Importance of structural design
•Download as PPTX, PDF•
3 likes•3,740 views
This presentation discusses structural design. Structural design applies math and science concepts to design structures for stability and sustainability. The structural design process involves several steps: 1) The architect designs the building layout. 2) The structural engineer designs the structure to fit the architecture and chooses structural systems. 3) A general layout is developed considering loads, material selection, and cost. 4) Loads are calculated and stress analysis is performed. 5) Structural elements are selected. 6) Drawings and specifications are created. 7) Approvals are obtained before proceeding to construction. Structural drawings use different scales and show dimensions, lines, and projections to convey design details.
Report
Share
Report
Share
Recommended
Design and analasys of a g+3 residential building using staad
This document presents a graduation project analyzing and designing a G+3 residential building using STAAD Pro software. The objectives are to carry out analysis and design of structural elements like slabs, columns, and shear walls and get experience with STAAD Pro and AutoCAD. The project building consists of 3 repeated floors in Hyderabad. The document discusses analyzing loads, modeling the building in STAAD Pro, designing columns, beams, slabs, and foundations, and concludes with the advantages and limitations of using structural analysis software.
Structural engineering ppt 1
Structural engineering is a field of civil engineering that deals with analyzing and designing structures to withstand loads by using various building materials and elements like columns, beams, plates, arches, and shells. Structural engineers design both buildings and civil infrastructure like bridges, dams, tunnels, and more by considering safety, economic, environmental and sometimes aesthetic factors. Common structural materials include steel, concrete, timber, masonry, and composites.
Structure analysis and design
Design and Analysis of Multistorey Building. It includes the Staad pro model and other preliminary details while doing design.
BASICS COMPONENTS OF BUILDING DRAWING FOR CIVIL ENGINEERS
The document discusses the basic components of building drawings and architectural conventions. It outlines 12 main components of a building - foundations, plinth, walls, columns and beams, floors, doors, windows, lintels and arches, stairs and lifts, roof, building finishes, and building services. Each component is briefly described. Architectural drawings aim to communicate a complete representation of a building using standardized annotations and material indications.
Framed structures
Framed structures are building skeleton frameworks formed by columns and beams. There are two main types: in-situ reinforced concrete frames and prefabricated frames. Rectangular framed structures use columns and beams arranged at right angles to support floors, walls, and roofs. They are commonly used for multi-story buildings like offices, schools, and hospitals. Framed structures provide large open floor plans and are adaptable to different shapes. Earthquake-resistant features in framed structures include shear walls, moment-resisting frames, and braced structures which resist lateral forces during seismic activity.
etabs ppt.pptx
ETABS is comprehensive software for modeling, designing, and analyzing 3D buildings. It allows for modeling of multistory buildings with plans, elevations, and 3D views. Key features include generation of loads like gravity, wind, and seismic loads according to various building codes. Elements include beams, columns, braces, walls, slabs, and joints which can be modeled to account for effects like axial, bending, torsional forces and deformations. Analysis options include linear static, linear dynamic, and static nonlinear analysis. Results include deformed shapes, bending moment diagrams, shear force diagrams and stress contours.
Structural elements and their arrangements
This document summarizes structural elements and their arrangements in architecture. It discusses key structural components like beams, columns, walls, trusses, and frames. It also describes different structural systems like load-bearing walls, frame structures, and form-active structures. Different joint types like discontinuous and continuous are also outlined. Historical context is provided by discussing Vitruvius' three principles of architecture. The relationship between architectural and structural design is examined through examples.
Etabs presentation
This document is a project report for the structural design of a residential apartment building in Lughaya, Somalia using the ETABS software. It includes the names of the 5 students in the group, the building design with plans and 3D views, load calculations, and the modeling and analysis in ETABS. The building has three main structures, and the report provides the dimensions and materials used for beams, columns, slabs, and walls. It also includes output from ETABS like moment and shear diagrams, load transfer, and rebar tables.
Recommended
Design and analasys of a g+3 residential building using staad
This document presents a graduation project analyzing and designing a G+3 residential building using STAAD Pro software. The objectives are to carry out analysis and design of structural elements like slabs, columns, and shear walls and get experience with STAAD Pro and AutoCAD. The project building consists of 3 repeated floors in Hyderabad. The document discusses analyzing loads, modeling the building in STAAD Pro, designing columns, beams, slabs, and foundations, and concludes with the advantages and limitations of using structural analysis software.
Structural engineering ppt 1
Structural engineering is a field of civil engineering that deals with analyzing and designing structures to withstand loads by using various building materials and elements like columns, beams, plates, arches, and shells. Structural engineers design both buildings and civil infrastructure like bridges, dams, tunnels, and more by considering safety, economic, environmental and sometimes aesthetic factors. Common structural materials include steel, concrete, timber, masonry, and composites.
Structure analysis and design
Design and Analysis of Multistorey Building. It includes the Staad pro model and other preliminary details while doing design.
BASICS COMPONENTS OF BUILDING DRAWING FOR CIVIL ENGINEERS
The document discusses the basic components of building drawings and architectural conventions. It outlines 12 main components of a building - foundations, plinth, walls, columns and beams, floors, doors, windows, lintels and arches, stairs and lifts, roof, building finishes, and building services. Each component is briefly described. Architectural drawings aim to communicate a complete representation of a building using standardized annotations and material indications.
