Kendel Avaya-Fabric connect - Demo Lab Guide – L3VSN & Multicast-8
•Download as PPTX, PDF•
2 likes•292 views
This document provides instructions for configuring and checking L3VSNs and multicast routing on Avaya switches. It describes how to create a VRF instance to separate application routing, enable ECMP for equal cost path load balancing, and configure IGMP and PIM for multicast routing within the VRF. Commands are provided to verify the VRF configuration, IP routing table, IS-IS routes, and multicast routes.
Report
Share
Report
Share
Recommended
Kendel Avaya-Fabric connect -Demo Lab Guide – SPB IP Shortcuts-3
This document provides instructions for configuring IP shortcuts and DHCP relay on an Avaya VSP network. It describes enabling ECMP for load balancing IP traffic across multiple equal-cost paths. Configuration steps include enabling IP routing on the default VRF, creating a VLAN, assigning an IP address, enabling IS-IS redistribution and applying the configuration. Checks include viewing IP routes and the IS-IS FIB. DHCP relay is configured by enabling it on an interface and specifying the DHCP server IP addresses.
Kendel Avaya-fabric Connect - Demo Lab Guide – SPB L2VSN-2
This document discusses three types of L2 Virtual Service Networks (L2VSNs) - UNI type, switched, and transparent. The UNI type assigns each endpoint a unique identifier of port and VLAN. The switched type maps an entire VLAN to a single I-SID. The transparent type sends all traffic from a port to a single I-SID regardless of VLAN. It provides examples of creating an L2VSN and checking connectivity across it.
Kendel Avaya-Fabric connect - Demo Lab Guide - basic-1
This document provides instructions for configuring the basic elements of SPB (Shortest Path Bridging) on an Avaya VSP network. The key steps include:
1) Allocating a unique Node-ID and SPB parameters like nickname and B-MAC to each node.
2) Configuring IS-IS parameters like the area ID, backbone VLAN IDs, and interface addresses.
3) Activating SPB for IP extensions by adding a loopback IP and assigning it to SPB.
4) Configuring NNI interfaces between nodes with settings for authentication, metrics, and VLACP.
Kendel Avaya-Fabric connect - Demo Lab Guide – Spoof Detect & SLPP-6
1) The document discusses features for spoof detection and SLPP (Simple Loop Prevention Protocol) on Avaya switches.
2) It describes how to enable spoof detection on switch ports to detect spoofing devices and prevent traffic from spoofed MAC addresses.
3) It also explains how to configure SLPP globally and on interfaces to detect and prevent network loops.
Kendel Avaya-Fabric connect - Demo Lab Guide – SPB vIST-5
This document provides instructions for configuring a virtual inter-switch trunk (vIST) between two Avaya switches to enable connectivity. The key steps are:
1. Create a VLAN for the vIST and assign it an IP address on each switch. Map the VLAN to an I-SID.
2. Configure a route map to suppress the propagation of the vIST IP addresses and redistribute direct routes.
3. Configure the virtual IST with the peer IP address and VLAN.
4. Configure SMLT and LACP settings as needed to support third party devices connecting through the vIST.
Kendel Avaya-Fabric connect - Demo Lab Guide – L2VSN Multicast-7
This document provides instructions for enabling Layer 2 Virtual Services Network (L2VSN) multicast on an Avaya network. It describes how to create a VLAN and I-SID for multicast traffic, enable IP multicast routing under ISIS, and configure IP shortcuts to enable multicast traffic to take the shortest path. Key steps include creating a VLAN for cameras, assigning interfaces, enabling multicast on the network, checking multicast configuration and traffic, and enabling IP shortcuts for multicast.
Kendel Avaya-FC - Demo Lab Guide – SPB VRRP-RSMLT-4
This document provides instructions for configuring VRRP and RSMLT on Avaya switches to enable active-active connectivity between data centers or within a single data center. It shows the CLI commands to create VLANs, assign IP addresses, enable VRRP with a backup master, and configure RSMLT on peer switches with a long holdup timer. The goal is to leverage these protocols to provide redundancy and load sharing across multiple physical paths.
Kendel Avaya-Fabric connect - Demo Lab Guide – Macsec-9
This document provides instructions for enabling MACsec encryption on Avaya switches to encrypt and decrypt traffic on wired networks. It lists which Avaya switch models support MACsec and provides the configuration commands needed to enable MACsec on an interface, configure a connectivity association, enable replay protection and view MACsec status and statistics.
Recommended
Kendel Avaya-Fabric connect -Demo Lab Guide – SPB IP Shortcuts-3
This document provides instructions for configuring IP shortcuts and DHCP relay on an Avaya VSP network. It describes enabling ECMP for load balancing IP traffic across multiple equal-cost paths. Configuration steps include enabling IP routing on the default VRF, creating a VLAN, assigning an IP address, enabling IS-IS redistribution and applying the configuration. Checks include viewing IP routes and the IS-IS FIB. DHCP relay is configured by enabling it on an interface and specifying the DHCP server IP addresses.
Kendel Avaya-fabric Connect - Demo Lab Guide – SPB L2VSN-2
This document discusses three types of L2 Virtual Service Networks (L2VSNs) - UNI type, switched, and transparent. The UNI type assigns each endpoint a unique identifier of port and VLAN. The switched type maps an entire VLAN to a single I-SID. The transparent type sends all traffic from a port to a single I-SID regardless of VLAN. It provides examples of creating an L2VSN and checking connectivity across it.
Kendel Avaya-Fabric connect - Demo Lab Guide - basic-1
This document provides instructions for configuring the basic elements of SPB (Shortest Path Bridging) on an Avaya VSP network. The key steps include:
1) Allocating a unique Node-ID and SPB parameters like nickname and B-MAC to each node.
2) Configuring IS-IS parameters like the area ID, backbone VLAN IDs, and interface addresses.
3) Activating SPB for IP extensions by adding a loopback IP and assigning it to SPB.
4) Configuring NNI interfaces between nodes with settings for authentication, metrics, and VLACP.
Kendel Avaya-Fabric connect - Demo Lab Guide – Spoof Detect & SLPP-6
1) The document discusses features for spoof detection and SLPP (Simple Loop Prevention Protocol) on Avaya switches.
2) It describes how to enable spoof detection on switch ports to detect spoofing devices and prevent traffic from spoofed MAC addresses.
3) It also explains how to configure SLPP globally and on interfaces to detect and prevent network loops.
Kendel Avaya-Fabric connect - Demo Lab Guide – SPB vIST-5
This document provides instructions for configuring a virtual inter-switch trunk (vIST) between two Avaya switches to enable connectivity. The key steps are:
1. Create a VLAN for the vIST and assign it an IP address on each switch. Map the VLAN to an I-SID.
2. Configure a route map to suppress the propagation of the vIST IP addresses and redistribute direct routes.
3. Configure the virtual IST with the peer IP address and VLAN.
4. Configure SMLT and LACP settings as needed to support third party devices connecting through the vIST.
Kendel Avaya-Fabric connect - Demo Lab Guide – L2VSN Multicast-7
This document provides instructions for enabling Layer 2 Virtual Services Network (L2VSN) multicast on an Avaya network. It describes how to create a VLAN and I-SID for multicast traffic, enable IP multicast routing under ISIS, and configure IP shortcuts to enable multicast traffic to take the shortest path. Key steps include creating a VLAN for cameras, assigning interfaces, enabling multicast on the network, checking multicast configuration and traffic, and enabling IP shortcuts for multicast.
Kendel Avaya-FC - Demo Lab Guide – SPB VRRP-RSMLT-4
This document provides instructions for configuring VRRP and RSMLT on Avaya switches to enable active-active connectivity between data centers or within a single data center. It shows the CLI commands to create VLANs, assign IP addresses, enable VRRP with a backup master, and configure RSMLT on peer switches with a long holdup timer. The goal is to leverage these protocols to provide redundancy and load sharing across multiple physical paths.
