL2+ Ethernet Modem Reference Manual
4. By default, most routers (and all NETGEAR routers) include an active DHCP server. If this is
the case for your router, click the Off radio button to disable the DHCP server in the modem.
5. If you changed the LAN IP address or DHCP server setting, click Apply to make the new
settings take effect.
Note: If you change the LAN IP address, you will lose your connection to the modem
management utility. You will need to type the new IP address into your
browser address box to re-access the utility.
Connecting to the Internet 2-9
v1.0, August 2006
28. DM111P ADSL2+ Ethernet Modem Reference Manual
2-10 Connecting to the Internet
v1.0, August 2006
29. Chapter 3
Managing Your Modem
This chapter describes how to perform management tasks on your DM111P ADSL2+ Ethernet
Modem.
All sections in this chapter refer to functions in the modem management utility, and assumes the
utility has been opened in your web browser, as described in “Opening the Web-Based Modem
Management Utility” on page 2-4.
Changing the Password
To keep your modem configuration settings secure, you can change the password needed to access
the modem management utility, as folllows:
1. Click Set Password in the Maintenance section of the main menu.
Figure 3-1
2. Type the new password where prompted, and click Apply.
Managing Your Modem 3-1
v1.0, August 2006
30. DM111P ADSL2+ Ethernet Modem Reference Manual
Backing Up, Restoring, or Erasing Your Settings
The configuration settings of the ADSL2+ Modem are stored in a configuration file in the modem.
This file can be backed up to your computer, restored, or reverted to factory default settings. The
procedures below explain how to do these tasks.
How to Back Up the Configuration to a File
1. From the Maintenance heading of the Main Menu, select the Backup Settings menu as seen in
Figure 3-2.
Figure 3-2
2. Click Backup to save a copy of the current settings.
3. Store the .cfg file on a computer on your network.
How to Restore the Configuration from a File
1. From the Maintenance heading of the Main Menu, select the Settings Backup menu as seen in
Figure 3-2.
2. Enter the full path to the file on your network or click the Browse button to locate the file.
3. When you have located the .cfg file, click the Restore button to upload the file to the modem.
4. The modem will then reboot automatically.
How to Erase the Configuration
It is sometimes desirable to restore the modem to the factory default settings. This can be done by
using the Erase function.
3-2 Managing Your Modem
v1.0, August 2006
31. DM111P ADSL2+ Ethernet Modem Reference Manual
1. To erase the configuration, from the Maintenance menu Settings Backup link, click the Erase
button on the screen.
2. The modem will then reboot automatically.
After an erase, the modem's password will be password, the LAN IP address will be
192.168.0.1, and the modem's DHCP client will be enabled.
Note: To restore the factory default configuration settings without knowing the login
password or IP address, you must use the Default Reset button on the rear
panel of the modem; see Figure 2-4 on page 2-4.
Upgrading the Modem’s Firmware
The software of the ADSL2+ Modem is stored in FLASH memory, and can be upgraded as new
software is released by NETGEAR.
Upgrade files can be downloaded from NETGEAR's Web site. If the upgrade file is compressed
(.ZIP file), you must first extract the binary (.BIN or .IMG) file before uploading it to the modem.
How to Upgrade the Modem Firmware
Note: NETGEAR recommends that you back up your configuration before doing a
firmware upgrade. After the upgrade is complete, you may need to restore your
configuration settings.
1. Download and unzip the new software file from NETGEAR.
The Web browser used to upload new firmware into the modem must support HTTP uploads.
NETGEAR recommends using Microsoft Internet Explorer 5.0 or above.
Managing Your Modem 3-3
v1.0, August 2006
32. DM111P ADSL2+ Ethernet Modem Reference Manual
2. From the Main Menu of the browser interface, under the Maintenance heading, select the
Modem Upgrade heading.
Figure 3-3
3. Click Browse to locate the binary (.BIN or .IMG) upgrade file.
4. Click Firmware Upgrade.
Warning: When uploading software to the modem, it is important not to interrupt
the Web browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it may corrupt the software. When the
upload is complete, your modem will automatically restart. The upgrade
process will typically take about two minutes. In some cases, you may
need to clear the configuration and reconfigure the modem after
upgrading.
