Metal blackening system
•
0 likes•284 views
Automakers have long used black oxide as an attractive coating for hardware. This economical black semi-gloss finish is often used on latches, hardware brackets and other automotive parts. Now you can reproduce the OEM look of black oxide! Not a paint or dye, Eastwood’s Metal Blackening System provides a true OEM-type coating on any iron or steel part.
Report
Share
Report
Share
Download to read offline
Recommended
Investment Casting Manufacturers Process - Turbo Cast
In this presentation describe about Complete Investment Casting Manufacturers Process and how it works. In this presentation include the formation of the wax injection, pattern removal, assembly, waxing etc...
Powder Metallurgy Processes
Powder Metallurgy enables the processing of materials with very high melting points, including refractory metals such as tungsten, molybdenum, and tantalum. Such metals are very difficult to produce by melting and casting and are often very brittle in the cast state.
Advantages of Powder Metallurgy
It can be very economical for mass production (100,000 parts). Long term reliability through close control of dimensions and physical properties. Very good material utilization - loss of material very less. Minimization or elimination of Machining.
Powder Metallurgy
The document discusses the process of powder metallurgy which involves 6 main steps: 1) powder production through atomization or other methods, 2) blending powders, 3) compaction into shapes, 4) sintering using solid or liquid phase processes, 5) finishing like sizing, and 6) testing. Key advantages are close dimensional control, low scrap rates, and ability to make net-shape parts reducing machining. Applications include automotive components, cutting tools, and fuel for rockets.
Slush casting
...
Slush Casting is a traditional method of permanent mold casting process, where the molten metal is not allowed to completely solidify in the mold. When the desired thickness in obtained, the remaining molten metal in poured out. Slush casting method is an effective technique to cast hollow items like decorative pieces, components, ornaments, etc.
APPLICATIONS
Some casting of pewter is cast using slush casting method. Using pewter and other metals mainly hollow products are casted. Decorative and ornamental objects that are casted are as vase, bowls, candlesticks, lamps, statues, jewelery, animal miniatures, various collectibles etc. Small objects and components for industry like tankard handle, handles for hollow wares, etc.
ADVANTAGES
Slush casting is used to produce hollow parts without the use of cores
The desired thickness can be achieved by pouring our the left over molten metal
A variety of exquisitely designed casting can be casted for decorative and ornamental purpose.
Investment casting
Investment casting, also known as lost-wax casting, is an industrial process for making small, accurate castings. It involves creating a wax or plastic pattern, coating it with ceramic slurry to create a mold, heating to remove the wax, and pouring molten metal into the mold cavity. This allows for casting intricate metal parts with complex internal features and good dimensional accuracy. Common applications include turbine blades, firearms parts, and small precision components.
Underhood black puts
Underhood Black is the right 10-20% semi-gloss finish for most radiator supports, inner fender walls, under hood brackets, and many other parts.
Special casting Techniques
1. Shell casting involves making a shell mold by applying a mixture of sand and thermosetting resin to a heated metal pattern. This allows for casting of parts with complex shapes and good surface finish tolerance.
2. Investment casting, also called lost-wax casting, involves making a wax pattern that is coated with refractory material to form a ceramic mold, melting out the wax to leave a cavity for molten metal. This enables production of parts with intricate details and close tolerances.
3. Die casting uses high pressure to force molten metal into molds, allowing precise replication of complex shapes. It is well-suited for producing parts from non-ferrous alloys in high volumes.
Squeeze Forming or Squeeze Casting Process
It is a near net shape process in which casting and forging is done in single step.
It is Referred by many names such as “squeeze casting” , “pressure infiltration”, “liquid metal forging”, “extrusion casting”, “liquid pressing'', “pressure crystallization”.
Recommended
Investment Casting Manufacturers Process - Turbo Cast
In this presentation describe about Complete Investment Casting Manufacturers Process and how it works. In this presentation include the formation of the wax injection, pattern removal, assembly, waxing etc...
Powder Metallurgy Processes
Powder Metallurgy enables the processing of materials with very high melting points, including refractory metals such as tungsten, molybdenum, and tantalum. Such metals are very difficult to produce by melting and casting and are often very brittle in the cast state.
Advantages of Powder Metallurgy
It can be very economical for mass production (100,000 parts). Long term reliability through close control of dimensions and physical properties. Very good material utilization - loss of material very less. Minimization or elimination of Machining.
Powder Metallurgy
The document discusses the process of powder metallurgy which involves 6 main steps: 1) powder production through atomization or other methods, 2) blending powders, 3) compaction into shapes, 4) sintering using solid or liquid phase processes, 5) finishing like sizing, and 6) testing. Key advantages are close dimensional control, low scrap rates, and ability to make net-shape parts reducing machining. Applications include automotive components, cutting tools, and fuel for rockets.
Slush casting
...
Slush Casting is a traditional method of permanent mold casting process, where the molten metal is not allowed to completely solidify in the mold. When the desired thickness in obtained, the remaining molten metal in poured out. Slush casting method is an effective technique to cast hollow items like decorative pieces, components, ornaments, etc.
