Ijecet 06 06_006
•
0 likes•225 views
This document describes an Internet of Things (IoT) based greenhouse monitoring system that monitors temperature and soil moisture using sensors. The sensor data is sent over WiFi to a cloud server every 3 hours using MQTT protocol. Users can access the sensor data from anywhere using an internet connection and control greenhouse parameters remotely. The system aims to provide low-cost and flexible monitoring of greenhouse conditions without needing a dedicated server. It demonstrates monitoring temperature and soil moisture to evaluate the feasibility of the IoT-enabled smart greenhouse.
Report
Share
Report
Share
Download to read offline
![IOT based Green House Monitoring System
http://www.iaeme.com/IJECET/index.asp 49 editor@iaeme.com
wherever we have an internet access [4]. This interesting fact throws upon us the need
to implement a solution integrating our present resources. This is where internet of
things comes into the picture. This report focuses on implementing a smart
greenhouse that can monitored using IOT technology.
2. OBJECTIVE
The objective of the project is to implement a miniature model of a smart monitoring
and control system of greenhouses through the internet of things technology.
The proposed project aims at monitoring the various analog parameters like
temperature and soil moisture and send the processed data over a wireless network to
an online broker and analysed in real-time. Moreover it is proposed to enable the end
users control the greenhouse parameters remotely from anywhere in the world.
3. IMPLEMENTATION
The whole idea of smart greenhouse monitoring is accomplished using IOT[1]. The
project provides access to control and monitor vital parameters of the farm through a
network of sensors which forms the lowest nodes of a multi level IOT platform.
The coding started from the TI project example which came as part of the SDK of
CC3200 launch pad. A real time OS called Free RTOS was used to implement the
tasks as the project involved WLAN, http server, socket programming over TCP/IP
for MQTT [1]. Without an OS this would have been difficult to manage these tasks.
Initially the board and the needed peripherals were initialised and two tasks were
created for device configuration and data publishing/subscription. The TI support
forums on CC32XX devices was extremely useful to overcome the issues that came
up during coding.
Paho Embedded C [2, 3, 5] client gave us the necessary support to integrate
MQTT protocol into this project. Using this could send packets every 3 hours to the
cloud server and it was verified using MQTT lens chrome application. This
application enables users to subscribe to a particular topic or publish data to a
particular topic. The same device configuration page of CC3200 which was loaded
into serial flash was used for configuring the device initially [1].
Device reads the soil moisture in fixed intervals of time (in every 3 hours), and
sends the data over a Wi-Fi network [2] through the gateway to the cloud application.
Device supports sending the soil moisture data when it is requested from the cloud
application to the end device. Device will get 1024 samples from the sensor when the
request is given. Among 1024 samples the average value (simple arithmetic –
average) and will be passed to the gateway for cloud application update.
The idea of soil moisture sensing [3] is that, when the soil is wet, more current
flows between the two electrodes and consequently the resistance will be low. When
the soil is dry the current flow is less and hence resistance is more. Resistance
variation largely depends upon the exposed area of the electrode surface. The
moisture sensors reads the soil moisture in fixed intervals of time (in every 3 hours),
and sends the data over a Wi-Fi network through the gateway to the cloud application.
Device supports sending the soil moisture data when it is requested from the cloud
application to the end device. Device will get 1024 samples from the sensor when the
request is given. The average value (simple arithmetic – average) of these 1024
samples is calculated. This is to account for the noise that is generated in the circuitry.
These values are passed to the gateway for cloud application update. The greenhouse](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
The development of supervisory system for electricity control in smgg, guntur...
Abstract The main intention of the paper is to build a prototype model, for to supervise the electricity control and monitoring for the purpose of ease of operation, power saving, man power reduction. The paper may also aimed for to help society, how to build application oriented designs for the purpose of human need to simplify the lifes using open source hardware and software tools. The worlds knows the scarcity of power. So many techniques available to monitor and control. But how the paper is new? The reason is this, the paper is developed completely using open source hardware and software which follows laws of lumped matter approaches and fundamental physics rules. The SCADA software price in multiples of thousands in Indian rupees. The authors developed SCADA software using open source tools. The SCADA software interact with the hardware in real time. The authors proposed method of approach is much simpler and economical. The authors developed prototype model to apply in St.Marrys Group of Institutions, Guntur, Ap, India. The paper is developed in following manner, 1) Problem identification in organization, 2) Practical concept development and mathematical supplementary work 3) Flow chart of working mechanism and architectural development 4) Hardware & Software development according to Architecture.5) And finally results and discussion. The word SCADA in long form Supervisory Control and Data Acquisition. The paper combined so many fields of engineering and physical sciences by name Sensor technology , System On chip, Microcontrollers, Electromagnetism, software application development. The entire electrification routing in the organization is connected to SCADA Software in serial connection with centralized Personal Computer. The sensors are interfaced in server rooms which are monitoring room critical temperature. If temperature sensors feeds the data to SCADA, if the readings are out of range, the AC will ON by observer. In the same manner power control will be takes place. Keywords: SCADA, Open source, Hardware, Software, Mathematics, Electricity, Monitoring. Etc.
Submitted
The document presents a project on microcontroller based home automation using a PC. It aims to develop a low cost, reliable and scalable home automation system that allows controlling household appliances remotely via a PC and microcontroller. The system uses a PIC microcontroller connected to a PC through a MAX232 level shifter. Relays are used to control appliances and are driven by a ULN2003 relay driver. The PC sends control signals to the microcontroller using a VB GUI interface. This allows remotely switching appliances on/off from the PC. A literature review compares different home automation techniques. The project details hardware and software components, circuit diagram, workflow and concludes with potential applications and scope for improvement.
IRJET- Fish Recognition and Detection Based on Deep Learning
The document describes a method for fish recognition and detection using deep learning and the R-CNN algorithm. A raspberry pi camera is used to capture underwater images of fish as input datasets. These images are preprocessed using techniques like resizing and background removal. The preprocessed datasets are then trained using the R-CNN deep learning model. This trained model can detect and recognize fish in the images with 85% accuracy. The detected results are stored in an IoT cloud for further use. The proposed method provides high accuracy for fish detection with minimal human intervention.
IRJET-Experimental Investigation on the Effect of TiO2 Particles on Mortars
This document describes a proposed system to monitor patient body temperature using IoT and a microservices architecture. An Arduino device with temperature sensor would collect body temperature data and send it over WiFi to a cloud system. The cloud system would use a microservices architecture with three main services: 1) an API to receive temperature data, 2) a queue to store incoming data, and 3) a computation service to analyze data for anomalies and send alerts. The system is designed to be horizontally scalable and fault tolerant to reliably process large amounts of patient monitoring data.
Greenhouse Environment Monitoring and Controlling System Using Arduino Platform
This is the project about "Greenhouse Environment Monitoring and Controlling System Using Arduino Platform".
Web Server Based Solar Parameters Monitoring using Arduino
Nowadays renewable energy systems are becoming best way to generate electricity. With advancement of technologies the cost of renewable energy equipment is going down globally encouraging large scale solar photovoltaic installations. Major part of renewable energy is solar energy. The implementation of new cost effective methodology based on technology to monitor a solar parameters for performance evaluation using open source tools and resources like Arduino and local Web Server which provides data on Web to monitor the parameters. Local Web provides all services for free of cost and monitoring can saves lot of investment on Web designing and maintenance. This focus on low cost system with easy interface so that common people who installs roof top solar plants also monitors easily without depending on service providing companies. This will facilitate preventive maintenance, fault detection of the solar panel in addition to real time monitoring. This research details the development of an open source device to monitoring system for remote solar panel systems. Nyan Phyo Aung | Mo Mo Myint Wai | Lwin Lwin Htay | Kyawt Kyawt San "Web Server Based Solar Parameters Monitoring using Arduino" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25249.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25249/web-server-based-solar-parameters-monitoring-using-arduino/nyan-phyo-aung
IoT based temperature and humidity monitoring framework
This study explored the use of Internet of Things (IoT) in monitoring the temperature and humidity of a data centre in real-time using a simple monitoring system to determine the relationship and difference between temperature and humidity with respect to the different locations of measurements. The development of temperature and humidity monitoring system was accomplished using the proposed framework and has been deployed at the data centre of Politeknik Muadzam Shah, where the readings were recorded and sent to an IoT platform of AT&T M2X to be stored. The data was then retrieved and analysed showing that there was a significant difference in temperature and humidity measured at different locations. X The monitoring system was also successful in detecting extreme changes in temperature and humidity and automatically send a notification to IT personnel via e-mail, short messaging service (SMS) and mobile push notification for further action.
Hazard object reporting to respective authorities
This document describes a proposed mobile application that would allow users to report hazardous objects to the appropriate authorities. The application would use the device's GPS to tag photos, videos, or audio recordings with location data. This media would then be uploaded to a central server and displayed on a map for relevant government departments to view. The goal is to create a single platform for citizens to report issues and hazards, so authorities can better understand problems and locations that require attention. Key features would include media capture, GPS integration, and displaying reported incidents on a map via the Google Maps API.
Recommended
The development of supervisory system for electricity control in smgg, guntur...
