Mini VSR 12V 50A Mini Voltage Sensitive Relay Module
•
0 likes•381 views
The document discusses a voltage sensitive relay (VSR) that automatically connects an auxiliary battery to a starter battery when the starter battery is charged by the vehicle's alternator. The VSR disconnects the batteries when the starter battery voltage drops to prevent draining the starter battery. It operates by sensing when the starter battery voltage reaches 13.2 volts and connects the batteries, and disconnects them when the voltage drops below 12.8 volts. Instructions are provided on installing the VSR between the batteries.
Report
Share
Report
Share
Download to read offline
Recommended
Dual sensitive isolator r12140 a-r12140b
This document provides specifications and installation instructions for an Aopec battery isolator meant for dual battery systems in 12V or 24V applications. The isolator automatically connects or disconnects the main and auxiliary batteries based on the main battery voltage to allow charging while preventing draining. It has a continuous current rating of 140A or 100A and features surge protection. Proper cable sizing and connections are emphasized for safe installation between the batteries.
Dual Battery Example Connection
This document describes a dual battery system for a vehicle that uses a 200 amp continuous solenoid and a 1/2/Both 300 amp marine switch. The system is triggered by the alternator good circuit but can be disabled from inside the vehicle. When the marine switch is turned to the 1, 2, or both positions, power is supplied to the output and the 200 amp solenoid is removed from the circuit. This output is typically connected to a winch.
BEP Digital Voltage Sensitive Relay User Manual
The document describes a dual voltage sensitive relay (DVSR) that automatically charges a secondary battery bank from a single charging source and protects against deeply discharged batteries. The DVSR senses voltage levels and connects or disconnects the two battery banks, can operate in 12V or 24V systems, has low power consumption, high current capacity, and optional modes for remote monitoring or ignition-controlled operation.
BATTEK Voltage Sensitive Relay Module Datasheet
VSR units are ideal for dual battery set-ups as they enable two batteries to be charged at the same time and then isolates the batteries from each other when the vehicle is turned off, ensuring your starting battery is always charged & ready to go.
Single Sense: VSR units can only turn ON / OFF according to the Main Battery Voltage. VSR units turn ON (close circuit) when Main Battery Voltage is
greater than 13.3V.
Dual Sense: VSR units can turn ON / OFF according to both Main Battery and Auxiliary Battery Voltages. VSR units turn ON (close circuit) when EITHER Main Battery Voltage OR Auxiliary Battery Voltage is
greater than 13.3V.
Starting the engine with jumper cable
This document provides instructions for jump starting machines with electric starters that have either failed to start or have a low battery. The instructions outline 16 steps for safely connecting jumper cables between a stalled machine and a power source, starting the power source to provide charge to the stalled machine's batteries, attempting to start the stalled engine, and properly disconnecting the cables. Key safety points include never shorting the starter terminals, ensuring proper polarity in connecting the cables, and avoiding sparks near batteries to prevent explosion.
Ironman 4x4 140Amp Dual Battery Kit 12-24 Volt
1. The document provides a user guide for installing a 140-amp dual battery kit for vehicles with 12-24 volt systems. It describes connecting a second auxiliary battery to be automatically managed by an Ironman management system (IMS).
2. The IMS allows the two batteries to charge as one but can also isolate them, prioritizing the main battery charge to ensure it can start the vehicle.
3. Instructions are provided for mounting the IMS and connecting the batteries, volt meter, and wiring following a provided diagram. Fault finding tips are also included.
Presentation on starter
This document discusses different types of starters used for three phase induction motors. It describes stator resistance, auto transformer, star-delta, rotor resistance, direct online (DOL), and soft starters. Stator resistance and auto transformer starters limit starting current by adding resistance or reducing voltage. Star-delta starters initially connect the motor in star configuration and then switch to delta. Rotor resistance starters add external resistance to the rotor circuit. DOL starters connect the motor directly to full supply voltage. Soft starters use SCRs to gradually increase voltage during starting.
Rotor earth fault protection of electric generator
As the field is operated ungrounded, a single fault does not cause any flow of current or affect the operation of the electric generator. However, a single rotor earth fault increases the stress to the ground in the field
Recommended
Dual sensitive isolator r12140 a-r12140b
This document provides specifications and installation instructions for an Aopec battery isolator meant for dual battery systems in 12V or 24V applications. The isolator automatically connects or disconnects the main and auxiliary batteries based on the main battery voltage to allow charging while preventing draining. It has a continuous current rating of 140A or 100A and features surge protection. Proper cable sizing and connections are emphasized for safe installation between the batteries.
Dual Battery Example Connection
This document describes a dual battery system for a vehicle that uses a 200 amp continuous solenoid and a 1/2/Both 300 amp marine switch. The system is triggered by the alternator good circuit but can be disabled from inside the vehicle. When the marine switch is turned to the 1, 2, or both positions, power is supplied to the output and the 200 amp solenoid is removed from the circuit. This output is typically connected to a winch.
BEP Digital Voltage Sensitive Relay User Manual
The document describes a dual voltage sensitive relay (DVSR) that automatically charges a secondary battery bank from a single charging source and protects against deeply discharged batteries. The DVSR senses voltage levels and connects or disconnects the two battery banks, can operate in 12V or 24V systems, has low power consumption, high current capacity, and optional modes for remote monitoring or ignition-controlled operation.
BATTEK Voltage Sensitive Relay Module Datasheet
VSR units are ideal for dual battery set-ups as they enable two batteries to be charged at the same time and then isolates the batteries from each other when the vehicle is turned off, ensuring your starting battery is always charged & ready to go.
Single Sense: VSR units can only turn ON / OFF according to the Main Battery Voltage. VSR units turn ON (close circuit) when Main Battery Voltage is
greater than 13.3V.
Dual Sense: VSR units can turn ON / OFF according to both Main Battery and Auxiliary Battery Voltages. VSR units turn ON (close circuit) when EITHER Main Battery Voltage OR Auxiliary Battery Voltage is
greater than 13.3V.
Starting the engine with jumper cable
This document provides instructions for jump starting machines with electric starters that have either failed to start or have a low battery. The instructions outline 16 steps for safely connecting jumper cables between a stalled machine and a power source, starting the power source to provide charge to the stalled machine's batteries, attempting to start the stalled engine, and properly disconnecting the cables. Key safety points include never shorting the starter terminals, ensuring proper polarity in connecting the cables, and avoiding sparks near batteries to prevent explosion.
Ironman 4x4 140Amp Dual Battery Kit 12-24 Volt
1. The document provides a user guide for installing a 140-amp dual battery kit for vehicles with 12-24 volt systems. It describes connecting a second auxiliary battery to be automatically managed by an Ironman management system (IMS).
2. The IMS allows the two batteries to charge as one but can also isolate them, prioritizing the main battery charge to ensure it can start the vehicle.
3. Instructions are provided for mounting the IMS and connecting the batteries, volt meter, and wiring following a provided diagram. Fault finding tips are also included.
Presentation on starter
This document discusses different types of starters used for three phase induction motors. It describes stator resistance, auto transformer, star-delta, rotor resistance, direct online (DOL), and soft starters. Stator resistance and auto transformer starters limit starting current by adding resistance or reducing voltage. Star-delta starters initially connect the motor in star configuration and then switch to delta. Rotor resistance starters add external resistance to the rotor circuit. DOL starters connect the motor directly to full supply voltage. Soft starters use SCRs to gradually increase voltage during starting.