Kendel Avaya-Fabric connect - Demo Lab Guide – Macsec-9
This document provides instructions for enabling MACsec encryption on Avaya switches to encrypt and decrypt traffic on wired networks. It lists which Avaya switch models support MACsec and provides the configuration commands needed to enable MACsec on an interface, configure a connectivity association, enable replay protection and view MACsec status and statistics.
Excelfore releases Full Ethernet AVB Stack for ADAS and Infotainment Endpoint...
AVB software architecture on ARM Cortex SOCs
Summary: Traditional clocking synchronization in networked A/V systems is done via elaborate means. In the automotive sector, the clock synchronization of displays and multi-channel audio in an infotainment platform is implemented using MOST, which is an isochronous environment. In the Pro-A/V area, the displays are synchronized through a combination of separate master clock control link and fixed delay compensation depending on the length of the control link. Synchronization thus has been a tedious and time consuming exercise. Standard Ethernet does not provide QoS and it is an asynchronous environment, although topologies exist to provide it today.
The Ethernet AVB Protocol (IEEE1722+IEEE1588 or 802.1AS) in one such standard that formally brings a QoS and synchronization implementation to Ethernet. By providing global time synchronization mechanism combined with a protocol of prioritization of streams as they pass through switches, Ethernet AVB offers an Isochronous environment similar to that of the MOST bus. Ethernet AVB protocol allows widespread proliferation of Ethernet standard in Automotive, Pro-AV and Pro-Audio systems.
Examples of Ethernet AVB application are:
1) Automotive ADAS in surround camera architecture
2) Automotive Infotainment End points
3) Pro A/V video wall projection system and
4) Multichannel Sound system for Automotive, Studio Environments.
Ccie R&S lab_k3
This document describes the configuration of routers and switches for a CCIE lab exam. It includes:
- Loopback and VLAN configurations for routers and switches
- Basic configurations for routers R1 through R5 including interfaces and IP addresses
- Switch configurations for SW1 through SW4 including VLANs and trunk/access port settings
- Sample configuration of border gateway protocol (BGP) between the border broadband routers BB1-BB2 and core routers
Excelfore Ethernet AVB Software Architecture on ARM Cortex SOCs (White Paper)
AVB software architecture on ARM Cortex SOCs
Summary: Traditional clocking synchronization in networked A/V systems is done via elaborate means. In the automotive sector, the clock synchronization of displays and multi-channel audio in an infotainment platform is implemented using MOST, which is an isochronous environment. In the Pro-A/V area, the displays are synchronized through a combination of separate master clock control link and fixed delay compensation depending on the length of the control link. Synchronization thus has been a tedious and time consuming exercise. Standard Ethernet does not provide QoS and it is an asynchronous environment, although topologies exist to provide it today.
The Ethernet AVB Protocol (IEEE1722+IEEE1588 or 802.1AS) in one such standard that formally brings a QoS and synchronization implementation to Ethernet. By providing global time synchronization mechanism combined with a protocol of prioritization of streams as they pass through switches, Ethernet AVB offers an Isochronous environment similar to that of the MOST bus. Ethernet AVB protocol allows widespread proliferation of Ethernet standard in Automotive, Pro-AV and Pro-Audio systems.
Examples of Ethernet AVB application are:
1) Automotive ADAS in surround camera architecture
2) Automotive Infotainment End points
3) Pro A/V video wall projection system and
4) Multichannel Sound system for Automotive, Studio Environments.
Eigrp
EIGRP is a Cisco proprietary routing protocol based on IGRP but with enhancements to allow it to scale to large enterprise networks. The article demonstrates configuring EIGRP routing between four routers, including setting hostnames, IP addresses for fast ethernet and serial interfaces on each router to establish connectivity between the networks.
ClearPass 6.3.6 Release Notes
This document provides release notes for ClearPass 6.3.6, including information about supported browsers and system requirements, upgrade and update instructions, new features, issues resolved, and known issues. Key details include supported ESX/ESXi versions for the virtual appliance, requirements for ClearPass OnGuard and the dissolvable agent, and lists of enhancements and issues addressed in previous 6.3.x releases.
CCNA R&S-10-Implementing Ethernet Virtual LANs
This document discusses Ethernet virtual LANs (VLANs). It begins by explaining that VLANs allow a switch to separate interfaces into different broadcast domains, even though they are connected to the same physical switch. It then covers VLAN configuration, including creating VLANs, assigning access ports, and VLAN trunking protocols. It describes how VLAN trunking allows multiple VLANs to cross a single link between switches using tagging. Finally, it discusses routing between VLANs using routers or layer 3 switches.
Deploying SIP Trunks with Cisco Unified Border Element (CUBE/vCUBE) Enterprise
This session will provide an in-depth understanding on how to design and implement SIP Trunks with Cisco's Enterprise SBC and Cisco Unified Border Element (CUBE/vCUBE). It will familiarize the participant with CUBE architecture, deployment options, and sizing guidelines. Differences between various CUBE and vCUBE platform options will also be discussed along with certain key elements of CUBE/vCUBE like Interworking, Media Manipulation, SIP Normalization, Simplified Call Routing, Call Recording using SIPREC, Multi-tenancy and High Availability.
Audinate avb white paper v1.2
The document discusses emerging Audio Video Bridging (AVB) standards and how they fit within Audinate's existing Dante media networking solution. It provides an overview of key networking concepts like quality of service, clock synchronization, and resource reservation. It then examines the IEEE 802.1 AVB standards for clock synchronization, traffic shaping, resource reservation, and robustness. It explains how Dante is designed to leverage these standards and ensure compatibility as AVB is adopted. Dante offers tight synchronization, low latency transport, and a migration path to future-proof systems as AVB becomes more widely deployed.
pravesh_kumar
Pravesh Kumar is a VLSI verification engineer with over 2 years of experience in ASIC design and verification. He has worked on various projects involving AMBA protocols, coverage-driven verification, SystemVerilog, and UVM. His skills include Verilog, SystemVerilog, UVM methodology, functional coverage, and debugging. He holds a Bachelor of Technology degree in Electronics and Communication.
Indicaciones nota 4
The document discusses the configuration of VLANs on switches and subinterfaces on routers to support both IPv4 and IPv6 routing. VLANs allow logical separation of IP networks on a single physical switch. Subinterfaces on routers assign unique IP addresses, subnets, and VLAN associations to support multiple logical networks on a single physical interface. Example configurations are provided for switches to assign ports to VLANs 10, 20 and 30 and for routers to configure subinterfaces with IPv4 and IPv6 addresses for VLANs 10, 20, 30 using RIP and RIPng routing protocols.
Airwave 7.7.9 Release Notes
This release of AirWave includes the following new features and updates:
1) It provides instant configuration of Aruba Instant devices directly through the AirWave interface. It also supports zero-touch provisioning of Mobility Access Switches using Aruba Activate.
2) All charts have been updated to use Highcharts, allowing viewing on mobile devices. New options have been added for customizing charts.
3) A new firewall visibility dashboard allows viewing mobile app usage and performance trends across a network.
4) Support for Adaptive Radio Management version 3.0 is included, providing client health information and matching event details to optimize wireless networks.
CCNA R&S-11-Troubleshooting Ethernet LANs
This document provides an overview of troubleshooting Ethernet LANs. It discusses perspectives on network verification and troubleshooting processes. It also covers analyzing LAN topology using Cisco Discovery Protocol, analyzing switch interface status including speed and duplex issues, predicting frame forwarding using MAC address tables, and analyzing VLANs and VLAN trunks.
