MECHANICS PRO PPT
•Download as PPT, PDF•
1 like•604 views
This document describes a project to generate electricity from speed breakers. The objective is to produce electricity at a very low cost by capturing the kinetic energy of vehicles passing over the speed breakers. A rack-pinion mechanism is used to convert the vertical motion of the vehicles into rotational motion, which is then converted to electricity using a generator. While the initial experiments generated only a small amount of electricity, the students successfully demonstrated the concept. With further refinement of the design and mechanism, speed breakers could potentially be used to generate meaningful amounts of electricity from vehicle traffic.
Report
Share
Report
Share
Recommended
Electrical by speed braker
This document proposes generating electricity from speed breakers. It suggests using the kinetic energy of vehicles passing over speed bumps to power generators via various mechanisms. Specifically, it describes using a rack and pinion mechanism to convert a vehicle's downward force into rotational motion to turn a generator. Challenges in constructing a prototype generator are discussed. While the initial output was low, the document argues this demonstrates the viability of the concept for producing electricity from speed breakers, with potential for increased output through optimization.
Report speed breaker
This document provides a project report on generating electricity from speed breakers and windmills. It includes sections on fabrication details, main parts of the system like the wooden ramp, metal roller, chain and sprocket mechanism, freewheel mechanism, pulley and belt, dynamo, and windmill. The project aims to utilize the energy lost by vehicles passing over speed breakers to generate electricity, which can then be stored in batteries. Testing results showed an efficiency of 0.4-0.5% for energy captured from speed breakers.
POWER GENERATION FROM SPEED BREAKERS
This document proposes generating electricity from speed breakers. It discusses using the kinetic energy from vehicles passing over speed bumps to power an electric generator via various mechanisms. The scope is to produce low-cost electricity at locations with traffic. Construction details and the basic principle of converting mechanical to electrical energy are provided. Challenges in initial experiments and achieving proper balance are also noted. While output was low, the concept was demonstrated. Future scopes include designs for heavier vehicles and more efficient mechanisms.
Electrical3.1
This document describes a project to generate electricity from speed breakers. Speed breakers cause wasted energy through vehicle friction that passes over them. The project aims to convert this mechanical energy through a rack and pinion gear arrangement connected to a generator. As vehicles pass over the speed breaker, the up and down motion is converted to rotational motion to generate electricity. The electricity could then be used to power street lights or charge batteries. Tests showed increased voltage generation with higher vehicle speeds and loads. The system provides a low-cost way to capture wasted kinetic energy.
power generation from speed breaker
This document discusses generating electricity from speed breakers using vehicles' kinetic and potential energy. It describes two mechanisms - roller and rack/pinion mechanisms. The rack/pinion is more efficient (70% vs 50%) and easier to design for, converting the linear motion of the speed breaker into rotational motion to power a generator. Charts show voltage increasing with vehicle speed and electrical load. In conclusion, this method generates pollution-free power from vehicles at low cost, providing a solution to energy shortages.
eco friendly power generation through Speed breaker using water pressure
Eco friendly power generation using spring coil mechanism .
Here , power is generated using hydro electric power generation principle by spring and piston arrangement. by this we get new idea for generation of power at low price.
Energy Generation through speed breaker(roller type).
This document discusses a student project on smart energy generation. The project aims to generate electricity from renewable sources like kinetic energy from passing vehicles. It proposes using speed breakers with attached generators to convert mechanical energy from vehicle movement into electrical energy. The generated power would be stored in batteries and used for applications like automatic street lights and traffic signaling systems. The document outlines the various components used, including a GSM module, Arduino, LCD display and DC motor generator. It notes advantages like low cost power production and easy maintenance. The conclusion states that further developing the design could significantly improve efficiency and potential for power generation.
Energy Generation from road speed breaker
This document describes a system to generate electricity from the kinetic energy of vehicles passing over a speed breaker. A roller is mounted on a shaft connected to a belt-pulley arrangement coupled to a DC generator. As vehicles pass over the roller, their kinetic energy is converted to rotational motion that drives the generator to produce electricity stored in a battery. The system aims to harness wasted kinetic energy from vehicles to supplement conventional energy sources.
Recommended
Electrical by speed braker
This document proposes generating electricity from speed breakers. It suggests using the kinetic energy of vehicles passing over speed bumps to power generators via various mechanisms. Specifically, it describes using a rack and pinion mechanism to convert a vehicle's downward force into rotational motion to turn a generator. Challenges in constructing a prototype generator are discussed. While the initial output was low, the document argues this demonstrates the viability of the concept for producing electricity from speed breakers, with potential for increased output through optimization.
Report speed breaker
This document provides a project report on generating electricity from speed breakers and windmills. It includes sections on fabrication details, main parts of the system like the wooden ramp, metal roller, chain and sprocket mechanism, freewheel mechanism, pulley and belt, dynamo, and windmill. The project aims to utilize the energy lost by vehicles passing over speed breakers to generate electricity, which can then be stored in batteries. Testing results showed an efficiency of 0.4-0.5% for energy captured from speed breakers.
POWER GENERATION FROM SPEED BREAKERS
This document proposes generating electricity from speed breakers. It discusses using the kinetic energy from vehicles passing over speed bumps to power an electric generator via various mechanisms. The scope is to produce low-cost electricity at locations with traffic. Construction details and the basic principle of converting mechanical to electrical energy are provided. Challenges in initial experiments and achieving proper balance are also noted. While output was low, the concept was demonstrated. Future scopes include designs for heavier vehicles and more efficient mechanisms.