3-4 Managing Your Modem
v1.0, August 2006
33. DM111P ADSL2+ Ethernet Modem Reference Manual
Network Management Information
The DM111P provides a variety of status and usage information which is discussed below.
Viewing Modem Status
From the Maintenance section of the main menu select Modem Status to view the screen in
Figure 3-4.
Figure 3-4
Managing Your Modem 3-5
v1.0, August 2006
34. DM111P ADSL2+ Ethernet Modem Reference Manual
This screen shows the following parameters:
Table 3-1. Menu 3.2 - Modem Status Fields
Field Description
System Up Time The time that the modem has been connected to the Internet in the
format days:hours:minutes:seconds.
Account Name The Account Name assigned to the modem during setup.
Firmware Version Displays the modem firmware version. This value will change if you
upgrade your modem.
ADSL Port These parameters apply to the Internet (ADSL) port of the modem.
MAC Address Displays the Ethernet MAC address being used by the Internet (ADSL)
port of the modem.
IP Address Displays the IP address being used by the Internet (ADSL) port of the
modem. If no address is shown, the modem cannot connect to the
Internet.
Network Type The network type depends on your ISP.
IP Subnet Mask This field displays the IP Subnet Mask being used by the Internet (ADSL)
port of the modem.
Domain Name Server (DNS) Displays the DNS Server IP addresses being used by the modem. These
addresses are usually obtained dynamically from the ISP.
LAN Port These parameters apply to the Ethernet port of the modem.
MAC Address Displays the Ethernet MAC address being used by the Local (LAN) port
of the modem.
IP Address Displays the IP address being used by the Local (LAN) port of the
modem. The default is 192.168.0.1.
DHCP If OFF, the modem will not assign IP addresses to PCs on the LAN.
If ON, the modem will assign IP addresses to PCs on the LAN.
IP Subnet Mask Displays the IP Subnet Mask being used by the Local (LAN) port of the
modem. The default is 255.255.255.0.
Modem These parameters apply to the ADSL port of the modem.
Modem Status The connection status of the modem.
Downstream Speed The speed at which the modem is receiving data from the ADSL line.
Upstream Speed The speed at which the modem is transmitting data to the ADSL line.
VPI The Virtual Path Identifier setting.
VCI The Virtual Channel Identifier setting.
3-6 Managing Your Modem
v1.0, August 2006
35. DM111P ADSL2+ Ethernet Modem Reference Manual
Viewing the ADSL Status
From the Maintenance section of the main menu, click ADSL Line Status.:
Figure 3-5
The upper table indicates how the modem has detected the ADSL parameters are configured,
except for the “Line Up Time”, which indicates the time elapsed since the last reset or power
cycle.
The lower table provides information about the quality of upstream and downstream data. These
statistics will be of interest to your technical support representative if you are having problems
obtaining or maintaining a connection.
Managing Your Modem 3-7
v1.0, August 2006
36. DM111P ADSL2+ Ethernet Modem Reference Manual
Table 3-1. Router Statistics Fields
Field Description
Line Rate Average data rates.
Attainable Line The maximum attainable line rates. Typically, the downstream speed is faster than the
Rate upstream speed.
Noise Margin This is the signal-to-noise ratio and is a measure of the quality of the signal on the line.
The higher the margin, the better the quality.
Line Attenuation The line attenuation will increase the further you are physically located from your ISP’s
facilities.
Output Power Indicates the strength of the upstream and downstream signals.
Clicking the More Information link will provide more details about the quality of the traffic sent
and received, which also may be of interest to your technical support representative if you are
having problems obtaining or maintaining a connection.
Running Diagnostic Utilities and Rebooting the Modem
The ADSL2+ Modem has a diagnostics feature. You can use the diagnostics menu to perform the
following functions from the modem:
• Performa a diagnostic test to check that the unit is working properly.
• Display the Routing Table to identify what other modems the modem is communicating with.
• Reboot the modem to enable new network configurations to take effect or to clear problems
with the modem’s network connection.
3-8 Managing Your Modem
v1.0, August 2006
37. DM111P ADSL2+ Ethernet Modem Reference Manual
From the Maintenance section of the main menu select Diagnostics.
