A number of factors are contributing to increases in renewable energy production in the United
States (and beyond). These factors include rapidly declining costs of electricity produced from
renewable energy sources, regulatory and policy obligations and incentives, and moves to reduce
pollution from fossil fuel-based power generation, including greenhouse gas emissions. While
not all renewable energy sources are variable, two such technologies – wind and solar PV –
currently dominate the growth of renewable electricity production. The production from wind
and solar PV tries to capture the freely available but varying amount of wind and solar
irradiance. As the share of electricity produced from variable renewable resources grows, so does
the need to integrate these resources in a cost-effective manner, i.e., to ensure that total
electricity production from all sources including variable renewable generation equals electricity
demand in real time. Also, a future electric system characterized by a rising share of renewable
energy will likely require concurrent changes to the existing transmission and distribution
(T&D) infrastructure. While this report does not delve into that topic, utilities, grid operators
and regulators must carefully plan for needed future investments in T&D, given the lead times
and complexities involved.
Concentrated Solar Thermal Power can be coupled with Thermal Energy Storage using Molten Salts. This presentations offers a compelling argument why this technology will remain competitive despite future improvements in other storage technologies
Grid Management Renewable Energy Balancing Power GenerationBalvinder Singh
Renewable energy sources are intermittent in nature hence; it is therefore a challenging task to integrate renewable energy resources into the power grid.
With overall U.S energy consumption expected to increase 23 percent by 20301 and with growing
requirements for renewable energy, states are seeking to meet new demand with energy sources that are abundant, clean and cost-effective. Wind power
has become a popular clean energy choice due to its price and the distribution of wind resources across the nation. However, with more states requiring an increase in renewable energy production and serious consideration of a national renewable electricity standard growing in Congress, questions have arisen about how much wind power can be integrated into the U.S. energy supply.
Economic viability and profitability assessments of WECS IJECEIAES
Technical and technological advances in alternative energy sources have led many countries to add green energy to their power plants to reduce carbon emissions and air pollution. At present, many electricity companies are looking to use alternative sources of energy because of high electrical energy prices. Wind energy is more useful than many renewable energies such as solar, heat, biomass, etc. The Wind Energy Conversion System (WECS) is a system that converts the kinetic energy of the wind into electrical energy to feed the known loads. WECS can be found in a variety of technology. Climate change and load demand are essential determinants of WECS optimization modelling. In this paper, proposed a strategy focused primarily on economic analysis WECS. The strategy based on a weather change to find the optimal designing and modelling for four different types of WECS using HOMER software. Finally, several criteria were used to determine which type of WECS was the most profitable investment and less payback period.
Integrating Variable Renewable Energy into the Grid key issues and Emerging S...Power System Operation
Introduction
Why is grid integration an important topic?
Trends:
Increasing energy demand
Urbanization
Climate change mitigation targets
Need for grid modernization
Every power system has
characteristics that promote and
inhibit integration of variable RE
Grid integration is the practice of
developing efficient ways to
deliver high penetration levels of
variable RE to the grid
Source:
“Renewable Energy
Futures” 2012
Maintaining Bulk Power System Reliability While Integrating Variable Energy R...Power System Operation
Integrating large quantities of variable energy resources (VERs) (predominantly wind and photovoltaic (PV) solar) into the North American bulk power system (BPS) requires significant changes to electricity system planning and operations to ensure continued reliability of the grid. The purpose of this report is to focus on considerations that all system planners and operators must address to reliably integrate significant quantities of VERs into the BPS. This report highlights the California Independent System Operator Corporation’s (CAISO) current efforts to address these challenges as the issues are imminent in CAISO’s area of operation.
Reliable operation of the grid requires that essential reliability services be present: Inertia – The stored rotating energy in a power system provided by synchronous and induction generation. Frequency Response – The automatic corrective response of the system, typically provided by synchronous generation for balancing demand and supply. Regulation – A service that corrects for short-term fluctuations in electricity use that might affect the stability of the power system. Load-Following – The ability to adjust power output as demand for electricity ramps throughout the day. Active Power Control – The ability to control power output of a given electric resource. Reactive Power and Voltage Control – The ability to control the production and absorption of reactive power for the purposes of maintaining desired voltages and optimizing transmission and generation real-power losses. Disturbance Ride-Through Tolerance – The ability of a resource to remain connected through a system disturbance, such as a large frequency excursion. Steady-State and Dynamic Stability Modeling – The complex power-flow analyses that provide insight into the expected behavior of a power system during normal conditions; also provides insight into systems subjected to disturbances. Load and Generation Forecasting – The tools used to predict demand and nondispatchable resources in a variety of time frames ranging in time period from real time to several decades.
Concentrated Solar Thermal Power can be coupled with Thermal Energy Storage using Molten Salts. This presentations offers a compelling argument why this technology will remain competitive despite future improvements in other storage technologies
Grid Management Renewable Energy Balancing Power GenerationBalvinder Singh
Renewable energy sources are intermittent in nature hence; it is therefore a challenging task to integrate renewable energy resources into the power grid.
With overall U.S energy consumption expected to increase 23 percent by 20301 and with growing
requirements for renewable energy, states are seeking to meet new demand with energy sources that are abundant, clean and cost-effective. Wind power
has become a popular clean energy choice due to its price and the distribution of wind resources across the nation. However, with more states requiring an increase in renewable energy production and serious consideration of a national renewable electricity standard growing in Congress, questions have arisen about how much wind power can be integrated into the U.S. energy supply.
Economic viability and profitability assessments of WECS IJECEIAES
Technical and technological advances in alternative energy sources have led many countries to add green energy to their power plants to reduce carbon emissions and air pollution. At present, many electricity companies are looking to use alternative sources of energy because of high electrical energy prices. Wind energy is more useful than many renewable energies such as solar, heat, biomass, etc. The Wind Energy Conversion System (WECS) is a system that converts the kinetic energy of the wind into electrical energy to feed the known loads. WECS can be found in a variety of technology. Climate change and load demand are essential determinants of WECS optimization modelling. In this paper, proposed a strategy focused primarily on economic analysis WECS. The strategy based on a weather change to find the optimal designing and modelling for four different types of WECS using HOMER software. Finally, several criteria were used to determine which type of WECS was the most profitable investment and less payback period.
Integrating Variable Renewable Energy into the Grid key issues and Emerging S...Power System Operation
Introduction
Why is grid integration an important topic?
Trends:
Increasing energy demand
Urbanization
Climate change mitigation targets
Need for grid modernization
Every power system has
characteristics that promote and
inhibit integration of variable RE
Grid integration is the practice of
developing efficient ways to
deliver high penetration levels of
variable RE to the grid
Source:
“Renewable Energy
Futures” 2012
Maintaining Bulk Power System Reliability While Integrating Variable Energy R...Power System Operation
Integrating large quantities of variable energy resources (VERs) (predominantly wind and photovoltaic (PV) solar) into the North American bulk power system (BPS) requires significant changes to electricity system planning and operations to ensure continued reliability of the grid. The purpose of this report is to focus on considerations that all system planners and operators must address to reliably integrate significant quantities of VERs into the BPS. This report highlights the California Independent System Operator Corporation’s (CAISO) current efforts to address these challenges as the issues are imminent in CAISO’s area of operation.
Reliable operation of the grid requires that essential reliability services be present: Inertia – The stored rotating energy in a power system provided by synchronous and induction generation. Frequency Response – The automatic corrective response of the system, typically provided by synchronous generation for balancing demand and supply. Regulation – A service that corrects for short-term fluctuations in electricity use that might affect the stability of the power system. Load-Following – The ability to adjust power output as demand for electricity ramps throughout the day. Active Power Control – The ability to control power output of a given electric resource. Reactive Power and Voltage Control – The ability to control the production and absorption of reactive power for the purposes of maintaining desired voltages and optimizing transmission and generation real-power losses. Disturbance Ride-Through Tolerance – The ability of a resource to remain connected through a system disturbance, such as a large frequency excursion. Steady-State and Dynamic Stability Modeling – The complex power-flow analyses that provide insight into the expected behavior of a power system during normal conditions; also provides insight into systems subjected to disturbances. Load and Generation Forecasting – The tools used to predict demand and nondispatchable resources in a variety of time frames ranging in time period from real time to several decades.
Dr Gregory Reed, University of Pittsburgh, Swanson School of Engineering, Speaker at the marcus evans Transmission & Distribution Summit Fall 2011 in Wheeling, IL, delivered his presentation on Advanced AC and DC Power Electronics Based Grid Technologies for the Ecosystem of the Future
Relying almost entirely on energy from variable renewable energy sources (vRES) will require a transformation in the way power systems are planned and operated. This report outlines steps for overcoming the challenges in creating power systems with the flexibility needed to maintain system security and reliability while relying primarily on variable energy resources. The work is largely a synthesis of the many reports and studies on this subject. It seeks to summarize that body of work for a less technical audience that will need to put in place the policies, technical changes, and institutional systems necessary to make the power system of the future a reality. For this work we gathered opinions from a dedicated power system flexibility advisory panel, through two meetings, e- mail exchanges, and an online survey.
Multi agent oriented solution for forecasting-based control strategy with loa...Mohamed Ghaieth Abidi
To improve the power supply availability in an island microgrid, this paper proposes a new approach that integrates distributed energy sources economically, reliably and efficiently. In an island mode, a microgrid must ensure its self-sufficiency of energy production since it cannot make an energetic exchange with a main grid. However, in this mode, the random behavior of the resources affected by meteorological factors presents a major constraint. The challenge related to the power availability in microgrids is to find a solution that faces the operation of intermittent power sources. The microgrid should guarantee a useful power management in order to achieve a high availability of energy. In this paper, we present a mathematical model to describe the influence of the meteorological factors on the sources production. We propose a multi-agent control strategy based on the production forecasting and load shedding for a high availability of the microgrid power supply. The proposed multi-agent system uses the master-slave model in which the communication and negotiation between the defined agents are performed by a concept of tokens. The developed control system is implemented on Spartan 6 FPGA-Board. The paper's contribution is applied to a Tunisian petroleum platform where several blackouts are recorded between 2012 and 2014. Simulation and experimental results show clearly a high availability as a performance of the proposed control strategy.
Cullen reducing energy demand EST 2011morosini1952
Reducing Energy Demand: What Are the Practical Limits?
Jonathan M. Cullen, Julian M. Allwood*, and Edward H. Borgstein
Cite this: Environ. Sci. Technol. 2011, 45, 4, 1711–1718
Publication Date:January 12, 2011
https://doi.org/10.1021/es102641n
Abstract
Concern over the global energy system, whether driven by climate change, national security, or fears of shortage, is being discussed widely and in every arena but with a bias toward energy supply options. While demand reduction is often mentioned in passing, it is rarely a priority for implementation, whether through policy or through the search for innovation. This paper aims to draw attention to the opportunity for major reduction in energy demand, by presenting an analysis of how much of current global energy demand could be avoided. Previous work led to a “map” of global energy use that traces the flow of energy from primary sources (fuels or renewable sources), through fuel refinery, electricity generation, and end-use conversion devices, to passive systems and the delivery of final energy services (transport, illumination, and sustenance). The key passive systems are presented here and analyzed through simple engineering models with scalar equations using data based on current global practice. Physically credible options for change to key design parameters are identified and used to predict the energy savings possible for each system. The result demonstrates that 73% of global energy use could be saved by practically achievable design changes to passive systems. This reduction could be increased by further efficiency improvements in conversion devices. A list of the solutions required to achieve these savings is provided.
Utilization of Existing Generation Fleet Using Large Scale Energy Storage Sys...Tu Nguyen
In this work, we developed an optimization framework to evaluate the benefit of large-scale energy storage system (ESS) for utilizing an existing generation fleet that often operates at suboptimal working conditions due to peaky nature of the load. The objective is to find the optimal schedule for thermal units and the ESS that minimizes the daily system operating cost. Case studies are conducted to evaluate the operating cost savings by using ESSs for a utility company in Alaska.
This semi-annual publication features our view of recent significant events and emerging trends in the energy industry. Themed “Unprecedented Uncertainty, Extraordinary Investment,” this issue highlights the continuous challenges faced by the energy and utilities industries as world economic growth remains slow coming out of the current recession. Despite reduced energy demand, aging plants, shifting demand patterns, continued growth of renewable resources, and costly environmental regulations are driving substantial investment needs.
Thomas G. Bourgeois, deputy director of Pace University’s Energy and Climate Center, provided this response for the Dot Earth blog when asked, after the Hurricane Sandy disaster, how distributed generation of electricity and heat could cut disaster impacts and mesh with efforts to develop renewable energy sources in cities.