Marvell SR-IOV Improves Server Virtualization Performance
Marvell FastLinQ 3400/8400 Series Adapters Enhance I/O Throughput and Reduce Processor Utilization
SR-IOV alleviates bottlenecks in virtual operating systems and enables “bare-metal” performance of virtualized resources.
Aos & cppm integration & testing document for eap tls & eap peap
The document discusses the configuration and testing of EAP-TLS and EAP-PEAP authentication between an Aruba controller and CPPM authentication server. It provides step-by-step instructions on setting up EAP-TLS and EAP-PEAP when the EAP tunnel is terminated on the CPPM server or Aruba controller. Troubleshooting tips are also included such as ensuring the correct certificates, authentication methods and services are configured on the controller, CPPM and client devices.
Veracity VHW-HWPS-B Data Sheet
Buy the Veracity VHW-HWPS-B at JMAC Supply.
https://www.jmac.com/Veracity_VHW_HWPS_B_p/veracity-vhw-hwps-b.htm?=slideshare
What I do - 2018
This document discusses several technical networking topics including dynamically routed HP 5400R networks using VSF, Alcatel-Lucent OSPF multi-path routing, Avaya IP Office VOIP trunking with Cisco switches, Alcatel-Lucent BGP and OSPF routing labs, Avaya Cajun LAN, Alcatel-Lucent RIPv6 labs, PIM sparse mode, fiber tracing, VOIP jitter analysis, 802.1x security, QoS policy maps, and a customer thanking an Alcatel-Lucent engineer for fixing VLAN issues.
virtio
Virtio is an I/O virtualization framework for Linux that provides an abstraction layer for virtual devices. It standardizes the interface between paravirtualized guest operating systems and hypervisors to improve efficiency and promote code reuse. Virtio defines front-end drivers for the guest and back-end drivers for the hypervisor to communicate. It uses virtual queues and buffer abstractions to encapsulate data and commands exchanged between the guest and hypervisor. Major hypervisors like KVM and Xen support virtio to virtualize network, block, and other device types in a standardized way.
69632 configuring-cat-ip-phone
This document provides instructions for configuring Cisco Catalyst switches to connect Cisco IP phones. It discusses:
1) Configuring switch ports to carry both voice and data traffic on separate VLANs using predefined macros. It also covers configuring inline power, QoS, and verifying the configuration.
2) Troubleshooting issues like phones not receiving power or IP addresses correctly.
3) Background information on Cisco IP phone port connections and how switches prioritize voice traffic using QoS markings to maintain call quality.
Aruba OS 6.4 Command Line Interface Reference Guide
The document provides an overview of new commands, modified commands, and deprecated commands in the ArubaOS 6.4 Command-Line Interface. It also describes how to connect to the controller using the serial port or Telnet/SSH, navigate between different command modes, and get help with commands.
Cisco asa 5515 datasheet
Cisco ASA 5515-X supports Active/Active and Acitve/standby failover to enable the firewall redundancy. It delivers up to 1.2 Gbps stateful inspection throughput, 250 IPsec VPN peers, 250,000 concurrent connections and 1 expansion slot, which makes it ideally suited for the small, mid-size enterprises or branch offices.
2009 AIA Wisconsin Design Awards Entries
The document lists 71 design award entries from the 2009 AIA Wisconsin Design Awards. The entries include various building types and projects such as police stations, healthcare facilities, schools, hotels, and residential buildings from locations across Wisconsin and other states. Each entry lists the project name, location, architect, and photographer.
Home Page Design
The document provides guidelines for effective home page design, including making the site's purpose clear, helping users find needed information, and revealing site content. It analyzes the home page of the Elections Department of Singapore and identifies areas for improvement, such as adding an introduction, using imagery and graphics to educate users and establish trust, and providing relevant information to build credibility. Examples of better home page designs from other elections websites are presented that incorporate things like introductions, interactive media, imagery relating to voting procedures, and graphics to convey information visually.
More Related Content
What's hot
Excelfore releases Full Ethernet AVB Stack for ADAS and Infotainment Endpoint...
AVB software architecture on ARM Cortex SOCs
Summary: Traditional clocking synchronization in networked A/V systems is done via elaborate means. In the automotive sector, the clock synchronization of displays and multi-channel audio in an infotainment platform is implemented using MOST, which is an isochronous environment. In the Pro-A/V area, the displays are synchronized through a combination of separate master clock control link and fixed delay compensation depending on the length of the control link. Synchronization thus has been a tedious and time consuming exercise. Standard Ethernet does not provide QoS and it is an asynchronous environment, although topologies exist to provide it today.
The Ethernet AVB Protocol (IEEE1722+IEEE1588 or 802.1AS) in one such standard that formally brings a QoS and synchronization implementation to Ethernet. By providing global time synchronization mechanism combined with a protocol of prioritization of streams as they pass through switches, Ethernet AVB offers an Isochronous environment similar to that of the MOST bus. Ethernet AVB protocol allows widespread proliferation of Ethernet standard in Automotive, Pro-AV and Pro-Audio systems.
Examples of Ethernet AVB application are:
1) Automotive ADAS in surround camera architecture
2) Automotive Infotainment End points
3) Pro A/V video wall projection system and
4) Multichannel Sound system for Automotive, Studio Environments.
Ccie R&S lab_k3
This document describes the configuration of routers and switches for a CCIE lab exam. It includes:
- Loopback and VLAN configurations for routers and switches
- Basic configurations for routers R1 through R5 including interfaces and IP addresses
- Switch configurations for SW1 through SW4 including VLANs and trunk/access port settings
- Sample configuration of border gateway protocol (BGP) between the border broadband routers BB1-BB2 and core routers
Excelfore Ethernet AVB Software Architecture on ARM Cortex SOCs (White Paper)
AVB software architecture on ARM Cortex SOCs
Summary: Traditional clocking synchronization in networked A/V systems is done via elaborate means. In the automotive sector, the clock synchronization of displays and multi-channel audio in an infotainment platform is implemented using MOST, which is an isochronous environment. In the Pro-A/V area, the displays are synchronized through a combination of separate master clock control link and fixed delay compensation depending on the length of the control link. Synchronization thus has been a tedious and time consuming exercise. Standard Ethernet does not provide QoS and it is an asynchronous environment, although topologies exist to provide it today.
The Ethernet AVB Protocol (IEEE1722+IEEE1588 or 802.1AS) in one such standard that formally brings a QoS and synchronization implementation to Ethernet. By providing global time synchronization mechanism combined with a protocol of prioritization of streams as they pass through switches, Ethernet AVB offers an Isochronous environment similar to that of the MOST bus. Ethernet AVB protocol allows widespread proliferation of Ethernet standard in Automotive, Pro-AV and Pro-Audio systems.
Examples of Ethernet AVB application are:
1) Automotive ADAS in surround camera architecture
2) Automotive Infotainment End points
3) Pro A/V video wall projection system and
4) Multichannel Sound system for Automotive, Studio Environments.
Eigrp
EIGRP is a Cisco proprietary routing protocol based on IGRP but with enhancements to allow it to scale to large enterprise networks. The article demonstrates configuring EIGRP routing between four routers, including setting hostnames, IP addresses for fast ethernet and serial interfaces on each router to establish connectivity between the networks.
ClearPass 6.3.6 Release Notes
This document provides release notes for ClearPass 6.3.6, including information about supported browsers and system requirements, upgrade and update instructions, new features, issues resolved, and known issues. Key details include supported ESX/ESXi versions for the virtual appliance, requirements for ClearPass OnGuard and the dissolvable agent, and lists of enhancements and issues addressed in previous 6.3.x releases.
