The document discusses soda blasting and describes how it can be used to remove paint and other coatings from metal surfaces without damaging the metal. It introduces Eastwood soda blasters in various sizes that are safe and environmentally friendly alternatives to abrasive blasting. The blasters can be used for tasks like graffiti removal, fire/mold restoration, and detailing work. Safety equipment and replacement parts are also highlighted.

1. soda blasting: Better for your metal!
removes paint without damaging or warping metal What can you do with an
environmentally friendly, strips without chemicals eastwood soda blaster?
blast around sensitive parts
Safe for metal, fiberglass, plastic,
rubber, glass, and urethane bumpers
graffiti removal
Remove graffiti from concrete, masonry,
steel and other surfaces
Fire/mold damage restoration
50095 50096 Safely remove fire damage from
wooden structures
eastwood 2-in-1 soda/abrasive blaster eastwood Professional-grade
This Eastwood 100 lb. Pressure Blaster includes an 8’ long, 1/2” ID hose,
2-in-1 soda/abrasive blaster
four nozzles, hardware, safety components, and instructions to switch Eastwood 110 lb. Pressure Blaster includes a 10’ long, 1/2” ID blast hose
the blaster from Bicarbonate Soda to abrasive use. Operates on as little as and a 3/32” nozzle designed for the professional. The unit converts
10 cfm at 90 psi. from soda to standard abrasives and back again in only a few minutes.
12256 Eastwood 50 lb. Soda Blaster $249.99* No need to buy a heavy duty compressor, this unit runs on as little
12257 Eastwood 200 lb. Soda Blaster $309.99* as 10 cfm at 90 psi.
50095 Eastwood 100 lb. Soda Blaster $279.99* 50096 Eastwood Professional Soda Blaster $699.99*
50499 Eastwood 100 lb. Soda Blaster and 50 lbs. of 50502 Eastwood Professional Soda Blaster and 50 lbs. of
Media (11807) Orig. $319.98 Save $19.99 $299.99* Media (11807) Orig. $739.98 Save $19.99 $719.99*
51556 Replacement Ceramic Blast Nozzle, 2mm, 3-pack $12.99 22012 Replacement Ceramic Blast Nozzle, 3/32” $12.99
See page 47 for more replacement nozzles See page 47 for more replacement nozzles
*Special shipping charges may apply *Special shipping charges may apply
Convert your current abrasive blaster into a Protection Kit safeguards you
soda blaster in under 15 minutes! while soda blasting
compatible with Eastwood®, Includes Dust mask,
clarke®, ALc®, Rubber Blasting
BRUT™, or Gloves, Head
50lb to 300lb Socks, and face
and other Shield. All you
pressure need to add is
blasters hearing protection.
with a 1/2” NOTE: This kit
or 3/8” NPT is suitable for Bicarbonate
tank bottom Soda dust only! Not to be used for
thread. standard abrasive blasting.
51360 Retro-Fit Kit for 50097 Eastwood Soda Blasting
1/2” or 3/8” NPT Fittings $129.99 Protection Kit $47.99
42 abrasive blasting Order 24/7 at eastwood.com