APPLICATIONS
Some casting of pewter is cast using slush casting method. Using pewter and other metals mainly hollow products are casted. Decorative and ornamental objects that are casted are as vase, bowls, candlesticks, lamps, statues, jewelery, animal miniatures, various collectibles etc. Small objects and components for industry like tankard handle, handles for hollow wares, etc.
ADVANTAGES
Slush casting is used to produce hollow parts without the use of cores
The desired thickness can be achieved by pouring our the left over molten metal
A variety of exquisitely designed casting can be casted for decorative and ornamental purpose.
Investment casting
Investment casting, also known as lost-wax casting, is an industrial process for making small, accurate castings. It involves creating a wax or plastic pattern, coating it with ceramic slurry to create a mold, heating to remove the wax, and pouring molten metal into the mold cavity. This allows for casting intricate metal parts with complex internal features and good dimensional accuracy. Common applications include turbine blades, firearms parts, and small precision components.
Underhood black puts
Underhood Black is the right 10-20% semi-gloss finish for most radiator supports, inner fender walls, under hood brackets, and many other parts.
Special casting Techniques
1. Shell casting involves making a shell mold by applying a mixture of sand and thermosetting resin to a heated metal pattern. This allows for casting of parts with complex shapes and good surface finish tolerance.
2. Investment casting, also called lost-wax casting, involves making a wax pattern that is coated with refractory material to form a ceramic mold, melting out the wax to leave a cavity for molten metal. This enables production of parts with intricate details and close tolerances.
3. Die casting uses high pressure to force molten metal into molds, allowing precise replication of complex shapes. It is well-suited for producing parts from non-ferrous alloys in high volumes.
Squeeze Forming or Squeeze Casting Process
It is a near net shape process in which casting and forging is done in single step.
It is Referred by many names such as “squeeze casting” , “pressure infiltration”, “liquid metal forging”, “extrusion casting”, “liquid pressing'', “pressure crystallization”.
Plaster mould technique
Plaster mould casting is a metalworking process that uses plaster of paris moulds instead of sand. The plaster is mixed with additives to improve its strength and permeability. The process involves spraying a pattern with parting compound, pouring plaster around it, baking the mould to remove water, and then pouring molten metal into the mould cavity. It produces parts with good surface finish and accuracy, and can be used to cast small and complex non-ferrous metal parts.
Casting procedure and casting defects
This document provides an overview of dental casting procedures and defects. It defines casting and describes the main steps which include making a wax pattern, spruing, investing, burnout of the wax, casting with different methods, cleaning the casting, and finishing and polishing. It also discusses common casting defects such as distortion, surface roughness, porosity, and missing details. The document is intended to educate dental students and professionals about casting techniques and potential defects.
Die casting-power-point
Gravity die casting involves melting an alloy of zinc and aluminum and pouring it into an open steel mold. The mold is then turned upside down and tapped to release the finished casting. Common items made through gravity die casting include toasters, lawnmowers, and car wheel rims.
What is castings & it's types
Manufacturing method which a mould metal components are poured into a mold from a pattern of the desired shape.
Permenant moulding methods
Permanent mould casting is a metal casting process that uses reusable molds to produce castings. There are four main permanent mould casting processes: gravity, slush, low pressure, and vacuum. Gravity process involves preheating the mold and pouring molten metal in. Slush casting produces hollow castings by allowing a shell to solidify before draining the remaining liquid. Low pressure uses gas pressure to push molten metal into the mold, while vacuum casting pulls molten metal into the mold in a vacuum. Permanent mould casting produces castings with good surface finish and dimensional accuracy.
Sand Casting using 3D Printing
The method used to make a set of art castings. Using 3D printing technology to make complex sand cores, not possible by conventional processes.
fused cast azs block
Fused Cast AZS Brick is also called electro Zircon corundum brick, which is abbreviated as AZS because it contains Al2O3－ZrO2－SiO2. Acording to the different content of Zirconia from 33%-41%, fused cast AZS blocks can be divided into three types AZS—33#,AZS—36# and AZS—41#.
Five Steps to Optimize Casting and Eliminate Defects
Traditionally, engineers had a hard time predicting defects with their cast designs. With simulation, engineers can now predict defects from porosity and cold shots to air pockets.
Watch the webinar: http://www.designworldonline.com/optimize-casting-and-eliminate-defects/#_
Castings - Aluminum Gravity die casting Process
"Aluminium die casting processes are hush-hush as Ingot casting or Mould casting.
During the willingly style, head of the line or slight aluminium is appoint
into rolling ore (slab), extrusion alloy (billet) and wire waive ingot which
are as a consequence transformed in semi- and satisfied products... www.alphametalind.com"
Centrifugal casting
The document discusses centrifugal casting, which involves pouring molten metal into a rotating mold. As the mold rotates at around 1000 rpm, centrifugal force throws the liquid metal against the mold walls where it solidifies into the final shape of the casting. Common mold materials include steel, cast iron, and graphite. Centrifugal casting produces parts with fewer defects and impurities compared to static casting methods and allows for higher production rates. Examples of components made through centrifugal casting include pipes, bearing bushes, cylinder liners, and pulley wheels.