Related Dot Earth post: http://nyti.ms/U5blIP
Pace Energy and Climate Center:
http://www.law.pace.edu/energy-and-climate-center
A Review on Power Flexibility, Generation and Distribution Systemijtsrd
Distributed power generation is the latest field because of the ability to accommodate various types of Renewable alternative energy sources, its hidden potential to improve the energy efficiency and power system capability, and its promise for power reliability and security. Many distributed energy sources exist such solar energy, fuel cell, micro turbine, and wind energy. Distributed power generation concept has been implemented in various places with various degree of complexity. A comprehensive review on the distributed power generation is presented in this paper. Rahul Gokhle | Pramod Kumar Rathore "A Review on Power Flexibility, Generation and Distribution System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46379.pdf Paper URL : https://www.ijtsrd.com/engineering/electrical-engineering/46379/a-review-on-power-flexibility-generation-and-distribution-system/rahul-gokhle
Matlab Implementation of Power Quality Improvement Based on Fast Dynamic Controlijtsrd
The paper is based on power quality with fast dynamic control having no isolation transformer. The concept is simulated using famous MATLAB tool and the proposed architecture is based on four switching devices only, forming two half bridge voltage source inverters one connected in parallel with the load and another one connected in series with the AC mains and both having the same DC link. Mujeeb Ullah Malik | Nipun Aggarwal "Matlab Implementation of Power Quality Improvement Based on Fast Dynamic Control" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29643.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29643/matlab-implementation-of-power-quality-improvement-based-on-fast-dynamic-control/mujeeb-ullah-malik
This Independent Review into the Future Security of the National Electricity Market Preliminary Report identifies the complex forces driving a rapid transition across the electricity sector. It seeks input on key questions to navigate the transition in line with consumer expectations for a secure and reliable service, at an affordable price, that delivers on our national emissions reduction commitments.
Dr Finkel and the Panel welcome submissions responding to the Preliminary Report. The submission period is open until 21 February 2017.
Dr Gregory Reed, University of Pittsburgh, Swanson School of Engineering, Speaker at the marcus evans Transmission & Distribution Summit Fall 2011 in Wheeling, IL, delivered his presentation on Advanced AC and DC Power Electronics Based Grid Technologies for the Ecosystem of the Future
Relying almost entirely on energy from variable renewable energy sources (vRES) will require a transformation in the way power systems are planned and operated. This report outlines steps for overcoming the challenges in creating power systems with the flexibility needed to maintain system security and reliability while relying primarily on variable energy resources. The work is largely a synthesis of the many reports and studies on this subject. It seeks to summarize that body of work for a less technical audience that will need to put in place the policies, technical changes, and institutional systems necessary to make the power system of the future a reality. For this work we gathered opinions from a dedicated power system flexibility advisory panel, through two meetings, e- mail exchanges, and an online survey.
Multi agent oriented solution for forecasting-based control strategy with loa...Mohamed Ghaieth Abidi
To improve the power supply availability in an island microgrid, this paper proposes a new approach that integrates distributed energy sources economically, reliably and efficiently. In an island mode, a microgrid must ensure its self-sufficiency of energy production since it cannot make an energetic exchange with a main grid. However, in this mode, the random behavior of the resources affected by meteorological factors presents a major constraint. The challenge related to the power availability in microgrids is to find a solution that faces the operation of intermittent power sources. The microgrid should guarantee a useful power management in order to achieve a high availability of energy. In this paper, we present a mathematical model to describe the influence of the meteorological factors on the sources production. We propose a multi-agent control strategy based on the production forecasting and load shedding for a high availability of the microgrid power supply. The proposed multi-agent system uses the master-slave model in which the communication and negotiation between the defined agents are performed by a concept of tokens. The developed control system is implemented on Spartan 6 FPGA-Board. The paper's contribution is applied to a Tunisian petroleum platform where several blackouts are recorded between 2012 and 2014. Simulation and experimental results show clearly a high availability as a performance of the proposed control strategy.
Cullen reducing energy demand EST 2011morosini1952
Reducing Energy Demand: What Are the Practical Limits?
Jonathan M. Cullen, Julian M. Allwood*, and Edward H. Borgstein
Cite this: Environ. Sci. Technol. 2011, 45, 4, 1711–1718
Publication Date:January 12, 2011
https://doi.org/10.1021/es102641n
Abstract
Concern over the global energy system, whether driven by climate change, national security, or fears of shortage, is being discussed widely and in every arena but with a bias toward energy supply options. While demand reduction is often mentioned in passing, it is rarely a priority for implementation, whether through policy or through the search for innovation. This paper aims to draw attention to the opportunity for major reduction in energy demand, by presenting an analysis of how much of current global energy demand could be avoided. Previous work led to a “map” of global energy use that traces the flow of energy from primary sources (fuels or renewable sources), through fuel refinery, electricity generation, and end-use conversion devices, to passive systems and the delivery of final energy services (transport, illumination, and sustenance). The key passive systems are presented here and analyzed through simple engineering models with scalar equations using data based on current global practice. Physically credible options for change to key design parameters are identified and used to predict the energy savings possible for each system. The result demonstrates that 73% of global energy use could be saved by practically achievable design changes to passive systems. This reduction could be increased by further efficiency improvements in conversion devices. A list of the solutions required to achieve these savings is provided.
Utilization of Existing Generation Fleet Using Large Scale Energy Storage Sys...Tu Nguyen
In this work, we developed an optimization framework to evaluate the benefit of large-scale energy storage system (ESS) for utilizing an existing generation fleet that often operates at suboptimal working conditions due to peaky nature of the load. The objective is to find the optimal schedule for thermal units and the ESS that minimizes the daily system operating cost. Case studies are conducted to evaluate the operating cost savings by using ESSs for a utility company in Alaska.
This semi-annual publication features our view of recent significant events and emerging trends in the energy industry. Themed “Unprecedented Uncertainty, Extraordinary Investment,” this issue highlights the continuous challenges faced by the energy and utilities industries as world economic growth remains slow coming out of the current recession. Despite reduced energy demand, aging plants, shifting demand patterns, continued growth of renewable resources, and costly environmental regulations are driving substantial investment needs.
Thomas G. Bourgeois, deputy director of Pace University’s Energy and Climate Center, provided this response for the Dot Earth blog when asked, after the Hurricane Sandy disaster, how distributed generation of electricity and heat could cut disaster impacts and mesh with efforts to develop renewable energy sources in cities.
Related Dot Earth post: http://nyti.ms/U5blIP
Pace Energy and Climate Center:
http://www.law.pace.edu/energy-and-climate-center
A Review on Power Flexibility, Generation and Distribution Systemijtsrd
Distributed power generation is the latest field because of the ability to accommodate various types of Renewable alternative energy sources, its hidden potential to improve the energy efficiency and power system capability, and its promise for power reliability and security. Many distributed energy sources exist such solar energy, fuel cell, micro turbine, and wind energy. Distributed power generation concept has been implemented in various places with various degree of complexity. A comprehensive review on the distributed power generation is presented in this paper. Rahul Gokhle | Pramod Kumar Rathore "A Review on Power Flexibility, Generation and Distribution System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd46379.pdf Paper URL : https://www.ijtsrd.com/engineering/electrical-engineering/46379/a-review-on-power-flexibility-generation-and-distribution-system/rahul-gokhle
Matlab Implementation of Power Quality Improvement Based on Fast Dynamic Controlijtsrd
The paper is based on power quality with fast dynamic control having no isolation transformer. The concept is simulated using famous MATLAB tool and the proposed architecture is based on four switching devices only, forming two half bridge voltage source inverters one connected in parallel with the load and another one connected in series with the AC mains and both having the same DC link. Mujeeb Ullah Malik | Nipun Aggarwal "Matlab Implementation of Power Quality Improvement Based on Fast Dynamic Control" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-1 , December 2019, URL: https://www.ijtsrd.com/papers/ijtsrd29643.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/29643/matlab-implementation-of-power-quality-improvement-based-on-fast-dynamic-control/mujeeb-ullah-malik
This Independent Review into the Future Security of the National Electricity Market Preliminary Report identifies the complex forces driving a rapid transition across the electricity sector. It seeks input on key questions to navigate the transition in line with consumer expectations for a secure and reliable service, at an affordable price, that delivers on our national emissions reduction commitments.
Dr Finkel and the Panel welcome submissions responding to the Preliminary Report. The submission period is open until 21 February 2017.
Reviewing the factors of the Renewable Energy systems for Improving the Energ...IJERA Editor
Electricity demand around the globe has increased alarmingly and is increasing at high rates. Therefore,
electricity supply by the conventional resources is not sufficient right now and the generation of electricity by
these resources is causing pollution worldwide. As the recent world is moving towards the alternative and
renewable resources of energy that include sun, wind, water, and air. This paper focuses on reviewing the
renewable energy sources used to improve the energy efficiency. This paper presents how the maximum power
generation capacity can be achieved using these sources. Main focus of this paper is on solar and wind power
that is freely available all around the globe. This paper concludes that there are certain factors that should be
considered while generating power from these sources. The factors include the calculation of radiation data,
storage size and capacity calculation, and geographic dispersion of the plants.
Overview of Variable Renewable Energy Regulatory IssuesLeonardo ENERGY
Highlights:
* Focuses on key regulatory issues associated with the deployment of VRE sources, especially wind and solar power.
* Charts progression of regulatory issues across early, intermediate, and advanced stages of VRE penetration.
* Common thread of progression is interdependency between facilitating new VRE generation, ensuring adequate grid infrastructure, and ensuring short- and long-term security of supply.
* Key to VRE deployment is integration of all significant changes to a power system.
* VRE integration is a complex issue, involving various actors, assets, and feedback loops.
The concept of injecting photovoltaic power into the utility grid has earned widespread acceptance in these days of renewable energy generation & distribution. Grid-connected inverters have evolved significantly with high diversity. Efficiency, size, weight, reliability etc. have all improved significantly with the development of modern and innovative inverter configurations and these factors have influenced the cost of producing inverters. This paper presents a literature review of the recent technological developments and trends in the Grid-Connected Photovoltaic Systems (GCPVS). In countries with high penetration of Distributed Generation (DG) resources, GCPVS have been shown to cause unwanted stress on the electrical grid. A review of the existing and future standards that addresses the technical challenges associated with the growing number of GCPVS is presented. Maximum Power Point Tracking (MPPT), Solar Tracking (ST) and the use of transform-less inverters can all lead to high efficiency gains of Photovoltaic (PV) systems while ensuring minimal interference with the grid. Inverters that support ancillary services like reactive power control, frequency regulation and energy storage are critical for mitigating the challenges caused by the growing adoption of GCPVS. Anjali | Gourav Sharma"A Review on Grid-Connected PV System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-1 | Issue-4 , June 2017, URL: http://www.ijtsrd.com/papers/ijtsrd2195.pdf http://www.ijtsrd.com/engineering/electrical-engineering/2195/a-review-on-grid-connected-pv-system/anjali
Challenges and Benefits of Integrating the Renewable Energy Technologies into...Power System Operation
In the recent decent, renewable energy has been becoming one of the independent energy sources in human life, and it will be a major resources for the future generation of power. Today, some people tend to use renewable energy in their home or land such as solar or wind energy. Most of those have two inputs of the power source; the utility power supply and renewable energy power supply, so the integration of renewable technologies variable generation sources within Ac grid has been made, but this connection is not easily reachable. This paper will be reviewed the challenges and benefits of integrating renewable energy into power system grid. A review of the integration process will be introduced. Also, the paper will discuss some difficulties that face the integration such as power quality requirements that must be achieved to get this connection successfully. Forecasting of renewable energy such availability of power at any time, the amount of variation in power output, the speed of variation, and the location of RE source are other challenges that may obstruct the successful incorporation of renewable energy and the grid. In addition, the paper will briefly show a device that can be used in homes to achieve this connection. Finally, advantages of the integration for both the power utility and the green energy owner will be present, and how this integration can affect our environment. Solar energy and wind energy will be used in this paper as examples of renewable energy. Keywords: grid, green energy, integration, global warming, renewable energy RE
Impacts of Demand Side Management on System Reliability Evaluationinventy
Electricity demand in Saudi Arabia is steadily increasing as electrical loads grows at a rate of about 7% per year, this represents a high rate by all standards, and largely due to population growth, as well as due to government subsidies which may lead to prices much lower than actual production cost. This growth represents a challenge that requires Saudi Electricity Company (SEC) to invest huge amounts of money every year, for the construction of additional generation capacity along with the reinforcement of transmission network to meet the consumption growth.Also the demand varies frequently throughout the day, causing a waste of a large part of the energy. SEC believes the optimum solution lies in altering the load shape in order to have a better balance between customer’s consumption and SEC’s generation, This paper describes the method for improving the power system reliability by shifting the portion of peak load to off-peak periods This load management scheme can be achieved by lifting the generation during off peak periods and utilizing the stored energy during peak periods. A hybrid set up involving solar and wind energy along with batteries can also be used to store energy and utilize it during peak periods.
System operators face a proliferation of power electronics
interfaced devices such as HVDC transmission lines,
wind and solar generation in their grids. Depending on
the jurisdiction, the instantaneous share of electrical
energy produced from renewable energy sources
occasionally reaches 150%. However, to operate a power
system with sustained high levels of renewable energy,
several operational challenges need to be addressed. The
goal of this survey paper, which is one of the products
of CIGRE joint working group C2/B4.38, is to identify
such challenges. To this extend, extensive literature
review and survey among and discussions with system
operators throughout the world were performed.