Abstract The main intention of the paper is to build a prototype model, for to supervise the electricity control and monitoring for the purpose of ease of operation, power saving, man power reduction. The paper may also aimed for to help society, how to build application oriented designs for the purpose of human need to simplify the lifes using open source hardware and software tools. The worlds knows the scarcity of power. So many techniques available to monitor and control. But how the paper is new? The reason is this, the paper is developed completely using open source hardware and software which follows laws of lumped matter approaches and fundamental physics rules. The SCADA software price in multiples of thousands in Indian rupees. The authors developed SCADA software using open source tools. The SCADA software interact with the hardware in real time. The authors proposed method of approach is much simpler and economical. The authors developed prototype model to apply in St.Marrys Group of Institutions, Guntur, Ap, India. The paper is developed in following manner, 1) Problem identification in organization, 2) Practical concept development and mathematical supplementary work 3) Flow chart of working mechanism and architectural development 4) Hardware & Software development according to Architecture.5) And finally results and discussion. The word SCADA in long form Supervisory Control and Data Acquisition. The paper combined so many fields of engineering and physical sciences by name Sensor technology , System On chip, Microcontrollers, Electromagnetism, software application development. The entire electrification routing in the organization is connected to SCADA Software in serial connection with centralized Personal Computer. The sensors are interfaced in server rooms which are monitoring room critical temperature. If temperature sensors feeds the data to SCADA, if the readings are out of range, the AC will ON by observer. In the same manner power control will be takes place. Keywords: SCADA, Open source, Hardware, Software, Mathematics, Electricity, Monitoring. Etc.
Submitted
The document presents a project on microcontroller based home automation using a PC. It aims to develop a low cost, reliable and scalable home automation system that allows controlling household appliances remotely via a PC and microcontroller. The system uses a PIC microcontroller connected to a PC through a MAX232 level shifter. Relays are used to control appliances and are driven by a ULN2003 relay driver. The PC sends control signals to the microcontroller using a VB GUI interface. This allows remotely switching appliances on/off from the PC. A literature review compares different home automation techniques. The project details hardware and software components, circuit diagram, workflow and concludes with potential applications and scope for improvement.
IRJET- Fish Recognition and Detection Based on Deep Learning
The document describes a method for fish recognition and detection using deep learning and the R-CNN algorithm. A raspberry pi camera is used to capture underwater images of fish as input datasets. These images are preprocessed using techniques like resizing and background removal. The preprocessed datasets are then trained using the R-CNN deep learning model. This trained model can detect and recognize fish in the images with 85% accuracy. The detected results are stored in an IoT cloud for further use. The proposed method provides high accuracy for fish detection with minimal human intervention.
IRJET-Experimental Investigation on the Effect of TiO2 Particles on Mortars
This document describes a proposed system to monitor patient body temperature using IoT and a microservices architecture. An Arduino device with temperature sensor would collect body temperature data and send it over WiFi to a cloud system. The cloud system would use a microservices architecture with three main services: 1) an API to receive temperature data, 2) a queue to store incoming data, and 3) a computation service to analyze data for anomalies and send alerts. The system is designed to be horizontally scalable and fault tolerant to reliably process large amounts of patient monitoring data.
Greenhouse Environment Monitoring and Controlling System Using Arduino Platform
This is the project about "Greenhouse Environment Monitoring and Controlling System Using Arduino Platform".
Web Server Based Solar Parameters Monitoring using Arduino
Nowadays renewable energy systems are becoming best way to generate electricity. With advancement of technologies the cost of renewable energy equipment is going down globally encouraging large scale solar photovoltaic installations. Major part of renewable energy is solar energy. The implementation of new cost effective methodology based on technology to monitor a solar parameters for performance evaluation using open source tools and resources like Arduino and local Web Server which provides data on Web to monitor the parameters. Local Web provides all services for free of cost and monitoring can saves lot of investment on Web designing and maintenance. This focus on low cost system with easy interface so that common people who installs roof top solar plants also monitors easily without depending on service providing companies. This will facilitate preventive maintenance, fault detection of the solar panel in addition to real time monitoring. This research details the development of an open source device to monitoring system for remote solar panel systems. Nyan Phyo Aung | Mo Mo Myint Wai | Lwin Lwin Htay | Kyawt Kyawt San "Web Server Based Solar Parameters Monitoring using Arduino" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25249.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25249/web-server-based-solar-parameters-monitoring-using-arduino/nyan-phyo-aung
IoT based temperature and humidity monitoring framework
This study explored the use of Internet of Things (IoT) in monitoring the temperature and humidity of a data centre in real-time using a simple monitoring system to determine the relationship and difference between temperature and humidity with respect to the different locations of measurements. The development of temperature and humidity monitoring system was accomplished using the proposed framework and has been deployed at the data centre of Politeknik Muadzam Shah, where the readings were recorded and sent to an IoT platform of AT&T M2X to be stored. The data was then retrieved and analysed showing that there was a significant difference in temperature and humidity measured at different locations. X The monitoring system was also successful in detecting extreme changes in temperature and humidity and automatically send a notification to IT personnel via e-mail, short messaging service (SMS) and mobile push notification for further action.
Hazard object reporting to respective authorities
This document describes a proposed mobile application that would allow users to report hazardous objects to the appropriate authorities. The application would use the device's GPS to tag photos, videos, or audio recordings with location data. This media would then be uploaded to a central server and displayed on a map for relevant government departments to view. The goal is to create a single platform for citizens to report issues and hazards, so authorities can better understand problems and locations that require attention. Key features would include media capture, GPS integration, and displaying reported incidents on a map via the Google Maps API.
IRJET-Intelligent Farms
This document describes an intelligent farm system that uses IoT technologies like wireless sensor networks, cloud computing, and data mining to help farmers remotely monitor and control operations on their farms. Sensors placed throughout the farm collect environmental data like soil moisture, temperature, and humidity. This data is sent to the cloud for analysis. Data mining algorithms generate predictions about things like optimal water and pesticide levels. Farmers receive notifications on an Android app with suggestions based on the predictions. This allows farmers to remotely control irrigation and pesticide spraying systems according to the data-driven recommendations, reducing the need for frequent farm visits and helping with efficient resource management.
Integrating Wireless Sensor Network into Cloud Services for Real-time Data Co...
Integrating Wireless Sensor Network into Cloud Services for Real-time Data Co...Mokpo National University
This document summarizes a presentation given by Rajeev Piyare on integrating wireless sensor networks with cloud services for real-time data collection. Piyare proposed an architecture with three layers - a sensor layer to collect data, a coordinator layer to manage data, and a supervision layer in the cloud to store data and provide interfaces. He demonstrated collecting temperature and voltage readings and accessing the data through RESTful web services. The system alerts users when sensor values exceed thresholds, with average notification times of 11 seconds. Experiments showed the impact of packet size and sleep cycles on battery lifetime for battery-powered sensors. The presentation concluded the architecture provides a flexible way to integrate sensor networks with cloud computing.Ubiquitous Home Control and Monitoring System Using Internet of Things
This document presents a ubiquitous home control and monitoring system using the Internet of Things. The proposed system uses an Android app and 8051 microcontroller-based web server to control and monitor home appliances like fans, lights and security systems from any internet-connected device. Sensors monitor temperature, humidity and current in the home. The system architecture includes a remote environment for control via an Android app, a home gateway with the 8051 microcontroller web server, and home devices. This allows convenient and efficient home control from anywhere to increase comfort, security and quality of life while reducing costs.
An Efficient VLSI Design of AES Cryptography Based on DNA TRNG Design
This document describes an efficient VLSI design for AES cryptography using a true random number generator (TRNG) and DNA encoding. It aims to improve security and reduce area and delay compared to standard AES. The design generates random round keys using a TRNG instead of the standard key expansion process. It further encodes a partial key from the TRNG using DNA encoding to produce the full 128-bit key, strengthening security. Simulation and synthesis results show the TRNG-based AES has lower area and delay than standard AES. Combining the TRNG with DNA encoding further optimizes the design.
Gsm based patient monitoring system in nicu
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
IRJET- Greensworth: A Step Towards Smart Cultivation
This document describes a mobile app called GreensWorth that aims to help crop growers through various smart cultivation features. The app includes disease detection using convolutional neural networks to identify plant diseases from images. It also uses decision tree regression for weather prediction based on multiple weather attributes. Additionally, the app provides a crops guide, disease library, and global community forum to help users with cultivation expertise and advice. The developers believe the comprehensive guidance from these tools will encourage more interest in gardening and agriculture.
Techniques to Apply Artificial Intelligence in Power Plants
In todays world, we are experiencing tremendous growth in the research and application of Artificial intelligence. Power plants are a vast sector where there is a scope of using AI to rectify the faults and optimize the overall running of the plants. The use of AI will help in reducing human dependence, and during a breakdown, will assist in rectifying the problem by determining the cause quickly. This paper focusses on proposing numerous methods to implement AI in various power plants and how it will help in the same. Anshika Gupta "Techniques to Apply Artificial Intelligence in Power Plants" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33050.pdf Paper Url :https://www.ijtsrd.com/engineering/information-technology/33050/techniques-to-apply-artificial-intelligence-in-power-plants/anshika-gupta
IRJET- Health Monitoring System using IoT using Arduino Uno Microcontroller
This document summarizes a research paper on a health monitoring system using IoT and Arduino Uno. The system measures body temperature and pulse rate using sensors interfaced with an Arduino board. Wireless data transmission is done through an ESP8266 WiFi module to an IoT platform called ThingSpeak. The collected sensor data is stored on the ThingSpeak server and can be viewed by authorized users. The system aims to provide easy and affordable health monitoring to address issues like lack of resources and doctors in rural areas. It reduces the time and cost of regular health checkups.
Home Automation using Wi-Fi Interconnection
This document describes a home automation system that uses Wi-Fi technology for wireless communication and control of devices. An Android application is developed to allow users to remotely control and monitor home appliances connected to Arduino boards. The system uses ESP8266 Wi-Fi modules connected to sensors and devices to communicate wirelessly with the Android app over Wi-Fi. This provides a faster and more convenient home automation solution compared to traditional wired systems. The system is aimed at helping elderly and disabled individuals control home devices independently.
