Industrial sensor technology
•Download as PPTX, PDF•
0 likes•610 views
A sensor is a device that detects and responds to input from the physical environment. The specific input could be light, force, heat, motion, moisture, pressure, or any one of a great number of other environmental phenomena. The contemporary industrial world relies heavily on sensing devices and switches.
Report
Share
Report
Share
Recommended
Working Principals of Various Sensors
A light sensor detects ambient light levels and can include photoresistors, photodiodes, or phototransistors. It works by measuring changes in electrical resistance, voltage, or current caused by exposure to light. Light sensors have a wide range of applications including in street lights, cameras, alarms, and automatic lighting controls.
Telemetry
Telemetry involves measuring values at a remote location and transmitting the data to another location. It involves three steps - measuring a value, converting it to a signal, transmitting the signal, and reconverting it back to the original data. Factors like accuracy, whether the data is analog or digital, error detection/correction, and bandwidth influence telemetry system design. There are two main types - landline systems which use wires/cables over short distances, and radio frequency systems which use radio links from 1km to beyond 50km. Landline systems transmit current or voltage and have simple circuitry but limited range. Radio frequency systems transmit via radio links and are used for long range applications like spacecraft. Modulation schemes include amplitude modulation for
Types of sensors
Ultrasonic sensors use sound waves to detect objects and measure distances with millimeter precision under many conditions. Passive infrared (PIR) sensors detect infrared light given off by objects to trigger motion detectors. Temperature sensors like the TMP36 output a voltage linearly proportional to temperature in degrees Celsius without external calibration.
Basics of Sensors & Transducers
This article provides an introduction to the fundamental of Sensors and Transducers. It illustrates the different classifications of sensors and transducers. Explains capacitive, resistive and inductive transducers in brief. Also shows the examples under these types of transducers.
Signal conditioning unit
YOU CAN LEARN ABOUT BASICSOFSIGNALCONDITIONINGUNIT, #PROCESSINSIGNALCONDITIONINGUNIT, #AMPLIFICATION, #FILTERING, #ATTENUATION, #EXCITATION, #ISOLATION, #SURGEPROTECTION, #NEEDOFBIOAMPLIFIER, #TYPESOFBIOAMPLIFIER, #OPERATIONALAMPLIFIER, #INVERTINGAMPLIFIER, #NONINVERTINGAMPLIFIER, #DIFFERENTIALAMPLIFIER, #INSTRUMENTATIONAMPLIFIER, #REQUIREMENTSOFINSTRUMENTATIONAMPLIFIER, #ADVANTAGESOFINSTRUMENTATIONAMPLIFIER
Inductive proximity sensor
This document discusses inductive proximity sensors. It defines inductive proximity sensors as electronic devices that can detect metal objects without physical contact through the use of magnetic fields. It explains that inductive proximity sensors work by inducing eddy currents in nearby metal objects using a magnetic field, which are then detected. The document notes there are differences between shielded and non-shielded inductive sensors and provides examples of inductive sensor applications like position determination, camshaft interrogation, and use in wind power plants.
Introduction to mechatronics
This document provides an overview of mechatronics systems. It defines mechatronics as the synergistic integration of mechanical engineering, electronics, and computer technology. Mechatronics systems combine sensors, actuators, signal conditioning, power electronics, decision-making algorithms, and computer hardware/software. The document discusses the evolution of mechatronics through the industrial, semiconductor, and information revolutions. It also outlines the key elements of a mechatronics system, including actuators/sensors, signal conditioning, digital logic, software/data acquisition, and computers/displays. Examples of mechatronics applications are provided.
Industrial automation - Sensors and Transducers
This four-week training program provides fundamental knowledge of industrial automation and process control systems. Participants will learn about programmable logic controllers (PLCs), supervisory control and data acquisition (SCADA) systems, and distributed control systems (DCSs). The course covers sensors and transducers, PLC programming, SCADA configuration, DCS fundamentals, and automation projects. Upon completion, participants will receive a certificate in PLCs, SCADA, and DCS systems.
Recommended
Working Principals of Various Sensors
A light sensor detects ambient light levels and can include photoresistors, photodiodes, or phototransistors. It works by measuring changes in electrical resistance, voltage, or current caused by exposure to light. Light sensors have a wide range of applications including in street lights, cameras, alarms, and automatic lighting controls.
Telemetry
Telemetry involves measuring values at a remote location and transmitting the data to another location. It involves three steps - measuring a value, converting it to a signal, transmitting the signal, and reconverting it back to the original data. Factors like accuracy, whether the data is analog or digital, error detection/correction, and bandwidth influence telemetry system design. There are two main types - landline systems which use wires/cables over short distances, and radio frequency systems which use radio links from 1km to beyond 50km. Landline systems transmit current or voltage and have simple circuitry but limited range. Radio frequency systems transmit via radio links and are used for long range applications like spacecraft. Modulation schemes include amplitude modulation for
Types of sensors
Ultrasonic sensors use sound waves to detect objects and measure distances with millimeter precision under many conditions. Passive infrared (PIR) sensors detect infrared light given off by objects to trigger motion detectors. Temperature sensors like the TMP36 output a voltage linearly proportional to temperature in degrees Celsius without external calibration.
Basics of Sensors & Transducers
This article provides an introduction to the fundamental of Sensors and Transducers. It illustrates the different classifications of sensors and transducers. Explains capacitive, resistive and inductive transducers in brief. Also shows the examples under these types of transducers.
Signal conditioning unit
YOU CAN LEARN ABOUT BASICSOFSIGNALCONDITIONINGUNIT, #PROCESSINSIGNALCONDITIONINGUNIT, #AMPLIFICATION, #FILTERING, #ATTENUATION, #EXCITATION, #ISOLATION, #SURGEPROTECTION, #NEEDOFBIOAMPLIFIER, #TYPESOFBIOAMPLIFIER, #OPERATIONALAMPLIFIER, #INVERTINGAMPLIFIER, #NONINVERTINGAMPLIFIER, #DIFFERENTIALAMPLIFIER, #INSTRUMENTATIONAMPLIFIER, #REQUIREMENTSOFINSTRUMENTATIONAMPLIFIER, #ADVANTAGESOFINSTRUMENTATIONAMPLIFIER
Inductive proximity sensor
This document discusses inductive proximity sensors. It defines inductive proximity sensors as electronic devices that can detect metal objects without physical contact through the use of magnetic fields. It explains that inductive proximity sensors work by inducing eddy currents in nearby metal objects using a magnetic field, which are then detected. The document notes there are differences between shielded and non-shielded inductive sensors and provides examples of inductive sensor applications like position determination, camshaft interrogation, and use in wind power plants.