Rotor earth fault protection of electric generator
As the field is operated ungrounded, a single fault does not cause any flow of current or affect the operation of the electric generator. However, a single rotor earth fault increases the stress to the ground in the field
Strategic technology reserve Presentation
A powerpoint presention detailing the capabilities of the State of Oregon Strategic Technology Reserve trailers.
For info, email fred.molesworth@state.or.us
Charging System Automobile
The document discusses the function and testing of automotive charging systems. It explains that the charging system provides power to electrical loads and recharges the battery. It describes the components of the alternator including the rotor, stator, slip rings, brushes, and diodes. It discusses how to test for overcharging and undercharging conditions and the causes such as defective regulators, wiring issues, or mechanical problems. Proper voltage is between 13.8-14.8 volts or 27.4-28.4 volts depending on the system. Scope patterns can identify issues with diodes or regulators.
induction motor protection system
Three-phase induction motors are commonly used in industry. They have a stationary stator and a rotating rotor. Induction motors need protection from single phasing where one phase is lost, and overheating. The project aims to protect motors by shutting them off if single phasing or excessive temperature is detected. It uses transformers connected to each phase, relays, and a thermistor to sense temperature. If a phase is lost or temperature too high, the corresponding relay or thermistor will shut off power to the motor.
Induction Motor Protection System
This Ppt exlains how protect an induction motor from single phasing and over temperature. It also provides a protection system is very important in industries, using lot of motors such that production is not hampered owing to failure of any motor.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
http://www.edgefxkits.com/
Visit our page to get more ideas on popular electronic projects developed by professionals.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Lucthur
Star delta starting involves connecting an induction motor in star configuration during startup for lower starting current, then switching to delta configuration once the motor reaches near normal running speed for higher torque. This allows the motor to start smoothly without drawing excessive current. The motor is connected to star using contactor K1 during startup, then switched to delta using contactor K4 once it reaches 80% of full synchronous speed.
Electric motor-controls-tutorial
1) The document discusses various types of electric motor controls including starting methods, protection devices, and operational controls. It focuses on starting methods such as across the line starting and reduced voltage starting. 2) Motor protection categories include overcurrent protection, overload protection, and other protections like low voltage, phase failure, and ground fault. Proper sizing of overcurrent devices is also covered. 3) Different types of motor starters and controllers are examined, including manual and magnetic starters as well as reduced voltage starters like primary resistance and wye-delta starters.
Automatic Star Delta Starter Using Relays And Adjustable Electronic Timer For...
Automatic Star Delta Starter Using Relays And Adjustable Electronic Timer For...Edgefxkits & Solutions
The document describes an automatic star-delta starter circuit for induction motors using relays and an adjustable electronic timer. The circuit starts the motor in star configuration using three transformers, rectifiers and a 555 timer circuit to control four relays. After a preset time, the fourth relay switches the motor to delta configuration. It provides basic protection from voltage fluctuations and single phasing faults. The starter reduces starting current compared to direct online starting and is a low-cost solution, though it can be improved further with soft start capabilities.Basic electrical engineering_alternators
working principle of alternators and its kind _What you've just experienced is an example of an alternator breathing its last breath.
Your first thought might have been the battery is dying. In a sense, you would be right because the battery and the alternator are related, but the battery tends to get all the press.
This presentation aims to explain the mechanics of alternators, how you can diagnose problems and what you can do if you have a bad alternator.
You will come to now to some background information about alternators and the war of the currents.
Project PPT
This document describes the design of an automatic star-delta starter for an induction motor using relays and an adjustable electronic timer. The starter is designed to reduce starting current and prevent issues from low voltage, single phasing, over voltage and under voltage. The circuit uses a 555 timer, transistors, diodes, resistors, capacitors, relays and transformers. It operates by starting the motor in a low-current star configuration, then switching to a delta configuration after a set time using relays controlled by the 555 timer. This provides smooth starting of the induction motor.
New Microsoft Word Document
This document is a report on protecting an alternator from various faults. It discusses faults like unbalanced loading, stator winding faults, inter-turn faults, and protection methods like differential protection and its modifications. It also covers protection from earth faults, overspeed, overcurrent, overvoltage, failure of the field and prime mover. Diagrams are included to explain the protection principles and connections. The report provides a comprehensive overview of alternator faults and protection techniques.
Diwan Annexure Starter panels Presentation Rev-1 Dt16-11-2014
The document discusses Variable Frequency Drives (VFDs) used to control AC motor speed and torque by varying input frequency and voltage. It provides details on:
- The basic principle of how VFDs operate by converting AC to DC and then back to AC at a variable frequency.
- Features of ABB HVAC drives including EMC filters, embedded fieldbus protocols, PID control, timers and an interactive control panel.
- Technical specifications, installation instructions and mounting of ABB ACH550 HVAC variable frequency drives.
Cg vsr solar-drive-catalogue.pdf english(1)
We “Adharsh Engineer” are involved as the Manufacturer, wholesaler, Trader and Service Provider of Control Panel Board, APFC Panel, PID Controller, Variable Frequency Drive and Electrical Panel Box and much more. These products are offered by us at most affordable rates.
Littlefuse Smart Battery Isolator
The smart battery isolator connects two vehicle batteries together during charging and isolates them when not charging to prevent parasitic drain. It can also connect the batteries on demand using a momentary switch to provide extra starting power. It is rated for continuous current of 200A/85A and has studs and wire connections to install between the main and auxiliary batteries along with an LED status indicator.
Protection of alternator
This document discusses various protection schemes for alternators, including differential protection, differential protection for alternators with high resistance grounding, negative phase sequence protection, balanced earth fault protection, and overcurrent protection. It describes how each protection scheme detects faults or unbalanced loading conditions in the alternator. Differential protection compares currents on each side of the alternator winding and trips if they are unequal due to an internal fault. Other schemes like negative phase sequence and earth fault protection are used to detect unbalanced or ground faults that may not be caught by differential protection.
Major faults in an alternator and their protection.
This document discusses various types of faults that can occur in alternators, including internal faults like stator winding faults and excitation circuit faults, and external faults like prime mover failure. It provides details on specific faults such as stator winding faults, prime mover failure, overcurrent faults, overvoltage faults, unbalanced loading, stator interturn faults, loss of synchronism, and over/under frequency faults. Protection methods are discussed for each fault type, such as differential protection for stator faults, reverse power protection for prime mover failure, time-delayed overcurrent protection, and frequency-based protection for over/under frequency operation.
Third Lesson Induction Motor
The document discusses performing a no-load test on a three-phase induction motor. A no-load test is done to determine the motor's no-load losses, which include iron losses from the core and mechanical losses. The test involves measuring voltage, current, power, speed and power factor at the motor terminals while the rotor is uncoupled from any load. Power is measured using two wattmeters to also obtain the power factor.
MOTOR STARTER
This document discusses different types of motor starters used for induction motors. It describes stator resistance, auto transformer, star-delta, rotor resistance, direct online (DOL), and variable frequency drive (VFD) starters. Each type is explained in terms of its operating principle. Their advantages and disadvantages are also summarized. The document aims to educate about motor starters and the techniques used to safely start induction motors.