CCNA R&S-10-Implementing Ethernet Virtual LANs
This document discusses Ethernet virtual LANs (VLANs). It begins by explaining that VLANs allow a switch to separate interfaces into different broadcast domains, even though they are connected to the same physical switch. It then covers VLAN configuration, including creating VLANs, assigning access ports, and VLAN trunking protocols. It describes how VLAN trunking allows multiple VLANs to cross a single link between switches using tagging. Finally, it discusses routing between VLANs using routers or layer 3 switches.
Deploying SIP Trunks with Cisco Unified Border Element (CUBE/vCUBE) Enterprise
This session will provide an in-depth understanding on how to design and implement SIP Trunks with Cisco's Enterprise SBC and Cisco Unified Border Element (CUBE/vCUBE). It will familiarize the participant with CUBE architecture, deployment options, and sizing guidelines. Differences between various CUBE and vCUBE platform options will also be discussed along with certain key elements of CUBE/vCUBE like Interworking, Media Manipulation, SIP Normalization, Simplified Call Routing, Call Recording using SIPREC, Multi-tenancy and High Availability.
Audinate avb white paper v1.2
The document discusses emerging Audio Video Bridging (AVB) standards and how they fit within Audinate's existing Dante media networking solution. It provides an overview of key networking concepts like quality of service, clock synchronization, and resource reservation. It then examines the IEEE 802.1 AVB standards for clock synchronization, traffic shaping, resource reservation, and robustness. It explains how Dante is designed to leverage these standards and ensure compatibility as AVB is adopted. Dante offers tight synchronization, low latency transport, and a migration path to future-proof systems as AVB becomes more widely deployed.
pravesh_kumar
Pravesh Kumar is a VLSI verification engineer with over 2 years of experience in ASIC design and verification. He has worked on various projects involving AMBA protocols, coverage-driven verification, SystemVerilog, and UVM. His skills include Verilog, SystemVerilog, UVM methodology, functional coverage, and debugging. He holds a Bachelor of Technology degree in Electronics and Communication.
Indicaciones nota 4
The document discusses the configuration of VLANs on switches and subinterfaces on routers to support both IPv4 and IPv6 routing. VLANs allow logical separation of IP networks on a single physical switch. Subinterfaces on routers assign unique IP addresses, subnets, and VLAN associations to support multiple logical networks on a single physical interface. Example configurations are provided for switches to assign ports to VLANs 10, 20 and 30 and for routers to configure subinterfaces with IPv4 and IPv6 addresses for VLANs 10, 20, 30 using RIP and RIPng routing protocols.
Airwave 7.7.9 Release Notes
This release of AirWave includes the following new features and updates:
1) It provides instant configuration of Aruba Instant devices directly through the AirWave interface. It also supports zero-touch provisioning of Mobility Access Switches using Aruba Activate.
2) All charts have been updated to use Highcharts, allowing viewing on mobile devices. New options have been added for customizing charts.
3) A new firewall visibility dashboard allows viewing mobile app usage and performance trends across a network.
4) Support for Adaptive Radio Management version 3.0 is included, providing client health information and matching event details to optimize wireless networks.
CCNA R&S-11-Troubleshooting Ethernet LANs
This document provides an overview of troubleshooting Ethernet LANs. It discusses perspectives on network verification and troubleshooting processes. It also covers analyzing LAN topology using Cisco Discovery Protocol, analyzing switch interface status including speed and duplex issues, predicting frame forwarding using MAC address tables, and analyzing VLANs and VLAN trunks.
Marvell SR-IOV Improves Server Virtualization Performance
Marvell FastLinQ 3400/8400 Series Adapters Enhance I/O Throughput and Reduce Processor Utilization
SR-IOV alleviates bottlenecks in virtual operating systems and enables “bare-metal” performance of virtualized resources.
Aos & cppm integration & testing document for eap tls & eap peap
The document discusses the configuration and testing of EAP-TLS and EAP-PEAP authentication between an Aruba controller and CPPM authentication server. It provides step-by-step instructions on setting up EAP-TLS and EAP-PEAP when the EAP tunnel is terminated on the CPPM server or Aruba controller. Troubleshooting tips are also included such as ensuring the correct certificates, authentication methods and services are configured on the controller, CPPM and client devices.
Veracity VHW-HWPS-B Data Sheet
Buy the Veracity VHW-HWPS-B at JMAC Supply.
https://www.jmac.com/Veracity_VHW_HWPS_B_p/veracity-vhw-hwps-b.htm?=slideshare
What I do - 2018
This document discusses several technical networking topics including dynamically routed HP 5400R networks using VSF, Alcatel-Lucent OSPF multi-path routing, Avaya IP Office VOIP trunking with Cisco switches, Alcatel-Lucent BGP and OSPF routing labs, Avaya Cajun LAN, Alcatel-Lucent RIPv6 labs, PIM sparse mode, fiber tracing, VOIP jitter analysis, 802.1x security, QoS policy maps, and a customer thanking an Alcatel-Lucent engineer for fixing VLAN issues.
virtio
Virtio is an I/O virtualization framework for Linux that provides an abstraction layer for virtual devices. It standardizes the interface between paravirtualized guest operating systems and hypervisors to improve efficiency and promote code reuse. Virtio defines front-end drivers for the guest and back-end drivers for the hypervisor to communicate. It uses virtual queues and buffer abstractions to encapsulate data and commands exchanged between the guest and hypervisor. Major hypervisors like KVM and Xen support virtio to virtualize network, block, and other device types in a standardized way.
69632 configuring-cat-ip-phone
This document provides instructions for configuring Cisco Catalyst switches to connect Cisco IP phones. It discusses:
1) Configuring switch ports to carry both voice and data traffic on separate VLANs using predefined macros. It also covers configuring inline power, QoS, and verifying the configuration.
2) Troubleshooting issues like phones not receiving power or IP addresses correctly.
3) Background information on Cisco IP phone port connections and how switches prioritize voice traffic using QoS markings to maintain call quality.
Aruba OS 6.4 Command Line Interface Reference Guide
The document provides an overview of new commands, modified commands, and deprecated commands in the ArubaOS 6.4 Command-Line Interface. It also describes how to connect to the controller using the serial port or Telnet/SSH, navigate between different command modes, and get help with commands.
Cisco asa 5515 datasheet
Cisco ASA 5515-X supports Active/Active and Acitve/standby failover to enable the firewall redundancy. It delivers up to 1.2 Gbps stateful inspection throughput, 250 IPsec VPN peers, 250,000 concurrent connections and 1 expansion slot, which makes it ideally suited for the small, mid-size enterprises or branch offices.
What's hot (20)
Excelfore releases Full Ethernet AVB Stack for ADAS and Infotainment Endpoint...
Excelfore releases Full Ethernet AVB Stack for ADAS and Infotainment Endpoint...
Excelfore Ethernet AVB Software Architecture on ARM Cortex SOCs (White Paper)
Excelfore Ethernet AVB Software Architecture on ARM Cortex SOCs (White Paper)
Deploying SIP Trunks with Cisco Unified Border Element (CUBE/vCUBE) Enterprise
Deploying SIP Trunks with Cisco Unified Border Element (CUBE/vCUBE) Enterprise
Marvell SR-IOV Improves Server Virtualization Performance
Marvell SR-IOV Improves Server Virtualization Performance
Aos & cppm integration & testing document for eap tls & eap peap
Aos & cppm integration & testing document for eap tls & eap peap
Aruba OS 6.4 Command Line Interface Reference Guide
Aruba OS 6.4 Command Line Interface Reference Guide
Viewers also liked
2009 AIA Wisconsin Design Awards Entries
The document lists 71 design award entries from the 2009 AIA Wisconsin Design Awards. The entries include various building types and projects such as police stations, healthcare facilities, schools, hotels, and residential buildings from locations across Wisconsin and other states. Each entry lists the project name, location, architect, and photographer.