Introduction to mechatronics
This document provides an overview of mechatronics systems. It defines mechatronics as the synergistic integration of mechanical engineering, electronics, and computer technology. Mechatronics systems combine sensors, actuators, signal conditioning, power electronics, decision-making algorithms, and computer hardware/software. The document discusses the evolution of mechatronics through the industrial, semiconductor, and information revolutions. It also outlines the key elements of a mechatronics system, including actuators/sensors, signal conditioning, digital logic, software/data acquisition, and computers/displays. Examples of mechatronics applications are provided.
Industrial automation - Sensors and Transducers
This four-week training program provides fundamental knowledge of industrial automation and process control systems. Participants will learn about programmable logic controllers (PLCs), supervisory control and data acquisition (SCADA) systems, and distributed control systems (DCSs). The course covers sensors and transducers, PLC programming, SCADA configuration, DCS fundamentals, and automation projects. Upon completion, participants will receive a certificate in PLCs, SCADA, and DCS systems.
Sensors
There are many different types of sensors that can be used for various purposes based on their operating principles and outputs. Sensors can sense physical quantities like pressure, temperature, distance and detect properties of materials. They are classified according to their power source, output signal and detection method. Common sensor types include optical sensors, proximity sensors, switches, and those that detect specific physical quantities. Proximity sensors include inductive, capacitive and ultrasonic varieties. Limit switches can be configured for momentary or maintained operation. Digital and analog sensors provide different output signal types. Application of sensors depends on the sensing requirement.
Sensors
This presentation gives the information about: Robotic Sensors, covering syllabus of Unit-8, Sub: Industrial Robotics for BE course.
Sensor technology
This document discusses sensors and provides examples of different types of sensors. It begins with an introduction that defines a sensor as a device that measures a physical quantity and converts it into a signal. It then discusses the uses of sensors in various applications like cars, machines, medicine, and more. The document also summarizes the different types of sensors like optical sensors, microwave sensors, biosensors, and non-biological sensors. It provides examples of specific sensors like infrared sensors, photoelectric sensors, and discusses their properties and resolution.
Actuators
The document discusses different types of actuators. Actuators are devices that convert energy into motion. Common types include hydraulic actuators, which use fluid power to produce linear or rotational movement, pneumatic actuators, which use compressed air, and electric actuators like solenoids, motors, and piezoelectric actuators. Actuators are selected based on factors such as the required force, speed, precision, and environment. Actuators play an important role in converting control signals into physical motion in machines and devices.
Pe 4030 ch 2 sensors and transducers part 1 final sept 20 2016
The document discusses various types of sensors and transducers. It defines sensors as devices that produce an output signal in response to a physical input. Transducers are defined as devices that convert a signal from one form of energy to another. Common transducers include temperature sensors, pressure sensors, and position sensors. The document provides examples of different types of position sensors such as potentiometers, strain gauges, linear variable differential transformers (LVDTs), and optical encoders. It also discusses important specifications for sensors like sensitivity, accuracy, resolution, and hysteresis.
Magnetic sensors
The document discusses different types of sensors including resistive, capacitive, piezoelectric, magnetic, and strain gauge sensors. It provides details on resistive sensors and their major types like potentiometers, strain gauges, thermistors, and light dependent resistors. The document also describes capacitive sensors, piezoelectric transducers, magnetic sensors like Hall effect sensors, and variable reluctance sensors. Finally, it covers strain gauge sensors, their working, and applications.
Sensors and their applications
This presentation provides an overview of optical sensors, including their introduction, working principles, classification, applications, and future trends. Optical sensors are classified as either extrinsic or intrinsic based on whether the light interacts with the measurand inside or outside of the optical fiber. They have a wide range of applications in areas such as temperature, chemical concentration, strain, biomedical, and more. The presentation concludes that optical sensor technology will continue to improve and be an important area of research going forward.
Proximity sensors
Proximity sensors detect objects without physical contact using various technologies like inductive, capacitive, ultrasonic and optical. Inductive sensors detect metallic objects using a coil and oscillator to create a magnetic field. Capacitive sensors detect metallic and nonmetallic objects by measuring capacitance changes between the sensor and object. Ultrasonic sensors use sound waves above human hearing range, while optical sensors use light beams reflected off objects. Key features of good sensors include precision, accuracy, response speed, operating range, reliability, easy calibration and low cost.
Resistive transducers and Strain Gauge
The transducer whose resistance varies because of the environmental effects such type of transducer is known as the resistive transducer. The change in resistance is measured by the ac or dc measuring devices. The resistive transducer is used for measuring the physical quantities like temperature, displacement, vibration etc.
The measurement of the physical quantity is quite difficult. The resistive transducer converts the physical quantities into variable resistance which is easily measured by the meters. The process of variation in resistance is widely used in the industrial applications.
The resistive transducer can work both as the primary as well as the secondary transducer. The primary transducer changes the physical quantities into a mechanical signal, and secondary transducer directly transforms it into an electrical signal.
Working Principle of Resistive Transducer
The resistive transducer element works on the principle that the resistance of the element is directly proportional to the length of the conductor and inversely proportional to the area of the conductor. equation-1
Where R – resistance in ohms.
A – cross-section area of the conductor in meter square.
L – Length of the conductor in meter square.
ρ – the resistivity of the conductor in materials in ohm meter.
The resistive transducer is designed by considering the variation of the length, area and resistivity of the metal.
Applications of Resistive Transducer
The following are the applications of the resistive transducer.
Potentiometer – The translation and rotatory potentiometer are the examples of the resistive transducers. The resistance of their conductor varies with the variation in their lengths which is used for the measurement of displacement.
Strain gauges – The resistance of their semiconductor material changes when the strain occurs on it. This property of metals is used for the measurement of the pressure, force-displacement etc.