Control of ac motors
A motor starter is a device designed to:
Start a motor
Accelerate the motor rated speed in the shortest time
Provide protection from overload conditions
A motor starter is therefore a switch with an overload relay.
A motor controller is a device designed to control the operation of a motor. As such it can be
used to control things such as:
Control when the motor starts and stops
How long it runs for
How often the motor run in a given period
Direction of rotation
ALSTOM RELAY ANIMAT
The document discusses various acronyms and company names related to electrical equipment, including MVAX, MVAJ, Alstom/Areva, and SWATECH ELECTRICA. It also mentions relays and the acronym MVTU.
Smart Battery Isolator 12V 100A Technical Specification
The Smart Battery Isolator is designed for dual battery systems to protect the primary starting battery from excessive load while allowing auxiliary batteries to charge. It senses input voltage and automatically connects or disconnects loads at preset voltages of 13.4V and 12.8V to prevent discharging the starting battery. With a surge current rating of 200A and continuous rating of 100A, it is well-suited for dual battery setups in vehicles.
2012 HELIOS Pressure Shower Manual
This document provides information about the NEMO Helio Pressure Shower product. It includes details about the product such as its 11 liter capacity, 7 foot hose, foot pump to regulate pressure, and that it packs into a small carrying case. Instructions are provided for use, which involve adding water, pressurizing the tank by pumping, and spraying water while occasionally pumping. The document also provides a warranty against defects in workmanship and materials to the original owner with proof of purchase.
Fuse Relay Box with Connector for Power Distribution
LEONI is an experienced partner that develops and supplies wiring systems and components for automotive and commercial vehicles. They ensure tailored product solutions that combine a wide range of fuse and relay boxes with application-specific plug-in components, guaranteeing an optimal interface between the box and harness. LEONI offers customers individual solutions according to their requirements from a single source.
More Related Content
What's hot
Strategic technology reserve Presentation
A powerpoint presention detailing the capabilities of the State of Oregon Strategic Technology Reserve trailers.
For info, email fred.molesworth@state.or.us
Charging System Automobile
The document discusses the function and testing of automotive charging systems. It explains that the charging system provides power to electrical loads and recharges the battery. It describes the components of the alternator including the rotor, stator, slip rings, brushes, and diodes. It discusses how to test for overcharging and undercharging conditions and the causes such as defective regulators, wiring issues, or mechanical problems. Proper voltage is between 13.8-14.8 volts or 27.4-28.4 volts depending on the system. Scope patterns can identify issues with diodes or regulators.
induction motor protection system
Three-phase induction motors are commonly used in industry. They have a stationary stator and a rotating rotor. Induction motors need protection from single phasing where one phase is lost, and overheating. The project aims to protect motors by shutting them off if single phasing or excessive temperature is detected. It uses transformers connected to each phase, relays, and a thermistor to sense temperature. If a phase is lost or temperature too high, the corresponding relay or thermistor will shut off power to the motor.
Induction Motor Protection System
This Ppt exlains how protect an induction motor from single phasing and over temperature. It also provides a protection system is very important in industries, using lot of motors such that production is not hampered owing to failure of any motor.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
http://www.edgefxkits.com/
Visit our page to get more ideas on popular electronic projects developed by professionals.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Lucthur
Star delta starting involves connecting an induction motor in star configuration during startup for lower starting current, then switching to delta configuration once the motor reaches near normal running speed for higher torque. This allows the motor to start smoothly without drawing excessive current. The motor is connected to star using contactor K1 during startup, then switched to delta using contactor K4 once it reaches 80% of full synchronous speed.
Electric motor-controls-tutorial
1) The document discusses various types of electric motor controls including starting methods, protection devices, and operational controls. It focuses on starting methods such as across the line starting and reduced voltage starting. 2) Motor protection categories include overcurrent protection, overload protection, and other protections like low voltage, phase failure, and ground fault. Proper sizing of overcurrent devices is also covered. 3) Different types of motor starters and controllers are examined, including manual and magnetic starters as well as reduced voltage starters like primary resistance and wye-delta starters.
Automatic Star Delta Starter Using Relays And Adjustable Electronic Timer For...
Automatic Star Delta Starter Using Relays And Adjustable Electronic Timer For...Edgefxkits & Solutions
The document describes an automatic star-delta starter circuit for induction motors using relays and an adjustable electronic timer. The circuit starts the motor in star configuration using three transformers, rectifiers and a 555 timer circuit to control four relays. After a preset time, the fourth relay switches the motor to delta configuration. It provides basic protection from voltage fluctuations and single phasing faults. The starter reduces starting current compared to direct online starting and is a low-cost solution, though it can be improved further with soft start capabilities.Basic electrical engineering_alternators
working principle of alternators and its kind _What you've just experienced is an example of an alternator breathing its last breath.
Your first thought might have been the battery is dying. In a sense, you would be right because the battery and the alternator are related, but the battery tends to get all the press.
This presentation aims to explain the mechanics of alternators, how you can diagnose problems and what you can do if you have a bad alternator.
You will come to now to some background information about alternators and the war of the currents.
Project PPT
This document describes the design of an automatic star-delta starter for an induction motor using relays and an adjustable electronic timer. The starter is designed to reduce starting current and prevent issues from low voltage, single phasing, over voltage and under voltage. The circuit uses a 555 timer, transistors, diodes, resistors, capacitors, relays and transformers. It operates by starting the motor in a low-current star configuration, then switching to a delta configuration after a set time using relays controlled by the 555 timer. This provides smooth starting of the induction motor.
New Microsoft Word Document
This document is a report on protecting an alternator from various faults. It discusses faults like unbalanced loading, stator winding faults, inter-turn faults, and protection methods like differential protection and its modifications. It also covers protection from earth faults, overspeed, overcurrent, overvoltage, failure of the field and prime mover. Diagrams are included to explain the protection principles and connections. The report provides a comprehensive overview of alternator faults and protection techniques.
Diwan Annexure Starter panels Presentation Rev-1 Dt16-11-2014
The document discusses Variable Frequency Drives (VFDs) used to control AC motor speed and torque by varying input frequency and voltage. It provides details on:
- The basic principle of how VFDs operate by converting AC to DC and then back to AC at a variable frequency.
- Features of ABB HVAC drives including EMC filters, embedded fieldbus protocols, PID control, timers and an interactive control panel.
- Technical specifications, installation instructions and mounting of ABB ACH550 HVAC variable frequency drives.
Cg vsr solar-drive-catalogue.pdf english(1)
We “Adharsh Engineer” are involved as the Manufacturer, wholesaler, Trader and Service Provider of Control Panel Board, APFC Panel, PID Controller, Variable Frequency Drive and Electrical Panel Box and much more. These products are offered by us at most affordable rates.
Littlefuse Smart Battery Isolator
The smart battery isolator connects two vehicle batteries together during charging and isolates them when not charging to prevent parasitic drain. It can also connect the batteries on demand using a momentary switch to provide extra starting power. It is rated for continuous current of 200A/85A and has studs and wire connections to install between the main and auxiliary batteries along with an LED status indicator.
