You may have hoped to retire before IPv6 became a reality, but unfortunately the IPv4 address exhaustion came too fast. For the rest of us, we’re going to bite off a small piece of the 15-year old IPv6 pie and talk about how to get started!
• Address format refresher
• IPv4 and IPv6 protocol comparison
• IPv6 neighbor discovery and auto-configuration
• Current migration and coexistence strategies
• ICMPv6, DHCPv6, and DNSv6
• How to get started at home
Hands-on Experience with IPv6 Routing and ServicesCisco Canada
This IPv6 basic and advanced lab will provide you an opportunity to configure, troubleshoot, design and implement IPv6 network using IPv6 technologies and features such as; IPv6 addressing, IPv6 neighbor discovery, HSRPv6, static routing, OSPFv3, EIGRPv6 and BGPv6. You will be provided with a scenario made up with an IPv4 network where you will get the opportunity to configure and implement IPv6 based on the requirements and needs on the network. For e.g where would you deploy dual stack, where it make sense to do tunneling and how to deploy an IPv6 routing protocols without impacting your existing Network infrastructure.
Pv6 Tutorial for Beginners - Learn IPv6 (Internet protocol Version-6) in simple and easy steps. A beginner's tutorial containing complete knowledge of IPv6, IPv6 Features,
You may have hoped to retire before IPv6 became a reality, but unfortunately the IPv4 address exhaustion came too fast. For the rest of us, we’re going to bite off a small piece of the 15-year old IPv6 pie and talk about how to get started!
• Address format refresher
• IPv4 and IPv6 protocol comparison
• IPv6 neighbor discovery and auto-configuration
• Current migration and coexistence strategies
• ICMPv6, DHCPv6, and DNSv6
• How to get started at home
Hands-on Experience with IPv6 Routing and ServicesCisco Canada
This IPv6 basic and advanced lab will provide you an opportunity to configure, troubleshoot, design and implement IPv6 network using IPv6 technologies and features such as; IPv6 addressing, IPv6 neighbor discovery, HSRPv6, static routing, OSPFv3, EIGRPv6 and BGPv6. You will be provided with a scenario made up with an IPv4 network where you will get the opportunity to configure and implement IPv6 based on the requirements and needs on the network. For e.g where would you deploy dual stack, where it make sense to do tunneling and how to deploy an IPv6 routing protocols without impacting your existing Network infrastructure.
Pv6 Tutorial for Beginners - Learn IPv6 (Internet protocol Version-6) in simple and easy steps. A beginner's tutorial containing complete knowledge of IPv6, IPv6 Features,
The Internet industry is undergoing a fundamental change as it transitions from IPv4 to IPv6. These slides are from the May 2011 webcast which provided an introduction to IPv6, covering the various issues and concerns about this new protocol, as well as the opportunities it offers.
The webcast featured Limor Schafman and Dale Geesey, IPv6 experts, discussing what IPv6 is, why it’s different, its advantages, the transition period from IPv4 and how organizations should start preparing.
You can view the webcast on the Commtouch Slideshare page.
"CHT IPv6 Measurement and Deployment" by Chia-Wei Tseng.
A presentation given at the APNIC 40 IPv6 Readiness Measurement BoF and APIPv6TF sessions on Wed 9 Sep 2015.
As with any new technology, IPv6 requires a learning curve for network managers and IT administration and operations personnel. This presentation covers many of the current best practices for approaching and progressing with an IPv6 deployment.
IPv6 is the most recent version of the Internet Protocol (IP), and was developed by IETF to overcome the inevitable exhaustion of IPv4 addresses. In order to simplify the transition towards IPv6, the protocol iterated very little on how IPv4 operates other than offering more address space. This inadvertently produced the exact opposite of the intended effect: with no compelling new features for anyone outside of network engineering, IPv6 deployment has been hampered for decades, as developers find increasingly creative ways of efficiently using IPv4 address space rather than bearing the cost of transition.
In this talk, Fastly Network Engineer João Taveira discusses these protocol design failures and instead explain how Fastly re-architected its infrastructure around IPv6. By addressing IPv6 in a clean-slate manner, Fastly avoided perpetuating many of the mistakes of IPv4, and the resulting network architecture has the potential to significantly affect the performance, resilience, and economics of content delivery.
Rome 2017: Building advanced voice assistants and chat botsCisco DevNet
If it takes minutes to code a simple bot, building professional bots represents quite a challenge. Soon you realize you need serious programming and API architecture experience but also “Bot” specific skills. In this session, we'll first show the code of advanced Chat and Voice interactions, and then explore the challenges faced when building advanced Bots (Context storage, NLP approaches, Bot Metadata, OAuth scopes), and discuss interesting opportunities from latest industry trends (Bot platforms, Serverless, Microservices). This talk is about showing the code and sharing lessons learned.
Ein Anlass des www.swissipv6council.ch
Referentin: Nathalie Trenaman, RIPE NCC
Nathalie Trenaman von RIPE wird in ihrem Referat Best Practices zur Adressierung vermitteln und aufzeigen, wie Firmen zu ihrem IPv6 Range kommen. Die definitive Agenda wird so bald wie möglich bekannt gegeben.
Das Referat wird in Englisch gehalten.
18:00 Uhr
Begrüssung durch Silvia Hagen, Präsidentin Swiss IPv6 Council
18:05 Uhr
Nathalie Trenaman, RIPE
Inhalt:
1. Teil
IPv6 Adressierung
Wie muss ich ein IPv6 Netzwerk konzeptionell aufsetzen?
2. Teil
Policies
Vorstellung der Möglichkeiten für Unternehmen, sich die IPv6 Adressen zu sichern
Wer bekommt welche Ranges?
Wie muss man sich bewerben?
Q&A
Über RIPE NCC
RIPE NCC is the Regional Internet Registry responsible for IPv6 distribution in Europe, Middle East and Central Asia. We build awareness among all Internet stakeholders of the need to deploy IPv6. At this moment, RIPE NCC has over 10.000 members. 69% of these members have a block of IPv6 addresses. The first hurdle of an IPv6 deployment is building a scalable IPv6 addressing plan. Since there are so many addresses and distribution is done in subnets, a lot of engineers and architects see this phase of the deployment as one of the most challenging. Nathalie will shine a light on current best practices, taking into account different transitioning mechanisms and end users.
The issue of deploying IPv6 Technology has been a topic of debate for more than a decade now.
Professionals have been discussing on the transition from Internet Protocol version 4 (IPVv4) to Internet
Protocol version 6 (IPv6) due to the fact that the IPv4 address space would soon be exhausted.