Resistance Thermometer – The resistance of the metals changes because of changes in temperature. This property of conductor is used for measuring the temperature.
Thermistor – It works on the principle that the temperature coefficient of the thermistor material varies with the temperature. The thermistor has the negative temperature coefficient. The Negative temperature coefficient means the temperature is inversely proportional to resistance.
Actuators
This document discusses different types of actuators including hydraulic, pneumatic, electric, piezoelectric, and MEMS actuators. It provides details on the working principles of each type of actuator. Hydraulic actuators use hydraulic fluid pressure to create motion according to Pascal's law. Pneumatic actuators use compressed air to power motion. Electric motors generate torque using magnetic fields and electric currents. Piezoelectric actuators utilize the piezoelectric effect to create vibrations and motions. MEMS actuators can be thermal or electrostatic and are very small microactuators.
Smart sensors and their Application
The document discusses smart sensors, providing details on their architecture, fabrication, advantages, disadvantages and applications. Some key points:
- Smart sensors integrate a sensor, analog/digital converter, processor and communication interface on a single chip, allowing them to process and communicate sensor data.
- The basic architecture includes a sensing element, amplifier, ADC, memory, processor and communication components. Fabrication uses techniques like micro-machining and bonding.
- Advantages are reduced system load and faster operation. Applications include industrial monitoring, automotive controls, biomedical devices, and smart dust networks of tiny sensors. Disadvantages include higher initial costs and issues with mixing old and new devices.
introduction to mechatronics
This document provides an introduction to mechatronics. It defines mechatronics as the synergistic integration of mechanical engineering, electronics, control engineering, and computer science for the design of computer-controlled electromechanical systems. Mechatronic systems combine mechanical components with electronic equipment and computers to create systems that sense and control motion. Examples of mechatronic systems include robots, autonomous vehicles, and industrial machinery.
Control System Components
Control System Components
*Pressure Measurement.
*Temperature Measurement.
*Flow Measurement.
*Level Measurement.
*Concentration Measurement.
Robotics unit3 sensors
1) Sensors are devices that detect physical quantities and convert them into signals that can be measured. They are needed for industrial monitoring, safety, and automation.
2) Common sensors include position, proximity, range, touch, and force sensors. Position sensors like LVDT and RVDT convert linear or angular displacement into electrical signals.
3) Sensors have characteristics like range, sensitivity, accuracy, and response time that determine their effectiveness. Understanding sensor types and properties is important for robotics applications.
Sensors
The document discusses sensors, defining them as devices that measure physical quantities and convert them into signals. It describes qualities of good sensors such as sensitivity and lack of influence on the measured property. Additionally, it covers common sensor types, errors, and measurement definitions like sensitivity, deviation, and resolution.
Industrial Automation
This document presents information about automation and its various applications. It defines automation as delegating human control functions to technical equipment to increase productivity, quality and safety while reducing costs. It describes different types of automation including building, office, scientific and industrial automation. It provides details about control systems, programmable logic controllers (PLCs), PLC programming languages and ladder logic. It also discusses supervisory control and data acquisition (SCADA) systems, their features and leading software. Finally, it outlines advantages and disadvantages of automation as well as examples of its applications.
Load cell-transducer
Load cells are transducers that convert an applied force into an electrical signal. There are several types of load cells including resistive, capacitive, vibrating wire, piezoelectric, hydraulic, and pneumatic. Resistive load cells use strain gauges to measure deformation from applied forces. Capacitive load cells measure deformation capacitively. Vibrating wire load cells monitor loads in structural elements. Piezoelectric load cells generate voltage when force is applied to piezoelectric materials. Hydraulic load cells use fluid pressure from piston movement to measure force. Pneumatic load cells balance applied force with counteracting air pressure.
Power point presentation on Industrial Automation
This document summarizes a seminar presentation on industrial automation. It discusses automation tools like PLCs and SCADA used to automate industrial processes. It defines automation and describes the advantages it provides like improved accuracy, reduced costs, and increased production. PLCs are described as programmable devices that can automate industrial tasks by reading sensor inputs, running user-defined logic, and controlling outputs. SCADA systems allow remote monitoring and control of distributed industrial processes. The document outlines the components and applications of PLCs and SCADA and concludes that combining them provides an effective way to safely operate and monitor industrial machines.
Introduction to Mechatronics, Sensors and Transducers
Introduction: Definition, Multidisciplinary Scenario, Evolution of Mechatronics, Design of Mechatronics system, Objectives, advantages and disadvantages of Mechatronics
Transducers and sensors: Definition and classification of transducers, Difference between transducer and sensor, Definition and classification of sensors, Principle of working and applications of light sensors, proximity switches and Hall Effect sensors.
Mems sensor
Microelectromechanical Systems (MEMS) are miniature devices comprising of integrated mechanical (levers, springs, deformable membranes, vibrating structures, etc.) and electrical (resistors, capacitors, inductors, etc.) components designed to work in concert to sense and report on the physical properties of their immediate or local environment, or, when signaled to do so, to perform some kind of controlled physical interaction or actuation with their immediate or local environment
Innovative Detector Technologies in Industrial Automation.pdf
Detectors stand as crucial tools for optimizing efficiency, ensuring quality, and safeguarding assets and personnel. As technology continues to evolve, the role of detectors will only grow in significance, driving innovation, and enabling the next generation of smart, connected industrial systems. By understanding the diverse functionalities and applications of detectors, businesses can unlock new opportunities for productivity gains, cost savings, and competitive advantage in an increasingly automated world.
Non-contact Liquid Level Sensors Market Geographical Expansion & Analysis Gro...
Non-contact Liquid Level Sensors Market Geographical Expansion & Analysis Growth Development, Status, Recorded during 2024 to 2033
More Related Content
What's hot
Sensors
There are many different types of sensors that can be used for various purposes based on their operating principles and outputs. Sensors can sense physical quantities like pressure, temperature, distance and detect properties of materials. They are classified according to their power source, output signal and detection method. Common sensor types include optical sensors, proximity sensors, switches, and those that detect specific physical quantities. Proximity sensors include inductive, capacitive and ultrasonic varieties. Limit switches can be configured for momentary or maintained operation. Digital and analog sensors provide different output signal types. Application of sensors depends on the sensing requirement.