INVESTMENT CASTING,,1
Investment casting, also known as lost-wax casting, is an industrial process over 5000 years old. It involves creating a wax pattern, coating it with ceramic slurry to create a mold, heating to remove the wax, and pouring molten metal. This allows for intricate, accurate parts with smooth surfaces and dimensional precision. Though expensive for large volumes, investment casting is well-suited for complex aerospace and firearms components where other methods are infeasible.
Lost Foam Casting (LFC) Process
Lost Foam Casting (LFC) Process is most economical Foundry Molding Technology today which a green technology. It saves 25 to 40% in totality. We provide you Turnkey Project support.
Wear debris analysis
This document discusses lubricant oil analysis and wear debris analysis. It describes how analyzing machine lubricant oils and wear debris particles can help monitor equipment condition, identify abnormal wear or contamination issues, and provide early warnings of potential maintenance needs. Key information extracted from lubricant oil and wear debris analysis includes particle concentrations, types, shapes, sizes, and compositions which can indicate the wear mechanism and likely source of failure occurring within the machine. Together this information helps optimize machine performance, reduce downtime, and increase reliability.
Investment casting
The investment casting process begins by creating wax or plastic patterns of the desired casting shape. These patterns are assembled and surrounded by a refractory slurry mold. The mold is then heated, melting out the pattern and leaving a clean cavity. Molten metal is then poured into the mold to create the casting, which is then separated from the mold. This lost wax process allows for intricate details and smooth surfaces in castings of alloys that are difficult to machine.
C2 casting
This document provides an overview of casting processes and techniques. It begins with learning outcomes and syllabus details for a workshop technology course. The document then covers fundamentals of metal casting including fluid flow, fluidity, heat transfer and solidification. It discusses various casting processes like sand casting, shell mold casting, plaster mold casting, permanent mold casting, investment casting, lost foam casting and vacuum casting. For each process, it provides details on mold materials, production steps, advantages and applications. Diagrams and figures are included to illustrate key aspects of different casting methods.
Gravity die casting
The document discusses gravity die casting or permanent mold casting, which uses permanent molds made of materials like cast iron or steel to pour molten metal into without external pressure. It describes the design of permanent molds including parting lines, risers, and cores. The summary also lists some applications of permanent mold casting such as carburetor bodies, brake cylinders, and aircraft/missile castings.
Presentation on glass manufacturing
This presentation provides an overview of the manufacturing process at Nasir Glass Industries Limited (NGIL) in Bangladesh. It discusses the objectives, introduction, mission, vision, and products of NGIL. It then describes the key steps in glass production, including obtaining raw materials, batching in the control room, melting in the regenerative furnace, floating on molten tin, annealing to reduce stress, automated cutting and finishing, and final products. The goal is to increase understanding of industrial glass manufacturing.
casting ppt
This document provides information on various metal casting processes. It discusses the history of casting and defines the basic casting process as pouring liquid metal into a mold to solidify. It describes the main features of casting like molds, risers, gates, and cores. It categorizes casting processes as open mold or closed mold casting. It further classifies casting into expandable mold casting like sand casting and investment casting, and permanent mold casting like die casting and centrifugal casting. For each process, it provides details on the mold material, advantages, disadvantages and recommended applications. It emphasizes the importance of selecting the right casting process based on the alloy, shape, tolerance and cost requirements of the final part.
New trends in foundry technologies
A foundry produces metal castings using molds. Metals are melted and poured into molds, then allowed to solidify. Common metals cast include aluminum and iron. Molding involves shaping materials using molds. Molds are hollow blocks that materials like plastic or metal are poured into to adopt the mold shape. New technologies have improved foundries by reducing costs, labor, and space needs while improving productivity.
Die casting
Die casting is a process where molten metal is injected into a steel die under high pressure to form complex shapes. Common metals used include aluminum, magnesium, and copper alloys. The die is made of steel and consists of two halves, with one half fixed and the other movable. During die casting, molten metal is injected into the die cavity using pressures up to 9,800 psi and solidifies into the final part. Die casting allows for high production rates and close dimensional tolerances of the parts produced.
Diamond clear
This document provides information on Diamond Clear specialty coatings, including descriptions and pricing for various types. Diamond Clear for bare metal surfaces seals and protects bare metal while resisting temperatures up to 300°F. It also enhances corrosion resistance when used over plated finishes. Diamond Clear for painted surfaces is suitable for topcoating cured painted surfaces like metallics, lacquers and enamels, and withstands up to 250°F. The document also describes a High-Temp Bare Metal Clear coating that resists heat up to 600°F, protects polished metal, and has chip/scratch resistance and UV protection for applications like aluminum intakes and engine parts.
Rejuvenate parts
Take your dull parts to a brilliant luster! Plate almost any metal part – including
brass, copper, and steel (not for aluminum, pot metal, or stainless steel).
More Related Content
What's hot
Plaster mould technique
Plaster mould casting is a metalworking process that uses plaster of paris moulds instead of sand. The plaster is mixed with additives to improve its strength and permeability. The process involves spraying a pattern with parting compound, pouring plaster around it, baking the mould to remove water, and then pouring molten metal into the mould cavity. It produces parts with good surface finish and accuracy, and can be used to cast small and complex non-ferrous metal parts.