Home Page Design
The document provides guidelines for effective home page design, including making the site's purpose clear, helping users find needed information, and revealing site content. It analyzes the home page of the Elections Department of Singapore and identifies areas for improvement, such as adding an introduction, using imagery and graphics to educate users and establish trust, and providing relevant information to build credibility. Examples of better home page designs from other elections websites are presented that incorporate things like introductions, interactive media, imagery relating to voting procedures, and graphics to convey information visually.
A vida de jesus
La Unión Europea ha propuesto un nuevo paquete de sanciones contra Rusia que incluye un embargo al petróleo. El embargo prohibiría la importación de petróleo ruso a la UE y también impediría el acceso de buques rusos a puertos europeos. Sin embargo, Hungría se opone firmemente al embargo al petróleo, argumentando que su economía depende en gran medida de las importaciones de energía rusa.
Shadow IT Risk and Reward
This document discusses shadow IT and provides recommendations for how enterprise IT can embrace it. It defines shadow IT as solutions developed without enterprise IT oversight and explains why teams turn to it for freedom, ownership, and ego. Trends like externalization, consumerization, and democratization of technology are driving its growth. The document recommends that enterprise IT address barriers preventing shadow IT from adopting standards, extend solutions to shadow IT teams, and merge policies with their environments to bridge the divide between the two.
AIESEC EE_MT internship in MarkIT_for Denmark, Sweden, Norway
This document provides information about an internship opportunity with MarkIT, an IT services company based in Estonia. The internship involves assisting country managers remotely by taking care of backoffice work like communication, accounting, and logistics support across multiple European countries. The ideal candidate will have a business or marketing background, be fluent in English with good Danish, Norwegian or Swedish, and have strong client service, marketing, and leadership skills. The internship duration is from June 10, 2009 to May 8, 2011 with a monthly salary of 680 USD.
L9 Machinic Assemblages
CRITICAL THEORY / PHILOSOPHY OF TECHNOLOGY Guattari extends the concept of the machine beyond its usual sense to see all the diverse forces that produce a technical object as themselves machinic. This difficult but rewarding reading begins by referring to a number of philosophical readings of technology, and progresses to develop an extended definition of the machine.
Guattari, Felix (1995) “Machinic Heterogenesis” in Chaosmosis: an ethico-aesthetic paradigm Sydney:Power, pp 33-57.
Web 2.0 presentation
Networlding introduces some key Web 2.0 tools and terms like blogs, podcasts, RSS, and wikis. It also lists several blog hosting sites and provides additional resources for blogs and articles. The document aims to inform readers about popular Web 2.0 technologies and resources.
הגדרת נתבי סיסקו 1.0
This document contains configurations for Cisco routers, including:
1. Interface configurations for E1 and serial interfaces with descriptions and multilink PPP settings.
2. Site-to-site VPN and Easy VPN configurations using IPSec.
3. Control plane policies to limit traffic like Telnet, SNMP, and ICMP.
4. Other settings like IP aliases, QoS, time ranges, route maps, NTP, TACACS, RADIUS, DHCP, and ISDN.
Slides MES6 Plenary Jf Matos Slideshare
The document discusses perspectives on critical mathematics education from participants at the 6th Mathematics Education and Society Conference. It provides over 30 quotes from participants that define or describe critical mathematics education and mainstream mathematics education. The quotes touch on focusing on social issues, empowerment, critique of society, and using math to understand injustice.
Social Desperation in a Fickle Society
Social media engagement in India has become desperate as brands try numerous engagement tactics to attract users. In 2011, the year that saw the rise of Anna Hazare's anti-corruption movement on social media, Airtel spent 300 crores on rebranding but got no results. Brands want high engagement from every campaign but end up resorting to desperate measures like paying for interactions or overpromising giveaways. True engagement comes from relating campaigns to the brand through authentic and transparent communication. Success in social media also requires some failure as outcomes cannot always be controlled.
Buffalo: The Provincial as Providential (Pt. 2)
The Albright-Knox Art Gallery has a long history dating back to 1862, with significant additions and acquisitions over time that have transformed its collection focus. Notable acquisitions include works by Picasso, Gauguin, and Jasper Johns. In 1962, a new wing designed by Gordon Bunshaft opened, changing the institutional name and refocusing its mission on contemporary art. However, in recent decades some works were auctioned to support this contemporary focus, generating controversy.
Pickme - Finding the Initial Team
This document outlines challenges faced by a startup including immediate recruitment of the right talent, shifting from a conventional to startup culture, miscommunications due to fast growth, and reluctance to let things go. It also lists experiences in firefighting, taxi industry, call center, content and PR, and as a techie and scrum master. Finally, it lists desirable attitudes for the startup such as being smart, experienced, pivotable, confident, positive, and committed.
UX Proposal
This is about as direct and simple as it can be: breaking down the web experience into 4 steps. Here we make quite a transition for "info" to "communication": a significant re-languaging. Part of a branding proposal.
Dance Image Review
The document appears to be a series of questions and links related to different time periods of dance, including Renaissance, Baroque, Golden Age of Ballet (Romanticism), and Modern Dance/Ballet. The questions prompt the reader to examine images at different URLs and determine which historical time period the dances or costumes in the images best represent.
Business plan-startup
This document provides a template for a business plan, including an executive summary, company description, products/services, marketing plan, operations plan, management overview, financial statements, expenses/capitalization, financial plan, and appendices. The business plan template guides the user through various sections to help research and develop their business idea in a systematic way. The document emphasizes that the process of creating a business plan is valuable for avoiding costly mistakes even if the written plan itself is not perfect.
Search and Social Collide and Merge : Collision Course
This document discusses the merging of search and social media and the implications for marketers. It notes that Google has integrated search results with a user's Google+ social network. This increases the importance of building a strong brand community and engaging customers on social media. It also means marketers have less time to make a good first impression with users as search results become more personalized based on social connections and preferences.
Nevada Wilderness Project, Nevada Interactive Media Summit
The Nevada Wilderness Project works to conserve wildlife habitat, preserve wilderness areas, and promote sustainable renewable energy development. They plan to create social media pages and a website section about an upcoming event called the SWIP Trip to engage audiences and share information about their work.
Viewers also liked (20)
AIESEC EE_MT internship in MarkIT_for Denmark, Sweden, Norway
AIESEC EE_MT internship in MarkIT_for Denmark, Sweden, Norway
Search and Social Collide and Merge : Collision Course
Search and Social Collide and Merge : Collision Course
Nevada Wilderness Project, Nevada Interactive Media Summit
Nevada Wilderness Project, Nevada Interactive Media Summit
Similar to Kendel Avaya-Fabric connect - Demo Lab Guide – L3VSN & Multicast-8
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment Bangladesh Network Operators Group
The L2 NID based architecture for vCPE/NFV deployments faces several challenges:
1) It can cause MAC address scale issues in the NFV data center switching infrastructure as thousands of customer MAC addresses may need to be learned.
2) It extends customer layer 2 domains to the NFV data center, increasing security risks from misconfigured customer networks.
3) There is a potential risk of layer 2 loops occurring between customer networks and the service provider infrastructure without proper demarcation and loop prevention.
4) Achieving high availability between redundant vCPE instances requires reliable tracking of the connectivity between the L2 NID and vCPE, which adds complexity.Vxlan control plane and routing
This document provides an overview and configuration guide for VxLAN routing and control plane capabilities on Nexus 9000 series switches. It begins with an introduction to VxLAN and MP-BGP EVPN technologies. It then covers MP-BGP EVPN control plane functions and design options for VXLAN deployment. The document concludes with instructions for configuring MP-BGP EVPN VXLAN on Nexus 9000 switches and an overview of their VxLAN capabilities.
