This document discusses the development of an integrated product and process information management system called HIPPY for the civil engineering and construction industry. HIPPY aims to better classify and transfer construction information between design and construction stages and project team members. It describes the prototype database system that was developed to coordinate and manage both product and process information during construction projects using a high-level construction facility as an example. The system offers an overall description of its scope, requirements and objectives to model the integration of product and process information in a hierarchical manner for improved project performance, communication and collaborative teamwork.
IRJET- Role and Scope of Information and Communication Technology (ICT) in Co...IRJET Journal
This document discusses the role and scope of information and communication technology (ICT) in the construction industry in India. It first provides background on the complex nature of construction projects and the need for effective communication among various project participants. It then reviews literature showing that while ICT tools can enhance productivity, coordination and decision-making, adoption of these tools in the construction industry has been slow. The document goes on to discuss how ICT can benefit the industry, organizations and participants at different project stages by improving information management, documentation and communication. Barriers to ICT implementation in the Indian construction context are also mentioned.
A REVIEW OF ICT TECHNOLOGY IN CONSTRUCTIONIJMIT JOURNAL
A growing awareness in the construction industry has emerged to pay a sharp attention to ICT as a catalyst that would itigate the deficiencies characterized by this industry. In comparison with other cited review articles, this paper is aimed to 1) compile the research published on “ICT Technologies” in
correspondence to “Construction Tasks” in the construction industry over the past two decades (1996- 2016), 2) demonstrate the trends and patterns in the use of different types of ICT Technologies 3) discuss the correspondence of the identified ICT Technologies to the identified Construction Tasks and 4) exhibit the construction needs of ICT. By the employment of a five phases profiling methodology, a set of 68 out of 202 articles and papers indexed by Elsevier’s Scopus database was considered relevant for the current review paper. This research is targeting the beginning researchers and practitioners in the field of ICT in construction.
Cloud Computing Role in Information technologyKHakash
Simply put, cloud computing is the delivery of computing services—including servers, storage, databases, networking, software, analytics, and intelligence—over the Internet (“the cloud”) to offer faster innovation, flexible resources, and economies of scale.
Information technology (IT) is part of the value chain and corporate strategy of companies (PORTER, 1998). This area has been highlighted by its rapid development being responsible for several technological innovations, which affect the strategic positioning of companies. In the 1970s the computing model based on both proprietary technology and high cost large computers, known as mainframes, contributed to the formation of oligopolies in companies providing IT services which provided data processing to consumer companies.
An important factor in the construction of an information model of a construction
object is that various participants in the process of modeling construction objects work
with different, sometimes contradictory information obtained at different stages. Based
on the concept of life cycle management (life cycle) of construction objects, all
information obtained at the previous stages from different participants should describe
it as a single information object, around which various processes take place: design,
construction, operation, repair and diagnostics of the technical condition, each of which
uses and adds to the information model or that information about the object. The article
deals with the problem of generalization of construction information on construction
objects
The document discusses web-based document management systems in the construction industry. It notes that the construction industry has traditionally been fragmented with poor communication. Web-based document management systems have been adopted to improve information storage, retrieval, and sharing among project teams. The document reviews previous research on the benefits of these systems, including improved communication, accountability, and project management. It also examines the perspectives of construction practitioners in Hong Kong on using these systems through questionnaires and interviews.
Present Day Internet Design, Architecture, Performance and an Improved DesignEvaObinna
Internet design has to do with its architecture. Internet architecture is a meta-network that constantly changes collection of thousands of individual network that intercommunicate with common protocol. The success of the present day internet has been hindered by many sophisticated network attacks because of its security challenges embedded in the original architecture. The original architecture is hard to modify and new functions have to be implemented via myopic and clumsy adhoc patches on top of the existing architecture. This work aimed at analyzing the present day internet design, emphasizing on its architecture, performance and then proposing an improved design with clear reasons for the improvement.
Development of a web based decision support system for materials selection in...IAEME Publication
This document describes the development of a web-based decision support system for materials selection in construction projects. It proposes a framework that includes a database to store materials information and a decision support component to evaluate materials based on selection criteria. A web interface is developed to allow project participants in different locations to access and manage materials data. The system aims to standardize and automate the materials selection process for construction engineering projects. It discusses developing a conceptual model and database, as well as interfaces like a materials controller to input, view and evaluate options based on criteria like cost, durability and environmental impacts.
AN APPROACH TO EXTRACTING DISTRIBUTED DATA FROM THE INTEGRATED ENVIRONMENT OF...ijcsit
This document discusses approaches for extracting and modeling distributed data from integrated web technologies based on set theory. It proposes a management approach for distributed information that involves data warehousing techniques, data fragmentation, and distributed query optimization. A mathematical model is developed using concepts from set theory to conceptualize how data from different sources can be combined into an integrated environment. An algorithm is also proposed to compute the execution time of queries on this distributed data based on the set theory composition model.
IRJET- Role and Scope of Information and Communication Technology (ICT) in Co...IRJET Journal
This document discusses the role and scope of information and communication technology (ICT) in the construction industry in India. It first provides background on the complex nature of construction projects and the need for effective communication among various project participants. It then reviews literature showing that while ICT tools can enhance productivity, coordination and decision-making, adoption of these tools in the construction industry has been slow. The document goes on to discuss how ICT can benefit the industry, organizations and participants at different project stages by improving information management, documentation and communication. Barriers to ICT implementation in the Indian construction context are also mentioned.
A REVIEW OF ICT TECHNOLOGY IN CONSTRUCTIONIJMIT JOURNAL
A growing awareness in the construction industry has emerged to pay a sharp attention to ICT as a catalyst that would itigate the deficiencies characterized by this industry. In comparison with other cited review articles, this paper is aimed to 1) compile the research published on “ICT Technologies” in
correspondence to “Construction Tasks” in the construction industry over the past two decades (1996- 2016), 2) demonstrate the trends and patterns in the use of different types of ICT Technologies 3) discuss the correspondence of the identified ICT Technologies to the identified Construction Tasks and 4) exhibit the construction needs of ICT. By the employment of a five phases profiling methodology, a set of 68 out of 202 articles and papers indexed by Elsevier’s Scopus database was considered relevant for the current review paper. This research is targeting the beginning researchers and practitioners in the field of ICT in construction.
Cloud Computing Role in Information technologyKHakash
Simply put, cloud computing is the delivery of computing services—including servers, storage, databases, networking, software, analytics, and intelligence—over the Internet (“the cloud”) to offer faster innovation, flexible resources, and economies of scale.
Information technology (IT) is part of the value chain and corporate strategy of companies (PORTER, 1998). This area has been highlighted by its rapid development being responsible for several technological innovations, which affect the strategic positioning of companies. In the 1970s the computing model based on both proprietary technology and high cost large computers, known as mainframes, contributed to the formation of oligopolies in companies providing IT services which provided data processing to consumer companies.
An important factor in the construction of an information model of a construction
object is that various participants in the process of modeling construction objects work
with different, sometimes contradictory information obtained at different stages. Based
on the concept of life cycle management (life cycle) of construction objects, all
information obtained at the previous stages from different participants should describe
it as a single information object, around which various processes take place: design,
construction, operation, repair and diagnostics of the technical condition, each of which
uses and adds to the information model or that information about the object. The article
deals with the problem of generalization of construction information on construction
objects
The document discusses web-based document management systems in the construction industry. It notes that the construction industry has traditionally been fragmented with poor communication. Web-based document management systems have been adopted to improve information storage, retrieval, and sharing among project teams. The document reviews previous research on the benefits of these systems, including improved communication, accountability, and project management. It also examines the perspectives of construction practitioners in Hong Kong on using these systems through questionnaires and interviews.
Present Day Internet Design, Architecture, Performance and an Improved DesignEvaObinna
Internet design has to do with its architecture. Internet architecture is a meta-network that constantly changes collection of thousands of individual network that intercommunicate with common protocol. The success of the present day internet has been hindered by many sophisticated network attacks because of its security challenges embedded in the original architecture. The original architecture is hard to modify and new functions have to be implemented via myopic and clumsy adhoc patches on top of the existing architecture. This work aimed at analyzing the present day internet design, emphasizing on its architecture, performance and then proposing an improved design with clear reasons for the improvement.
Development of a web based decision support system for materials selection in...IAEME Publication
This document describes the development of a web-based decision support system for materials selection in construction projects. It proposes a framework that includes a database to store materials information and a decision support component to evaluate materials based on selection criteria. A web interface is developed to allow project participants in different locations to access and manage materials data. The system aims to standardize and automate the materials selection process for construction engineering projects. It discusses developing a conceptual model and database, as well as interfaces like a materials controller to input, view and evaluate options based on criteria like cost, durability and environmental impacts.
AN APPROACH TO EXTRACTING DISTRIBUTED DATA FROM THE INTEGRATED ENVIRONMENT OF...ijcsit
This document discusses approaches for extracting and modeling distributed data from integrated web technologies based on set theory. It proposes a management approach for distributed information that involves data warehousing techniques, data fragmentation, and distributed query optimization. A mathematical model is developed using concepts from set theory to conceptualize how data from different sources can be combined into an integrated environment. An algorithm is also proposed to compute the execution time of queries on this distributed data based on the set theory composition model.
The sustainable management of remote construction projectsBhzad Sidawi
This document discusses the sustainable management of remote construction projects in Saudi Arabia. It investigates the use of computer-based project management systems (CPMS) to help manage projects more efficiently and apply sustainability principles. A field survey found that traditional management systems are very popular, while CPMS are underutilized. Respondents felt CPMS could help address some issues if tailored to the needs of the Saudi Electric Company and its projects. However, changes are also needed to current management practices to make them more sustainable and efficient.
Next generation big data analytics state of the artNazrul Islam
This document reviews recent research on network big data, including different data types (online network data, mobile/IoT data, geography data, spatial temporal data, streaming/real-time data, and visual data), storage models, privacy and security issues, analysis methods, and applications. It discusses the trends in network big data moving from simple online social network data to include more data sources and data that has spatial, temporal, and real-time components. The challenges of analyzing large and diverse datasets from networks are also addressed.
Document Engineering is a methodology that spans information analysis, business process modeling, electronic publishing, and service-oriented architecture. It focuses on reusing information and process patterns when analyzing and designing systems involving documents. As business activity always involves both transactional and narrative documents, analysis methods must consider documents across the full "Document Type Spectrum". Document Engineering emphasizes creating good models by understanding the relationships between organizational processes, business information, and document exchange patterns.
This paper introduces the concepts of Hypermedia and Hypertext systems as tools for managing information in the field of architecture and enhancing the landscape of education. An application developed by the author is used to illustrate the use of Hypertext programs in architectural education. Paradox, a powerful relational database program, is used to develop an application illustrating the works and philosophies of twentieth century masters of architecture. The paper recommends the development of similar applications to be available for students through computer networks, as tools for managing growing amounts of information and enhancing the landscape of learning.
Business Forms Management on Corporate IntranetsCraig Burma
In 1999, paper business forms dominated businesses. Intranets were the untested platform. This Thesis focused on the tension between what I called Business Forms "paper pushers" and Intranet "propeller heads."
My research corrected predicted how 1) telecommunications advances 2) virtual partnerships 3) information security and 4) legal requirements would force these two groups to work together in the ways that I outlined.
This thesis was the foundation upon which I built a significant portion of my career.
This document provides an introduction to a study on the roles and impact of information and communication technology (ICT) in the construction field of quantity surveying. It discusses how ICT is used throughout the entire construction process. The document reviews literature on ICT implementation in construction, identifying factors like technological characteristics, individual characteristics, managerial support, and knowledge sharing that influence successful ICT implementation. It analyzes ICT implementation as an innovation task and explains how integrating concepts from innovation diffusion, change management, and knowledge sharing can help explain ICT diffusion during the implementation stage.
A HEALTH RESEARCH COLLABORATION CLOUD ARCHITECTUREijccsa
Cloud computing platforms used for research collaborations within public health domains are limited in terms of how service components are organized and provisioned. This challenge is intensified by platform level challenges of transparency, confidentiality, privacy and trust. Addressing these collaboration issues will necessitate that components are reorganized. There is a need for secure and efficient approaches of reorganizing the service components, with trust to support collaboration related requirements. Through iterative design, a reliable and trust-aware re-organization of cloud components – the Collaboration cloud architecture is achieved. We utilize SOA, Privacy-By-Design principles and insights from blockchain to enforce trust. We illustrate its potential with multi-layer security process flow based on server-to-client tokens, Role-based Access Control and the traditional authentication – username and password with assurance for privacy and trust. The architecture shows promise towards data governance and the overall management of internal or external data flows.
SUITABILITY OF SERVICE ORIENTED ARCHITECTURE FOR SOLVING GIS PROBLEMSijait
Nowadays spatial data is becoming as a key element for effective planning and decision making in all aspects of societies. Spatial data are those data which are related to the features on the ground. In this way, a Geographic Information System (GIS) is a system that captures, analyzes, and manages any spatially referenced data. This paper analyzes the architecture and main features of Geographic Information Systems and aims at discussing some important problems emerged in the research of applying GIS in the organizations. It focuses on some of them such as lack of interoperability, agility and business alignment. We explain that SOA as a service oriented software architecture model can support the transformation of geographic information software from "system and function" to "service and application" and as the best practice of the architectural concepts can increase business alignment in the enterprise applications.
Cloud computing has become the mainstream of the emerging technologies for information interchange and accessibility. With such systems, the information accessed from any geographic location on this planet with some decent kind of internet connection. Applying machine learning together with artificial intelligence in dealing with the problem of energy reduction in cloud data center is an innovative idea. A large combination of Artificial intelligence is playing a significant role in cloud environment. For that matter, the Big organization providers like Amazon have taken steps to ensure that they can continue to expand their fast-growing cloud services to commensurate with the fast growth of population. These companies have built large data centers in remote parts of the world to overcome a shortage of information. These centers consume significant amounts of electrical energy. There is often a lot of energy wastage. According to IDC white paper, data centers have tremendously wasted billions of energy regarding billing and cash. Additionally, researchers have argued that by the year 2020 the energy consumption rate would have doubled. Research in this area is still a hot topic. This paper seeks to address the energy efficiency issue at a Cloud Data Center using machine learning methodologies, principles, and practices. This article also aims to bring out possible future implementation methods for artificially intelligent agents that would help reduce energy wastage at a Cloud data center and thus help ameliorate the great big energy problem at hand.
Data Quality as a Business Success FactorBoris Otto
The document discusses data quality as a business success factor. It provides two case studies: (1) At automotive supplier ZF Friedrichshafen AG, consistent and accurate master data is required for customer relationship management. (2) At Bayer CropScience, root causes of poor data quality were identified, including a lack of data quality training and heterogeneous data maintenance tools. The document emphasizes that corporate data quality management relates to business strategy and should follow a lifecycle approach. Benefits of improved data quality can include inventory savings and reduced costs of obsolete records.
This document summarizes a research article that investigates the factors influencing IT professionals' intention to use cloud-based applications and solutions. The researchers tested an extended technology acceptance model on 155 IT professionals in Saudi Arabia. The model considered individual characteristics, organizational context, technological context, and social context. The model explained 74% of the intention to use cloud-based applications. The findings showed that accessibility of technology, perceived vulnerabilities, individual characteristics, and social image were important determinants for using cloud applications.
Inclusive Futures for Europe. Beyond the Impacts of Industry 4.0 and Digital ...BEYOND4.0
The document discusses a project analyzing future skills needed for digital transformation in Europe. It outlines the project's goals of understanding future skills demands from employers, implications for vocational education, and opportunities for inclusiveness. The project aims to create a framework for classifying new skills and better skills data. It then presents the project's conceptualization of skills categorization, with groups like digital skills, professional skills, and analogous skills like complex thinking, social skills, and self-management. Within each category are examples of specific skills identified as important for future work.
The document discusses several topics related to qualitative modeling and the Garp3 software. It introduces an e-learning module that guides users through an integrated environmental impact assessment process. It also describes a model repository that allows users to share, search, and reuse qualitative models. Finally, it discusses the Qualitative Reasoning and Modeling portal, which provides information about Garp3 and related issues.
CLOUD COMPUTING IN THE PUBLIC SECTOR: MAPPING THE KNOWLEDGE DOMAINijmpict
This document summarizes a research study that mapped the knowledge domain of public sector cloud computing. The study utilized 188 research publications from the Web of Science database and the CiteSpace visualization software. Key findings included:
1) The top publishing countries were Canada, the US, Australia, China, and the UK. The top institutions were from Malaysia, Australia, and the UK.
2) Author collaboration was limited, though a few nascent research clusters were identified. The most published authors were from the Middle East, Malaysia, Australia, and China. The most co-cited authors focused on cloud standards and technologies.