Framed structures
Framed structures are building skeleton frameworks formed by columns and beams. There are two main types: in-situ reinforced concrete frames and prefabricated frames. Rectangular framed structures use columns and beams arranged at right angles to support floors, walls, and roofs. They are commonly used for multi-story buildings like offices, schools, and hospitals. Framed structures provide large open floor plans and are adaptable to different shapes. Earthquake-resistant features in framed structures include shear walls, moment-resisting frames, and braced structures which resist lateral forces during seismic activity.
etabs ppt.pptx
ETABS is comprehensive software for modeling, designing, and analyzing 3D buildings. It allows for modeling of multistory buildings with plans, elevations, and 3D views. Key features include generation of loads like gravity, wind, and seismic loads according to various building codes. Elements include beams, columns, braces, walls, slabs, and joints which can be modeled to account for effects like axial, bending, torsional forces and deformations. Analysis options include linear static, linear dynamic, and static nonlinear analysis. Results include deformed shapes, bending moment diagrams, shear force diagrams and stress contours.
Structural elements and their arrangements
This document summarizes structural elements and their arrangements in architecture. It discusses key structural components like beams, columns, walls, trusses, and frames. It also describes different structural systems like load-bearing walls, frame structures, and form-active structures. Different joint types like discontinuous and continuous are also outlined. Historical context is provided by discussing Vitruvius' three principles of architecture. The relationship between architectural and structural design is examined through examples.
Etabs presentation
This document is a project report for the structural design of a residential apartment building in Lughaya, Somalia using the ETABS software. It includes the names of the 5 students in the group, the building design with plans and 3D views, load calculations, and the modeling and analysis in ETABS. The building has three main structures, and the report provides the dimensions and materials used for beams, columns, slabs, and walls. It also includes output from ETABS like moment and shear diagrams, load transfer, and rebar tables.
Design of reinforced concrete beam
This document provides an overview of design in reinforced concrete according to BS 8110. It discusses the basic materials used - concrete and steel reinforcement - and their properties. It describes two limit states for design: ultimate limit state considering failure, and serviceability limit state considering deflection and cracking. Key aspects of beam design are summarized, including types of beams, design for bending and shear resistance, and limiting deflection. Reinforcement detailing rules are also briefly covered. Design examples are provided to illustrate bending and shear design of beams.
Introduction of Reinforced Concrete Design
Introduction of Reinforced Concrte Design, Advantages and DIsadvantages of RC, & Sample Computation of Loads
Staad Pro Intro
This document provides an overview of STAAD Pro structural analysis software. It discusses the history and introduction of STAAD Pro, the types of structures that can be modeled including buildings, staircases, water tanks, shear walls, and steel structures. The document outlines the STAAD Pro work flow including creating geometry, assigning loads and properties, running analyses, designing structures, and creating reports. It also presents some example student projects modeled in STAAD Pro.
staad pro
Structural Analysis And Design is a structural analysis and design software. It includes tools for 3D modeling, analysis, and design of structures according to various international codes. The software was originally developed by Research Engineers International and later acquired by Bentley Systems. It allows engineers to generate models using different elements like frames, plates, and solids. Various types of structures like trusses, planes, and spaces can be modeled and analyzed. The software provides tools for assigning properties, loads, boundary conditions, and performing analysis to calculate member forces and deflections. The results can then be used for structural design of elements like beams, columns, slabs, and foundations.
residential buliding by stadd pro
analysis and design of mutistoried residential building by using staad pro
we considered g+4 residential building
ANYLYSIS AND DESIGN OF HIGH RISE RESIDENTIAL BUILDING BY USING ETABS
copy below Link to view presentation
https://www.slideshare.net/ilavamsikrishna/analysis-and-design-of-high-rise-building-by-using-etabs
vamsiila@gmail.com
Introduction to Building Construction
Building Construction subject is basic subject for understand construction techniques,methods and it is also foundation subject for learn Building Planning & drawing + advance construction technology
The basics of structural engineering
Structural engineering involves relating physical forces to structural elements that resist them. Analysis determines forces in each element of a defined structure, while design configures elements to resist known forces. The process iterates between analysis and design until complete. Structures resist vertical and horizontal loads, and include large items like bridges as well as everyday items. Structural design requires data on the structure type, site conditions like soil properties, and loading conditions from dead and live loads, wind, and earthquakes as defined by codes. Design methods are selected based on local practices.
Design & Analysis of G+2 Residential Building Using STAAD Pro
We have analysed and designed R.C.C building using STAAD Pro consisting of 3 appartments on each floor.
DESIGN OF FLAT SLABS
This document summarizes the key aspects of flat slab construction and design according to Indian code IS 456-2000. It defines flat slabs as slabs that are directly supported by columns without beams, and describes four common types based on whether drops and column heads are used. The main topics covered include guidelines for proportioning slabs and drops, methods for determining bending moments and shear forces, requirements for slab reinforcement, and an example problem demonstrating the design of an interior flat slab panel.
PLANNING AND DESIGN OF G+3 RESIDENTIAL HOUSING COMPLEX (Share By Suman Sau)
The document outlines the planning and design of a G+3 residential housing complex project. It discusses the objectives of designing a 17 unit apartment building with 3 stories using RCC framing. It describes the key elements of the complex like residential buildings, roads, school, and amenities. It also discusses the software used like AutoCAD and STAAD Pro, the methodology of selecting the site, creating master plans and designs, and analyzing the structure. Load cases, design of beams, columns, and slabs are also summarized.