Electrical3.1
This document describes a project to generate electricity from speed breakers. Speed breakers cause wasted energy through vehicle friction that passes over them. The project aims to convert this mechanical energy through a rack and pinion gear arrangement connected to a generator. As vehicles pass over the speed breaker, the up and down motion is converted to rotational motion to generate electricity. The electricity could then be used to power street lights or charge batteries. Tests showed increased voltage generation with higher vehicle speeds and loads. The system provides a low-cost way to capture wasted kinetic energy.
power generation from speed breaker
This document discusses generating electricity from speed breakers using vehicles' kinetic and potential energy. It describes two mechanisms - roller and rack/pinion mechanisms. The rack/pinion is more efficient (70% vs 50%) and easier to design for, converting the linear motion of the speed breaker into rotational motion to power a generator. Charts show voltage increasing with vehicle speed and electrical load. In conclusion, this method generates pollution-free power from vehicles at low cost, providing a solution to energy shortages.
eco friendly power generation through Speed breaker using water pressure
Eco friendly power generation using spring coil mechanism .
Here , power is generated using hydro electric power generation principle by spring and piston arrangement. by this we get new idea for generation of power at low price.
Energy Generation through speed breaker(roller type).
This document discusses a student project on smart energy generation. The project aims to generate electricity from renewable sources like kinetic energy from passing vehicles. It proposes using speed breakers with attached generators to convert mechanical energy from vehicle movement into electrical energy. The generated power would be stored in batteries and used for applications like automatic street lights and traffic signaling systems. The document outlines the various components used, including a GSM module, Arduino, LCD display and DC motor generator. It notes advantages like low cost power production and easy maintenance. The conclusion states that further developing the design could significantly improve efficiency and potential for power generation.
Energy Generation from road speed breaker
This document describes a system to generate electricity from the kinetic energy of vehicles passing over a speed breaker. A roller is mounted on a shaft connected to a belt-pulley arrangement coupled to a DC generator. As vehicles pass over the roller, their kinetic energy is converted to rotational motion that drives the generator to produce electricity stored in a battery. The system aims to harness wasted kinetic energy from vehicles to supplement conventional energy sources.
power generation using speed breaker presentation
A recent survey on the energy consumption in India had published a pathetic report that 85,000 villages in India do
not still have electricity. Supply of power in most part of the country is poor. Hence more research and development and commercialization of technologies are needed in this field. India, unlike the top developed countries has very poor roads. Talking about a particular road itself includes a number of speed breakers. By just placing a unit like the “Power Generation Unit from Speed Breakers”, so much of energy can be tapped. This energy can be used for the lights
on the either sides of the roads and thus much power that is consumed by these lights can be utilized to send power to these villages.
Power generation through speed breakers
This document describes a proposed system to generate electricity from vehicle traffic by converting the kinetic energy of vehicles into rotational motion. It would use a rack and pinion mechanism connected to a dynamo to produce electricity as vehicles drive over it. The document discusses the various components of the system such as the dynamo, battery, and LED lights. It estimates that 100kg of vehicle weight could generate 1 watt of power. The goals are to produce low-cost, eco-friendly electricity to help address energy shortages and power street lights.
Electricity using speed brakers
presentation on production of electricity using speed brakers.
it is helpful for students who are working on projects like this.
it is an inovative idea of generating electricity.
GENERATION OF ELECTRICITY THROUGH SPEED BREAKER
This document describes a project to generate electricity from speed breakers on roads. As vehicles pass over speed breakers, kinetic energy is wasted through heat and friction. This project aims to convert that wasted energy into electrical energy. It proposes installing movable speed breakers connected to a rack and pinion mechanism to convert vertical motion into rotational motion. This rotation would generate electricity using standard generators. The document outlines the working principle, components, advantages, and scope of the project. It aims to provide a sustainable energy source by tapping into kinetic energy from traffic on busy roads.
Power generation from speed
This document describes a project to generate electricity from speed breakers using the kinetic energy of passing vehicles. It discusses using a rack and pinion mechanism to convert the up and down motion of the speed breaker into rotational motion that can power a generator. The objectives are to produce electricity at very low cost and address power shortages. Advantages include pollution-free power, simple design, and not requiring manual labor. Future work could optimize the design for heavier vehicles to increase output. The conclusion states this is a step towards exploring non-conventional energy sources as conventional fuels deplete.
Power generation from speed breakers
This document describes different mechanisms for generating electricity from speed breakers, including spring coil, roller, and rack pinion mechanisms. It provides details on the dimensions and materials used for a sample trapezoidal speed breaker. The spring coil mechanism uses the deflection of springs under vehicle load to drive rotation. For the rack pinion mechanism, the up and down motion is converted to rotation using a rack and pinion gear set. This rotation can then drive sprockets, chains, and a dynamo to generate electricity. Experimental results show voltages generated ranging from 3-15V depending on vehicle speed and load. Benefits include pollution-free power generation while driving is a low-cost way to produce small amounts of electricity.
power generation through speed breaker
1. The document describes a student project to generate electricity using the speed breaker phenomenon.
2. It aims to help address Pakistan's energy crisis by providing a low-cost way to produce electricity through non-conventional means.
3. The project uses a rack and pinion gear mechanism attached to speed breakers to convert the kinetic energy of vehicles into electrical energy via an alternator.
poer generation
This document describes a student project to generate electricity from speed breakers. The project aims to improve India's electricity situation by converting the potential energy of vehicles passing over speed bumps into electrical energy using a rack and pinion mechanism attached to a generator. The system was designed and constructed to prove the concept, though the electrical output was low. Future work could optimize the design to increase output by targeting heavier vehicles and improving the efficiency of the energy conversion mechanism.
Power generation through speed breaker
This document describes a project to generate electricity from the kinetic energy of moving vehicles using a speed breaker system. It includes:
1) A list of 4 team members and their enrollment numbers working on the project.
2) An overview of the system which uses a rack and pinion mechanism connected to an electric dynamo to convert the mechanical energy of vehicles passing over the speed breaker into electrical energy.
3) Calculations showing the system could generate over 10kW of power per day, enough to power 4 street lights at night.
Pgfs document
The document describes a project to generate electricity from speed breakers. It proposes using the kinetic energy of vehicles passing over speed breakers to power lights along roads. A mechanism is designed to convert the up-and-down motion of a speed breaker into rotational motion using a rack and pinion gear system. This rotation is amplified through a sprocket and chain assembly connected to a flywheel and generator to produce electricity that can be stored in a battery and used for lights. The document discusses the working principle, materials used, specifications and equipment required to implement the system.