IOT Personal Weather Station
This document describes the development of a personal weather station using an Internet of Things (IoT) approach. A BME280 sensor is used to measure temperature, humidity, and pressure. An ESP8266 NodeMCU microcontroller connects to WiFi and creates a web server. When a device requests the web server, the ESP8266 reads the BME280 sensor values and transmits the weather data to the device's browser. The system is intended to provide environmental condition monitoring for agricultural applications such as irrigation scheduling. By automating weather monitoring, farmers can better manage their fields and improve productivity. The low-cost IoT weather station is implemented using the Arduino IDE and ThingSpeak cloud platform to make the weather data remotely
IRJET- Smart Dustbin Container using IoT Notification
This document describes a smart dustbin system that uses IoT technology to notify the proper authorities when garbage bins are nearly full. An ultrasonic sensor detects the fill level of the dustbin and an ESP8266 WiFi module sends this data via the internet. When a bin reaches 70% capacity, an SMS alert is sent using a GSM module. This helps waste collection trucks only service bins that need emptying, saving time, fuel and reducing pollution. The system aims to improve waste management and support initiatives for smart cities.
TE_comp_Seminar_format.pdf
This document describes a seminar report on a smart energy efficient home automation system using IoT. The system aims to remotely control home appliances from anywhere using an internet connection to reduce electricity bills and provide safety and security. It proposes using technologies like NodeMCU, IFTTT, Arduino and Google Assistant to operate devices via voice commands or a web interface. The report includes sections on the system framework, architecture, applications used and concludes that the system can make homes more intelligent and efficient while saving energy costs.
IRJET- Warehouse Management using Iot
This document discusses a proposed system for warehouse management using IoT. The system would use sensors like DHT11 (for temperature and humidity), a flame detector, and an ADXL335 accelerometer to continuously monitor the environment in a warehouse for factors like temperature, moisture, fire, and earthquakes. If any emergency events are detected, such as a fire or earthquake, the system would send alert messages via GSM to notify warehouse officials, emergency services, and hospitals so they can respond quickly. The system aims to automate environmental monitoring and alerting to improve safety and efficiency over manual methods, while using low-cost, low-power components suitable for rural areas.
A Survey on Solar Based Smart Antibiotic Sprinkler System Using Internet of T...
1. The document describes a solar-powered smart sprinkler system using IoT that monitors soil moisture levels and controls watering remotely.
2. It uses a soil moisture sensor connected to a sprinkler and WiFi module to automate watering based on moisture readings. An app allows remote monitoring and control of the system.
3. The system aims to reduce overuse of water and fertilizers for agriculture by precisely watering only when needed, lowering costs and environmental impact compared to traditional sprinklers.
Implementation of IoT in Agriculture: A Scientific Approach for Smart Irriga...
This document describes an IoT-based smart irrigation prototype that was designed and implemented. The prototype automatically turns a motor pump on and off based on soil moisture levels, taking into account temperature and humidity. It uses an ESP32 microcontroller connected to DHT11 and moisture sensors. The data is sent to the Arduino IoT cloud via MQTT protocol and can be accessed worldwide. Test data from the prototype over the cloud and locally is presented. The document also provides background on IoT architectures and protocols, and discusses related work on smart agriculture applications using IoT and machine learning.
IRJET- IoT based Classroom Automation System
This document describes an IoT-based classroom automation system that allows teachers to remotely control devices in the classroom using a mobile application. The system uses NodeMCU microcontrollers connected to sensors and appliances via relays to enable on/off control. An ultrasonic sensor detects human presence. Commands sent from the mobile app via WiFi are received by the NodeMCU which controls the relays. This allows automation of lighting, A/C, and other devices for improved energy efficiency, convenience and security while providing remote classroom monitoring capabilities.
A Review Paper on Emerging Areas and Applications of IoT
This document reviews emerging areas and applications of the Internet of Things (IoT). It discusses what IoT is and how it is used to automate business processes across industries. Key points include:
- IoT involves connecting physical devices with software/sensors to enable data collection and sharing. This has revolutionized businesses by automating tasks and providing insights.
- Common IoT applications discussed are biomedical (remote patient monitoring, real-time monitoring), mechanical (predictive maintenance), agriculture, automobiles (real-time monitoring, emergency alerts), energy, and traffic regulation.
- The IoT architecture described includes devices, an internet gateway for data preprocessing, edge/fog computing for rapid analysis, and
Digital Thermoximeter Using IOT
This document describes a digital thermo-oximeter system that monitors patients' vital signs like temperature, pulse rate, and blood oxygen levels using sensors. The system collects data using sensors connected to a Raspberry Pi microcontroller. The Raspberry Pi then sends the health data to an online platform called ThingsBoard using WiFi. Doctors can monitor patients' conditions in real-time through this online platform without direct contact. The system aims to help doctors efficiently monitor multiple patients, especially during emergencies like the COVID-19 pandemic. It reduces costs and resources needed for direct in-person care while still providing live health insights.
Solar Powered Smart Agriculture Systems Using WSN Via IoT
The document describes a proposed solar-powered smart agriculture system using wireless sensor networks and the Internet of Things. Sensors would monitor soil moisture, water level, humidity, temperature, and other crop/field conditions. A NodeMCU microcontroller would collect sensor data and send it via the cloud to a mobile app for farmers to monitor in real-time. This would help farmers optimize crop yields, efficiency, and reduce stress on farmers by automating some agriculture tasks. The system is intended to advance smart agriculture using renewable energy and modern technologies.
IRJET- Home Automation using IoT: Review
This document summarizes research on using Internet of Things (IoT) technology for home automation and security. It discusses how IoT allows devices in the home to be controlled remotely through a smartphone app and can automate tasks. The document also reviews different approaches others have taken to implement smart home security systems using sensors and microcontrollers connected to the Internet. It describes the typical architecture of an IoT system including sensor, network, and application layers. Finally, it summarizes several research papers on developing smart home and kitchen monitoring systems using technologies like Arduino, Raspberry Pi, and sensors for functions like detecting fires, gas leaks, and intruders.
IRJET- Solar Power Monitoring System using IoT
This document describes a solar power monitoring system using IoT technology. The system uses an ATmega 328 microcontroller to monitor the voltage, current and power output of solar panels. It then transmits this data wirelessly to an IoT platform called Thingspeak using an ESP8266 WiFi module. On Thingspeak, the data can be analyzed to monitor the solar plant's performance over time and detect any faults. This allows remote monitoring of solar plants from any location over the internet for improved maintenance and efficiency.
Internet of things-based photovoltaics parameter monitoring system using Node...
The use of the internet of things (IoT) in solar photovoltaic (PV) systems is a critical feature for remote monitoring, supervising, and performance evaluation. Furthermore, it improves the long-term viability, consistency, efficiency, and system maintenance of energy production. However, previous researchers' proposed PV monitoring systems are relatively complex and expensive. Furthermore, the existing systems do not have any backup data, which means that the acquired data could be lost if the network connection fails. This paper presents a simple and low-cost IoT-based PV parameter monitoring system, with additional backup data stored on a microSD card. A NodeMCU ESP8266 development board is chosen as the main controller because it is a system-on-chip (SOC) microcontroller with integrated Wi-Fi and low-power support, all in one chip to reduce the cost of the proposed system. The solar irradiance, ambient temperature, PV output voltage and PV output current, are measured with photo-diodes, DHT22, impedance dividers and ACS712. While, the PV output power is a product of the PV voltage and PV current. ThingSpeak, an opensource software, is used as a cloud database and data monitoring tool in the form of interactive graphics. The results showed that the system was designed to be highly accurate, reliable, simple to use, and low-cost.
More Related Content
What's hot
IRJET-Intelligent Farms
This document describes an intelligent farm system that uses IoT technologies like wireless sensor networks, cloud computing, and data mining to help farmers remotely monitor and control operations on their farms. Sensors placed throughout the farm collect environmental data like soil moisture, temperature, and humidity. This data is sent to the cloud for analysis. Data mining algorithms generate predictions about things like optimal water and pesticide levels. Farmers receive notifications on an Android app with suggestions based on the predictions. This allows farmers to remotely control irrigation and pesticide spraying systems according to the data-driven recommendations, reducing the need for frequent farm visits and helping with efficient resource management.
Integrating Wireless Sensor Network into Cloud Services for Real-time Data Co...
Integrating Wireless Sensor Network into Cloud Services for Real-time Data Co...Mokpo National University
This document summarizes a presentation given by Rajeev Piyare on integrating wireless sensor networks with cloud services for real-time data collection. Piyare proposed an architecture with three layers - a sensor layer to collect data, a coordinator layer to manage data, and a supervision layer in the cloud to store data and provide interfaces. He demonstrated collecting temperature and voltage readings and accessing the data through RESTful web services. The system alerts users when sensor values exceed thresholds, with average notification times of 11 seconds. Experiments showed the impact of packet size and sleep cycles on battery lifetime for battery-powered sensors. The presentation concluded the architecture provides a flexible way to integrate sensor networks with cloud computing.Ubiquitous Home Control and Monitoring System Using Internet of Things
This document presents a ubiquitous home control and monitoring system using the Internet of Things. The proposed system uses an Android app and 8051 microcontroller-based web server to control and monitor home appliances like fans, lights and security systems from any internet-connected device. Sensors monitor temperature, humidity and current in the home. The system architecture includes a remote environment for control via an Android app, a home gateway with the 8051 microcontroller web server, and home devices. This allows convenient and efficient home control from anywhere to increase comfort, security and quality of life while reducing costs.