Basic principles of design for rcc building
The document discusses building maintenance, common defects, and remedial methods for RCC structures. It describes three main common defects: foundations, walls, and concrete/RCC frames. For foundations, common issues include differential settlement, uplift of shrinkage soil, and dampness. For walls, issues include cracking, dampness penetration, and failure during cyclones. For concrete frames, common problems discussed are seepage/leakage, spalling of concrete, and corrosion of steel reinforcement. The document provides detailed remedial methods for addressing each of these defects.
MODERN CONSTRUCTION METHODS
The document discusses various modern construction technologies including concrete walls and floors, precast cladding panels, 3D volumetric modules, twin wall technology, flat slabs, thin joint masonry, insulating concrete formwork, and precast concrete foundations. These technologies aim to reduce costs and construction time while improving quality, through the use of prefabricated concrete elements constructed in a controlled factory environment and assembled on site.
Design of steel structures Introduction
Basics of Steel Structures with diagrams of steel building. Introduction about design of connections with bolt, weld
Reinforced cement concrete
Reinforced cement concrete (RCC) uses steel reinforcement within concrete to improve its tensile strength. Concrete is strong under compression but weak under tension. Steel reinforcement provides high tensile strength due to its high tensile capacity and good bond with concrete. Steel also has a higher elastic modulus, allowing it to resist forces better than concrete alone under the same extension. Cement is a binder that hardens when mixed with water, and can be classified as hydraulic or non-hydraulic. Hydraulic cement can set even when wet or underwater due to additions like fly ash that allow curing in wet conditions. Portland cement is the most common type and consists mainly of tricalcium silicate, dicalcium sil
Design of multistorey building
This document describes the design and analysis of a 15-story residential building. It includes details on loads, materials, and the structural design of key components like slabs, beams, columns, footings, and a water tank. Loads considered include dead loads from structural elements and imposed live loads. Manual analysis is performed using the Kani's method to check the frames. The objectives are to satisfy strength, serviceability, stability, and design the foundation, columns, beams, slab, and water tank. Reinforcement is checked for development length and shear capacity.
Project
This document provides an overview of a project report on designing a multi-storied reinforced concrete building using ETABS software. The objectives are to analyze, design, and detail the structural components of the building. The methodology involves preparing CAD drawings, calculating loads, analyzing the structure, and designing and detailing structural elements. The building to be designed is a residential building with ground + 5 floors located in Chalikkavattom. Loads like dead, live, wind, and seismic loads will be calculated according to Indian codes and applied in the ETABS analysis model.
High rise building
In this ppt I have given a brief history of high rise building. A short narration of Historical Buildings have also been covered.
Design of simple beam using staad pro
The document describes designing a simple beam using STAAD.Pro software. It involves generating the beam geometry, applying loads and supports, analyzing the beam, and designing the beam for concrete. Key steps include assigning the beam properties, applying a fixed support at one end and distributed and point loads, obtaining the loading diagram, shear force and bending moment diagrams, and running the concrete design. The output includes structural drawings, input files, concrete takeoff, and beam design details.
Type of Loads Acting on a Structure/ Building
1) The document introduces different types of structures and loads acting on buildings. It discusses load bearing structures and frame structures.
2) Static loads like dead, live, thermal, and settlement loads are important to consider in design. Dead loads include the weight of structural elements while live loads are movable loads.
3) Dynamic loads that change rapidly must also be accounted for. Wind loads can greatly increase due to a structure's design.
4) Load bearing construction uses thick masonry walls to support the entire building but has limitations around seismic performance and construction efficiency.
Composite structures of steel and concrete
This document provides an introduction and overview of composite structures made of steel and concrete. It discusses beams, slabs, columns, and frames for buildings. Specifically, it covers shear connection between steel and concrete, analysis and design methods, and worked examples for composite slabs, beams, columns, and frames. The design methods presented are based on the Eurocode standards for composite steel-concrete structures.
Engineering Drawing
Engineering drawings are technical drawings used to define requirements for engineered items. There are different types of engineering drawings for different fields like machine drawings, structural drawings, and electrical drawings. Engineering drawings are based on geometric drawings and use various standardized elements like lines, scales, dimensions, projections, and symbols to convey design specifications. The drawings allow designers and manufacturers to communicate ideas and requirements for constructing or manufacturing physical components and systems.
Engineering drawing.edited
This document provides an introduction to engineering drawings. It discusses that engineering drawings are technical drawings used to define requirements for engineered items across various fields, including machines, structures, electronics, and aeronautics. The document outlines different types of lines used in engineering drawings to represent various meanings. It also discusses scales, dimensions, projections including orthographic and perspective, and symbols and icons used in engineering drawings.
More Related Content
What's hot
Design of reinforced concrete beam
This document provides an overview of design in reinforced concrete according to BS 8110. It discusses the basic materials used - concrete and steel reinforcement - and their properties. It describes two limit states for design: ultimate limit state considering failure, and serviceability limit state considering deflection and cracking. Key aspects of beam design are summarized, including types of beams, design for bending and shear resistance, and limiting deflection. Reinforcement detailing rules are also briefly covered. Design examples are provided to illustrate bending and shear design of beams.