3) The top co-cited journals were Communications of the ACM, NIST Special
Comparative analysis of energy efficient scheduling algorithms for big data a...nexgentechnology
GET IEEE BIG DATA, JAVA ,DOTNET,ANDROID ,NS2,MATLAB,EMBEDED AT LOW COST WITH BEST QUALITY PLEASE CONTACT BELOW NUMBER
FOR MORE INFORMATION PLEASE FIND THE BELOW DETAILS:
Nexgen Technology
No :66,4th cross,Venkata nagar,
Near SBI ATM,
Puducherry.
Email Id: praveen@nexgenproject.com
Mobile: 9791938249
Telephone: 0413-2211159
www.nexgenproject.com
Fuzzy folded bloom filter-as-a-service for big data storage in the cloudnexgentechnology
GET IEEE BIG DATA, JAVA ,DOTNET,ANDROID ,NS2,MATLAB,EMBEDED AT LOW COST WITH BEST QUALITY PLEASE CONTACT BELOW NUMBER
FOR MORE INFORMATION PLEASE FIND THE BELOW DETAILS:
Nexgen Technology
No :66,4th cross,Venkata nagar,
Near SBI ATM,
Puducherry.
Email Id: praveen@nexgenproject.com
Mobile: 9791938249
Telephone: 0413-2211159
www.nexgenproject.com
This document discusses challenges and outlooks related to big data. It begins with an introduction describing how big data is being collected and analyzed in various fields such as science, education, healthcare, urban planning, and more. It then outlines the key phases in big data analysis: data acquisition and recording, information extraction and cleaning, data integration and representation, query processing and analysis, and result interpretation. For each phase, it discusses challenges and how existing techniques can be applied or extended to address big data issues. Some of the major challenges discussed are data scale, heterogeneity, lack of structure, privacy, timeliness, provenance, and visualization across the entire big data analysis pipeline.
The Contribution of Information Technology Infrastructure in the Information ...IJRES Journal
There are some great innovations in e-government during the past decade. And there is intense competition between some governments and leaders in the supply of services on the Internet. Some countries do not want to stay behind in this area, where many governments have developed detailed strategies to realize the e-government programs. Despite differences in goals behind these programs from one country to another, but there are still many points of convergence between them particularly in information technology infrastructure field. However, Problems associated with the process of application and adoption of e-government due to poor systems and infrastructure construction, which negatively affects the adoption of the public services through the e-government portal, in particular in developing countries. This study argued contribution the information technology Infrastructure in Information Systems success in e-government agencies. Where there are weaknesses in the understanding of this contribution and its importance in many developing countries, so the researcher proposed a model to clarify this contribution, and expected a positive relationship between the information technology infrastructure factors and information systems success, and this affects positively or negatively the adoption of e-government.
Insights on critical energy efficiency approaches in internet-ofthings applic...IJECEIAES
This document summarizes approaches to improving energy efficiency in internet-of-things (IoT) applications. It discusses how cross-layer schemes can be used to optimize network performance and energy efficiency in IoT systems. It also examines optimization-based approaches using machine learning techniques. While various studies have identified methods to improve energy efficiency, open issues remain that need to be addressed to further enhance IoT system performance and outcomes.
El documento trata sobre la evolución de la tecnología educativa desde su surgimiento en los Estados Unidos en la década de 1950 hasta diferentes enfoques y tendencias actuales. También discute aplicaciones de la tecnología educativa a la pedagogía y modelos de distribución de tecnología en las escuelas, incluyendo el modelo de laboratorio de informática y el modelo 1 a 1 con dispositivos móviles.
Technology’s Impact on the Future of Meeting Space — Will You Be Ready?Social Tables
ST's Ram Parimi on technology's impact on the future of meeting space, as presented at #HTNG2016's Middle East Conference.
For an appendix of presentation notes, please visit: https://docs.google.com/document/d/1A7mAe-BSYrAcpOUYGNqUawKnYpAas0aJQdothizMP2s/edit
Gabriel NeumanBonder de Teknobuilding explica dos formas de ganar dinero con Factura Móvil: 1) Revendiendo facturas a un precio mayor después de comprarlas a un precio reducido en volumen, y 2) Recomendando Factura Móvil y recibiendo comisiones de hasta 35% por las compras de los recomendados. El pago de comisiones se realiza mensualmente siempre que se envíe la factura.
The sustainable management of remote construction projectsBhzad Sidawi
This document discusses the sustainable management of remote construction projects in Saudi Arabia. It investigates the use of computer-based project management systems (CPMS) to help manage projects more efficiently and apply sustainability principles. A field survey found that traditional management systems are very popular, while CPMS are underutilized. Respondents felt CPMS could help address some issues if tailored to the needs of the Saudi Electric Company and its projects. However, changes are also needed to current management practices to make them more sustainable and efficient.
Next generation big data analytics state of the artNazrul Islam
This document reviews recent research on network big data, including different data types (online network data, mobile/IoT data, geography data, spatial temporal data, streaming/real-time data, and visual data), storage models, privacy and security issues, analysis methods, and applications. It discusses the trends in network big data moving from simple online social network data to include more data sources and data that has spatial, temporal, and real-time components. The challenges of analyzing large and diverse datasets from networks are also addressed.
Document Engineering is a methodology that spans information analysis, business process modeling, electronic publishing, and service-oriented architecture. It focuses on reusing information and process patterns when analyzing and designing systems involving documents. As business activity always involves both transactional and narrative documents, analysis methods must consider documents across the full "Document Type Spectrum". Document Engineering emphasizes creating good models by understanding the relationships between organizational processes, business information, and document exchange patterns.
This paper introduces the concepts of Hypermedia and Hypertext systems as tools for managing information in the field of architecture and enhancing the landscape of education. An application developed by the author is used to illustrate the use of Hypertext programs in architectural education. Paradox, a powerful relational database program, is used to develop an application illustrating the works and philosophies of twentieth century masters of architecture. The paper recommends the development of similar applications to be available for students through computer networks, as tools for managing growing amounts of information and enhancing the landscape of learning.
Business Forms Management on Corporate IntranetsCraig Burma
In 1999, paper business forms dominated businesses. Intranets were the untested platform. This Thesis focused on the tension between what I called Business Forms "paper pushers" and Intranet "propeller heads."
My research corrected predicted how 1) telecommunications advances 2) virtual partnerships 3) information security and 4) legal requirements would force these two groups to work together in the ways that I outlined.
This thesis was the foundation upon which I built a significant portion of my career.
This document provides an introduction to a study on the roles and impact of information and communication technology (ICT) in the construction field of quantity surveying. It discusses how ICT is used throughout the entire construction process. The document reviews literature on ICT implementation in construction, identifying factors like technological characteristics, individual characteristics, managerial support, and knowledge sharing that influence successful ICT implementation. It analyzes ICT implementation as an innovation task and explains how integrating concepts from innovation diffusion, change management, and knowledge sharing can help explain ICT diffusion during the implementation stage.
A HEALTH RESEARCH COLLABORATION CLOUD ARCHITECTUREijccsa
Cloud computing platforms used for research collaborations within public health domains are limited in terms of how service components are organized and provisioned. This challenge is intensified by platform level challenges of transparency, confidentiality, privacy and trust. Addressing these collaboration issues will necessitate that components are reorganized. There is a need for secure and efficient approaches of reorganizing the service components, with trust to support collaboration related requirements. Through iterative design, a reliable and trust-aware re-organization of cloud components – the Collaboration cloud architecture is achieved. We utilize SOA, Privacy-By-Design principles and insights from blockchain to enforce trust. We illustrate its potential with multi-layer security process flow based on server-to-client tokens, Role-based Access Control and the traditional authentication – username and password with assurance for privacy and trust. The architecture shows promise towards data governance and the overall management of internal or external data flows.
SUITABILITY OF SERVICE ORIENTED ARCHITECTURE FOR SOLVING GIS PROBLEMSijait
Nowadays spatial data is becoming as a key element for effective planning and decision making in all aspects of societies. Spatial data are those data which are related to the features on the ground. In this way, a Geographic Information System (GIS) is a system that captures, analyzes, and manages any spatially referenced data. This paper analyzes the architecture and main features of Geographic Information Systems and aims at discussing some important problems emerged in the research of applying GIS in the organizations. It focuses on some of them such as lack of interoperability, agility and business alignment. We explain that SOA as a service oriented software architecture model can support the transformation of geographic information software from "system and function" to "service and application" and as the best practice of the architectural concepts can increase business alignment in the enterprise applications.
Cloud computing has become the mainstream of the emerging technologies for information interchange and accessibility. With such systems, the information accessed from any geographic location on this planet with some decent kind of internet connection. Applying machine learning together with artificial intelligence in dealing with the problem of energy reduction in cloud data center is an innovative idea. A large combination of Artificial intelligence is playing a significant role in cloud environment. For that matter, the Big organization providers like Amazon have taken steps to ensure that they can continue to expand their fast-growing cloud services to commensurate with the fast growth of population. These companies have built large data centers in remote parts of the world to overcome a shortage of information. These centers consume significant amounts of electrical energy. There is often a lot of energy wastage. According to IDC white paper, data centers have tremendously wasted billions of energy regarding billing and cash. Additionally, researchers have argued that by the year 2020 the energy consumption rate would have doubled. Research in this area is still a hot topic. This paper seeks to address the energy efficiency issue at a Cloud Data Center using machine learning methodologies, principles, and practices. This article also aims to bring out possible future implementation methods for artificially intelligent agents that would help reduce energy wastage at a Cloud data center and thus help ameliorate the great big energy problem at hand.
Data Quality as a Business Success FactorBoris Otto
The document discusses data quality as a business success factor. It provides two case studies: (1) At automotive supplier ZF Friedrichshafen AG, consistent and accurate master data is required for customer relationship management. (2) At Bayer CropScience, root causes of poor data quality were identified, including a lack of data quality training and heterogeneous data maintenance tools. The document emphasizes that corporate data quality management relates to business strategy and should follow a lifecycle approach. Benefits of improved data quality can include inventory savings and reduced costs of obsolete records.
This document summarizes a research article that investigates the factors influencing IT professionals' intention to use cloud-based applications and solutions. The researchers tested an extended technology acceptance model on 155 IT professionals in Saudi Arabia. The model considered individual characteristics, organizational context, technological context, and social context. The model explained 74% of the intention to use cloud-based applications. The findings showed that accessibility of technology, perceived vulnerabilities, individual characteristics, and social image were important determinants for using cloud applications.
Inclusive Futures for Europe. Beyond the Impacts of Industry 4.0 and Digital ...BEYOND4.0
The document discusses a project analyzing future skills needed for digital transformation in Europe. It outlines the project's goals of understanding future skills demands from employers, implications for vocational education, and opportunities for inclusiveness. The project aims to create a framework for classifying new skills and better skills data. It then presents the project's conceptualization of skills categorization, with groups like digital skills, professional skills, and analogous skills like complex thinking, social skills, and self-management. Within each category are examples of specific skills identified as important for future work.
The document discusses several topics related to qualitative modeling and the Garp3 software. It introduces an e-learning module that guides users through an integrated environmental impact assessment process. It also describes a model repository that allows users to share, search, and reuse qualitative models. Finally, it discusses the Qualitative Reasoning and Modeling portal, which provides information about Garp3 and related issues.
CLOUD COMPUTING IN THE PUBLIC SECTOR: MAPPING THE KNOWLEDGE DOMAINijmpict
This document summarizes a research study that mapped the knowledge domain of public sector cloud computing. The study utilized 188 research publications from the Web of Science database and the CiteSpace visualization software. Key findings included:
1) The top publishing countries were Canada, the US, Australia, China, and the UK. The top institutions were from Malaysia, Australia, and the UK.
2) Author collaboration was limited, though a few nascent research clusters were identified. The most published authors were from the Middle East, Malaysia, Australia, and China. The most co-cited authors focused on cloud standards and technologies.
3) The top co-cited journals were Communications of the ACM, NIST Special
Comparative analysis of energy efficient scheduling algorithms for big data a...nexgentechnology
GET IEEE BIG DATA, JAVA ,DOTNET,ANDROID ,NS2,MATLAB,EMBEDED AT LOW COST WITH BEST QUALITY PLEASE CONTACT BELOW NUMBER
FOR MORE INFORMATION PLEASE FIND THE BELOW DETAILS:
Nexgen Technology
No :66,4th cross,Venkata nagar,
Near SBI ATM,
Puducherry.
Email Id: praveen@nexgenproject.com
Mobile: 9791938249
Telephone: 0413-2211159
www.nexgenproject.com
Fuzzy folded bloom filter-as-a-service for big data storage in the cloudnexgentechnology
GET IEEE BIG DATA, JAVA ,DOTNET,ANDROID ,NS2,MATLAB,EMBEDED AT LOW COST WITH BEST QUALITY PLEASE CONTACT BELOW NUMBER
FOR MORE INFORMATION PLEASE FIND THE BELOW DETAILS:
Nexgen Technology
No :66,4th cross,Venkata nagar,
Near SBI ATM,
Puducherry.
Email Id: praveen@nexgenproject.com
Mobile: 9791938249
Telephone: 0413-2211159
www.nexgenproject.com
This document discusses challenges and outlooks related to big data. It begins with an introduction describing how big data is being collected and analyzed in various fields such as science, education, healthcare, urban planning, and more. It then outlines the key phases in big data analysis: data acquisition and recording, information extraction and cleaning, data integration and representation, query processing and analysis, and result interpretation. For each phase, it discusses challenges and how existing techniques can be applied or extended to address big data issues. Some of the major challenges discussed are data scale, heterogeneity, lack of structure, privacy, timeliness, provenance, and visualization across the entire big data analysis pipeline.
The Contribution of Information Technology Infrastructure in the Information ...IJRES Journal
There are some great innovations in e-government during the past decade. And there is intense competition between some governments and leaders in the supply of services on the Internet. Some countries do not want to stay behind in this area, where many governments have developed detailed strategies to realize the e-government programs. Despite differences in goals behind these programs from one country to another, but there are still many points of convergence between them particularly in information technology infrastructure field. However, Problems associated with the process of application and adoption of e-government due to poor systems and infrastructure construction, which negatively affects the adoption of the public services through the e-government portal, in particular in developing countries. This study argued contribution the information technology Infrastructure in Information Systems success in e-government agencies. Where there are weaknesses in the understanding of this contribution and its importance in many developing countries, so the researcher proposed a model to clarify this contribution, and expected a positive relationship between the information technology infrastructure factors and information systems success, and this affects positively or negatively the adoption of e-government.
Insights on critical energy efficiency approaches in internet-ofthings applic...IJECEIAES
This document summarizes approaches to improving energy efficiency in internet-of-things (IoT) applications. It discusses how cross-layer schemes can be used to optimize network performance and energy efficiency in IoT systems. It also examines optimization-based approaches using machine learning techniques. While various studies have identified methods to improve energy efficiency, open issues remain that need to be addressed to further enhance IoT system performance and outcomes.
El documento trata sobre la evolución de la tecnología educativa desde su surgimiento en los Estados Unidos en la década de 1950 hasta diferentes enfoques y tendencias actuales. También discute aplicaciones de la tecnología educativa a la pedagogía y modelos de distribución de tecnología en las escuelas, incluyendo el modelo de laboratorio de informática y el modelo 1 a 1 con dispositivos móviles.
Technology’s Impact on the Future of Meeting Space — Will You Be Ready?Social Tables
ST's Ram Parimi on technology's impact on the future of meeting space, as presented at #HTNG2016's Middle East Conference.
For an appendix of presentation notes, please visit: https://docs.google.com/document/d/1A7mAe-BSYrAcpOUYGNqUawKnYpAas0aJQdothizMP2s/edit
Gabriel NeumanBonder de Teknobuilding explica dos formas de ganar dinero con Factura Móvil: 1) Revendiendo facturas a un precio mayor después de comprarlas a un precio reducido en volumen, y 2) Recomendando Factura Móvil y recibiendo comisiones de hasta 35% por las compras de los recomendados. El pago de comisiones se realiza mensualmente siempre que se envíe la factura.
Flávio Medeiros é um designer gráfico com foco em web e vasta experiência na criação de layouts para sites e peças de marketing digital. Ele busca ampliar sua base de clientes oferecendo seus serviços de forma remota por meio de um fee mensal.
Press Release Prevenção e Segurança Rodoviáriaguest257b5
A Civilizaçao Activa em parceria com a United Photo Press vai realizar uma exposição fotográfica sobre prevenção e segurança rodoviária. A exposição vai apresentar fotografias de vários países com diferentes perspectivas sobre o tema. Fotógrafos de todo o mundo podem submeter até 3 fotografias gratuitamente até 31 de Maio de 2009 para serem incluídas na exposição.