An Efficient VLSI Design of AES Cryptography Based on DNA TRNG Design
This document describes an efficient VLSI design for AES cryptography using a true random number generator (TRNG) and DNA encoding. It aims to improve security and reduce area and delay compared to standard AES. The design generates random round keys using a TRNG instead of the standard key expansion process. It further encodes a partial key from the TRNG using DNA encoding to produce the full 128-bit key, strengthening security. Simulation and synthesis results show the TRNG-based AES has lower area and delay than standard AES. Combining the TRNG with DNA encoding further optimizes the design.
Gsm based patient monitoring system in nicu
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
IRJET- Greensworth: A Step Towards Smart Cultivation
This document describes a mobile app called GreensWorth that aims to help crop growers through various smart cultivation features. The app includes disease detection using convolutional neural networks to identify plant diseases from images. It also uses decision tree regression for weather prediction based on multiple weather attributes. Additionally, the app provides a crops guide, disease library, and global community forum to help users with cultivation expertise and advice. The developers believe the comprehensive guidance from these tools will encourage more interest in gardening and agriculture.
Techniques to Apply Artificial Intelligence in Power Plants
In todays world, we are experiencing tremendous growth in the research and application of Artificial intelligence. Power plants are a vast sector where there is a scope of using AI to rectify the faults and optimize the overall running of the plants. The use of AI will help in reducing human dependence, and during a breakdown, will assist in rectifying the problem by determining the cause quickly. This paper focusses on proposing numerous methods to implement AI in various power plants and how it will help in the same. Anshika Gupta "Techniques to Apply Artificial Intelligence in Power Plants" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd33050.pdf Paper Url :https://www.ijtsrd.com/engineering/information-technology/33050/techniques-to-apply-artificial-intelligence-in-power-plants/anshika-gupta
IRJET- Health Monitoring System using IoT using Arduino Uno Microcontroller
This document summarizes a research paper on a health monitoring system using IoT and Arduino Uno. The system measures body temperature and pulse rate using sensors interfaced with an Arduino board. Wireless data transmission is done through an ESP8266 WiFi module to an IoT platform called ThingSpeak. The collected sensor data is stored on the ThingSpeak server and can be viewed by authorized users. The system aims to provide easy and affordable health monitoring to address issues like lack of resources and doctors in rural areas. It reduces the time and cost of regular health checkups.
Home Automation using Wi-Fi Interconnection
This document describes a home automation system that uses Wi-Fi technology for wireless communication and control of devices. An Android application is developed to allow users to remotely control and monitor home appliances connected to Arduino boards. The system uses ESP8266 Wi-Fi modules connected to sensors and devices to communicate wirelessly with the Android app over Wi-Fi. This provides a faster and more convenient home automation solution compared to traditional wired systems. The system is aimed at helping elderly and disabled individuals control home devices independently.
What's hot (9)
Integrating Wireless Sensor Network into Cloud Services for Real-time Data Co...
Integrating Wireless Sensor Network into Cloud Services for Real-time Data Co...
Ubiquitous Home Control and Monitoring System Using Internet of Things
Ubiquitous Home Control and Monitoring System Using Internet of Things
An Efficient VLSI Design of AES Cryptography Based on DNA TRNG Design
An Efficient VLSI Design of AES Cryptography Based on DNA TRNG Design
IRJET- Greensworth: A Step Towards Smart Cultivation
IRJET- Greensworth: A Step Towards Smart Cultivation
Techniques to Apply Artificial Intelligence in Power Plants
Techniques to Apply Artificial Intelligence in Power Plants
IRJET- Health Monitoring System using IoT using Arduino Uno Microcontroller
IRJET- Health Monitoring System using IoT using Arduino Uno Microcontroller
Similar to Ijecet 06 06_006
IOT Personal Weather Station
This document describes the development of a personal weather station using an Internet of Things (IoT) approach. A BME280 sensor is used to measure temperature, humidity, and pressure. An ESP8266 NodeMCU microcontroller connects to WiFi and creates a web server. When a device requests the web server, the ESP8266 reads the BME280 sensor values and transmits the weather data to the device's browser. The system is intended to provide environmental condition monitoring for agricultural applications such as irrigation scheduling. By automating weather monitoring, farmers can better manage their fields and improve productivity. The low-cost IoT weather station is implemented using the Arduino IDE and ThingSpeak cloud platform to make the weather data remotely
IRJET- Smart Dustbin Container using IoT Notification
This document describes a smart dustbin system that uses IoT technology to notify the proper authorities when garbage bins are nearly full. An ultrasonic sensor detects the fill level of the dustbin and an ESP8266 WiFi module sends this data via the internet. When a bin reaches 70% capacity, an SMS alert is sent using a GSM module. This helps waste collection trucks only service bins that need emptying, saving time, fuel and reducing pollution. The system aims to improve waste management and support initiatives for smart cities.
TE_comp_Seminar_format.pdf
This document describes a seminar report on a smart energy efficient home automation system using IoT. The system aims to remotely control home appliances from anywhere using an internet connection to reduce electricity bills and provide safety and security. It proposes using technologies like NodeMCU, IFTTT, Arduino and Google Assistant to operate devices via voice commands or a web interface. The report includes sections on the system framework, architecture, applications used and concludes that the system can make homes more intelligent and efficient while saving energy costs.
IRJET- Warehouse Management using Iot
This document discusses a proposed system for warehouse management using IoT. The system would use sensors like DHT11 (for temperature and humidity), a flame detector, and an ADXL335 accelerometer to continuously monitor the environment in a warehouse for factors like temperature, moisture, fire, and earthquakes. If any emergency events are detected, such as a fire or earthquake, the system would send alert messages via GSM to notify warehouse officials, emergency services, and hospitals so they can respond quickly. The system aims to automate environmental monitoring and alerting to improve safety and efficiency over manual methods, while using low-cost, low-power components suitable for rural areas.
A Survey on Solar Based Smart Antibiotic Sprinkler System Using Internet of T...
1. The document describes a solar-powered smart sprinkler system using IoT that monitors soil moisture levels and controls watering remotely.
2. It uses a soil moisture sensor connected to a sprinkler and WiFi module to automate watering based on moisture readings. An app allows remote monitoring and control of the system.
3. The system aims to reduce overuse of water and fertilizers for agriculture by precisely watering only when needed, lowering costs and environmental impact compared to traditional sprinklers.
Implementation of IoT in Agriculture: A Scientific Approach for Smart Irriga...
This document describes an IoT-based smart irrigation prototype that was designed and implemented. The prototype automatically turns a motor pump on and off based on soil moisture levels, taking into account temperature and humidity. It uses an ESP32 microcontroller connected to DHT11 and moisture sensors. The data is sent to the Arduino IoT cloud via MQTT protocol and can be accessed worldwide. Test data from the prototype over the cloud and locally is presented. The document also provides background on IoT architectures and protocols, and discusses related work on smart agriculture applications using IoT and machine learning.
IRJET- IoT based Classroom Automation System
This document describes an IoT-based classroom automation system that allows teachers to remotely control devices in the classroom using a mobile application. The system uses NodeMCU microcontrollers connected to sensors and appliances via relays to enable on/off control. An ultrasonic sensor detects human presence. Commands sent from the mobile app via WiFi are received by the NodeMCU which controls the relays. This allows automation of lighting, A/C, and other devices for improved energy efficiency, convenience and security while providing remote classroom monitoring capabilities.
A Review Paper on Emerging Areas and Applications of IoT
This document reviews emerging areas and applications of the Internet of Things (IoT). It discusses what IoT is and how it is used to automate business processes across industries. Key points include:
- IoT involves connecting physical devices with software/sensors to enable data collection and sharing. This has revolutionized businesses by automating tasks and providing insights.
- Common IoT applications discussed are biomedical (remote patient monitoring, real-time monitoring), mechanical (predictive maintenance), agriculture, automobiles (real-time monitoring, emergency alerts), energy, and traffic regulation.
- The IoT architecture described includes devices, an internet gateway for data preprocessing, edge/fog computing for rapid analysis, and
Digital Thermoximeter Using IOT
This document describes a digital thermo-oximeter system that monitors patients' vital signs like temperature, pulse rate, and blood oxygen levels using sensors. The system collects data using sensors connected to a Raspberry Pi microcontroller. The Raspberry Pi then sends the health data to an online platform called ThingsBoard using WiFi. Doctors can monitor patients' conditions in real-time through this online platform without direct contact. The system aims to help doctors efficiently monitor multiple patients, especially during emergencies like the COVID-19 pandemic. It reduces costs and resources needed for direct in-person care while still providing live health insights.
Solar Powered Smart Agriculture Systems Using WSN Via IoT
The document describes a proposed solar-powered smart agriculture system using wireless sensor networks and the Internet of Things. Sensors would monitor soil moisture, water level, humidity, temperature, and other crop/field conditions. A NodeMCU microcontroller would collect sensor data and send it via the cloud to a mobile app for farmers to monitor in real-time. This would help farmers optimize crop yields, efficiency, and reduce stress on farmers by automating some agriculture tasks. The system is intended to advance smart agriculture using renewable energy and modern technologies.
IRJET- Home Automation using IoT: Review
This document summarizes research on using Internet of Things (IoT) technology for home automation and security. It discusses how IoT allows devices in the home to be controlled remotely through a smartphone app and can automate tasks. The document also reviews different approaches others have taken to implement smart home security systems using sensors and microcontrollers connected to the Internet. It describes the typical architecture of an IoT system including sensor, network, and application layers. Finally, it summarizes several research papers on developing smart home and kitchen monitoring systems using technologies like Arduino, Raspberry Pi, and sensors for functions like detecting fires, gas leaks, and intruders.