Casting procedure and casting defects
This document provides an overview of dental casting procedures and defects. It defines casting and describes the main steps which include making a wax pattern, spruing, investing, burnout of the wax, casting with different methods, cleaning the casting, and finishing and polishing. It also discusses common casting defects such as distortion, surface roughness, porosity, and missing details. The document is intended to educate dental students and professionals about casting techniques and potential defects.
Die casting-power-point
Gravity die casting involves melting an alloy of zinc and aluminum and pouring it into an open steel mold. The mold is then turned upside down and tapped to release the finished casting. Common items made through gravity die casting include toasters, lawnmowers, and car wheel rims.
What is castings & it's types
Manufacturing method which a mould metal components are poured into a mold from a pattern of the desired shape.
Permenant moulding methods
Permanent mould casting is a metal casting process that uses reusable molds to produce castings. There are four main permanent mould casting processes: gravity, slush, low pressure, and vacuum. Gravity process involves preheating the mold and pouring molten metal in. Slush casting produces hollow castings by allowing a shell to solidify before draining the remaining liquid. Low pressure uses gas pressure to push molten metal into the mold, while vacuum casting pulls molten metal into the mold in a vacuum. Permanent mould casting produces castings with good surface finish and dimensional accuracy.
Sand Casting using 3D Printing
The method used to make a set of art castings. Using 3D printing technology to make complex sand cores, not possible by conventional processes.
fused cast azs block
Fused Cast AZS Brick is also called electro Zircon corundum brick, which is abbreviated as AZS because it contains Al2O3－ZrO2－SiO2. Acording to the different content of Zirconia from 33%-41%, fused cast AZS blocks can be divided into three types AZS—33#,AZS—36# and AZS—41#.
Five Steps to Optimize Casting and Eliminate Defects
Traditionally, engineers had a hard time predicting defects with their cast designs. With simulation, engineers can now predict defects from porosity and cold shots to air pockets.
Watch the webinar: http://www.designworldonline.com/optimize-casting-and-eliminate-defects/#_
Castings - Aluminum Gravity die casting Process
"Aluminium die casting processes are hush-hush as Ingot casting or Mould casting.
During the willingly style, head of the line or slight aluminium is appoint
into rolling ore (slab), extrusion alloy (billet) and wire waive ingot which
are as a consequence transformed in semi- and satisfied products... www.alphametalind.com"
Centrifugal casting
The document discusses centrifugal casting, which involves pouring molten metal into a rotating mold. As the mold rotates at around 1000 rpm, centrifugal force throws the liquid metal against the mold walls where it solidifies into the final shape of the casting. Common mold materials include steel, cast iron, and graphite. Centrifugal casting produces parts with fewer defects and impurities compared to static casting methods and allows for higher production rates. Examples of components made through centrifugal casting include pipes, bearing bushes, cylinder liners, and pulley wheels.
INVESTMENT CASTING,,1
Investment casting, also known as lost-wax casting, is an industrial process over 5000 years old. It involves creating a wax pattern, coating it with ceramic slurry to create a mold, heating to remove the wax, and pouring molten metal. This allows for intricate, accurate parts with smooth surfaces and dimensional precision. Though expensive for large volumes, investment casting is well-suited for complex aerospace and firearms components where other methods are infeasible.
Lost Foam Casting (LFC) Process
Lost Foam Casting (LFC) Process is most economical Foundry Molding Technology today which a green technology. It saves 25 to 40% in totality. We provide you Turnkey Project support.
Wear debris analysis
This document discusses lubricant oil analysis and wear debris analysis. It describes how analyzing machine lubricant oils and wear debris particles can help monitor equipment condition, identify abnormal wear or contamination issues, and provide early warnings of potential maintenance needs. Key information extracted from lubricant oil and wear debris analysis includes particle concentrations, types, shapes, sizes, and compositions which can indicate the wear mechanism and likely source of failure occurring within the machine. Together this information helps optimize machine performance, reduce downtime, and increase reliability.
Investment casting
The investment casting process begins by creating wax or plastic patterns of the desired casting shape. These patterns are assembled and surrounded by a refractory slurry mold. The mold is then heated, melting out the pattern and leaving a clean cavity. Molten metal is then poured into the mold to create the casting, which is then separated from the mold. This lost wax process allows for intricate details and smooth surfaces in castings of alloys that are difficult to machine.
C2 casting
This document provides an overview of casting processes and techniques. It begins with learning outcomes and syllabus details for a workshop technology course. The document then covers fundamentals of metal casting including fluid flow, fluidity, heat transfer and solidification. It discusses various casting processes like sand casting, shell mold casting, plaster mold casting, permanent mold casting, investment casting, lost foam casting and vacuum casting. For each process, it provides details on mold materials, production steps, advantages and applications. Diagrams and figures are included to illustrate key aspects of different casting methods.
Gravity die casting
The document discusses gravity die casting or permanent mold casting, which uses permanent molds made of materials like cast iron or steel to pour molten metal into without external pressure. It describes the design of permanent molds including parting lines, risers, and cores. The summary also lists some applications of permanent mold casting such as carburetor bodies, brake cylinders, and aircraft/missile castings.