P.generation from speed breaker
Generation of Electricity from Speed-Breakers
The document proposes a method to generate electricity from the potential energy of vehicles passing over speed bumps. Speed bumps cause vehicles to compress, and this compression could be used to power generators through mechanisms that convert the reciprocating motion into rotational motion. The generated electricity could power street lights, helping to address Pakistan's increasing energy demand and gap between energy production and consumption. Key advantages include using an untapped renewable resource, requiring minimal space and maintenance, and producing pollution-free power. Calculations estimate a single speed bump could generate over 10kW of electricity over 24 hours from passing vehicles.
POWER GENERATION FROM SPEED BREAKER
This document proposes generating power from speed breakers. When vehicles pass over the dome-shaped speed breakers, the kinetic energy is captured through a rack and pinion mechanism that converts the reciprocating motion into rotational motion. This rotation powers generators to produce electricity, with the voltage output varying based on vehicle speed and load. The system aims to harness wasted kinetic energy for low-cost power generation without obstructing traffic flow. Potential applications include street lighting and charging batteries at locations with high vehicle volume like parking lots. While initial construction costs are low, ongoing maintenance is still required.
Power Generation from Speed Breaker Using Crank Shaft
Power Generation from Speed Breaker Using
Crank Shaft
This paper attempts to show how energy can
tapped and used at a commonly used system the load speed
breaker. As the demand of electric power is increasing day-byday
for the working of various appliances. Producing
electricity from various sources is needed like from a speed
breaker is a new concept that is an undergoing research. The
number of vehicles on road is increase rapidly and if we
convert some of the kinetic energy of this vehicle into
rotational motion of roller then we can produce considerable
amount of electricity. The demand of the hour is to have some
source of green energy which can be produce with less (or) no
harmful by-products. Our project is to develop an alternative
green source of energy by moving vehicles on the road ways
Power Generation by speed breakers.
An easy and cheap method for energy production,By energy saving technique.Try it.,, Many other technique like rain water harvesting, weight detection of vehicles in check post areas can also be made consecutively,..
power generation through speed breaker
This document presents a seminar report on generating power through speed breakers. It discusses using the kinetic energy of vehicles passing over speed breakers to power generators through various mechanisms like rack-pinion systems or piezoelectric materials. The report acknowledges faculty guidance and provides an abstract on addressing India's electricity crisis by utilizing wasted energy from speed breakers. It then details the operating principles, results and advantages of different power generation designs, such as producing 0.98 kW from 100 vehicles passing per minute. The conclusion is that speed breaker power generation will be a more efficient and economical alternative energy source in the future.
Power Generation Using Speed Breakers
The slide shows a method of how we can conserve energy using speed breakers when a vehicle crosses it.
electricity generating by using speed breaker
This document describes a mechanism for generating electricity from the kinetic energy of vehicles passing over speed bumps. It introduces different mechanisms considered, including a spring coil mechanism and rack pinion mechanism. When a vehicle passes over the speed bump, the downward force is converted into rotational motion through these mechanisms. This rotation is used to power an electric dynamo, which generates electricity that can be stored in a battery. The document discusses the working principle and provides diagrams of components like the rack and pinion gears and dynamo. Advantages include utilizing wasted energy and providing pollution-free power generation.
Electricity generation using speed breaker
This Slide deals with generating power using a speed breaker.This technology can be implemented on highways and cities and mostly at toll booths.
speed power(external)
The document describes a hardware project to design a speed breaker power generation model using a rack and pinion arrangement. It includes 6 team members and their guides. The project aims to convert the kinetic energy of passing vehicles into electrical energy. It works by using the rack and pinion mechanism to convert vehicle movement into rotational motion that turns a generator to produce electricity stored in a battery. The major components, design specifications, theoretical power calculations, experimental results and advantages are provided.
Power Generation from Speed Breakers
This document proposes a design to generate electricity from speed breakers. It describes using the rack and pinion mechanism to convert the reciprocating motion of vehicles passing over speed breakers into rotational motion. This rotation can then power a generator to produce electricity. The design aims to efficiently capture wasted kinetic energy and produce low-cost power for lighting streets or charging batteries. Experimental results showed the voltage generated increases with vehicle speed and electrical load. The system provides a pollution-free, low-maintenance way to produce renewable energy from kinetic sources.
electricity generation from speed breaker
This document proposes generating electricity from speed breakers using a rack and pinion mechanism. Vehicles passing over speed breakers produce kinetic energy that can be converted to mechanical energy using a rack and pinion system connected to a generator. The rack and pinion arrangement moves more efficiently than roller or air piston mechanisms. Calculations show a typical vehicle passing over a 15cm speed breaker could generate over 7 watts of power, enough to light street lamps. This presents a renewable energy solution that harnesses wasted kinetic energy from vehicles.
Power generation from speed breakers
This document describes a design for a speed bump that generates electricity from the kinetic energy of passing vehicles. It discusses two mechanisms - a spring coil mechanism and rack pinion mechanism - that use vehicles compressing the speed bump to power an electrical generator. The spring coil mechanism uses compressed air from the speed bump to power an air turbine connected to the generator. The design aims to reduce wasted energy from vehicles braking at speed bumps and provide a small amount of renewable energy.
More Related Content
What's hot
power generation using speed breaker presentation
A recent survey on the energy consumption in India had published a pathetic report that 85,000 villages in India do
not still have electricity. Supply of power in most part of the country is poor. Hence more research and development and commercialization of technologies are needed in this field. India, unlike the top developed countries has very poor roads. Talking about a particular road itself includes a number of speed breakers. By just placing a unit like the “Power Generation Unit from Speed Breakers”, so much of energy can be tapped. This energy can be used for the lights
on the either sides of the roads and thus much power that is consumed by these lights can be utilized to send power to these villages.