In this paper, we analyse the IPv4 and IPv6 technologies and look at the benefits of migrating to IPv6,
its social implications, risks & challenges and the opportunities the IPv6 migration offers
The Internet industry is undergoing a fundamental change as it transitions from IPv4 to IPv6. These slides are from the May 2011 webcast which provided an introduction to IPv6, covering the various issues and concerns about this new protocol, as well as the opportunities it offers.
The webcast featured Limor Schafman and Dale Geesey, IPv6 experts, discussing what IPv6 is, why it’s different, its advantages, the transition period from IPv4 and how organizations should start preparing.
You can view the webcast on the Commtouch Slideshare page.
"CHT IPv6 Measurement and Deployment" by Chia-Wei Tseng.
A presentation given at the APNIC 40 IPv6 Readiness Measurement BoF and APIPv6TF sessions on Wed 9 Sep 2015.
As with any new technology, IPv6 requires a learning curve for network managers and IT administration and operations personnel. This presentation covers many of the current best practices for approaching and progressing with an IPv6 deployment.
IPv6 is the most recent version of the Internet Protocol (IP), and was developed by IETF to overcome the inevitable exhaustion of IPv4 addresses. In order to simplify the transition towards IPv6, the protocol iterated very little on how IPv4 operates other than offering more address space. This inadvertently produced the exact opposite of the intended effect: with no compelling new features for anyone outside of network engineering, IPv6 deployment has been hampered for decades, as developers find increasingly creative ways of efficiently using IPv4 address space rather than bearing the cost of transition.
In this talk, Fastly Network Engineer João Taveira discusses these protocol design failures and instead explain how Fastly re-architected its infrastructure around IPv6. By addressing IPv6 in a clean-slate manner, Fastly avoided perpetuating many of the mistakes of IPv4, and the resulting network architecture has the potential to significantly affect the performance, resilience, and economics of content delivery.
Rome 2017: Building advanced voice assistants and chat botsCisco DevNet
If it takes minutes to code a simple bot, building professional bots represents quite a challenge. Soon you realize you need serious programming and API architecture experience but also “Bot” specific skills. In this session, we'll first show the code of advanced Chat and Voice interactions, and then explore the challenges faced when building advanced Bots (Context storage, NLP approaches, Bot Metadata, OAuth scopes), and discuss interesting opportunities from latest industry trends (Bot platforms, Serverless, Microservices). This talk is about showing the code and sharing lessons learned.
Ein Anlass des www.swissipv6council.ch
Referentin: Nathalie Trenaman, RIPE NCC
Nathalie Trenaman von RIPE wird in ihrem Referat Best Practices zur Adressierung vermitteln und aufzeigen, wie Firmen zu ihrem IPv6 Range kommen. Die definitive Agenda wird so bald wie möglich bekannt gegeben.
Das Referat wird in Englisch gehalten.
18:00 Uhr
Begrüssung durch Silvia Hagen, Präsidentin Swiss IPv6 Council
18:05 Uhr
Nathalie Trenaman, RIPE
Inhalt:
1. Teil
IPv6 Adressierung
Wie muss ich ein IPv6 Netzwerk konzeptionell aufsetzen?
2. Teil
Policies
Vorstellung der Möglichkeiten für Unternehmen, sich die IPv6 Adressen zu sichern
Wer bekommt welche Ranges?
Wie muss man sich bewerben?
Q&A
Über RIPE NCC
RIPE NCC is the Regional Internet Registry responsible for IPv6 distribution in Europe, Middle East and Central Asia. We build awareness among all Internet stakeholders of the need to deploy IPv6. At this moment, RIPE NCC has over 10.000 members. 69% of these members have a block of IPv6 addresses. The first hurdle of an IPv6 deployment is building a scalable IPv6 addressing plan. Since there are so many addresses and distribution is done in subnets, a lot of engineers and architects see this phase of the deployment as one of the most challenging. Nathalie will shine a light on current best practices, taking into account different transitioning mechanisms and end users.
The issue of deploying IPv6 Technology has been a topic of debate for more than a decade now.
Professionals have been discussing on the transition from Internet Protocol version 4 (IPVv4) to Internet
Protocol version 6 (IPv6) due to the fact that the IPv4 address space would soon be exhausted.
In this paper, we analyse the IPv4 and IPv6 technologies and look at the benefits of migrating to IPv6,
its social implications, risks & challenges and the opportunities the IPv6 migration offers
464XLAT Tutorial, by Masataka Mawatari.
Presented at the APNIC 40 "Hypes? Fanfares? Fads? Wading through the muddy IPv6 puddle" session, Wed 9 Sep 2015.
in this slides the topic of internet protocol version 6 is covered in very easy form that help the beginners of networking students .. l for more suggestions comment there
New Network ProtocolRunning Head New Network Protocol Pap.docxcurwenmichaela
New Network Protocol
Running Head: New Network Protocol Paper
Data Communication and Networking
New Network Protocol Paper
Table Of Contents
Abstract ............................................................................................................................. 3
Introduction ......................................................................................................................... 3
History ................................................................................................................................. 4
Need for IPV6 and Disadvantages of IPv4 .......................................................................... 4
Advantages of IPV6 ............................................................................................................. 5
Statistics ................................................................................................................................ 6
Conclusion ............................................................................................................................ 6
References ............................................................................................................................. 8
Abstract
In today's world as technology is growing people are looking to adopt new technologies which offer them a feasible and easy access to the resources with a security that makes them away from common threats. This paper introduces the introduction to the internet protocols and concept of the IPV4 and IPV6, as well what are the disadvantages in the IPV4 and the advantages in IPV6. This paper describes the future concepts of the IPV6 and the future impact of the IPV6 on the network field by describing a brief history of the internet protocols and the statistical representation of the IPV6 users.
Introduction
Transport layer is the basic layer in the OSI and the TCP/IP model. The basic task of this layer is to send or receive the data or voice and video data grams or packets over the internet. IPV 4 is meant for Internet Protocol version 4. The network protocol that has been used in the Internet since its inception is IPv4 , which provides 2^32 distinct addresses. Its successor IPv6(Internet Protocol Version 6) provides 2^128 addresses, but IPv6 adoption has not proceeded as quickly as its designers expected (Erik Kline,2011). The main need for the migration to IPV6 from IPV4 is mainly for the ip addresses . IPv4 provides approximately 4.3 billion of ip addresses but there is a need for more ip addresses. For that reason they introduced IPV6.
History
The current trend of the Internet Protocol IPv4 was initially grown in the 1970s, and the primary convention standard RFC 791 that administers IPv4 usefulness was distributed in 1981. With the remarkable extension of Internet use - particularly by highly populated nations like India and China. The approaching deficiency of loca ...
IPv4 provided the primary addressing scheme in TCPIP. However after.pdfformicreation
IPv4 provided the primary addressing scheme in TCP/IP. However after many years its
limitations begin to catch up with networking implementations. What are the main limitations
that you are familiar with from reading the suggested chapters?
