High speed photography involves capturing images at 128 frames per second or faster to freeze fast motion. It is the opposite of time lapse photography. There are three main types of high speed cameras: intermittent motion cameras, rotating prism cameras, and rotating mirror cameras. Scanography, also known as scanner photography, is the process of capturing digitized images of 3D objects using a flatbed photo scanner. Unlike traditional scanning, it uses atypical objects placed directly on the scanner bed. Special care must be taken to avoid scratching or cracking the glass bed and to keep it clean.

1. Experimental Photography-
Methods.
Olivia Bolt

2. High Speed Photography
This type of photography is all about taking very fast images at a very fast phenomena. High speed photography is defined by any
set of photographs captured by a camera at 128 frames per second or greater, and of at least three consecutive frames. High-speed
photography can be considered to be the opposite of time lapse photography. High speed photography is seen to freeze the motion.
An photograph will be taken at a high fashion speed rate/ shutter rate. To create this image of freezing a motion. This methods
requires a sensor with a good shutter system and strobe lighting. The first practical application of high speed photography was taken
by Eadweard Muybridge in 1878 where he carried out an investigation to see if a horses feet ever were all off the ground when the
horse ran.
There are three types of high speed cameras are: Intermittent motion cameras, which are a speed-up version of the standard motion
picture camera using a sewing machine type mechanism to advance the film intermittently to a fixed exposure point behind the
objective lens, Rotating prism cameras, which pull a long reel of film continuously past an exposure point and use a rotating prism
between the objective lens and the film to impart motion to the image which matches the film motion, thereby canceling it out, and
Rotating mirror cameras, which relay the image through a rotating mirror to an arc of film, and can only work in a burst mode.

3. Scanography
Scanography is also known to scanner photography. This is the process of capturing digitized images of objects for the purpose of
creating printable art using a flatbed or also known as a` photo scanner with a capturing device. Fine art Scanography differs from
traditional scanning this is because it uses atypical objects. The objects used are often 3D. This method of photography is quite new
and different from anything else because The process of creating art with a scanner can be as simple as arranging objects on the
scanner and capturing the resulting image. The scanner differs significantly from digital cameras in many areas. The optical
resolution of a a flatbed scanner can exceed 5000 pixels per inch. Even at a relatively low resolution of 1200 pixels per inch., a letter
sized image would be 134 megapixels in size. The depth of field for most scanners is very limited, usually no more than half an inch,
but the built-in light source provides excellent sharpness, color saturation, and unique shadow effects. Using a flatbed scanner to
scan items other than paper documents exceeds the original purpose of the scanner, so special care must be taken with the process.
The bed of the scanner is typically made of glass and care needs to be taken that the glass not be scratched or cracked when
placing or removing items on the bed. Since the items to be captured are often placed directly on the bed, dust and other particles
will often land on the glass, and care must be taken to keep the glass clean. Scanners will also hold only a limited amount of weight,
and items that may damage the scanner, such a liquids or items that might scratch the glass, should be placed on a plastic bar to
protect the bed. The simplest use of the scanner, which also most closely matches its use for document capture, is as a specialized
tool for