General principles – Direct gain systems - Glazed walls, Bay windows,
Attached sun spaces etc. Indirect gain systems – Trombe wall, Water wall, Solar Chimney, Transwall, Roof
pond, etc - Isolated gain systems – Natural convective loop etc. Active Heating Systems : Solar water
heating systems
General principles – Direct gain systems - Glazed walls, Bay windows,
Attached sun spaces etc. Indirect gain systems – Trombe wall, Water wall, Solar Chimney, Transwall, Roof
pond, etc - Isolated gain systems – Natural convective loop etc. Active Heating Systems : Solar water
heating systems
Natural ventilation and air movement could-be considered under the heading of 'structural controls’ as it does not rely on any form of energy supply or mechanical installation, but due to its importance for human comfort, it deserves a separate section.
This lecture illustrates the opportunities for Passive House on commercial projects. Follow four case studies and learn how the Passive House building energy standard affects project planning, design, and what changes are made to the building envelope and mechanical systems to achieve it. Furthermore, this session highlights the differences in initial cost and life cycle cost, and provide insights into the energy conservation and CO2 reduction potential.
Intep & TE Studio designed the first certified Passive House in North America, as well as the first certified cold climate Passive House and the first certified cold climate Passive House retrofit (EnerPHit) in the world. Learn more at intep.com and testudio.com
Natural ventilation and air movement could-be considered under the heading of 'structural controls’ as it does not rely on any form of energy supply or mechanical installation, but due to its importance for human comfort, it deserves a separate section.
This lecture illustrates the opportunities for Passive House on commercial projects. Follow four case studies and learn how the Passive House building energy standard affects project planning, design, and what changes are made to the building envelope and mechanical systems to achieve it. Furthermore, this session highlights the differences in initial cost and life cycle cost, and provide insights into the energy conservation and CO2 reduction potential.
Intep & TE Studio designed the first certified Passive House in North America, as well as the first certified cold climate Passive House and the first certified cold climate Passive House retrofit (EnerPHit) in the world. Learn more at intep.com and testudio.com
Micro Climate Analysis and Passive Design
Bio Climatic Design and Thermal Comfort
Radiant System Capacity Evaluation
Low Energy Passive Design Strategy Matrix
Net Zero Energy School Energy Modeling Case Study
Low Energy Research Lab Energy Modeling Case Study
VAV Thermal Diffuser Parametric Energy Modeling Analysis
Plug Load Monitoring of Our Workstations
Core & Shell Energy and Daylight Modeling to Net Zero Case Study
Indoor and Outdoor Thermal Comfort Analysis
Green Building: Sustainable Architecture
Environmentally responsible and resource efficient building design. Architecture that minimizes the negative environmental impact of buildings by efficiency in the use of materials and energy. Goal: to effectively reduce the overall impact of the built environment on human health and the natural environment and increase comfort and livability. Consistent with AIA sponsored Architecture Challenge 2030.
McNaughton Architectural Inc. | http://mna-p.com
300 E State St Suite 360, Redlands, CA 92373
(909) 583-1806
New Kid on the Block: Passive House Comes into Pittsburgh's Neighborhoodlucyna99
Super energy efficient and modern Passive House Duplex has been designed for Squirrel Hill neighborhood in Pittsburgh, PA. A Passive House is so well insulated and is so air-tight that heating and cooling energy is cut by up to 80% compared to standard new construction. Half of the duplex is available for pre-sale.
Energy and Indoor Air Quality Impacts of DOAS Retrofits in Small Commercial B...RDH Building Science
Heating, ventilating and air-conditioning (HVAC) typically accounts for 30% to 50% of commercial building energy use. Small commercial buildings often use oversized and inefficient rooftop air handling units (RTUs) to provide both air conditioning and ventilation. A conversion strategy to reduce energy
consumption is the installation of a very high efficiency dedicated outdoor air system (DOAS) to provide ventilation with a separate heat pump system to provide heating and cooling. Decoupling the heating and cooling from ventilation allows for improved energy efficiency and control of space conditions. Upgrades to mechanical systems can also improve the indoor air quality (IAQ) and comfort through control of carbon dioxide (CO2) concentrations, dry bulb temperature, and relative humidity (RH).