Solution
Internet protocol version4 also called as an IPV4 defined by Internet Engineering Task
Force(IETF) in the year 1981.IPV4 uses a 32 bit address space. Initial design of IPv4 did not
predict the growth of internet and this created many issues, which proved IPv4 need to be
changed. The main limitations of IPv4 are as follows.
1.Address configuration related issues:In these days Networks and also internet is expanding and
many new computers and devices are using IP. The configuration of IP addresses (Either static or
dynamic) should be made simple.
2.Scarcity of IPv4 Addresses:As we know that IPV4 uses a 32 bit address space and furthur these
are again classfied as five classes which are CLASS-A,CLASS-B,CLASS-C,CLASS-D,CLASS-
E.where the classes D and E are used for research and development and reserved for future
use.The 32-bit address space allows for 4,294,967,296 IPv4 addresses.But the previous and
current IPv4 address allocation practices limit the number of available public IPv4 addresses.
Many addresses which are allocated to many companies were not used and this created scarcity
of IPv4 addresses.
For this scarcity Reason many Many organistion uses the Network Address Translation(NAT) to
map multiple private IPv4 addresses to a single public IPv4 address. But the NAT has many
limitations they are as follows.
NAT (Network Address Translation) do not support network layer security standards and it do
not support the mapping of all upper layer protocols. NAT can also create network problems
when two organizations which use same private IPv4 address ranges communicate. More
servers, workstations and devices which are connected to the internet demand the need for more
addresses and the current statistics prove that public IPv4 address space will be depleted soon.
The scarcity of IPv4 address is a major limitation of IPv4 addressing system.
3.Security Related Issues: Internet Protocol Security (IPSec) is a protocol suit that enables
network security by protecting the data being sent from being viewed or modified. IPSec
provides security for IPv4 packets, but Internet Protocol Security (IPSec) is not built-in and
optional. Many IPSecimplementations are having their own rules.
4. Quality of service (QoS): The QOS relies in on 8 bits of the Type Of Service(TOS) and
PayLoad in IPV4.but the IPV4 TOS has limited functionality and payload identification is not
possible when an data gram packet is encrypted.
Inorder to overcome these Limitations ipv6 came into Figure..
The Internet is growing beyond imaginations and borders,
but IPv4 limits today's Internet growth. The "old" Internet Protocol originally was built to experimentally support a few dozen sites with a few hundred computers
IPv6 IAB/IETF Activities Report as presented by Cathy Aronson at ARIN's Public Policy and Members Meeting in April 2014. All ARIN 33 presentations are posted online at: https://www.arin.net/ARIN33_materials
Implementation of “Traslator Strategy” For Migration of Ipv4 to Ipv6IJERA Editor
This paper is focused on the Translator strategy for migration of IPv4 to Ipv6 implemented in Cisco packet
tracer. It describes the design and configuration of network devices and packet transfer between devices of IPv4
and IPv6 networks using NAT-PT as transition mechanism. First major version of IP, IPv4 is the dominant
protocol of internet.IPv6 is developed to deal with long anticipated problem of IPv4 running out of addresses.
The migration from IPv4 to IPv6 must be implemented node by node by using auto-configuration procedures to
eliminate the need to configure IPv6 hosts manually.
Side Effects of M
A mobile phone is a wireless handheld device that allows users to make and receive calls and to send text messages, among other features.
The earliest generation of mobile phones could only make and receive calls and to send text messages, among other features.
Today’s mobile phones, however, are packed with many additional features, such as web browsers, games, cameras, video players and even navigational systems.
A mobile phone may also be known as a cellular phone or simply a cell phone.
Flex is a powerful, open source application framework that allows you to easily build mobile applications for iOS, Android,
and BlackBerry Tablet OS devices, as well as traditional applications for browser and desktop using the same programming
model, tool, and codebase.
You will build Flex applications more easily using Adobe Flash Builder software, an enterprise-class Eclipse based IDE.This
tutorial will give you great understanding on Flex concepts needed to get a web and mobile application up and running.
E 5 development-of_a_data_management_system_for_studEdress Oryakhail
Abstract
With the advances of information technology nowadays, it is more than appropriate for an educational
institution to make use of the existing technology to ease the process of managing students’ data and grades.
One of the applications needed by the Information Systems department is a data management system for
student’s final year projects that can manage their grades and generate full reports.
This system will be developed as a web-based system, with access limited only to the university's local network.
To design this new system, analyses of the current final year project procedure, data and grade management will
be conducted. The results of the analyses will form the foundation of the design and development of a database
management system – the core support of the data management system. The interface of the system will be
designed and built on the principles of usability.
It is aimed that both the department's administration and the Head of Department can benefit from using this
system to input, manage and view students' final year projects and the respective grades.
E-Commerce or Electronics Commerce is a methodology of modern business which addresses the need of business
organizations.
This reference will take you through simple and practical approach while learning e-commerce principles.
This small tutorial is based on my past 16+ years of experience in software development industry. I have
gone through different stages in my career starting from trainee software developer till senior
management.
I do not want to keep my learnings with myself so I had written a small tutorial few years ago and after
getting lot of motivation from my dear readers, I thought of revising it and adding few more learnings
which may benefit many other software engineers and developers working in this lovely industry.
Database Management System or DBMS in short, refers to the technology of storing and retriving users data
with utmost efficiency along with safety and security features. DBMS allows its users to create their own
databases which are relevant with the nature of work they want. These databases are highly configurable and
offers bunch of options.
This tutorial will teach you basics of Database Management Systems (DBMS) and will also take you through
various advance concepts related to Database Management Systems.
Data communications refers to the transmission of this digital data between two or more computers and
a computer network or data network is a telecommunications network that allows computers to
exchange data. The physical connection between networked computing devices is established using
either cable media or wireless media. The best-known computer network is the Internet.
This tutorial will teach you basics of Data Communication and Computer Network (DCN) and will also
take you through various advance concepts related to Data Communication and Computer Network.
Cascading Style Sheets, fondly referred to as CSS, is a simple design language intended to
simplify the process of making web pages presentable.
CSS handles the look and feel part of a web page. Using CSS, you can control the color of the
text, the style of fonts, the spacing between paragraphs, how columns are sized and laid out,
what background images or colors are used, as well as a variety of other effects.
CSS is easy to learn and understand but it provides powerful control over the presentation of an
HTML document. Most commonly, CSS is combined with the markup languages HTML or XHTML.
Computer Organization refers to the level of abstraction above the digital logic level, but below the operating system level.
At this level, the major components are functional units or subsystems that correspond to specific pieces of hardware built
from the lower level building blocks described in the previous module.