This paper identified several operational challenges that
were validated by system operators. These challenges
are grouped in the following three categories: (i) new
behavior of the power system, (ii) new operation of the
power system and (iii) lack of voltage and frequency
support. For each of the identified challenge, a
description, practical examples and relevant references
are provided.
A Review on Integration of Wind Turbines in Distributed Generation Power Systemijtsrd
Wind power is one of the mostly used renewable source of energy generated in recent decades. To be systems that are directly connected to the grid system, it is important to use the high voltage and get the high voltage converted from the turbine. Energy storage is needed to operate the electrical system efficiently. These storage areas are continuously controlled to coincide with the generation and operation of the system and, thus, to maintain the electrical frequency in prescribed limits. They are usually provided with standard integrated composite units such as hydraulic or thermal power plants. With the continuous depletion of these generating plants for non synchronous power plants e.g. wind and solar the rate of saturation of the synchronization power in the system decreases. Speed instability of wind presents the incredible difficulty of planning the wind power available in advance. For this reason, the purpose of this paper is to introduce the techniques developed in recent years and, as such, provide a control solution that mimics the conditions of various wind turbines. Aman Malik | Kavita Sharma "A Review on Integration of Wind Turbines in Distributed Generation Power System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33302.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/33302/a-review-on-integration-of-wind-turbines-in-distributed-generation-power-system/aman-malik
High Efficiency - A Green Revolution In Dc PowerEltek
An Eltek Valere Whitepaper:
How a revolution in DC Power Systems can reduce electricity usage and carbon emissions.
energy for the Telecom Industry.
For more information, visit www.eltekvalere.com
100% Renewables Study has limited Relevance for Carbon Policybobprocter
This paper compares the work by Mark Jacobson et al. of 100% renewables to the rigors of long-run utility system planning. This comparison to integrated resource planning (IRP) allows comparison between assumptions used by Jacobson to results from real-world planning studies. Seven criteria are proposed for designing such a study.
Analysis of Various Power Quality Issues of Wind Solar System – A Reviewijtsrd
This paper presents a review on grid Integration and power quality issues associated with the integration of renewable energy systems in to grid and Role of power electronic devices and Flexible AC Transmission Systems related to these Issues. In this paper, recent trends in power electronics for the integration of wind and photovoltaic PV power generators are presented. Discussions about common and future trends in renewable energy systems based on reliability and maturity of each technology are presented. Classification of various Power Quality Issues used by different researchers has been done and put for reference. Application of various techniques as applied to mitigate the different Power Quality problems is also presented for consideration. Power Electronics interface not only plays a very important role in efficient integration of Wind and Solar energy system but also to its effects on the power system operation especially where the renewable energy source constitutes a significant part of the total system capacity.However there are various issues related to grid integration of RES keeping in the view of aforesaid trends it becomes necessary to investigate the possible solutions for these issues. Nitish Agrawal | Dr. Manju Gupta | Neeti Dugaya "Analysis of Various Power Quality Issues of Wind/Solar System – A Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-1 , December 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47909.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/47909/analysis-of-various-power-quality-issues-of-windsolar-system-–-a-review/nitish-agrawal
Thermography test of electrical panels Thermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panelThermography test of electrical panel
What does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving meanWhat does peak shaving mean
Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide Power System Restoration Guide
Big data analytics Big data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analyticsBig data analytics
Special Protection Scheme Remedial Action Scheme
SPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action SchemeSPS to RAS Special Protection Scheme Remedial Action Scheme
SVC PLUS Frequency Stabilizer Frequency and voltage support for dynamic grid...Power System Operation
SVC PLUS
Frequency Stabilizer
Frequency and voltage support for dynamic grid stability
SVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer FrequencySVC PLUS Frequency Stabilizer Frequency
What is load management What is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load managementWhat is load management
What does merit order mean What does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order meanWhat does merit order mean
What are
Balancing Services ? What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?What are Balancing Services ?
The Need for Enhanced Power System Modelling Techniques & Simulation Tools Power System Operation
The Need for Enhanced Power System Modelling Techniques & Simulation Tools The Need for Enhanced Power System Modelling Techniques The Need for Enhanced Power System Modelling Techniques & Simulation Tools The Need for Enhanced Power System Modelling Techniques & Simulation Tools & Simulation Tools
Power Quality Trends in the Transition to Carbon-Free Electrical Energy SystemPower System Operation
Power Quality
Trends in the Transition to
Carbon-Free Electrical Energy System Carbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy SystemCarbon-Free Electrical Energy System
Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA Power Purchase Agreement PPA
Harmonic study and analysis Harmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysisHarmonic study and analysis
What is leakage current testing What is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testingWhat is leakage current testing
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Integrating Renewable Energy into the Electricity Grid
1. Integrating Renewable Energy into the
Electricity Grid
Case studies showing how system operators
are maintaining reliability
PREPARED FOR
Advanced Energy Economy Institute
PREPARED BY
Jurgen Weiss, PhD
Bruce Tsuchida
June 2015
3. 1 | brattle.com
Table of Contents
I. Executive Summary.....................................................................................................................3
II. Introduction.................................................................................................................................6
III. Trends in Renewable Integration in the United States.............................................................7
IV. Integrating Renewable Energy in ERCOT...............................................................................11
A. Nodal Pricing Market As Enabler ...................................................................................12
B. CREZ Lines To Lower Wind Curtailment......................................................................13
C. Improved Calculation of the Capacity Contribution of Wind ......................................14
D. Advances In Wind Forecasting .......................................................................................15
E. Technological Improvement of Renewable Sources......................................................16
F. Redesign of Ancillary Services ........................................................................................16
G. Demand Response............................................................................................................17
H. Pilot Projects in ERCOT ..................................................................................................20
V. Integrating Renewable Energy at Xcel Energy Colorado........................................................21
A. Change in Ancillary Services Requirements ..................................................................22
B. Advanced Wind Forecasts ...............................................................................................24
C. Advanced Operations.......................................................................................................25
VI. Other Innovative Approaches to Integrating Renewables......................................................26
VII. Conclusions................................................................................................................................30
VIII. Acronyms...................................................................................................................................32
IX. Bibliography...............................................................................................................................34
5. 3 | brattle.com
I. Executive Summary
A number of factors are contributing to increases in renewable energy production in the United
States (and beyond). These factors include rapidly declining costs of electricity produced from
renewable energy sources, regulatory and policy obligations and incentives, and moves to reduce
pollution from fossil fuel-based power generation, including greenhouse gas emissions. While
not all renewable energy sources are variable, two such technologies – wind and solar PV –
currently dominate the growth of renewable electricity production. The production from wind
and solar PV tries to capture the freely available but varying amount of wind and solar
irradiance. As the share of electricity produced from variable renewable resources grows, so does
the need to integrate these resources in a cost-effective manner, i.e., to ensure that total
electricity production from all sources including variable renewable generation equals electricity
demand in real time. Also, a future electric system characterized by a rising share of renewable
energy will likely require concurrent changes to the existing transmission and distribution
(T&D) infrastructure. While this report does not delve into that topic, utilities, grid operators
and regulators must carefully plan for needed future investments in T&D, given the lead times
and complexities involved.
Rather, this report focuses on the fact that variable renewable generation adds a different new
component to the challenges facing system operators in maintaining system reliability. For
example, the decline in solar production at the end of the day can lead to significant ramping
needs for grid operators. Dispatchable non-solar resources (existing fossil and hydro generation
but also potentially demand resources) must be rapidly deployed to make up for the decline in
solar PV generation at the same time that residential electricity demand is rising at the end of the
day. Similar challenges can arise as a consequence of deviations in output from wind or solar
facilities relative to weather forecasts over time periods ranging from minutes to hours.
The question of integrating higher levels of variable renewable generation has recently been
highlighted in the context of the U.S. Environmental Protection Agency’s proposed Clean Power
Plan. An Initial Reliability Review (IRR)1 of the Clean Power Plan conducted by the North
American Electric Reliability Corporation (NERC) raised concerns about the levels of renewable
energy generation incorporated into EPA’s assumptions about what states could be expected to
do to reduce greenhouse gas emissions. In an assessment of that IRR prepared for the Advanced
Energy Economy Institute (AEEI), we found that NERC’s reliability concerns related to
renewable energy integration were likely overstated, given the levels of renewable energy
penetration already managed with no measurable compromise of reliability in some parts of the
United States as well as in Europe.2 As a follow-up to that assessment, we have been asked by
AEEI to provide an overview of what utilities and independent system operators (ISOs) with
1 NERC, Potential Reliability Impacts of EPA’s Proposed Clean Power Plan, Initial Reliability Review,
November 2014.
2 Jurgen Weiss, Bruce Tsuchida, Michael Hagerty and Will Gorman, EPA’s Clean Power Plan and
Reliability: Assessing NERC’s Initial Reliability Review, The Brattle Group, February 2015.
6. 4 | brattle.com
relatively high shares of variable renewable generation are doing to integrate those resources into
their systems without compromising reliability.
A survey of integration efforts in the United States and abroad reveals that the last decade has
seen both a rapid increase in the deployment of variable renewable generation and
improvements in their integration.3 ISOs and utilities have at their disposal a large and
increasing portfolio of options to accommodate large and growing shares of renewable generation
while maintaining high levels of reliability. The options range from purely operational changes
to possibilities that become available as a consequence of advancements in technology unrelated
to renewable energy. Examples of the former include enhancing the coordination between
balancing areas (including increasing their size), reinforcing the transmission system, and
increasing participation of demand response. Examples of the latter include technological
advances in weather forecasting, which, together with better data on historical performance of
renewable energy, allows significantly improved forecasting accuracy of renewable generation;
the proliferation of smarter infrastructure, much of it deployed at the customer site (smart
meters, smart thermostats, smart appliances, all enabled by smarter software), enabling
participation of increasing amounts of demand in activities that help mitigate the variability of
renewable generation; and technological advances of renewable and complementary
technologies (inverters, batteries) that allow renewable generators themselves to contribute to
maintaining reliability.
In this report, we provide two in-depth case studies, of the Electric Reliability Council of Texas
(ERCOT) and Xcel Energy Colorado (a.k.a. Public Service Company of Colorado, or PSCo), to
show how they integrate high shares of variable renewable energy. ERCOT (and the distribution
utilities in ERCOT) and Xcel Energy Colorado have managed to successfully integrate increasing
amounts of variable renewable energy resources at costs that have generally been small to
modest.4 For example, ERCOT estimated the cost of integrating its first 10,000 MW of wind,
approximately the capacity currently deployed, to be about $0.50 per MWh of wind generation.5
These organizations have used well-established and widely available methods and technologies
such as:
o changes in ancillary services, which manage short-term mismatches between electric
supply and demand, with fast-ramping gas-fired generation, demand response, storage,
and other technologies,
3 For a recent survey of wind integration costs, see AWEA, Wind energy helps build a more reliable
and balanced electricity portfolio.
4 Throughout this report, integration costs do not include the costs of building new transmission,
whether for the explicit purpose of connecting more renewable resources or for broader reasons.
5 Milligan et al., Review and Status of Wind Integration and Transmission in the United States: Key
Issues and Lessons Learned, NREL, March 2015, p.25. The cost estimate is based on an assessment of
incremental spinning and non-spinning reserves required to manage both variability and uncertainty
of wind production.
7. 5 | brattle.com
o improved forecasting of production from wind,
o increased flexibility of fossil power plants on the system,
o evolving capabilities of renewable generation itself to contribute to reliability,
o expansion of transmission infrastructure (even though not an “integration measure”
according to our use of the term), and
o newer approaches under development, which include utilizing large-scale storage,
dynamically managing the capacity of transmission lines, and allowing demand response
to play a bigger role in managing system variability (and emergency situations).
The success to date of ERCOT and Xcel Energy Colorado shows that integrating variable
renewable energy at penetration levels of 10-20% on average and at times above 50% – i.e., high
relative to the current levels in most of the United States – is possible. Integration challenges in
other parts of the United States will differ due to both the mix of renewable resources and the
make-up of the existing electric system. Nonetheless, by adopting approaches similar to those
used (or planned) in ERCOT and Xcel Energy Colorado, ISOs/RTOs and utilities in other states
should be able to integrate increasing shares of variable renewable generation using well-
established tools and technologies. While infrastructure changes will likely be necessary in the
longer term, the shorter-term integration challenges in many cases can be addressed with modest
operational changes.
Ongoing technological progress and ongoing learning by utility and ISO/RTO managers about
best practices of managing the operations of electric systems with high renewable shares will
likely allow the integration not only of the levels of variable renewable energy capacity now in
places like Texas and Colorado but even larger amounts in the future. Specifically, integration of
variable renewable energy at levels of penetration as high as those reliably managed by ERCOT
and Xcel Energy Colorado, if not higher, should not be seen as a significant technical obstacle to
compliance with EPA’s proposed Clean Power Plan. Rather, carefully examining the lessons
learned in states and regions such as the ones examined here should help ISOs and utilities
ensure that significantly larger amounts of variable renewable energy can be integrated at small
to modest costs while maintaining high levels of reliability.