Protection of alternator
This document discusses various protection schemes for alternators, including differential protection, differential protection for alternators with high resistance grounding, negative phase sequence protection, balanced earth fault protection, and overcurrent protection. It describes how each protection scheme detects faults or unbalanced loading conditions in the alternator. Differential protection compares currents on each side of the alternator winding and trips if they are unequal due to an internal fault. Other schemes like negative phase sequence and earth fault protection are used to detect unbalanced or ground faults that may not be caught by differential protection.
Major faults in an alternator and their protection.
This document discusses various types of faults that can occur in alternators, including internal faults like stator winding faults and excitation circuit faults, and external faults like prime mover failure. It provides details on specific faults such as stator winding faults, prime mover failure, overcurrent faults, overvoltage faults, unbalanced loading, stator interturn faults, loss of synchronism, and over/under frequency faults. Protection methods are discussed for each fault type, such as differential protection for stator faults, reverse power protection for prime mover failure, time-delayed overcurrent protection, and frequency-based protection for over/under frequency operation.
Third Lesson Induction Motor
The document discusses performing a no-load test on a three-phase induction motor. A no-load test is done to determine the motor's no-load losses, which include iron losses from the core and mechanical losses. The test involves measuring voltage, current, power, speed and power factor at the motor terminals while the rotor is uncoupled from any load. Power is measured using two wattmeters to also obtain the power factor.
MOTOR STARTER
This document discusses different types of motor starters used for induction motors. It describes stator resistance, auto transformer, star-delta, rotor resistance, direct online (DOL), and variable frequency drive (VFD) starters. Each type is explained in terms of its operating principle. Their advantages and disadvantages are also summarized. The document aims to educate about motor starters and the techniques used to safely start induction motors.
Control of ac motors
A motor starter is a device designed to:
Start a motor
Accelerate the motor rated speed in the shortest time
Provide protection from overload conditions
A motor starter is therefore a switch with an overload relay.
A motor controller is a device designed to control the operation of a motor. As such it can be
used to control things such as:
Control when the motor starts and stops
How long it runs for
How often the motor run in a given period
Direction of rotation
ALSTOM RELAY ANIMAT
The document discusses various acronyms and company names related to electrical equipment, including MVAX, MVAJ, Alstom/Areva, and SWATECH ELECTRICA. It also mentions relays and the acronym MVTU.
What's hot (19)
Automatic Star Delta Starter Using Relays And Adjustable Electronic Timer For...
Automatic Star Delta Starter Using Relays And Adjustable Electronic Timer For...
Diwan Annexure Starter panels Presentation Rev-1 Dt16-11-2014
Diwan Annexure Starter panels Presentation Rev-1 Dt16-11-2014
Major faults in an alternator and their protection.
Major faults in an alternator and their protection.
Viewers also liked
Smart Battery Isolator 12V 100A Technical Specification
The Smart Battery Isolator is designed for dual battery systems to protect the primary starting battery from excessive load while allowing auxiliary batteries to charge. It senses input voltage and automatically connects or disconnects loads at preset voltages of 13.4V and 12.8V to prevent discharging the starting battery. With a surge current rating of 200A and continuous rating of 100A, it is well-suited for dual battery setups in vehicles.
2012 HELIOS Pressure Shower Manual
This document provides information about the NEMO Helio Pressure Shower product. It includes details about the product such as its 11 liter capacity, 7 foot hose, foot pump to regulate pressure, and that it packs into a small carrying case. Instructions are provided for use, which involve adding water, pressurizing the tank by pumping, and spraying water while occasionally pumping. The document also provides a warranty against defects in workmanship and materials to the original owner with proof of purchase.
Fuse Relay Box with Connector for Power Distribution
LEONI is an experienced partner that develops and supplies wiring systems and components for automotive and commercial vehicles. They ensure tailored product solutions that combine a wide range of fuse and relay boxes with application-specific plug-in components, guaranteeing an optimal interface between the box and harness. LEONI offers customers individual solutions according to their requirements from a single source.
BATTEK Voltage Senstivie Relay 12V 140A Single Dual Sense Dimension Drawing
This document provides technical specifications and diagrams for two voltage sensitive relay models, the VSR-SS-12V-140A and VSR-DS-12V-140A. The diagrams show the dimensions and features of the relays, including their sizes, cable openings, and component dimensions in millimeters. The document also lists the company website, version number, scale, and date.
BEP Marine Catalog
The document discusses electrical solutions from six leading marine and mobile electrical companies that are now working together to offer broader solutions. It summarizes various digital switching, battery management, connector, circuit protection, power distribution, and meter products available from the combined companies for applications in marine, emergency, industrial, and RV environments.
Hella 2014 Product Overview Caravans and Motorhomes
This document provides an overview of lighting and electronic products from Hella for caravans and motorhomes. It discusses Hella's offerings for front, side, rear, and interior lighting as well as electronic components. The company aims to provide high quality, innovative, and sustainable lighting solutions that improve safety and efficiency while meeting industry standards.
Ionnic Switching Systems
The document discusses several technologies for remote control and safety applications:
(1) RF remote control uses radio frequencies to transmit data without wires over long distances and through structures.
(2) The iROS rollover sensor uses an accelerometer to accurately detect if a vehicle has rolled over before shutting down electrical systems, as required by regulations.
(3) The programmable switch panel allows remote control of multiple functions through an LCD interface and CAN bus communication between devices.
KYMCO Accessories Catalog 4WD 2015
This document lists various Mongoose and MXU ATV models, UXV side-by-side models, and accessories for these vehicles from KYMCO. It provides details on over 50 accessories including shock covers, wheels, skid plates, guards, nerf bars, winches, plow components, tops, doors and more. The accessories range in price from around $65 to over $2,900 and fit various KYMCO ATV and UTV models from 70CC to 700CC.
WAECO Professional Cooling Catalog 2014
The document provides information on thermoelectric coolers from Dometic WAECO for temperature-controlled transport applications. It summarizes their TropiCool series, which includes four models ranging in size from 7 to 33 liters. The three larger models have a 12/24V DC and 230V AC power supply as standard and can accurately control temperature from 1-15°C or heat from 50-65°C. They are well insulated and have efficient, maintenance-free cooling capabilities for applications like food, specimen, and sample transportation.
Viewers also liked (9)
Smart Battery Isolator 12V 100A Technical Specification
Smart Battery Isolator 12V 100A Technical Specification
Fuse Relay Box with Connector for Power Distribution
Fuse Relay Box with Connector for Power Distribution
BATTEK Voltage Senstivie Relay 12V 140A Single Dual Sense Dimension Drawing
BATTEK Voltage Senstivie Relay 12V 140A Single Dual Sense Dimension Drawing
Hella 2014 Product Overview Caravans and Motorhomes
Hella 2014 Product Overview Caravans and Motorhomes
Similar to Mini VSR 12V 50A Mini Voltage Sensitive Relay Module
Charge controller
in this presentation charge controller is discussed
with good examples of taking load perfectly explanantion
of the controller according to load MPPT
PWM technique is also explained inthis presentation
power calculations also done for better explanation
Voltage Sensitive Relay ATV UTV Smart Battery Isolator 12V Specification
The BATTEK Battery Management System uses voltage sensitive relays (VSRs) to manage power between a vehicle's main and auxiliary batteries. The VSRs automatically connect the batteries when the main battery is charging and isolate them when the vehicle is off, preventing the auxiliary battery from draining the main battery. The VSRs are weatherproof, have surge protection, and LED indicators. They are well-suited for dual battery systems in ATVs, UTVs, and other vehicles with 12V charging.