A pilot study of eight buildings was conducted to investigate the potential benefits of replacing existing RTUs with high efficiency heat recovery ventilators (HRVs) and air source heat pumps in the Pacific Northwest. This report contains results for a subset of seven buildings for which data is available. The
building energy use before and after the conversion was determined using utility data, energy modeling and monitoring. Indoor environmental conditions were measured at hourly intervals for up to one year postconversion using CO2, temperature, and RH sensors. The data was analyzed to determine changes in energy use and IAQ before and after the conversion.
This paper presents the pilot building results pre- and post-conversion. While several factors need to be in place to ensure optimal performance and cost effectiveness, the pilot shows that replacing RTUs with DOAS systems in existing commercial buildings can both reduce energy use as well as improve indoor environmental conditions. This conversion type is viable for a wide variety of building types and scale-up of the retrofits has the potential to significantly improve a previously underserved segment of the building stock.
Presented by James Montgomery at the 15th Canadian Conference on Building Science and Technology.
Introduction to Passive House for Architects by Elrond Burrell, director of V...Elrond Burrell
Slides from a CPD webinar presented for the NZIA
5 things to know about Passive House
The Passive House Standard
Passive House Design
Passive House in NZ so far
UK large scale examples
The Benefits of Passive House
Powerpoint accompanying workshop session from the Homeless and Housing Coalition of Kentucky's 2013 conference. Presented by
Josh Trent, Director of Communities & Design at Frontier Housing will discuss his success at reducing the construction
cycle time by more than 50%, and Frontier Housing’s award winning success at constructing homes to exceed the
Energy Star Standard.
Green seems to be the one area of the construction industry insulated from the downturn. Learn more about the biggest trend in the building and remodel industry in a fast paced, interesting seminar from an industry expert . Some great hands-on and DIY information.
Panache Green tech Solutions Pvt. Ltd. ( PGTS) takes the privilege to introduce itself as pioneers in providing Energy Efficient Building Enveloping with its range of innovative products, systems & to deliver the Concept of “Cool Homes without AC!”
Panache started its journey in 2008 as Aesthetic Solutions and in a short span of 6 years it has a wide spectrum clientele of Platinum , Gold LEED rated buildings ,Commercial , Residential and Industrial projects.
Panache with the conscious efforts to promote environment friendly approach , comprises a complete product range of water based products & excels to innovate in sustainable designs , products & systems for various applications.
Please visit:- www.panachegreen.com
Follow our Facebook Page by liking the link
https://www.facebook.com/panachegreen.pgtech
Follow us on twitter
https://twitter.com/PanacheGTech
http://panachegreen.blogspot.in/
Similar to Passive House Principles for Hot Humid Climates (20)
Essentials of Automations: Optimizing FME Workflows with ParametersSafe Software
Are you looking to streamline your workflows and boost your projects’ efficiency? Do you find yourself searching for ways to add flexibility and control over your FME workflows? If so, you’re in the right place.
Join us for an insightful dive into the world of FME parameters, a critical element in optimizing workflow efficiency. This webinar marks the beginning of our three-part “Essentials of Automation” series. This first webinar is designed to equip you with the knowledge and skills to utilize parameters effectively: enhancing the flexibility, maintainability, and user control of your FME projects.
Here’s what you’ll gain:
- Essentials of FME Parameters: Understand the pivotal role of parameters, including Reader/Writer, Transformer, User, and FME Flow categories. Discover how they are the key to unlocking automation and optimization within your workflows.
- Practical Applications in FME Form: Delve into key user parameter types including choice, connections, and file URLs. Allow users to control how a workflow runs, making your workflows more reusable. Learn to import values and deliver the best user experience for your workflows while enhancing accuracy.
- Optimization Strategies in FME Flow: Explore the creation and strategic deployment of parameters in FME Flow, including the use of deployment and geometry parameters, to maximize workflow efficiency.
- Pro Tips for Success: Gain insights on parameterizing connections and leveraging new features like Conditional Visibility for clarity and simplicity.