8. 6 | brattle.com
II. Introduction
A number of factors are contributing to increases in renewable energy production. They include
declining costs of electricity produced from renewable energy sources, regulatory and policy
obligations and incentives, and moves to reduce pollution from fossil fuel-based power
generation, including greenhouse gas emissions. While not all renewable energy sources are
variable, wind and solar PV currently dominate the growth of renewable electricity production
and their production tries to capture the freely available but varying amount of wind and solar
irradiance. As the share of electricity produced from variable renewable resources grows, so does
the need to integrate these resources at the lowest possible cost. Also, a future electric system
characterized by a rising share of renewable energy will likely require concurrent changes to the
existing transmission and distribution (T&D) infrastructure. While this report does not delve into
that topic, utilities, grid operators and regulators must carefully plan for needed future
investments in T&D, given the lead times and complexities involved.
Recently, the question of integrating higher levels of variable renewable generation has come up
in the context of the U.S. Environmental Protection Agency’s proposed Clean Power Plan. An
Initial Reliability Review (IRR) of the Clean Power Plan conducted by the North American
Electric Reliability Corporation (NERC) raised concerns about the levels of renewable energy
generation incorporated into EPA’s assumptions about what states could be expected to do to
reduce greenhouse gas emissions. In an assessment of that IRR prepared for the Advanced
Energy Economy Institute (AEEI), we found that NERC’s concerns about reliability were likely
overstated, given the levels of renewable energy penetration already managed with no
compromise of reliability in some parts of this country as well as in Europe.6 In that assessment,
we noted a number of technological and operational tools system operators were using to
maintain reliability while managing systems with significant amounts of variable renewable
generation.
As a follow-up, AEEI has asked us to examine how system operators in the United States facing
relatively high shares of variable renewable generation have adopted planning and operational
practices to integrate renewable energy. They also asked to what extent technology, broadly
speaking, has enabled larger contributions from renewable energy sources to the U.S. electricity
supply without negatively impacting electric reliability. These technological impacts can be
direct, by providing tools to help manage a more variable system (such as by deploying relatively
small-scale storage), and indirect, by making possible changes in operational practices and
market design also aimed at integrating renewables. Examples of the latter include advances in
computing that improve forecasting, advances in inverter technology that allow more control
over the output of non-synchronous generation (such as wind and solar PV) and hence their
potential participation in redefined ancillary services markets, or advances in demand response
and storage that enable the creation of entirely new ancillary services. We explored these issues
6 Jurgen Weiss, Bruce Tsuchida, Michael Hagerty and Will Gorman, EPA’s Clean Power Plan and
Reliability: Assessing NERC’s Initial Reliability Review, The Brattle Group, February 2015.
9. 7 | brattle.com
by highlighting case studies of successful integration of relatively high levels of variable
renewable generation, specifically focusing on renewable integration efforts in the Electric
Reliability Council of Texas (ERCOT) and Xcel Energy Colorado.
ERCOT operates the smallest of the three independent interconnections in the United States and
functions as the independent system operator (ISO) for nearly all of Texas. ERCOT is only
weakly connected to surrounding electric systems, has very little hydro generation capacity and
Texas has the highest installed wind capacity of any state with 12.5 GW installed. Xcel Energy
Colorado operates a vertically integrated electric system with significant installed wind (and
increasingly solar PV) capacity, but is not part of a regional transmission organization (RTO) or
ISO. Wind meets close to 20% of Xcel Energy Colorado’s load on average and wind generation at
times exceeds 50% of its instantaneous demand.7 Both systems provide a preview of a potential
future with a higher share of variable renewable generation in the United States. It is noteworthy
that both systems have achieved the integration of higher renewable penetration using
traditional and well-established processes, tools and technologies rather than relying heavily on
new or emerging technologies.
In this report, we first summarize recent trends in renewable energy capacity and the knowledge
of how to integrate renewable energy production. Then we discuss in detail integration measures
planned or implemented in ERCOT and Xcel Energy Colorado. Finally, we highlight integration
measures in other areas in a more summary fashion and provide some concluding remarks.
III. Trends in Renewable Integration in the United States
As shown in Figures 1 and 2, over the past decade wind capacity in the United States has
increased tenfold and solar PV capacity almost hundredfold over the same time period. Over the
same past decade, the share of solar PV and wind in total energy production has increased from
about 0.4% in 2005 to 4.8% in 2014.8 Nonetheless, a 2013 study demonstrated that wind
generation in the United States still played a relatively minor role when compared to the
contribution of wind in other countries. As shown in Figure 3, wind in the U.S. still contributes a
relatively small share to overall electricity production when compared to the 15-40%
contribution in several other (European) countries.9
7 In May 24, 2013, wind provided electricity equivalent to 60.5% of Colorado’s total demand, eclipsing
an earlier record of 56.7%. See http://www.aweablog.org/xcel-colorado-sets-u-s-record-with-over-60-
wind/.
8 U.S. Energy Information Administration, Electric Power Monthly, March 2015.
9 In 2014, wind contributed 39.1% to Denmark’s electricity production (http://www.euractiv.com/
sections/energy/denmark-sets-world-record-wind-energy-311083). Solar PV and on- and off-shore
wind produced a little less than 15% of Germany’s total electricity in 2014 (http://www.unendlich-
viel-energie.de/strommix-deutschland-2014).
10. 8 | brattle.com
Figure 1: Onshore Wind Installations in the United States since 2000
Source: AWEA, NREL
Figure 2: Solar PV Installations in the United States since 2000
Source: SEIA, U.S. Solar Market Insight, 2014 Year in Review, Executive Summary
11. 9 | brattle.com
Figure 3: Wind Share in Total Electricity Production in Selected Countries
(Incremental Wind Penetration above 2006 Levels)
Source: NREL, 2013 Wind Technologies Market Report (reproduced from Figure 4)
In the United States itself, the contribution of both wind and solar differs significantly by state,
with nine states approaching the penetration levels seen in those European countries with the
highest penetration levels.10 As renewable energy production has grown, so has the number of
renewable integration cost studies and associated estimates of integration costs. Figure 4 shows
these estimates of wind integration costs across a number of these studies.
Figure 4 allows several observations. First, the estimated cost of integrating wind differs
significantly across studies. While the bulk of estimates for wind penetration levels below 20% of
peak load11 lie between $2-$5/MWh, there are several studies estimating costs in the $6-
$11/MWh range. The range of estimated integration costs is wider at higher penetration levels. A
second observation is that on average, estimates of integration costs seem to be non-increasing
over time even as wind penetration is increasing.12 Changing natural gas prices are likely one
important reason, but it is also likely that progress is being made in understanding operating and
capacity reserve requirements and minimizing costs by using a mix of better analytical tools and
technology. In other words, electricity analysts, and RTO and utility operators have improved
the methodologies for estimating integration costs, and helped expand the operational (and
technology) options available for renewables integration.
10 In 2013, nine states had wind and solar generation in excess of 10% of total demand: Iowa, South
Dakota, Kansas, Idaho, Minnesota, North Dakota, Oklahoma, Colorado and Oregon (EIA,
http://www.eia.gov/electricity/data/state/).
11 Figure 4 reports integration cost as a function of increasing capacity as a percentage of peak load,
rather than the more typically reported wind generation as a percentage of total demand. For example,
ERCOT’s highest historic peak load was 68,305 MW. 11,154 MW of wind installed as of February
Continued on next page
12. 10 | brattle.com
Figure 4: Wind Integration Levels and Costs across States and Years
Source: NREL, 2013 Wind Technologies Market Report (reproduced from Figure 52)
A recent NREL report summarizes the key issues and lessons learned from integration studies
and operational practices.13 In reviewing a number of both U.S. and international renewables
integration studies, NREL identifies several key lessons learned. They include evidence that
integration of large amounts of wind energy, up to 30% of total generation, is technically and
economically feasible, with integration costs generally less than 10% of the cost per MWh of
wind and often significantly less.14 It also appears that accumulated experience with increasing
shares of renewable generation has led to many industry participants to revise their beliefs
regarding the level of renewable generation would lead to excessive integration cost or
potentially threaten system reliability.
Continued from previous page
2015 implies a penetration rate of 16.3% (for comparison with Figure 4) rather than the approximately
10% of energy provided by wind in ERCOT in 2014.
12 Integration cost estimates in the same region differ quite significantly year by year. For example, the
integration cost estimates for Pacificorp moved from approximately $4.5/MWh at capacity penetration
rates of about 10% in 2005 to about $5/MWh at 18% penetration in 2007, to between $9-10/MWh at
15-18% penetration rates in 2010, to $2/MWh at penetration rates slightly above 20% in 2012.
13 Milligan et al, Review and Status of Wind Integration and Transmission in the United States: Key
Issues and Lessons Learned, NREL, March 2015. The large scale integration studies examined include
three NREL studies (Western Wind and Solar Integration Study Phase 1 and Phase 2 and the Eastern
Wind Integration and Transmission Study), an ISO New England wind integration study, an ERCOT
wind integration study, and an IEA Task 25 wind integration study.
14 Ibid, p.19.
13. 11 | brattle.com
A decade ago, the majority of industry experts might have believed that accommodating more
than 20% of variable renewable energy sources without significantly changing the existing
system would be impossible. Today, this threshold has moved to perhaps 30% and in some cases
significantly higher, as highlighted by the renewable penetration levels examined in the most
recent integration studies. Both ERCOT and Xcel Energy Colorado experience relatively high
levels of wind generation– in the case of Xcel Energy Colorado at certain times on par with the
highest penetration levels in Europe – and as ISOs/RTOs and utilities that have made significant
progress in developing tools to better integrate large amounts of wind. For this reason, we turn
next to exploring each of these two systems in more detail.
IV. Integrating Renewable Energy in ERCOT
In this section we explore various measures ERCOT has taken to facilitate the integration of
wind (and other renewable energy sources). As shown in Figure 5, ERCOT has nearly 12.5 GW
of wind capacity installed, and Texas is the state with the largest amount of installed wind in the
United States in terms of MW installed. In 2014, wind energy contributed more than 10% to
meeting ERCOT’s total demand, which means its wind penetration is approaching the levels of
the European countries with the highest wind penetration rates.15 During some hours, wind
production approaches 40% of total demand. 16 Also as shown in Figure 5, ERCOT analysis
projects that wind penetration could almost double again over the next three years , which
would bring the wind penetration as a percentage of load served near the top of global rankings.
Beyond this fact, ERCOT also makes for an interesting case study in renewables integration
because it is a relatively isolated electric system only weakly connected to other grids (through
DC ties with the Eastern Interconnection and Mexico). Unlike some of the European countries
with high wind (and solar) penetration, ERCOT, while relatively large, is not able to “lean” on
neighboring systems to help mitigate the impacts of variable generation from renewables to the
same degree as countries like Denmark or Germany. The absence of strong connections to
neighboring regions is also important in the sense that the challenge of integrating variable
renewable energy resources diminishes significantly as renewable generation sources are spread
over a larger geographic area.
15 As shown in Figure 3 above, six European countries have wind penetration levels above 10%, with
three countries (Spain, Portugal and Ireland) approaching or exceeding 20% and one country
(Denmark) exceeding 30%.
16 On March 31, 2014, wind output reached 39.4% of total ERCOT load for a short period of time. See
Trip Doggett, ERCOT Update, July 23, 2014.
14. 12 | brattle.com
Figure 5: Projected Annual and Cumulative Wind Installations in ERCOT
Source: ERCOT, Generator Interconnection Status Report, March 2015
In the rest of this section, we describe in some detail various measures taken by ERCOT that
have helped or are designed to help facilitate the integration of variable renewable energy
sources.
A. NODAL PRICING MARKET AS ENABLER
In December 2010 ERCOT introduced its Nodal Market, which allows locational marginal prices
(LMPs), i.e., potentially different prices at many different geographic locations. This new market
design provides more direct price signals to both generators and load and better reflects
congestion in the transmission system. The LMP-based market allowed for a shift from portfolio-
based scheduling and dispatch to resource-specific scheduling and dispatch, which facilitated
better wind integration even though not undertaken explicitly for that purpose. At the same time
as introducing the new market design, ERCOT also moved from a 15-minute dispatch resolution
to a 5-minute resolution, which ERCOT identifies as “one of the main reasons why ERCOT has
been successful in integrating renewables with minimal increase in Ancillary Services
15. 13 | brattle.com
capacity.”17 Moving towards shorter-term scheduling, which in turn permits taking into account
better system information including more accurate forecasts of near future wind and solar
generation, is recognized as an important operational tool for managing renewable output
variability.
B. CREZ LINES TO LOWER WIND CURTAILMENT
A second important set of actions designed to help better use and manage renewable energy
sources was the construction of significant additional transmission capacity to areas with high
wind potential but with insufficient transmission capacity. In 2005 the Texas State Legislature
authorized the addition of significant transmission capacity into Competitive Renewable Energy
Zones (CREZ), a process that was completed in 2014. The lines were intended to expedite
construction in areas where renewable generators were committed to building, and were
designed to accommodate a total wind capacity of 18,500 MW18 (as Figure 5 above shows, this
level could well be exceeded in the near future, even if not all of the additional wind is built in
the areas connected through CREZ lines).