Introduction of Reinforced Concrete Design
Introduction of Reinforced Concrte Design, Advantages and DIsadvantages of RC, & Sample Computation of Loads
Staad Pro Intro
This document provides an overview of STAAD Pro structural analysis software. It discusses the history and introduction of STAAD Pro, the types of structures that can be modeled including buildings, staircases, water tanks, shear walls, and steel structures. The document outlines the STAAD Pro work flow including creating geometry, assigning loads and properties, running analyses, designing structures, and creating reports. It also presents some example student projects modeled in STAAD Pro.
staad pro
Structural Analysis And Design is a structural analysis and design software. It includes tools for 3D modeling, analysis, and design of structures according to various international codes. The software was originally developed by Research Engineers International and later acquired by Bentley Systems. It allows engineers to generate models using different elements like frames, plates, and solids. Various types of structures like trusses, planes, and spaces can be modeled and analyzed. The software provides tools for assigning properties, loads, boundary conditions, and performing analysis to calculate member forces and deflections. The results can then be used for structural design of elements like beams, columns, slabs, and foundations.
residential buliding by stadd pro
analysis and design of mutistoried residential building by using staad pro
we considered g+4 residential building
ANYLYSIS AND DESIGN OF HIGH RISE RESIDENTIAL BUILDING BY USING ETABS
copy below Link to view presentation
https://www.slideshare.net/ilavamsikrishna/analysis-and-design-of-high-rise-building-by-using-etabs
vamsiila@gmail.com
Introduction to Building Construction
Building Construction subject is basic subject for understand construction techniques,methods and it is also foundation subject for learn Building Planning & drawing + advance construction technology
The basics of structural engineering
Structural engineering involves relating physical forces to structural elements that resist them. Analysis determines forces in each element of a defined structure, while design configures elements to resist known forces. The process iterates between analysis and design until complete. Structures resist vertical and horizontal loads, and include large items like bridges as well as everyday items. Structural design requires data on the structure type, site conditions like soil properties, and loading conditions from dead and live loads, wind, and earthquakes as defined by codes. Design methods are selected based on local practices.
Design & Analysis of G+2 Residential Building Using STAAD Pro
We have analysed and designed R.C.C building using STAAD Pro consisting of 3 appartments on each floor.
DESIGN OF FLAT SLABS
This document summarizes the key aspects of flat slab construction and design according to Indian code IS 456-2000. It defines flat slabs as slabs that are directly supported by columns without beams, and describes four common types based on whether drops and column heads are used. The main topics covered include guidelines for proportioning slabs and drops, methods for determining bending moments and shear forces, requirements for slab reinforcement, and an example problem demonstrating the design of an interior flat slab panel.
PLANNING AND DESIGN OF G+3 RESIDENTIAL HOUSING COMPLEX (Share By Suman Sau)
The document outlines the planning and design of a G+3 residential housing complex project. It discusses the objectives of designing a 17 unit apartment building with 3 stories using RCC framing. It describes the key elements of the complex like residential buildings, roads, school, and amenities. It also discusses the software used like AutoCAD and STAAD Pro, the methodology of selecting the site, creating master plans and designs, and analyzing the structure. Load cases, design of beams, columns, and slabs are also summarized.
Basic principles of design for rcc building
The document discusses building maintenance, common defects, and remedial methods for RCC structures. It describes three main common defects: foundations, walls, and concrete/RCC frames. For foundations, common issues include differential settlement, uplift of shrinkage soil, and dampness. For walls, issues include cracking, dampness penetration, and failure during cyclones. For concrete frames, common problems discussed are seepage/leakage, spalling of concrete, and corrosion of steel reinforcement. The document provides detailed remedial methods for addressing each of these defects.
MODERN CONSTRUCTION METHODS
The document discusses various modern construction technologies including concrete walls and floors, precast cladding panels, 3D volumetric modules, twin wall technology, flat slabs, thin joint masonry, insulating concrete formwork, and precast concrete foundations. These technologies aim to reduce costs and construction time while improving quality, through the use of prefabricated concrete elements constructed in a controlled factory environment and assembled on site.
Design of steel structures Introduction
Basics of Steel Structures with diagrams of steel building. Introduction about design of connections with bolt, weld
Reinforced cement concrete
Reinforced cement concrete (RCC) uses steel reinforcement within concrete to improve its tensile strength. Concrete is strong under compression but weak under tension. Steel reinforcement provides high tensile strength due to its high tensile capacity and good bond with concrete. Steel also has a higher elastic modulus, allowing it to resist forces better than concrete alone under the same extension. Cement is a binder that hardens when mixed with water, and can be classified as hydraulic or non-hydraulic. Hydraulic cement can set even when wet or underwater due to additions like fly ash that allow curing in wet conditions. Portland cement is the most common type and consists mainly of tricalcium silicate, dicalcium sil
Design of multistorey building
This document describes the design and analysis of a 15-story residential building. It includes details on loads, materials, and the structural design of key components like slabs, beams, columns, footings, and a water tank. Loads considered include dead loads from structural elements and imposed live loads. Manual analysis is performed using the Kani's method to check the frames. The objectives are to satisfy strength, serviceability, stability, and design the foundation, columns, beams, slab, and water tank. Reinforcement is checked for development length and shear capacity.