Agn102 b
This document provides information about Markon alternators, specifically the BL105 and SL105 models. It describes the basic excitation systems used in these small alternators, which rely on capacitor or slip ring excitation to induce voltage in the rotor. It also discusses considerations for operating these alternators, such as acceptable voltage regulation, testing procedures, and suitability for different load types like motors which can be sensitive to harmonic distortion in the output voltage. Repair instructions are provided for common components like the main rotor diode and varistor.
Effective Way to Test the Battery of your Car
The battery is the main source of power in the car and supplies the current to all the electric components. So, always test the condition of the battery like the charge, output voltage and the level of fluid in it. In this slideshow, you can get the effective ways to test the battery of your car.
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
The document is a service manual that provides instructions for servicing components of a dumper vehicle, including the starter motor. It begins with general health and safety warnings about working on the machine. The starter motor section then provides an introduction to how starter motors function, identifies the main components of the starter motor, and provides instructions for checking the condition of the starter motor using a multimeter. It lists acceptable voltage readings at different test points with the ignition switch in the start position.
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
The document provides service and repair instructions for a dumper vehicle, outlining safety procedures and detailing maintenance and repair of various systems including the engine, brakes, hydraulics, electrical systems, and other components. Sections cover removal and installation of parts, inspections, specifications, and consumable products. Copyright information is included and the manual advises keeping it in good condition as part of the machine.
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
The document provides service and repair instructions for a dumper vehicle, including sections on the machine components, engine, fuel and exhaust systems, cooling system, brakes, steering, driveline, hydraulics, and electrical systems. Safety warnings are included throughout advising technicians to make the machine safe before working on it and proper procedures for removing and installing components. Copyright information is also provided noting that reproduction of the manual requires permission from the manufacturer.
Jcb 1 tht dumper service repair manual
The document provides service and repair instructions for a dumper vehicle, including sections on the machine components, engine, fuel and exhaust systems, cooling system, brakes, steering, driveline, hydraulics, and electrical systems. Safety warnings are included throughout advising technicians to make the machine safe before working on it and proper procedures for removing and installing components. Copyright information is also provided noting that reproduction of the manual requires permission from the manufacturer.
Jcb 1 tht dumper service repair manual
The document provides service and repair instructions for a dumper vehicle, outlining safety procedures and detailing maintenance and repair of various systems including the engine, brakes, hydraulics, electrical systems, and other components. Sections cover removal and installation of parts, inspections, specifications, and consumable products. Copyright information is included and the manual advises keeping it in good condition as part of the machine.
Jcb 1 tht dumper service repair manual
The document provides service and repair instructions for a dumper vehicle, outlining safety procedures and detailing maintenance and repair of various systems including the engine, brakes, hydraulics, electrical systems, and other components. Sections cover removal and installation of parts, inspections, specifications, and consumable products. Copyright information is included and the manual advises keeping it in good condition as part of the machine.
Jcb 1 tht dumper service repair manual
The document is a service manual that provides instructions for servicing components of a dumper vehicle, including the starter motor. It begins with general health and safety warnings about working on the machine. The starter motor section then provides an introduction to how starter motors function, identifies the main components of the starter motor, and provides instructions for checking the condition of the starter motor using a multimeter. It lists acceptable voltage readings at different test points with the ignition switch in the start position.
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
The document is a service manual that provides instructions for servicing components of a dumper vehicle, including the starter motor. It begins with general health and safety warnings for working on the machine. The starter motor section then provides an introduction to how starter motors function, identifies the main components of the starter motor, and provides instructions for checking the condition of the starter motor using a multimeter. It lists acceptable voltage readings at different test points with the ignition switch in the start position.
Starter of an induction motor
An induction motor starter is necessary to control the starting current and torque of the motor. There are different types of starters that can be used depending on the size of the motor, including DOL, star-delta, primary resistance, and auto transformer starters. A soft starter uses electronics to gradually increase the voltage applied to the motor during starting and stopping, reducing mechanical and electrical stresses on the system.
Dc motor starters
This document discusses different types of starters for DC motors and induction motors. For DC motors, it describes 3-point, 4-point, and 2-point starters. The 3-point and 4-point starters connect the armature, field, and supply. The 4-point adds a no-voltage coil terminal. The 2-point starter uses series resistance to reduce starting current. For induction motors, it discusses DOL, primary resistance, star-delta, autotransformer, and rotor resistance starters. The star-delta and autotransformer starters apply reduced voltage on start up to limit current. The rotor resistance starter connects external resistors to the rotor on start up. Assignment questions are provided to draw and explain examples of
Probador de alternador
This document provides safety instructions and an operations manual for an alternator-starter tester. It details important safety precautions to follow when using the device, including wearing safety glasses and keeping loose clothing away from moving parts. It then provides specifications for the tester, describing its dimensions, weight, electrical requirements, and operational features. Control functions are defined, including switches for power, drive motor, and testing circuits. Assembly instructions conclude the document, advising caution when lifting components.
Atv 1000
This document provides wiring instructions for an aftermarket vehicle security system. It describes the function and installation of each wire, including the black ground wire, red constant power wire, yellow ignition wire, and wires for outputs such as starter interrupt, trunk release, siren, and parking lights. Instructions are given for connecting the wires to specific circuits in the vehicle and installing relays when needed. The document also covers programming and transmitter programming.
RENEWABLE ENERGY SYSTEMS
The document discusses various electrical backup and renewable energy systems, including inverters and batteries. It provides specifications for 3 load shedding options that include a modified sine wave inverter, deep cycle lead acid batteries, and an estimated run time for powering common devices during load shedding. The options are suited for powering TVs, sound systems and lights but not devices with motors or speed controls. Proper sizing and matching of inverters and batteries is recommended for maximum performance and battery life.
Hyster a476 (t5 z) forklift service repair manual
This document provides instructions for servicing the electric brake system on motorized hand trucks. It describes the different types of brakes used and outlines safety procedures for working on the brake system. Proper blocking of the truck is required before performing any repairs. The document explains how to release an engaged brake to move a truck if necessary for servicing. Procedures are provided for checking that the brake can properly hold the loaded truck on a grade and for discharging capacitors before working on electrical components to avoid shock.
Mech EE6365 EE lab_manual
This document provides information about different types of DC motor starters and AC motor starters. It discusses two point, three point, and four point starters for DC motors. It explains how each type protects the motor from high starting currents and overloads. It also covers various AC motor starting methods like auto transformer starting, star-delta starting, and direct online starting. Star-delta and auto transformer starting reduce the starting current by initially applying a lower voltage to the motor. Direct online starting applies full voltage but is only suitable for small motors due to the large starting currents involved.
What are the Causes of Clinking Noise in Car
One of the most important things for a car is its maintenance and servicing for smooth running and better performance. However, owners tend to be complacent when it comes to servicing and maintaining their car which eventually leads to issues. The abnormal sounds coming from the car like a clinking noise signifies that something is wrong with the car. Go through the slide to know the causes of clinking noise in your car.