Prior to the CREZ lines being built, West Texas, where most of the wind capacity was located,
experienced significant instances of negative LMPs and curtailments. Negative prices result when
total supply from resources that either must run (such as inflexible baseload plants) or lose non-
energy revenues if not producing (such as production tax credits and renewable energy
certificates for wind plants) exceeds demand. Negative prices are therefore a sign of a significant
supply-demand mismatch, given available transmission capacity. In extreme cases, the excess
supply becomes so large that maintaining system reliability requires curtailing some generation
(such as wind). Both negative prices and curtailments are therefore evidence that not enough
transmission capacity exists to deliver power generated by a wind plant (even at zero or negative
offer prices) to customers willing to pay for it.19 Additional transmission lines from wind-energy
producing regions to demand centers alleviate both negative pricing and curtailments. The
completed CREZ lines – for a cost of approximately $6.8 billion – are credited with significantly
contributing to lower wind curtailment since 2012, from levels as high as 17% in 2009 to 1.6% in
2013,20 and with mostly eliminating negative prices.21 It should be noted that the cost of the
17 ERCOT, ERCOT Concept Paper: Future Ancillary Services in ERCOT, Draft Version 1.1, 2013, p.8.
18 http://www.texascrezprojects.com/overview.aspx.
19 In addition to facing curtailment from insufficient transmission offtake capacity, negative bids are a
result of the way in which wind development receives tax incentives proportional to output. Some
generation companies regard this as a policy that distorts markets and makes wind expansion
undesirable. While an important issue in public policy towards encouraging new technologies, this is
a political side effect and not a true integration issue.
20 Lori Bird, Jaquelin Cochran, and Xi Wang, Wind and Solar Energy Curtailment: Experience and
Practices in the United States, NREL, March 2014, p.9.
21 See http://www.eia.gov/todayinenergy/detail.cfm?id=16831.
16. 14 | brattle.com
CREZ lines is in addition to the modest integration cost estimates outlined above and that it has
led to an active debate about who should bear the cost of additional transmission infrastructure.22
C. IMPROVED CALCULATION OF THE CAPACITY CONTRIBUTION OF WIND
Ensuring resource adequacy is one of the primary concerns of electric system operators. Models
for estimating the contribution of conventional fossil generation sources to resource adequacy
have been used for decades. For variable generation, however, efforts to develop appropriate
metrics are less established and continue to evolve. Understanding the contribution of variable
renewable energy resources to meeting peak demand is critical for managing a system with
increasing shares of renewable generation. Assuming that variable renewable resources do not
contribute to resource adequacy is still a common practice in several countries and regions,
including some of the European countries with high penetration of renewables. The practice is
often justified with the argument that since output cannot be controlled (at least not in the
positive sense – it can be curtailed) by the system operator, the system cannot “count” on the
production from such generators. However, in electric systems with a resource adequacy
requirement (unlike ERCOT), this approach can result in additional costs beyond what is
necessary, since it ultimately requires end users to pay for more capacity than is actually needed
when properly assessing resource adequacy needs.23
In the United States, system operators typically give some capacity value to variable renewable
generation. An often used approach for assessing this contribution is called “Effective Load
Carrying Capability” (ELCC). ELCC estimates the statistical relationship between demand and
the expected contribution from a given generation resource using various modeling techniques
and data sources including observed actual generation during historic peak load conditions.
Until late last year, ERCOT used an estimated ELCC of 8.7% for wind generators no matter
where in ERCOT they were located.24 Recently ERCOT updated its ELCC estimates for wind
generation based on actual observed capacity factors during peak load conditions. The result was
an increase in the estimated contribution of wind to resource adequacy and a differentiated
assessment of that contribution by region. Specifically, as of November 2014, ERCOT is
determining wind’s capacity contribution is based on up to the ten previous years of wind
production during the 20 highest peak hours during the summer and winter peak load season
respectively.25 For solar PV, ELCC is assumed to be 100% of capacity up to 200 MW of solar PV
22 In August 2014, the Public Utilities Commission of Texas initiated a project to review the cost
allocation of renewable energy production related transmission and ancillary services (PUCT Project
No. 42647) with a set of questions including whether or not renewable resources should help fund
further transmission investments. See PUCT, Memorandum, August 6, 2014).
23 ERCOT is an energy-only market without a resource adequacy requirement.
24 ERCOT, Report on the Capacity, Demand, and Reserves in the ERCOT Region, 2015-2024, February
2014.
25 ERCOT, NPRR Number 611, Board Report, October 14, 2014.
17. 15 | brattle.com
installed, and subsequently the actual average capacity factor during the 20 highest peak periods
of the preceding three years during the summer and winter peak load season, respectively.26
As a consequence, as of November 1, 2014 wind in non-coastal regions is contributing to reserve
margins with 12% of nameplate capacity during the Summer Peak Load Period and 19% during
the Winter Peak Load Period. Coastal wind is contributing 56% during the Summer Peak Load
Period and 36% during the Winter Peak Load Period. Solar PV, which is currently under 200
MW in installed capacity, is contributing 100%.27 Relative to the previous calculation, the new
methodology increased expected reserve margins by approximately 2% (from 13.7% to 15.7% in
2015 and from 4.9% to 7.3% in 2024).28 The new methodology suggests that ERCOT actually has
higher reserve margins than was estimated under its old methodology and will need to attract
fewer additional resources to maintain target reserve margins going forward, all else equal. This
in turn means that the estimated cost of a system with higher renewable share is less – since
fewer total resources are needed to maintain adequate reserve margins than under the old
methodology.
In ERCOT, this accounting change does not directly affect costs, since ERCOT does not have a
resource adequacy requirement and wind’s capacity credit does not displace other capacity
resources. Wind displaces other capacity resources only to the extent that its output reduces
energy prices across the year, and thus deters entry or promotes retirements. However, in other
systems that have resource adequacy requirements, capacity accounting does affect costs more
directly, as each MW of wind credited reduces the amount of other capacity needed.
D. ADVANCES IN WIND FORECASTING
While there is and has been significant wind development activity on the Gulf Coast, ERCOT’s
large wind capacity is still relatively geographically concentrated in West Texas and the Texas
Panhandle, which reduces the diversity benefits that would result from wind resources being
more equally spaced across a wider area. 29 As a consequence, changes in meteorological
26 Ibid.
27 ERCOT, Report on the Capacity, Demand, and Reserves in the ERCOT Region, 2015-2024, December
1, 2014.
28 To estimate the change in reserve margin, we used the December 1 ERCOT report on the Capacity,
Demand, and Reserves in the ERCOT Region, 2015-2024 from December 1, 2014, available in
spreadsheet form from ERCOT’s website, and replaced the applied new capacity contribution factors
with the previously used 8.7%.
29 As of 2014, wind capacity on the Gulf coast represented about 14% of total ERCOT wind capacity
(Texas Wide Open For Business, The Texas Renewable Energy Industry, 2014, p. 13-14). Research
shows that short term variability of wind output can be mitigated relatively easily by interconnecting
wind output from a relatively small set of geographically diverse sites. See Warren Katzenstein, Emily
Fertig, Jay Apt, The variability of interconnected wind plants, Energy Policy 38, 2010, p. 4400-4410.
Also, as indicated above, coastal wind in ERCOT is better correlated with demand in major load
centers.
18. 16 | brattle.com
conditions can lead to rapid changes in wind output, which in turn can require large ramping (up
or down) from the rest of the ERCOT resources. ERCOT has improved its weather forecasting
capabilities over the past several years. ERCOT has also implemented the ERCOT Large Ramp
Alert System using probabilistic wind forecasts for the next six hours updated every 15 minutes.
This system permits operators to commit resources during the day with a much better
understanding of the likelihood of needing additional resources for large ramping events caused
by changes in wind production.30
E. TECHNOLOGICAL IMPROVEMENT OF RENEWABLE SOURCES
Technological advances related to renewable energy resources themselves can facilitate their
integration with the electric system. One example of the co-evolution of operational procedures
and technological capabilities is ERCOT’s requirement that wind generators, having signed
interconnection agreements on or after November 1, 2008, need to provide voltage ride-through
capabilities – that is, the ability to continue operating during short-term periods of voltage
fluctuation rather than automatically shutting down.31 As a consequence, these newer wind
generators do not have to disconnect when system voltage levels rise above or fall below the
target level of 60 Hz. Absent voltage ride-through capability, the system operator has to set aside
sufficient resources to be able to react to a potentially large set of generating resources (in this
case wind generators) disconnecting from the system, which might turn a small problem into a
much more severe one.
F. REDESIGN OF ANCILLARY SERVICES
Another important area of activity related to renewables integration is ERCOT’s redesign of
ancillary services markets, as part of its Future Ancillary Services (FAS) proposal. 32
Implementation of FAS may depend partly on the results of ERCOT’s benefit cost analysis of the
proposal, due out later in 2015. This redesign is driven by the perceived need to meet future
system demands as the penetration of variable energy resources increases, while also
accommodating new opportunities to meet those needs. It aims to incorporate a variety of
advanced energy technologies into the marketplace, including faster ramping thermal
generation, energy storage, automated DR, distributed generation, and renewable generation.
For example, FAS introduces a new product called Fast Frequency Response 1 (“FFR1”) that
advanced batteries and fly-wheels can provide. Load resources (discussed in more detail below)
could also provide a Fast Frequency Response product called “FFR2,” similar to how they provide
responsive reserves today. ERCOT estimates that approximately 1,400 MW of load resources are
30 Pengwei Du, ISO Experiences with Stochastic Wind Forecasting – ERCOT, ERCOT.
31 ERCOT, ERCOT Nodal Operating Guides, Section 2: System Operations and Control Requirements,
February 1, 2014, p.2-25.
32 ERCOT, ERCOT Concept Paper: Future Ancillary Services in ERCOT, Draft Version 1.1, 2013, p.9
19. 17 | brattle.com
capable of meeting the requirements of FFR2.33,34 Both types of FFR would provide more rapid
frequency response than traditional resources to compensate for sudden unplanned outages at
large thermal units. Current proposals would require FFR resources to deliver their full response
within a half second.
In the longer term, ERCOT is also raising the question whether a shift from conventional fossil
to more variable renewable generation may lead to a loss of system inertia, which is traditionally
supplied by synchronous generation (spinning generators, typically generators with spinning
mass such as fossil fuel or hydro resources). This concern, if validated, may merit, at some point
in the future, the introduction of some new ancillary service to incentivize Synchronous Inertial
Response Service (SIR). In that context ERCOT is also evaluating to what extent synthetic (or
emulated) inertia from inverter-based generation sources (such as wind turbines) might be able
to provide the necessary capabilities in the future. While practical experience with wind
generators providing synthetic inertia is limited, it appears that at least under some conditions
inverter (or equivalent) technologies can provide some of the inertia services typically provided
by synchronous equipment.35
G. DEMAND RESPONSE
Demand response (DR) is playing an increasing role in providing capacity, but also in mitigating
shorter term events potentially impacting reliability. While DR is primarily used as a capacity
resource, i.e. as a way of ensuring that the combination of supply resources and DR are sufficient
to maintain a stable supply of electricity, particularly during the periods of highest demand, it is
also used for emergency situations, such as when generation outages lead to relatively short term
supply shortages. Many DR programs limit the number of times, and define lengths of time for
such calls, each year and do not require advanced technology. For example, interruptible load
contracts using some form of direct load control (DLC) have been around for many years. These
types of “traditional” DR can help grid operators manage any relatively rapid and unexpected
changes in the output from variable renewable energy sources. However, in the future advances
in technology such as smart meters (defined as meters that measure consumption at frequent
intervals and/or allow for frequent bidirectional communication), home energy management
systems, smart appliances, etc. will increasingly create additional opportunities to use DR in
33 Unlike most other system operators that secure operating reserves mostly through generator
resources, ERCOT has been allowing load to provide operating reserves for ten years. Today, out of
the operating reserve requirements of 2,300 MW (or higher), these load resources provide
approximately 1,250 MW of responsive reserves. See http://www.ercot.com/content/meetings/wms/
keydocs/2004/0923/WMS09232004-8.doc and http://www.ercot.com/content/gridinfo/resource/2015/
adequacy/cdr/CapacityDemandandReserveReport-May2015.pdf.
34 ERCOT, ERCOT Concept Paper, Future Ancillary Services in ERCOT, Draft Version 1.1, p.19.
35 In addition to requiring all wind generators to be capable of high- and low voltage ride through,
Hydro Quebec already requires wind plants with 10 MW or greater capacity to be capable of
providing emulated inertia. See Hydro Quebec, Transmission Provider Technical Requirements For
The Connection Of Power Plants To The Hydro-Québec Transmission System, p.61.