This tutorial gives a complete understanding on Computer Logical Organization starting from basic computer overview till its
advanced architecture
Computer is an advanced electronic device that takes raw data as input from the user and processes
these data under the control of set of instructions (called program) and gives the result (output) and
saves output for the future use.
This Computer Fundamentals tutorial covers a foundational understanding of computer hardware,
software, operating systems, peripherals etc and how to get the most value and impact from computer
technology.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
How to Create Map Views in the Odoo 17 ERPCeline George
The map views are useful for providing a geographical representation of data. They allow users to visualize and analyze the data in a more intuitive manner.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
3. TUTORIALS POINT
Simply Easy Learning
ABOUT THE TUTORIAL
IPv6 Tutorial
Internet Protocol version 6 (IPv6) is the latest revision of the Internet Protocol (IP) and the first version
of the protocol to be widely deployed. IPv6 was developed by the Internet Engineering Task Force (IETF)
to deal with the long-anticipated problem of IPv4 address exhaustion.
This tutorial will help you in understanding IPv6 and associated terminologies along with appropriate
references and examples.
Audience
This tutorial has been designed to help beginners understand basic concepts of IPv6 required to work
with any TCP/IP based protocols. After completing this tutorial you will find yourself at a moderate level
of expertise of IPv6 from where you can take yourself to next levels.
Prerequisites
Before you start proceeding with this tutorial, I'm making an assumption that you are already aware
about basic computer and network concepts like what is a protocol, why do we need protocol, Network
Layers etc.
Copyright & Disclaimer Notice
All the content and graphics on this tutorial are the property of tutorialspoint.com. Any content from
tutorialspoint.com or this tutorial may not be redistributed or reproduced in any way, shape, or form
without the written permission of tutorialspoint.com. Failure to do so is a violation of copyright laws.
This tutorial may contain inaccuracies or errors and tutorialspoint provides no guarantee regarding the
accuracy of the site or its contents including this tutorial. If you discover that the tutorialspoint.com site
or this tutorial content contains some errors, please contact us at webmaster@tutorialspoint.com
5. TUTORIALS POINT
Simply Easy Learning
IPv6 - Routing........................................................................... 29
Routing protocols .....................................................................................29
Protocols changed to support IPv6: .........................................................30
IPv6 - Summary........................................................................ 31
Future of IPv6...........................................................................................31
6. TUTORIALS POINT
Simply Easy Learning
IPv6 - Overview
Internet Protocol version 6, is a new addressing protocol designed to incorporate whole sort of requirement of
future internet known to us as Internet version 2. This protocol as its predecessor IPv4, works on Network Layer
(Layer-3). Along with its offering of enormous amount of logical address space, this protocol has ample of
features which addresses today‟s shortcoming of IPv4.
Why new IP version?
So far, IPv4 has proven itself as a robust routable addressing protocol and has served human being for decades
on its best-effort-delivery mechanism. It was designed in early 80‟s and did not get any major change afterward.
At the time of its birth, Internet was limited only to a few Universities for their research and to Department of
Defense. IPv4 is 32 bits long which offers around 4,294,967,296 (2
32
) addresses. This address space was
considered more than enough that time. Given below are major points which played key role in birth of IPv6:
Internet has grown exponentially and the address space allowed by IPv4 is saturating. There is a requirement
of protocol which can satisfy the need of future Internet addresses which are expected to grow in an
unexpected manner.
Using features such as NAT, has made the Internet discontiguous i.e. one part which belongs to intranet,
primarily uses private IP addresses; which has to go through number of mechanism to reach the other part,
the Internet, which is on public IP addresses.
IPv4 on its own does not provide any security feature which is vulnerable as data on Internet, which is a
public domain, is never safe. Data has to be encrypted with some other security application before being sent
on Internet.
Data prioritization in IPv4 is not up to date. Though IPv4 has few bits reserved for Type of Service or Quality
of Service, but they do not provide much functionality.
IPv4 enabled clients can be configured manually or they need some address configuration mechanism.
There exists no technique which can configure a device to have globally unique IP address.
Why not IPv5?
Till date, Internet Protocol has been recognized has IPv4 only. Version 0 to 3 were used while the protocol was
itself under development and experimental process. So, we can assume lots of background activities remain
active before putting a protocol into production. Similarly, protocol version 5 was used while experimenting with
CHAPTER
1
7. TUTORIALS POINT
Simply Easy Learning
stream protocol for internet. It is known to us as Internet Stream Protocol which used Internet Protocol number 5
to encapsulate its datagram. Though it was never brought into public use, but it was already used.
Here is a table of IP version and their use:
Brief History
After IPv4‟s development in early 80s, the available IPv4 address pool begun to shrink rapidly as the demand of
addresses exponentially increased with Internet. Taking pre-cognizance of situation that might arise IETF, in
1994, initiated the development of an addressing protocol to replace IPv4. The progress of IPv6 can be tracked
by means of RFC published:
1998 – RFC 2460 – Basic Protocol
2003 – RFC 2553 – Basic Socket API
2003 – RFC 3315 – DHCPv6
2004 – RFC 3775 – Mobile IPv6
2004 – RFC 3697 – Flow Label Specification
2006 – RFC 4291 – Address architecture (revision)
2006 – RFC 4294 – Node requirement
June 06, 2012 some of Internet giants chose to put their Servers on IPv6. Presently they are using Dual Stack
mechanism to implement IPv6 parallel with IPv4.
8. TUTORIALS POINT
Simply Easy Learning
IPv6 - Features
The successor of IPv4 is not designed to be backward compatible. Trying to keep the basic functionalities
of IP addressing, IPv6 is redesigned entirely. It offers the following features:
Larger Address Space:
In contrast to IPv4, IPv6 uses 4 times more bits to address a device on the Internet. This much of extra bits can
provide approximately 3.4×1038 different combinations of addresses. This address can accumulate the
aggressive requirement of address allotment for almost everything in this world. According to an estimate, 1564
addresses can be allocated to every square meter of this earth.
Simplified Header:
IPv6‟s header has been simplified by moving all unnecessary information and options (which are present in IPv4
header) to the end of the IPv6 header. IPv6 header is only twice as bigger than IPv4 providing the fact the IPv6
address is four times longer.
End-to-end Connectivity:
Every system now has unique IP address and can traverse through the internet without using NAT or other
translating components. After IPv6 is fully implemented, every host can directly reach other host on the Internet,
with some limitations involved like Firewall, Organization‟s policies, etc.
Auto-configuration:
IPv6 supports both stateful and stateless auto configuration mode of its host devices. This way absence of a
DHCP server does not put halt on inter segment communication.
Faster Forwarding/Routing:
Simplified header puts all unnecessary information at the end of the header. All information in first part of the
header are adequate for a Router to take routing decision thus making routing decision as quickly as looking at
the mandatory header.