Power generation through speed breakers
This document describes a proposed system to generate electricity from vehicle traffic by converting the kinetic energy of vehicles into rotational motion. It would use a rack and pinion mechanism connected to a dynamo to produce electricity as vehicles drive over it. The document discusses the various components of the system such as the dynamo, battery, and LED lights. It estimates that 100kg of vehicle weight could generate 1 watt of power. The goals are to produce low-cost, eco-friendly electricity to help address energy shortages and power street lights.
Electricity using speed brakers
presentation on production of electricity using speed brakers.
it is helpful for students who are working on projects like this.
it is an inovative idea of generating electricity.
GENERATION OF ELECTRICITY THROUGH SPEED BREAKER
This document describes a project to generate electricity from speed breakers on roads. As vehicles pass over speed breakers, kinetic energy is wasted through heat and friction. This project aims to convert that wasted energy into electrical energy. It proposes installing movable speed breakers connected to a rack and pinion mechanism to convert vertical motion into rotational motion. This rotation would generate electricity using standard generators. The document outlines the working principle, components, advantages, and scope of the project. It aims to provide a sustainable energy source by tapping into kinetic energy from traffic on busy roads.
Power generation from speed
This document describes a project to generate electricity from speed breakers using the kinetic energy of passing vehicles. It discusses using a rack and pinion mechanism to convert the up and down motion of the speed breaker into rotational motion that can power a generator. The objectives are to produce electricity at very low cost and address power shortages. Advantages include pollution-free power, simple design, and not requiring manual labor. Future work could optimize the design for heavier vehicles to increase output. The conclusion states this is a step towards exploring non-conventional energy sources as conventional fuels deplete.
Power generation from speed breakers
This document describes different mechanisms for generating electricity from speed breakers, including spring coil, roller, and rack pinion mechanisms. It provides details on the dimensions and materials used for a sample trapezoidal speed breaker. The spring coil mechanism uses the deflection of springs under vehicle load to drive rotation. For the rack pinion mechanism, the up and down motion is converted to rotation using a rack and pinion gear set. This rotation can then drive sprockets, chains, and a dynamo to generate electricity. Experimental results show voltages generated ranging from 3-15V depending on vehicle speed and load. Benefits include pollution-free power generation while driving is a low-cost way to produce small amounts of electricity.
power generation through speed breaker
1. The document describes a student project to generate electricity using the speed breaker phenomenon.
2. It aims to help address Pakistan's energy crisis by providing a low-cost way to produce electricity through non-conventional means.
3. The project uses a rack and pinion gear mechanism attached to speed breakers to convert the kinetic energy of vehicles into electrical energy via an alternator.
poer generation
This document describes a student project to generate electricity from speed breakers. The project aims to improve India's electricity situation by converting the potential energy of vehicles passing over speed bumps into electrical energy using a rack and pinion mechanism attached to a generator. The system was designed and constructed to prove the concept, though the electrical output was low. Future work could optimize the design to increase output by targeting heavier vehicles and improving the efficiency of the energy conversion mechanism.
Power generation through speed breaker
This document describes a project to generate electricity from the kinetic energy of moving vehicles using a speed breaker system. It includes:
1) A list of 4 team members and their enrollment numbers working on the project.
2) An overview of the system which uses a rack and pinion mechanism connected to an electric dynamo to convert the mechanical energy of vehicles passing over the speed breaker into electrical energy.
3) Calculations showing the system could generate over 10kW of power per day, enough to power 4 street lights at night.
Pgfs document
The document describes a project to generate electricity from speed breakers. It proposes using the kinetic energy of vehicles passing over speed breakers to power lights along roads. A mechanism is designed to convert the up-and-down motion of a speed breaker into rotational motion using a rack and pinion gear system. This rotation is amplified through a sprocket and chain assembly connected to a flywheel and generator to produce electricity that can be stored in a battery and used for lights. The document discusses the working principle, materials used, specifications and equipment required to implement the system.
P.generation from speed breaker
Generation of Electricity from Speed-Breakers
The document proposes a method to generate electricity from the potential energy of vehicles passing over speed bumps. Speed bumps cause vehicles to compress, and this compression could be used to power generators through mechanisms that convert the reciprocating motion into rotational motion. The generated electricity could power street lights, helping to address Pakistan's increasing energy demand and gap between energy production and consumption. Key advantages include using an untapped renewable resource, requiring minimal space and maintenance, and producing pollution-free power. Calculations estimate a single speed bump could generate over 10kW of electricity over 24 hours from passing vehicles.
POWER GENERATION FROM SPEED BREAKER
This document proposes generating power from speed breakers. When vehicles pass over the dome-shaped speed breakers, the kinetic energy is captured through a rack and pinion mechanism that converts the reciprocating motion into rotational motion. This rotation powers generators to produce electricity, with the voltage output varying based on vehicle speed and load. The system aims to harness wasted kinetic energy for low-cost power generation without obstructing traffic flow. Potential applications include street lighting and charging batteries at locations with high vehicle volume like parking lots. While initial construction costs are low, ongoing maintenance is still required.
Power Generation from Speed Breaker Using Crank Shaft
Power Generation from Speed Breaker Using
Crank Shaft
This paper attempts to show how energy can
tapped and used at a commonly used system the load speed
breaker. As the demand of electric power is increasing day-byday
for the working of various appliances. Producing
electricity from various sources is needed like from a speed
breaker is a new concept that is an undergoing research. The
number of vehicles on road is increase rapidly and if we
convert some of the kinetic energy of this vehicle into
rotational motion of roller then we can produce considerable
amount of electricity. The demand of the hour is to have some
source of green energy which can be produce with less (or) no
harmful by-products. Our project is to develop an alternative
green source of energy by moving vehicles on the road ways
Power Generation by speed breakers.