Project
This document provides an overview of a project report on designing a multi-storied reinforced concrete building using ETABS software. The objectives are to analyze, design, and detail the structural components of the building. The methodology involves preparing CAD drawings, calculating loads, analyzing the structure, and designing and detailing structural elements. The building to be designed is a residential building with ground + 5 floors located in Chalikkavattom. Loads like dead, live, wind, and seismic loads will be calculated according to Indian codes and applied in the ETABS analysis model.
High rise building
In this ppt I have given a brief history of high rise building. A short narration of Historical Buildings have also been covered.
Design of simple beam using staad pro
The document describes designing a simple beam using STAAD.Pro software. It involves generating the beam geometry, applying loads and supports, analyzing the beam, and designing the beam for concrete. Key steps include assigning the beam properties, applying a fixed support at one end and distributed and point loads, obtaining the loading diagram, shear force and bending moment diagrams, and running the concrete design. The output includes structural drawings, input files, concrete takeoff, and beam design details.
Type of Loads Acting on a Structure/ Building
1) The document introduces different types of structures and loads acting on buildings. It discusses load bearing structures and frame structures.
2) Static loads like dead, live, thermal, and settlement loads are important to consider in design. Dead loads include the weight of structural elements while live loads are movable loads.
3) Dynamic loads that change rapidly must also be accounted for. Wind loads can greatly increase due to a structure's design.
4) Load bearing construction uses thick masonry walls to support the entire building but has limitations around seismic performance and construction efficiency.
Composite structures of steel and concrete
This document provides an introduction and overview of composite structures made of steel and concrete. It discusses beams, slabs, columns, and frames for buildings. Specifically, it covers shear connection between steel and concrete, analysis and design methods, and worked examples for composite slabs, beams, columns, and frames. The design methods presented are based on the Eurocode standards for composite steel-concrete structures.
What's hot (20)
Design & Analysis of G+2 Residential Building Using STAAD Pro
Design & Analysis of G+2 Residential Building Using STAAD Pro
PLANNING AND DESIGN OF G+3 RESIDENTIAL HOUSING COMPLEX (Share By Suman Sau)
PLANNING AND DESIGN OF G+3 RESIDENTIAL HOUSING COMPLEX (Share By Suman Sau)
Similar to Importance of structural design
Engineering Drawing
Engineering drawings are technical drawings used to define requirements for engineered items. There are different types of engineering drawings for different fields like machine drawings, structural drawings, and electrical drawings. Engineering drawings are based on geometric drawings and use various standardized elements like lines, scales, dimensions, projections, and symbols to convey design specifications. The drawings allow designers and manufacturers to communicate ideas and requirements for constructing or manufacturing physical components and systems.
Engineering drawing.edited
This document provides an introduction to engineering drawings. It discusses that engineering drawings are technical drawings used to define requirements for engineered items across various fields, including machines, structures, electronics, and aeronautics. The document outlines different types of lines used in engineering drawings to represent various meanings. It also discusses scales, dimensions, projections including orthographic and perspective, and symbols and icons used in engineering drawings.
2nd Leccture C E D & G.pdf
This document provides an introduction to engineering drawings. It explains that engineering drawings are technical drawings used to define engineered items and include views, dimensions, and details. There are specialized drawings for different engineering fields like machine, structural, electrical, and aeronautical drawings. Engineering drawings are based on geometric drawings and are important for communicating designs, analyzing projects, and supporting manufacturing. Key elements in engineering drawings include lines, scales, dimensions, symbols, orientation details, and references. The document also provides an overview of 2D and 3D drawing types.
Engineering drawing
Engineering drawings are technical drawings used to define requirements for engineered items. They contain various views, dimensions, and details. There are different types of engineering drawings for different fields like machine drawings, structural drawings, and electrical drawings. Engineering drawings are based on geometric drawings and are important for communicating design ideas, analyzing designs, stimulating further design, and supporting manufacturing. They contain various elements like lines, scales, dimensions, projections, and symbols to convey important information about an engineering design.
Engineering Drawings
Structural engineering drawings show details of buildings and structures, applying math and science concepts to design stability and sustainability. They communicate designs between teams and archive geometric forms. Engineering drawings are technical and precise, using standardized elements like lines, scales, dimensions, projections, and hatches. They exist in 2D styles like plans, sections and elevations, and 3D styles like orthographic projections and pictorials.
Engineering drawing fnbe 04.14 final
Structural engineering drawings show details of buildings and structures, applying math and science concepts to design stability and sustainability. They communicate designs between teams and archive geometric forms. Engineering drawings are technical and precise, using elements like lines, scales, dimensions, projections, and hatching. They exist in 2D types like plans, sections and elevations, and 3D types like orthographic projections and pictorial drawings.
ITD: Project #01: Structural Engineering Drawings
Structural engineering drawings show details of buildings and structures, applying math and science concepts to design stability and sustainability. They communicate designs between teams and archive geometric forms. Engineering drawings are technical and precise, using standardized elements like lines, scales, dimensions, projections, and hatches. They exist in 2D types like plans, sections and elevations, and 3D types like orthographic projections and pictorial drawings.
Building Drawing(CE3G)- Introduction.ppt
The document discusses various types of drawings used in architectural planning and building construction projects, including:
- Location plans, site plans, and floor plans which show the layout and dimensions of the building and property.
- Elevations which show the exterior surfaces of the building.