Presentation on glass manufacturing
This presentation provides an overview of the manufacturing process at Nasir Glass Industries Limited (NGIL) in Bangladesh. It discusses the objectives, introduction, mission, vision, and products of NGIL. It then describes the key steps in glass production, including obtaining raw materials, batching in the control room, melting in the regenerative furnace, floating on molten tin, annealing to reduce stress, automated cutting and finishing, and final products. The goal is to increase understanding of industrial glass manufacturing.
casting ppt
This document provides information on various metal casting processes. It discusses the history of casting and defines the basic casting process as pouring liquid metal into a mold to solidify. It describes the main features of casting like molds, risers, gates, and cores. It categorizes casting processes as open mold or closed mold casting. It further classifies casting into expandable mold casting like sand casting and investment casting, and permanent mold casting like die casting and centrifugal casting. For each process, it provides details on the mold material, advantages, disadvantages and recommended applications. It emphasizes the importance of selecting the right casting process based on the alloy, shape, tolerance and cost requirements of the final part.
New trends in foundry technologies
A foundry produces metal castings using molds. Metals are melted and poured into molds, then allowed to solidify. Common metals cast include aluminum and iron. Molding involves shaping materials using molds. Molds are hollow blocks that materials like plastic or metal are poured into to adopt the mold shape. New technologies have improved foundries by reducing costs, labor, and space needs while improving productivity.
Die casting
Die casting is a process where molten metal is injected into a steel die under high pressure to form complex shapes. Common metals used include aluminum, magnesium, and copper alloys. The die is made of steel and consists of two halves, with one half fixed and the other movable. During die casting, molten metal is injected into the die cavity using pressures up to 9,800 psi and solidifies into the final part. Die casting allows for high production rates and close dimensional tolerances of the parts produced.
What's hot (20)
Five Steps to Optimize Casting and Eliminate Defects
Five Steps to Optimize Casting and Eliminate Defects
Similar to Metal blackening system
Diamond clear
This document provides information on Diamond Clear specialty coatings, including descriptions and pricing for various types. Diamond Clear for bare metal surfaces seals and protects bare metal while resisting temperatures up to 300°F. It also enhances corrosion resistance when used over plated finishes. Diamond Clear for painted surfaces is suitable for topcoating cured painted surfaces like metallics, lacquers and enamels, and withstands up to 250°F. The document also describes a High-Temp Bare Metal Clear coating that resists heat up to 600°F, protects polished metal, and has chip/scratch resistance and UV protection for applications like aluminum intakes and engine parts.
Rejuvenate parts
Take your dull parts to a brilliant luster! Plate almost any metal part – including
brass, copper, and steel (not for aluminum, pot metal, or stainless steel).
New formula
This document provides information on specialty coatings and products for sale, including details on different types of coatings for various metal parts. It lists pricing and product codes for aerosol cans and quarts of coatings like Detail Gray for steel and aluminum, AlumaBlast for aluminum, and Spray Gray for cast iron. It also provides information on zinc coatings that duplicate plating, a new brake coating resistant to brake fluid, and a silver cadmium plating replica. Additional products listed include CRC brand cleaners, lubricants and other automotive maintenance products.
High temp engine paints
This document advertises specialty coatings and paint products for engines, including Glyptal coating that seals engine blocks and keeps oil clean, and Eastwood Liquid Chrome paint that provides a chrome-like finish when applied over black paint. It also features a detailing kit for engine compartments and Eastwood's new line of 650°F high-temperature ceramic engine paints available in factory colors.
Spatter-Color-Trunk-Paints
This document provides information about various paints, coatings, and kits for automotive restoration and protection projects. It lists several spray paints that match original equipment manufacturer trunk and trim colors. It also describes bed liner coating kits that protect vehicle beds better than drop-in liners by not trapping moisture. The document promotes various paints, sealers, undercoatings, and bed liner products available for purchase.
metal-distortion
The document discusses several primers and rust preventatives for welding and painting metals, including:
- Copper Weld-Thru Primer, which provides excellent adhesion and reduces heat distortion during welding.
- Self-Etching Primer, which sticks to bare metals and enhances adhesion of topcoats. It etches and primes in one step.
- Bloxide, an aluminized weldable primer that protects against rust, forms an oxide barrier during welding, and eliminates need to re-clean parts after outdoor storage.
- Fast Etch for dissolving rust in one step and leaving a protective coating.
Stainless steel finishes
Stainless steel finishing can be a complex to solve. There are many different types of surface finishes and profiles that may be required.
restoration of toolmarks
1. The document discusses techniques for restoring obliterated marks on items like vehicles and firearms for identification purposes. 2. It describes different types of marks like cast, engraved, and punched marks and principles of restoration using chemical reagents that dissolve strained metal at different rates. 3. The techniques discussed involve cleaning surfaces, taking photographs, applying etchants like acids selectively to restore serial numbers, and preserving restored marks.
Anvil Luxury Metals Product knowledge
Cold Spray Metal Veneer is a patented process that applies a thin layer of finely ground actual metal onto surfaces using a gravity-feed spray gun. This results in a finish that is 90-97% metal rather than a metal-paint. The metal coating has the same characteristics as solid metal but is lighter and more cost effective. It is durable, versatile, and allows for differentiation in designs compared to competitors. The process offers new coloring and finishing options for expanding visions and enhancing designs with real metal finishes.