20. 18 | brattle.com
situations other than emergencies. More robust DR can therefore make a significant contribution
to integrating larger amounts of renewables.
Over the past five years ERCOT has changed its programs allowing participation by DR, which
include a number of distinct products, all essentially targeting “traditional” DR: weather and
non-weather sensitive Emergency Response Service Ten Minute (ERS-10) and Emergency
Response Service Thirty Minute (ERS-30), both of which are emergency interruptible load
services. Procurements during 2014 resulted in contracts for between 450 MW and 630 MW of
non-weather sensitive ERS-10 and between 97 MW and 280 MW of non-weather sensitive ERS-
30. There is currently no contracted weather-sensitive ERS-10 and 21.6 MW of weather-
sensitive ERS-30.
ERCOT also has a load-based 10-minute responsive reserve ancillary service, which targets larger
customers connected through two-second demand data meters for non-emergency services. In
theory, both controllable and non-controllable Commercial Load Resource (NCLR and CLR)
programs exist. As of January 1, there were 232 load resources corresponding to 3,056 MW
registered with ERCOT. All but two were non-controllable resources, meaning that they provide
Responsive Reserves Service (RRS) using high set underfrequency relays (UFRs). These resources
bid into the day-ahead market and up to a total of 50% of the RRS awards can be made to load
resources. During 2014, the average award of RRS to load resources was approximately 1,350
MW.36 Finally, the Four Coincidental Peaks (4CP) program encourages load resources to lower
peak demand during the highest load hour in each of the four summer months (June through
September) since the customers’ share in transmission and distribution costs depends on the
magnitude of those peaks. ERCOT estimates the impact of the 4CP program (which does not
provide explicit signals for DR, but rather relies on loads to lower their peaks, which may or may
not coincide with high prices or changes in market conditions caused by fluctuations in variable
generation) to be between 830-950 MW.37
The rapid deployment of smart meter technology, which by February 2015 had reached 6.7
million representing 98.4% of ERCOT load,38 is providing the basis for increasing participation of
residential load resources in demand response. For example, the ERS-30 program, which requires
generation or load reductions to be made available in emergency situations within 30 minutes, is
increasingly attracting residential customers. In the summer of 2014, ERCOT awarded three ERS
contracts to Qualified Scheduling Entities (QSEs), which in turn included three residential
aggregations initially involving approximately 60,000 residential participants for a total of 21.6
MW of peak demand (between 1 PM and 8 PM).39
36 ERCOT, Annual Report of Demand Response in the ERCOT Region, Version 1.0, March 2015.
37 Ibid.
38 ERCOT, ERCOT Monthly Operational Overview, February 2015, p.41.
39 Paul Wattles, Item 9: Demand Response Update, August 12, 2014.
21. 19 | brattle.com
ERCOT’s emergency response DR programs have already played a significant role in helping
maintain system reliability. For example, on January 6, 2014, cold winter temperatures were
exacerbated by unplanned outages of several generation sources. As a consequence, ERCOT
declared an emergency and activated 111 MW of ERS-30 and 509 MW of ERS-10 resources for
approximately one hour.40 During the same event on January 6, ERCOT had previously activated
1,080 MW of ancillary services using load resources.41
ERCOT also created an opportunity for loads to more actively participate in markets during peak
load conditions, essentially allowing for price-sensitive bids in real-time markets.42 Called “Loads
in SCED (Security Constrained Economic Dispatch)”, a first version of the program only open to
Load Serving Entities (LSEs) went into operation on June 1, 2014. To date, ERCOT has seen
limited interest in participation. As of the summer of 2014, between 25-30 MW of aggregated
residential demand from air conditioning, water heaters and pool pumps under direct load
control were in the qualification process.43 However, no resources are currently participating in
the program.
A second, more comprehensive version of the program open to Curtailment Service Providers
(CSPs), i.e. 3rd party DR providers, currently is under discussion. Full implementation of these
programs would allow participating customers to offer to reduce their consumption when prices
are high in real-time, enabling ERCOT to match supply with demand at least cost using both
supply and demand resources. Beyond these programs, ERCOT is also examining the potential
future role of DR in the provision of ancillary services.44
Beyond ERCOT’s own programs, the ERCOT energy-only market with full retail choice also
provides ample opportunities for Retail Energy Providers (REPs) to offer rates and incentives that
encourage demand participation in ways that mitigate high prices, typically associated with
relatively high net loads. Offering various retail rate structures allow REPs to differentiate
themselves from their competitors and allow their customers to reduce costs by being price-
responsive. By creating price-responsive demand, these programs have the potential to mitigate
the impacts of variations in renewable energy production before emergency situations arise.
A number of the programs offered by REPs rely on technology such as smart meters, smart
thermostats etc. While the high penetration rates of smart meters is no longer a barrier to the
deployment of such programs, increases in the penetration levels of smart thermostats – which
allow remote control of air-conditioners and electric heating systems, for example in response to
price spikes caused by a drop-off in renewable generation – and other enabling technology
40 ERCOT, Final Report: January 6 2014 EEA, March 7, 2014, p.7.
41 Ibid.
42 ERCOT, Nodal Protocol Revision Request (NPRR) 555, Load Resource Participation in Security-
Constrained Economic Dispatch, posted July 3, 2013.
43 Paul Wattles, Item 9: Demand Response Update, August 12, 2014, p.9.
44 Paul Wattles, ERCOT ISO and DR Overview 2014, May 21, 2014.
22. 20 | brattle.com
increase the potential for such programs to expand in the future. As of 2014, ERCOT estimates
the REP based programs contributed approximately 432.5 MW of DR, about half from pricing
programs (real time pricing, Block and Index pricing, etc.) and half from load control programs.45
As of mid-2013, 4,105 customers were enrolled in real time pricing programs, 22,947 in
block+index46 programs and 117,570 in other Time of Use (ToU) pricing programs.47
There is some indication that the number of enrolled customers is increasing relatively quickly.
The majority of time-sensitive ToU tariffs to-date involve “free weekends and evenings” type
programs. While not yet a major factor in helping with grid reliability and variable renewable
integration, the combination of smart meter infrastructure and an increasing acceptance of time-
responsive tariff designs creates a basis for the development of more sophisticated tariff
structures designed at making load more flexible in direct response to price fluctuations,
including those driven by variable renewable generation.
H. PILOT PROJECTS IN ERCOT
In addition to the changes made by ERCOT and described above, there are also a number of
other early stage/pilot programs not administered by ERCOT but occurring inside its territory
with important implications.
Oncor, the largest regulated transmission and distribution system operator in ERCOT, was one of
two participants in a Department of Energy funded pilot project involving Dynamic Line Rating
(DLR) completed in 2013.48 DLR dynamically increases transfer limits relative both to the static
ratings typically used in utility operations and to ambient-adjusted (AAR) line ratings based on
ambient conditions of the physical transmission line, such as temperature, wind, and humidity,
or based on the direct measurement of line sag. Lower temperature and higher wind help cool
the physical wires and therefore allow higher transfers of power without sagging as much from
the heat produced by current flow.49 Two important potential application of DLR are for
congestion mitigation and planning. Oncor, in its evaluation of the DLR pilot, notes that “Study
results show that congestion mitigation can be obtained with as little as a 5 to 10% increase in
capacity over the currently used ambient-adjusted line ratings. The effective congestion
mitigation can be in the range of 60 to 100% on the lines monitored.”50 While the pilot did not
45 ERCOT, Annual Report of Demand Response in the ERCOT Region, Version 1.0, March 2015, p.7.
46 Under Block+Index pricing, customers pay a certain amount for a certain number of kWh (block). For
consumption above the block, pricing is indexed to wholesale prices.
47 Paul Wattles, Demand Response Update, ERCOT, October 24, 2014, p.9.
48 The other participant was the New York Power Authority (NYPA).
49 See Oncor West Texas Dynamic Line Rating (DLR) Project presentation, dated March 26, 2013, available
at: http://www.ercot.com/content/meetings/rpg/keydocs/2013/0326/Oncor_W_Texas_Dynamic_Line_
Rating_Presentation_for_ERCOT_032.pdf.
50 Oncor Electric Delivery Company, Dynamic Line Rating, Oncor Electric Delivery Smart Grid
Program, Final Report, August 2013, p.2.
23. 21 | brattle.com
provide definitive answers, Oncor did find that 5% DLR use increased average wind generation
by 3%, which, given that only half of the lines of the pilot involved wind generation, Oncor
deemed significant.51 In other words, Oncor found that the use of DLR allowed increased levels
of wind generation during contingency events without causing congestion.
Other recent examples of early stage experiments include the use of smart meters to measure
voltage levels (and resulting voltage profiles) at the meter level, to use this data to develop
feeder-level voltage profiles and to use those profiles to predict transformer outages. At least one
utility in Texas is examining how this data can be used to better manage the maintenance and
replacement of transformers in ways that both lowers the chance of outages and reduces the cost
of maintaining a reliable distribution system. It can be expected that as the share of distributed
variable renewable energy sources, most likely solar PV, increases, the benefits of being able to
measure voltage profiles at this level will help reduce transformer outages and the costs related to
integrating such resources.52
Similarly, current battery pilot programs suggest that the benefits of this kind of storage, installed
at the feeder level and serving just a few customers, could substantially exceed those traditionally
estimated. Preliminary pilot results have shown that in local outage situations, when batteries
keep a group of customers supplied with electricity, dramatic behavior changes are seen such
that customers maintain essential services for much longer than initially expected based on a
given storage capacity.53 While very preliminary, these results point to the potential interaction
benefits of renewables, storage and behavioral changes (such as turning off non-essential
equipment) during stress periods for local distribution systems. Such stress periods could be
caused by external events such as storms, but also by unforeseen variability in renewable energy
production at high penetration levels.
V. Integrating Renewable Energy at Xcel Energy Colorado
Xcel Energy Colorado is a vertically integrated utility providing electric service to approximately
1.3 million wholesale and retail customers in Colorado, including the Denver metropolitan area.
Xcel Energy is among the utilities with the highest renewable energy penetration and is
recognized as a leader in renewable energy integration, having been ranked first by the
American Wind Energy Association (AWEA) for eleven consecutive years and fifth by the Solar
51 Ibid, p. 168.
52 Based on confidential information provided by one of ERCOT’s distribution utilities.
53 Based on confidential information provided by one of ERCOT’s distribution utilities, a battery system
designed to provide one hour of back-up power was able to sustain essential services for up to four
hours as a result of customers connected to the storage system dramatically reducing their demand
during the periods when storage was needed to supply power not available from the grid.
24. 22 | brattle.com
Electric Power Association (SEPA).54 As of the end of 2013, Xcel Energy Colorado’s wind
portfolio comprised 2,168 MW of wind capacity with another 450 MW to be connected in the
near future. In addition, the system has 188 MW of customer-sited solar generation and 80 MW
of utility scale solar PV capacity, which is expected grow by 170 MW in the near future.55 The
balancing area’s peak load in 2013 was 6,646 MW and wind contributed 18.7% to Xcel Energy
Colorado’s annual load.56 Xcel Energy Colorado is not part of an RTO and does not operate a
formal day-ahead or real-time energy market. All these attributes create challenges that make
Xcel Energy Colorado a good case study for integrating variable renewable energy sources by a
single utility.
With the goal of increasing renewable penetration levels, Xcel Energy Colorado has been
addressing the system operational issues with the focus on changes in ancillary service
requirements, improved wind forecasting, and increases in generation flexibility.
A. CHANGE IN ANCILLARY SERVICES REQUIREMENTS
While the summer peak load for the Xcel Energy Colorado system is approximately 6,700 MW,
the system load during off-peak hours can drop to around 2,700 MW. This indicates that the
system could have over 2,600 MW of wind generation potentially serving a 2,700 MW load.
Given the magnitude of installed wind capacity, wind ramping events, specifically ramp-down
events (i.e. periods when electricity production from wind decreases relatively rapidly), have
been identified as a potential reliability concern.57 Unlike ramp-up events, there are no wind
turbine control actions available to mitigate the ramp-down events, leaving improved forecasting
as the primary tool to provide the system operator adequate foresight to plan for increased
resource needs. This leads to the need for advanced energy resources like automated demand
response, energy storage and other fast ramping resources.
For resource planning, Xcel Energy Colorado determines the generation capacity to be kept
available, similar to other system operators. However, Xcel Energy Colorado also determines the
responsiveness, flexibility, or ability of that generation to be brought on-line in a timely manner
to address the needs for flexibility. Consequently, in 2011 it adopted a 30-minute Wind Reserve
Guideline to ensure that enough standby generation capability can be brought on-line within 30-
54 www.xcelenergy.com/Company/News/News_Releases/Xcel_Energy_named_No._1_utility_wind_
provider_for_11th_consecutive_year.
55 Public Service Company of Colorado, Xcel Energy, Operating Companies Joint Open Access
Transmission Tariff - First Revised Volume No. 1, filed with the Federal Energy Regulatory
Commission, May 15, 2014, p. 2.