Sensors
This presentation gives the information about: Robotic Sensors, covering syllabus of Unit-8, Sub: Industrial Robotics for BE course.
Sensor technology
This document discusses sensors and provides examples of different types of sensors. It begins with an introduction that defines a sensor as a device that measures a physical quantity and converts it into a signal. It then discusses the uses of sensors in various applications like cars, machines, medicine, and more. The document also summarizes the different types of sensors like optical sensors, microwave sensors, biosensors, and non-biological sensors. It provides examples of specific sensors like infrared sensors, photoelectric sensors, and discusses their properties and resolution.
Actuators
The document discusses different types of actuators. Actuators are devices that convert energy into motion. Common types include hydraulic actuators, which use fluid power to produce linear or rotational movement, pneumatic actuators, which use compressed air, and electric actuators like solenoids, motors, and piezoelectric actuators. Actuators are selected based on factors such as the required force, speed, precision, and environment. Actuators play an important role in converting control signals into physical motion in machines and devices.
Pe 4030 ch 2 sensors and transducers part 1 final sept 20 2016
The document discusses various types of sensors and transducers. It defines sensors as devices that produce an output signal in response to a physical input. Transducers are defined as devices that convert a signal from one form of energy to another. Common transducers include temperature sensors, pressure sensors, and position sensors. The document provides examples of different types of position sensors such as potentiometers, strain gauges, linear variable differential transformers (LVDTs), and optical encoders. It also discusses important specifications for sensors like sensitivity, accuracy, resolution, and hysteresis.
Magnetic sensors
The document discusses different types of sensors including resistive, capacitive, piezoelectric, magnetic, and strain gauge sensors. It provides details on resistive sensors and their major types like potentiometers, strain gauges, thermistors, and light dependent resistors. The document also describes capacitive sensors, piezoelectric transducers, magnetic sensors like Hall effect sensors, and variable reluctance sensors. Finally, it covers strain gauge sensors, their working, and applications.
Sensors and their applications
This presentation provides an overview of optical sensors, including their introduction, working principles, classification, applications, and future trends. Optical sensors are classified as either extrinsic or intrinsic based on whether the light interacts with the measurand inside or outside of the optical fiber. They have a wide range of applications in areas such as temperature, chemical concentration, strain, biomedical, and more. The presentation concludes that optical sensor technology will continue to improve and be an important area of research going forward.
Proximity sensors
Proximity sensors detect objects without physical contact using various technologies like inductive, capacitive, ultrasonic and optical. Inductive sensors detect metallic objects using a coil and oscillator to create a magnetic field. Capacitive sensors detect metallic and nonmetallic objects by measuring capacitance changes between the sensor and object. Ultrasonic sensors use sound waves above human hearing range, while optical sensors use light beams reflected off objects. Key features of good sensors include precision, accuracy, response speed, operating range, reliability, easy calibration and low cost.
Resistive transducers and Strain Gauge
The transducer whose resistance varies because of the environmental effects such type of transducer is known as the resistive transducer. The change in resistance is measured by the ac or dc measuring devices. The resistive transducer is used for measuring the physical quantities like temperature, displacement, vibration etc.
The measurement of the physical quantity is quite difficult. The resistive transducer converts the physical quantities into variable resistance which is easily measured by the meters. The process of variation in resistance is widely used in the industrial applications.
The resistive transducer can work both as the primary as well as the secondary transducer. The primary transducer changes the physical quantities into a mechanical signal, and secondary transducer directly transforms it into an electrical signal.
Working Principle of Resistive Transducer
The resistive transducer element works on the principle that the resistance of the element is directly proportional to the length of the conductor and inversely proportional to the area of the conductor. equation-1
Where R – resistance in ohms.
A – cross-section area of the conductor in meter square.
L – Length of the conductor in meter square.
ρ – the resistivity of the conductor in materials in ohm meter.
The resistive transducer is designed by considering the variation of the length, area and resistivity of the metal.
Applications of Resistive Transducer
The following are the applications of the resistive transducer.
Potentiometer – The translation and rotatory potentiometer are the examples of the resistive transducers. The resistance of their conductor varies with the variation in their lengths which is used for the measurement of displacement.
Strain gauges – The resistance of their semiconductor material changes when the strain occurs on it. This property of metals is used for the measurement of the pressure, force-displacement etc.
Resistance Thermometer – The resistance of the metals changes because of changes in temperature. This property of conductor is used for measuring the temperature.
Thermistor – It works on the principle that the temperature coefficient of the thermistor material varies with the temperature. The thermistor has the negative temperature coefficient. The Negative temperature coefficient means the temperature is inversely proportional to resistance.
Actuators
This document discusses different types of actuators including hydraulic, pneumatic, electric, piezoelectric, and MEMS actuators. It provides details on the working principles of each type of actuator. Hydraulic actuators use hydraulic fluid pressure to create motion according to Pascal's law. Pneumatic actuators use compressed air to power motion. Electric motors generate torque using magnetic fields and electric currents. Piezoelectric actuators utilize the piezoelectric effect to create vibrations and motions. MEMS actuators can be thermal or electrostatic and are very small microactuators.
Smart sensors and their Application
The document discusses smart sensors, providing details on their architecture, fabrication, advantages, disadvantages and applications. Some key points:
- Smart sensors integrate a sensor, analog/digital converter, processor and communication interface on a single chip, allowing them to process and communicate sensor data.
- The basic architecture includes a sensing element, amplifier, ADC, memory, processor and communication components. Fabrication uses techniques like micro-machining and bonding.
- Advantages are reduced system load and faster operation. Applications include industrial monitoring, automotive controls, biomedical devices, and smart dust networks of tiny sensors. Disadvantages include higher initial costs and issues with mixing old and new devices.
introduction to mechatronics
This document provides an introduction to mechatronics. It defines mechatronics as the synergistic integration of mechanical engineering, electronics, control engineering, and computer science for the design of computer-controlled electromechanical systems. Mechatronic systems combine mechanical components with electronic equipment and computers to create systems that sense and control motion. Examples of mechatronic systems include robots, autonomous vehicles, and industrial machinery.
Control System Components
Control System Components
*Pressure Measurement.