IRJET- Solar Power Monitoring System using IoT
This document describes a solar power monitoring system using IoT technology. The system uses an ATmega 328 microcontroller to monitor the voltage, current and power output of solar panels. It then transmits this data wirelessly to an IoT platform called Thingspeak using an ESP8266 WiFi module. On Thingspeak, the data can be analyzed to monitor the solar plant's performance over time and detect any faults. This allows remote monitoring of solar plants from any location over the internet for improved maintenance and efficiency.
Internet of things-based photovoltaics parameter monitoring system using Node...
The use of the internet of things (IoT) in solar photovoltaic (PV) systems is a critical feature for remote monitoring, supervising, and performance evaluation. Furthermore, it improves the long-term viability, consistency, efficiency, and system maintenance of energy production. However, previous researchers' proposed PV monitoring systems are relatively complex and expensive. Furthermore, the existing systems do not have any backup data, which means that the acquired data could be lost if the network connection fails. This paper presents a simple and low-cost IoT-based PV parameter monitoring system, with additional backup data stored on a microSD card. A NodeMCU ESP8266 development board is chosen as the main controller because it is a system-on-chip (SOC) microcontroller with integrated Wi-Fi and low-power support, all in one chip to reduce the cost of the proposed system. The solar irradiance, ambient temperature, PV output voltage and PV output current, are measured with photo-diodes, DHT22, impedance dividers and ACS712. While, the PV output power is a product of the PV voltage and PV current. ThingSpeak, an opensource software, is used as a cloud database and data monitoring tool in the form of interactive graphics. The results showed that the system was designed to be highly accurate, reliable, simple to use, and low-cost.
Design and Development of a Weather Drone Using IoT
This document describes the design and development of a weather drone using IoT technology. A team of students and professors from S.G. Balekundri Institute of Technology in Belgaum, India worked on this project. They equipped a drone with sensors to measure temperature and humidity and transmit the data via WiFi to a cloud server. An Android app and website were created to visualize the weather data in real-time. The drone was tested on an agricultural site and successfully recorded temperature and humidity levels that followed typical daily weather patterns. The project demonstrated how IoT-enabled drones can help farmers access real-time weather data to make informed decisions about crop management.
Low-cost real-time internet of things-based monitoring system for power grid ...
This system creates a low-cost IoT-based monitoring system for power grid transformers to monitor their status in real-time. Sensors measure temperature, humidity, oil level, voltage, vibration, and pressure and send the data via ESP32 to a cloud interface. This allows maintenance centers to detect abnormalities before failures and improve transformer efficiency in smart grids. The low-cost system was built for under $23 using inexpensive and accessible components like an ESP32 board, DHT22 sensor, and ultrasonic sensor. It demonstrates the feasibility of remotely monitoring transformers to extend their lifetimes.
Internet of Things (IOT) Application for Determination of Soil Moisture Conte...
This document proposes an Internet of Things (IoT) system to detect low soil moisture levels in plants and automatically water them. The system uses an ESP8266 microcontroller connected to a soil moisture sensor and motor. It sends soil moisture readings to the CloudMQTT platform, notifying farmers on their devices. When the reading is below a set threshold, the motor is activated to water the plants. The system was tested on various soil samples and detected moisture levels with 95% accuracy, successfully watering plants when needed. This low-cost, portable system could help prevent crop failures by remotely monitoring soil moisture and optimizing irrigation using IoT technology.
DATA ACQUISITION AND ALERT SYSTEM USING BLYNK PLATFORM
This document describes a data acquisition and alert system using the Blynk platform to facilitate Industry 4.0. The system collects data from sensors interfaced with a Node MCU microcontroller, including temperature sensors and a proximity sensor on an extruder machine. The sensor data is analyzed on the Blynk IoT platform. The system sends alerts through Blynk when sensor values indicate issues requiring attention, such as high temperatures. Experimental results found the data acquisition system calculated production rates accurately compared to manual calculations, with 98% accuracy over 9.5 hours of operation. The system successfully monitored machine operations and sent alerts.
Real-time wireless temperature measurement system of infant incubator
The internet of things (IoT) has allowed for ubiquitous measurement. Infant incubator temperature is one of crucial parts that need to be measured, especially for the stability and uniformity temperature. Based on the interpretation of IEC 60601-2-19, we proposed measurement method using IoT with the message queue telemetry transport (MQTT). In the 10,000 packet, the result shows the quality of service (QoS) level 2 of the system has the highest delay, however it has the lowest packet loss data than the other QoS. For 1 hour, the uniformity result and stability can fulfill the standards. Uniformity of 32°C, the lowest difference is point C with 0.32 °C, and the highest difference is point B with 0.75 °C. Uniformity of 36 °C, the lowest difference is point B with 0.27 °C, and the highest difference is point C with 0.79 °C. The stability of 32 °C and 36 °C is 0.32 °C and 0.44 °C, respectively. Moreover, the Kruskal Wallis test shows the highest difference average from point M is point A and B. It occurred because of the point A and B located far from the heater part, so the point A and B colder than point C.
IRJET- Solar Power Based Remote Monitoring and Control of Industrial Paramete...
This document describes a proposed system for remote monitoring and control of industrial parameters using solar power and IoT technology. The system uses various sensors to measure parameters like temperature, pressure, gas levels etc. and sends the data via an IoT module to the cloud for storage. A user can access the parameter values through software on their device and control devices remotely. If any parameters exceed thresholds, automated actions are taken like turning on cooling fans. The system aims to improve safety and efficiency by allowing constant remote monitoring without human intervention. It can send alerts if emergencies like fires occur and notify authorities. The solar power aspect makes it more sustainable by reducing energy usage for monitoring.
IRJET- Smart Weather Monitoring and Real Time Alert System using IoT
This document proposes a smart weather monitoring system using IoT that measures various weather parameters like temperature, humidity, wind speed, etc. using sensors. The sensors send real-time data to a web page for access from anywhere. An app also sends alerts about sudden weather changes. While existing systems have limitations like high costs, maintenance needs and delayed warnings, the proposed system is compact, portable, and cheaper due to its solar power and sensor costs. It analyzes sensor data using an API and Raspberry Pi to predict weather accurately. This smart monitoring system could benefit various industries.
Similar to Ijecet 06 06_006 (20)
IRJET- Smart Dustbin Container using IoT Notification
IRJET- Smart Dustbin Container using IoT Notification
A Survey on Solar Based Smart Antibiotic Sprinkler System Using Internet of T...
A Survey on Solar Based Smart Antibiotic Sprinkler System Using Internet of T...
Implementation of IoT in Agriculture: A Scientific Approach for Smart Irriga...
Implementation of IoT in Agriculture: A Scientific Approach for Smart Irriga...
A Review Paper on Emerging Areas and Applications of IoT
A Review Paper on Emerging Areas and Applications of IoT
Solar Powered Smart Agriculture Systems Using WSN Via IoT
Solar Powered Smart Agriculture Systems Using WSN Via IoT
Internet of things-based photovoltaics parameter monitoring system using Node...
Internet of things-based photovoltaics parameter monitoring system using Node...
Design and Development of a Weather Drone Using IoT
Design and Development of a Weather Drone Using IoT
Low-cost real-time internet of things-based monitoring system for power grid ...
Low-cost real-time internet of things-based monitoring system for power grid ...
Internet of Things (IOT) Application for Determination of Soil Moisture Conte...
Internet of Things (IOT) Application for Determination of Soil Moisture Conte...
DATA ACQUISITION AND ALERT SYSTEM USING BLYNK PLATFORM
DATA ACQUISITION AND ALERT SYSTEM USING BLYNK PLATFORM
Real-time wireless temperature measurement system of infant incubator
Real-time wireless temperature measurement system of infant incubator
IRJET- Solar Power Based Remote Monitoring and Control of Industrial Paramete...
IRJET- Solar Power Based Remote Monitoring and Control of Industrial Paramete...
IRJET- Smart Weather Monitoring and Real Time Alert System using IoT
IRJET- Smart Weather Monitoring and Real Time Alert System using IoT
More from IAEME Publication
IAEME_Publication_Call_for_Paper_September_2022.pdf
Submission Deadline: 30th September 2022
Acceptance Notification: Within Three Days’ time period
Online Publication: Within 24 Hrs. time Period
Expected Date of Dispatch of Printed Journal: 5th October 2022
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
White layer thickness (WLT) formed and surface roughness in wire electric discharge turning (WEDT) of tungsten carbide composite has been made to model through response surface methodology (RSM). A Taguchi’s standard Design of experiments involving five input variables with three levels has been employed to establish a mathematical model between input parameters and responses. Percentage of cobalt content, spindle speed, Pulse on-time, wire feed and pulse off-time were changed during the experimental tests based on the Taguchi’s orthogonal array L27 (3^13). Analysis of variance (ANOVA) revealed that the mathematical models obtained can adequately describe performance within the parameters of the factors considered. There was a good agreement between the experimental and predicted values in this study.
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
The study explores the reasons for a transgender to become entrepreneurs. In this study transgender entrepreneur was taken as independent variable and reasons to become as dependent variable. Data were collected through a structured questionnaire containing a five point Likert Scale. The study examined the data of 30 transgender entrepreneurs in Salem Municipal Corporation of Tamil Nadu State, India. Simple Random sampling technique was used. Garrett Ranking Technique (Percentile Position, Mean Scores) was used as the analysis for the present study to identify the top 13 stimulus factors for establishment of trans entrepreneurial venture. Economic advancement of a nation is governed upon the upshot of a resolute entrepreneurial doings. The conception of entrepreneurship has stretched and materialized to the socially deflated uncharted sections of transgender community. Presently transgenders have smashed their stereotypes and are making recent headlines of achievements in various fields of our Indian society. The trans-community is gradually being observed in a new light and has been trying to achieve prospective growth in entrepreneurship. The findings of the research revealed that the optimistic changes are taking place to change affirmative societal outlook of the transgender for entrepreneurial ventureship. It also laid emphasis on other transgenders to renovate their traditional living. The paper also highlights that legislators, supervisory body should endorse an impartial canons and reforms in Tamil Nadu Transgender Welfare Board Association.