IPSec:
Initially it was decided for IPv6 to must have IPSec security, making it more secure than IPv4. This feature has
now been made optional.
No Broadcast:
CHAPTER
2
9. TUTORIALS POINT
Simply Easy Learning
Though Ethernet/Token Ring are considered as broadcast network because they support Broadcasting, IPv6
does not have any Broadcast support anymore left with it. It uses multicast to communicate with multiple hosts.
Anycast Support:
This is another characteristic of IPv6. IPv6 has introduced Anycast mode of packet routing. In this mode, multiple
interfaces over the Internet are assigned same Anycast IP address. Routers, while routing, sends the packet to
the nearest destination.
Mobility:
IPv6 was designed keeping mobility feature in mind. This feature enables hosts (such as mobile phone) to roam
around in different geographical area and remain connected with same IP address. IPv6 mobility feature takes
advantage of auto IP configuration and Extension headers.
Enhanced Priority support:
Where IPv4 used 6 bits DSCP (Differential Service Code Point) and 2 bits ECN (Explicit Congestion Notification)
to provide Quality of Service but it could only be used if the end-to-end devices support it, that is, the source and
destination device and underlying network must support it.
In IPv6, Traffic class and Flow label are used to tell underlying routers how to efficiently process the packet and
route it.
Smooth Transition:
Large IP address scheme in IPv6 enables to allocate devices with globally unique IP addresses. This assures that
mechanism to save IP addresses such as NAT is not required. So devices can send/receive data between each
other, for example VoIP and/or any streaming media can be used much efficiently.
Other fact is, the header is less loaded so routers can make forwarding decision and forward them as quickly as
they arrive.
Extensibility:
One of the major advantage of IPv6 header is that it is extensible to add more information in the option part. IPv4
provides only 40-bytes for options whereas options in IPv6 can be as much as the size of IPv6 packet itself.
10. TUTORIALS POINT
Simply Easy Learning
IPv6 - Addressing Modes
In computer networking, addressing mode refers to the mechanism how we address a host on the network.
IPv6 offers several types of modes by which a single host can be addressed, more than one host can be
addressed at once or the host at closest distance can be addressed.
Unicast
In unicast mode of addressing, an IPv6 interface (host) is uniquely identified in a network segment. The IPv6
packet contains both source and destination IP addresses. A host interface is equipped with an IP address which
is unique in that network segment. A network switch or router when receives a unicast IP packet, destined to
single host, sends out to one of its outgoing interface which connects to that particular host.
[Image: Unicast Messaging]
Multicast
The IPv6 multicast mode is same as that of IPv4. The packet destined to multiple hosts is sent on a special
multicast address. All hosts interested in that multicast information, need to join that multicast group first. All
CHAPTER
3
11. TUTORIALS POINT
Simply Easy Learning
interfaces which have joined the group receive the multicast packet and process it, while other hosts not
interested in multicast packets ignore the multicast information.
[Image: Multicast Messaging]
Anycast
IPv6 has introduced a new type of addressing, which is called Anycast addressing. In this addressing mode,
multiple interfaces (hosts) are assigned same Anycast IP address. When a host wishes to communicate with a
host equipped with an Anycast IP address, sends a Unicast message. With the help of complex routing
mechanism, that Unicast message is delivered to the host closest to the Sender, in terms of Routing cost.
12. TUTORIALS POINT
Simply Easy Learning
[Image: Anycast Messaging]
Let‟s take an example of TutorialPoints.com Web Servers, located in all continents. Assume that all Web Servers
are assigned single IPv6 Anycast IP Address. Now when a user from Europe wants to reach TutorialsPoint.com
the DNS points to the server which is physically located in Europe itself. If a user from India tries to reach
Tutorialspoint.com, the DNS will then point to Web Server physically located in Asia only. Nearest or Closest
terms are used in terms of Routing Cost.
In the above picture, When a client computer tries to reach a Server, the request is forwarded to the Server with
lowest Routing Cost.
13. TUTORIALS POINT
Simply Easy Learning
IPv6 - Address Types
Hexadecimal Number System
Before introducing IPv6 Address format, we shall look into Hexadecimal Number System. Hexadecimal is
positional number system which uses radix (base) of 16. To represent the values in readable format, this system
uses 0-9 symbols to represent values from zero to nine and A-F symbol to represent values from ten to fifteen.
Every digit in Hexadecimal can represent values from 0 to 15.
[Image: Conversion Table]
CHAPTER
4
14. TUTORIALS POINT
Simply Easy Learning
Address Structure
An IPv6 address is made of 128 bits divided into eight 16-bits blocks. Each block is then converted into 4-digit
Hexadecimal numbers separated by colon symbol.
For example, the below is 128 bit IPv6 address represented in binary format and divided into eight 16-bits blocks:
0010000000000001 0000000000000000 0011001000110100 1101111111100001 0000000001100011
0000000000000000 0000000000000000 1111111011111011
Each block is then converted into Hexadecimal and separated by „:‟ symbol:
2001:0000:3238:DFE1:0063:0000:0000:FEFB
Even after converting into Hexadecimal format, IPv6 address remains long. IPv6 provides some rules to shorten
the address. These rules are:
Rule:1 Discard leading Zero(es):
In Block 5, 0063, the leading two 0s can be omitted, such as (5th block):
2001:0000:3238:DFE1:63:0000:0000:FEFB
Rule:2 If two of more blocks contains consecutive zeroes, omit them all and replace with double colon sign ::,
such as (6th and 7th block):
2001:0000:3238:DFE1:63::FEFB
Consecutive blocks of zeroes can be replaced only once by :: so if there are still blocks of zeroes in the address
they can be shrink down to single zero, such as (2nd block):
2001:0:3238:DFE1:63::FEFB
Interface ID
IPv6 has three different type of Unicast Address scheme. The second half of the address (last 64 bits) is always
used for Interface ID. MAC address of a system is composed of 48-bits and represented in Hexadecimal. MAC
address is considered to be uniquely assigned worldwide. Interface ID takes advantage of this uniqueness of
MAC addresses. A host can auto-configure its Interface ID by using IEEE‟s Extended Unique Identifier (EUI-64)
format. First, a Host divides its own MAC address into two 24-bits halves. Then 16-bit Hex value 0xFFFE is
sandwiched into those two halves of MAC address, resulting in 64-bit Interface ID.
[Image: EUI-64 Interface ID]
15. TUTORIALS POINT
Simply Easy Learning
Global Unicast Address
This address type is equivalent to IPv4‟s public address. Global Unicast addresses in IPv6 are globally identifiable
and uniquely addressable.
[Image: Global Unicast Address]
Global Routing Prefix: The most significant 48-bits are designated as Global Routing Prefix which is assigned to
specific Autonomous System. Three most significant bits of Global Routing Prefix is always set to 001.