An easy and cheap method for energy production,By energy saving technique.Try it.,, Many other technique like rain water harvesting, weight detection of vehicles in check post areas can also be made consecutively,..
power generation through speed breaker
This document presents a seminar report on generating power through speed breakers. It discusses using the kinetic energy of vehicles passing over speed breakers to power generators through various mechanisms like rack-pinion systems or piezoelectric materials. The report acknowledges faculty guidance and provides an abstract on addressing India's electricity crisis by utilizing wasted energy from speed breakers. It then details the operating principles, results and advantages of different power generation designs, such as producing 0.98 kW from 100 vehicles passing per minute. The conclusion is that speed breaker power generation will be a more efficient and economical alternative energy source in the future.
Power Generation Using Speed Breakers
The slide shows a method of how we can conserve energy using speed breakers when a vehicle crosses it.
electricity generating by using speed breaker
This document describes a mechanism for generating electricity from the kinetic energy of vehicles passing over speed bumps. It introduces different mechanisms considered, including a spring coil mechanism and rack pinion mechanism. When a vehicle passes over the speed bump, the downward force is converted into rotational motion through these mechanisms. This rotation is used to power an electric dynamo, which generates electricity that can be stored in a battery. The document discusses the working principle and provides diagrams of components like the rack and pinion gears and dynamo. Advantages include utilizing wasted energy and providing pollution-free power generation.
Electricity generation using speed breaker
This Slide deals with generating power using a speed breaker.This technology can be implemented on highways and cities and mostly at toll booths.
speed power(external)
The document describes a hardware project to design a speed breaker power generation model using a rack and pinion arrangement. It includes 6 team members and their guides. The project aims to convert the kinetic energy of passing vehicles into electrical energy. It works by using the rack and pinion mechanism to convert vehicle movement into rotational motion that turns a generator to produce electricity stored in a battery. The major components, design specifications, theoretical power calculations, experimental results and advantages are provided.
Power Generation from Speed Breakers
This document proposes a design to generate electricity from speed breakers. It describes using the rack and pinion mechanism to convert the reciprocating motion of vehicles passing over speed breakers into rotational motion. This rotation can then power a generator to produce electricity. The design aims to efficiently capture wasted kinetic energy and produce low-cost power for lighting streets or charging batteries. Experimental results showed the voltage generated increases with vehicle speed and electrical load. The system provides a pollution-free, low-maintenance way to produce renewable energy from kinetic sources.
What's hot (20)
Power Generation from Speed Breaker Using Crank Shaft
Power Generation from Speed Breaker Using Crank Shaft
Viewers also liked
electricity generation from speed breaker
This document proposes generating electricity from speed breakers using a rack and pinion mechanism. Vehicles passing over speed breakers produce kinetic energy that can be converted to mechanical energy using a rack and pinion system connected to a generator. The rack and pinion arrangement moves more efficiently than roller or air piston mechanisms. Calculations show a typical vehicle passing over a 15cm speed breaker could generate over 7 watts of power, enough to light street lamps. This presents a renewable energy solution that harnesses wasted kinetic energy from vehicles.
Power generation from speed breakers
This document describes a design for a speed bump that generates electricity from the kinetic energy of passing vehicles. It discusses two mechanisms - a spring coil mechanism and rack pinion mechanism - that use vehicles compressing the speed bump to power an electrical generator. The spring coil mechanism uses compressed air from the speed bump to power an air turbine connected to the generator. The design aims to reduce wasted energy from vehicles braking at speed bumps and provide a small amount of renewable energy.
power generation using speed breakers synopsis
This document describes a project to generate electricity from speed breakers using mechanical energy from passing vehicles. A system is proposed that uses the potential energy of a vehicle going over a speed bump to power a generator via a gear mechanism. Sensors are also used to control road lighting more efficiently. Implementing this at traffic points could generate enough electricity to power streetlights and reduce costs for the government. While the design faces challenges in torque and output, it presents a novel way of producing renewable energy from traffic.
power generation by speed breaker
In the present scenario power has becomes major need for human life. Due to day-to-day increase in population and lack of the conventional sources, it becomes necessary that we must depend on non-conventional sources for power generation. While moving, the vehicles posses some kinetic energy and it is being wasted. This kinetic energy can be utilized to produce power by using a special arrangement called “POWER HUMP”.
Power generation using speed breaker
This document describes two mechanisms - a spring coil mechanism and rack pinion mechanism - for generating electricity from vehicles passing over speed bumps. It discusses how the kinetic energy from vehicles can be converted into potential, then pneumatic and electrical energy using these mechanisms. The spring coil mechanism uses springs that compress under vehicle weight, compressing air which turns an impeller to generate electricity. The rack pinion mechanism uses a rack and pinion gear arrangement to convert the linear motion of the speed bump into rotational motion to generate electricity. The document provides details on the design and working of these mechanisms, as well as results of testing voltage generated based on vehicle speed and weight. It concludes that these mechanisms can help reduce wasted energy at speed bumps
power generation from speed breaker
This document describes a speed breaker power generator that converts the kinetic energy of vehicles passing over a speed bump into electrical energy. The generator uses a rack-pinion mechanism and spring coil mechanism to harness the vertical movement of the speed bump. As a vehicle passes over, the speed bump compresses and the stored spring energy is used to power an impeller and alternator, generating electricity. It has potential benefits as a low-cost, small-scale renewable energy source that can be installed at locations with regular vehicle traffic without disrupting traffic flow.
Generation of electricity through speed breaker mechanism(AVANTHI CLG MAKAVAR...
This document describes a project to generate electricity through a speed breaker mechanism. It includes an introduction explaining that kinetic energy from vehicles passing over speed breakers is currently wasted, and this project aims to tap into that energy. It then provides details on the working principle, which uses a rack and pinion system to convert up and down motion into rotation, along with sprockets and chains to further increase rotational speed and power a generator. The document discusses the fabrication process, materials used, specifications, advantages like being pollution-free, and the single disadvantage of needing periodic maintenance. It aims to optimize energy usage and help address energy crises.