Figure 3-6
If you click Run Diagnostic Tests, the utility will run and display the test results, similar to the
following:
Figure 3-7
Managing Your Modem 3-9
v1.0, August 2006
38. DM111P ADSL2+ Ethernet Modem Reference Manual
The following diagram is a typical routing table, shown when you click Display.
Figure 3-8
3-10 Managing Your Modem
v1.0, August 2006
39. Chapter 4
Troubleshooting
This chapter gives information about troubleshooting your DM111P ADSL2+ Ethernet Modem.
After each problem description, instructions are provided to help you diagnose and solve the
problem. For the common problems listed, go to the section indicated.
• Is the modem on?
• Have I connected the modem correctly?
Go to “Basic Functioning” on page 4-1.
• I can’t access the modem’s configuration with my browser.
Go to “Troubleshooting the Web Management Interface” on page 4-4.
• I’ve configured the modem but I can’t access the Internet.
Go to “Troubleshooting the Internet Connection” on page 4-5.
• I can’t remember the modem’s management utility password.
Go to “Restoring the Default Configuration and Password” on page 4-7.
• I want to clear the modem configuration and start over again.
Go to “Restoring the Default Configuration and Password” on page 4-7.
Basic Functioning
After you turn on power to the modem, the following sequence of events should occur:
1. When power is first applied, verify that the Power LED initially displays red to indicate that
the self-test procedure is running (see “The Modem’s Front Panel” on page 1-5 for an
illustration and explanation of the LEDs).
2. After approximately 10 seconds, verify that:
a. The Power LED changes color from red to green.
b. The LAN port LEDs is lit to indicate that the modem is connected to your PC or router.
Troubleshooting 4-1
v1.0, August 2006
40. DM111P ADSL2+ Ethernet Modem Reference Manual
c. The ADSL port LED is lit, indicating that your modem is synchronized to your ISP’s
DSLAM.
d. The Internet LED is lit to indicate that you have an Internet connection.
If any of these conditions does not occur, refer to the appropriate following section.
Power LED Not On
If the Power and other LEDs are off when your modem is turned on:
• Make sure that the power cord is properly connected to your modem, that the power supply
adapter is properly connected to a functioning power outlet, and the power switch on the back
of the modem is pressed in.
• Check that you are using the 12 V DC power adapter supplied by NETGEAR for this product.
If the error persists, you have a hardware problem and should contact technical support.
Power LED Never Turns Green
If the Power LED never turns green, the modem’s self-test procedure failed.
• Cycle the power to see if the modem recovers.
• Clear the modem’s configuration to factory defaults. This will set the modem’s IP address to
192.168.0.1. This procedure is explained in “Using the Reset button” on page 4-7.
If the error persists, you might have a hardware problem and should contact technical support.
ADSL LED not On or Blinking
If the ADSL LED is not lit, no ADSL link is detected. Check the following:
• Make sure that the telephone jack is live—temporarily connect a standard telephone to the
telephone jack to check for a dial tone.
• Make sure that the telephone cable connections are secure at the modem and at the ADSL-
capable telephone jack.
If the ADSL LED is on, but is continuously blinking, the modem cannot synchronize with your
ISP’s equipment.
If you have just installed the modem and the ADSL LED has never been solid on, check the
following:
4-2 Troubleshooting
v1.0, August 2006
41. DM111P ADSL2+ Ethernet Modem Reference Manual
• Disconnect all telephones on the line. If this solves the problem, reconnect the telephones one
at a time, being careful to use a microfilter on each telephone. If the microfilters are connected
correctly, you should be able to connect all your telephones.
• If disconnecting telephones does not result in a green Internet LED, there may be a problem
with your wiring. If the telephone company has tested the ADSL signal at your Network
Interface Device (NID), then you may have poor quality wiring in your house.
• Verify that you are connected to the correct telephone line. If you have more than one phone
line, be sure that you are connected to the line with the ADSL service. It may be necessary to
use a swapper if you ADSL signal is on pins 1 and 4 or the RJ-11 jack. The ADSL2+ Modem
uses pins 2 and 3.
• Log in to the modem interface, as described in “Opening the Web-Based Modem Management
Utility” on page 2-4, and select ADSL Settings from the Setup section of the main menu.
• Make sure your login name and account password are correct and the ADSL settings are set to
the values required by your ISP.