Zinc and zinc alloy plating
An overview of zinc and zinc alloy plating technology, mainly for automotive industry. A comparison between their properties is made.
New or old
Rust restricts filters and can flow into carburetors and injectors causing your car to run poorly or prevent starting. Our Gas Tank Sealer Kit cleans away rust and coats the inside with an elastomer that seals minor leaks.
Corrosion? No thanks...
The document describes the various steel treatment and painting processes used on Atlas Copco generators and light towers to protect them from corrosion when exposed to outdoor environments. Different components receive different treatments based on their exposure and importance. All steel components receive a galvanization treatment before further treatments and painting. The canopy receives powder coating, while critical components and the base frame undergo nitrogen laser cutting and cataphoresis before final painting. These treatments help provide long-term corrosion protection and extend the life of components.
Pin-point
This document provides information on products for abrasive blasting, including a handheld spot blasting unit, replacement parts, nozzles, blast hoods, vinyl protectors, cleaning solutions, and different types of abrasive media. Specifications and pricing are provided for each individual product. Safety warnings are also included regarding the proper protective equipment needed when performing abrasive blasting.
Esite Norton Vortex Rapid Blend
Norton lanseeraa uuden valikoiman pinnanviimeistelylaikkoja, joissa on pikakiinnitys. Uuden laikan jokainen pinta on hiova, mikä tarjoaa monipuolisen käytön.
Fertan
The document discusses rust removal and protection products from Hobeca Trading Company, including Fertan rust converter and UBS 220 underbody protection wax. Fertan is a water-based product that penetrates rust, dissolves it, and leaves a protective coating to prevent further rusting. It is safe and environmentally friendly. UBS 220 is a transparent, water-based underbody wax that adheres well and provides long-term protection for vehicle underbodies in harsh conditions. Both products require surface preparation and degreasing before application.
ready-to-paint
Eastwood's line of single-component Rust Converters can convert surface rust into a protective polymeric coating that seals out moisture and prevents future rust formation. The coating can be topcoated with most paints. Rust Converter eliminates the need for sanding, saving time and money, and ensures parts stored remain corrosion-free. It is available in aerosol, quart, and gallon sizes and can be sprayed or brushed on.
Shenzhen Association of Vacuum Rev 3.pptx
This document contains details from a presentation given by Gary Vergason of Vergason Technology, Inc. about replacing chrome plating with physical vapor deposition (PVD) coatings. It discusses the advantages of PVD coatings like SuperChrome over chrome plating, including lower costs, thinner coatings, and eliminating toxic chemicals. The document provides information on PVD coating properties, testing results meeting OEM standards, manufacturing costs estimates for different part sizes, available PVD coating systems, and the part qualification process. It promotes PVD coatings as a robust solution for replacing decorative chrome plating that can reduce costs while meeting specifications.
Dykem catalog
Whether you need to permanently mark metal, wood, glass, rubber, cardboard, or ceramics, DYKEM Brand marking products and layout fluids are proven performers. Carefully formulated and manufactured to deliver vivid color and durable identification marks and color-coding, the DYKEM family of products is an ideal companion for professionals who need quick and effective detection and protection against tampering and changes in settings or controls.
Working cast [Autosaved] - Copy.pptx
This document discusses the process of creating working casts and dies for dental restorations. It defines key terms like die, cast, and die pins. It describes the steps involved in making working casts with separate removable dies or integrated removable dies. Common die materials include gypsum, refractory die materials, and metals like amalgam and sprayed metals. The purpose of a working cast is to serve as a replica of the prepared teeth and ridge to build wax patterns for dental restorations. Precise dies and casts are essential for ensuring accurate marginal fit of crowns and other restorations.
Educational Presentation High Performance Metals
Stainless steel is a highly durable and sustainable material that offers significant lifecycle cost savings compared to other metals due to its corrosion resistance and low maintenance needs. It can last the entire lifespan of a building with little to no upkeep and is fully recyclable. Specifying stainless steel can help contribute to LEED certification points and green building standards due to its environmental benefits. The document provides information on stainless steel grades, fabrication, finishes, examples of architectural applications, and corrosion resistance testing to help designers understand why it is a smart choice for their projects.
Similar to Metal blackening system (20)
More from Robert Jones
Beat-the-heat
The document discusses various sound deadening and heat insulating materials for automotive applications. It provides details on Eastwood's Thermo-Coustic material which uses butyl rubber and aluminum facing to reduce road noise and interior heat. Lab tests showed it reduced noise levels significantly compared to competitors. Application helpers like tape and adhesive are also mentioned for securely attaching the sound deadening materials. Alternative brands like Dynamat, HushMat and Lizard Skin are listed along with their product descriptions and prices.
steering-wheel
The document discusses two sets of nylon pry tools for removing trim and emblems without damaging surfaces. It also discusses kits for restoring steering wheels, including tools and materials for repairing cracks in plastic or Bakelite steering wheels. Finally, it discusses interior/upholstery paints in various colors that can be used to freshen faded vinyl, leather, and plastics without cracking or peeling.