- Section drawings which show internal and external construction by cutting through walls and floors.
- Engineering, architectural, technical, shop, and "as-built" drawings which provide specifications for construction elements, fabrication, and recording changes made during construction.
Standard symbols and conventions are used in floor plans, elevations, and sections to clearly convey construction elements and fixtures. Architectural drawings are essential for planning approval and effective coordination between builders and trades.
Working Drawing Building Layout Architectural
The document discusses working drawings for building layout and architectural and structural designs. It provides details on building planning, proportions, orientations, site plans, and working drawings. It explains that working drawings include dimensions and details to guide construction. They consist of 2D projections like plans, sections and elevations, and may include title blocks, dimensions, notations and symbols. The document also defines architectural drawings as technical representations of structures, and structural drawings as plans detailing foundations, framing, beams, columns and wall sections.
CAD Exp 1.pdf
This document provides an overview of engineering drawing concepts and introduces the AutoCAD software. It describes the objectives, equipment, and types of lines used in engineering drawings. It also explains different drawing scales, dimensioning techniques, projection methods including orthographic and isometric projections. The document introduces key AutoCAD interface elements and provides step-by-step instructions for common drawing, editing, and plotting commands in AutoCAD.
CAD Exp 1 (1).pdf
This document provides an overview of engineering drawing concepts and introduces the AutoCAD software. It describes the objectives, equipment, and types of lines used in engineering drawings. It also explains different drawing scales, dimensioning techniques, projection methods including orthographic and isometric projections. The document introduces key AutoCAD interface elements and demonstrates how to create basic shapes and perform common editing commands. It provides step-by-step instructions for printing or plotting completed drawings.
14773 orthographic
Orthographic projections provide 2D views of an object that together accurately represent it. Common views are the front, top, and side. Objects are imagined inside a glass box and each view is a projection of one side unfolded. Dimensions are drawn with thin continuous lines and specify measurements to manufacture the object. Drawings also include title blocks with identifying information like the title, author, date, and scale.
Orthographic Projection
Orthographic projections provide 2D views of an object that together accurately represent it. Common views are the front, top, and side. Objects are imagined inside a glass box and each face is projected onto a plane. Dimensions are drawn with thin continuous lines and indicate sizes. Drawings include title blocks with title, author, date, scale, and other information.
fundamentals of drawing and isometric and orthographic projection
fundamentals of drawing and difference between isometric and orthographic projection. Basic representation principles.
Basics of Engineering Drawing & first angle projection
Engineering drawing first angle projection and third angle projection are being covered. how to represent a drawing on a drawing sheet has covered. How to read multi views has been covered.difference between isometric projection and orthographic projection has been covered. conversion of isometric projection to orthographic projecion and from orthographic projection to isometric projection has been covered.The classification of Engineering Drawings include: Building drawing, Machine drawing, Electrical drawing etc.
Dimensions are indicated on the drawing to define geometric characteristics such as lengths, diameters, radii, angles and locations.A projection is defined as a representation of an object on a two dimensional plane. There are basically three types of projections.
Orthographic projection
Isometric projection
Perspective projectionAll engineering drawings are prepared to some scale. The scale adopted should be the largest possible one.
Full size scale,
Reducing scale and
Enlarging scale.
Full size scale 1:1, Reducing scale 1:2, Enlarging scale 50:1A projection is said to be orthographic, when the point of sight is imagined to be located at infinity, so that the rays of sight are parallel to each other and intersect the plane of projection at right angles to it.Orthographic projection technique can produce either
1. Multiview drawing
that each view show an object in two dimensions.
2. Axonometric drawing
that show all three dimensions of an object in one view.
Orthographic projection technique can produce either
1. Multiview drawing
that each view show an object in two dimensions.
2. Axonometric drawing
that show all three dimensions of an object in one view.
role of engineering drawing
Engineering drawings are a graphical language used to clearly define and communicate designs to interested parties involved in design collaboration, manufacturing, and construction. There are two main types of drawings - artistic drawings and technical drawings, with technical drawings being the preferred method used in engineering fields. The purpose of engineering drawing is to develop the ability to read, produce, and abstract information from drawings and diagrams used in different industries. Main types of engineering drawings include mechanical, electrical, electronics, and civil drawings used in various applications such as manufacturing, construction, aerospace, and more.
Types of construction drawings
Different types of drawings is used in construction such as architectural drawings, structural, electrical, plumbing and finishing drawings
Utilizing Mechanical Drawings in Construction Documentation.
Discover how the utilization of mechanical drawings in construction documentation can enhance the efficiency of your projects.
Mechanical drawings in construction documentation supply highly detailed information concerning the components, measurements, and specifications of the mechanical systems of a building.
This information shows up through the designers, engineers, and contractors regarding how these systems will be installed in the structure.
AutoCAD-Architecture.8367704.powerpoint.pptx
The document discusses AutoCAD and its uses for architectural drafting. It describes tools in AutoCAD for adding and modifying walls, ceilings, stairs, floors, and more. It also discusses the different types of drafters that use AutoCAD, including mechanical, architectural, and electrical drafters. The document then covers topics like CAD designers, where AutoCAD is used, coordinate systems, comparisons between 2D and 3D, mouse functions, AutoCAD commands, and the AutoCAD screen.