*Temperature Measurement.
*Flow Measurement.
*Level Measurement.
*Concentration Measurement.
Robotics unit3 sensors
1) Sensors are devices that detect physical quantities and convert them into signals that can be measured. They are needed for industrial monitoring, safety, and automation.
2) Common sensors include position, proximity, range, touch, and force sensors. Position sensors like LVDT and RVDT convert linear or angular displacement into electrical signals.
3) Sensors have characteristics like range, sensitivity, accuracy, and response time that determine their effectiveness. Understanding sensor types and properties is important for robotics applications.
Sensors
The document discusses sensors, defining them as devices that measure physical quantities and convert them into signals. It describes qualities of good sensors such as sensitivity and lack of influence on the measured property. Additionally, it covers common sensor types, errors, and measurement definitions like sensitivity, deviation, and resolution.
Industrial Automation
This document presents information about automation and its various applications. It defines automation as delegating human control functions to technical equipment to increase productivity, quality and safety while reducing costs. It describes different types of automation including building, office, scientific and industrial automation. It provides details about control systems, programmable logic controllers (PLCs), PLC programming languages and ladder logic. It also discusses supervisory control and data acquisition (SCADA) systems, their features and leading software. Finally, it outlines advantages and disadvantages of automation as well as examples of its applications.
Load cell-transducer
Load cells are transducers that convert an applied force into an electrical signal. There are several types of load cells including resistive, capacitive, vibrating wire, piezoelectric, hydraulic, and pneumatic. Resistive load cells use strain gauges to measure deformation from applied forces. Capacitive load cells measure deformation capacitively. Vibrating wire load cells monitor loads in structural elements. Piezoelectric load cells generate voltage when force is applied to piezoelectric materials. Hydraulic load cells use fluid pressure from piston movement to measure force. Pneumatic load cells balance applied force with counteracting air pressure.
Power point presentation on Industrial Automation
This document summarizes a seminar presentation on industrial automation. It discusses automation tools like PLCs and SCADA used to automate industrial processes. It defines automation and describes the advantages it provides like improved accuracy, reduced costs, and increased production. PLCs are described as programmable devices that can automate industrial tasks by reading sensor inputs, running user-defined logic, and controlling outputs. SCADA systems allow remote monitoring and control of distributed industrial processes. The document outlines the components and applications of PLCs and SCADA and concludes that combining them provides an effective way to safely operate and monitor industrial machines.
Introduction to Mechatronics, Sensors and Transducers
Introduction: Definition, Multidisciplinary Scenario, Evolution of Mechatronics, Design of Mechatronics system, Objectives, advantages and disadvantages of Mechatronics
Transducers and sensors: Definition and classification of transducers, Difference between transducer and sensor, Definition and classification of sensors, Principle of working and applications of light sensors, proximity switches and Hall Effect sensors.
Mems sensor
Microelectromechanical Systems (MEMS) are miniature devices comprising of integrated mechanical (levers, springs, deformable membranes, vibrating structures, etc.) and electrical (resistors, capacitors, inductors, etc.) components designed to work in concert to sense and report on the physical properties of their immediate or local environment, or, when signaled to do so, to perform some kind of controlled physical interaction or actuation with their immediate or local environment
What's hot (20)
Pe 4030 ch 2 sensors and transducers part 1 final sept 20 2016
Pe 4030 ch 2 sensors and transducers part 1 final sept 20 2016
Introduction to Mechatronics, Sensors and Transducers
Introduction to Mechatronics, Sensors and Transducers
Similar to Industrial sensor technology
Innovative Detector Technologies in Industrial Automation.pdf
Detectors stand as crucial tools for optimizing efficiency, ensuring quality, and safeguarding assets and personnel. As technology continues to evolve, the role of detectors will only grow in significance, driving innovation, and enabling the next generation of smart, connected industrial systems. By understanding the diverse functionalities and applications of detectors, businesses can unlock new opportunities for productivity gains, cost savings, and competitive advantage in an increasingly automated world.
Non-contact Liquid Level Sensors Market Geographical Expansion & Analysis Gro...
Non-contact Liquid Level Sensors Market Geographical Expansion & Analysis Growth Development, Status, Recorded during 2024 to 2033
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptx
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptxMessung Industrial Automation & Controls
ABOUT SEWAGE TREATMENT PLANTS
Sewage is the waste generated from residential, institutional, commercial and industrial establishments.
Due to the hazardous impacts of municipal, industrial and hospital wastewater on water, soil, air and agricultural products, wastewater treatment and the proper disposal of the sludge produced are indispensable from an environmental safety point of view.
Moreover, reuse of sewage is the most sustainable and long-term solution to the problem of water scarcity.
Sewage Treatment Plants (STP) treat the sewage and waste water to produce a cleaner, more environmentally friendly effluent that is safe for disposal, gardening/agricultural use or domestic use in toilets, etc.
Physical, chemical, and biological processes are used to remove contaminants and produce treated wastewater (or treated effluent) that is safer for discharge into the environment.shubham seminar report.pptx
it was made for fun and uploading for helping mhy friends who are currently studing in college and need seminaar
DEHUMIDIFIER MACHINE AUTOMATION WITH MESSUNG'S NX-ERA XPRESS
DEHUMIDIFIER MACHINE AUTOMATION WITH MESSUNG'S NX-ERA XPRESSMessung Industrial Automation & Controls
ABOUT DEHUMIDIFIERS
•A machine that removes excess moisture from the air.
•Industrial dehumidifiers are built to be transported and used in several hard-wearing locations.
•Commercial and industrial dehumidifiers reduce mold, condensation dripping from pipes or windows, and eliminate musty smells.
Setpoint Process Automation Overview
This document summarizes Setpoint Integrated Solutions, a company that provides process automation solutions. It states that Setpoint's mission is to be a premier process solutions partner by bringing together industry expertise and world-class products into fully integrated solutions. Setpoint has engineers, technicians, and subject matter experts to ensure customer automation needs are fully realized and supported throughout projects. It also provides state-of-the-art training facilities and an integrated technology center for hands-on experience with new technologies.