Similar to Mini VSR 12V 50A Mini Voltage Sensitive Relay Module (20)
Voltage Sensitive Relay ATV UTV Smart Battery Isolator 12V Specification
Voltage Sensitive Relay ATV UTV Smart Battery Isolator 12V Specification
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
JCB 1THT Dumper Service Repair Manual Instant Download.pdf
More from Rimsky Cheng
AC Generator.ppt
This document provides an overview of key concepts in three-phase circuits. It discusses different three-phase configurations including wye, delta, and their combinations. Balanced and unbalanced three-phase systems are examined. The objectives are to understand how to analyze three-phase circuits, distinguish between balanced and unbalanced systems, apply concepts to power calculations and measurements, and simulate three-phase circuits in PSpice. Diagrams demonstrate voltage and current relationships in various three-phase connections.
Renk Transmissions for Military Tracked Vehicles
RENK designs and manufactures transmissions for military tracked vehicles. They provide over 50 years of experience developing transmissions that drive, steer, and brake tracked vehicles. RENK transmissions are used in a wide range of military vehicles from infantry fighting vehicles to main battle tanks, and are relied on by over 30 armies worldwide.
Dual Purpose Generator Set Maintenance Manual
The document provides instructions for the operation and maintenance of a Dual Purpose Mobile Check and Adjustment/Generator Stand used to functionally test Auxiliary Power Units. The stand has components for electrical connections and fuel supply to operate an APU for testing or to provide AC power. Maintenance instructions are included to ensure efficient operation of the stand and its use for checking APUs.
75mm tank gun M2 for medium tank M3 (Grant) Maintenance Manual
This document provides a 3-paragraph summary of a military manual describing the 75mm tank gun M2 mounted on medium tank M3s. It includes characteristics of the gun such as its flat trajectory, drop-type breechblock, and ability to fire 15-pound projectiles at rates up to 20 rounds per minute. It also describes the gun group including the tube, breech ring, breechblock, extractors, and firing mechanism. Finally, it provides general data on the gun and mount including weights, dimensions, ballistics, and maximum elevation and traverse capabilities.
Hella MUNICIPAL VEHICLES AND VEHICLES WITH SPECIAL BODYWORK Catalog
This document is a catalog for lighting and warning systems for municipal and special vehicles produced by Hella. It includes:
- Introductions and descriptions of various vehicle types they supply such as waste collection vehicles, road cleaning vehicles, and more.
- Detailed sections on beacons, optical warning systems, worklights, front lighting, side lighting, and rear lighting.
- Specifications and diagrams for different lighting product lines including LED, halogen, and xenon options.
- Information on approvals, thermal management, and comparisons of their lighting quality.
The document provides an overview of Hella's full offerings for vehicle lighting and warning systems with a focus on applications for municipal and
Capacitive Switch Relay Panel Datasheet
1. The document lists the features included with a capacitive relay switch panel, which include a touch screen panel, circuit control box, cable, labels, power cables, output wires, and screws.
2. The panel allows easy control of LED work lights and appliances on vehicles through capacitive touch and includes labels for common boat features.
3. It can handle voltages of 12V or 24V and has a maximum 10A current for each of its 6 output circuits, with overcurrent protection via resettable fuses.
TE Automotive Power Distribution
TE Connectivity is a leader in automotive connectivity and sensor technology. They provide innovative technologies that connect every electronic function in vehicles, from alternative power systems to infotainment and sensor technologies. Their products include electrical interconnection products, cable assemblies, hybrid and electric mobility solutions, sensor solutions, relays, and infotainment solutions. TE works with customers to develop switching and protection devices suitable for different applications across vehicle systems.
8w97 Power Distribution Maintenance Manual
The document describes the power distribution system for a vehicle. It includes the Totally Integrated Power Module (TIPM) which centralizes power distribution and protection. The TIPM contains fuses, relays and a microprocessor. It provides primary voltage distribution and protection. The document discusses TIPM description, operation, removal and installation procedures. It also describes the ignition-off draw fuse and cigar lighter outlet components.
Miunske CAN-BUS Product Catalog
The document discusses Miunske's CAN products including CAN keypads, software, modules, and gateways. CAN keypads are switch and display units for vehicles that provide robust construction, perfect night design through specialized lighting, and individual design possibilities. They allow for switching, display, and status indication functions. The document provides technical details and specifications of CAN keypads and options for customization.
Automotive Adaptive Front-lighting System Reference Design
This document describes a reference design for an automotive adaptive front-lighting system (AFS) that adjusts headlight angle and intensity based on factors like vehicle speed, steering, weather, and motion. The reference design aims to demonstrate an AFS solution using TI microcontrollers. It consists of an AFS controller that communicates over CAN and controls headlights via PWM, and an AFS slave that controls stepper motors to adjust headlight angle via LIN communication. The document provides details on the system architecture and functions of both the controller and slave boards, and guidelines for operating the demo system.
ТАНК Т-72А ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
ТАНК Т-72А ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Изделие 9П148 Инструкция По Эксплуатации
Изделие 9П148 Инструкция По Эксплуатации По-русский
BRDM-2 Variant 9P148 Product Instruction Manual
Infineon Smart Battery Switch Demonstrator
The document describes a smart battery switch demonstrator that uses electronic components rather than a traditional pyroelectric switch. It can handle currents up to 400 amps static and 1800 amps for starting. The demonstrator uses new TO-Leadless MOSFETs combined with a copper inlay PCB technology to achieve low resistances of 0.082mOhm and 0.112mOhm from the MOSFET and terminal to terminal respectively. Measurement results show voltage drops and temperature rises up to different current levels. The technology allows for more flexible control compared to traditional switches and can provide benefits like reduced corrosion.
SILICON LABS APPLICATION GUIDE 2013
Silicon Labs provides solutions for automotive body electronics applications, including anti-pinch window gate lifters, power seats, remote keyless entry, and HVAC systems. Their portfolio includes microcontrollers, capacitive touch sensors, infrared proximity sensors, and isolators to enable complex systems while meeting strict automotive standards for quality, reliability and power efficiency. Their products allow automakers to develop differentiated features while reducing costs through highly integrated solutions.
NXP Automotive ESD Protection Application Guide
This document provides guidelines for protecting commonly used interfaces from electrostatic discharge (ESD) and transient voltages. It discusses ESD protection considerations and solutions for automotive interfaces like CAN, LIN, and FlexRay. It also covers general input/output, serial buses, displays, Ethernet, and radio frequency interfaces. For each interface, example protection circuits are shown along with NXP's recommended protection devices that offer high ESD robustness and minimal impact on signal integrity.
GAZ69 Technical Maintenance Manual English
This document provides a summary of the specifications and design descriptions of the GAZ-69 and GAZ-69A cars. It describes the general data of the vehicles including dimensions, weight distribution, payload capacity, and performance characteristics. The document also outlines the technical details of the car's engine, chassis, transmission, electrical systems, suspension, tires, and other mechanical components. It provides the specifications to guide operators in maintaining and adjusting the vehicles.
Cm161 137 140 RV Profile Vista
The Vista RV Crossover is a compact off-road RV designed to go anywhere a 4WD can go while still providing the comforts of home. It has a unique independent suspension system that allows for 13 inches of wheel travel over rough terrain. The interior features a queen size bed that folds away, a dining area, fridge, and storage spaces. The Crossover is suitable for off-road adventures due to its durable construction and available optional upgrades like additional batteries and solar panels.