56 Ibid.
57 Ramp-up events, with continued or sustained increases in wind generation levels, are dealt with by
reducing the level of generation from gas-fired units, or in severe cases, shutting down a gas-fired unit
or curtailing wind. In general, ramp-up issues will have economic implications but not necessarily
lead to reliability issues. On the other hand, ramp-down events can potentially lead to a shortage of
overall generation, which is a reliability concern.
25. 23 | brattle.com
minutes to cover the needed flexibility. The flexible capacity need was calculated to be a MW for
MW match against wind generation for the first 290 MW.58 For wind generation levels above the
290 MW threshold, additional 30-minute capable standby generation is held based on the
aggregate wind energy being produced from wind facilities located along the northern Colorado
border within Energy Resource Zone (ERZ) 1, which contains the majority of Xcel Energy
Colorado’s wind resource.59 Figure 7 shows the calculated flexibility needs as a function of wind
generation.60
Figure 7: 30 Minute Reserve Needs and Wind Generation Level
Partly in response to rapidly increasing wind (and solar) penetration, Xcel Energy recently asked
the FERC for changes to its Open Access Transmission Tariff (OATT), in particular the amount
of certain ancillary services it procures and how it recovers the resulting costs. Specifically, it
asked the FERC to approve changes to its Regulation and Frequency Response Service (Schedule
3 of its OATT) and to approve the formal introduction of a Flex Reserve Service (Schedule 6A of
its OATT) specifically designed to handle large reductions in wind generation due to losses in
wind speed (and hence occurring over a somewhat longer period of time, between tens of
minutes and hours). The addition of a Flex Reserve service can by itself be considered an
58 This 290 MW threshold was determined in 2011 and may change in the future as the Xcel Energy
Colorado resource portfolio, including wind and solar, changes.
59 As of 2011, out of the five ERZs, only ERZ 1 and 3 had wind resources, with future wind resources
planned for ERZ 2. At the time, over 80% of all Xcel Energy Colorado’s wind resources were located
in ERZ 1. The calculation method based on ERZ 1 wind generation may also change with future wind
locations.
60 Source: Xcel Energy Colorado 2011 Wind Limit Study, filed as part of the 2011 Electric Resource Plan,
available at: http://xcelenergy.com/staticfiles/xe/Regulatory/Regulatory%20PDFs/PSCo-ERP-2011
/Attachment-2.14-1-2011-Wind-Limit-Study.pdf
26. 24 | brattle.com
innovation in systems operation designed to better integrate variable renewable energy
resources. We note that the amount of additional ancillary service costs to be recovered is
$727,000 per year, or only 0.3% of its $230 million annual transmission revenue requirement.61
B. ADVANCED WIND FORECASTS
In parallel to adding the 30 minute flexibility to accommodate increased net load variability and
ramping events, Xcel Energy has been advancing its wind forecast methods. As a stand-alone
utility lacking geographic diversity, the value of forecast accuracy for the variable resources is of
particular importance. Furthermore, the same level of forecast error translates into greater
absolute errors as renewable penetration levels grow.
In 2009 Xcel Energy implemented an advanced wind forecasting system. The system, developed
in collaboration with the National Center for Atmospheric Research (NCAR), blends forecasting
and statistical methods.62 The system uses a variety of inputs from satellites, planes, radars,
ground-based weather stations, and sensors on the wind turbines themselves and produces a new
forecast every 15 minutes.63 It improved the wind forecast accuracy by 35% relative to previous
forecast methods and informs both day-ahead and real time operations. Since the introduction of
the improved methodology, Mean Absolute Error (MAE) in wind forecasting has decreased
significantly. In Colorado, MAE dropped from 18.01% in 2009 to 11.04% by 2013 (a 38.7%
reduction) with resulting savings of $20.4 million.64
These findings are consistent with the evidence from other jurisdictions that over time wind
forecast accuracy has increased and integration costs have fallen. For example, Eurelectric, the
European industry association for the power industry, cites wind forecast improvements as one
of the measures improving the integration of variable renewables, and includes Figure 8 in a
recent report on the topic.65
61 FERC, Order Conditionally Accepting And Suspending Proposed Tariff Revisions, Subject To Refund,
And Establishing Hearing And Settlement Judge Procedures, Dockets Nos. ER14-1969-000, ER14-
1969-001 and ER14-1969-002, Issued December 5, 2014, p.3.
62 For a detailed description of the system, see Mahoney et al., A Wind Power Forecasting System to
Optimize Grid Integration, IEEE Transactions on Sustainable Energy, Vol. 3, No. 4, October 2012.
63 https://www2.ucar.edu/atmosnews/news/5771/ncar-wind-forecasts-save-millions-dollars-xcel-energy.
64 Drake Bartlett, What is the value of a Variable Generation Forecast? Xcel Energy, February 25, 2014.
65 Eurelectric, Integrating intermittent renewables sources into the EU electricity system by 2020:
Challenges and solutions, 2010.
27. 25 | brattle.com
Figure 8: Changes in Wind Forecast Accuracy in Spain
Source: Eurelectric, 2010, Reproduced Picture 10
C. ADVANCED OPERATIONS
In addition to the ancillary services and forecast improvements, Xcel Energy Colorado has
advanced operations to better accommodate renewable resources and reduce overall production
cost. These operational advancements expand beyond the thermal generators that traditionally
provided the flexibility needed to reliably operate the system.
For example, in 2010 Xcel Energy Colorado made technological modifications to its Fort Saint
Vrain 750 MW combined cycle gas plant that lowered the minimum generation level by 300
MW and increased the turn-around time (the time needed between shut-off and restart of the
plant) from 8 hours to 2 hours. Also, many of Xcel Energy Colorado’s newer gas turbines were
updated with the GE FastStart technology, which improved the start-up time of these units.
Similarly in 2011 the minimum generation level of the Comanche #3 coal-fired power plant was
lowered from 500 MW to 405 MW.66 Along with these improvements, a number of coal units
have been, or are in the process of being, retired. Cherokee unit #4 is being converted from
burning coal to gas. In addition to the increased flexibility achieved by increasing the share of
gas-fired generation, Xcel Energy Colorado is also studying the ability of the natural gas storage
and the delivery system to supply fuel to gas-fired generation resources which shoulder the
majority of the 30-minute wind reserve duty. It has been identified that if an extreme wind ramp
down event were compounded by the loss of a large coal unit, there may be the need to fuel
switch some of the gas generation to fuel oil, especially during the beginning and end of the
heating season, or electric load shoulder months, when storage injection or withdrawal rates of
gas are at their lowest and wind generation is at its highest.
Xcel Energy Colorado also applied changes to its Cabin Creek pumped Storage plant, including
receiving WECC approval for Cabin Creek capacity to count toward spinning reserve, and
66 Ibid.
28. 26 | brattle.com
shifting black start responsibilities away from Cabin Creek to other units to free up water that
was otherwise reserved for black start for peak shaving and/or ancillary services.
In 2011, Xcel Energy Colorado installed Automatic Generation Control (AGC) systems at four
wind facilities in Colorado to enable the system operator to ramp down the output from these
wind facilities automatically during certain periods.67 Today, two-thirds of the wind turbines in
Xcel Energy Colorado are equipped with AGC and provide regulation. Furthermore,
advancements in power electronics have enabled operators to provide frequency control through
wind plants by extracting stored inertial energy from the wind turbines. The response time of
these wind turbines that occur during the first ten-to-fifteen seconds following a large frequency
dip is faster than the traditional governor response of larger conventional thermal generation
resources and has proved to actually improve system performance.
Finally, in late 2014 Xcel Energy Colorado filed a revised tariff to reflect a Joint Dispatch
Agreement (JDA) with Platte River Power Authority and Black Hills Colorado Electric Utility
Company. The JDA, with a framework similar to an energy imbalance market, although smaller
in scale, is intended to provide the participating parties with a centralized, coordinated, intra-
hour dispatch system for their generation resources. The overall goal is to achieve more efficient
and lower generation cost to serve load and is particularly helpful with increasing renewables
penetration since variations of actual output from wind and solar generation compared to
forecasts can be balanced across a larger set of resources.68
VI. Other Innovative Approaches to Integrating Renewables
Beyond the changes implemented by ERCOT and Xcel Energy Colorado, system operators and in
some cases other market participants have implemented or are implementing a number of
measures directly designed to facilitate the integration of larger amounts of variable renewable
generation or having the side effect of doing so. In many instances, the changes do not require
new technology, but it is also true that technological progress facilitates new approaches and in
some cases creates entirely new opportunities. In this section we provide a brief summary of a
sample of approaches and developments. In general, these approaches and developments follow
67 Keith Parks, Wind and Solar Integration in Colorado: Challenges and Solutions, Xcel Energy, August
9, 2011.
68 Under the JDA, Energy transfers will be limited to average transmission capacity (ATC) between the
participating systems at designated interconnection points. Unused ATC will be determined every five
minutes after all other procurement and scheduling deadlines have passed. While the schedule-driven
ATC updates currently occur every quarter-hour, the five-minute update ensures that any intra-hour
schedule changes are adequately captured and that only the leftover ATC will be utilized through the
JDA. The JDA will facilitate a joint economic dispatch of committed resources of the participants
(determined at the beginning of the hour) and would likely reduce the curtailment of renewables and
lower the overall production cost of the participating parties.
29. 27 | brattle.com
what was illustrated in the two cases studies: operational changes, such as shorter dispatch cycles;
forecast enhancements; ancillary service changes; and transmission planning.
As the case studies of ERCOT and Xcel Energy Colorado demonstrate, shorter dispatch cycles in
combination with more accurate shorter-term forecasts of renewable generation are now
commonly recognized as reducing forecast variations from renewable generators and leading to
reduced ancillary service requirements. MISO (and SPP) are taking this concept one step further
and dispatching wind resources similar to traditional generators, by asking the renewable
resources to submit an offer curve for its generation quantity and price. The offer curve will be
treated equally with other offer curves provided by traditional generators and be automatically
dispatched based on merit order. The only difference is the generation quantity that can be
offered by renewable resources depends on the wind forecast, rather than its physical plant
capacity. MISO, by including 80% of its wind capacity in the 5 minute dispatch as Dispatchable
Intermittent Resources,69 improved system reliability “through better congestion management by
replacing manual curtailments with automated real-time dispatch.” 70
MISO has also started developing and partially implementing a look-ahead unit commitment and
dispatch process.71 The look-ahead process will focus on predicting near-term changes needed to
keep energy flowing efficiently and cost-effectively. By incorporating forecast data for both load
and renewable resources, it allows for better decision making, taking into account the likely
future changes of the system (such as a ramping event that could result in local resource needs),
rather than just considering the current status. Stochastic unit commitment, while still in its
infancy, has been gaining traction as another tool for dealing with uncertainty.72
Many system operators other than ERCOT and Xcel Energy Colorado have recognized the
importance of forecasts and have developed and implemented customized centralized wind
69 See MISO, MISO 2013-2014 Winter Assessment Report, Information Delivery and Market Analysis,
June 2014, page 10.
70 Minnesota Department of Energy Resources, Minnesota Renewable Energy Integration and
Transmission Study, September 13, 2013, p. 21. Available at: http://mn.gov/commerce/energy/images/
MN_RE_Integration_Study_2014_pres_Stakeholder_Mtg_091313.pdf. The study notes that two-thirds
of curtailments in MISO occur through the economic dispatch with the other third occurring still
from manual curtailments.
71 See MISO press release discussing how look-ahead tool improves efficiencies while reducing costs,
available at: https://www.misoenergy.org/AboutUs/MediaCenter/PressReleases/Pages/Look-Ahead
Tool.aspx. Further materials for the look-ahead tools are available at: https://www.miso
energy.org/WhatWeDo/MarketEnhancements/Pages/LookAhead.aspx.
72 For examples of stochastic unit commitment studies, see presentation from NREL and EPRI at:
http://uvig.org/wp-content/uploads/2014/10/Ela-Stochastic.pdf and http://uvig.org/wp-content /uploads/
2014/10/Tuohy.pdf.
30. 28 | brattle.com
forecasts over the past few years.73 The forecasts used for commitment and dispatch decisions are
also shared with various market participants. Forecast periods range from longer terms (typically
up to a week-ahead) to a more granular short-term, updated frequently (every 5 to 15 minutes)
and typically used for real-time operation decisions. PJM, ERCOT, and IESO also provide wind
ramp forecasts. Solar forecasts are currently being developed in most markets.74
Several system operators are now allowing wind to provide ancillary services. Both PJM and
NYISO allow wind to provide frequency response, inertial response, and regulation if they meet
eligibility requirements. While ISO-NE precludes wind from providing regulation, it does allow
wind to provide frequency response and inertial response upon meeting eligibility requirements.
SPP allows variable resources to provide regulation down if they meet eligibility requirements.
Ancillary service markets are also evolving to provide incentives for faster responding resources
that can provide better performance. For example, in response to a FERC order, PJM provides
“mileage payments,” which account for how well resources respond to the regulation signal for
controlling frequency.75
Transmission planning, as the ERCOT CREZ line success demonstrates, is also a key focus of
system operators. MISO, through its Regional Generation Outlet Study (RGOS), created a
cohesive plan for the MISO footprint by identifying extended transmission plans and renewable
energy requirements. The RGOS results were later adopted as the Multi-Value projects. Similarly
the SPP Integrated Transmission Planning process coordinates the long term transmission
planning with anticipated future resources, a large portion of which is wind.