Wireless Temperature Sensors are Transforming Manufacturing.pdf
Smart technologies have become an innovational. Industrial wireless sensors are one such breakthrough that is revolutionising the sector. The way temperature monitoring is done in manufacturing facilities is fundamentally changing. These devices, also offer essential information and insights for wiser decision-making.
MESSUNG SPREADS ITS WINGS TO PROVIDE HOLISTIC TECHNOLOGY SOLUTIONS FOR THE F&...
MESSUNG SPREADS ITS WINGS TO PROVIDE HOLISTIC TECHNOLOGY SOLUTIONS FOR THE F&...Messung Workplace Technology
Messung Group, based in Pune, India, is a diversified conglomerate offeringholistic technology solutions for industry.From being a leading PLC manufacturer and industrial automation systems provider, the Group has evolved to encompass three broad businesses, namely Automation & Control, Electrical Engineering and Workplace Technologies. Messung is now a one-stop source for a complete package of technology solutions for practically every need in the Food &Beverage (F&B) industry. GROWING EXPERTISE, EXPANDING PORTFOLIO:MESSUNG GROUP
Messung Group is an Indian conglomerate that provides industrial automation and control solutions. It offers a diverse portfolio of products and services across various industries. Over four decades, Messung has grown from launching India's first PLC to becoming a leader in industrial automation with expertise in areas like factory automation, building management, power distribution, and workplace technology. Today, Messung continues to innovate and expand its capabilities to enhance productivity for customers through integrated automation solutions.
THE FUTURE OF INDUSTRIAL VALVE MANUFACTURING: INNOVATIONS AND TRENDS SHAPING ...
Industrial valve manufacturing plays a crucial role in various sectors, including oil and gas, power generation, water treatment, pharmaceuticals, and many others. As technology continues to advance and industries become more complex, the future of industrial valve manufacturing holds immense potential for innovation, efficiency, and sustainability.
Intelligent Sensor Management From Ingold
Continuous improvement in process equipment efficiency is an
important business driver. Process analytic measurement solutions
that enhance product quality and yield, while simultaneously
reducing operating costs, are going to be of increasing
value.
sentri en data sheet
The SensEvolution SenTrI® product line integrates advanced measuring technology with innovative solutions to enhance modularity, ease of configuration, and adaptability. It combines the latest state-of-the-art technology with over 60 years of industry experience. The system can measure physical and chemical parameters such as temperature, humidity, velocity, pressure, and level/interface in gases, liquids, solids, and steam. It achieves high accuracy and reliability through principles like ultrasonic, differential pressure, vortex, thermal, and turbine sensors. The system offers flexibility through customizable analog/digital inputs and outputs to adapt to customer needs.
MESSUNG’S EXPERTISE IN ENSURING HEALTHY OPERATIONS FOR PHARMA MANUFACTURING
MESSUNG’S EXPERTISE IN ENSURING HEALTHY OPERATIONS FOR PHARMA MANUFACTURINGMessung Workplace Technology
The pharma industry offers little margin for error. Hence Automation is required right from the Formulation stage to the final preparation of medicine in the form of pills, tablets, capsules, vials etc. Medication has a significant impact on people's health - and indeed, life - so quality control is of paramount importance.MESSUNG LEADS THE WAY IN INDUSTRIAL AUTOMATION & CONTROL
Messung Group is an organisation on a mission: to take India at par with the world's best in industrial excellence. Messung works closely with businesses and users, understands their needs and challenges; identifying opportunities and technologies to bring the most relevant solutions that contribute to their customers' success.
PIONEERING START
In 1981, Messung was born, and by 1983, had launched India's first indigenous PLC - Meprolog-H. From that pioneering start, Messung grew to become a market leader in industrial automation, continuously adding to their ever-expanding portfolio of factory automation & control solutions in India. These sophisticated products helped Indian industry offer increasingly complex machine tools and processes to compete with international brands for features, while retaining the product and services costs at a justifiable price point.
Chapter 2 Sensors_3rd Edition_Feb2017.pdf
Sensors are essential input devices for automation systems. They interact with the physical environment and convert physical parameters into signals that can be relayed to control systems. Sensors have a wide range of industrial applications including detection and measurement of physical properties, improving manufacturing quality and yield, checking product quantity and quality, and hazard control. The type of sensor used depends on factors like the property being measured, operating environment, required output type, and performance specifications like resolution, accuracy, and range.
PT TRISIMAINDO
PT TRISIMAINDO is supporting it’s customers to bring excellent products with good supports with knowledgeable team in the industries. From sensor & monitor for cable, motor, valve, solar farm, wind farm, transformers, Switchgear, busbar up to Internet of things (IOT) software. We have equipment that can support industries of Oil & Gas, Power Generation, Petrochemical, Mining down to Automotive, Transmission, Distributions, Steel Company, Cement Industry, Fertilizer also factory in Automotive, Packaging & Medical Equipment, Electric Vehicle Industries.
PT TRISIMAINDO born in 2021 and always there and ready to support it’s customers.
We are your trusted partner.
Understanding Process Control Systems: The Backbone of Modern Manufacturing
Delve into the world of industrial automation with this presentation exploring Process Control Systems (PCS). Imagine a conductor overseeing a complex orchestra – that's essentially what a PCS does in a factory. We'll dissect how these intelligent systems work, from the sensory network that constantly monitors conditions like temperature and pressure, to the control unit that analyzes data and makes real-time adjustments. This presentation will showcase how actuators, acting like the instruments in the orchestra, respond to the conductor's (controller's) commands to maintain optimal process conditions. Discover how this control loop ensures consistent product quality, maximizes efficiency, and prioritizes safety in various industries, from chemical plants to power generation facilities. By the end, you'll gain a deeper appreciation for the invisible hand that guides modern industrial production and its impact on our everyday lives.
MESSUNG AUTOMATION SOLUTIONS FOR THE PLASTICS INDUSTRY
AUTOMATION IN PLASTIC INDUSTRY
The plastic industry relies increasingly on automation to improve productivity, reduce operating costs and create innovative products.
Automation in plastic industry has helped to reduce the human content in the manufacturing process, enhancing accuracy, speed and quality, especially in repetitive tasks.
Messung's connections with India's plastic industry goes back three decades.
Based in Pune, Messung develops customised automation and control solutions for automation in plastic machinery and automation in plastic manufacturing process.