PLNOG 13: Emil Gągała: EVPN – rozwiązanie nie tylko dla Data Center
Ethernet VPN (EVPN) is a new standards-based protocol that interconnects Layer 2 domains over a shared IP/MPLS network. It improves on previous protocols like VPLS by supporting features like all-active multi-homing and control plane learning of MAC addresses. EVPN is ideally suited for datacenter interconnectivity but can also be used in other cases beyond just data centers. Major networking vendors support EVPN as shown by their participation in the relevant IETF working group.
NFV SDN Summit March 2014 D1 07 kireeti_kompella Native MPLS Fabric
This document proposes using MPLS as a native underlay fabric for data centers and access networks. It argues that MPLS has robust control and data planes but that its provisioning has been too complex. The document introduces Labeled ARP (L-ARP) as a way to make MPLS plug-and-play at the host level. L-ARP allows hosts to dynamically learn MPLS labels for other hosts, mimicking traditional ARP. This allows MPLS to be used seamlessly as an underlay without complex provisioning while gaining features like load balancing and traffic engineering. Use cases demonstrated include data center interconnects and VRF/EVPN overlays. The conclusion is that proliferating encapsulations hurts standardization while MPLS
PLNOG 8: Gaweł Mikołajczyk - Securing the Cloud Infrastructure - from Hyperv...
This document discusses securing cloud infrastructure from the hypervisor to the edge. It covers three dimensions: security for cloud infrastructure, security for cloud access, and commercial cloud security services. It provides examples of implementing security controls at different layers, including at the virtual access layer, hypervisor layer, and cloud edge. Virtual security appliances and segmentation techniques are also described.
PLNOG16: Automatyzacja kreaowania usług operatorskich w separacji od rodzaju ...
PLNOG16: Automatyzacja kreaowania usług operatorskich w separacji od rodzaju urządzeń - Network Services Orchestration, Krzysztof Konkowski
PLNOG16: Kreowanie usług przez operatorów – SP IWAN, Krzysztof Konkowski
The document discusses an SP-IWAN (Service Provider Intelligent WAN) architecture that can be offered by network operators. It proposes separating the transport and service layers, using DMVPN as an overlay and allowing applications to flow freely between MPLS and internet links using PfR. It also discusses using virtual network functions and orchestration to automate service provisioning and deliver application-aware services like monitoring, optimization and security. The architecture is meant to help operators deliver new cloud services, optimize application performance across networks and generate new revenue streams.
DEVNET-1155 Branch Virtualization
The session covers how Network Function Virtualization and cloud based management is impacting the branch environment. The session covers the basics of NFV and then drill down into how network functions virtualization is changing the branch landscape and some of the special challenges involved in building highly resilient virtualized branch infrastructure and its linkage back to virtualization in the data centre. The session ends with a demonstration of Cisco’s vbranch solution.
Operationalizing VRF in the Data Center
VRF (Virtual Routing and Forwarding) provides logical isolation of routing domains within a physical network. The document discusses VRF support in Linux kernels and Cumulus Linux. It provides examples of VRF configuration and management, including interface assignment, routing protocols, and troubleshooting tools. VRF allows multiple routing instances to operate on the same physical router or switch for improved network segmentation and security.
[Cisco Connect 2018 - Vietnam] Anh duc le reap the benefits of sdn with cisco...
Cisco's Application Centric Infrastructure (ACI) provides automated provisioning and policy-based abstraction of networking and security services. The Cisco Application Virtual Switch (AVS) extends ACI's capabilities to hypervisors by providing:
1) Automated mapping of Endpoint Groups (EPGs) to port groups on the virtual distributed switch for tighter integration with the ACI controller.
2) Dynamic allocation of VLANs between virtual servers and leaf switches maintained by ACI, removing the need for manual VLAN numbering.
3) Migration and investment protection capabilities when upgrading hypervisors, as well as simplified blade switch deployments and centralized virtual network operations.
Base Designs Lab Setup for Validated Reference Design
The document describes the setup of a sample campus network that is used to demonstrate Aruba's Validated Reference Design. It includes:
1) A data center with two master controllers in hot standby redundancy, connected to core switches.
2) Two distribution switches connected to the core switches and to local controllers, with OSPF routing enabled between core and distribution layers.
3) Two local controllers in an active-active redundancy configuration using VRRP, connected to the distribution switches and providing connectivity to the access layer.
10.) vxlan
The Secret Sauce is the Control Plane, not the Encapsulation
Host Route Distribution decoupled from the Underlay protocol
Use MultiProtocol-BGP (MP-BGP) on the Leaf nodes to distribute internal Host/Subnet Routes and external reachability information
Route-Reflectors deployed for scaling purposes
VXLAN terminates its tunnels on VTEPs (Virtual Tunnel End Point).
Each VTEP has two interfaces, one is to provide bridging function for local hosts, the other has an IP identification in the core network for VXLAN encapsulation/decapsulation.
VXLAN Encapsulation and De-encapsulation occur on T2
Bridging and Gateway are independent of the port type (1/10/40G ports)
Encapsulation happens on the egress port
Decapsulation happens on the ingress port
Service Oriented Architecture
2 or 3 layer network to Leaf & Spine
High density and bandwidth required
Layer 3 ECMP
No oversubscription
Low and uniform delay characteristic
Wire & configure once network
Uniform network configuration
Workload Mobility
Workload Placement
Segmentation
Scale
Automation & Programmability
L2 + L3 Connectivity
Physical + Virtual
Open
Mondaygeneralhankinsvpn2 140605100226-phpapp01 (1)
The document discusses Ethernet VPN (EVPN) which introduces a new control plane approach for delivery of Ethernet services using MP-BGP. EVPN provides benefits like integrated Layer 2 and Layer 3 services, network efficiency, design flexibility, and greater network control. It describes key EVPN operations like all-active multihoming, split horizon, proxy ARP/ND, MAC mobility, and default gateway inter-subnet forwarding. EVPN can use different data plane encapsulations including MPLS, PBB, and VXLAN. It provides an overview of EVPN status and specifications being standardized in the IETF.
Intrdouction to VRF Implementation.pdf
Virtual routing and forwarding (VRF) allows a single router to maintain multiple independent routing tables. It creates virtual routers within a physical router by isolating interfaces, routing tables, and forwarding tables for each VRF. This allows for overlapping IP addresses between VRFs. Configuring VRFs increases network security and segmentation without requiring encryption between instances.
MPLS L3 VPN Tutorial, by Nurul Islam Roman [APNIC 38]
This document discusses deploying MPLS L3VPN. It begins with an overview of MPLS and VPN terminology. It then covers the MPLS reference architecture and different node types. It describes how IP/VPN technologies use separate routing tables at provider edge (PE) routers to provide independent virtual routing and forwarding (VRF) instances for each VPN customer. The control plane uses multiprotocol BGP (MP-BGP) to distribute VPN routes between PE routers using route distinguisher (RD), route target (RT), and labels. The forwarding plane uses these labels to encapsulate and transport customer IP packets across the MPLS core. The document then discusses various IP/VPN services including load sharing, hub-and-spoke
Openstack v4 0
The document discusses network function virtualization and how 6WIND's Virtual Accelerator solution addresses performance bottlenecks in virtualized network environments. It provides high-speed networking and packet processing capabilities independent of the underlying Linux kernel. This improves throughput for east-west traffic between virtual network functions and north-south traffic, allowing for higher VM and VNF densities. It also enables appliance-based network functions to be virtualized without performance limitations.
Capacitacion 2018
This document discusses routing protocols and concepts. It covers IOS, IOS XE, and IOS XR platforms commonly used in networks. ISRs running IOS or IOS XE are typically used at the customer premises edge and border, while ASRs running IOS XR are used in the core and aggregation layers. The training focuses on IOS and IOS XE platforms. OSPF and BGP routing protocols are explained, including router IDs, metrics, link state databases, and attributes. DHCP and NAT services are also covered.