Link-Local Address
Auto-configured IPv6 address is known as Link-Local address. This address always starts with FE80. First 16 bits
of Link-Local address is always set to 1111 1110 1000 0000 (FE80). Next 48-bits are set to 0, thus:
[Image: Link-Local Address]
Link-Local addresses are used for communication among IPv6 hosts on a link (broadcast segment) only. These
addresses are not routable so a Router never forwards these addresses outside the link.
Unique-Local Address
This type of IPv6 address which is though globally unique, but it should be used in local communication. This
address has second half of Interface ID and first half is divided among Prefix, Local Bit, Global ID and Subnet ID.
[Image: Unique-Local Address]
Prefix is always set to 1111 110. L bit, which is set to 1 if the address is locally assigned. So far the meaning of L
bit to 0 is not defined. Therefore, Unique Local IPv6 address always starts with „FD‟.
16. TUTORIALS POINT
Simply Easy Learning
SCOPE OF IPV6 UNICAST ADDRESSES:
[Image: IPv6 Unicast Address Scope]
The scope of Link-local address is limited to the segment. Unique Local Address are though locally global but are
not routed over the Internet, limiting their scope to an organization‟s boundary. Global Unicast addresses are
globally unique and recognizable. They shall make the essence of Internet v2 addressing.
17. TUTORIALS POINT
Simply Easy Learning
IPv6 - Special Addresses
Version 6 has slightly complex structure of IP address than that of IPv4. IPv6 has reserved few
addresses and address notations for special purposes. See the table below:
Special Addresses:
As shown in the table above 0:0:0:0:0:0:0:0/128 address does not specify to anything and is said to be an
unspecified address. After simplifying, all 0s are compacted to ::/128.
In IPv4, address 0.0.0.0 with netmask 0.0.0.0 represents default route. The same concept is also applie to
IPv6, address 0:0:0:0:0:0:0:0 with netmask all 0s represents default route. After applying IPv6 simplying rule
this address is compressed to ::/0.
Loopback addresses in IPv4 are represented by 127.0.0.1 to 127.255.255.255 series. But in IPv6, only
0:0:0:0:0:0:0:1/128 address represents Loopback address. After simplying loopback address, it can be
represented as ::1/128.
Reserved Multicast Address for Routing Protocols:
The above table shows reserved multicast addresses used by interior routing protocol.
All addresses are reserved in similar IPv4 fashion
CHAPTER
5
18. TUTORIALS POINT
Simply Easy Learning
Reserved Multicast Address for Routers/Node:
These addresses helps routers and hosts to speak to available routers and hosts on a segment without being
configured with an IPv6 address. Hosts use EUI-64 based auto-configuration to self-configure an IPv6 address
and then speaks to available hosts/routers on the segment by means of these addresses.
19. TUTORIALS POINT
Simply Easy Learning
IPv6 - Headers
The wonder of IPv6 lies in its header. IPv6 address is 4 times larger than IPv4 but the IPv6 header is only 2
times larger than that of IPv4. IPv6 headers have one Fixed Header and zero or more Optional (Extension)
Headers. All necessary information which is essential for a router is kept in Fixed Header. Extension Header
contains optional information which helps routers to understand how to handle a packet/flow.
Fixed Header
[Image: IPv6 Fixed Header]
IPv6 fixed header is 40 bytes long and contains the following information.
S.N. Field & Description
1 Version (4-bits): This represents the version of Internet Protocol, i.e. 0110.
2
Traffic Class (8-bits): These 8 bits are divided into two parts. Most significant 6 bits are used for Type of
Service, which tells the Router what services should be provided to this packet. Least significant 2 bits are
used for Explicit Congestion Notification (ECN).
3
Flow Label (20-bits): This label is used to maintain the sequential flow of the packets belonging to a
communication. The source labels the sequence which helps the router to identify that this packet belongs
to a specific flow of information. This field helps to avoid re-ordering of data packets. It is designed for
streaming/real-time media.
CHAPTER
6
20. TUTORIALS POINT
Simply Easy Learning
4
Payload Length (16-bits): This field is used to tell the routers how much information this packet contains
in its payload. Payload is composed of Extension Headers and Upper Layer data. With 16 bits, up to
65535 bytes can be indicated but if Extension Headers contain Hop-by-Hop Extension Header than
payload may exceed 65535 bytes and this field is set to 0.
5
Next Header (8-bits): This field is used to indicate either the type of Extension Header, or if Extension
Header is not present then it indicates the Upper Layer PDU. The values for the type of Upper Layer PDU
is same as IPv4‟s.
6
Hop Limit (8-bits): This field is used to stop packet to loop in the network infinitely. This is same as TTL in
IPv4. The value of Hop Limit field is decremented by 1 as it passes a link (router/hop). When the field
reaches 0 the packet is discarded.
7 Source Address (128-bits): This field indicates the address of originator of the packet.
8 Destination Address (128-bits): This field provides the address of intended recipient of the packet.
Extension Headers
In IPv6, the Fixed Header contains only information which is necessary and avoiding information which is either not
required or is rarely used. All such information, is put between the Fixed Header and Upper layer header in the
form of Extension Headers. Each Extension Header is identified by a distinct value.
When Extension Headers are used, IPv6 Fixed Header‟s Next Header field points to the first Extension Header. If
there is one more Extension Header, then first Extension Header‟s „Next-Header‟ field point to the second one, and
so on. The last Extension Header‟s „Next-Header‟ field point to Upper Layer Header. Thus all headers from point to
the next one in a linked list manner.
If the Next Header field contains value 59, it indicates that there‟s no header after this header, not even Upper
Layer Header.
The following Extension Headers must be supported as per RFC 2460:
The sequence of Extension Headers should be:
21. TUTORIALS POINT
Simply Easy Learning
These headers:
1. Should be processed by First and subsequent destinations.
2. Should be processed by Final Destination.
Extension Headers are arranged one after another in a Linked list manner, as depicted in the diagram below:
[Image: Extension Headers Connected Format]
22. TUTORIALS POINT
Simply Easy Learning
IPv6 - Communication
In IPv4, a host which wants to communicate with some other host on the network, needs first to have an IP
address acquired either by means of DHCP or by manual configuration. As soon as a host is equipped with some
valid IP address, it is now able to speak to any host on the subnet. To communicate on layer-3, a host also must
know the IP address of the other host. Communication on a link, is established by means of hardware embedded
MAC Addresses. To know the MAC address of host whose IP address is known, a host sends ARP broadcast
and in revert the intended host sends back its MAC address.
In IPv6, there‟s no broadcast mechanism. It is not a must for an IPv6 enabled host to obtain IP address from
DHCP or manually configured, but it can auto-configure its own IP. Then, how would a host communicates with
others on IPv6 enabled network?