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
Since ages gender difference is always a debatable theme whether caused by nature, evolution or environment. The birth of a transgender is dreadful not only for the child but also for their parents. The pain of living in the wrong physique and treated as second class victimized citizen is outrageous and fully harboured with vicious baseless negative scruples. For so long, social exclusion had perpetuated inequality and deprivation experiencing ingrained malign stigma and besieged victims of crime or violence across their life spans. They are pushed into the murky way of life with a source of eternal disgust, bereft sexual potency and perennial fear. Although they are highly visible but very little is known about them. The common public needs to comprehend the ravaged arrogance on these insensitive souls and assist in integrating them into the mainstream by offering equal opportunity, treat with humanity and respect their dignity. Entrepreneurship in the current age is endorsing the gender fairness movement. Unstable careers and economic inadequacy had inclined one of the gender variant people called Transgender to become entrepreneurs. These tiny budding entrepreneurs resulted in economic transition by means of employment, free from the clutches of stereotype jobs, raised standard of living and handful of financial empowerment. Besides all these inhibitions, they were able to witness a platform for skill set development that ignited them to enter into entrepreneurial domain. This paper epitomizes skill sets involved in trans-entrepreneurs of Thoothukudi Municipal Corporation of Tamil Nadu State and is a groundbreaking determination to sightsee various skills incorporated and the impact on entrepreneurship.
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
The banking and financial services industries are experiencing increased technology penetration. Among them, the banking industry has made technological advancements to better serve the general populace. The economy focused on transforming the banking sector's system into a cashless, paperless, and faceless one. The researcher wants to evaluate the user's intention for utilising a mobile banking application. The study also examines the variables affecting the user's behaviour intention when selecting specific applications for financial transactions. The researcher employed a well-structured questionnaire and a descriptive study methodology to gather the respondents' primary data utilising the snowball sampling technique. The study includes variables like performance expectations, effort expectations, social impact, enabling circumstances, and perceived risk. Each of the aforementioned variables has a major impact on how users utilise mobile banking applications. The outcome will assist the service provider in comprehending the user's history with mobile banking applications.
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
Technology upgradation in banking sector took the economy to view that payment mode towards online transactions using mobile applications. This system enabled connectivity between banks, Merchant and user in a convenient mode. there are various applications used for online transactions such as Google pay, Paytm, freecharge, mobikiwi, oxygen, phonepe and so on and it also includes mobile banking applications. The study aimed at evaluating the predilection of the user in adopting digital transaction. The study is descriptive in nature. The researcher used random sample techniques to collect the data. The findings reveal that mobile applications differ with the quality of service rendered by Gpay and Phonepe. The researcher suggest the Phonepe application should focus on implementing the application should be user friendly interface and Gpay on motivating the users to feel the importance of request for money and modes of payments in the application.
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
The prototype of a voice-based ATM for visually impaired using Arduino is to help people who are blind. This uses RFID cards which contain users fingerprint encrypted on it and interacts with the users through voice commands. ATM operates when sensor detects the presence of one person in the cabin. After scanning the RFID card, it will ask to select the mode like –normal or blind. User can select the respective mode through voice input, if blind mode is selected the balance check or cash withdraw can be done through voice input. Normal mode procedure is same as the existing ATM.
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
There is increasing acceptability of emotional intelligence as a major factor in personality assessment and effective human resource management. Emotional intelligence as the ability to build capacity, empathize, co-operate, motivate and develop others cannot be divorced from both effective performance and human resource management systems. The human person is crucial in defining organizational leadership and fortunes in terms of challenges and opportunities and walking across both multinational and bilateral relationships. The growing complexity of the business world requires a great deal of self-confidence, integrity, communication, conflict and diversity management to keep the global enterprise within the paths of productivity and sustainability. Using the exploratory research design and 255 participants the result of this original study indicates strong positive correlation between emotional intelligence and effective human resource management. The paper offers suggestions on further studies between emotional intelligence and human capital development and recommends for conflict management as an integral part of effective human resource management.
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
Our life journey, in general, is closely defined by the way we understand the meaning of why we coexist and deal with its challenges. As we develop the "inspiration economy", we could say that nearly all of the challenges we have faced are opportunities that help us to discover the rest of our journey. In this note paper, we explore how being faced with the opportunity of being a close carer for an aging parent with dementia brought intangible discoveries that changed our insight of the meaning of the rest of our life journey.
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
The main objective of this study is to analyze the impact of aspects of Organizational Culture on the Effectiveness of the Performance Management System (PMS) in the Health Care Organization at Thanjavur. Organizational Culture and PMS play a crucial role in present-day organizations in achieving their objectives. PMS needs employees’ cooperation to achieve its intended objectives. Employees' cooperation depends upon the organization’s culture. The present study uses exploratory research to examine the relationship between the Organization's culture and the Effectiveness of the Performance Management System. The study uses a Structured Questionnaire to collect the primary data. For this study, Thirty-six non-clinical employees were selected from twelve randomly selected Health Care organizations at Thanjavur. Thirty-two fully completed questionnaires were received.
GANDHI ON NON-VIOLENT POLICE
Living in 21st century in itself reminds all of us the necessity of police and its administration. As more and more we are entering into the modern society and culture, the more we require the services of the so called ‘Khaki Worthy’ men i.e., the police personnel. Whether we talk of Indian police or the other nation’s police, they all have the same recognition as they have in India. But as already mentioned, their services and requirements are different after the like 26th November, 2008 incidents, where they without saving their own lives has sacrificed themselves without any hitch and without caring about their respective family members and wards. In other words, they are like our heroes and mentors who can guide us from the darkness of fear, militancy, corruption and other dark sides of life and so on. Now the question arises, if Gandhi would have been alive today, what would have been his reaction/opinion to the police and its functioning? Would he have some thing different in his mind now what he had been in his mind before the partition or would he be going to start some Satyagraha in the form of some improvement in the functioning of the police administration? Really these questions or rather night mares can come to any one’s mind, when there is too much confusion is prevailing in our minds, when there is too much corruption in the society and when the polices working is also in the questioning because of one or the other case throughout the India. It is matter of great concern that we have to thing over our administration and our practical approach because the police personals are also like us, they are part and parcel of our society and among one of us, so why we all are pin pointing towards them.
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
The goal of this study was to see how talent management affected employee retention in the selected IT organizations in Chennai. The fundamental issue was the difficulty to attract, hire, and retain talented personnel who perform well and the gap between supply and demand of talent acquisition and retaining them within the firms. The study's main goals were to determine the impact of talent management on employee retention in IT companies in Chennai, investigate talent management strategies that IT companies could use to improve talent acquisition, performance management, career planning and formulate retention strategies that the IT firms could use. The respondents were given a structured close-ended questionnaire with the 5 Point Likert Scale as part of the study's quantitative research design. The target population consisted of 289 IT professionals. The questionnaires were distributed and collected by the researcher directly. The Statistical Package for Social Sciences (SPSS) was used to collect and analyse the questionnaire responses. Hypotheses that were formulated for the various areas of the study were tested using a variety of statistical tests. The key findings of the study suggested that talent management had an impact on employee retention. The studies also found that there is a clear link between the implementation of talent management and retention measures. Management should provide enough training and development for employees, clarify job responsibilities, provide adequate remuneration packages, and recognise employees for exceptional performance.
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
Globally, Millions of dollars were spent by the organizations for employing skilled Information Technology (IT) professionals. It is costly to replace unskilled employees with IT professionals possessing technical skills and competencies that aid in interconnecting the business processes. The organization’s employment tactics were forced to alter by globalization along with technological innovations as they consistently diminish to remain lean, outsource to concentrate on core competencies along with restructuring/reallocate personnel to gather efficiency. As other jobs, organizations or professions have become reasonably more appropriate in a shifting employment landscape, the above alterations trigger both involuntary as well as voluntary turnover. The employee view on jobs is also afflicted by the COVID-19 pandemic along with the employee-driven labour market. So, having effective strategies is necessary to tackle the withdrawal rate of employees. By associating Emotional Intelligence (EI) along with Talent Management (TM) in the IT industry, the rise in attrition rate was analyzed in this study. Only 303 respondents were collected out of 350 participants to whom questionnaires were distributed. From the employees of IT organizations located in Bangalore (India), the data were congregated. A simple random sampling methodology was employed to congregate data as of the respondents. Generating the hypothesis along with testing is eventuated. The effect of EI and TM along with regression analysis between TM and EI was analyzed. The outcomes indicated that employee and Organizational Performance (OP) were elevated by effective EI along with TM.
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
By implementing talent management strategy, organizations would have the option to retain their skilled professionals while additionally working on their overall performance. It is the course of appropriately utilizing the ideal individuals, setting them up for future top positions, exploring and dealing with their performance, and holding them back from leaving the organization. It is employee performance that determines the success of every organization. The firm quickly obtains an upper hand over its rivals in the event that its employees having particular skills that cannot be duplicated by the competitors. Thus, firms are centred on creating successful talent management practices and processes to deal with the unique human resources. Firms are additionally endeavouring to keep their top/key staff since on the off chance that they leave; the whole store of information leaves the firm's hands. The study's objective was to determine the impact of talent management on organizational performance among the selected IT organizations in Chennai. The study recommends that talent management limitedly affects performance. On the off chance that this talent is appropriately management and implemented properly, organizations might benefit as much as possible from their maintained assets to support development and productivity, both monetarily and non-monetarily.