Cisco SDN/NVF Innovations (SDN NVF Day ITB 2016)
The document discusses Cisco's innovations in software-defined networking (SDN) and network functions virtualization (NFV). It provides an overview of Cisco's strategy, which involves various models of programmability including classic SDN with OpenFlow, network virtualization with overlays, and hybrid approaches. The document also discusses Cisco's NFV reference architecture and innovations like the Virtualized Mobility Supervisor (vMS) and virtualized branch solutions.
Network Function Virtualisation (NFV) BoF
The document outlines topics to be discussed at an NFV BOF meeting at APRICOT 2015, including advanced NFV topics like data plane connectivity models for VNFs, overlay encapsulation for MPLS operators, NFV service assurance, service chaining, and the applicability of Linux containers. It also includes basics like an NFV introduction. The organizer seeks active participation from attendees on these and other topics.
Similar to Kendel Avaya-Fabric connect - Demo Lab Guide – L3VSN & Multicast-8 (20)
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment
Challenges of L2 NID Based Architecture for vCPE and NFV Deployment
PLNOG 13: Emil Gągała: EVPN – rozwiązanie nie tylko dla Data Center
PLNOG 13: Emil Gągała: EVPN – rozwiązanie nie tylko dla Data Center
NFV SDN Summit March 2014 D1 07 kireeti_kompella Native MPLS Fabric
NFV SDN Summit March 2014 D1 07 kireeti_kompella Native MPLS Fabric
PLNOG 8: Gaweł Mikołajczyk - Securing the Cloud Infrastructure - from Hyperv...
PLNOG 8: Gaweł Mikołajczyk - Securing the Cloud Infrastructure - from Hyperv...
PLNOG16: Automatyzacja kreaowania usług operatorskich w separacji od rodzaju ...
PLNOG16: Automatyzacja kreaowania usług operatorskich w separacji od rodzaju ...
PLNOG16: Kreowanie usług przez operatorów – SP IWAN, Krzysztof Konkowski
PLNOG16: Kreowanie usług przez operatorów – SP IWAN, Krzysztof Konkowski
[Cisco Connect 2018 - Vietnam] Anh duc le reap the benefits of sdn with cisco...
[Cisco Connect 2018 - Vietnam] Anh duc le reap the benefits of sdn with cisco...
Base Designs Lab Setup for Validated Reference Design
Base Designs Lab Setup for Validated Reference Design
Mondaygeneralhankinsvpn2 140605100226-phpapp01 (1)
Mondaygeneralhankinsvpn2 140605100226-phpapp01 (1)
MPLS L3 VPN Tutorial, by Nurul Islam Roman [APNIC 38]
MPLS L3 VPN Tutorial, by Nurul Islam Roman [APNIC 38]
More from ELI KENDEL אלי קנדל
הגדרת משפחת Nexus סיסקו 20.2.2011
1. The document discusses configuring a Cisco Nexus 7000 switch, including defining virtual device contexts (VDCs), upgrading firmware, configuring management and console ports, and configuring Overlay Transport Virtualization (OTV) to connect datacenters over a layer 3 core.
2. It also provides examples of configuring Cisco Nexus 5000 switches to connect to Nexus 2000 fabric extenders and configure virtual port channels (VPCs) to connect two Nexus 5000 switches to act as a single virtual switch.
3. The configuration examples discuss features like FHRP isolation, MAC access control lists, and peer links to implement active-active protocols across datacenters using OTV.
Configure Switch Nortel 8600
1. The document provides instructions for upgrading the image on an 8600 switch, including copying new image and configuration files from a server, formatting the flash memory, and rebooting the switch with the new image.
2. It then lists configurations for various protocols and features including OSPF, MLT, Spanning Tree, DHCP Relay, port mirroring, NTP, Radius, VRRP, MAC security, broadcast/multicast rate limiting, static routes, ATM PVCs with VLAN mapping, and RIP.
3. The document finishes with configurations for access policies, syslog server, port tagging, and global port settings.
Networking Technoloy
The document lists various technology products across different categories such as VPNs, firewalls, routers, switches, load balancers, mail security, web application firewalls, database firewalls, and antivirus software. For each category, relevant vendors are named including Cisco, Juniper, Fortinet, Check Point, Microsoft, Nortel, Palo Alto, F5, Imperva, Bluecoat, Symantec, and more. The document serves as a reference sheet for various IT security tools.
More from ELI KENDEL אלי קנדל (10)
Recently uploaded
Mind map of terminologies used in context of Generative AI
Mind map of common terms used in context of Generative AI.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Join us to introduce Milvus Lite, a vector database that can run on notebooks and laptops, share the same API with Milvus, and integrate with every popular GenAI framework. This webinar is perfect for developers seeking easy-to-use, well-integrated vector databases for their GenAI apps.
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...Edge AI and Vision Alliance
For the full video of this presentation, please visit: https://www.edge-ai-vision.com/2024/06/building-and-scaling-ai-applications-with-the-nx-ai-manager-a-presentation-from-network-optix/
Robin van Emden, Senior Director of Data Science at Network Optix, presents the “Building and Scaling AI Applications with the Nx AI Manager,” tutorial at the May 2024 Embedded Vision Summit.
In this presentation, van Emden covers the basics of scaling edge AI solutions using the Nx tool kit. He emphasizes the process of developing AI models and deploying them globally. He also showcases the conversion of AI models and the creation of effective edge AI pipelines, with a focus on pre-processing, model conversion, selecting the appropriate inference engine for the target hardware and post-processing.
van Emden shows how Nx can simplify the developer’s life and facilitate a rapid transition from concept to production-ready applications.He provides valuable insights into developing scalable and efficient edge AI solutions, with a strong focus on practical implementation.Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
ABSTRACT: A prima vista, un mattoncino Lego e la backdoor XZ potrebbero avere in comune il fatto di essere entrambi blocchi di costruzione, o dipendenze di progetti creativi e software. La realtà è che un mattoncino Lego e il caso della backdoor XZ hanno molto di più di tutto ciò in comune.
Partecipate alla presentazione per immergervi in una storia di interoperabilità, standard e formati aperti, per poi discutere del ruolo importante che i contributori hanno in una comunità open source sostenibile.
BIO: Sostenitrice del software libero e dei formati standard e aperti. È stata un membro attivo dei progetti Fedora e openSUSE e ha co-fondato l'Associazione LibreItalia dove è stata coinvolta in diversi eventi, migrazioni e formazione relativi a LibreOffice. In precedenza ha lavorato a migrazioni e corsi di formazione su LibreOffice per diverse amministrazioni pubbliche e privati. Da gennaio 2020 lavora in SUSE come Software Release Engineer per Uyuni e SUSE Manager e quando non segue la sua passione per i computer e per Geeko coltiva la sua curiosità per l'astronomia (da cui deriva il suo nickname deneb_alpha).
20 Comprehensive Checklist of Designing and Developing a Website
Dive into the world of Website Designing and Developing with Pixlogix! Looking to create a stunning online presence? Look no further! Our comprehensive checklist covers everything you need to know to craft a website that stands out. From user-friendly design to seamless functionality, we've got you covered. Don't miss out on this invaluable resource! Check out our checklist now at Pixlogix and start your journey towards a captivating online presence today.
Securing your Kubernetes cluster_ a step-by-step guide to success !