The document discusses re-engineering the Eclipse MDT/OCL project to use Xtext. It describes how Xtext requires changes to the parser architecture and grammar approach used by MDT/OCL. While Xtext reduces the size of the grammar and generates editor support, it increases parser size and slows performance. The document evaluates tradeoffs and outlines ongoing work to address performance issues.
Este documento describe las complicaciones de la anestesia locorregional, clasificándolas en anatómicas (vasculares, respiratorias y neurológicas) y fisiológicas (locales, sistémicas y otras). Las complicaciones anatómicas incluyen hematomas, toxicidad arterial, parálisis respiratoria y anestesia intradural total. Las complicaciones fisiológicas son neurotoxicidad y miotoxicidad locales, así como toxicidad del sistema nervioso central y cardiovascular sistémica. El tratamiento depende de la complicación específica
Este documento describe un servicio de tutoría para emprendedores ofrecido por frog+fer. El servicio ayuda a los emprendedores a superar los desafíos de crecimiento de sus empresas mediante sesiones periódicas de asesoramiento y supervisión durante 18-24 meses. El programa de tutoría incluye fases de inmersión, elaboración de una hoja de ruta, ejecución del plan y supervisión continua. El objetivo es ayudar a los emprendedores a asumir un papel de liderazgo a medida que sus empresas cre
This letter from Faeza Khan of the Labour Market Regulatory Authority provides a commendation for Mohammed Nayeem of Tata Consultancy Services for his work on the Labour Market Reform Project over the past year. The letter praises Nayeem for his highly respectful attitude, great conduct, high values and morals. It also commends his high performance, tireless dedication, and professional and personal support, which were greatly beneficial to building the relationship between the LMRA and TCS. The letter recommends Nayeem for future projects and wishes him the best in his future endeavors.
The document describes the E482 controller from Electroserv, which is suitable for a range of industrial applications. It has features like PID control, timer functions, inputs/outputs and communication protocols. The summary discusses how the E482 can be used to control batch operations in ovens/kilns, plastic extrusion processes, and chillers for plastic equipment to improve productivity, quality and reliability. Its precise control and programmability allow it to consolidate functions and replace multiple devices.
Este documento proporciona instrucciones para analizar frases en latín activas y pasivas. Incluye ejercicios para traducir frases al latín en voz activa y pasiva, analizar palabras y frases morfológica y sintácticamente, y explicar la formación de verbos en voz pasiva.
El documento invita a compositores e intérpretes de música alternativa y urbana a participar en el Festival Florencia Rock 2015 organizado por Arawana Home Studio y Fardes. El festival ofrece una oportunidad para que agrupaciones independientes muestren su talento musical durante el proceso de selección y en el evento. La primera etapa de inscripción se llevará a cabo del 26 de junio al 24 de julio de 2015.
The document discusses sustainability practices in collegiate food services. It includes presentations from several university dining directors on their green certification efforts, local and organic food procurement, composting and recycling programs, and other environmental initiatives. The Yale director discusses establishing a sustainability plan, learning technical terms, and prioritizing existing sustainable practices over demanding new options.
This document provides a summary of a presentation on housing and resettlement in Khokana, Nepal. It includes 3 main points:
1. The presentation proposes regenerating Khokana through tourism-based and agricultural economic designs, as well as disaster-resilient infrastructure. It outlines two proposed tourist routes and commercial areas focused on handicrafts.
2. Housing designs are proposed, including two dwelling types (Types A and B) ranging from 980 to 1175 square feet over 1-3 floors. Floor plans and elevations are provided.
3. Institutional designs are proposed for a health clinic, museum, commercial complex, and recreational block. Renderings of these buildings are included. The master
El documento analiza la situación actual de la educación secundaria en América Latina, caracterizando la crisis de la escuela y el agotamiento de su sentido tradicional. Explica que la escuela moderna tenía la función de difundir los valores de la modernidad, pero que ahora su formato tradicional y su enfoque disciplinario no son adecuados para la cultura contemporánea. También describe cómo la escuela originalmente tenía un rol de selección pero ahora intenta la universalización, lo que ha llevado a una fragmentación del sistema educativo.
El rol del community manager en las organizaciones - Casos de éxito en la emp...Santiago Bonet
Ponencia realizada en el marco del Curso de verano 2011 - Universidad de Murcia: El rol de responsable de comunidad en las organizaciones (Commmunity Manager)
http://www.um.es/unimar/ficha-curso.php?estado=V&cc=50884
donde tuve el placer de coincidir con ponentes como Dolors Reig (UOC), Alfonso Alcantara (Servicio Andaluz de Empleo) o Millán Berzosa (Ideas4All).
A presentation I delivered to the Richmond JUG on the evolution of HTML through XHTML to HTML5 and some of the technologies that support implementation now, before a specification is reached by the WHATWG/W3C
The document lists various equipment for producing and modifying bitumen emulsions and collections tanks, including:
- UVB-1 bitumen emulsion units with production capacities of 1, 2, and 8 m3/hour for producing bitumen emulsions.
- A UVB-2 bitumen modification unit with capacities of 4 and 20 m3/hour for modifying bitumen by adding polymers and other additives.
- Auxiliary equipment like colloid mills, pumps, and a SBE-30 bitumen collection tank. specifications for each piece of equipment are provided.
Whitepaper: "Construction Lifecycle Management – a necessary business strateg...Ionel GRECESCU
Historically, Product Lifecycle Management vendors have supported AEC solutions while Enterprise Resource Planning vendors have been focusing on the EPC side of the AEC/EPC ecosystem.
It is time to adopt a holistic approach to Construction Lifecycle and both, PLM and ERP vendors, must provide new technologies and solutions to promote efficient collaboration between Construction disciplines and streamline Business Practices that result in increased profitability and significant savings for their customers.
Construction Lifecycle Management promotes new ways of thinking and doing business, aiming to achieve Lean by delivering an innovative Construction Process Integration framework to manage holistically all the phases of the Lifecycle of a Capital Asset: design, build, operate and retirement.
DIGITAL CONSTRUCTION: A Holistic Approach on Continuum Design - Construction ...Premier Publishers
The prevalence of the network paradigm in all sectors of human activity is connected not only to important changes in the ontology, the methodology and the design and construction tools, but also to changes in the relations between design and construction. Within the above frame, the present essay will attempt to describe the methodology and the learning environment to develop the skills of designers so that they can correspond to the new data shaped by the network paradigm. Firstly, the basic steps of the teaching plan will be described. This is a continuous process which includes modeling, construction analysis, interdisciplinary collaboration, standardization, control, production and assemblage. Next, the general frame of the teaching environment will be outlined. This involves Collective Innovation labs (CI labs), the combination of craft workshops and innovation and creative technology spaces. The presentation involves a holistic proposal of continuum design-construction teaching methodology that includes the ideological, methodological and spatial framework.
A Case Study Of Using BIM And COBie For Facility ManagementJim Jimenez
This document discusses a case study of using Building Information Modeling (BIM) and Construction Operations Building Information Exchange (COBie) for facility management on three projects. It was found that while the database generated was useful for preventive maintenance, the data gathering process needed to start earlier in the project. For BIM to be more effective for facility management functions like space allocation and building automation, the BIM and COBie processes should have been initiated during early design and construction phases. The findings from this study can be used as preliminary research to further investigate and analyze the implementation of BIM and COBie in facility management.
A Research Agenda For Highly Effective Human-Computer InteractionMonica Waters
This document outlines a proposed research agenda to improve human-computer interaction (HCI). It identifies three key areas of focus: useful interaction, usable interaction, and universal interaction. For each area, it discusses challenges and proposes research to address them. The overarching goal is to make technology more useful, usable, and accessible to all users through improved design, evaluation methods, predictive models, and support for diverse abilities and contexts of use. The proposed agenda calls for substantial increases in HCI research funding across scientific, design, and engineering disciplines.
International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
A Survey of Building Robust Business Models in Pervasive ComputingOsama M. Khaled
Pervasive computing is one of the most challenging and difficult computing domains nowadays. It includes many architectural challenges like context awareness, adaptability, mobility, availability, and scalability. There are currently few approaches which provide methodologies to build suitable architectural models that are more suited to the nature of the pervasive domain. This area still needs a lot of enhancements in order to let the software business analyst (BA) cognitively handle pervasive applications by using suitable tasks and tools. Accordingly, any proposed research topic that would attempt to define a development methodology can greatly help BAs in modeling pervasive applications with high efficiency. In this survey paper we address some of the most significant and current software engineering practices that are proving to be most effective in building pervasive systems.
For citation:
Osama M. Khaled and Hoda M. Hosny. A Survey of Building Robust Business Models in Pervasive Computing. An accepted paper in the 2014 World Congress in Computer Science Computer Engineering and Applied Computing
Towards an integrated set of design tools based on a common data format for b...Ken Hew, Ph.D., CISA
This document discusses developing an integrated set of design tools based on a common data format to facilitate sharing of building and services design information. It aims to improve the traditionally fragmented design process by enabling interactive sharing of multi-disciplinary design data from early stages. The proposed approach represents the design process and needed information as 3D digital models that can interface with analysis software, allowing thermal data to inform architectural design decisions earlier. Preliminary research observed limitations of existing discrete tools that do not effectively coordinate or exchange data between disciplines during design.
A HEALTH RESEARCH COLLABORATION CLOUD ARCHITECTUREijccsa
Cloud computing platforms used for research collaborations within public health domains are limited in terms of how service components are organized and provisioned. This challenge is intensified by platform level challenges of transparency, confidentiality, privacy and trust. Addressing these collaboration issues will necessitate that components are reorganized. There is a need for secure and efficient approaches of reorganizing the service components, with trust to support collaboration related requirements. Through iterative design, a reliable and trust-aware re-organization of cloud components – the Collaboration cloud architecture is achieved. We utilize SOA, Privacy-By-Design principles and insights from blockchain to enforce trust. We illustrate its potential with multi-layer security process flow based on server-to-client tokens, Role-based Access Control and the traditional authentication – username and password with assurance for privacy and trust. The architecture shows promise towards data governance and the overall management of internal or external data flows.
The document discusses how the internet is important for architects and their clients for communication, coordination, and graphic representation. It describes how architects currently use the internet for marketing, presentations, training, and project management. It also discusses future trends like using building information modeling, data exchange standards, and new project delivery methods to improve collaboration and information sharing across organizations.
A HEALTH RESEARCH COLLABORATION CLOUD ARCHITECTUREijccsa
Cloud computing platforms used for research collaborations within public health domains are limited in terms of how service components are organized and provisioned. This challenge is intensified by platform level challenges of transparency, confidentiality, privacy and trust. Addressing these collaboration issues will necessitate that components are reorganized. There is a need for secure and efficient approaches of reorganizing the service components, with trust to support collaboration related requirements. Through
iterative design, a reliable and trust-aware re-organization of cloud components – the Collaboration cloud architecture is achieved. We utilize SOA, Privacy-By-Design principles and insights from blockchain to
enforce trust. We illustrate its potential with multi-layer security process flow based on server-to-client tokens, Role-based Access Control and the traditional authentication – username and password with assurance for privacy and trust. The architecture shows promise towards data governance and the overall management of internal or external data flows.
Advanced infrastructure for pan european collaborative engineering - E-collegXavier Warzee
This article presents challenges, visions, and solutions for a true Pan-
European collaborative engineering infrastructure that is a target of the IST project
E-COLLEG. The consortium aims at the definition of a transparent infrastructure
that will enable engineers from various domains to collaborate during the design of
complex heterogeneous systems.
Application of ict benefits for building project management using ism modeleSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
The Building Information Model track is planned for EVM World this spring. In the last edition of The Measureable News we had a bibliography of BIM papers. Here are some more.
This document outlines Robina Hetherington's PhD research which investigates the interoperability of software used for building design, energy analysis, and visualization. The research will involve a case study modeling a small house in Revit and analyzing it in Ecotect. This will allow analysis of how data is exchanged between programs using file formats like ifcXML and gbXML. The goal is to better understand challenges of data movement and determine how software can better support designing low-carbon buildings. Future work may explore how open platforms could promote innovation in building design software to meet climate change needs.
The IT-GRC platform is a solution that is based on
the paradigm of distributed systems, based on multi-agent systems
(MAS) in its different parts namely the user interface, the static
and dynamic configuration of the organization management
profiles, the choice of the best repository and the processing of
processes, it takes advantage of the autonomy and learning aspect
of ADMs as well as their high-level communication and
coordination. However, these technological components are
difficult to manipulate, or users lack the necessary skills to use
them correctly. In this situation, the modeling of a communication
architecture is necessary, in order to adapt the functionalities of
the platform to the needs of the users. To help achieve these goals,
it is necessary to develop a functional and intelligent
communication architecture, adaptable and able to provide a
support framework, allowing access to system functionalities
regardless of physical and time constraints.
Propagating Engineering Changes To Manufacturing Process Planning Does Plm M...Mohamed Ali El Hani
This document summarizes a research study on supporting the propagation of engineering changes to manufacturing process planning through product lifecycle management (PLM) tools. The study involved a case study of a manufacturing company's process planning department. It describes how the manufacturing work instruction (MWI) development process is complex and relies heavily on process planners' expertise. An IDEF0 activity model of the MWI development process was developed containing 201 activities. The study found that a significant portion (35%) of informational objects used in the process are not contained within current PLM software. To better support change impact analysis, the researchers propose a dashboard solution to provide process planners a centralized view of all ongoing and upcoming tasks across different actors involved in
The SMUDIE project aimed to analyze and improve the student information management systems at Swansea Metropolitan University. It conducted interviews, created "as is" models using Enterprise Architecture, and identified opportunities for improvement. The project developed a new "to be" modeling technique combining Enterprise Architecture, Viable Systems Modeling, and Soft Systems Modeling to inform future integrated information system design following the university's merger. Key outcomes included better stakeholder understanding, a system design model, and lessons about using modeling techniques for management planning.
This document discusses project risk management and describes several challenges with current computer programs and methods for project risk management. It notes that most current methods favor one-time identification, evaluation and analysis of risks rather than ongoing risk management throughout the project. The document also provides details about different types of computer programs for project risk management, including those focused on risk analysis and those that support risk management processes.
A Bibliometric Review of the Evolution of Building Information Modeling (BIM)...Khaled gharib
Building Information Modeling (BIM) is a powerful tool that
allows architects, engineers, and construction professionals to
create detailed 3D models of buildings, which contain a wealth
data about the physical characteristics and attributes of the
project, one of the key benefits that it allows stakeholders to
visualize the project in great detail, which can help identify
potential problems or inefficiencies before construction even
begins. However, BIM data is static and does not reflect
changes or updates that occur after construction is complete.
As the construction industry continues to modernize, Building
Information Modeling (BIM) has become a staple in the design
and construction phases of a project. The widespread adoption
of Building Information Modeling (BIM) and the recent
emergence of Internet of Things (IoT) applications offer several
new insights and decision-making capabilities throughout the
life cycle of the built environment. In recent years, the ability of
real-time connectivity to online sensors deployed in an
environment has led to the emergence of the concept of the
Digital Twin of the built environment. This is where the concept
of the digital twin has emerged to revolutionize the way
buildings are managed and operated throughout their entire
lifecycle. A digital twin is a virtual replica of a physical asset or
system that incorporates real-time data from sensors and other
sources, by connecting BIM models to IoT sensors and other
data sources, it is possible to create a dynamic digital twin that
can provide real-time insights into the performance and
condition of a building. Overall, the integration of BIM and IoT
into digital twins offers a powerful tool for designers, engineers,
and building managers to optimize the performance and
efficiency of buildings. This paper conduct a bibliometric review
over the evolution of BIM to DT, examining the benefits of each
technology and how Digital Twin expand on the capabilities of
BIM. The paper also will discuss Digital Twin and BIM in the
industry, discussing real-world applications and the tangible
benefits that organizations have experienced. Ultimately, this
paper highlights the importance of embracing new
technologies like Digital Twins to achieve optimal efficiency and
cost savings in the building industry
Similar to Integrated Information System for Construction Operations (20)
The document discusses calculating reactions to loads applied to beams. It begins by defining key terms like beams, loads, forces, and equilibrium. It explains that reactions must be calculated to balance applied loads and achieve static equilibrium. The document then provides examples of calculating reactions on simple beams using free body diagrams and the principles of moment and force equilibrium. Reactions are found by taking moments and forces around supports and setting equations equal to zero.
