This document describes an authenticated locker system using password protection that is designed using an Arduino kit. The system uses a password entered on a 4x4 keypad to control a servo motor that opens and closes a door. If the correct password is entered, the door will open for 30 seconds before closing. If an incorrect password is entered multiple times, a buzzer will sound. The system aims to provide effective security for applications like bank lockers or secure doors at an affordable cost. It analyzes the entered password and stored password in the Arduino's memory to determine if access should be granted.
Iot based low cost smart locker security systemIJARIIT
This paper project the simple IOT based low cost smart locker security system for domestic and office lockers, which
is very useful to the public where they can safeguard their jewels, money and documents from the thieves when the owner is
in/out station. The system alerts the owner of the smart locker by sending a message to the mobile. This security system is done
using Arduino with GSM module and a biometric scanner.
This project presents a door locking system which suggests two ways for unlocking a door using Internet of Things (IoT) and Fingerprint. Most of the major door lock security systems have several loopholes which could be broken down to gain access to the desired places, and it creates a concern for a secure lifestyle and proper working environment. People can access Internet services by using their cell phone, laptop and various gadgets. Fingerprint is a reliable biometric feature having a wide range of applications that require authentication. Biometric systems such as fingerprint provide tools to enforce reliable logs of system transactions and protect an individual’s right to privacy. In the proposed system, fingerprints of the authorized users are enrolled and verified to provide access to a facility that is used by multiple users. A user can also be removed and a new user can be enrolled in the system. We have implemented a centralized control system from where we can control who can enter in which rooms and who cannot. This is an Arduino Mega device based. Fingerprints are stored dynamically in a database for computing the different statistics.
FINGERPRINT BASED LOCKER WITH IMAGE CAPTUREMichael George
As we are moving in a World of advancement, so the security is the major concern in order to keep data isolate from the unauthorised users to access. In today’s World, we need high degree security system for the protection of our document, important data, as well as memory and jewellery. This review paper presents a secure fingerprint locker which is feasible. This system is proved successful on all norms of security of lockers. There are other methods of verifying authentication through password, RFID but this method is most efficient and reliable. To provide perfect security to the lockers and to make the work easier, this project is taking help of two different technologies, i.e. Embedded System and Biometrics. Biometrics is basically the measurement and use of unique characteristics of living beings to make them distinguish from one another. And this is more reliable then passwords and tokens which can be lost or stolen by the humans. In this paper we are providing the work done on this technique.
Iot based low cost smart locker security systemIJARIIT
This paper project the simple IOT based low cost smart locker security system for domestic and office lockers, which
is very useful to the public where they can safeguard their jewels, money and documents from the thieves when the owner is
in/out station. The system alerts the owner of the smart locker by sending a message to the mobile. This security system is done
using Arduino with GSM module and a biometric scanner.
This project presents a door locking system which suggests two ways for unlocking a door using Internet of Things (IoT) and Fingerprint. Most of the major door lock security systems have several loopholes which could be broken down to gain access to the desired places, and it creates a concern for a secure lifestyle and proper working environment. People can access Internet services by using their cell phone, laptop and various gadgets. Fingerprint is a reliable biometric feature having a wide range of applications that require authentication. Biometric systems such as fingerprint provide tools to enforce reliable logs of system transactions and protect an individual’s right to privacy. In the proposed system, fingerprints of the authorized users are enrolled and verified to provide access to a facility that is used by multiple users. A user can also be removed and a new user can be enrolled in the system. We have implemented a centralized control system from where we can control who can enter in which rooms and who cannot. This is an Arduino Mega device based. Fingerprints are stored dynamically in a database for computing the different statistics.
FINGERPRINT BASED LOCKER WITH IMAGE CAPTUREMichael George
As we are moving in a World of advancement, so the security is the major concern in order to keep data isolate from the unauthorised users to access. In today’s World, we need high degree security system for the protection of our document, important data, as well as memory and jewellery. This review paper presents a secure fingerprint locker which is feasible. This system is proved successful on all norms of security of lockers. There are other methods of verifying authentication through password, RFID but this method is most efficient and reliable. To provide perfect security to the lockers and to make the work easier, this project is taking help of two different technologies, i.e. Embedded System and Biometrics. Biometrics is basically the measurement and use of unique characteristics of living beings to make them distinguish from one another. And this is more reliable then passwords and tokens which can be lost or stolen by the humans. In this paper we are providing the work done on this technique.
