Se hablará sobre el proceso del magnetismo, también abordaremos los subtemas de ley de Ampere, flujo magnético.
Se demostrará ecuaciones de estas leyes, así como también aplicaciones en la vida diaria con respecto a este tema.
Maxwell's equation and it's correction in Ampere's circuital lawKamran Ansari
In this presentation, you will get the detailed information about the problem with Ampere's circuital law and how Maxwell corrected Ampere's circuital law in the case of changing electric field or electric flux and also about Maxwell's equation of electrodynamics.
Maxwell's equation and it's correction in Ampere's circuital lawKamran Ansari
In this presentation, you will get the detailed information about the problem with Ampere's circuital law and how Maxwell corrected Ampere's circuital law in the case of changing electric field or electric flux and also about Maxwell's equation of electrodynamics.
- describes how different magnetic materials behave in the presence of external magnetic field
- presents the difference between electric circuit analysis and magnetic circuit analysis.
Page 1 of 4
FARADAY’S LAW
Introduction
In this experiment, you will observe induced electromotive forces in a solenoid and compare
their time dependences with those predicted by Faraday’s Law.
The beginnings of modern electrical science and technology can be traced to two very
important discoveries in the early Nineteenth Century. The first, seen first in many different
contexts by several scientists, but generally called Ampere’s Law, recognizes that electrical
currents give rise to magnetic fields and gives the mathematical relationship between them.
Thus, for example, using Ampere’s Law (and Gauss’ theorem for magnetic fields, ∮ ���� ∙ ����� = 0),
one can deduce expressions for the magnetic fields associated with a conducting solenoid. The
solenoid used in this experiment is a long, tightly wound, circular coil of insulated wire. If the
solenoid has N1 loops, or “turns” over a total length L1, then when it is conducting a current I1, the
interior magnetic field is directed along the solenoid’s axis (in the direction of net current flow)
and has the magnitude
� =
�
����
��
(1)
where µ0 is the permeability of free space: µ0 = 4π × 10
-7
Tesla·meter/amp.
The second great discovery relating electrical and magnetic phenomena was the work of
Faraday, Henry and Lenz. Its mathematical expression is called Faraday’s Law.
Their experiments can be summed up as follows: an electromotive force is induced in a
conductor whenever there is a change in the magnetic flux going through the conductor. This
change of flux can be produced by changing the magnetic field; by changing the effective area
of the loop or both at the same time. The key to the induction process is change.
Qualitatively, Faraday’s Law says that a time-varying magnetic field induces electromotive
force, or non-electrostatic voltage drop, that can, among other things, cause currents to flow.
These currents will themselves generate additional magnetic fields which, according to Lenz’s
Law, will in general oppose the changes in the original magnetic fields, but this effect will have
very little bearing on your particular experimental results.
In order to fully understand how induction occurs in coils and to explain the different phenomena
the following set of basic concepts, that describe the relationship between the magnetic field and
charge, are summarized below:
A stationary charge does not generate a magnetic field. Only an electric field is generated. In
addition, a magnet has no effect on a stationary charge.
Charges moving in a specific direction at a constant speed will generate a constant magnetic
field in a given point of the space. It will generate also a constant electric field. However, the two
fields are uncoupled. If the stream of charges (or current line) is alternating in direction and
varying in strength over time, then so will be the generated magnetic and electric fields. In thi.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
2. Definición
• La inducción magnética es el proceso mediante el cual campos magnéticos
generan campos eléctricos. Al generarse un campo eléctrico en un material
conductor, los portadores de carga se verán sometidos a una fuerza y se
inducirá una corriente eléctrica en el conductor.
• Cualquier dispositivo (batería, pila…) que mantiene la diferencia de potencial
entre dos puntos en un circuito se llama fuente de alimentación.
3. Fuerza
Motriz
La fuerza electromotriz ε (fem) de una fuente
se define como el trabajo realizado por el
dispositivo por unidad de carga, por lo que las
unidades de fuerza electromotriz son los
voltios.