The document outlines the construction tender process between clients, contractors, and subcontractors. It discusses the various stages a contractor goes through when submitting a tender, including reviewing project details, conducting site surveys, developing cost estimates and bills of quantities, considering available resources and equipment, and ultimately submitting a bid package. The tender process depends on the type of tender (open or selective) and involves the contractor strategically planning and scrutinizing all available tender documents.
This document provides an overview of risk management concepts and techniques for construction projects. It defines risk and risk management, and explains the risk management process which includes risk identification, analysis, evaluation, and response. It discusses different types of risks in construction such as physical, financial, political, environmental, design, and construction-related risks. Methods for treating risks through elimination, transfer, reduction, and retention are also covered. The document emphasizes that risk assessment is important for construction safety and outlines the risk assessment process.
This document discusses quality management and the process of managing quality. It defines quality, outlines the importance of quality management, and describes various quality systems and standards like ISO 9000 and Total Quality Management (TQM). It discusses key concepts such as quality planning, quality control, quality assurance, quality audits, and continuous improvement. The document is intended to provide an overview and introduction to quality management for students in a university course.
This document outlines the typical stages and gates of a project management life cycle using PRINCE2 and APM methodology. It includes 6 stages: 1) Conception, 2) Definition, 3) Contract Negotiation, 4) Start-Up, 5) Project Implementation, and 6) Project Closure/Post. Each stage involves key activities like developing a proposal, securing funding, mobilizing resources, implementing the work program, and reviewing lessons learned. There are also 5 gates or decision points to review the project: 1) Bid/No Bid, 2) Tender Approval, 3) Investment Decision, 4) Testing Commission, and 5) Benefits Realization.
This document provides an introduction to network analysis and critical path methods for construction project management. It discusses key concepts like activity-on-arrow networks, precedence relationships, dummy activities and time analysis. Time analysis involves performing forward and backward passes on a network to determine the earliest and latest start/finish times for activities, and the critical path which identifies the shortest time to complete the project. Network analysis techniques allow project managers to systematically plan, schedule and control projects through graphical representation of the logical relationships and duration of tasks.
Business Development Prequalification Document is a 3 page document outlining the requirements and process for prequalifying vendors for potential business opportunities. It requests company information including years in business, number of employees, client references, and financial statements. Vendors must complete and return the document by a specified date to be considered for future projects.
This document is the quality manual for Al-Muwakaba Wooden Furniture & Industrial Engineering Factory Ltd. It outlines the company's quality management system which is designed to comply with ISO 9001:2008 standards. The manual defines terms, lists responsible parties and their roles, and provides details on the company's quality policies, procedures, and documentation requirements. It aims to ensure all products and services meet customer needs and expectations.
The document provides criteria and recommendations for airports to achieve "world-class" status. It outlines features such as geographic location along major air routes with no political or environmental constraints. It also details requirements for airspace and air traffic control with no restrictions. Additionally, it recommends infrastructure like runways capable of high traffic volumes, reliable transportation links, and facilities to handle peaks in traffic. Finally, the document lists standards for passenger terminals, cargo facilities, and charges to allow airlines to meet service standards at reasonable costs.
The document provides guidance on project management procedures. It was written by Dr. Andrew Kimmance, who has over 30 years of experience in civil engineering and construction project management. The guidance covers the typical project life cycle, which begins with an initiation phase involving defining the project objectives and scope, appointing a project team, and gaining approval to begin detailed planning. It emphasizes the importance of the initiation phase in setting up the project for success. The document then provides tips and templates for properly initiating projects and taking them through the project life cycle.
This document provides a project work plan for design and engineering services for the King Abdul Aziz International Airport development project in Jeddah, Saudi Arabia. It outlines the project scope, milestones, team roles and responsibilities, risk management strategy, communication plan, change management process, and quality assurance/control program. The project aims to deliver the highest quality design for airport construction through improved management, organization, planning, customer service, and consistency in product and process.
The document provides a business and sales plan for a new Eastern and Central Division office in Riyadh, Saudi Arabia for Woodroc, a wooden furniture manufacturing company. The division aims to generate additional sales, develop new markets and products. Key objectives include doubling year 1 revenues by year 2 and achieving 50% of sales from government customers and 30% from high-end residential customers in year 1. The plan outlines market analysis, strategies, sales forecasts, management structure and financial projections to guide the new office in achieving its objectives over three years.
This document provides guidance on project management procedures. It was written by Dr. Andrew Kimmance, who has over 30 years of experience in civil engineering, construction, and project management. The document outlines the typical phases of a project life cycle, including initiation, planning, execution, and closure. It provides tips and templates to help project managers successfully initiate projects, develop plans, manage risks, and deliver projects on time and on budget. The goal is to give practical advice to help organizations of any size effectively manage their projects.
The document outlines the requirements for establishing a new business development process at Woodroc Manufacturing. It discusses establishing an organizational structure with clear roles and responsibilities, developing a strategy that focuses on target markets and customers, and implementing processes for marketing, sales, and quality control. An effective business development system requires thorough planning, monitoring, and addressing requirements across key areas like production, human resources, and information technology.
More from Dr Andrew Kimmance PhD, MSc, BSc, MAPM, CIOB, AHEA (15)
Integrated Information System for Construction Operations
1. IMDS International Technical Journals Integrated Database Management & Information System
An Integrated Product and Process Information Management System
(HIPPY) for the Civil’s and Construction Industry
Dr A. G. Kimmance 1
and Prof C. J. Anumba2
1
Consultant, Industry Royal Charted Member, ALS-Partner Director & PM Specialist, dragkimmance@yahoo.co.uk
2
Department of Civil & Building Engineering, Loughborough University, Loughborough, Leicester, LE11 3TU, UK
The Authors
1
Dr Andrew Kimmance (PhD; Msc-Eng, B-Eng, MCIOB, MAPM, AHEA, C-Eng) is a consultant in Civil
Engineering, Construction and Project Management, a Charted Engineer, Member of the Charted Institute of
Building (MCIOB), Association of Project Management (MAPM) and Associated Higher Education Academy
(AHEA). He has a HND in Civil Engineering, BSc-Eng (Honours) in Construction Engineering with Project
Management, MSc-Eng in Industrial Manufacturing Engineering with Process Management, and a PhD in Civil
and Building Engineering with Project Management at Loughborough University where he was formerly
construction director in the Civil and Building Engineering Department, researching information modelling systems
to support integrated construction and project management processes, and part time lecturing. Previously he has 25
years’ experience in Civil/Construction Engineering and Project Management with International organisations;
incorporating a wide range of consultancy, coupled with extensive operational expertise in Civil’s & Infrastructure,
Project Management and Business Development. His research interests include, integrated project management
concepts, construction information systems, BIM applications and classification of product and process modelling
for improving collaborative team workings, communications, and team performance in the construction industry,
and have been accredited with numerous scientific publications for leading International journals in these fields.
2
Professor Chimay Anumba is a Chartered Civil/Structural Engineer. He holds the Chair in Construction
Engineering and Informatics and is Founding Director of the Centre for Innovative Construction Engineering
(CICE) at Loughborough University. His research interests are in the fields of computer-aided engineering,
concurrent engineering, intelligent engineering systems, collaborative communications, and advanced construction
informatics. He has over 150 scientific publications in these fields. Professor Anumba's research work has received
support with a total value of over £15m from industry, the Engineering and Physical Sciences Research Council
(EPSRC), and several UK and international funding bodies. He is actively involved in several professional bodies,
and is a member of the governing council of the Institution of Civil Engineers (ICE). Professor Anumba also
undertakes advisory and consultancy work for UK Government and construction-sector firms and has recently spent
time at the Massachusetts Institute of Technology (MIT) and Stanford University, USA as a visiting Professor.
KEYWORDS
BIM classification, concurrent engineering, construction integration, construction operations, integrated database
management system, on-site management, training and learning frameworks, building delivery process,
process and product management, information modelling, object-oriented, hyper-linking and embedding.
ABSTRACT
Classification is a means for facilitating collaboration, communication and the performance amongst parties in
construction practises. The distribution of information through collaborative working in construction projects is
becoming increasingly important and central to contractors team performance, especially as many activities are
3 April 2008 Prepared by Dr A G Kimmance1
2. IMDS International Technical Journals Integrated Database Management & Information System
typically performed involving parties based in different geographical locations. Recent years have seen the
emergence and development of a plethora of visual software modelling tools, modelling standards, classification
methods for wide enterprise concurrent engineering (CE), and agile techniques for exchanging and sharing
construction information between software applications. While the concept of an integrated product and process
information modelling system that offers the potential for improved project performance, communications and
collaborative team working is gaining an increasing popularity and acceptance, for decades the construction industry
has adopted a modus operandi, without taking much advantage of the opportunities offered by current integrated
information systems; communications, reporting, and software database development technologies.
This paper addresses the means of integrating large amounts of construction data, storing, communicating,
classifying, and reporting the information by discussing the practical implementation of a prototype database system
for coordinating and managing the processing of both product and process information during the construction
stages of a project, using a high level construction facility as an example. It describes an integrated product and
process information modelling database system (HIPPY) developed to manage the communication of information
essential to construction project managers. It offers an overall description of the scope, requirements and objectives
of the system, which is in the context of construction building infrastructure, and influenced by resource constraints
and the principles of database prototyping. The integrated conceptual model is based on key information and
functional requirements, and has been developed to model the integration of both product and process information in
a hierarchical manner. The prototype system shows how the model relates to construction practices, and presents the
benefits that are gained from structuring information using this innovative lean approach. A brief description of the
potential practical application of the integrated prototype system is also presented.
1. INTRODUCTION
The structure of a facility (building) evolves over a project’s life cycle through several stages from requirements,
planning, design and construction, to operation, maintenance and demolition, and many tasks during the life cycle,
typically require the collaboration of a multi-disciplinary team. The parties involved during these stages, largely
relating to information management during design and construction, include a variety of participants such as clients,
construction project managers, architects, contractors, consultants, specialists, suppliers, and venders all exchanging
large quantities of complex information at different times and locations, and each having responsibilities for certain
aspects of the project. The type of information and extent of detail would clearly be related to the project and the
parties involved but would typically include the management of scope, time, cost, quality, health and safety,
environmental impact, communications and the exchange of information (i.e. administrative, procurement, technical,
graphical, financial or legal information, and the systems and procedures they give rise to). Ideally, the information
management approach used during the design and construction stages would eliminate re-entering data, encourage
design and construction integration, enable the systematic collection of paper based and electronic information, and
provide the construction manager with the information structure necessary to successfully deliver a building project.
However, what is happening in the construction industry as a whole is also happening on the construction
sites. In general, the majority of operations and tasks contain the basic work processes and are supported by
information technologies, but most systems are far from being fully integrated. Different professions also use their
own unique processes to carry out these operations and tasks, but often have to rely on information supplied by
others. Communication therefore is largely conducted by traditional means, mainly formalised on paper, although
3 April 2008 Prepared by Dr A G Kimmance2
3. IMDS International Technical Journals Integrated Database Management & Information System
the use of electronic methods (such as e-mail, mobiles, computer CD-ROMs and the internet) is considerably
growing (Kimmance, et al. 2002). Different computer applications support construction management tasks at each
stage of the process. However, a coherent and integrated information modelling system is needed to better classify
and transfer construction product and process information between the design and construction stages, and between
members of the construction team. Many product and process models, propose to integrate construction information,
provide guidelines to represent information flows that form the basis for implementing computer systems
(Kimmance, 2000c). Researchers are working on information exchange, classification, and representation standards,
so that construction information can be integrated and freely exchanged by different computer information systems
(Kimmance, 2000b).
Recent research work in this area has focused on enabling business process flexibility and workflow
integration to improve competitive advantage (Sommer, 2003; Lau et al. 2003). Here, many organisations are
implementing business process management solutions that are enabled by enterprise resource planning (ERP)
systems, customer relationship management (CRM) and building information models (BIM) with mixed results
(CRC, 2007; Chin-Fu Ho et al. 2005; Sommer, 2003; Nikolopoulos, 2003). However, faced with the financial and
technical barriers of using traditional information exchange techniques such as EDI (Jun & Cai, 2003) and the
process integrations problems when augmenting ERP systems with customer and supplier extensions, many
organisations in the industrial manufacturing and production sectors are adopting flexible e-business solutions based
on integrated web technologies (Sommer, 2003).
1.2 Problems with the Construction Industry
The fragmented nature of the construction industry is well known, with a typical project involving up to eight or
more different professional disciplines. This has led to numerous problems including inter alia: an adversarial
culture; the fragmentation of design and construction information with data generated at one stage not being
automatically available for re-use downstream; and the lack of real life cycle analysis of projects (Anumba &
Evbuomwan, 1997, Kimmance 1998). It is now recognised that the adoption of new business processes based on
concurrent engineering (CE) principles will provide a means of overcoming these problems, and improve the
competitiveness of the construction industry (Kimmance, 2000a). Amongst other things, this requires the
development of integrated product and process information systems that offer the potential for improved
collaborative working, with all members of the project team collaboratively at the early stages of a project to resolve
key ‘downstream’ issues, with shared ownership of design rationale and decision making (Anumba, et al. 1998).
Previous studies have focused on modelling either the product or the process, without adequate consideration
of the implications of one on the other (Kimmance, et al. 2003). Indeed many research projects (some based on
European initiatives) have been devoted to the description of the product to be designed or achieved with the aim of
providing an ‘automated way’ of archiving and exchanging data (Dubois, et al. 1995). However, this description has
proved inadequate since, although enabling a good implementation of software tools, it neither provides
transparency and visibility of the roles of the actors involved in the construction process nor improves information
exchange. Furthermore, the modelling of processes necessary to generate a clear understanding of the product is
largely ignored (Kimmance, et al. 2004). Consequently, what is needed is a system that is capable of detailing the
building delivery process (BDP) by way of integrating product and process information, visualising modelling data,
editing, updating, and providing links to other various heterogeneous information sources within the AEC industry.
3 April 2008 Prepared by Dr A G Kimmance3
4. IMDS International Technical Journals Integrated Database Management & Information System
This paper describes a prototype database management system for the integration of product and process
information in construction projects. While we recognise that this concept is not entirely new, we see its application
in the construction sector as a way forward, and as an innovative agile development. Yet, prior to developing a
database system it is important to reflect the information that is required, as a framework for design and construction
in order to facilitate and demonstrate the implementation of product and process information, which is applicable to
the management of information during the on site construction stages, with house building as the focus point.
2. CONCEPTIONAL DESCRIPTION OF THE BUILDING DELIVERY PROCESS
2.1 Definitions and Terminology
One of the most critical questions confronted by a project sites manager is “what construction method should be
used?” The number and type of methodologies available for construction processes are diverse, with new techniques
continuously being developed for use in the construction sector which contribute to an ever-expanding variety of
construction methods (Kimmance, 1997, 2000b). Many of these methods did not exist 25 years ago, with the post-
war era seeing the development of numerous ‘modus operandi’ for representing construction process information,
all of which are changing the way in which facilities such as buildings, roads, and bridges are being constructed.
With the development of these new methods, and the adoption of new and advanced information technologies has
led to a better attentiveness on improved methods for analysis and design of the construction process. With this in
mind, it is sensible to agree that if several building experts are asked to define exactly what a construction process is;
they would probably convey twenty different answers. Thus, it is logical to say that the building delivery process
(BDP) can be viewed from different perspectives and can include many different construction elements. Therefore,
before undertaking a discussion, there must be a clear mutual understanding of what is meant by the ‘building
delivery process’; here, the on site construction processes for building a facility.
In the building industry a construction process is often defined as a sequence of activities performed using
different resources (both material and human) on construction entities or objects. Whereas, the BDP can be viewed
as a combination of conversion activities, where inputs are transformed into outputs (value-adding activities) and
flow activities (the non value-adding activities such as moving, waiting, inspecting, cleaning, etc.). In this context, a
process is often associated with terms such as activity, operation, task, event, cost, duration, etc. Therefore, clear
definitions of these terms need to be established. This paper has adopted the preposition that any methodology for
the consideration of operations and processes of construction must consider the hierarchical nature of construction,
with six levels of hierarchy definable in construction management. These include:
1. Task Level: The task level is concerned with the identification and work assignment of elemental segment of
work (i.e. work task) to resources (agents, equipment, plant, etc.), which can be defined further as:
• A work task is the basic description unit in construction practice, and is the fundamental building blocks of
processes and operations. Whereas, a work assignment is the collection of work tasks specifically assigned
to resources for performance. These usually involve sequences of work tasks appropriate to a specific trade
or resource skill level and, therefore may define a construction process.
2. Process Level: Is a unique collection of work tasks and assignments related to each other through a well-
defined structure and sequence that represent an identifiable segment of a construction operation?