Design Analysis Automatic Garage Door Openerijtsrd
The project that we are designing will help us to provide an easy but secure access to garage door. The installation cost of the door is low and the changes that are required to be done are also very less. To build such a door opener we need 1 Electric motor 2 Sliding door with rack and pinion arrangement 3 Wiring system, 4 Power source 5 Supporting clamps 6 Arduino Uno ,IR sensors 7 A remote to open and close the gate We are designing this automatic door in order to understand the basic functions of the automatic door and also detailed working of the concepts behind this. This project will also help us to acquire some basic knowledge about electrical circuits, sensors and welding processes. Nikhil Kr. Gupta | Mukul Singh Solanki | Ravi Ruwali | Shyam Yadav | Shivam Sharma "Design Analysis Automatic Garage Door Opener" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31118.pdf Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/31118/design-analysis-automatic-garage-door-opener/nikhil-kr-gupta
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
The most of the technical challenges for the society to detect and find a solution for visually impaired, with increased security and service motto towards the society helped to bring a solution which would help the visually impaired in the industries and other companies. Here we had come out with a prototype as a way of finding a solution to the visually impaired. The navigation assistant technology using RFID Tag Grid minimizes the dependency. The reader used in this system is embedded in the mobile and shoes to avoid dependency on travel. The RFID reader matches with the information specified to that ID and a voice signal is generated. Wireless RF links is placed in the Bluetooth device/ headphone for voice guidance. The proximity sensing unit is an auxiliary unit is added as a solution to address unexpected and non-mapped obstacles in the user’s path. Basically it contains ultrasonic Sensor Unit interfaced with microcontroller which is inter-linked to a vibrator that would be activated when nearing obstacles. This system is technically and economically feasible and may offer a maximum benefit to the disabled.
The purpose of this project is to control robot with an interface board of the Raspberry Pi, sensors and software to full fill real time requirement.
Controlling DC motors, different sensors, camera interfacing with raspberry Pi using GPIO pin.
Live streaming, Command the robot easily, sends data of different sensors which works automatically or control from anywhere at any time.
Design of the website and control page of robot is done using Java tools and HTML. This system works on IOT concept.
This will enable Raspberry Pi to be used for more robotic applications and cut down the cost for building an IOT Robot.
Implementation of Automatic Door Opening System with Entry Counter for Univer...ijtsrd
Automation is the technology by which a procedure or process is performed with minimal human assistance. This paper presents the implementation of automatic door opening system with entry counter for university library. It can be used not only for automatic door opening but also for counting entry person. It consists of entry unit and exit unit. Each unit consists of Arduino Uno, PIR Passive Infrared sensor and LCD Liquid Crystal Display . In entry unit, seven segment display is used as an entry counter to show the number of entry person. Welcome message and door condition are displayed on LCD. In exit unit, RTC Real Time Clock module shows a format of date and time on LCD. Quotes about library are also displayed on LCD. Thae Hsu Thoung | Dr. Zin Ma Ma Myo "Implementation of Automatic Door Opening System with Entry Counter for University Library" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26649.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26649/implementation-of-automatic-door-opening-system-with-entry-counter-for-university-library/thae-hsu-thoung
Fingerprint Attendance System - the hand-held device for classroom attendancemohamedbasheerkp
Fingerprint attendance system is a hand-held device which aims to automate entire attendance procedure of classroom using biometric technology. The device can be carried to the classroom and can be passed to the students. The hand-held device can take attendance without the intervention of teacher. This device would operate from a rechargeable Li-ion battery. The GUI application would help the teacher to manage the device through a host PC.