With more advanced diagnostics, controls, and tremendous growth in software sophistication, Messung’s industrial automation and control can help manufacturers rise to the challenge of constantly-growing demands for lower cost and optimisation
industrial plant monitoring with all sensors paraments
1. This document describes an IOT-based system for monitoring industrial parameters remotely.
2. The system uses various sensors to monitor parameters like temperature, gas levels, humidity, voltage and current. It also uses a voice module to provide voice alerts to workers.
3. Data from the sensors is sent to a server in real-time to allow remote monitoring and control of industrial automation processes and parameters from an Android app. This reduces the need for manual monitoring and control.
IRJET- Industrial Automation with a Smart Robot and Mobile Control
The document proposes developing an industrial automation system using a smart robot and mobile control that can automatically monitor industrial applications for safety hazards like gas leaks and fires. The system uses sensors on a robot like LDR, temperature, and smoke detectors to detect hazards and conditions, and sends alerts to a mobile device connected over WiFi if issues are found so they can be addressed remotely. The proposed system aims to provide remote monitoring and control of industrial equipment and automation through a smartphone application for convenience and safety.
Similar to Industrial sensor technology (20)
Innovative Detector Technologies in Industrial Automation.pdf
Innovative Detector Technologies in Industrial Automation.pdf
Non-contact Liquid Level Sensors Market Geographical Expansion & Analysis Gro...
Non-contact Liquid Level Sensors Market Geographical Expansion & Analysis Gro...
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptx
SEWAGE TREATMENT PLANTS WITH MESSUNG'S NX-ERA XPRESS SERIES.pptx
DEHUMIDIFIER MACHINE AUTOMATION WITH MESSUNG'S NX-ERA XPRESS
DEHUMIDIFIER MACHINE AUTOMATION WITH MESSUNG'S NX-ERA XPRESS
Wireless Temperature Sensors are Transforming Manufacturing.pdf
Wireless Temperature Sensors are Transforming Manufacturing.pdf
MESSUNG SPREADS ITS WINGS TO PROVIDE HOLISTIC TECHNOLOGY SOLUTIONS FOR THE F&...
MESSUNG SPREADS ITS WINGS TO PROVIDE HOLISTIC TECHNOLOGY SOLUTIONS FOR THE F&...
GROWING EXPERTISE, EXPANDING PORTFOLIO:MESSUNG GROUP
GROWING EXPERTISE, EXPANDING PORTFOLIO:MESSUNG GROUP
THE FUTURE OF INDUSTRIAL VALVE MANUFACTURING: INNOVATIONS AND TRENDS SHAPING ...
THE FUTURE OF INDUSTRIAL VALVE MANUFACTURING: INNOVATIONS AND TRENDS SHAPING ...
MESSUNG’S EXPERTISE IN ENSURING HEALTHY OPERATIONS FOR PHARMA MANUFACTURING
MESSUNG’S EXPERTISE IN ENSURING HEALTHY OPERATIONS FOR PHARMA MANUFACTURING
MESSUNG LEADS THE WAY IN INDUSTRIAL AUTOMATION & CONTROL
MESSUNG LEADS THE WAY IN INDUSTRIAL AUTOMATION & CONTROL
Understanding Process Control Systems: The Backbone of Modern Manufacturing
Understanding Process Control Systems: The Backbone of Modern Manufacturing
MESSUNG AUTOMATION SOLUTIONS FOR THE PLASTICS INDUSTRY
MESSUNG AUTOMATION SOLUTIONS FOR THE PLASTICS INDUSTRY
industrial plant monitoring with all sensors paraments
industrial plant monitoring with all sensors paraments
IRJET- Industrial Automation with a Smart Robot and Mobile Control
IRJET- Industrial Automation with a Smart Robot and Mobile Control
More from reachfirst01
4 types of lubrication practices you may choose from
Lubricating the machine depends on four main types of lubricating practices that you can choose from. These are the approaches behind lubrication. The choice out of these four depends on which condition your machine is in, and the type of workload on the machine.
Fighting drug possession charges in canada
Every year thousands of different kinds of drug felonies are reported in Canada. They may include possession of a particular drug for personal use, trafficking, selling, or even importing. However, Under the Controlled Drug and Substance Act, it’s not entirely illegal to carry a drug under certain circumstances, for example, for research or medicinal purposes or in a controlled amount.
Who benefits from trees and how
There is no doubt that trees are beneficial not only to human beings but also to the nature and climate. Let us see who get benefits from the trees and how. It will make us realize the importance of planting and managing trees and plants. It will convince us to plant more and more trees as we will get to know how much benefits trees have.
How to create a business facebook page
To create a Facebook page for a business, one must first sign up at facebook.com/pages/create and provide basic information about the business. Then, important steps include adding representative profile and cover photos, creating a memorable username, including business details, telling the business story, and crafting the first post carefully as the initial impression. Finally, the page can be published to invite an audience and connect with millions without boundaries.
Top 4 cleaning tips for white interior wooden doors
The white interior wooden
doors get dirty easily, which
need to be cleaned regularly to
preserve their attractive
outlook. The most prominent
sections of these doors
requiring frequent cleaning
include doorknobs and
bottoms which come in direct
contact with our hands and
shoes.
4 unique styles of tattooing
The methods of tattooing vary as much as the human needs for bodily artistic expressions, which means there are many tattooing techniques out there which you can use. Here, we will discuss the 4 most common tattooing techniques.
Different types of assault charges in canada
Assault is a severe kind of offence in Canada and the world. At first, it seems to be a simple act, but with time, things become complicated for the accused when one looks at its consequences, such as dealing with criminal record upon conviction. According to the Canadian legal system, there’s a significant difference between violence that ends with mere public disapproval and the one which results in serious repercussions.
Top 5 water heater maintenance tips
one of its key components like a thermostat, heat source, or distribution channel might be the cause of the problem. The failure mostly originates from the source whenever a furnace stops functioning.
Why wooden doors have survived till now
Wood is a gift to us from the heavens. From making fire to making whole houses. Wood never ceases to amaze us. Wood as a construction material has no alternative.
7 tips for writing content that works
Digital Marketing relies upon content to get the message across. This is why the significance of content simply cannot be ignored. Knowing that content is the driving force behind a successful digital marketing strategy this presentation will give you tips for writing content that works.