Master resume for vikramjit singh
• Mechanical Engineering professional with extensive knowledge in the practical application of science and technology. Specialized in handling Marine Equipment such as Diesel Engines, Air Compressors, Hydraulics, HVAC and Boilers onboard oceangoing Merchant vessels
• 10+ years of proven track record of implementing strategies that enhance productivity and bring efficiency improvement in various machines
• Highly capable of handling health and safety regulations related to transportation of dangerous and hazardous goods such as crude oil, Chemicals, Gasoline at sea
• Possess exemplary communication and analytical skills in troubleshooting Mechanical, controls, Automation, and Electrical faults
• Expertise in providing documentation, detailed instructions, drawings, or specifications to advice Engineers onboard about how devices, parts, equipment, structures are to be fabricated, assembled, modified, maintained and used as per Makers Requirements for Efficient operation
• Ability to inspect Diesel Engine equipment, structures, or materials to identify the cause of errors or other faults
• Competent engineering skills in technical , operational and Maintenance of machines such as Diesel engines, Alternators, Turbochargers, Boilers, Air compressors, Air conditioning and Refrigeration, Hydraulic Machinery, Pumps, Control systems, Electrical equipments such as Motors and Automations of equipments
• Excellent communication and presentation skills in respect to Fuel efficiency, Machinery performance, Budget controls , Inventory of spares, Meeting Energy regulation requirements, implementation of ISO and ISM standards for safe and efficient performance of a vessel
• Core Competencies:
Good knowledge of Arc Welding and fitting job
Proficient in MS Office Applications, Internet, Research, E-mail,
Familiar with AutoCAD 2010 and advanced 3D modeling IDEAS
Proficient with Industrial Risk/Hazards assessment and certified in First Aid/CPR
Good communication skills in English both written and oral with fluency in Hindi, Punjabi.
Certified to work on High Voltage( >1000v) installations as a competent Engineer
Familiar with Canadian Health and Safety Regulations and WHIMS
Proficient in survival craft and Rescue Boat for Emergency Operations
Sensing and Communication using bi-directional LEDs
VLC uses visible light between 400-800 THz for wireless communication. It has several advantages over RF and IR technologies, such as high data rates, unlimited spectrum, safety, and security. However, VLC requires line of sight between transmitter and receiver, limiting its range. The project implements a VLC system using LEDs and photodiodes connected to microcontrollers for audio and serial communication between devices.
"Generating Energy from Road Ribs" for IEEE Abhivyakti'14
The document proposes a design for electricity-generating road ribs that capture the wasted kinetic energy from passing vehicles. It describes 5 mechanisms for how the ribs could generate electricity using the vehicle movement, such as a crankshaft or magnets in a coil. It then explains how this works by transforming the vehicle's kinetic energy into electrical energy via a rotor and magnetic field acting on copper coils. The system uses common electrical components like a 555 IC and transistor to generate and amplify pulses of power for applications. It estimates the output at 2 watts with 14% efficiency. Benefits include renewable energy without pollution, maintenance, or fuel needs while expanding power access.
Data transmission through visible light communication (li fi)
The document is a project report for a Digital Communication course that explores data transmission through visible light communication (VLC). It discusses two prototypes created by the students:
1. A VLC transceiver circuit that was able to transmit and receive data through an LED and photodiode. This demonstrated basic VLC functionality.
2. An audio transmission system using VLC that sent a song from a computer to a speaker using an LED and solar panel receiver.
The report also covers the characteristics of LEDs for VLC, modulation schemes like OFDM that could be used, challenges in implementing the hardware, and techniques for mitigating nonlinear distortion in LEDs. The overall goal was to research and prototype basic V
Electroluminesecnce
This document discusses electroluminescence and electroluminescent displays. It begins by defining electroluminescence as the emission of light from a material in response to electricity. There are two mechanisms for electroluminescence - intrinsic and charge injection. It then covers electroluminescent materials and devices, describing common inorganic and organic materials used, as well as the basic structure and functioning of electroluminescent displays and their advantages over other display technologies. It concludes by discussing the history and applications of electroluminescent displays.
Report on-lifi
Li-fi is transmission of data through illumination by taking the fiber out of fiber optics by sending data through a LED light bulb that varies in intensity faster than the human eye can follow. Li-Fi is a wireless optical networking technology that uses light-emitting diodes (LEDs) for data transmission.
Li-Fi is designed to use LED light bulbs similar to those currently in use in many energy-conscious homes and offices. However, LiFi bulbs are outfitted with a chip that modulates the light imperceptibly for optical data transmission. LiFi data is transmitted by the LED bulbs and received by photoreceptors.
Viewers also liked (13)
Generation of electricity through speed breaker mechanism(AVANTHI CLG MAKAVAR...
Generation of electricity through speed breaker mechanism(AVANTHI CLG MAKAVAR...
Sensing and Communication using bi-directional LEDs
Sensing and Communication using bi-directional LEDs
"Generating Energy from Road Ribs" for IEEE Abhivyakti'14
"Generating Energy from Road Ribs" for IEEE Abhivyakti'14
Data transmission through visible light communication (li fi)
Data transmission through visible light communication (li fi)
Similar to MECHANICS PRO PPT
Electrical.ppt
This document proposes a design to generate electricity from speed breakers. It would work by converting the kinetic energy of vehicles passing over the speed bump into mechanical energy via a rack and pinion mechanism, which would then be converted to electrical energy using a generator. The design aims to provide a low-cost way to produce small amounts of electricity locally at places like parking lots and intersections. Challenges included selecting an appropriate generator and achieving the proper balance of speed and torque. While the initial output was low, the document argues the concept was successfully demonstrated and could be improved in the future with designs for heavier vehicles or more efficient mechanisms.