3 April 2008 Prepared by Dr A G Kimmance4
5. IMDS International Technical Journals Integrated Database Management & Information System
3. Activity Level: An activity is a time and resource-consuming element of a project normally defined for the
purpose of time and cost control by a project planner or scheduler, estimator or cost engineer, and is directly
related to a definable part of a product. An activity is the aggregation of operations or processes for the purpose
of scheduling and costing, and therefore only has implicit information relating to how construction is performed.
4. Operation Level: The operation level is concerned with the technology and details of how construction work is
performed. The construction operation results in the placement of a definable part of a product (i.e. closely
related to the means of achieving an end product) and is a synthesis of construction processes.
5. Project level: the project level is dominated by terms relating to the project breakdown for the purpose of time
and cost control (e.g. the project activity and the project cost account). The concept of resources is defined and
related to the activity as either an added descriptive attribute of the activity or for resource scheduling purposes.
6. Organisation Level: This is concerned with the legal and business structure of a company, the various
functional areas of management, and the interaction between departments and personnel performing these
management functions.
A breakdown of the typical classifications in the process at each level of hierarchy is presented in table 1. At the
organisation and project levels, activities within the schedule related to the construction works of the sub and
superstructures of a detached house unit. At the work task level, location, unloading and loading, selecting and
laying, and other resource related activities are required. The distinction between an activity and an operation is
firmly tied to the duration of the function and whether it is primarily concerned with a physical segment unique to
the time and cost control of the projects (activity) or to the technological process or method required to achieve a
specific end product (operation); in this case, a house facility. The operation is therefore more fundamental for an
understanding of on site (field) building methods.
Table 1: Project example showing the hierarchical breakdown of terms in construction management
Hierarchical
Level
DESCRIPTION AND BASIC FOCUS
Organisation
Company Structure, Project Focus and Site Functions:
Project #1: Detached house with masonry walls and pitched roof tiles.
Project
Project Plans & Definition: Construction of Substructure works, Superstructure,
Services, and Interior Fixings and Furnishings.
Activity
Time and Cost Control: Concrete to foundations, £1,000, 2 days, 4 labourers &
concrete to ground floor slab, £1,500, 3 days, 4 labourers.
Operation
Construction method: External brick envelope to include the installation of 8
UPVC window frame systems, bricklaying operation using scaffolding and labour.
Process
Trade Actions: Brick delivery process by labourers and forklift; erect, move and
adjust independent scaffold unit; lay brick process by bricklayers.
Task (work)
Skill and Labour Level: Locate and load out spot boards with cement mortar; load
scaffold with bricks; select, cut and lay bricks.
2.2 Factors Affecting the Productivity in the Building Delivery Process (BDP)
Throughout the globe, many countries construction and/or building activities in one form or other, account for at
least half their annual expenditure on capital goods (Kimmance, 1999). Therefore, increases in productivity
throughout the construction sector will not only raise the earnings and profits of those working in this sector, but
would also contribute to an improvement of productivity in other sectors. If this is to be achieved, a combination of
3 April 2008 Prepared by Dr A G Kimmance5
6. IMDS International Technical Journals Integrated Database Management & Information System
resources such as; information technology (IT), land, buildings, materials, mechanical plant, tools, equipment and
manpower will need to be used efficiently, and it is the duty of construction management to combine these
resources, illustrated in Figure 1, to enable the delivery of a building to be executed expeditiously and economically.
Realisation of the building delivery process involves the relationships and joint-efforts from various different parties
with there being an abundance of alternatives to organise the tasks and activities needed. However, experience has
shown that there is always scope for improvement in building facilities.
Figure 1: Tasks of the construction manager
Figure 2 illustrate the difference between actual time and productive time for a typical building project. The basic
work content is the absolute minimum time in which a house or building operation can theoretically be completed
(Kimmance, A. G., 2002). In practice this is hardly ever achieved, due to the following factors:
Non-Added Value Activities: Includes repetitive work due to poor workmanship, repeated work inspections, delays
in the delivery of materials, insufficient amount of materials, defects in materials, poor design and specifications,
poor site management and supervision, and inefficient methods of construction. However, due to the nature of the
building delivery process, the proportion of non value-adding activities in projects has not fully been established; yet
it is believed to be significant. As a result, non value-adding activities need to be reduced and kept to a minimum, if
time reductions and cost savings are to be achieved, while maintaining the highest work quality standards.
Unproductive Time: Occurs when workers, equipment and machinery are standing idle. Unproductive time may be
due to extraneous reasons beyond the control of site management, or as a result of the shortcomings of site
management or labour. Unproductive time factors may include poor weather conditions, poor interfaces and
coordination between building trades or sub-contractors. Some of these are beyond the control of site management;
anticipation through risk assessment and efficient management and work scheduling can often lessen their effects.
3 April 2008 Prepared by Dr A G Kimmance6
Land &
Buildings
Labour
Manpower
Tools
Equipment &
Plant
Materials
Completed
Building
Construction Management
Plans,
Directs,
Co-ordinates,
Motivates,
Controls,
Supervises,
Monitors
IT/IS
TO THE PRODUCT
7. IMDS International Technical Journals Integrated Database Management & Information System
Poor Management: The main factors associated with poor management include the following:
• delays in obtaining necessary information such as working drawings, specifications, plans, etc.;
• delays in the delivery of materials, plant and equipment, as a result of poor planning;
• inadequate planning of work sequences, resulting in workers and machinery to stand idle;
• poor supervision and poor health and safety management; and,
• Poor management of workforce.
Shortcomings of Workforce: The main factors associated with the shortcomings of labour include the following:
• poor attendance (e.g. taking time off without good cause, failing to start work promptly (lateness), idleness or
deliberate slowdown;
• poor workmanship, resulting in rework;
• failure to observe safe working methods causing accidents; and,
• Poor maintenance of building tools, equipment, plant, etc.
Figure 2: Work content for a typical building project
These issues are by no means exhaustive and to a certain extent used here to identify some of the shortcomings
associated with construction activities within the building delivery process.
Generally however, problems are usually related to inadequate site control and poor management rather
than the shortcomings of the workforce. To reduce both the total work content and effective time, the main task of
3 April 2008 Prepared by Dr A G Kimmance7
Basic work content of
the project or
operation that it
would take if the
designs, drawings and
specifications were
perfect, and if
methods and plant
were ideally suited to
the task, and if
delivery time was
accounted for. In
addition, little or no
working time was lost
due to any cause
whatsoever
Time lost due to
shortcomings of
the workforce
Work added by
defect in
design and
specifications Time lost due
to unforeseen
circumstances
Time lost due to
shortcomings of
management
Work added by
poor building
processes
BASIC WORK CONTENT NON-ADDED VALUE ACTIVITES UNPRODUCTIVE LOSS OF TIME
TOTAL ACTUAL TIME
TOTAL PRODUCTIVE TIME
8. IMDS International Technical Journals Integrated Database Management & Information System
site management is to organise and control all available resources in order to achieve maximum efficiency and
productivity, that is, reduce the actual construction time in order to minimise unproductive time. The use of
integrated information systems capable of managing information essential to the building delivery process offers
significant potential for enabling the construction industry to achieve its current and future challenges.
2.3 Information Scope for Building Facilities
As earlier mentioned, the lifecycle of a building evolves through planning, design, construction, operation,
maintenance and demolition, and requires the expertise of many participants using a variety of resources. The
stakeholders involved during this cycle, particularly with regards to design and construction, would typically include
a variety of individuals such as clients, contractors, specialists, suppliers, and construction managers, all exchanging
large quantities of complex information at different times and locations. The type of information and extent of detail
would clearly be related to the project and the parties involved, but would typically include information related to:
resources, time, cost, quality, health and safety, environment and administrative, technical, financial and legal
information, and the systems and procedures that they give rise to). Figure 3 presents a multidimensional entity
model, representing the scope of information needed to construct a house building. The model consists of four axes,
namely, the product, process, actor and resource axes, and is used here to illustrate and identify the research domain.
3 April 2008 Prepared by Dr A G Kimmance8
A1 Organise Site Resource Process
Enabling process
Acquire resources
Allocate resources
A2 Site Preparation Process
Clear site area
Groundwork excavation
Removal of soils
Control Specs
A3 Construct Substructure
Foundations
Footings
Slab, etc
A4 Construct Superstructure
Walls
Floor
Roof
A5 Inspect Works
Environmental Regs
Approve works
Hand over
PHYSICAL RESOURCES
Equipment
Tools
Materials
Human Resources
Management
Specialists
Tradesmen
Labour
Workspace
Building Areas
Walls, Roof, etc
INFORMATION RESOURCES
Design, Planning Controls
Specs, Regs, etc
Financial Resources
Time Resources
PRODUCTAXIS
STRUCTURE(SUB)
Foundation
Footing
Slab,etc
STRUCTURE(SUPER)
Walls
Floors
Roof
Windows,etc
Services
Water
Electric
Gas
Phone,etc
Interior
Ceilings
Plaster
Furnishings
Paint
Client’sRepresentative
Architect
SITEMANAGER
QuantitySurveyor
Engineers
CONTRACTORS
Planner(CDM)
SUB-CONTRACTORS
PlantOperators
Labourers
Suppliers
Users
PROCESS AXIS
RESOURCE AXIS
ACTORAXIS
Building
Construction
Phase
RESOURCES AXIS
9. IMDS International Technical Journals Integrated Database Management & Information System
Figure 3: View of structural entities required to construct a house building
2.3.1 Product Axis
This axis describes the physical system, including subsystems, and components, which constitute the house building.
A house unit consists of several major systems, such as Sub-structure (foundation, footing, slab), Superstructure
(wall, floor, roof, windows, etc.), Services (water, gas, electric, etc.), and Interior fixture and fittings, furnishing, etc.
These systems can be further decomposed in smaller subsystems, components etc., all the way down to the material
elements such as bricks and blocks, concrete, reinforcement bars, and steel members, timber trusses or joists, doors
and windows, etc. The work presented in this paper concentrates on the substructure and superstructure systems
(highlighted in Figure 3) of a house building. The function of these systems is to protect the end users (house
owners) from fluctuating outdoor weather conditions, in addition to providing accommodation; shelter and security
(i.e. place of safety from adverse or unseen conveniences).
2.3.2 The Process Axis
The traditional construction process is divided into many stages. The process axis represents the various stages of
construction. Each stage, represented by activities and/or functions can be decomposed in more detail to show the
operational processes involved in constructing the house building. These stages can be grouped into three major
phases: the decision phase, the design phase and the construction phase. Once a building is completed it goes
through an operational phase and possibly several renovations. The life of the building ends when it is demolished.
The work presented in this paper focuses on the on-site construction phase, with house building as a test bed. One of
the aims of the on-site construction phase is to identify and analyse the relevant process information (activities,
operations, tasks, etc.) needed to construct the house building. Table 2 presents a typical procedure of the building
activities (rough sequence of operations) needed to construct both the substructure and superstructure of a house
unit.
2.3.3 Actor Axis
This axis lists the main participants involved, directly or indirectly, throughout the building construction phase. An
actor represents anyone who interfaces with a system, and is always external to the system being modelled. An
actor’s roles may be performed by one person for small projects, or by several people on larger projects. Actors
involved in the building construction phase generally include the construction management team such as: client’s
representative, design team, project/site manager, engineers (planning, structural, electrical, etc.); contractors and
sub-contractors (building, plant, etc.); specialist contractors, labourers, and building controllers. A list of the main
actors involved in the construction of the sub/superstructure systems can be found in Table 3. It is also acknowledge
that in larger projects other disciplines would usually be involved at the building construction phase, such as
consultants, environmental engineers, geologists, etc.
2.3.4 Resources Axis
This axis and possibly the most important, lists the resources used for a particular activity by associating the activity
with the objects throughout the building construction phase. The resources axis is also closely linked to the actors
involved within the construction process, given that actors are generally regarded as human resources. The rationale
for separating actors from the resources axis is associated with the building product model, discussed later in this
3 April 2008 Prepared by Dr A G Kimmance9
10. IMDS International Technical Journals Integrated Database Management & Information System
paper. The resources have been divided into groups to represent the physical or information elements (classes)
designed in the building product and process models. Classes of resources include financial, time, human resource,
architect, engineers, etc., physical (materials, plant, equipment, tools etc.), workspace (area, volume, etc.), and
information resources (standards, regulations, building documents, etc.). Some elemental resources can be further
defined at lower levels such as a particular component or composite elements (e.g. concrete or bricks, doors,
windows, JCB, concrete mixer, etc.). However, this will depend on the classification and type of relationship
between element types. Not every process will require resources from every category. The critical attributes defined
for resources might include type, availability, supply, function, quality, and cost.
Table 2: General Sub/Superstructure Building Activity Sequence for House-building
The combination of products, processes, resources and actors provides a consistent representation of the building
delivery process. One of the main aims of an integrated product and process model is to automate and combine
several tasks during the overall construction process, and to provide support to designers, construction managers,
and contractors in an integrated fashion. The use of standardised computer data representation that integrates
product and process information would greatly improve the communication of design, planning and building
3 April 2008 Prepared by Dr A G Kimmance
Task ID Activity/Operation Description
1. Demolition of existing structures
2. Clear whole site area
3. Set up building cabins and lock-ups
4. Excavation of building area
5. Removal of excavated material
6. Levels and pegging to foundation
7. Delivery of/or mixing concrete for foundation
8. Pouring concrete to foundation
9. Compacting and tamping concrete foundation
10. Inspection of foundation (feedback)
11. Load bricks and blocks for footings
12. Mix mortar materials for footing
13. Load mortar for footings
14. Construction of footings walls to dpc level
15. Drainage and pipe ground works
16. Concrete backfill below damp proof course (dpc) level
17. Compact soil area for concrete ground floor slab
18. Clean and Inspection of all substructure works (feedback)
19. Delivery of/or mixing of concrete materials for ground floor slab
20. Pouring concrete to ground floor slab
21. Compacting and tamping to concrete slab
22. Delivery of and/or erect scaffold and ladders
23. Load bricks and blocks for superstructure frame
24. Mix masonry mortar for cavity wall system
25. Load mortar using available equipment
26. Installation of damp proof course and adhesives
27. Set out house materials (frames, arches, lintels, etc.)
28. Construction of masonry cavity wall system above dpc
29. Roof frame erection (completion of roof, felt, battens, tiles, etc.) ceilings made
30. Clean, brush, and inspect brickwork and roof superstructures (feedback)
10
11. IMDS International Technical Journals Integrated Database Management & Information System
decisions, analysis results and comments between the various actors involved. For this purpose, an integrated
information system that integrates both product and process concepts is proposed.
Table 3: Actors Involved with Constructing Sub/Superstructure Systems for a House
3. AN INTEGRATED INFORMATION SYSTEM
3.1 Functional requirements for the integrated information system
The initial aim of improving collaboration and communications between construction team members, clients, and
other organisations providing specialised services provided a powerful justification for the work described in this
paper. The need for integrated information modelling systems capable of accommodating both product and process
information is becoming vital for construction companies in acquiring, structuring, manipulating, and exchanging
complex technical data, to be handled during the construction and operation stages of small to medium sized
building projects (SMsBP). In this regard, the proposed information system is mainly aimed at small to medium
sized enterprises (SME’s) who often have to face situations for which they do not have the necessary skills or tools
for the continuous updating of the technical information needed in projects. In addition, the integrated information
system will need to differentiate between the rational structuring of product and process models, so as to enable a
selection of competitive solutions intelligent enough to meet the identified requirements and given specifications. To
facilitate this, the main characteristics of the product and process models are classified in figure 4, and have been
structured in such a way, so as to meet the following functional requirements for the development of the integrated
information system:
• Supports a comprehensive data structure for storing, managing, retrieving and updating information during the
design and on-site construction stages of SMsBP.
• Define the product and process class categories of information required to support IT, IS and CRM applications
and the management of information systems during the design and on-site construction phases.
3 April 2008 Prepared by Dr A G Kimmance11
Site Manager: The person in charge of running the building
site and all its building activities.
Plant Contractor: The Company who supplies plant items (machinery, lorries and
equipment) for clearing, excavating, digging, removing and transporting building
materials (topsoil, concrete, bricks, etc.) on the building site.
Site Engineer: The person who performs surveying and engineering tasks such as setting
out the building site, planning, supervision, inspection and materials testing.
Building Materials The Company who suppliers and delivers building materials to the building site.
Supplier:
Forklift Operator: The person who distributes all materials on the building site using a forklift truck.
Cement Mixer Operator: The person who operates the mixer for making brick mortar on the
building site.
Bricklayer Contractor: The person who lays bricks/blocks (builds
brickwork structures) on building sites.
Building Labourer: The person who performs heavy manual labour chores and semi-skilled
building tasks on the building site.