ARP has been replaced by ICMPv6 Neighbor Discovery Protocol.
Neighbor Discovery Protocol
A host in IPv6 network is capable of auto-configuring itself with a unique link-local address. As soon as it is
equipped with an IPv6 address, it joins a number of multicast groups. All communications related to that segment
happens on those multicast addresses only. A host goes through a series of states in IPv6:
Neighbor Solicitation: After configuring all IPv6‟s either manually, or by DHCP Server or by auto-
configuration, the host sends a Neighbor Solicitation message out to FF02::1/16 multicast address for all its
IPv6 addresses in order to know that no one else occupies same addresses.
DAD (Duplicate Address Detection): When the host does not listen from anything from the segment
regarding its Neighbor Solicitation message, it assumes that no duplicate address exists on the segment.
Neighbor Advertisement: After assigning the addresses to its interfaces and making them up and running,
the host once again sends out a Neighbor Advertisement message telling all other hosts on the segment, that
it has assigned those IPv6 addresses to its interfaces.
Once a host is done with the configuration of its IPv6 addresses, it does the following things:
Router Solicitation: A host sends a Router Solicitation multicast packet (FF02::2/16) out on its segment to
know the presence of any router on this segment. This helps the host to configure the router as its default
gateway. If its default gateway router goes down, the host can shift to a new router and makes it the default
gateway.
Router Advertisement: When a router receives a Router Solicitation message, it responses back to the host
advertising its presence on that link.
Redirect: This may be the situation where a Router receives a Router Solicitation request but it knows that it
is not the best gateway for the host. In this situation, the router sends back a Redirect message telling the host
CHAPTER
7
23. TUTORIALS POINT
Simply Easy Learning
that there is a better „next-hop‟ router available. Next-hop is where the host will send its data destined to a host
which does not belong to the same segment.
24. TUTORIALS POINT
Simply Easy Learning
IPv6 - Subnetting
In IPv4, addresses were created in classes. Classful IPv4 addresses clearly defines the bits used for network
prefixes and the bits used for hosts on that network. To subnet in IPv4 we play with the default classful netmask
which allows us to borrow hosts bit to be used as subnet bits. This results in multiple subnets but less hosts per
subnet. That is, when we borrow host bit to create a subnet that costs us in lesser bit to be used for host
addresses.
IPv6 addresses uses 128 bits to represent an address which includes bits to be used for subnetting. Second half
of the address (least significant 64 bits) is always used for Hosts only. Therefore, there is no compromise if we
subnet the network.
[Image: IPv6 Subnetting]
16 Bits of subnet is equivalent to IPv4‟s Class B Network. Using these subnet bits an organization can have more
65 thousands of subnets which is by far, more than enough.
Thus routing prefix is /64 and host portion is 64 bits. We though, can further subnet the network beyond 16 bits of
Subnet ID, borrowing hosts bit but it is recommended that 64 bits should always be used for hosts addresses
because auto-configuration requires 64 bits.
IPv6 subnetting works on the same concept as Variable Length Subnet Masking in IPv4.
/48 prefix can be allocated to an organization providing it the benefit of having up to /64 subnet prefixes, which is
65535 sub-networks, each having 264 hosts. A /64 prefix can be assigned to a point-to-point connection where
there are only two hosts (or IPv6 enabled devices) on a link.
CHAPTER
8
25. TUTORIALS POINT
Simply Easy Learning
IPv6 – IPv4 to IPv6
One problem in transition from IPv4 to IPv6 completely is that IPv6 is not backward compatible. This
results in a situation where either a site is on IPv6 or it is not. Unlike an implementation of new technology where
the newer one is backward compatible so the older system can still work with the newer without any additional
changes.
To overcome this short-coming, there exist few technologies which can be used in slow and smooth transition
from IPv4 to IPv6:
Dual Stack Routers
A router can be installed with both IPv4 and IPv6 addresses configured on its interfaces pointing to the network of
relevant IP scheme.
[Image: Dual Stack Router]
In above diagram, a Server which is having IPv4 as well as IPv6 address configured for it now
can speak with all hosts on IPv4 network and IPv6 network with help of Dual Stack Router. Dual
Stack Router, can communicate with both networks and provides a medium for hosts to access
Server without changing their respective IP version.
CHAPTER
9
26. TUTORIALS POINT
Simply Easy Learning
Tunneling
In a scenario where different IP versions exist on intermediate path or transit network, tunneling provides a better
solution where user‟s data can pass through a non-supported IP version.
[Image:
Tunneling]
The above diagram depicts how two remote IPv4 networks can communicate via Tunnel, where the transit
network was on IPv6. Vice versa is also possible where transit network is on IPv6 and remote sites which intends
to communicate, are on IPv4.
NAT Protocol Translation
This is another important method of transition to IPv6 by means of a NAT-PT (Network Address Translation –
Protocol Translation) enabled device. With help of NAT-PT device, actual conversion happens between IPv4 and
IPv6 packets and vice versa. See the diagram below:
[ Image: NAT - Protocol Translation]
A host with IPv4 address sends a request to IPv6 enabled Server on Internet which does not understand IPv4
address. In this scenario, NAT-PT device can help them communicate. When IPv4 host sends a request packet to
IPv6 Server, NAT-PT device/router, strips down the IPv4 packet, removes IPv4 header and adds IPv6 header and
passes it through the Internet. When a response from IPv6 Server comes for IPv4 host, the router does vice
versa.
27. TUTORIALS POINT
Simply Easy Learning
IPv6 - Mobility
When a host is connected to one link or network, it acquires an IP address and all communication
happens using that IP address on that link. As soon as, the same host changes its physical location, that is,
moves into some different area / subnet / network / link, its IP address changes accordingly and all
communication happening on the host using old IP address, goes down.
IPv6 mobility provides a mechanism which equips a host with an ability to roam around among different links
without losing any communication/connection and its IP address.
Multiple entities are involved in this technology:
Mobile Node: The device which needs IPv6 mobility.
Home Link: This link is configured with the home subnet prefix and this is where the Mobile IPv6 device gets
its Home Address.
Home Address: This is the address which Mobile Node acquires from Home Link. This is permanent
address of Mobile Node. If the Mobile Node remains in the same Home Link, the communication among
various entities happens as usual.
Home Agent: This is a router which acts as registrar for Mobile Nodes. Home Agent is connected to Home
Link and maintains information about all Mobile Nodes, their Home Addresses and their present IP
addresses.
Foreign Link: Any other Link which is not Mobile Node‟s Home Link.
Care-of Address: When a Mobile Node attaches to a Foreign Link, it acquires a new IP address of that
Foreign Link‟s subnet. Home Agent maintains the information of both Home Address and Care-of Address.