OTP BASED SMART LOCK SYSTEM USING GSM MODULEKethavathSrinu
The OTP (One Time Password) based smart lock system utilizes an Arduino microcontroller along with a GSM (Global System for Mobile Communications) module to provide secure access control. This system allows users to unlock a door or access a secure location by sending a unique OTP via SMS (Short Message Service) from their registered mobile phone number. The Arduino, connected to the GSM module, verifies the received OTP and controls the locking mechanism accordingly. This project combines elements of IoT (Internet of Things) and home automation to create a convenient and secure solution for controlling access to physical spaces remotely.
Design Analysis Automatic Garage Door Openerijtsrd
The project that we are designing will help us to provide an easy but secure access to garage door. The installation cost of the door is low and the changes that are required to be done are also very less. To build such a door opener we need 1 Electric motor 2 Sliding door with rack and pinion arrangement 3 Wiring system, 4 Power source 5 Supporting clamps 6 Arduino Uno ,IR sensors 7 A remote to open and close the gate We are designing this automatic door in order to understand the basic functions of the automatic door and also detailed working of the concepts behind this. This project will also help us to acquire some basic knowledge about electrical circuits, sensors and welding processes. Nikhil Kr. Gupta | Mukul Singh Solanki | Ravi Ruwali | Shyam Yadav | Shivam Sharma "Design Analysis Automatic Garage Door Opener" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31118.pdf Paper Url :https://www.ijtsrd.com/engineering/mechanical-engineering/31118/design-analysis-automatic-garage-door-opener/nikhil-kr-gupta
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
The most of the technical challenges for the society to detect and find a solution for visually impaired, with increased security and service motto towards the society helped to bring a solution which would help the visually impaired in the industries and other companies. Here we had come out with a prototype as a way of finding a solution to the visually impaired. The navigation assistant technology using RFID Tag Grid minimizes the dependency. The reader used in this system is embedded in the mobile and shoes to avoid dependency on travel. The RFID reader matches with the information specified to that ID and a voice signal is generated. Wireless RF links is placed in the Bluetooth device/ headphone for voice guidance. The proximity sensing unit is an auxiliary unit is added as a solution to address unexpected and non-mapped obstacles in the user’s path. Basically it contains ultrasonic Sensor Unit interfaced with microcontroller which is inter-linked to a vibrator that would be activated when nearing obstacles. This system is technically and economically feasible and may offer a maximum benefit to the disabled.
The purpose of this project is to control robot with an interface board of the Raspberry Pi, sensors and software to full fill real time requirement.
Controlling DC motors, different sensors, camera interfacing with raspberry Pi using GPIO pin.
Live streaming, Command the robot easily, sends data of different sensors which works automatically or control from anywhere at any time.
Design of the website and control page of robot is done using Java tools and HTML. This system works on IOT concept.
This will enable Raspberry Pi to be used for more robotic applications and cut down the cost for building an IOT Robot.
Implementation of Automatic Door Opening System with Entry Counter for Univer...ijtsrd
Automation is the technology by which a procedure or process is performed with minimal human assistance. This paper presents the implementation of automatic door opening system with entry counter for university library. It can be used not only for automatic door opening but also for counting entry person. It consists of entry unit and exit unit. Each unit consists of Arduino Uno, PIR Passive Infrared sensor and LCD Liquid Crystal Display . In entry unit, seven segment display is used as an entry counter to show the number of entry person. Welcome message and door condition are displayed on LCD. In exit unit, RTC Real Time Clock module shows a format of date and time on LCD. Quotes about library are also displayed on LCD. Thae Hsu Thoung | Dr. Zin Ma Ma Myo "Implementation of Automatic Door Opening System with Entry Counter for University Library" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26649.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26649/implementation-of-automatic-door-opening-system-with-entry-counter-for-university-library/thae-hsu-thoung
Fingerprint Attendance System - the hand-held device for classroom attendancemohamedbasheerkp
Fingerprint attendance system is a hand-held device which aims to automate entire attendance procedure of classroom using biometric technology. The device can be carried to the classroom and can be passed to the students. The hand-held device can take attendance without the intervention of teacher. This device would operate from a rechargeable Li-ion battery. The GUI application would help the teacher to manage the device through a host PC.