4. Ley de Faraday
• La ley que explica esta interacción entre la fuerza electromotriz inducida
y el campo magnético es la Ley de Faraday:
𝜀 = −
𝑑𝜙𝑚
𝑑𝑡
5. • La inducción magnética (B) se crea o se induce
por la intensidad de campo magnético (H), los
cuales no son lo mismo, y depende de la
siguiente fórmula:
• 𝐵 = 𝜇𝐻
• Donde μ es la permeabilidad magnética del
material al cual se le está induciendo el
magnetismo. Para el caso del aire 𝜇 = 𝜇0 =
4𝜋 ∗ 10−7[𝐻/𝑚] donde (𝐻) es henrio y (𝑚)
es metro. La Intensidad de campo magnético
(𝐻) se mide en [𝐴/𝑚] en SI.
• La unidad de la inducción magnética en el
Sistema Internacional de Unidades es el tesla.
6. • 𝐼 ⋅ 𝑑𝑙 =
𝑑𝑞
𝑑𝑡
⋅ 𝑑𝑙 →= 𝑑𝑞 ⋅
𝑑𝑙
𝑑𝑡
= 𝑑𝑞 ⋅ 𝑣
• ⇒ 𝐼 ⋅ 𝑑𝑙 = 𝑑𝑞 ⋅ 𝑣
• Está dado por:
• 𝐵 =
𝜇0
4𝜋
𝑞𝑣 ×𝑢𝑟
𝑟2
Donde, B es la densidad del flujo magnético generado
por una carga que se mueve a una velocidad v a una
distancia r de la carga, y 𝑢𝑟 es el vector unitario que
une la carga con el punto donde se mide B (el punto
r).
• o bien también:
• 𝐵 =
𝜇0
4𝜋
𝐼𝑑𝑙 ×𝑢𝑟
𝑟2
• Su módulo se puede calcular por medio de la
siguiente expresión:
• 𝐵 =
𝜇0
4
⋅
𝐼
𝜋 𝑙
𝑑𝑙⋅sin 𝛼
𝑟2
7. Campo magnético creado por
una corriente eléctrica rectilínea
• Si en vez de una corriente eléctrica
indefinida disponemos de una corriente
en línea recta, el cálculo del campo
magnético creado por dicha corriente se
simplifica enormemente.
• El valor del campo magnético creado por
una corriente rectilínea en un punto P se
obtiene por medio de la siguiente
expresión:
𝐵 =
𝜇0 ⋅ 𝐼
2 ⋅ 𝜋 ⋅ 𝑅
8. Comprobación
• Si aplicamos la definición de
campo magnético en un punto
P creado por una corriente
cualquiera, obtenemos que:
• 𝐵 =
𝜇0∙𝐼
4∙𝜋 𝑙
𝑑𝑙×𝑢𝑟
𝑟2
• Si observamos, el producto
vectorial de 𝑑𝑙 y 𝑟 provocará
que 𝐵 tenga la dirección
perpendicular a tu pantalla
orientado hacia dentro. En este
caso el módulo se obtiene por
medio de la siguiente
expresión:
• 𝐵 =
𝜇0⋅𝐼
4⋅𝜋 𝑙
𝑑𝑙×𝑢𝑟
𝑟2
• ⇒ 𝐵 =
𝜇0⋅𝐼
4⋅𝜋 𝑙
𝐼⋅𝑑𝑙⋅sin 𝛼
𝑟2
9. • sin 𝛼 = cos 𝛽
• 𝑑𝑠 = 𝑟 ⋅ 𝑑𝛽
• 𝑑𝑙 =
𝑑𝑠
cos 𝛽
• 𝑅 = 𝑟 ⋅ cos 𝛽
• Por lo que simplificando:
•
𝑑𝑙⋅sin 𝛼
𝑟2 =
𝑑𝑙⋅cos 𝛽
𝑟2 =
𝑑𝑠
𝑟2 =
𝑟⋅𝑑𝛽
𝑟2 =
cos 𝛽 ⋅𝑑𝛽
𝑅
• Aplicando esta expresión al cálculo del módulo del campo
magnético, podemos deducir que:
• 𝐵 =
𝜇0⋅𝐼
4⋅𝜋
⋅ 𝐿
𝑑𝑙⋅𝑠𝑖𝑛 𝛼
𝑟2
• ⇒ 𝐵 =
𝜇0⋅𝐼
4⋅𝜋⋅𝑅
⋅
−
𝜋
2
𝜋
2
𝑐𝑜𝑠 𝛽 ⋅ 𝑑𝛽
• ⇒ 𝐵 =
𝜇0⋅𝐼
4⋅𝜋⋅𝑅
⋅ 𝑠𝑖𝑛𝛽
−
𝜋
2
𝜋
2
• ⇒ 𝐵 =
𝜇0⋅𝐼
2⋅𝜋⋅𝑅
10. Campo magnético creado por
una corriente eléctrica que
circula por una espira
• El valor del campo magnético en el
centro de una espira circular creado
por una corriente eléctrica se obtiene
por medio de la siguiente expresión:
𝐵 =
𝜇0 ⋅ 𝐼
2 ⋅ 𝑅
11. Comprobación
• Aplicando la ley de Biot y Savart, la dirección y sentido
del campo magnético en el centro de la espira vendrá
dado por el producto vectorial entre 𝑑𝑙 y 𝑟:
• 𝐵 =
𝜇0
4⋅𝜋
⋅
𝐼⋅𝑑𝑙×𝑟
𝑟3
• ⇒ 𝐵 =
𝜇0
4⋅𝜋
⋅
𝐼⋅𝑑𝑙⋅𝑟⋅𝑠𝑖𝑛 90°
𝑟3
• ⇒ 𝐵 =
𝜇0⋅𝐼
4⋅𝜋⋅𝑅2 ⋅ 𝑑𝑙
• ⇒ 𝐵 =
𝜇0⋅𝐼
4⋅𝜋⋅𝑅2 ⋅ 2 ⋅ 𝜋 ⋅ 𝑅
• ⇒ 𝐵 =
𝜇0⋅𝐼
2⋅𝑅
13. FLUJO DE CAMPO