Guide to Best Suspension Design for Off Road Caravan
Suspension design is an important factor for off-road caravans and camper trailers. Soft coil springs or air-springs provide the best ride quality but require stability measures like anti-sway bars for highway use. Air-springs level the trailer regardless of load and allow smoother travel at higher speeds. While initially more expensive than coil springs, well-designed air-suspension systems have improved in reliability and allow easier replacement of components like air-bags. The document discusses suspension innovations in 4WD vehicles and lessons learned in developing reliable air-suspension for off-road caravans.
More from Rimsky Cheng (20)
75mm tank gun M2 for medium tank M3 (Grant) Maintenance Manual
75mm tank gun M2 for medium tank M3 (Grant) Maintenance Manual
Hella MUNICIPAL VEHICLES AND VEHICLES WITH SPECIAL BODYWORK Catalog
Hella MUNICIPAL VEHICLES AND VEHICLES WITH SPECIAL BODYWORK Catalog
Automotive Adaptive Front-lighting System Reference Design
Automotive Adaptive Front-lighting System Reference Design
ТАНК Т-72А ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
ТАНК Т-72А ТЕХНИЧЕСКОЕ ОПИСАНИЕ И ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ
Guide to Best Suspension Design for Off Road Caravan
Guide to Best Suspension Design for Off Road Caravan
Recently uploaded
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Hero Glamour Xtec Brochure | Hero MotoCorp
Buy the Hero Glamour Xtec 2023 to enhance your riding experience. See the new model’s bike price in India's uncover its aesthetics and features.
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
What Could Cause The Headlights On Your Porsche 911 To Stop Working
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing
Skoda Octavia Rs for Sale Perth | Skoda Perth
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【网址🎉ac123.net🎉】
欧洲杯比赛投注官网是独立的博彩公司。该公司最初专门从事在线体育博彩，现在合并了在线娱乐场。该公司最初成立时以其前董事长Victor Chandler的名字命名，之后更名为欧洲杯比赛投注官网。欧洲杯比赛投注官网现由商人和赛马主，迈克尔·塔博尔拥有，运营总部设在直布罗陀。平台拥有体育博彩（沙巴）、真人娱乐场、电子游戏、金融投注等游戏项目，支持手机投注，优惠活动很丰富。
一比一原版(OP毕业证)奥塔哥理工学院毕业证成绩单如何办理
OP毕业证【微信95270640】《如何办理奥塔哥理工学院毕业证认证》【办证Q微信95270640】《奥塔哥理工学院文凭毕业证制作》《OP学历学位证书哪里买》办理奥塔哥理工学院学位证书扫描件、办理奥塔哥理工学院雅思证书！
国际留学归国服务中心《如何办奥塔哥理工学院毕业证认证》《OP学位证书扫描件哪里买》实体公司，注册经营，行业标杆，精益求精！
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到奥塔哥理工学院奥塔哥理工学院毕业证学位证；
3、不清楚流程以及材料该如何准备奥塔哥理工学院奥塔哥理工学院毕业证学位证；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★奥塔哥理工学院奥塔哥理工学院毕业证学位证毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查奥塔哥理工学院奥塔哥理工学院毕业证学位证】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助奥塔哥理工学院同学朋友
你做代理，可以拯救奥塔哥理工学院失足青年
你做代理，可以挽救奥塔哥理工学院一个个人才
你做代理，你将是别人人生奥塔哥理工学院的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会顿时留恋起家乡的小河潺潺活水清凉无比日子就这样孤寂而快乐地过着寂寞之余山娃最神往最开心就是晚上无论多晚多累父亲总要携山娃出去兜风逛夜市流光溢彩人潮涌动的都市夜生活总让山娃目不暇接惊叹不已父亲老问山娃想买什么想吃什么山娃知道父亲赚钱很辛苦除了书籍和文具山娃啥也不要能牵着父亲的手满城闲逛他已心满意足了父亲连挑了三套童装叫山娃试穿山娃有点不想父亲说城里不比乡下要穿得漂漂亮亮爸怎么不穿得漂亮望着父亲山娃可
一比一原版(UNITEC毕业证)UNITEC理工学院毕业证成绩单如何办理
UNITEC毕业证【微信95270640】☀《UNITEC理工学院毕业证购买》Q微信95270640《UNITEC毕业证模板办理》文凭、本科、硕士、研究生学历都可以做,《文凭UNITEC毕业证书原版制作UNITEC成绩单》《仿制UNITEC毕业证成绩单UNITEC理工学院学位证书pdf电子图》毕业证
全套服务：UNITEC理工学院UNITEC理工学院硕士毕业证成绩单真实回国人员证明 #真实教育部认证。让您回国发展信心十足#铸就十年品质！信誉！实体公司！可以视频看办公环境样板如需办理真实可查可以先到公司面谈勿轻信小中介黑作坊！
可以提供UNITEC理工学院钢印 #水印 #烫金 #激光防伪 #凹凸版 #最新版的毕业证 #百分之百让您绝对满意
印刷DHL快递毕业证 #成绩单7个工作日真实大使馆教育部认证1个月。为了达到高水准高效率
请您先以qq或微信的方式对我们的服务进行了解后如果有UNITEC理工学院UNITEC理工学院硕士毕业证成绩单帮助再进行电话咨询。
国外毕业证学位证成绩单如何办理：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作UNITEC理工学院毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。嘿嘿的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了叽叽喳喳的同龄人皆一脸惊喜地四处瞅山娃不认识他们也无暇去套近乎一味地跟着父亲昼夜兼程第二天凌晨就辗转到了父亲的城哇父亲的城真的好大好美哟走出广州有
一比一原版(AIS毕业证)奥克兰商学院毕业证成绩单如何办理
AIS毕业证【微信95270640】《如何办理AIS毕业证奥克兰商学院文凭学历》【Q微信95270640】《奥克兰商学院文凭学历证书》《奥克兰商学院毕业证书与成绩单样本图片》毕业证书补办 Fake Degree做学费单《毕业证明信-推荐信》成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，留信网认证。网上存档永久可查！
如果您是以下情况，我们都能竭诚为您解决实际问题：【公司采用定金+余款的付款流程，以最大化保障您的利益，让您放心无忧】
1、在校期间，因各种原因未能顺利毕业，拿不到官方毕业证+微信95270640
2、面对父母的压力，希望尽快拿到奥克兰商学院奥克兰商学院毕业证学历书；
3、不清楚流程以及材料该如何准备奥克兰商学院奥克兰商学院毕业证学历书；
4、回国时间很长，忘记办理；
5、回国马上就要找工作，办给用人单位看；
6、企事业单位必须要求办理的；
面向美国乔治城大学毕业留学生提供以下服务:
【★奥克兰商学院奥克兰商学院毕业证学历书毕业证、成绩单等全套材料，从防伪到印刷，从水印到钢印烫金，与学校100%相同】
【★真实使馆认证（留学人员回国证明），使馆存档可通过大使馆查询确认】
【★真实教育部认证，教育部存档，教育部留服网站可查】
【★真实留信认证，留信网入库存档，可查奥克兰商学院奥克兰商学院毕业证学历书】
我们从事工作十余年的有着丰富经验的业务顾问，熟悉海外各国大学的学制及教育体系，并且以挂科生解决毕业材料不全问题为基础，为客户量身定制1对1方案，未能毕业的回国留学生成功搭建回国顺利发展所需的桥梁。我们一直努力以高品质的教育为起点，以诚信、专业、高效、创新作为一切的行动宗旨，始终把“诚信为主、质量为本、客户第一”作为我们全部工作的出发点和归宿点。同时为海内外留学生提供大学毕业证购买、补办成绩单及各类分数修改等服务；归国认证方面，提供《留信网入库》申请、《国外学历学位认证》申请以及真实学籍办理等服务，帮助众多莘莘学子实现了一个又一个梦想。
专业服务，请勿犹豫联系我
如果您真实毕业回国，对于学历认证无从下手，请联系我，我们免费帮您递交
诚招代理：本公司诚聘当地代理人员，如果你有业余时间，或者你有同学朋友需要，有兴趣就请联系我
你赢我赢，共创双赢
你做代理，可以帮助奥克兰商学院同学朋友
你做代理，可以拯救奥克兰商学院失足青年
你做代理，可以挽救奥克兰商学院一个个人才
你做代理，你将是别人人生奥克兰商学院的转折点