Restore-hardware
This document summarizes vibratory tumblers that can clean and polish small metal parts without risk of damage. Vibratory tumblers use a tumbling action to remove corrosion from hard to reach areas. Users simply add parts and media to the tumbler bowl and turn it on to allow the tumbler to do all the work. The document describes several tumbler models of varying sizes and capabilities for cleaning small to large parts, along with available media types for different cleaning needs.
Eastwood-Rust-Dissolver
1) Eastwood offers products for removing, treating, and preventing rust, including chemical rust removers in liquid and new gel formulas, as well as rust converters and encapsulators to seal rust.
2) Their new Gel Rust Dissolver dissolves rust without submerging metal and is suitable for large surfaces like hoods and fenders.
3) Eastwood is also a source for anti-rust undercoatings and other products to keep rust away on frames, doors, and more.
Rust-Proofing-Gun
This document provides information on rust proofing kits and products from Eastwood. It summarizes:
- The Rust Proofing System kit for $119.99 saves $38.94 and includes a multi-use undercoating gun, flexible wands, rubberized undercoating, heavy-duty anti-rust coating, drill bit, rigid wand, plug caps, and one-year warranty.
- The professional undercoating gun for $199.99 applies undercoatings, soundproofing, gravel protection, and bedliners with adjustable flow and atomization.
- Eastwood offers durable rubberized undercoating and heavy-duty anti-rust coatings in aerosol and
UV-resistant
This document provides pricing and product information for UV-resistant powder coatings from Eastwood. Standard colors are available in gloss, semi-gloss, or satin finishes starting at $8.99 for 1/2 lb up to $89.99 for 10 lbs. Specialty colors range in price from $13.99 for 1/2 lb to $119.99 for 10 lbs. The document lists over 50 powder coating colors categorized by standard and specialty types along with application notes and part numbers.
Fast-powder
This document provides information about various products from Eastwood for powder coating and rust removal. It describes an environmentally friendly coating remover that dissolves coatings in a few minutes when parts are immersed. It also describes a one-step rust remover and phosphate coating called Fast Etch that can be sprayed, brushed or dipped onto rusted parts. Additionally, it mentions a powder coating gun stand, filter, fluidizing attachment and gun cups that help improve the powder coating process.
HotCoat-Gun
The document advertises powder coating kits from HotCoat including the Original HotCoat System for $99.99, the Original HotCoat Gun Deluxe Kit for $139.99 (originally $184.95), and the Original HotCoat Gun Elite Kit for $189.99 (originally $255.90). The kits include a HotCoat gun, powder, accessories, and instructions for easy powder coating of parts using only an air compressor and electric oven. HotCoat powder coating provides a professional finish at a fraction of the cost of a powder coating shop.
Lab-metal
This document provides information and pricing for various products for powder coating metal, including curing lamps, stands, masking tapes, plugs, caps, wire, and an infrared thermometer. A 10"x10" infrared curing lamp is listed at $339.99, while dual-head 12"x36" and single-head 12"x36" curing lamps with stands are $1,399.99 and $849.99 respectively. Various kits of reusable silicone plugs and caps for preventing powder buildup are also listed, ranging in price from $21.99 to $75.99.
Professinal-Buff-Motors
The document provides information about various products for buffing and metal finishing, including an expander wheel for smoothing metal surfaces, flexible shaft kits for buffing larger parts, metalworking abrasive bands in various grits, 3M Trizact bands for precision metalworking, DVDs on buffing techniques, and Baldor buff motors in different horsepower sizes.
underhood-applications
This document provides information on Eastwood powder coating products including:
- A list of over 20 powder coating colors available from Eastwood in various finishes like gloss, metallic, and flat.
- Details on the pricing and packaging options available for Eastwood's hi-temp and standard powders which are suitable for underhood applications and cure at temperatures up to 1000 degrees Fahrenheit.
- Promotions for buyers club membership which offers 15% off powder prices and free shipping for a year, as well as sample kits containing small amounts of various popular powder coating colors.
Paint-Prep-Kits
Eastwood has taken the guesswork out of refinishing with these Painter’s Prep Kits. Each budget-minded kit is designed to accommodate all painters from first-timers to pro.
blast-fast
Serious restorers know abrasive blasting is a fast and effective method for cleaning parts. It removes all traces of old paint, powder and corrosion, leaving the surface ready to accept a new finish.
Soda-blasting
The document discusses soda blasting and describes how it can be used to remove paint and other coatings from metal surfaces without damaging the metal. It introduces Eastwood soda blasters in various sizes that are safe and environmentally friendly alternatives to abrasive blasting. The blasters can be used for tasks like graffiti removal, fire/mold restoration, and detailing work. Safety equipment and replacement parts are also highlighted.
Kafka-way
The legendary Steve Kafka assembled this comprehensive system to teach you the basics and advanced techniques of pinstriping. Learn Steve’s many strokes and unique designs before ever putting a brush to a vehicle.
Master-Blaster
Eastwood’s “Master Blaster” Dual Blaster incorporates the patent pending trigger mounted mixing valve allowing you to switch between bicarbonate soda and any other media of choice for on-the-fly removal of heavy rust on frames and suspensions to delicate removal of paint on metal, glass or chrome.