Multiple Care-of addresses can be assigned to Mobile Node, but at any instance only one Care-of Address
has binding with Home Address.
Correspondent Node: Any IPv6 enable device which intends to have communication with Mobile Node.
Mobility Operation
When Mobile Node stays in its Home Link, all communications happen on its Home Address. As shown below:
CHAPTER
10
28. TUTORIALS POINT
Simply Easy Learning
[Image:
Mobile Node connected to Home Link]
When Mobile Node leaves its Home Link and is connected to some Foreign Link, the Mobility feature of IPv6
comes into play. After connecting to Foreign Link, Mobile Node acquires an IPv6 address from Foreign Link. This
address is called Care-of Address. Mobile Node sends binding request to its Home Agent with the new Care-of
Address. Home Agent binds Mobile Node‟s Home Address with Care-of Address, establishing a Tunnel between
both.
Whenever a Correspondent Node tries to establish connection with Mobile Node (on its Home Address), the
Home Agent intercepts the packet and forwards to Mobile Node‟s Care-of Address over the Tunnel which was
already established.
[Image:
Mobile Node connected to Foreign Link]
Route Optimization
When a Correspondent Node initiate communication by sending packets to Mobile Node on Home Address, these
packets are tunneled to Mobile Node by Home Agent. In Route Optimization mode, when the Mobile Node
29. TUTORIALS POINT
Simply Easy Learning
receives packet from Correspondent Node, it does not forward replies to Home Agent. Rather it sends its packet
directly to Correspondent Node using Home Address as Source Address. This mode is optional and not used by
default.
30. TUTORIALS POINT
Simply Easy Learning
IPv6 - Routing
Routing concepts remain same in case of IPv6 but almost all routing protocol have been redefined
accordingly. We have seen in Communication in IPv6 segment, how a host speaks to its gateway. Routing is a
process to forward routable data choosing best route among several available routes or path to the destination. A
router is a device which forwards data which is not explicitly destined to it.
There exists two forms of routing protocols
Distance Vector Routing Protocol: A router running distance vector protocol advertises its connected
routes and learns new routes from its neighbors. The routing cost to reach a destination is calculated by
means of hops between the source and destination. A Router generally relies on its neighbor for best path
selection, also known as “routing-by-rumors”. RIP and BGP are Distance Vector Protocols.
Link-State Routing Protocol: This protocol acknowledges the state of a Link and advertises to its
neighbors. Information about new links is learnt from peer routers. After all the routing information has been
converged, Link-State Routing Protocol uses its own algorithm to calculate best path to all available links.
OSPF and IS-IS are link state routing protocols and both uses Djikstra‟s Shortest Path First algorithm.
Routing protocols can be divided in two categories:
Interior Routing Protocol: Protocols in this categories are used within an Autonomous System or
organization to distribute routes among all routers inside its boundary. Examples: RIP, OSPF.
Exterior Routing Protocol: Whereas an Exterior Routing Protocol distributes routing information between
two different Autonomous Systems or organization. Examples: BGP.
Routing protocols
RIPng
RIPng stands for Routing Information Protocol Next Generation. This is an Interior Routing Protocol and is a
Distance Vector Protocol. RIPng has been upgraded to support IPv6.
OSPFv3
Open Shortest Path First version 3 is an Interior Routing Protocol which is modified to support IPv6. This is a
Link-State Protocol and uses Djikrasta‟s Shortest Path First algorithm to calculate best path to all
destinations.
BGPv4
CHAPTER
11
31. TUTORIALS POINT
Simply Easy Learning
BGP stands for Border Gateway Protocol. It is the only open standard Exterior Gateway Protocol available.
BGP is a Distance Vector protocol which takes Autonomous System as calculation metric, instead of number
of routers as Hop. BGPv4 is an upgrade of BGP to support IPv6 routing.
Protocols changed to support IPv6:
ICMPv6: Internet Control Message Protocol version 6 is an upgraded implementation of ICMP to
accommodate IPv6 requirements. This protocol is used for diagnostic functions, error and information
message, statistical purposes. ICMPv6‟s Neighbor Discovery Protocol replaces ARP and helps discover
neighbor and routers on the link.
DHCPv6: Dynamic Host Configuration Protocol version 6 is an implementation of DHCP. Though IPv6
enabled hosts do not require any DHCPv6 Server to acquire IP address as they can be auto-configured.
Neither do they need DHCPv6 to locate DNS server because DNS can be discovered and configured via
ICMPv6 Neighbor Discovery Protocol. Yet DHCPv6 Server can be used to provide these information.
DNS: There has been no new version of DNS but it is now equipped with extensions to provide support for
querying IPv6 addresses. A new AAAA (quad-A) record has been added to reply IPv6 query messages. Now
DNS can reply with both IP versions (4 & 6) without any change in query format.
32. TUTORIALS POINT
Simply Easy Learning
IPv6 - Summary
IPv4 since 1982, has been an undisputed leader of Internet. With IPv4‟s address space exhaustion IPv6 is
now taking over the control of Internet, which is called Internet2.
IPv4 is widely deployed and migration to IPv6 would not be easy. So far IPv6 could penetrate IPv4‟s address
space by less than 1%.
The world has celebrated „World IPv6 Day‟ on June 08, 2011 with a purpose to test IPv6 address over Internet in
full. On June 06, 2012 the Internet community officially launched IPv6. This day all ISPs who were offering IPv6
were to enable it on public domain and were to keep it enable. All the device manufacturer also participated to
offer IPv6 by-default enabled on devices.
This was a step towards encouraging Internet community to migrate to IPv6.
Organizations are provided plenty of ways to migrate from IPv4 to IPv6. Also organization, willing to test IPv6
before migrating completely can run both IPv4 and IPv6 simultaneously. Networks of different IP versions can
communicate and user data can be tunneled to walk to the other side.
Future of IPv6
IPv6 enabled Internet version 2 will replace todays IPv4 enabled Internet. When Internet was launched with IPv4,
developed countries like US and Europe took the larger space of IPv4 for deployment of Internet in their
respective countries keeping future need in mind. But Internet exploded everywhere reaching and connecting
every country of the world increasing the requirement of IPv4 address space. As a result, till this day US and
Europe have many IPv4 address space left with them and countries like India and China are bound to address
their IP space requirement by means of deployment of IPv6.
Most of the IPv6 deployment is being done outside US, Europe. India and China are moving forward to change
their entire space to IPv6. China has announced a five year deployment plan named China Next Generation
Internet.
After June 06, 2012 all major ISPs were shifted to IPv6 and rest of them are still moving.
IPv6 provides ample of address space and is designed to expand today‟s Internet services. Feature-rich IPv6
enabled Internet version 2 may deliver more than expected.
CHAPTER
12