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Climate Impact of Software Testing at Nordic Testing Days
My slides at Nordic Testing Days 6.6.2024
Climate impact / sustainability of software testing discussed on the talk. ICT and testing must carry their part of global responsibility to help with the climat warming. We can minimize the carbon footprint but we can also have a carbon handprint, a positive impact on the climate. Quality characteristics can be added with sustainability, and then measured continuously. Test environments can be used less, and in smaller scale and on demand. Test techniques can be used in optimizing or minimizing number of tests. Test automation can be used to speed up testing.
Full-RAG: A modern architecture for hyper-personalization
Mike Del Balso, CEO & Co-Founder at Tecton, presents "Full RAG," a novel approach to AI recommendation systems, aiming to push beyond the limitations of traditional models through a deep integration of contextual insights and real-time data, leveraging the Retrieval-Augmented Generation architecture. This talk will outline Full RAG's potential to significantly enhance personalization, address engineering challenges such as data management and model training, and introduce data enrichment with reranking as a key solution. Attendees will gain crucial insights into the importance of hyperpersonalization in AI, the capabilities of Full RAG for advanced personalization, and strategies for managing complex data integrations for deploying cutting-edge AI solutions.
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
As the digital landscape continually evolves, operating systems play a critical role in shaping user experiences and productivity. The launch of Nitrux Linux 3.5.0 marks a significant milestone, offering a robust alternative to traditional systems such as Windows 11. This article delves into the essence of Nitrux Linux 3.5.0, exploring its unique features, advantages, and how it stands as a compelling choice for both casual users and tech enthusiasts.
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Maruthi Prithivirajan, Head of ASEAN & IN Solution Architecture, Neo4j
Get an inside look at the latest Neo4j innovations that enable relationship-driven intelligence at scale. Learn more about the newest cloud integrations and product enhancements that make Neo4j an essential choice for developers building apps with interconnected data and generative AI.
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications.
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AIVladimir Iglovikov, Ph.D.
Presented by Vladimir Iglovikov:
- https://www.linkedin.com/in/iglovikov/
- https://x.com/viglovikov
- https://www.instagram.com/ternaus/
This presentation delves into the journey of Albumentations.ai, a highly successful open-source library for data augmentation.
Created out of a necessity for superior performance in Kaggle competitions, Albumentations has grown to become a widely used tool among data scientists and machine learning practitioners.
This case study covers various aspects, including:
People: The contributors and community that have supported Albumentations.
Metrics: The success indicators such as downloads, daily active users, GitHub stars, and financial contributions.
Challenges: The hurdles in monetizing open-source projects and measuring user engagement.
Development Practices: Best practices for creating, maintaining, and scaling open-source libraries, including code hygiene, CI/CD, and fast iteration.
Community Building: Strategies for making adoption easy, iterating quickly, and fostering a vibrant, engaged community.
Marketing: Both online and offline marketing tactics, focusing on real, impactful interactions and collaborations.
Mental Health: Maintaining balance and not feeling pressured by user demands.
Key insights include the importance of automation, making the adoption process seamless, and leveraging offline interactions for marketing. The presentation also emphasizes the need for continuous small improvements and building a friendly, inclusive community that contributes to the project's growth.
Vladimir Iglovikov brings his extensive experience as a Kaggle Grandmaster, ex-Staff ML Engineer at Lyft, sharing valuable lessons and practical advice for anyone looking to enhance the adoption of their open-source projects.
Explore more about Albumentations and join the community at:
GitHub: https://github.com/albumentations-team/albumentations
Website: https://albumentations.ai/
LinkedIn: https://www.linkedin.com/company/100504475
Twitter: https://x.com/albumentationsA tale of scale & speed: How the US Navy is enabling software delivery from l...
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Communications Mining Series - Zero to Hero - Session 1
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
20240607 QFM018 Elixir Reading List May 2024
Everything I found interesting about the Elixir programming ecosystem in May 2024
Pushing the limits of ePRTC: 100ns holdover for 100 days
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Recently uploaded (20)
Mind map of terminologies used in context of Generative AI
Mind map of terminologies used in context of Generative AI
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
Introducing Milvus Lite: Easy-to-Install, Easy-to-Use vector database for you...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
“Building and Scaling AI Applications with the Nx AI Manager,” a Presentation...
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
Cosa hanno in comune un mattoncino Lego e la backdoor XZ?
20 Comprehensive Checklist of Designing and Developing a Website
20 Comprehensive Checklist of Designing and Developing a Website
Securing your Kubernetes cluster_ a step-by-step guide to success !
Securing your Kubernetes cluster_ a step-by-step guide to success !
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024
Climate Impact of Software Testing at Nordic Testing Days
Climate Impact of Software Testing at Nordic Testing Days
Full-RAG: A modern architecture for hyper-personalization
Full-RAG: A modern architecture for hyper-personalization
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
Goodbye Windows 11: Make Way for Nitrux Linux 3.5.0!
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
GraphSummit Singapore | Neo4j Product Vision & Roadmap - Q2 2024
Large Language Model (LLM) and it’s Geospatial Applications
Large Language Model (LLM) and it’s Geospatial Applications
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
Enchancing adoption of Open Source Libraries. A case study on Albumentations.AI
A tale of scale & speed: How the US Navy is enabling software delivery from l...
A tale of scale & speed: How the US Navy is enabling software delivery from l...
Communications Mining Series - Zero to Hero - Session 1
Communications Mining Series - Zero to Hero - Session 1
Pushing the limits of ePRTC: 100ns holdover for 100 days
Pushing the limits of ePRTC: 100ns holdover for 100 days
Kendel Avaya-Fabric connect - Demo Lab Guide – L3VSN & Multicast-8
- 1. Demo Lab Guide – L3VSN & Multicast Eli Kendel Corporate Consulting Engineer, Enterprise Business Solutions & SDN Fx WW Sales ACE-Fx # 18 , CCIE-DC # 48279 Ekendel@avaya.com
- 2. © 2012 Avaya Inc. All rights reserved. 2 L3 VSNs If you need a dedicated IP routing instance (in a VRF) to keep application separate from other applications on the same network
- 3. © 2012 Avaya Inc. All rights reserved. 33 ip vrf blue vrfid 1 vlan create 200 type port-mstprstp 0 vlan members add 200 1/20 interface vlan 200 vrf blue ip address 10.1.1.1/24 exit router vrf blue ip ecmp ipvpn i-sid 30001 ipvpn enable isis redistribute direct isis redistribute direct enable exit isis apply redistribute direct vrf blue Creating a virtualized L3VSN IP routing on a VRF Enabling ECMP is optional, but it is necessary for the L3VSN to leverage SPB’s equal cost paths
- 4. © 2012 Avaya Inc. All rights reserved. 4 Checking a virtualized L3VSN IP routing on a VRF show ip vrf show ip ipvpn show ip route vrf <vrf-name> show isis spbm ip-unicast-fib id <L3vsn-isid> l2 ping ip-address <ip-addr-or-subnet> vrf <vrf-name> l2 traceroute ip-address <ip-addr-or-subnet> vrf <vrf-name>
- 5. © 2012 Avaya Inc. All rights reserved. 55 Enabling a L3VSN for IP Multicast IP multicast routing on a VRF By default Avaya switches use IGMPv2 router isis spbm 1 multicast enable exit router vrf <vrf-name> mvpn enable exit interface vlan <vlan-id> ip spb-multicast enable ip igmp immediate-leave [ip igmp version <1-3>] exit
- 6. © 2012 Avaya Inc. All rights reserved. 6 Checking a L3VSN for IP Multicast IP multicast routing on a VRF show ip igmp interface vrf <vrf-name> show ip igmp sender vrf <vrf-name> show ip igmp group vrf <vrf-name> show isis spb-mcast-summary show isis spbm ip-multicast-route vrf <vrf-name> show isis spbm ip-multicast-route vrf <vrf-name> detail l2 tracemroute source <src-ip> group <grp-ip> vrf <vrf-name>