Engineering graphics
This document provides information about engineering graphics including drawing instruments, lines, scales, title blocks and sheets. It discusses the various drawing instruments used like the drawing board, mini-drafter, set squares, templates, scales and pencils. It explains the different types of lines used in engineering drawings like visible outlines, dimension lines, extension lines, construction lines, hatching lines, guide lines and hidden lines. It also provides details about scales, title blocks and standard drawing sheet sizes used for engineering drawings.
Similar to Importance of structural design (20)
fundamentals of drawing and isometric and orthographic projection
fundamentals of drawing and isometric and orthographic projection
Basics of Engineering Drawing & first angle projection
Basics of Engineering Drawing & first angle projection
Utilizing Mechanical Drawings in Construction Documentation.
Utilizing Mechanical Drawings in Construction Documentation.
Recently uploaded
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
8328958814Sattamatka.satta.matka.satta matka.kalyan weekly chart.kalyan chart.kalyan jodi chart.kalyan penal chart.kalyan today.kalyan open.fix satta.fix fix fix Satta matka nambar
一比一原版(BC毕业证)波士顿学院毕业证如何办理
BC毕业证学历书【微信95270640】办理波士顿学院毕业证成绩单（Q微信95270640）毕业证学历认证OFFER专卖国外文凭学历学位证书办理澳洲文凭|澳洲毕业证,澳洲学历认证,澳洲成绩单 澳洲offer,教育部学历认证及使馆认证永久可查 ,国外毕业证|国外学历认证,国外学历文凭证书 BC毕业证，BC毕业证，BC毕业证，BC毕业证，BC毕业证，BC毕业证，BC毕业证，专业为留学生办理毕业证、成绩单、使馆留学回国人员证明、教育部学历学位认证、录取通知书、Offer、
专业为留学生办理波士顿学院波士顿学院本科学位证成绩单【100%存档可查】留学全套申请材料办理。本公司承诺所有毕业证成绩单成品全部按照学校原版工艺对照一比一制作和学校一样的羊皮纸张保证您证书的质量！
如果你回国在学历认证方面有以下难题请联系我们我们将竭诚为你解决认证瓶颈
1所有材料真实但资料不全无法提供完全齐整的原件。【如：成绩单丶毕业证丶回国证明等材料中有遗失的。】
2获得真实的国外最终学历学位但国外本科学历就读经历存在问题或缺陷。【如：国外本科是教育部不承认的或者是联合办学项目教育部没有备案的或者外本科没有正常毕业的。】
3学分转移联合办学等情况复杂不知道怎么整理材料的。时间紧迫自己不清楚递交流程的。
如果你是以上情况之一请联系我们我们将在第一时间内给你免费咨询相关信息。我们将帮助你整理认证所需的各种材料.帮你解决国外学历认证难题。
国外波士顿学院波士顿学院本科学位证成绩单办理方法：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询波士顿学院波士顿学院本科学位证成绩单）；
2开始安排制作波士顿学院毕业证成绩单电子图；
3波士顿学院毕业证成绩单电子版做好以后发送给您确认；
4波士顿学院毕业证成绩单电子版您确认信息无误之后安排制作成品；
5波士顿学院成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。疯一把山娃算了算这一次足足花了老爸元够他挣上半个月的山娃很不解一向节俭的父亲啥时变得如此阔绰大方大把大把掏钱时居然连眉头也不皱一下车票早买好了直达卧铺车得经过山娃老家门口山娃拒绝父亲送说往车上一躺就等着下车决无丢失的道理有手机在身联系也方便再说他都岁了还有大半车的小伙伴相伴他不怕在父亲千叮咛万嘱咐中山娃依依不舍地爬上车朝窗外不住地挥手别了父亲别了父亲的城别了我的暑假生活我的城市生活望着窗外挥舞的房
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Matka Guessing Satta Matka Kalyan panel Chart Indian Matka Satta Matta Matka Dpboss KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA ➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
Mr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdf
Mr. Brainwash Beautiful Girl / Mixed Media / signed / Unique
Year: 2023
Format: 96,5 x 127 cm / 37.8 x 50 inch
Material: Fine Art Paper with hand-torn edges.
Method: Mixed Media, Stencil, Spray Paint.
Edition: Unique
Other: handsigned by Mr. Brainwash front and verso.
Beautiful Girl by Mr. Brainwash is a mixed media artwork on paper done in 2023. It is unique and of course signed by Mr. Brainwash. The picture is a tribute to his own most successful work of art, the Balloon Girl. In this new creation, however, the theme of the little girl is slightly modified.
In Mr. Brainwash’s mixed media artwork titled “Beautiful Girl,” we are presented with a captivating depiction of a little girl adorned in a summer dress, with two playful pigtails framing her face. The artwork exudes a sense of innocence and whimsy, as the girl is shown in a dreamy state, lifting one end of her skirt and looking down as if she were about to dance. Through the use of mixed media, Mr. Brainwash skillfully combines different artistic elements to create a visually striking composition. The vibrant colors and bold brushstrokes bring the artwork to life, evoking a sense of joy and happiness. The attention to detail in the girl’s expression and body language adds depth and character to the piece, allowing viewers to connect with the young protagonist on a personal and emotional level. “Beautiful Girl” is a testament to Mr. Brainwash’s unique artistic style, blending elements of street art, pop art, and contemporary art to create a visually captivating and emotionally resonant artwork.