12. IMDS International Technical Journals Integrated Database Management & Information System
• Combine code and text data (e.g. building code, regulations and standards, technical drawings, specifications,
environmental controls, time, costs, quality, safety, etc.) and multimedia data (e.g. building and equipment
images, graphical Web pictures, videos, 5th
dimensional model languages, VBA, 3D virtual applications).
• Supports information generated from heterogeneous sources to sustain an efficient decision-making process,
namely from client requirements, building regulations, material manufacturers, project data (time, durations,
etc.), resource textual and spatial data (size, measurements, etc) generated during the design and construction
phases, in addition to sources such as human resources essential for the management of information systems.
• Facilitates the integration of process models with product models through the use of hyperlinks and OLE data
transferring techniques set-up within object –oriented and ODBC applications.
• Compatible with existing domain information, database connectivity, modelling techniques and other concepts.
• To provide a certain degree of transparency, and intelligence support in a given context.
Figure 4: Integrated structure of product and process models
A number of other requirements need to be classified with respect to developing an integrated database information
system for construction project management purposes such as:
3 April 2008 Prepared by Dr A G Kimmance12
UnitHouse includes
Surrounding
tools
TempServices
Structure
name
function
Product Model
Materials
product
1
1..*1..*
has
Processes
name
Facility
0..10..1
located_in
has
describes
Building
0..1
uses
11
has
is_a
is_a is_a
0..1
1
Approachs
name
strategy
opname()
has
control
affect
Function
type
Plant
ConstructionAids
1..*
0..1
1..*
0..1
requires
Resourses
name
type
opname()
use
perform
determine _use_of
0..*
1
0..*
1
use
serves_function
controlled_by
include
Specs
type
opname()
controlled_by
ID Task Name Start End Duration
Jun 2001
6/3 6/10
1 5d11/06/0105/06/01Organise Site Resources
6/17 6/24
Jul 2001
7/1
2 2d12/06/0111/06/01Excavation
3 5d19/06/0113/06/01Construct Substructure
4 19d16/07/0120/06/01Construct Superstructure
5 21d18/07/0120/06/01Inspect and Improve
7/8
Su bstr uctu reSys tem
: Site Manager
Fo rkLiftO perato r Labour er BricklayerBuilder
1 : Giv eso rders
2: Distribu tes Materials
3: Loado ut Materials
4: Co nst ru ct
5: Verification
6: comp leted
Sequence Diagram
Load-out Materials
Concrete Foundation
Construct Footing
Inspect Work
Labourer
Builder
Site Agent
Approve Work
<<Extend>>
Conceptual Information Model
Conceptual View
Objects
A0
A1 A2 A3 A4 A5
A31A32 A33
IDEF0 Node
Diagram
A5
Inspect and
Approve Work
A2
Groundwork
Excavation
A3
Construct
Substructure
A4
Construct
Superstructure
A1
Organise
Site
Resource
Material
Resources
Construction
Constraints
House Frame
Constructed
Superstructure
constructed
Substructure
constructed
Site
Excavated
Site
Organised
C1
Building Needs
I2
Resources
I1
M2
Materials Resources
Construction
Equipment M1
Materials Resources
Project
Team
Materials Resources
Construction Equipment
Building Team
Construction Equipment
M3
Work Approved
Project
Team
Inspection
Environment
Regs
Progress
Information
Progress
Information
Work Progress
Information
Work Progress
Information
Inspection
Records
Information
Daily Progress Information
Daily Work Plan
Daily
Plan
Daily
Plan
Progress Info
Building
Specs
Material Check
Patially Used
Resources
O1
P-3
P-4
P-5
P-7
P-6
Technical
drawings
Project Data
Process Activity Data
Product Data
Product &
Process
Information
Documents
Standards
Regulations
Construction
Product and
Process Objects
Specifications Data
Design and Construction Phases
Use Cases
UML Object
Classes Data
Human Resources
Data
Actors Data
Hyperlinks and OLE Data Transfer
User
TrainingUser
TrainingUser
Training
objects
Information SystemGraphical User Interface
Requirements
13. IMDS International Technical Journals Integrated Database Management & Information System
• Flexibility: The system can be used in different situations (e.g. project types, industries, etc) and meet different
requirements as they occur.
• Ease of Use: The user is in control of the system and not the other way, and the system should be intuitive.
• Cost Effective: The resources spent on developing a system should be minimal in comparison with its benefits.
• Practical Application Classifications: The representation of the fundamental potential application and use of
the system’s environment, such as:
• Where the systems is to be used (e.g. management, procurement, construction, projects, engineering, etc).
• What the system is used for.
• Why the system is important.
• How the system is used.
• Who are the end users of the system?
• Classification of type, size, element, component, space, and limitations of the system.
3.2 Structure of the Information Models
The integrated view of product and process information relies on an explicitly formalised knowledge and
interpretations of the vast amounts of information accumulate, and the way in which data is handled during the
feasibility, design and construction stages of a project. In order to define the structure for the information models, an
iterative process was employed to ensure their relevance to, and practical application in, the construction industry.
Two approaches were followed.
The first is a top-down approach, which starts with the analysis of the construction processes in order to
capture and model the information in relation to the activities, operations and objects that are involved in the
construction process. The second technique is a bottom-up approach, in which the process starts with the
functionality of the system software, and from that point the information and building levels are analysed. As both
methods were used to develop the integrated conceptual model, several forms of modelling were necessary to
provide this information, such as process, functional, static and dynamic modelling.
3.2.1 Generic Construction Process Model (GCPM)
A top-down approach was applied in order to develop a detailed model of the infrastructure and building process for
the information system. The approach involved an iterative process using many of the IDEFØ suite, which provided
the means for modelling the environment constraints and external functions (e.g., activities, processes, operations,
etc.) and the functional requirements (e.g., flows between the inherent activities) using a series of hierarchical
process activity diagrams. An IDEFØ model is a graphical representation of a system that is developed for a specific
purpose and from a selected viewpoint (e.g. construction manager). The graphical diagram is the major component
of an IDEFØ model, containing boxes, arrows, interconnections and associated relationships (IDEF, 1993). The
boxes represent the functions of a subject; in the work described here, ‘construct house facility’. These functions,
described using verbs or verb phrases, are decomposed into more detailed diagrams, until the system is described at
a level necessary to support the objectives of a project. The arrows show the flow of information between the
different activities. Owing to the complexity of data generated from the process activities, a full description of all the
process activity diagrams is beyond the scope of this paper. Thus, for simplicity and readability reasons, only the
3 April 2008 Prepared by Dr A G Kimmance13
14. IMDS International Technical Journals Integrated Database Management & Information System
top-level context diagrams ‘construct house facility’ are presented as an example, and also illustrated in the
‘hierarchy node tree’ highlighted in Figure 5. A more detailed representation of the models can be found in
Kimmance (2002).
Figure 5: Functional hierarchy node tree for the “construct house facility” process
3 April 2008 Prepared by Dr A G Kimmance14
Construct Building
Facility
Organise Site
Resources
Groundwork
Excavation
Construct
Substructure
Construct
Superstructure
Inspect and
Approve work
Setout
and
Construct Drainage
Setout
and
Construct Walls
Setout
and
Construct Floors
Setout
and
Construct Roof
Fixture
and
Fittings
Underground
Service Systems
Construct
Foundation
SetUp and Errect
Scaffolding
Distribute the
Resources
Plan or
Work Scedule
Loadout Foundation
Materials
Setout and Concrete
Foundation
Setout and
Construct Footing
Setout and Construct
Concrete Slab
Clean Up and
Endorse Work
Survey and Level
Site Area
Excavation to
Work Area
Removel of Soil
Materials
Setout Building
Levels and
Hieghts
Enabling
Process
Material Ordering
Process
Material Location
process
Compliance of
specifications
Material
Inspection
Workmanship
Inspection
Approve and
Turn over
Building
A-0
A1 A2 A3 A4 A5
A11 A12 A13
A21 A22 A23 A24
A31 A32 A33 A34 A35
A331 A332 A333 A334 A335
A41 A42 A43 A44 A45
A51 A52 A53 A54
Inventory
and
Allocation
A14
1
2 3
4
A-0
A0
ConstructHouse
Facility Constructed
House
Resources
Environmental
Construction
Constraints
Construction
Team
Tools&Plant
Equipment
TOP LEVEL [IDEF0] DIAGRAM
House construction
Output
Thefinaloutcomeor
finishedproduct
Functionboxesandarrow
relationships(linelinks)
containHyperlinksto
decompositiondiagramsor
projectdocumentation
Building
Regulations
and
Standards
Controls
Internalandexternalconstraints
includingbuildingstandards,
environmentalregulations,health
andsafety(CDM),etc.
Input
Representsresourcesneededto
constructthehousesuchasbuilding
materialresourcesandprojectsneeds
Mechanism
Constructionresourcessuchasconstruction
plant,on-sitemachinery,equipment,tools,
Labour,trades.temporarystructures,computer
andsoftwaretools,etc.
TopLevelrepresentingthe
boundaryof thesystemand
definestheoverall scopeand
externalconnectionsofthe
processmodel
NODE: TITLE: NO.:ConstructBuildingFacility Page1A-0
VIEWPOINT:TheProject/ConstructionManageroverseestheconstrcutionoftheproject
PURPOSE: Thedefinition,analysisandmanagementofconstructionprocessactivites
15. IMDS International Technical Journals Integrated Database Management & Information System
Figure 6: Top-level IDEF0 activity diagram of the construction process model
Figure 6 illustrates the top-level diagram for the construction process model, and is used here to represent the on-
sites construction processes. The diagram contains a single process activity function box, ‘construct building
facility’ which transforms the input, ‘resources’, into the finished product output, ‘constructed house’, using the
mechanisms, ‘construction team’, ‘mechanical plant’, ‘tools’, and ‘equipment’. The controls, ‘building regulations
and standards’, and ‘environmental constraints’ provided the context for the ‘construct house facility’ activity. The
top-level diagram defines the overall scope and external elements and connections of the total construction process
model, and is decomposed into 5 main stages (sub-process activities), as illustrated in Figure 7.
Figure 7: Node A0 illustrating the five main activity stages of the GCPM
However, in its present form, IDEFØ has some limitations in addressing some of the very common typical business
system analysis problems such as the identification of objects (i.e. lack of a clear distinction between flow of
material objects and flow of information). As a consequence, it is unable to fully model process information flows,
due to its lack of time dependency representation. These limitations impose restrictions on the use of this modelling
technique for the development of information systems. The need to integrate other modelling methods capable of
capturing the sequences of the process activities or tasks and the resources used to perform them is evident.
To overcome this problem, scheduling the process activities detailed in the IDEFØ diagrams, by means of
attaching hyperlinks to scheduling applications were used. This method enabled the construction processes to be
decomposed into operational units (activities or tasks) and the resources used for performing them. Activities
represent the process that occurs over a certain time interval, identified by descriptive function labels (e.g. construct
substructure, construct foundation, construct walls, etc.); duration, and task attributes, such as start and end dates,
allowing the ‘duration’ of the activity to be calculated. Each process activity contains links or connections to project
scheduling information, which contain additional links to other information sources. Although, the representation of
information in scheduling methods can be limited (e.g. captured by simple textual description), they do however
draw upon a broad range of project information (product, process, resources, etc.), as well as providing critical path
analysis, and time dependency process flows, which is one of the limitations of IDEFØ.
3 April 2008 Prepared by Dr A G Kimmance15
A5
A51
Inspectand
Approv eWork
A2
A21
Groundwork
Excav ation
A3
A31
Construct
Substructure
A4
A41
Construct
Superstructure
A1
A11
Organise
Site
Resource
MaterialResources
Regulations &Standards
House
Constructed
Superstructure
constructed
Substructure
constructed
Site
Excavated
Site
Organised
C1
BuildingNeedsI2
Material
Resources
I1
M1
MobaliseSite
Material Resources
MaterialsResources
Equipment
Equipment
Work
Approved
ManagementTeam
Inspection
Environment
Regs
Progress
Information
Progress
and feedback
Information
WorkProgress
Information
WorkProgressInformation
Inspection
RecordsInformation
DailyProgressInformation
DailyWorkPlan
DailyPlan
DailyPlan
Progress Info
Resource Check
PatiallyUsed
Resources
O1
Construct House Facility Node: A0
ProjectTeam Plant&Equipment
M2
BuildingTeam
BuildingTeam
Standards
Regulations
BuildingSpecs
DailyApprovedPlan
BuildingTeam
Resourcecheck
Click to see
scenarios in the
documentation
section
Click boxes for
hyperlinks to
scheduling
infromation
NODE: TITLE: NO.:ConstructBuildingFacility Page2A0
Environment
Constraints
Hyperlinks to project
documentation
All arrow relationship lines
has hyperlinks to other
projectdocumentation
All Function boxes has
linlsto projectscheduling
infromation
NOTES
16. IMDS International Technical Journals Integrated Database Management & Information System
The GCPM is one of two generic information models that provided the foundation or structure for the integrated
conceptual model. The second key information model is the generic building product information model (GBPIM),
based on the Unified Modelling Language (UML), an integrated object-oriented (OO) process modelling technique.
3.2.2 The Generic Building Product Information Model (GBPIM)
The development of the building product model also involved an iterative process, to ensure its relevance to, and
practical application in, the construction industry. Its context is the on-site construction processes and its scope is the
type of information about such processes and the participants (e.g. construction managers, contractors, users, etc.).
After identifying the context and scope (captured and modelled in the construction process model), a bottom-up
modelling approach was applied utilising the features offered by UML. The basic idea behind the bottom-up
approach is to break down a building and its processes into classes of objects with information attributes, as well as,
completing the basic structure of the information architecture, with the aim of developing an integrated conceptual
model to support the management information during the construction stage. UML is a standard graphical modelling
language for specifying and constructing systems (i.e. a language used to specify, visualise and document the
artefacts of an object-oriented system) (Rumbaugh, et al. 1999; Kimmance 2000). It defines a set of nine basic
diagrams that provide the multiple perspectives (static and dynamic) of the system under analysis or development.
Standard modelling techniques may standardise and facilitate the development process through the use of common
concepts, notations and supporting tools and thus increase compatibility with other software systems.
Figure 8: Classification of breakdown of the building product data into classes and sub-classes
3 April 2008 Prepared by Dr A G Kimmance16
+operation() : Integer
-Attribute : String
Building
+operation() : Integer
-Attribute : String
Superstructure
+operation() : Integer
-Attribute : String
Substructure
+operation1()
-attribute1
Services
+operation2()
-attribute2
Finishes
FACILITY
+operation()
-attribute
Footing
+operation()
-attribute
Foundation
+operation()
-attribute
Slab
+operation()
-attribute
Wall
+operation()
-attribute
Floor
+operation()
-attribute
Roof
+operation()
-attribute
Raft
+operation()
-attribute
Strip
+operation()
-attribute
Pile
+operation3()
-attribute3
GardenWall
+operation()
-attribute
Cavity
+operation4()
-attribute4
InternalWall
+FIX:() : Integer
-TYPE : String
-SIZE: : String
-AMOUNT:
BuildingComponentTypes
+LAY:()
-attribute5
-attribute6
MasonryBrick
+Insulate()
-attribute7
-attribute8
MasonryBlock
-attribute9
RM-Concrete
-attribute10
LimeMortar
-attribute11
LBC-Brick
-attribute12
Eng-Brick
-attribute13
Butterfly-Tie
-attribute15
5T-DPC
-attribute16
InsulationBlock
-attribute14
PVC-Window
5a 5b 6a 6b 7a 7b 7c1 1a 1b 2a 2b 3a 3b 3c 3d 3e 4a 4b 5
Top-Level
Building Site
Top Product
Type-Level
Sub-Product Level
Building Element
Type-Level
Building Element
Sub-Level
Building Component
Type-Level
Building Component
Sub-Levels
Product Class Level
Breakdown Model
Generic
Levels
Specific
Levels
Functional Hierarchy
17. IMDS International Technical Journals Integrated Database Management & Information System
Figure 8 divides a facility into several classification levels, and is used here to illustrate how the classes of objects
(e.g., properties and things) decomposed into product element and component sub-levels. The classification model
shows the functional class hierarchy breakdown of a facility into its product parts and sub-parts; showing the top-
level site facility, top-level product type, sub-product level, building element types, sub-element level, building
component type, and sub-component levels. Classes at different levels have various degrees of detail (specification
levels) in this hierarchy of information. Entities within each level are broken down into unique, detailed categories
of information at the next lower level. For example, the top-levels focus on a more generic representation level,
which corresponds to the products and building elements of the sub-products (e.g. structure, foundation, wall, roof,
etc.). The lower levels focus on a specific class identifier levels, whereby the positions (x, y, z), lengths and sizes of
the building elements and components are identified and detailed. Once the classes were established, the next step
was to define the basic ‘core’ structure of the GBPIM. The requirements that were identified in the IDEF0 models;
use cases, and sequence diagrams are also included in the information structure of the class product model. The
basic entities in the definition of a construction environment and their relationships are described using the UML
Class notation. The main class entities of the core part of the building product model include: resources, processes,
products and actors, highlighted within the dotted line in figure 9.