Speed Breakers.pptx
This document proposes generating electricity from speed breakers using a rack and pinion mechanism. It outlines the aims to design such a mechanism and investigate power generation from kinetic energy of vehicles passing over speed breakers. The methodology involves creating linear motion from the speed bump that turns pinions connected to a generator to produce electricity. Calculations estimate a daily power generation of 56.45 kW could be achieved. The budget for a prototype is estimated at 25,000 rupees. Successful results could utilize the power at traffic signals and streetlights.
power generation through speed breakers
This document describes a proposed system to generate electricity from vehicle traffic using a rack and pinion mechanism. The system would convert the kinetic energy of passing vehicles into rotational motion, which would turn a dynamo to produce electricity. A rack attached to passing vehicles would turn the pinion connected to the dynamo shaft. The document discusses the mechanics of the system and compares it to alternative mechanisms. It also outlines how the generated electricity could be stored in batteries and used for applications like street lighting. The goals of the system are to produce low-cost, eco-friendly electricity from an existing energy source in road traffic.
H2 generation ppt by amol bakane(1)
Amol Bakane proposes using solar power to generate hydrogen fuel as an alternative energy source. He has experience working in electrical projects in oil and gas industries. He intends to implement a hydrogen generation and fueling station project using electrolysis powered by solar panels to produce hydrogen from water. The hydrogen could then be compressed and stored in tanks for use in fuel cell vehicles or to power electrical generators and telecom towers. He is seeking investment to establish hydrogen fueling stations around the world.
Energy management and cost optimization using solar energy
Generating energy that produces no greenhouse gas emissions from fossil fuels and reduces some types of air pollution. To reduce our daily to daily increasing electricity bill cost. Creating economic development and jobs in manufacturing, installation, etc.
Iicdc proposal
This document describes a proposal for a device that can regenerate energy without using fuel. The proposed device uses a small battery to produce a high amount of energy. It then uses a small percentage of the output energy to recharge the original battery, completing the cycle. This device has the potential to address issues like pollution, high energy costs, and reliance on fossil fuels. It could power things like electric rickshaws or home appliances. The proposal outlines the technical details of the design, components used, innovation of the solution, and potential positive impacts on the environment, society and economy.
power generation through speed breaker
power point presentation on power generation through speed breaker through rack- pinion and piezoelectric method .
ELECTRO KINETIC ROAD RAMP.pptx for engineering
This document discusses an electro-kinetic road ramp that can generate electricity from the kinetic energy of passing vehicles. It introduces the concept and methodology, describing how pressure from vehicle tires activates a generator to produce electricity. The ramp model and its hardware/software components are explained. Advantages include pollution-free power, low costs, and energy availability. A case study shows a ramp installed at a UK supermarket that powers cash registers. The conclusion is that the ramp can utilize kinetic energy to produce useful electricity.
Presentation1.pptx
This document proposes a design for a smart speed breaker that can generate electricity from vehicles passing over it. The system would use a rack and pinion mechanism to convert the up and down motion of the speed breaker into rotational motion, which would turn a generator to produce electricity. Springs would return the speed breaker to its original position. The objectives are to utilize wasted kinetic energy from vehicles and produce electricity economically. Potential applications of the generated power include street lights and road signs. Advantages include low cost generation of non-polluting power.
Importance of Solar Energy in India | Solar Energy PDF
VEMC is an ISO 9001:2015 certified organization with over 68 years of experience providing electro-mechanical engineering solutions across various industries such as water, power, irrigation, oil and gas. They offer products and services including pumps, solar energy solutions, and turnkey projects, and have a presence across India with offices in Mumbai and Navi Mumbai. VEMC aims to be a reliable and trusted provider of electro-mechanical solutions while creating value for customers, employees, and society.
Power Generationn.pptx
This document describes a system to generate electricity from vehicles passing over speed bumps. As vehicles pass over speed bumps equipped with a rack and pinion mechanism, their kinetic energy is converted to mechanical energy. This mechanical energy then turns a generator to produce electricity, which is stored in batteries. The stored power can be used for street lights, traffic signals, and other applications along roads with high vehicle traffic. The system provides a sustainable way to generate electricity without fossil fuels at locations where many vehicles pass daily.
SMART CYCLE
This document describes the design and development of a smart electric bicycle. The system uses a single lead-acid battery and a SEPIC converter to boost the voltage from the battery to power a DC motor and drive the rear wheel. A control unit regulates the motor speed using an accelerator. The SEPIC converter allows the system to use a single battery, reducing the bicycle's weight compared to typical electric bicycles that use two batteries. Simulation results showed the SEPIC converter can effectively boost the voltage to drive the motor. The smart electric bicycle provides electric assistance without using fuel and can improve users' health compared to motorcycles or traditional bicycles.
design and constrction of Fuelless Geneartor presentaion.pptx
The document outlines the design and fabrication of a 1KVA fuel-less generator. It discusses the aims of providing an alternative energy source that is more affordable and environmentally friendly than traditional generators. The methodology section describes the materials that will be used, including a DC motor, alternator, battery, and other components. It is expected that the fuel-less generator will be able to generate electricity between 0-1000 Watts and will have an efficiency rate between 56-89% depending on the load. The conclusion states that further development of this fuel-less technology could eventually reduce costs and provide a renewable energy source with low emissions.
Low rpm Generator for efficient energy harnessing from a two stage wind turbine
We have design a low rpm generator for a two stage wind turbine which extract wind energy it will mainly used on the side ways of Motorway
OHMS ENERGY SOLAR
OHMS Energy provides engineering, procurement, and construction (EPC) services for energy projects. It has expertise in transmission and distribution works, small solar projects, and telecom infrastructure. The company aims to execute large turnkey projects in these areas for government and private clients. It is currently managing various government projects in Maharashtra and Rajasthan and seeks new opportunities in solar, transmission, and distribution.
IAM_MICROPROJECT_PPT.pptx
This document discusses selecting a motor for a 2-person electric car. It outlines selection criteria including power supply requirements, energy efficiency, reliability, and speed requirements. Calculations show a motor requiring 1.96 kW of power would be suitable. Brushless DC motors, DC series motors, permanent magnet synchronous motors, and AC induction motors are discussed as options. The conclusion is that a 2 kW induction motor would be a good choice due to advantages like high maximum speed and robust design.