We’ll wrap up with a glimpse into future webinars, followed by a Q&A session to address your specific questions surrounding this topic.
Don’t miss this opportunity to elevate your FME expertise and drive your projects to new heights of efficiency.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf91mobiles
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
Epistemic Interaction - tuning interfaces to provide information for AI supportAlan Dix
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
Key Trends Shaping the Future of Infrastructure.pdfCheryl Hung
Keynote at DIGIT West Expo, Glasgow on 29 May 2024.
Cheryl Hung, ochery.com
Sr Director, Infrastructure Ecosystem, Arm.
The key trends across hardware, cloud and open-source; exploring how these areas are likely to mature and develop over the short and long-term, and then considering how organisations can position themselves to adapt and thrive.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
LF Energy Webinar: Electrical Grid Modelling and Simulation Through PowSyBl -...DanBrown980551
Do you want to learn how to model and simulate an electrical network from scratch in under an hour?
Then welcome to this PowSyBl workshop, hosted by Rte, the French Transmission System Operator (TSO)!
During the webinar, you will discover the PowSyBl ecosystem as well as handle and study an electrical network through an interactive Python notebook.
PowSyBl is an open source project hosted by LF Energy, which offers a comprehensive set of features for electrical grid modelling and simulation. Among other advanced features, PowSyBl provides:
- A fully editable and extendable library for grid component modelling;
- Visualization tools to display your network;
- Grid simulation tools, such as power flows, security analyses (with or without remedial actions) and sensitivity analyses;
The framework is mostly written in Java, with a Python binding so that Python developers can access PowSyBl functionalities as well.
What you will learn during the webinar:
- For beginners: discover PowSyBl's functionalities through a quick general presentation and the notebook, without needing any expert coding skills;
- For advanced developers: master the skills to efficiently apply PowSyBl functionalities to your real-world scenarios.
"Impact of front-end architecture on development cost", Viktor TurskyiFwdays
I have heard many times that architecture is not important for the front-end. Also, many times I have seen how developers implement features on the front-end just following the standard rules for a framework and think that this is enough to successfully launch the project, and then the project fails. How to prevent this and what approach to choose? I have launched dozens of complex projects and during the talk we will analyze which approaches have worked for me and which have not.
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
GraphRAG is All You need? LLM & Knowledge GraphGuy Korland
Guy Korland, CEO and Co-founder of FalkorDB, will review two articles on the integration of language models with knowledge graphs.
1. Unifying Large Language Models and Knowledge Graphs: A Roadmap.
https://arxiv.org/abs/2306.08302
2. Microsoft Research's GraphRAG paper and a review paper on various uses of knowledge graphs:
https://www.microsoft.com/en-us/research/blog/graphrag-unlocking-llm-discovery-on-narrative-private-data/
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
37. Heating Degree DaysHeating Degree Days
Cooling Degree DaysCooling Degree Days
Winter Design TempratureWinter Design Temprature
Summer Design TemperatureSummer Design Temperature
Passive Building is Climate Dependent!!
Summer Design TemperatureSummer Design Temperature
HumidityHumidity
Solar RadiationSolar Radiation
Night Sky RadiationNight Sky Radiation
Ground TemperatureGround Temperature
38. Latent vs Sensible Ventilation Load
Indexes
U.S. has more climate zones
than the
entire European Union!!
(Image Source: from ASHRAE Journal, November, 1997 pp 37 - 45)
Image Source: www.energycodes.gov
39. Climate Specific Space Conditioning
Requirements
Graph Courtesy of Global Buildings Performance Network
54. Save the Date!
October 16-19, 2013
8th Annual North American Passive House
7th7th7th7th Annual North American Passive House ConferenceAnnual North American Passive House ConferenceAnnual North American Passive House ConferenceAnnual North American Passive House Conference
September 27September 27September 27September 27----30, 2012 Denver CO30, 2012 Denver CO30, 2012 Denver CO30, 2012 Denver CO
8th Annual North American Passive House
Conference, Pittsburgh, PA
Katrin Klingenberg
katrin@passivehouse.us
Executive Director | PHIUS