Abrasive-Blasters
In regular operation, the concave top becomes a welcome feature for easier loading of media. Each tank includes a hood and deadman system.
Multi-Gun
This document summarizes several painting kits and guns for sale. It includes a 3-gun kit that contains two large HVLP guns, one detail gun, fluid tips, cups, and other accessories. Another product is a Binks M1-G HVLP gun for top coats that includes an air cap, cup assembly, and is constructed of corrosion-resistant materials. A DeVilbiss FinishLine gun is also described that can spray various coatings like primers and clears and includes three spray tips and a cup. Disposable cup systems called DeKups are highlighted as well to save on cleanup.
fender-rub
Increase tire or fender clearance, flare fenders and/ or repair wheel arch collision damage with this professional-grade forming tool. The Fender Roller bolts directly to hub flange.
paint-job-perfect
This document provides information on various automotive body repair products from US Chemical and Evercoat, including fillers, primers, and other materials. It lists the products, descriptions, and prices. Key products highlighted include USC All-Metal for repairing damaged metal, Feather-Rite lightweight filler, Slick Sand primer-surfacer, Rage Xtreme filler, and Evercoat's Super Build primer-surfacer. The document encourages searching online for additional USC and Evercoat products.
More from Robert Jones (20)
Recently uploaded
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
原版制作(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书一模一样
学校原件一模一样【微信：741003700 】《(澳洲WSU毕业证书)西悉尼大学毕业证文凭证书》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker Jamieson
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AadiShakti Projects ( Asp Cranes ) Raipur
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Here's Why Every Semi-Truck Should Have ELDs
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Catalytic Converter theft prevention - NYC.pptx
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Recently uploaded (20)
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
MODULE ONE PRPC19 Design of Machine Elements- 1 .pdf
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
Charging and Fueling Infrastructure Grant: Round 2 by Brandt Hertenstein
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Charging Fueling & Infrastructure (CFI) Program by Kevin Miller
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
Charging Fueling & Infrastructure (CFI) Program Resources by Cat Plein
RACI Matrix Managed Services on Cloud 08-11-19_AS.pdf
RACI Matrix Managed Services on Cloud 08-11-19_AS.pdf
Metal blackening system
- 1. SPECIALTY COATINGS Order 24/7 at eastwood.com14 Replicate the look of cadmium plating in 3 easy steps Rub-in an instant cast-iron luster with easy-to-use Manifold Dressing Easy to apply without removing the manifold from the engine. Simply clean the manifold and rub in thoroughly. Non-toxic and water soluble. Very little maintenance needed; just touch-up when required. 11171 Manifold Dressing $20.99 Replicate factory wrinkle finishes Reproduce the original wrinkle finish on parts, heater boxes, dashboards, valve covers, and more. Tack-free in 20 to 30 minutes, and fully hard in 24 hours. Just apply 2 heavy coats – wrinkle develops within 12 hours. For metal only! Primer not required. Covers approx. 4 sq. ft. 10014Z Black Wrinkle Finish Paint, net wt. 12 oz. $12.99 3 or more $12.49 each Coat entire surface with “Gold base coat” 1 Apply random highlights of “Red Zinc” Apply random highlights of “Green Zinc” 2 3 This 3-step paint process can be used on virtually any metal part while also providing long-lasting rust protection. The 3-step system includes: 12 ounce aerosol cans of Gold Base Coat, Red Zinc, and Green Zinc – enough to cover 6 sq. ft. Use Diamond Clear Gloss for Painted Surfaces (10196Z) to enhance appearance and durability. Max. temp. 250°F. For best results, prime rusty metal surfaces with Eastwood Rust Encapsulator, prime clean bare metal surfaces with Eastwood Self Etching Primer (16014Z). Before After 10331Z Golden Cad System $44.99 10349Z Golden Cad System with Diamond Clear $54.99 Golden Cad tints also sold separately 10331ZA Gold Base, 12 oz. net wt. $24.99 10333Z Red Tint, 12 oz. net wt. $16.99 10334Z Green Tint, 12 oz. net wt. $16.99 Metal Blackening System lets you apply an OEM black oxide finish right in your own shop Automakers have long used black oxide as an attractive coating for hardware. This economical black semi-gloss finish is often used on latches, hardware brackets and other automotive parts. Now you can reproduce the OEM look of black oxide! Not a paint or dye, Eastwood’s Metal Blackening System provides a true OEM-type coating on any iron or steel part. It’s safe. It’s simple! Each piece takes only minutes to transform to an oxide black finish. Our kit contains everything you need: one pint of blackening concentrate, one aerosol can of PRE Painting Prep, one aerosol can of Diamond Clear Satin for Bare Metal, one large dipping container, gloves, goggles and detailed instructions. 10238Z Metal Blackening System $39.99 10113ZB Replacement Metal Black Concentrate $17.99 How it works: Just start with clean bare steel, dip in the blackening solution (blackened finish develops in about 60 seconds), rinse, dry and apply Diamond Clear Satin for Bare Metal for a durable factory looking blackened finish.