Figure 9: Core of the integrated product information model using UML class notation
3 April 2008 Prepared by Dr A G Kimmance17
+Located:() : Integer
-Type: : String
Facility
+GetPlan()
+PrintPlan()
-Name : String
Surrounding
0..1
located_in
+GetPosition()
+SetPosition()
-Type: : String
-Storey : Integer
Building
is_a
+Start() : Integer
+Finish() : Integer
-Name : String
-Type
House
+SetArea()
-Type: : String
Factory
is_a
is_a
+GetFunction()
-Name: : String
-Function : Integer
Structure
0..1
1
has
+Find:()
-Type: : String
TempServices
requires
Gas Water Electric
+GetLocation()
-Type : String
Substructure
+SetHeight()
-Height : Integer
Superstructure
+Print()
-Name : String
-Type : String
Pruct Model
describes
+Start()
-Name : String
Processes
has
+Exacute()
-Name : String
Method
+Display()
+Add()
-Name : String
-Type : String
BuildingResources
controls
affects
controlled_by
determines_use_of
+Show()
+Find()
-Name : String
-Type : String
ProductElements
1
1..*
includes
+Find()
+Add()
-Name
-attribute1
Equipment
+Print()
+Get()
-Type
-Description
Plant
include
+GoTo()
-Name
-Type
ConstructionAids
includes
is_part_of
1..*
0..1
requires
requires
use
perform
+Find()
+Show()
-Name : String
-Trade
Actors
use
1..*
1..*
require
+Modify()
-Name
Specification
controlled-by
Document File
Resources: Needs, etc
Actors: Occupation, etc
maetrials: Brick, Block, etc
Equipment: Plant, etc
Tools: Trade, Craft, etc
Specs: Regs, Standars, etc
Click on class boxes to hyperlink
to scenarios in product document file
18. IMDS International Technical Journals Integrated Database Management & Information System
Figure 9 shows a class diagram of the simplified core product model used in the integrated information system’s
structure. The diagram represents object classes (entities), which contain hyperlinks to other diagrams and document
files connected by different types of relations: normal unidirectional relations (with cardinalities, single roles and
open arrows), bi-directional relations (with cardinalities and roles), specialisation (with closed arrows) and
aggregation (with diamond). Each Class contains attribute properties (above) and method operations (below). The
attributes and operations can be sorted into different classes depending on their information content. The operations
can relate to the actions or commands, which are performed in the user interface (e.g. find building component, print
report, add, delete, go to process information, etc.). The building product model basically describes the construction
process through the use of the building products (materials, components, elements, etc), which are used by the
actors to perform the processes (activities, functions, etc) that require resources (construction aids, plant, equipment,
etc), all controlled by specifications (requirements, regulations, approaches, etc). It must be pointed out that for
readability reasons only some (main core classes are modelled very schematically) examples are given, so as to keep
the description simple. A more detailed description can be found in Kimmance (2002).
3.2.3 The Integrated Conceptual Model
Following a detailed evaluation of the system requirements and information captured during the analysis stage, both
the top-down and bottom-up approaches were used in parallel to develop the ‘integrated conceptual model’, as
illustrated in figure 10.
Figure 10: Integrated conceptual model of the on-site construction process
3 April 2008 Prepared by Dr A G Kimmance18
A-0
A32 A33 A34A31 A35
INPUT Control Mechanism OUTPUT
Building
Resources
Standards
Regs
Environment
Constraints
Plans
Specs
Actors Plant
Product
Data
Tools
IDEF0ProcessInformationStructure
(DecomposedFunctionBoxes)
Sub-Activitiesdecomposedfrom
theToplevelcontextactivity
(ICOMCategoryNames)
TopLevelContextDiagram
ProcessActivityInformation
(ICOMCategory)
1b
1c
1a
1d
2d
1e2c
2b
3a
3b
2e
3c
4a3e
3d4b
4c
5a
5b
6a5c
5d
6b
2a
6c
6d
6e
7a
7b
8f
8a
7d
7c
8b
8c
8e
8d
ICOMArrowscanhavedifferentnamesandareinter-connectedtotheactivityfunctionboxes
UMLProductClassModelStructure
TopLevel
Product
Substructure Services Finishes Superstructure
Foundation
Footing
Slab
Wall Floor Roof
StripPil e Raft Blockwall Cavity Brickwall
TYPES:String
SIZE:String
AMOUNT:String
BuildingComponents
MortarConcrete DPCBricks TimberBlocks
Construct House
House
(Sub-Products)
(BuildingElementTypes)
(BuildingSubElements)
(BuildingComponentTypes)
(BuildingSubComponents)
1a
1b
1c
2a
2b
2c
3a
3b
4b
4c
5a
5b
6b
6c
1d
4a
3c
ProductandProcessIntegrationRelationshipLink
Integrated Link
Integration Link
Hierarchy Relationship Format
(ArrowNames)
Integration Link
Decomposed Integration HyperLink
Decomposed
Integration Link
Decomposes into
Relationships
6a
Schedule
Data Schedule
Data
Schedule
Data
Schedule
Data
Relationships
1*
1*
1* 1*
1..*
1..*
1*
Site
Resources
A1
Construct
Substrcuture
Construct
Superstrcuture
Inspect
A5A3 A4
Top Level
Process
A-0
1..*
1*
1..*
19. IMDS International Technical Journals Integrated Database Management & Information System
Detailed mapping and modelling of product and process information on to several levels were then carried out in
order to develop the integrated product and process model of the real-world problem domain. The integrated
conceptual model adopts a hierarchical format of the construction process information, described in the GCPM
(Figure 5), and the building product data, described in the GBPIM (Figure 8). The structure of both modelling
methods has been developed, so as to illustrate the relationships levels, and to identify the ‘specific’ type of product
and process information being integrated during the construction stage of SMsBP. The integrated conceptual model
represents the building objects, functions, and relationships handled throughout the on-site construction activities,
and is used here to illustrate how the information is decomposed and grouped to form the classes and subclasses,
which is then broken-down, organised and stored in a object-based relational database (i.e. the components of a
relational database containing the fields and objects of the product and process models. Therefore, the integrated
conceptual model represents the product and process information that have been decomposed in a hierarchical
manner, so as to facilitate the breakdown of the modelling data, which will be integrated into the database tables, to
create queries, reports forms (i.e. user interface screens) used by the system prototype application.
4. PROTOTYPE DEVELOPMENT
4.1 Implementation of the Product and Process Information Modelling System
A prototype software system for the implementation of the integrated conceptual model has been developed to map
the proposed concepts and emulate the on-site construction process. The system development reflects the need to
realise the benefits of concurrent engineering through the use of information technology, in addition to the growing
trend for the integrated construction information modelling tools and techniques to be computer-based. The
prototype not only demonstrated how the research relates to construction site practice, but also ensured that the
product and process models performed in accordance with the identified characteristics. It also facilitated an object-
based platform capable of managing, integrating, storing, viewing, editing, retrieving, up dating, report generating,
and integrates product and process construction project information.
The software selected had to be objected-based as it could then be used as a development tool for
client/server applications. For this situation, the system prototype was implemented utilising the programming
environment of Microsoft Access 2002 and the integration of Visual Basic for Applications (VBA) as its high level
programming language. The rationale behind the choice is that Access is a powerful database package and a
development tool within the MS Windows environment; it therefore ensures wide application as most construction
sites throughout the world only use standard desktop computers with the basic Microsoft Windows applications.
Using the capability of MS Access to attach to files stored on a SQL server, MS Access can be used as a
development platform to provide applications for enterprise-wide database tasks.
4.2 System Components
The integrated system components, illustrated in Figure 11, consist of three main ‘platforms’, each integrating
various processes, objects and components. The platforms were specifically structured to provide the end-users with
maximum ‘output’ in relation to integrating product and process information. A brief description of these stages
follows.
3 April 2008 Prepared by Dr A G Kimmance19
20. IMDS International Technical Journals Integrated Database Management & Information System
Figure 11: System components for the integrated information system (HIPPY)
4.2.1 Infrastructure platform
The first platform represents the technical infrastructure such as the hardware and software that supports the ‘input’
of data from users regarding the product and process information required during the on-site construction stage. The
hardware support includes user input operation devices (e.g. mouse, keyboard, scanner, etc.) and the graphical-
display ‘output’ devices (Pentium processor and a high–resolution PC monitor). The software provisions include
Microsoft Visual Basic, (MS) Office 2006, MS Access 2006, MS Project Manager 2006, and MS Visio 2006
applications, all utilising Visual Basic for Application (VBA) Code and implemented as a distributed set of Access
Objects for the Windows NT and Windows 98/2002/2006 platforms, in order to take full advantage of the
functionalities offered by the event-driven database-programming paradigm (e.g. Activity-X Data Objects (ADO),
Data Access Objects (DAO) and Object Linking and Embedding (OLE) concepts).
4.2.2 Database storage platform
The second platform represents the object-based development storage facilities, and consists of the components of a
relational database containing the fields and objects of the product and process models defined by the prototype’s
scope. The integrated product and process model is decomposed in a hierarchical manner, so as to facilitate the
breakdown of the modelling data, and integrated into the database tables, queries, forms, reports, and macros used
3 April 2008 Prepared by Dr A G Kimmance20
Product Data
Object, Classes,
Attributes, Methods
Database Entities
Process Information
Operations, Schedules
Tasks, Events
OLE-Database
Object, Linking and
Embedding Software
Modelling Data
Drawings, Charts
Pictures, Images
Internet Applications
Web File Hyper linking
E-mail Documents
Database on Products, Materials,
Equipment, Plant, Actors,
Controls, Standards, etc.
RESULTS
QUERY
[Platform 2]
Data Storage
Facility
Document
Data
HIPPY Database Interface
< Back Next >
Product Data
Browser Module
Process Information
Browser Module
Integrated Editing
Browser Module
Multiple Internet Links
Application File Links
INPUT
VB Application
Graphical User Interface
[Platform 3]
FLOW
Activity
Report PresentationsOUTPUT
OUTPUT OF INTEGRATED
PRODUCT AND PROCESS DATA
Technical Data
Internet Documents
Product and Process Data
Graphical Modelling
Drawings
Pictures and Images
Scheduling Information
Duration Times
Structural Measurements
Calculation Cost Data
Text Files
MS Application Editing
OLE and Hyper linking
Multiple Data Menus
Fax
Scanner
Video
INPUT of
Modelling
Data
MS Visio Modelling Tool
UnitHouse
includes
Surrounding
tools
TempServices
Structure
name
function
Product Model
Materials
product
1
1..*1..*
has
Processes
name
Facility
0..10..1
located_in
has
describes
Building
0..1
uses
11
has
is_a
is_a is_a
0..1
1
Approachs
name
strategy
opname()
has
control
affect
Function
type
Plant
ConstructionAids
1..*
0..1
1..*
0..1
requires
Resourses
name
type
opname()
use
perform
determine _use_of
0..*
1
0..*
1
use
serves_function
controlled_by
include
Specs
type
opname()
controlled_byA5
Inspect and
Approve Work
A2
Groundwork
Excavation
A3
Construct
Substructure
A4
Construct
Superstructure
A1
Organise
Site
Resource
Material
Resources
Construction
Constraints
House Frame
Constructed
Superstructure
constructed
Substructure
constructed
Site
Excavated
Site
Organised
C1
Building Needs
I2
Resources
I1
M2
Materials Resources
Construction
Equipment
M1
Materials Resources
Project
Team
Materials Resources
Construction Equipment
Building Team
Construction Equipment
M3
Work Approved
Project
Team
Inspection
Environment
Regs
Progress
Information
Progress
Information
Work Progress
Information
Work Progress
Information
Inspection
Records
Information
Daily Progress Information
Daily Work Plan
Daily
Plan
Daily
Plan
Progress Info
Building
Specs
Material Check
Patially Used
Resources
O1
P-3
P-4
P-5
P-7
P-6
File Edit View Insert Format Tools Help
Technical Infrastructure For
Information Input[Platform 1]
MS ACCESS 2002
Intranet-extranet connections
Project manager
21. IMDS International Technical Journals Integrated Database Management & Information System
by the prototype application. The data includes client requirements, building components and elements, etc., and the
activities and tasks needed to build the components.
4.2.3 Interface platform
The third platform represents a general-purpose graphical user interface (GUI), the prototype development platform
for managing and processing product and process information. The GUI is composed of several object modules,
which facilitate the storage and retrieval of information from the database storage facility. The GUI also contains
numerous browser forms and queries for retrieving product and process information with regard to the on-site
construction process (i.e. building a house). The arrows linking the modules indicate that entry, storage, viewing and
editing of responses, can be achieved at any instance in the processing stage. It has been implemented as a set of
Access objects, information models, Web pages and MS Office document files to support the different elements and
components. The output from the GUI includes numerous screen layouts with multiple menu choice, each providing
various macros, command buttons and text controls for accessing a variety of information, which the end user can
enter, view, display, and print integrated product and process document reports, and manipulate construction project
information during the on-site construction stage of SMsBP.
The data output from the prototype system can be viewed in a number of diverse formats. For example,
Project Management schedule planning charts and graphs, Visio modelling templates, CAD drawings, resource
schedules, graphical pictures and images of equipment, and hyperlinks attached to multiple MS Office, HTML and
files, in addition to viewing and modifying the underlying product and process models, schematics, plans and
documents using data transfer methods such as object, linking and embedding. The information captured, not only
consists of links to the usual concepts found in existing integrated project models (e.g. buildings, wall components,
activities, etc.) but also hyperlinks to construction project information including; client requirements, components,
measurements, estimating, costing, activity durations, times, actors, roles, resources, equipment, plant, building
standards and specifications, and environmental details in text format. For example, the tables store the product and
process data, queries allow end-users to get at the data in a rational way, and reports and forms containing controls,
such as, micros, text boxes and command buttons allow the data to be displayed in a user-friendly way.
4.3 Data Transfer Between the System’s Components and Applications
The Windows environment provides a high degree of compatibility between applications and, as a result, the
prototype system provides several ways of transferring data between applications. Hyper linking is one method by
which different links can be created between applications and their objects. The Windows clipboard is another
method by which different types of data: text (either standard text or DDE link data) and graphics (JPEG, bitmaps,
metafiles, etc) can be moved from one application to another. It is also possible to communicate between Windows
applications and ensure that product data is updated automatically. Two methods have been exploited, although
more could be utilised at a later date: dynamic data exchange (DDE) and object linking and embedding (OLE).
The DDE method allows links to be created between applications with DDE capabilities. Most, if not all, of
the applications used to create prototype system have DDE/OLE built in. The OLE method is an alternative form of
data transfer that allows applications or components to be activated from within another program allowing several
types of data to be processed. The prototype system supports two primary aspects of OLE: the compound document
architecture and the OLE automation facility (Kimmance, et. al., 2003).
3 April 2008 Prepared by Dr A G Kimmance21
22. IMDS International Technical Journals Integrated Database Management & Information System
5. SYSTEM OPERATION
5.1 Designing the System
The development of the database system involved a co-ordinated set of database objects, in the shape of tables,
forms, queries, macros, reports, modules and VBA code, which enable construction managers to maintain the data
contained within the database, as illustrated in table 4. This was carried out utilising the facilities provided within
MS Access, and linked with other MS applications for reviewing the integrated results of the product and process
information. The first task was to create the database file (mdb file), since this is the container that will eventually
hold a wide variety of different Access objects. Many tables were designed to store data (i.e. breakdown of the
information models, document files, hyperlinks, etc); queries were designed to retrieve the data in meaningful ways;
forms and reports were designed to display the results of the queries and the information stored in the tables, in such
a way that can be understood by the end users (construction managers); macros and VBA code (modules) provided
the logic which ‘glues’ the whole application together.
Table 4: MS Access components and use
Type of Access Object Meaning and Use
Table The part of the database that holds data. Tables are also known as datasheets. Table
columns are known as fields that contain data items; rows represent records in a
field.
Query A set of conditions that provide for retrieval of certain records from a table.
Queries are based on tables or other queries
Form Customised manner for inputting data or presenting data on a screen.