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
Banking regulations act of India, 1949 defines banking as “acceptance of deposits for the purpose of lending or investment from the public, repayment on demand or otherwise and withdrawable through cheques, drafts order or otherwise”, the major participants of the Indian financial system are commercial banks, the financial institution encompassing term lending institutions. Investments institutions, specialized financial institution and the state level development banks, non banking financial companies (NBFC) and other market intermediaries such has the stock brokers and money lenders are among the oldest of the certain variants of NBFC and the oldest market participants. The asset quality of banks is one of the most important indicators of their financial health. The Indian banking sector has been facing severe problems of increasing Non- Performing Assets (NPAs). The NPAs growth directly and indirectly affects the quality of assets and profitability of banks. It also shows the efficiency of banks credit risk management and the recovery effectiveness. NPA do not generate any income, whereas, the bank is required to make provisions for such as assets that why is a double edge weapon. This paper outlines the concept of quality of bank loans of different types like Housing, Agriculture and MSME loans in state Haryana of selected public and private sector banks. This study is highlighting problems associated with the role of commercial bank in financing Small and Medium Scale Enterprises (SME). The overall objective of the research was to assess the effect of the financing provisions existing for the setting up and operations of MSMEs in the country and to generate recommendations for more robust financing mechanisms for successful operation of the MSMEs, in turn understanding the impact of MSME loans on financial institutions due to NPA. There are many research conducted on the topic of Non- Performing Assets (NPA) Management, concerning particular bank, comparative study of public and private banks etc. In this paper the researcher is considering the aggregate data of selected public sector and private sector banks and attempts to compare the NPA of Housing, Agriculture and MSME loans in state Haryana of public and private sector banks. The tools used in the study are average and Anova test and variance. The findings reveal that NPA is common problem for both public and private sector banks and is associated with all types of loans either that is housing loans, agriculture loans and loans to SMES. NPAs of both public and private sector banks show the increasing trend. In 2010-11 GNPA of public and private sector were at same level it was 2% but after 2010-11 it increased in many fold and at present there is GNPA in some more than 15%. It shows the dark area of Indian banking sector.
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
An experiment conducted in this study found that BaSO4 changed Nylon 6's mechanical properties. By changing the weight ratios, BaSO4 was used to make Nylon 6. This Researcher looked into how hard Nylon-6/BaSO4 composites are and how well they wear. Experiments were done based on Taguchi design L9. Nylon-6/BaSO4 composites can be tested for their hardness number using a Rockwell hardness testing apparatus. On Nylon/BaSO4, the wear behavior was measured by a wear monitor, pinon-disc friction by varying reinforcement, sliding speed, and sliding distance, and the microstructure of the crack surfaces was observed by SEM. This study provides significant contributions to ultimate strength by increasing BaSO4 content up to 16% in the composites, and sliding speed contributes 72.45% to the wear rate
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
The majority of the population in India lives in villages. The village is the back bone of the country. Village or rural industries play an important role in the national economy, particularly in the rural development. Developing the rural economy is one of the key indicators towards a country’s success. Whether it be the need to look after the welfare of the farmers or invest in rural infrastructure, Governments have to ensure that rural development isn’t compromised. The economic development of our country largely depends on the progress of rural areas and the standard of living of rural masses. Village or rural industries play an important role in the national economy, particularly in the rural development. Rural entrepreneurship is based on stimulating local entrepreneurial talent and the subsequent growth of indigenous enterprises. It recognizes opportunity in the rural areas and accelerates a unique blend of resources either inside or outside of agriculture. Rural entrepreneurship brings an economic value to the rural sector by creating new methods of production, new markets, new products and generate employment opportunities thereby ensuring continuous rural development. Social Entrepreneurship has the direct and primary objective of serving the society along with the earning profits. So, social entrepreneurship is different from the economic entrepreneurship as its basic objective is not to earn profits but for providing innovative solutions to meet the society needs which are not taken care by majority of the entrepreneurs as they are in the business for profit making as a sole objective. So, the Social Entrepreneurs have the huge growth potential particularly in the developing countries like India where we have huge societal disparities in terms of the financial positions of the population. Still 22 percent of the Indian population is below the poverty line and also there is disparity among the rural & urban population in terms of families living under BPL. 25.7 percent of the rural population & 13.7 percent of the urban population is under BPL which clearly shows the disparity of the poor people in the rural and urban areas. The need to develop social entrepreneurship in agriculture is dictated by a large number of social problems. Such problems include low living standards, unemployment, and social tension. The reasons that led to the emergence of the practice of social entrepreneurship are the above factors. The research problem lays upon disclosing the importance of role of social entrepreneurship in rural development of India. The paper the tendencies of social entrepreneurship in India, to present successful examples of such business for providing recommendations how to improve situation in rural areas in terms of social entrepreneurship development. Indian government has made some steps towards development of social enterprises, social entrepreneurship, and social in- novation, but a lot remains to be improved.
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
Distribution system is a critical link between the electric power distributor and the consumers. Most of the distribution networks commonly used by the electric utility is the radial distribution network. However in this type of network, it has technical issues such as enormous power losses which affect the quality of the supply. Nowadays, the introduction of Distributed Generation (DG) units in the system help improve and support the voltage profile of the network as well as the performance of the system components through power loss mitigation. In this study network reconfiguration was done using two meta-heuristic algorithms Particle Swarm Optimization and Gravitational Search Algorithm (PSO-GSA) to enhance power quality and voltage profile in the system when simultaneously applied with the DG units. Backward/Forward Sweep Method was used in the load flow analysis and simulated using the MATLAB program. Five cases were considered in the Reconfiguration based on the contribution of DG units. The proposed method was tested using IEEE 33 bus system. Based on the results, there was a voltage profile improvement in the system from 0.9038 p.u. to 0.9594 p.u.. The integration of DG in the network also reduced power losses from 210.98 kW to 69.3963 kW. Simulated results are drawn to show the performance of each case.
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
Manufacturing industries have witnessed an outburst in productivity. For productivity improvement manufacturing industries are taking various initiatives by using lean tools and techniques. However, in different manufacturing industries, frugal approach is applied in product design and services as a tool for improvement. Frugal approach contributed to prove less is more and seems indirectly contributing to improve productivity. Hence, there is need to understand status of frugal approach application in manufacturing industries. All manufacturing industries are trying hard and putting continuous efforts for competitive existence. For productivity improvements, manufacturing industries are coming up with different effective and efficient solutions in manufacturing processes and operations. To overcome current challenges, manufacturing industries have started using frugal approach in product design and services. For this study, methodology adopted with both primary and secondary sources of data. For primary source interview and observation technique is used and for secondary source review has done based on available literatures in website, printed magazines, manual etc. An attempt has made for understanding application of frugal approach with the study of manufacturing industry project. Manufacturing industry selected for this project study is Mahindra and Mahindra Ltd. This paper will help researcher to find the connections between the two concepts productivity improvement and frugal approach. This paper will help to understand significance of frugal approach for productivity improvement in manufacturing industry. This will also help to understand current scenario of frugal approach in manufacturing industry. In manufacturing industries various process are involved to deliver the final product. In the process of converting input in to output through manufacturing process productivity plays very critical role. Hence this study will help to evolve status of frugal approach in productivity improvement programme. The notion of frugal can be viewed as an approach towards productivity improvement in manufacturing industries.
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
In this paper, we investigated a queuing model of fuzzy environment-based a multiple channel queuing model (M/M/C) ( /FCFS) and study its performance under realistic conditions. It applies a nonagonal fuzzy number to analyse the relevant performance of a multiple channel queuing model (M/M/C) ( /FCFS). Based on the sub interval average ranking method for nonagonal fuzzy number, we convert fuzzy number to crisp one. Numerical results reveal that the efficiency of this method. Intuitively, the fuzzy environment adapts well to a multiple channel queuing models (M/M/C) ( /FCFS) are very well.
More from IAEME Publication (20)
IAEME_Publication_Call_for_Paper_September_2022.pdf
IAEME_Publication_Call_for_Paper_September_2022.pdf
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
MODELING AND ANALYSIS OF SURFACE ROUGHNESS AND WHITE LATER THICKNESS IN WIRE-...
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
A STUDY ON THE REASONS FOR TRANSGENDER TO BECOME ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
BROAD UNEXPOSED SKILLS OF TRANSGENDER ENTREPRENEURS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
DETERMINANTS AFFECTING THE USER'S INTENTION TO USE MOBILE BANKING APPLICATIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
ANALYSE THE USER PREDILECTION ON GPAY AND PHONEPE FOR DIGITAL TRANSACTIONS
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
VOICE BASED ATM FOR VISUALLY IMPAIRED USING ARDUINO
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
IMPACT OF EMOTIONAL INTELLIGENCE ON HUMAN RESOURCE MANAGEMENT PRACTICES AMONG...