If the ADSL light was solid on but is now blinking, try switching off the modem, waiting 30
seconds, and then switching back on again to see if the modem recovers. If the problem persists,
try the following:
• Check with your ISP that your service is not being interrupted.
• If you have recently installed a telephone or other device that uses the telephone lines, make
sure that it is connected to the telephone line via a microfilter.
• Log in to the modem interface, as described in “Opening the Web-Based Modem Management
Utility” on page 2-4, note the modem and ADSL status, and run the ADSL Bit Error Test
(BER) and modem diagnostics, as described in Chapter 3, “Managing Your Modem”, and
contact your ISP’s technical support representative.
LAN or Internet Port LEDs Not On
If either the LAN LED or Internet LED does not light when the Ethernet connection is made,
check the following:
• Make sure that the Ethernet cable connections are secure at the modem and at the connected
router or computer.
• Make sure that power is turned on to the connected router or computer.
Troubleshooting 4-3
v1.0, August 2006
42. DM111P ADSL2+ Ethernet Modem Reference Manual
• If the LAN port is lit, but the Internet port is not, log in to the modem interface, as described in
“Opening the Web-Based Modem Management Utility” on page 2-4, note the modem status,
run the modem diagnostics, as described in Chapter 3, “Managing Your Modem”, and contact
your ISP’s technical support representative.
Troubleshooting the Web Management Interface
If you are unable to access the modem’s Web Management interface from your computer check the
following:
• Check the Ethernet connection between the computer and the router as described in the
previous section.
• If your computer is directly connected to the modem, make sure your computer’s IP address is
on the same subnet as the modem. If you are using the recommended addressing scheme, your
computer’s address should be in the range of 192.168.0.2 to 192.168.0.254. Follow the
instructions in “Preparing a Computer for Network Access:” in Appendix B to configure your
computer.
Note: If your computer’s IP address is shown as 169.254.x.x:
Recent versions of Windows and MacOS will generate and assign an IP
address if the computer cannot reach a DHCP server. These auto-generated
addresses are in the range of 169.254.x.x. If your IP address is in this range,
check the connection from the computer to the modem and reboot your
computer.
• If your modem is connected to your computer via a router, make sure the computer’s IP
address is on the same subnet as the router, and the router is on a different subnet from the
modem. The LAN IP addresses of the modem and router will normally be printed on a label on
the bottom or rear of the unit. For details about changing the modem’s IP address, see “Setting
Up Your Ethernet Connection” on page 2-8
• If your modem’s IP address was changed and you do not know the current IP address, clear the
router’s configuration to factory defaults. This will set the router’s IP address to 192.168.0.1.
This procedure is explained in “Using the Reset button” on page 4-7.
• Make sure your browser has Java, JavaScript, or ActiveX enabled. If you are using Internet
Explorer, click Refresh to be sure the Java applet is loaded.
• Try quitting the browser and launching it again.
4-4 Troubleshooting
v1.0, August 2006
43. DM111P ADSL2+ Ethernet Modem Reference Manual
• Make sure you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that CAPS LOCK is off when entering this
information.
If the modem does not save changes you have made in the Web Management Interface, check the
following:
• When entering configuration settings, be sure to click the APPLY button before moving to
another menu or tab, or your changes are lost.
• Click the Refresh or Reload button in the Web browser. The changes may have occurred, but
the Web browser may be caching the old configuration.
Troubleshooting the Internet Connection
If your computer is connected to your modem via a router, disconnect the router and directly
connect the computer to the modem. If you now have Internet access, use the docomentation that
came with the router to perform re-installation and troubleshooting.
If your modem is unable to access the internet, but your Internet LED is green or blinking green,
you should determine whether the modem is able to obtain an IP address from the ISP. Unless you
have been assigned a static IP address, your modem must request an IP address from the ISP. You
can determine whether the request was successful using the browser interface.
To check the WAN IP address from the browser interface:
1. Launch your browser and select an external site such as www.netgear.com.
2. Access the management interface of the modem using your browser. For details, see “Opening
the Web-Based Modem Management Utility” on page 2-4.
3. Under the Maintenance heading select Modem Status. Check that an IP address is shown for
the ADSL port. If 0.0.0.0 is shown, your modem has not obtained an IP address from your ISP.