Report Provides the specifications for output of data in a tabular format or otherwise
Macro A set of Access commands that cause action. These commands are stored in
miniature programmes
Module A collection of Visual Basic for Applications (VBA) statements grouped together
as a programme. Modules are used to provide specialised processing calculations
that cannot be accomplished with ordinary Access methods
Figure 12 illustrates the operational system architecture of HIPPY. The main user-interface provides access to all the
object screens, which are interconnected. The arrows linking the object boxes indicate that entry, storage, viewing
and editing of information, can be achieved at any stage of the process. The user-interface also displays a list of
options containing the most frequently undertaken activities with one or more choices that enable new users to open
the various other pages. These contain buttons and menus for accessing the relevant forms, and for displaying and
printing reports (output), which the construction manager will need to view or edit as appropriate. Navigation
control and human computer interaction (HCI) issues are particularly important and will, to a large extent, govern
the success of the systems in terms of its use and communication of knowledge and information. Navigation control
has been introduced to allow users with different levels of knowledge and computer literacy to utilise the systems.
Also, self-assessment of knowledge acquisition by the designer has been made available (to new users) to check on
theory, practical issues, legislations, and administration. The design of the system is structured to include a flexible
environment, not only regarding the various applications, information models, processes, products, and construction
resources used in the produced solutions (output), but also regarding evolution (modification) of the information
itself. It was also conceived that a simple computationally efficient system and model scheme would be easier to use
and understand than complex and intelligent ones, so as to allow all levels of construction managers (e.g. training,
assistant, and experienced) to use the system.
3 April 2008 Prepared by Dr A G Kimmance22
23. IMDS International Technical Journals Integrated Database Management & Information System
Figure 12: Operational system architecture of HIPPY
5.2 Graphical User Interface
The prototype was initially designed to operate on a PC running Windows 2000 or better and requires Access 2000
(or above) to be installed. It needs about 10Mb of RAM disk space to store the application and at least 15Mb of
RAM to store data, although this may change. To start the application from Access menu, the user selects ‘File:
Open’. When file is first opened, the welcome screen for the system is automatically displayed, and contains a short
statement about what the application is, and what it can do, illustrated in figure 13. To proceed with integrating
product and process information, the user will need to open the main user interface. The main user interface displays
a list of options containing the most frequently undertaken activities with one or more choices that enable a non-
technical person to open the various other user interfaces (within the database) that list the relevant product and
process forms and reports that the user will need to view or edit as appropriate. This type of interface is called a
‘switchboard’, as shown in figure 14. Menu items also provide the user with access to all forms and reports. This
allows for continuous operation without the need to close a form before moving on to the next activity. However, to
minimise computer memory use, it is advisable that the user closes a form before going on to the next one.
3 April 2008 Prepared by Dr A G Kimmance23
How to Get
started
(welcome screen)
Explain About
HIPPY
Main User
Interface
Input
Process
Information
Input
Process
Information
Input
Process
Information
Input
Process
Information
Input
Process
Information
Input
Process
Information
second-level forms third-level formstop-level forms
Input
Product
Data
Input
Product
Data
Input
Product
Data
Input
Product
Data
Input
Product
Data
Input
Product
Data
top-level forms second-level forms third-level forms
View Integrated
Sources
View
Process
Reports
View
Process
Reports
View
Process
Reports
View
Process
Reports
View
Product
Reports
View
Product
Reports
View
Product
Reports
View
Product
Reports
View
Integrated
Reports
View
Integrated
Reports
View
Integrated
Reports
View
Integrated
Reports
Administration
PROCESS FORMS
PRODUCT FORMS
24. IMDS International Technical Journals Integrated Database Management & Information System
Figure 13: Welcome screen
Figure 14: Main switchboard control form
5.3 Forms for Integrating Product and Process Information
3 April 2008 Prepared by Dr A G Kimmance24
25. IMDS International Technical Journals Integrated Database Management & Information System
Generally, when construction managers receive information from the design team, usually in paper format, the
‘starting point’ is to classify the information with regard to the data entry levels. For this reason, the structuring of
the forms is designed in a similar hierarchical format to that of the information models, so as to enable data entry in
accordance with the information levels represented by the integrated product and process model. Structuring of the
forms is an iterative process, which involves the product and process information being categorised into a hierarchy
from general to specific (i.e. the first form defines the most general top-level process activities or product elements,
and are further decomposed into greater levels of detail). Thus, all other forms serve to define the information
needed to convert a structured set of activities and resource elements (actors, equipment, specifications, components,
etc) into the completed top-level process, in order to produce the specified output or end product; the ‘constructed
house facility’. Owing to the complexity of the data generated, a full description of all the interface forms is beyond
the scope of this paper. Thus, for simplicity and readability reasons, only the top-level product and process section
forms are presented as an example. A more detailed representation of the models can be found in Kimmance (2002).
5.3.1 Process forms
An example of the kind of form used for entering, viewing, and editing of graphical modelling data about the top-
level process is illustrated in Figure 15. The labels and object control buttons are designed to be self-explanatory
(e.g. when a user moves the mouse pointer over a control in a form, a message appears specifying a control tip,
which has been attached to that particular label or control). Also, users are provided with further instructions or
explanations on the status bar at the bottom of the form, whenever a text box or control button receives the focus.
This feature applies to all forms in the system. There are also provisions for the user to describe what the process
activity is about and a direct field link to other applications to view or create the activity diagram.
At the top of the form are text fields for entering the process ID, process name, node, description, and
process model data. The top-level process identification number (in this case ‘1’) for the example under
consideration is automatically generated when a new entry is made in the other fields (process name, node, etc).
However, because of the relationship between the top-level process and the other fields, data entry in at least one
field will need to be specified, otherwise a new entry for process ID will not be saved (this also applies to all other
forms in the HIPPY application). In addition to entering new data that best describes a process activity name of the
proposed house facility, process names can also be selected from the list in the drop-down combo box; when
clicked, all related data is automatically revealed in the associated fields. There are also provisions for the user to
describe what the process activity is about and a direct field link to view or create the activity diagram. Clicking on
the process model frame activates the OLE automation mechanism between the different MS applications of the
prototype system. This enables the user to edit, change, update, delete or develop a new diagram or schedule within
the software modelling tools original source file. It also enables the user to access a variety of product and process
information from various other data sources, on account of the multiple hyperlinks connected (attached) to the
diagram components.
It is appropriate to mention that when the user activates this activity by clicking in any of the model fields,
the diagram automatically opens the original source file, which also contains hyperlinks to other applications and
information source files. However, any changes made to these files, will automatically change and up date the
connected data fields within the HIPPY application (e.g., up date the master files).
3 April 2008 Prepared by Dr A G Kimmance25
26. IMDS International Technical Journals Integrated Database Management & Information System
Figure 15: Interface form showing top-level process information ‘construct house facility’
The subform, illustrated in figure 16 defines the decomposed main activity stages or sub-activities and the diagrams
associated with the top-level process. Data entry is carried out in a similar way (in accordance with above), although
much of this information can be generated automatically when data is entered in the second-level process forms.
Figure 16: Sub-activity interface form
3 April 2008 Prepared by Dr A G Kimmance26
Control
tip
Status Bar
Click Here
Combo box
Direct OLE link to diagram source file
Automatically numbers a new sub-activity when data is entered in either the name or node text boxes
navigates to the selected record (highlighted) in the sub-form and coloured in the model frame
27. IMDS International Technical Journals Integrated Database Management & Information System
For example, the user enters data in the subform process ‘1’ record (highlighted in Figure 15), clicks on the ‘review
process activities’ button, which automatically links the user to the second-level sub-process form (Figure 16),
where the sub-process activity information can be viewed or edited as appropriate. Double clicking on the activity
model frame also allows the user to edit the diagram such that when the diagram is modified, the embedded diagram
is also modified automatically. This rule or function applies to all forms with diagrams, or hyperlink source
functions connected to them. All forms also contain navigation controls, print, save, add, delete or find facilities,
and various command buttons allowing the user direct access to enter or view product data forms. Entry for the next
process is initiated by clicking on the ‘next record’ button, or by using the Access Windows menu at the top of the
form. To proceed with the processing (or data entry) of process information, the user will have to open the second-
level sub-process form, which enables process information to be decomposed and entered in finer levels of detail.
5.3.2 Inputting information in top-level product forms
In order to automate data exchange between the top-level product and process information forms, clicking the
‘review product data’ button (Fig 14) automatically activates the event procedure, linking the user to the top-level
product form. An example of the kind of form used for entering, viewing, and editing graphical modelling data
about the top-level products is illustrated in Figure 17. Inputting product information follows a similar approach to
that described for the process forms, whereby the first form defines the most general top-level product, while the
remaining forms are decomposed into finer levels of detail, and define the information needed to convert building
elements, components and sub-components into a completed product. The labels and object control buttons are also
designed to be self-explanatory, and users are provided with similar facilities for adding, deleting, saving, printing
and navigating between records and process information forms.
Figure 17: Top-level product information form
5.3.3 Inputting information in lower sub-level forms
3 April 2008 Prepared by Dr A G Kimmance27
28. IMDS International Technical Journals Integrated Database Management & Information System
The third level function box information form shown in figure 18 (top) is designed to allow the user more freedom
in entering, viewing and editing process information. The user also has the option of entering the start and finish
times of each activity function. This extra feature provides additional information with respect to the duration of
activities. As a result, generating primary knowledge (e.g. possible size or importance of activities) for when
decisions or changes have to be made at a later stage. The ICOM attributes (arrow names) describe the information
needed to perform the top-level activities (previously described in the other forms), and are entered in the ICOM
information sub-form at the bottom. The user can also view graphical or document files containing additional
product and process information from the ‘data link’ fields, or enter a new hyperlink to a diagram or document file
(this also includes links to other sources, such as Internet and HTML Web files). It is also important to mention that
other third and forth level forms have been developed specifically for inputting, finding or replacing activity ICOM
information. These forms allow a profile relating to the diagrams interconnections and hyperlinks to be assembled,
which are stored in the application database and accessible from the appropriate form.
Figure 18 (top) also shows a forth-level activity ICOM form, which has been specifically designed to input,
view and edit ICOM attributes in greater detail, through the use of sub-forms displaying detailed ICOM information
(arrows, relationships, etc) previously entered in higher level forms. The first sub-form provides for ICOM attributes
generated in the ‘ICOM information form’, and is directly linked to the second sub-form, which provides for the
entry of more detailed ICOM arrow names and relationships, such as a specific plant item, or team member. To
facilitate the structuring process, new information can be introduced in the ICOM fields, or existing ones rephrased,
and stored for reuse at a later time in the processing function. The decomposition from general (ICOMs) to specific
(ICOM arrows) is based on the ability of the lower sub-form to enhance the implementation of the higher sub-form.
On the other hand, the first sub-form provides justification for the second sub-form. For example, when a user
selects an ICOM record field in the first sub-form (highlighted in the process activity form), a list of ICOM arrows
required to perform the selected activity function is generated automatically in the second sub-form. The user can
then view or edit the ICOM arrows and other data links associated with the selected record. The user can also
preview the selected activity function fields by double clicking the ‘preview report’ button or by printing the record
currently displayed in the form.
Sub-product element forms have been designed to structure building elements and components in more
detailed, and follow a similar approach for entering information to that described for the process forms. The types of
building elements form illustrated in figure 18 (bottom) shows the decomposed sub-product information
‘substructure’. The top section of the form contains previously defined sub-product information. It also provides
hyperlink fields to allow the user to view or edit pictures/images (e.g. types of substructures or foundations) of the
sub-products (building elements), which can be used to determine the dimensions of the building element types,
illustrated in the top subform. The top subform provides the text fields for entering the building element dimensions
(e.g. height, length, width), and is directly linked to the second sub-form, which enables the user to enter more
detailed information with respect to the various building material components that are associated with the building
element. Entry for the next building element (e.g. footing, foundation slab, etc) is initiated by clicking on the ‘next’
button, or by using the Access navigation controls at the bottom of the form. Selecting a hyperlink field record, or
clicking on the appropriate view buttons, also provides access to other supplementary information, such as links to
product and process forms, document files and images or pictures. To enter, view or edit the element quantities, and
3 April 2008 Prepared by Dr A G Kimmance28
29. IMDS International Technical Journals Integrated Database Management & Information System
building components records in more detail, the user clicks on the ‘review building element’ button at the bottom of
the element type’s form.
At the top part of the ‘Element Form’ also illustraed in Figure 18 displays the product and process
information with regard to the element types (generated automatically from the pevious form), the interrelated
dimensions and calculated quantity of the element name, and other information associated with the building element
(e.g. foundation). The user can either view the existing information or enter new values in the appropriate dimension
fields. However, changes made to any of the numbers in the dimension fields will automatically change the
information previouly entered in the element type sub-form, and also the total quantity displayed in the ‘total
amount’ number field. Although, once the user saves this information, changes to the data will atomaticallly be
updated and saved to the original database source. The top sub-forms contain a list of the decomposed building
components and is directly linked to the second subform, which contains a list of the different types of each material
component that make-up the ‘element name’ (e.g. strip foundation), which in turn, is part_of the element type
(foundation). Clicking the ‘next record’ button or selecting the ‘brickwall footing’ element from the drop down list
box, initiates entry to the next building element. This form also provides the user with direct links to other product
forms, which have been specifically designed for entering building components and types of components.
Figure 18: exhibiting different user interfaces within the integrated database system HIPPY
3 April 2008 Prepared by Dr A G Kimmance29
30. IMDS International Technical Journals Integrated Database Management & Information System
5.4 Generating Product and Process Reports
Other forms for entering, viewing and editing product and process information provide similar features and user
interaction. Figure 19 shows the reports for the integrated relationships between the product and process forms into a
hierarchy from general to specific structure. Clicking on the ‘preview relationship’ button in the main interface
opens the report. The next form represents the top-level function boxes information, the process activity function
boxes (activity, ICOM, arrow connection, name, etc) as illustrated in figure 15, and can be viewed by clicking on the
appropriate process ‘report’ button. The last report represents the top-level building product, sub-product, and the
building elements dimensions associated with the product ID, and can be opened by clicking the ‘preview print
report’ button, as shown in figure 18 (bottom). All reports can be printed or previewed by clicking on the ‘report’
button on the appropriate forms, or by highlighting the records in any sub-form, and clicking the ‘go to main
interface’ button and previewing the information selected from the preview reports section. Only a few reports have
been generated here, so as to demonstrate how the Product and process information can be reviewed. Complete lists
can also be previewed or printed by clicking on the appropriate report functions or following the same procedure
previously described.
Figure 19: Showing various report forms generated in HIPPY
3 April 2008 Prepared by Dr A G Kimmance30
Integrated Relationships of Product and Process
Forms
Printed: 6th
March 2007
;
30 November 2006
Page 1-10
31. IMDS International Technical Journals Integrated Database Management & Information System
5.5 Integrated Product and Process Information Reports
The integrated information reports in Figure 20 displays both process and product information. It was specifically
designed for integrated product and process information, by attaching VBA code to specific product and process
data fields (highlighted in black) ‘only’. It is generated by selecting product and process information from the
appropriate sub forms, clicking on the ‘go to main interface’ button and previewing the integrated report from the
report section. However, it is appropriate to mention that at this stage; only a few selected forms and data fields have
been developed to support the integration of product and process report building, and are used here only to
demonstrate the output (integrated product and process reports) of the prototype system. A full report generation
module is being introduced, which would not only integrate text but also diagrammatic representation of the selected
data. In addition, all product and process forms will contain facilities for previewing and printing the displayed data;
users can also print the report directly from the previewed window. This additional feature provides the end-users
(construction managers) with a ‘new’ facility for integrating, viewing, editing and printing product and process
information concurrently, and therefore, helping to clarify their vision of the facility to be constructed. It also
provides an important step towards integration of the heterogeneous product and process information sources within
the construction industry. By integrating product and process information the user stands to benefit from a consistent
representation of the on-site construction process.
Figure 20: Report displaying the integration of product and process information
5.6 Benefits of the Prototype System
The prototype system offers many direct benefits to construction personnel, clients, and construction managers, in
the proactive management of product and process information. These include:
• An interactive database management software tool that can be used to access a diverse selection of
heterogeneous information sources during the planning, design and on-site construction stages of a project.
• Will assist a variety of building personnel, clients, contractors and construction project managers to clarify their
own vision and understanding of the building facility to be constructed, in that it ensures that product and
process information are clearly defined at the early stage of, and throughout the construction project process.
• Information models provide a dynamic graphical representation for understanding the site construction process.
3 April 2008 Prepared by Dr A G Kimmance31
3.402
2.160
3.402
2.160
3.402
2.160
3.402
2.160
3.402
2.160
3.402
2.160
3.402
2.160
3.402
2.160
3.402