The use of mixed media in “Beautiful Girl” adds an additional layer of complexity to the artwork. By combining different artistic techniques and materials, such as stencils, spray paint, and collage, Mr. Brainwash creates a dynamic and textured composition that grabs the viewer’s attention. The juxtaposition of different textures and patterns adds depth and visual interest to the piece, while also emphasizing the artist’s eclectic and experimental approach to art-making. The inclusion of collage elements, such as newspaper clippings and torn posters, further enhances the artwork’s urban and contemporary feel. Overall, “Beautiful Girl” is a visually captivating and thought-provoking artwork that showcases Mr. Brainwash’s talent for blending different artistic elements to create a truly unique and engaging piece.
Satta matka guessing matka Kalyan chart
SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA RESULT KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA WEBSITE FIX FIX MATKA NUMBER INDIA.S NO1 WEBSITE TTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA FIX FIX MATKA NUMBER FIX MATKANUMBER FIX FIX FIX MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA SATTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA WAPKA.FIX FIX FIX
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka Satta Matta Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKATanjore Painting: Rich Heritage and Intricate Craftsmanship | Cottage9
Explore the exquisite art of Tanjore Painting, known for its vibrant colors, gold foil work, and traditional themes. Discover its cultural significance today!
A Brief Introduction About Hanying Chen_
Vancouver-based artist Hanying Chen boasts extensive skills in writing, directing, producing, and singing, reflecting her diverse talents in the performing arts. As she looks ahead, Hanying is driven to craft a fulfilling career path that harmonizes with her deep passion for artistic expression. In the coming years, she envisions cultivating a balanced life, blending her professional aspirations with her desire to foster meaningful connections in her vibrant urban community.
"Snow" by Ann Beattie illustrated by Aimie Bourgeois
"Snow" by Ann Beattie illustrated into comic by aimie bourgeois
Sattamatka satta matka sattamatka results
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
Satta Matka Satta result marka result Dpboss sattamatka341 satta143 Satta Matka Sattamatka New Mumbai Ratan Satta Matka Fast Matka Milan Market Kalyan Matka Results Satta Game Matka Game Satta Matka Kalyan Satta Matka Mumbai Main Online Matka Results Satta Matka Tips Milan Chart Satta Matka Boss
New Star Day Satta King Live Satta Matka Results Satta Matka Company Indian Matka Satta Matka Kalyan Night Matka
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |➒➌➎➏➑➐➋➑➐➐Dpboss Matka Guessing Satta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKARecently uploaded (20)
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
Dpboss Matka Guessing Satta Matta Matka Kalyan Chart Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Kalyan Matka Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
Mr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdf
Mr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdf
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
Tanjore Painting: Rich Heritage and Intricate Craftsmanship | Cottage9
Tanjore Painting: Rich Heritage and Intricate Craftsmanship | Cottage9
"Snow" by Ann Beattie illustrated by Aimie Bourgeois
"Snow" by Ann Beattie illustrated by Aimie Bourgeois
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA |
Importance of structural design
- 1. WELCOME TO OUR PRESENTATION Importance of Structural Design Presented by Mir Kamrul Islam
- 2. What are Structural Design? Definition: A type of technical drawing that shows details information such as Foundation, Roof, Beams etc. Applies Math and Science concepts design structures, resulting in stability and sustainability of the structure.
- 4. 1. Architect comes out with building layout. Steps:
- 5. 2. The structural engineer fits the structure to the architecture, and decides on what structural systems to use. 3. A general layout is developed. Structural type -Selection of material -Estimation of cost
- 6. 4. The loads are investigated and calculated. 5. Stress Analysis -Maximum capacity of loads -Specifications and codes
- 7. 6. Selection of elements 8. Approval of architect. 9. Submit to authorities for approval. 7. Drawing, Detailing and Specification of Jobs
- 8. 10.Proceed to construction. 11.Amendments of construction drawings. 12.As-built drawings drawn.
- 10. Lines
- 11. Structural Deign are always to scale. 1:100 1:50 1:25 1:10 1:5 Scales Most Common Scales:
- 12. Dimensions Factors to take into consideration: method and line type that is used for dimensioning. The linear dimension would be the overall, auxiliary depiction and the second form of dimensioning would be the diameter and radi of the structure. A mixture of the two would depict the position of ‘The Hole’ in an engineering drawing.
- 14. - Shows the builder and others the required size for every parts of the building. - Unbroken lines. - 2 mm away from the object being dimensioned.
- 15. 2-Dimensional (2D) There are multiple types of 2D Drawing Types in Structural Design. - Plan: ‘Top View’, ‘Floor Plan’ & ‘Roof Plan’ - Sections: ‘Cross-Section’ & ‘Longitudinal Section’ - Elevations: ‘Front Elevation’, ‘Right Elevation’, ‘Left Elevation’ and ‘Rear Elevation’
- 16. 3-Dimensional (3D) 3-Dimensional Design drawings are also known as ‘Production Drawings’ The 3-Dimensional (3D) Drawing Types: - Orthogonal Projections - Pictorial Drawing: Isometric & Oblique - ‘’Working Drawings’’
- 18. Orthographic Projection Orthographic projection drawings are used to describe buildings, structures or objects pictorially. Showed through first and third angle projection.
- 20. Graphical Projection Graphical Projection drawings have two different types: 1) Perspective projection 2) Parallel projection
- 22. Thank you