HYBRID ENERGY CAR BY USING SOLAR AND WIND ENERGY
This document discusses the design and components of a hybrid energy car that uses both solar and wind energy. The car aims to address limitations of electric vehicles like limited driving range from a single charge. It uses solar panels and a wind turbine to charge the batteries, allowing continuous charging. The car's components include solar panels, a wind turbine, batteries, a motor controller, batteries, and a motor. By harnessing both solar and wind energy, the hybrid system aims to generate more electricity to power the car and reduce fuel consumption compared to a solely electric vehicle. The document outlines the existing challenges with electric vehicles and how the hybrid solar-wind car seeks to solve them.
EV CHARGING WITH IOT
EV will be the new future of the automobile industry. I am uploading the presentation that how we can use Internet of things in the EV charging stations.
solar consultants corporate credentials (1).pdf
Solar Consultants Firstgreen Ltd is a Kenyan subsidiary of Firstgreen Consulting Pvt Ltd, an Indian EPC and consulting firm providing renewable energy and energy efficiency services globally. Firstgreen Ltd offers solar advisory, EPC, and product sales services for rooftop and utility-scale solar projects. It has extensive experience developing high-quality solar projects worldwide for private and public sector clients. The company aims to provide affordable solar solutions to help increase access to reliable, sustainable energy.
B.Sc. Thesis_Design of a Energy Generating Systems Using Speed Breaker
This document proposes a new technique to generate renewable energy by capturing the wasted kinetic energy from vehicles passing over speed bumps. A prototype system was designed using a rack and pinion mechanism connected to an electric generator. Experimental data showed that a single vehicle passing over the speed bump could generate 19.62 watts of power. Scaling this up, it is estimated that the system could generate 28.25 kilowatts of power per hour from traffic over a 24 hour period. While this offers potential benefits like being low cost and reducing pollution, challenges include the pulsating DC output, corrosion risks, and low efficiency. Further work is needed to design generators and springs for larger scale implementation and integration with the electric grid.
Similar to MECHANICS PRO PPT (20)
Energy management and cost optimization using solar energy
Energy management and cost optimization using solar energy
Importance of Solar Energy in India | Solar Energy PDF
Importance of Solar Energy in India | Solar Energy PDF
design and constrction of Fuelless Geneartor presentaion.pptx
design and constrction of Fuelless Geneartor presentaion.pptx
Low rpm Generator for efficient energy harnessing from a two stage wind turbine
Low rpm Generator for efficient energy harnessing from a two stage wind turbine
B.Sc. Thesis_Design of a Energy Generating Systems Using Speed Breaker
B.Sc. Thesis_Design of a Energy Generating Systems Using Speed Breaker
MECHANICS PRO PPT
- 1. GENERATION OF ELECTRICITY FROM SPEED BREAKER ByBy G.RANGA PAWAN KALYANG.RANGA PAWAN KALYAN J.ROHITH KUMARJ.ROHITH KUMAR M.VAMSI KUMAR REDDYM.VAMSI KUMAR REDDY N.V.MALLIKHAJUNAN.V.MALLIKHAJUNA S.S.SAI BATTHARS.S.SAI BATTHAR Section:09Section:09
- 2. Introduction:-Introduction:- Is anyone happy with current situation of electricity in India??? So, this is our small step to try to improve this situation by our project. First of all what does electricity mean to us??? Electricity- Secondary source of energy i.e. Converted from other sources. We need it for every small thing, still notice it’s importance only during load sheading.
- 3. Objective:-Objective:- In our country there is too much short fall of electricity and we try to overcome this problem by non-conventional source of electricity. One of the non-conventional source of enegy is our project. The objective of our project is to produce electricity by very low price.
- 4. Scopes Merits & usesScopes Merits & uses Low Budget electricity production Less floor area No obstruction to traffic Easy maintenance Suitable at parking of multiplexes, malls,toll booths, signals,etc.
- 5. Basic principle:Basic principle: • Simple energy conversion from Mechanical to Electrical. • To generate electricity using the vehicle weight(potential energy) as input. • Possible using 3 different mechanisms: I. crank-shaft mechanism II. Roller mechanism III.Rack-pinion mechanism
- 6. Why Rack-pinion Mechanism????????Why Rack-pinion Mechanism???????? Crank-shafts are required to be mounted on bearings which creates balancing problems leading to mechanical vibrations which in turn damage the bearings. Secondly as bearings are of sliding type, any occurrence of variable load(which is bit obvious in case of vehicles!!)leads to balancing problem.
- 7. Roller mechanism has some different disadvantages . Maintenance will be very difficult Might cause collision.
- 8. What we did??? Rack-pinion assembly gives good mounting convenience Maximum gear losses 3 to 5% Efficiency -95%
- 9. Initial experiments-PMDC motor as Generator How is electricity generated???? Basic principle of generation of electricity. What we did??? Construction of generator:Construction of generator:
- 10. Challenges we are faced:Challenges we are faced: Selecting suitable generator Selection of springs Achieving proper balance of speed and torque
- 11. What we achieved??What we achieved?? We LEARNT a lot. Constructed our own generator by applying the basic principle. Although we got less electrical output, we have successfully explained our idea of generating electricity from speed breaker.
- 12. Such speed breakers can be designed for heavy vehicles, thus increasing input torque and ultimately output of generator. More suitable and compact mechanisms to enhance efficiency. Future scope:Future scope:
- 13. AdvantagesAdvantages Pollution free power generation. Simple construction , mature technology , and easy maintenance. No manual work necessary during generation. Energy available all year round.
- 14. Conclusion:-Conclusion:- The existing source of energy such as coal, oil etc., may not be adequate to meet the ever increasing. These conventional sources at energy also depilating and may be exhausted. It is an non conventional type of producing the energy. This project is a one step to path of exploring the possibilities of energy from several non- conventional energy sources.