In addition to these enhancements of traditional tools and processes, storage technologies are
beginning to be tested, included in ancillary service eligibility, or deployed. PJM’s frequency
regulation market, which in response to FERC’s Order 75576 awards quick-start and fast-
responding resources including batteries, has been attracting an increasing amount of battery
storage.77 Along with storage technology, innovation is occurring in ways of using storage. Much
of this innovation is targeting opportunities created by the mismatch of variable renewable
73 Centralized wind forecasts have been implemented in the various markets: PJM (2009), NYISO (2008,
used for individual dispatch decisions since 2009), ISO-NE (2014), MISO (2008), SPP (201), ERCOT
(2008), CAISO (2004), AESO (2010), and IESO (2013).
74 Centralized solar forecasts are only implemented in limited markets: IESO (2013) and ERCOT (2015).
75 See http://www.pjm.com/markets-and-operations/ancillary-services/mkt-based-regulation/fast-
response-regulation-signal.aspx
76 See Beacon Power, Overview of FERC Order 755 and Pay-for-Performance Regulation, March 21,
2014 for an overview of compensation for frequency regulation before and after FERC Order 755.
77 See http://www.utilitydive.com/news/invenergy-bringing-over-60-mw-of-storage-online-for-pjm-frequ
ency-regulatio/399140/. According to the article, Invenergy recently announced the addition of 31.5
MW of storage at its Grand Ridge Storage Facility in Illinois to provide frequency regulation in PJM.
Invenergy plans to bring another 31.5 MW storage facility online in 2015, bringing the total storage
capacity providing frequency regulation services in PJM to above 150 MW.
31. 29 | brattle.com
generation and demand. For example, the recent launch of Tesla’s home battery system happened
approximately at the same time as the announcement of a collaboration between Tesla and
Lichtblick, a German company. Lichtblick has been using its proprietary aggregation software to
bundle an increasing number of micro-combined heat and power systems deployed in residential
buildings and deploy them as “swarm” energy producers,78 optimizing the operation of many
distributed systems – most of which have a thermal storage element – against real-time power
market conditions. The joint venture between Tesla and Lichtblick aims to combine distributed
solar PV systems with in-home storage units and Lichtblick’s optimization software to similarly
operate solar+battery systems in a way that optimizes their use given real-time market conditions
by taking advantage of the latent flexibility in distributed energy systems.79
There are also ongoing innovations combining variable renewable production with measures
aiming to make demand more responsive. Tesla is also collaborating with EnerNOC, a leading
provider of demand response services for commercial and industrial customers.80 Also, earlier in
2015 SolarCity, a major installer of rooftop solar PV systems, announced a partnership with
NEST, the wifi-enabled (smart) thermostat company owned by Google.81 While still in early
stages, a French start-up, Comwatt, has developed a box, similar to a cable TV box, that uses
software to manage electricity consumption in a house to match as much as possible the
production of a distributed solar PV system.82 All these recent announcements show not so much
what is already happening in terms of actively integrating variable renewable energy, but the
extent to which integration associated with increases in renewable energy production is
stimulating innovation.
By the time renewable penetration levels approach those currently identified as practical limits,
it is likely that at least some of these innovations will have matured enough to play a role in
providing solutions, thus quite likely further increasing the share of variable renewable energy
that can safely be integrated into the grid.
78 See http://www.lichtblick.de/en/schwarmenergie/.
79 See http://www.prnewswire.com/news-releases/partnership-for-global-energy-transformationlichtblick
-integrates-tesla-battery-storage-into-energy-markets-502146711.html
80 See http://www.bidnessetc.com/41612-tesla-motors-inc-collaborates-with-enernoc-inc-and-lichtblick-
for -energy-st/.
81 See http://www.solarcity.com/newsroom/press/solarcity-and-nest-partner-make-cost-savings-even-
easier-homeowners.
82 See http://www.cleantechrepublic.com/2014/12/18/comwatt-autoconsommation-electrique-sans-
batterie/ (in French).
32. 30 | brattle.com
VII. Conclusions
In this report, we highlighted how a few ISOs and utilities with material shares of renewable
generation already have changed their operations to accommodate the forecasting challenges and
short-term performance variability that can increase with growing shares of variable renewable
generation. To date, these integration efforts have been largely relying on well-established
technologies, indicating that lack of technology cannot be considered a major barrier to being
able to integrate amounts of variable renewable generation significantly in excess of current
average U.S. levels. Though new technologies are being explored and becoming more promising,
particularly storage, it is not necessary to have large amounts of such new resources to
incorporate meaningful quantities of renewables onto a system and preserve its security and
reliability.
As these case studies show, ISOs and utilities can deploy a large and increasing portfolio of
options to accommodate large and growing shares of renewable generation while maintaining
high levels of reliability. The options range from purely operational changes to possibilities that
become available as a consequence of advancements in technology unrelated to renewable
energy. Examples of the former include increasing the coordination between balancing areas
(including increasing their size), reinforcing the transmission system, and increasing
participation of demand response. Examples of the latter include technological advances in
weather forecasting which, together with better data on historical performance of renewable
energy, allows significant improvements in forecasting accuracy of renewable generation; the
proliferation of smarter infrastructure, much of it deployed at the customer site (smart meters,
smart thermostats, smart appliances, all enabled by smarter software), enabling participation of
increasing amounts of demand in activities that help mitigate the variability of renewable
generation; and technological advances of renewable and complementary technologies
(inverters, batteries) that allow renewable generators themselves to contribute to maintaining
reliability.
Numerous renewable integration studies have estimated the cost of using this wide portfolio of
options to represent a relatively small portion of the overall cost of the electric system. Our case
studies indicate that deploying new and innovative solutions can further mitigate the challenges
of integrating variable renewable generation, at least in some cases (such as using state-of-the-art
wind and solar forecasts) with significant cost savings compared to traditionally used integration
approaches. Continued strong growth of renewable generation will require continued significant
planning and effort, as well as investment in the electric infrastructure – in transmission
infrastructure to bring electricity from renewable resource rich locations to load centers, and in
distribution infrastructure as the share of distributed resources grows. Bringing additional
renewable resources to market will thus likely be an important additional driver of planning and
building a 21st century grid, which is also driven by changes on the demand side of the market
(including distributed generation, but also new sources of demand and options for demand-side
flexibility), changing population densities, the desire to further increase inter-regional
interconnections, cybersecurity concerns, the aging of existing transmission and distribution
infrastructure, etc.
33. 31 | brattle.com
The good news, however, is that there is substantial evidence that accommodating these
increasing levels of variable renewable generation in ways that preserve high levels of reliability
should be possible at a cost (excluding the cost of any incremental transmission) that represents a
modest share of the total cost of the electric system. Specifically, integration of variable
renewable energy at levels of penetration as high as those reliably managed by ERCOT and Xcel
Energy Colorado, if not higher, should not be seen as a significant obstacle to compliance with
EPA’s proposed Clean Power Plan.
34. 32 | brattle.com
VIII.Acronyms
AEEI Advanced Energy Economy Institute
AGC Automatic Generation Control
ALR Adaptive Line Ratings
BSER Best System of Emissions Reductions
CHP Combined Heat and Power
CNG Compressed Natural Gas
CO2 Carbon Dioxide
CPP Clean Power Plan
CREZ Competitive Renewable Energy Zone
DLC Direct Load Control
DLR Dynamic Line Ratings
DR Demand Response
EE Energy Efficiency
ELCC Effective Load Carrying Capability
EPA Environmental Protection Agency
ERCOT Electric Reliability Council of Texas
ERS Emergency Response Service
FAS Future Ancillary Services
FFR Fast Frequency Response
GW Gigawatt
HVDC High Voltage Direct Current
IRR Initial Reliability Review
ISO Independent System Operator
JDA Joint Dispatch Agreement
35. 33 | brattle.com
LMP Locational Marginal Price
MISO Midcontinent ISO
MW Megawatt
NERC North American Electric Reliability Corporation
PSCo Public Service Company of Colorado
PV Photovoltaic
RGOS Regional Generation Outlet Study
RTO Regional Transmission Organization
SPP Southwest Power Pool
T&D Transmission and Distribution
U.S. United States
36. 34 | brattle.com
IX. Bibliography
Andrew Mills and Ryan Wiser, Implications of Wide-Area Geographic Diversity for Short-Term
Variability of Solar Power, LBNL-3884E, September 2010
AWEA, Wind energy helps build a more reliable and balanced electricity portfolio
Beacon Power, Overview of FERC Order 755 and Pay-for-Performance Regulation, March 21,
2014
Constellation, ERCOT Load Response Programs Snapshot
Drake Bartlett, What is the value of a Variable Generation Forecast? Xcel Energy, February 25,
2014
ERCOT, Annual Report of Demand Response in the ERCOT Region, Version 1.0, March 2015
ERCOT, Future Ancillary Services in ERCOT, ERCOT Concept Paper, Draft Version 1.1,
November 2013
ERCOT, Final Report: January 6 2014 EEA, March 7, 2014
ERCOT, Generator Interconnection Status Report, March 2015
ERCOT, Nodal Protocol Revision Request (NPRR) 555, Load Resource Participation in Security-
Constrained Economic Dispatch, posted July 3, 2013
ERCOT, ERCOT Monthly Operational Overview, February 2015
ERCOT, ERCOT Nodal Operating Guides, Section 2: System Operations and Control
Requirements, February 1, 2014
ERCOT, NPRR Number 611, Board Report, October 14, 2014
ERCOT, Report on the Capacity, Demand, and Reserves in the ERCOT Region, 2015-2024,
February 2014
Eurelectric, Integrating intermittent renewables sources into the EU electricity system by 2020:
Challenges and solutions, 2010
Fazil Shaikh and Melissa Karner, Texas Demand Response Programs, Cirro Energy Services, April
4, 2014
FERC, Order Conditionally Accepting And Suspending Proposed Tariff Revisions, Subject To
Refund, And Establishing Hearing And Settlement Judge Procedures, Dockets Nos. ER14-1969-
000, ER14-1969-001 and ER14-1969-002, Issued December 5, 2014
37. 35 | brattle.com
Hydro Quebec, Transmission Provider Technical Requirements For The Connection Of Power
Plants To The Hydro-Québec Transmission System
Jurgen Weiss, Bruce Tsuchida, Michael Hagerty and Will Gorman, EPA’s Clean Power Plan and
Reliability: Assessing NERC’s Initial Reliability Review, The Brattle Group, February 2015
Keith Parks, Wind and Solar Integration in Colorado: Challenges and Solutions, Xcel Energy,
August 9, 2011
Lori Bird, Jaquelin Cochran, and Xi Wang, Wind and Solar Energy Curtailment: Experience and
Practices in the United States, NREL, March 2014
Mahoney et al., A Wind Power Forecasting System to Optimize Grid Integration, IEEE
Transactions on Sustainable Energy, Vol. 3, No. 4, October 2012
Milligan et al., Review and Status of Wind Integration and Transmission in the United States:
Key Issues and Lessons Learned, NREL, March 2015
Minnesota Department of Energy Resources, Minnesota Renewable Energy Integration and
Transmission Study, September 2013
MISO, MISO 2013-2014 Winter Assessment Report, Information Delivery and Market Analysis,
June 2014
NERC, Potential Reliability Impacts of EPA’s Proposed Clean Power Plan, Initial Reliability
Review, November 2014
NREL, 2013 Wind Technologies Market Report, [2014]
Oncor, Dynamic Line Rating, Oncor Electric Delivery Smart Grid Program, Final Report, August
2013
Oncor, West Texas Dynamic Line Rating (DLR) Project, Presentation in March 2013
Paul Wattles, ERCOT ISO and DR Overview 2014, May 21, 2014
Paul Wattles, Item 9: Demand Response Update, August 12, 2014
Paul Wattles, Demand Response Update, ERCOT, October 24, 2014
Pengwei Du, ISO Experiences with Stochastic Wind Forecasting – ERCOT
Public Service Company of Colorado, Xcel Energy, Operating Companies Joint Open Access
Transmission Tariff - First Revised Volume No. 1, filed with the Federal Energy Regulatory
Commission, May 15, 2014
38. 36 | brattle.com
Public Utilities Commission of Texas, Memorandum, August 6, 2014
Public Utilities Commission of Texas, Scope of Competition in Electric Markets in Texas, 2009
SEIA, U.S. Solar Market Insight, 2014 Year in Review, Executive Summary, [2015]
Texas Wide Open For Business, The Texas Renewable Energy Industry, 2014
Trip Doggett, ERCOT Update, July 23, 2014
U.S. Energy Information Administration, Electric Power Monthly, March 2015
Warren Katzenstein, Emily Fertig and Jay Apt, The variability of interconnected wind plants,
Energy Policy 38, 2010