MAGNETICO
El flujo magnético es una medida del campo
magnético total que pasa a través de un área
dada. Es una herramienta útil para describir los
efectos de la fuerza magnética en algún objeto
que ocupa un área dada.
14. CALCULO DEL FLUJO DE CAMPO
MAGNÉTICO
• Si usamos la representación de líneas de campo
del campo magnético, entonces cada línea de
campo que atraviesa un área dada contribuye
con algo de flujo magnético. El ángulo al cual la
línea de campo se interseca con el área también
es importante.
15. • Si la superficie es perpendicular al campo, entonces el
ángulo es cero y el flujo magnético simplemente es:
17. LEY DE AMPÈRE
• En física del magnetismo, la ley de
Ampère, modelada por André-Marie
Ampère en 1831, relaciona un campo
magnético estático con la causa, es
decir, una corriente eléctrica
estacionaria.
18. Características
Ley de Ampere
El campo magnético es un campo
angular con forma circular, cuyas líneas
encierran la corriente. La dirección del
campo en un punto es tangencial al
círculo que encierra la corriente.
El campo magnético disminuye
inversamente con la distancia al
conductor.
19. Ley de Ampere
• La ley de Ampère determina
que la circulación del campo
magnético a lo largo de una
línea cerrada es equivalente
a la suma algebraica de las
intensidades de la corrientes
que atraviesan la superficie
delimitada por la línea
cerrada, multiplicada por la
permitividad del medio. En
concreto para el vacío:
20. Campo
magnético
en un
solenoide
• donde:
• μ es la permeabilidad
magnética del material que se
encuentra en el interior del
solenoide.
• I es la intensidad de la
corriente eléctrica que circula
por el solenoide. En el S.I. se
mide en Amperios (A).
• N es el número de espiras
que constituyen el solenoide.
• L es la longitud total del
solenoide. Su unidad en el S.I.
es el metro (m).
21. Permeabilidad magnética
• La permeabilidad magnética es una constante propia de cada
medio y de la cual depende la intensidad de campo magnético
• En el vacío:
• Para otros medios:
• Donde 𝜇𝑟 es la Permeabilidad magnética relativa; 𝜇 es la
permeabilidad del material; 𝜇𝑜 es la permeabilidad del vacío
22. CONCLUSIONES
La inducción magnética observada por Faraday muestra que
también es posible obtener corriente eléctrica mediante un
mecanismo mecánico. Esa forma de obtención de corriente
eléctrica es diferente de la que se obtiene en las pilas y
baterías, donde se obtiene producto de reacciones químicas.
La corriente así generada se denomina corriente inducida y el
fenómeno que la produce, inducción electromagnética.
Fenómeno de la inducción magnética: La corriente eléctrica
inducida surge en un conductor en reposo dentro de un
campo magnético variable con el tiempo o en un conductor
que se mueve dentro de un campo magnético estacionario,
de tal modo que siempre varíe el número de líneas de
inducción magnética que atraviesa el circuito.