OTP BASED SMART LOCK SYSTEM USING GSM MODULEKethavathSrinu
The OTP (One Time Password) based smart lock system utilizes an Arduino microcontroller along with a GSM (Global System for Mobile Communications) module to provide secure access control. This system allows users to unlock a door or access a secure location by sending a unique OTP via SMS (Short Message Service) from their registered mobile phone number. The Arduino, connected to the GSM module, verifies the received OTP and controls the locking mechanism accordingly. This project combines elements of IoT (Internet of Things) and home automation to create a convenient and secure solution for controlling access to physical spaces remotely.
To protect user’s password from theft by using rfid and mems technologyeSAT Journals
Abstract In this paper, MEMS (Micro Electro Mechanical System) is implemented using Embedded controller PIC 16F877A. MEMS can be used to sense motion. Microcontroller detect any motion while they are occurs or not. The user can assign a password by fixed set of motions as decided by them. In that there are three techniques uses for user’s authentication. Firstly Microcontroller senses any motion which is matches with exist motion password, then first phase will unlock and it goes into next phase is human interface method of keypad that is traditional where the user enters the predefined password, if it is matched with the predefined password then second phase will be unlock. Then user will directly enter into the final phase which is a RFID card that is read by a RFID reader module connected to the Micro controller if the card is matched the final phase get completed and the desired operation will start. A buzzer is used for an indication of wrong password. This buzzer is ON until right password matches with existing password. Key Words: -Codebooks, Key Logger, PIC Microcontroller, Secret Little Functions, RFID, MEMS.
Electronic Door Lock using RFID and Password Based on Arduinoijtsrd
In this system, the electronic door lock using RFID and password based on Arduino UNO. It uses in doors and cupboards as electronic lock and so on. The security system is important at homes, schools, offices and industries in real life. The purpose of this paper is to develop a smart home security system using RFID and keypad. RFID is ID card reader to read ID card's value and Arduino UNO. If ID card reader is true, Arduino permits to press password on keypad. If password is true, lock style solenoid is unlock. If password is false, solenoid is lock. The electronic door lock system for home automation is able to interact with security management system for users and smart cards. Smart card is easy to use and accept more secure in real life. And then password is traditional but that is more impressive and more secure for human life. The Arduino microcontroller is used to control the whole system. Ni Ni San Hlaing | San San Lwin ""Electronic Door Lock using RFID and Password Based on Arduino"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd22875.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/22875/electronic-door-lock-using-rfid-and-password-based-on-arduino/ni-ni-san-hlaing
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Online aptitude test management system project report.pdfKamal Acharya
The purpose of on-line aptitude test system is to take online test in an efficient manner and no time wasting for checking the paper. The main objective of on-line aptitude test system is to efficiently evaluate the candidate thoroughly through a fully automated system that not only saves lot of time but also gives fast results. For students they give papers according to their convenience and time and there is no need of using extra thing like paper, pen etc. This can be used in educational institutions as well as in corporate world. Can be used anywhere any time as it is a web based application (user Location doesn’t matter). No restriction that examiner has to be present when the candidate takes the test.
Every time when lecturers/professors need to conduct examinations they have to sit down think about the questions and then create a whole new set of questions for each and every exam. In some cases the professor may want to give an open book online exam that is the student can take the exam any time anywhere, but the student might have to answer the questions in a limited time period. The professor may want to change the sequence of questions for every student. The problem that a student has is whenever a date for the exam is declared the student has to take it and there is no way he can take it at some other time. This project will create an interface for the examiner to create and store questions in a repository. It will also create an interface for the student to take examinations at his convenience and the questions and/or exams may be timed. Thereby creating an application which can be used by examiners and examinee’s simultaneously.
Examination System is very useful for Teachers/Professors. As in the teaching profession, you are responsible for writing question papers. In the conventional method, you write the question paper on paper, keep question papers separate from answers and all this information you have to keep in a locker to avoid unauthorized access. Using the Examination System you can create a question paper and everything will be written to a single exam file in encrypted format. You can set the General and Administrator password to avoid unauthorized access to your question paper. Every time you start the examination, the program shuffles all the questions and selects them randomly from the database, which reduces the chances of memorizing the questions.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024