If your modem is unable to obtain an IP address from the ISP, check your
• Your ISP may require a Multiplexing Method or Virtual Path Identifier/Virtual Channel
Identifier parameter.
Verify with your ISP the Multiplexing Method and parameter value, and update the router’s
ADSL Settings accordingly.
• If your ISP requires PPP over Ethernet (PPPoE) or PPP over ATM (PPPOA), check that your
login credentials are correct.
Troubleshooting 4-5
v1.0, August 2006
44. DM111P ADSL2+ Ethernet Modem Reference Manual
• Log in to the modem management interface, as described in “Opening the Web-Based Modem
Management Utility” on page 2-4, note the modem status, run the modem diagnostics, as
described in Chapter 3, “Managing Your Modem”, and contact your ISP’s technical support
representative.
4-6 Troubleshooting
v1.0, August 2006
45. DM111P ADSL2+ Ethernet Modem Reference Manual
Troubleshooting Internet Browsing
If your modem can obtain an IP address but your computer is unable to load any Web pages from
the Internet:
• Your computer may not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www addresses)
to numeric IP addresses. Typically your ISP will provide the addresses of one or two DNS
servers for your use. If you entered a DNS address during the modem’s configuration, reboot
your computer and verify the DNS address as described in “Preparing a Computer for
Network Access:” in Appendix B. Alternatively, you can configure your computer manually
with DNS addresses, as explained in your operating system documentation.
• Your computer may not have the modem configured as its TCP/IP modem.
If your computer obtains its information from the modem by DHCP, reboot the computer and
verify the modem address as described in “Preparing a Computer for Network Access:” in
Appendix B.
Restoring the Default Configuration and Password
This section explains how to restore the factory default configuration settings, changing the
modem’s administration password to password and the IP address to 192.168.0.1. You can erase
the current configuration and restore factory defaults in two ways:
• Use the Erase function of the Web Configuration Manager (see “Backing Up, Restoring, or
Erasing Your Settings” on page 3-2).
• Use the Default Reset button on the rear panel of the router. Use this method for cases when
the administration password or IP address is not known.
Using the Reset button
To restore the factory default configuration settings without knowing the administration password
or IP address, you must use the Default Reset button on the rear panel of the router.
1. Press and hold the default reset button until the Power LED turns red (about 10 seconds).
2. Release the Default Reset button and wait for the router to reboot.
Troubleshooting 4-7
v1.0, August 2006
47. Appendix A
Technical Specifications
This appendix provides technical specifications for the DM111P ADSL2+ Ethernet Modem.
Network Protocol and Standards Compatibility
Data and Routing Protocols: TCP/IP, DHCP, PPP over Ethernet (PPPoE) or PPP over ATM
(PPPoA), RFC 1483 Bridged or Routed Ethernet, and RFC 1577
Classical IP over ATM
Power Adapter
North America: 120V, 60 Hz, input
United Kingdom, Australia: 240V, 50 Hz, input
Europe: 230V, 50 Hz, input
Japan: 100V, 50/60 Hz, input
All regions (output): 12 V AC @ 1.0A output
Physical Specifications
Dimensions: 6.9" x 4.7" x 1.1"
175 mm x 119 mm x 28 mm
Weight: 0.7 lbs.
0.3 kg
Environmental Specifications
Operating temperature: 0° to 40° C (32º to 104º F)
Operating humidity: 90% maximum relative humidity, noncondensing
Electromagnetic Emissions
Meets requirements of: FCC Part 15 Class B
VCCI Class B
EN 55 022 (CISPR 22), Class B
Interface Specifications
LAN: 10BASE-T or 100BASE-Tx, RJ-45
WAN: ADSL, ADSL2+, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
ITU Annex A or B (Annex B unit is DM111PB)
Technical Specifications A-1
v1.0, August 2006
49. Appendix B
Related Documents
This appendix provides links to reference documents you can use to gain a more complete
understanding of the technologies used in your NETGEAR product.
Document Link
Internet Networking and TCP/IP http://documentation.netgear.com/reference/enu/tcpip/index.htm
Addressing:
Preparing a Computer for http://documentation.netgear.com/reference/enu/wsdhcp/index.htm
Network Access:
Glossary: http://documentation.netgear.com/reference/enu/glossary/index.htm
Related Documents B-1
v1.0, August 2006