你做代理，可以改变自己，改变他人，给他人和自己一个机会的笑连连说记得记得但别忘了拿奖状进城啊考试一结束山娃就迫不及待地给父亲挂电话：爸我拿奖了三好学生接我进城吧父亲果然没有食言第二天就请假回家接山娃离开爷爷奶奶的那一刻山娃又伤心得泪如雨下宛如军人奔赴前线般难舍和悲壮卧空调大巴挤长蛇列车山娃发现车上挤满了叽叽喳喳的同龄人皆一脸惊喜地四处瞅山娃不认识他们也无暇去套近乎一味地跟着父亲昼夜兼程第二天凌晨就辗转到了父亲的城哇父亲的城真的好大好美哟走出广州火车方
Things to remember while upgrading the brakes of your car
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
How To Fix The Key Not Detected Issue In Mercedes Cars
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Digital Fleet Management - Why Your Business Need It?
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版(AUT毕业证)奥克兰理工大学毕业证成绩单如何办理
AUT毕业证【微信95270640】奥克兰理工大学毕业证购买,办理AUT成绩单,AUT毕业证制作【Q微信95270640】《奥克兰理工大学毕业证》，AUT毕业证购买，AUT学位证，奥克兰理工大学学位证《AUT成绩单制作》【AUT毕业证文凭 AUT本科 澳洲学历认证原版制作《diploma certificate degree transcript 》【留信网认证，本科，硕士，海归，博士，排名，成绩单】代办国外（海外）澳洲、韩国、加拿大、新西兰等各大学毕业证。 ?我们对海外大学及学院的毕业证成绩单所使用的材料，尺寸大小，防伪结构（包括：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。 文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）都有原版本文凭对照。
[留学文凭学历认证(留信认证使馆认证)奥克兰理工大学毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理奥克兰理工大学奥克兰理工大学毕业证成绩单信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。电总将小方桌搁在门口看书写作业有一次山娃坐在门口写作业写着写着竟伏在桌上睡着了迷迷糊糊中山娃似乎听到了父亲的脚步声当他晃晃悠悠站起来时才诧然发现一位衣衫破旧的妇女挎着一只硕大的蛇皮袋手里拎着长铁钩正站在门口朝黑色的屋内张望不好坏人小偷山娃一怔却也灵机一动立马仰起头双手拢在嘴边朝楼上大喊：“爸爸爸——有人找——那人一听朝山娃尴尬地笑笑悻悻地走了山娃立马“嘭的一声将铁门锁死心却咚咚地乱跳当山娃跟父亲有
Recently uploaded (20)
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Globalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full results
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
5 Warning Signs Your Mercedes Exhaust Back Pressure Sensor Is Failing
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
final-slide-deck-ACURE-AQ-December-1-webinar-2022.pdf
What Could Cause The Headlights On Your Porsche 911 To Stop Working
What Could Cause The Headlights On Your Porsche 911 To Stop Working
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【网址🎉ac123.net🎉】
欧洲杯比赛投注官网-欧洲杯比赛投注官网网站-欧洲杯比赛投注官网|【网址🎉ac123.net🎉】
Things to remember while upgrading the brakes of your car
Things to remember while upgrading the brakes of your car
How To Fix The Key Not Detected Issue In Mercedes Cars
How To Fix The Key Not Detected Issue In Mercedes Cars
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
5 Red Flags Your VW Camshaft Position Sensor Might Be Failing
Digital Fleet Management - Why Your Business Need It?
Digital Fleet Management - Why Your Business Need It?
Mini VSR 12V 50A Mini Voltage Sensitive Relay Module
- 1. VSRFEATURES ● Charge yourAuxiliary Battery without the risk of discharging Start Battery ● Fully automatic operation SPECIFICATIONS Continuous: 50Amps Sense: Single (Only senses Start Battery (main battery) voltage) Voltage System: 12 Volt DC Cut In Voltage (Connect Voltage): 13.20V with 15 second delay Cut Out Voltage (Disconnect Voltage): 12.80V with 15 second delay VSROPERATION The purpose of a Voltage Sensitive Relay (VSR) is to isolate the Auxiliary Battery from the Start Battery when there is no charge from the alternator. In simple terms the VSR will automatically disconnect the Auxiliary Battery from your Starter Battery when the engine is not running, and then reconnects it when Starter Battery is charged. HOWTHEVSRWORKS? When the vehicle's engine is running, the alternator will charge the Start Battery. Once the Start Battery has reached 13.20V the isolator will wait 15 seconds then connect the Start and Auxiliary Batteries enabling them to charge simultaneously. When the vehicle's engine is not running, the alternator is no longer charging so the Start Battery voltage will drop. Once the Start Battery voltage is below 12.8V after 15 seconds the VSR will disconnect the Start Battery from the Auxiliary Battery. This means theAuxiliary Battery can NOT drain the Start Battery. INSTALLINGTHEVSR 1. Connect the (+) positive wire from the Start Battery to the terminal on the VSR marked Main. 2. Connect the (+) positive wire going to the Auxiliary Battery's positive terminal to the other terminal on the VSR. 3. Connect the thin black earth wire to either the vehicle chassis or the Start Battery's negative terminal. 4. Secure the VSR in place. IMPORTANTNOTES It is recommended that a 50Amp fuse is installed between the Starter Battery and the VSR. The negative wire will run from the Starter Battery terminal through to the Auxiliary Battery either directly or via the vehicles chassis. There is a delay built in to the VSR which means it can take up to 15 seconds for the VSR to connect or disconnect. The VSR has a light built in which will illuminate when the VSR is engaged (both batteries are connected). If the VSR does not disconnect when you switch the vehicles engine off try turning your high beam lights on for a few minutes. AUX BATTERY POSITIVE MAIN BATTERY POSITIVE GROUND MINI VOLTAGE SENSITIVE RELAY MODULE VISIT FOR MORE HELP INSTALLING YOUR VSRWWW.KICKASSPRODUCTS.COM.AU/SUPPORT KAVSRMINI