Brothers moving-presentation
TUF-BAR develops and produces fiberglass rebar and accessories. The document contains multiple instances of Lorem Ipsum, which is dummy text commonly used in the printing and typesetting industry. It discusses how Lorem Ipsum has been used as standard dummy text since the 1500s.
5 reasons why financial planning is important
Most people do not realize the importance of financial planning and how it can help to meet your short and long term financial goals.
Types of oil filtration systems
Oil filtration is an essential process to provide clean, sediment-free lubricant to the industries and automotive. The motor oil that you put in your car’s engine needs to pass through filtration
systems so that all the impurities are filtered out.
How to create a facebook business page
To create a Facebook business page, one must first go to facebook.com/business and click "create a page." They then select their business category and fill in details like name, address, and page category. Images are uploaded for the profile and cover photos. A short description of 155 characters or less introduces the business. The username is set to match the business name. The about section provides service details, hours, location, and goals. The first post is then made to populate the new page with content for audiences.
Assault offences in Canada types
Assault offences have been categorized by the Canadian Criminal Code as an act of aggression. It may be in the form of a fistfight among a group of people or merely when a person raises their voice beyond the normal level.
Valuable plant shutdown tips
Annual plant shutdown can help you reduce unplanned downtime and improve overall operational efficiency. Here are some quick and valuable tips to help you make your next maintenance shutdown a success:
Guide to driving in winters
We master the art of working our way around it,
a major part of which is moving around. Let's take a look at some safe ways of doing that.
Jail time for a dui offence in canada
In Canada, drunk drivers can be charged with
impaired driving or driving over 80. If
convicted, you can get jail time along with
other sentences such as fines and license
suspension. If charged, consult an experienced
DUI lawyer.
Tips to extend equipment life and roi
Heavy industrial machines require regular maintenance to
function properly and remain in excellent working order. Here
is how you can extend the service life of your equipment and
improve your bottom line.
4 steps to creating your investment plan
This document outlines 4 steps to creating an effective investment plan: 1) Set realistic financial goals by consulting a financial planner; 2) Calculate how much money is needed for goals like retirement with help from an advisor; 3) Choose an investment strategy matched to goal timelines, from conservative for short-term to aggressive for long-term; 4) Prepare an investment policy statement detailing return expectations, risk tolerance, accessibility needs, goals, and monitoring strategies. Tracking progress and consulting competent financial planners can help effectively plan for the future.
More from reachfirst01 (20)
4 types of lubrication practices you may choose from
4 types of lubrication practices you may choose from
Top 4 cleaning tips for white interior wooden doors
Top 4 cleaning tips for white interior wooden doors
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Advanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
The aquaponic system of planting is a method that does not require soil usage. It is a method that only needs water, fish, lava rocks (a substitute for soil), and plants. Aquaponic systems are sustainable and environmentally friendly. Its use not only helps to plant in small spaces but also helps reduce artificial chemical use and minimizes excess water use, as aquaponics consumes 90% less water than soil-based gardening. The study applied a descriptive and experimental design to assess and compare conventional and reconstructed aquaponic methods for reproducing tomatoes. The researchers created an observation checklist to determine the significant factors of the study. The study aims to determine the significant difference between traditional aquaponics and reconstructed aquaponics systems propagating tomatoes in terms of height, weight, girth, and number of fruits. The reconstructed aquaponics system’s higher growth yield results in a much more nourished crop than the traditional aquaponics system. It is superior in its number of fruits, height, weight, and girth measurement. Moreover, the reconstructed aquaponics system is proven to eliminate all the hindrances present in the traditional aquaponics system, which are overcrowding of fish, algae growth, pest problems, contaminated water, and dead fish.
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
basic-wireline-operations-course-mahmoud-f-radwan.pdf
basic-wireline-operations-course-mahmoud-f-radwan.pdf
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Comparative analysis between traditional aquaponics and reconstructed aquapon...
Industrial sensor technology
- 2. ‘’ A sensor is a device that detects and responds to input from the physical environment. The specific input could be light, force, heat, motion, moisture, pressure, or any one of a great number of other environmental phenomena. The contemporary industrial world relies heavily on sensing devices and switches. INTRODUCTION
- 3. SIGNIFICANCE Contemporary factory automation systems increasingly use intelligent sensors for the information and data on which they operate. Modern sensors also offer the ability to analyze data.
- 4. Big concept The sensor technology is indispensable to a wide range of industries, providing critical information about variables such as pressure, temperature, flow, gas and position, which can have a profound impact on a number of manufacturing processes.
- 5. INTEGRATION What drives the adoption of sensor technology in the industrial sector is the availability of a solution that can provide seamless integration into existing automation systems. www.bpautomation.com
- 6. APPLICATION A liquid level sensor may be applied in industrial sectors ranging from paper, chemical, energy management, petroleum to food and beverage. Applications in these industries may include the use of sensors in cooling towers, fermentation vessels, fuel storage containers, blending and solvent level monitoring vessels, etc. www.bpautomation.com
- 7. Today, sensors offer a number of diverse capabilities, such as: Advanced capabilities Increased sensitivity, Faster response, Decreased hysteresis, Longer-term stability and durability, Multiple measurements, www.bpautomation.com
- 8. There is a broad range of industrial sensors used for controlling various processes. Some of them are: Common types of sensors Position sensors Pressure sensors Temperature sensors Force sensors Vibration sensors www.bpautomation.com
- 9. Industrial sensor needs The manufacturing industry stands to gain from the design of low-power micro sensors, embedded processors and radios that monitor a broad range of parameters on a factory floor to maintain production processes. www.bpautomation.com
- 10. Future challenges Future challenges are to achieve even better results, control systems must continue to improve their real-time responsiveness, reliability, accuracy, precision and overall sophistication. Important for meeting these challenges will be continued developments in networking and other connectivity technologies.
- 11. ABOUT BP AUTOMATION BP Automation, a leading industrial automation and engineering solutions provider in Canada, designs and manufactures state-of-the-art sensor technology for a number of industries. We help businesses enhance the efficiency of their manufacturing processed. www.bpautomation.com
- 12. Want big impact?