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
VISUALISING AGING PARENTS & THEIR CLOSE CARERS LIFE JOURNEY IN AGING ECONOMY
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON THE IMPACT OF ORGANIZATIONAL CULTURE ON THE EFFECTIVENESS OF PERFO...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
A STUDY ON TALENT MANAGEMENT AND ITS IMPACT ON EMPLOYEE RETENTION IN SELECTED...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
ATTRITION IN THE IT INDUSTRY DURING COVID-19 PANDEMIC: LINKING EMOTIONAL INTE...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
INFLUENCE OF TALENT MANAGEMENT PRACTICES ON ORGANIZATIONAL PERFORMANCE A STUD...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
A STUDY OF VARIOUS TYPES OF LOANS OF SELECTED PUBLIC AND PRIVATE SECTOR BANKS...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
EXPERIMENTAL STUDY OF MECHANICAL AND TRIBOLOGICAL RELATION OF NYLON/BaSO4 POL...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
ROLE OF SOCIAL ENTREPRENEURSHIP IN RURAL DEVELOPMENT OF INDIA - PROBLEMS AND ...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
OPTIMAL RECONFIGURATION OF POWER DISTRIBUTION RADIAL NETWORK USING HYBRID MET...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
APPLICATION OF FRUGAL APPROACH FOR PRODUCTIVITY IMPROVEMENT - A CASE STUDY OF...
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
A MULTIPLE – CHANNEL QUEUING MODELS ON FUZZY ENVIRONMENT
Recently uploaded
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
一比一原版(uoft毕业证书)加拿大多伦多大学毕业证如何办理
原版一模一样【微信：741003700 】【(uoft毕业证书)加拿大多伦多大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uoft毕业证书)加拿大多伦多大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques
Digital Twins Computer Networking Paper Presentation.pptx
A Digital Twin in computer networking is a virtual representation of a physical network, used to simulate, analyze, and optimize network performance and reliability. It leverages real-time data to enhance network management, predict issues, and improve decision-making processes.
Assistant Engineer (Chemical) Interview Questions.pdf
These are interview questions for the post of Assistant Engineer (Chemical)
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Impartiality as per ISO /IEC 17025:2017 Standard
This document provides basic guidelines for imparitallity requirement of ISO 17025. It defines in detial how it is met and wiudhwdih jdhsjdhwudjwkdbjwkdddddddddddkkkkkkkkkkkkkkkkkkkkkkkwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwioiiiiiiiiiiiii uwwwwwwwwwwwwwwwwhe wiqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq gbbbbbbbbbbbbb owdjjjjjjjjjjjjjjjjjjjj widhi owqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq uwdhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhwqiiiiiiiiiiiiiiiiiiiiiiiiiiiiw0pooooojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj whhhhhhhhhhh wheeeeeeee wihieiiiiii wihe
e qqqqqqqqqqeuwiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiqw dddddddddd cccccccccccccccv s w c r
cdf cb bicbsad ishd d qwkbdwiur e wetwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwwww w
dddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddddfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffw
uuuuhhhhhhhhhhhhhhhhhhhhhhhhe qiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii iqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqccccccccccccccccccccccccccccccccccccccccccccccccccccccccccccc ccccccccccccccccccccccccccccccccccc bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbu uuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuuum
m
m mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm m i
g i dijsd sjdnsjd ndjajsdnnsa adjdnawddddddddddddd uw
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(CalArts毕业证)加利福尼亚艺术学院毕业证如何办理
CalArts毕业证学历书【微信95270640】CalArts毕业证’圣力嘉学院毕业证《Q微信95270640》办理CalArts毕业证√文凭学历制作{CalArts文凭}购买学历学位证书本科硕士,CalArts毕业证学历学位证【实体公司】办毕业证、成绩单、学历认证、学位证、文凭认证、办留信网认证、（网上可查，实体公司，专业可靠）
(诚招代理)办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理加利福尼亚艺术学院加利福尼亚艺术学院毕业证文凭证书流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:95270640）欢迎咨询！子小伍玩小伍比山娃小一岁虎头虎脑的很霸气父亲让山娃跟小伍去夏令营听课山娃很高兴夏令营就设在附近一所小学山娃发现那所小学比自己的学校更大更美操场上还铺有塑胶跑道呢里面很多小朋友一班一班的快快乐乐原来城里娃都藏这儿来了怪不得平时见不到他们山娃恍然大悟起来吹拉弹唱琴棋书画山娃都不懂却什么都想学山娃怨自己太笨什么都不会斟酌再三山娃终于选定了学美术当听说每月要交元时父亲犹豫了山娃也说爸算了吧咱学校一学期才转
Applications of artificial Intelligence in Mechanical Engineering.pdf
Historically, mechanical engineering has relied heavily on human expertise and empirical methods to solve complex problems. With the introduction of computer-aided design (CAD) and finite element analysis (FEA), the field took its first steps towards digitization. These tools allowed engineers to simulate and analyze mechanical systems with greater accuracy and efficiency. However, the sheer volume of data generated by modern engineering systems and the increasing complexity of these systems have necessitated more advanced analytical tools, paving the way for AI.
AI offers the capability to process vast amounts of data, identify patterns, and make predictions with a level of speed and accuracy unattainable by traditional methods. This has profound implications for mechanical engineering, enabling more efficient design processes, predictive maintenance strategies, and optimized manufacturing operations. AI-driven tools can learn from historical data, adapt to new information, and continuously improve their performance, making them invaluable in tackling the multifaceted challenges of modern mechanical engineering.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Bituminous road construction project based learning report
Road construction is not as easy as it seems to be, it includes various steps and it starts with its designing and
structure including the traffic volume consideration. Then base layer is done by bulldozers and levelers and after
base surface coating has to be done. For giving road a smooth surface with flexibility, Asphalt concrete is used.
Asphalt requires an aggregate sub base material layer, and then a base layer to be put into first place. Asphalt road
construction is formulated to support the heavy traffic load and climatic conditions. It is 100% recyclable and
saving non renewable natural resources.
With the advancement of technology, Asphalt technology gives assurance about the good drainage system and with
skid resistance it can be used where safety is necessary such as outsidethe schools.
The largest use of Asphalt is for making asphalt concrete for road surfaces. It is widely used in airports around the
world due to the sturdiness and ability to be repaired quickly, it is widely used for runways dedicated to aircraft
landing and taking off. Asphalt is normally stored and transported at 150’C or 300’F temperature
Supermarket Management System Project Report.pdf
Supermarket management is a stand-alone J2EE using Eclipse Juno program.
This project contains all the necessary required information about maintaining
the supermarket billing system.
The core idea of this project to minimize the paper work and centralize the
data. Here all the communication is taken in secure manner. That is, in this
application the information will be stored in client itself. For further security the
data base is stored in the back-end oracle and so no intruders can access it.
Recently uploaded (20)
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Ericsson LTE Throughput Troubleshooting Techniques.ppt
Digital Twins Computer Networking Paper Presentation.pptx
Digital Twins Computer Networking Paper Presentation.pptx
Assistant Engineer (Chemical) Interview Questions.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Applications of artificial Intelligence in Mechanical Engineering.pdf
Bituminous road construction project based learning report
Bituminous road construction project based learning report
Ijecet 06 06_006
- 1. http://www.iaeme.com/IJECET/index.asp 48 editor@iaeme.com International Journal of Electronics and Communication Engineering & Technology (IJECET) Volume 6, Issue 6, Jun 2015, pp. 48-50, Article ID: IJECET_06_06_006 Available online at http://www.iaeme.com/IJECETissues.asp?JTypeIJECET&VType=6&IType=6 ISSN Print: 0976-6464 and ISSN Online: 0976-6472 © IAEME Publication ___________________________________________________________________________ IOT BASED GREEN HOUSE MONITORING SYSTEM S. Viswanath Naik and S. Pushpa Bai M. Tech student, Dept of ECE, CRIT College of Engineering, Rachanapally(v), Anantapuramu(D), AP. P. Rajesh and B. Mallikarjuna Naik Assistant Professor, Dept of ECE, CRIT college of Engineering, Rachanapally (v), Anantapuramu(D),AP. ABSTRACT Monitoring the vital parameters of a greenhouse namely temperature and soil moisture through internet of things technology (IOT). Irrespective of wherever in the world you are through IOT technology we can monitor and control the greenhouse parameters. All the vital sensor data will be available to authorised users via internet. Even though the technology is yet to take off globally, this report analyses the possibility of integrating a greenhouse and the IOT. The project covers wide area of embedded system and networking. This paper presents a low cost and flexible greenhouse monitoring system using an embedded MCU with wifi connectitivity to the internet. The proposed system does not require a dedicated server PC with respect to similar systems and offers a light weight communication protocol to monitor and control the environment. To demonstrate the feasibility and effectiveness of this system, devices such as soil moisture sensor and temperature sensor have been integrated with the proposed greenhouse control system. Key words: IOT, MQTT and CC3200 Cite this Article: Naik, S. V., Bai, S. P. , Rajesh, P. and Naik, B. M. IOT based Green House Monitoring System. International Journal of Electronics and Communication Engineering & Technology, 6(6), 2015, pp. 48-50. http://www.iaeme.com/IJECET/issues.asp?JTypeIJECET&VType=6&IType=6 _____________________________________________________________________ 1. INTRODUCTION In the present scenario were people are moving around the world, there is an increased demand for connectivity with our properties wherever we are on the planet. Here comes the role connecting every device to the internet so that it is accessible
- 2. IOT based Green House Monitoring System http://www.iaeme.com/IJECET/index.asp 49 editor@iaeme.com wherever we have an internet access [4]. This interesting fact throws upon us the need to implement a solution integrating our present resources. This is where internet of things comes into the picture. This report focuses on implementing a smart greenhouse that can monitored using IOT technology. 2. OBJECTIVE The objective of the project is to implement a miniature model of a smart monitoring and control system of greenhouses through the internet of things technology. The proposed project aims at monitoring the various analog parameters like temperature and soil moisture and send the processed data over a wireless network to an online broker and analysed in real-time. Moreover it is proposed to enable the end users control the greenhouse parameters remotely from anywhere in the world. 3. IMPLEMENTATION The whole idea of smart greenhouse monitoring is accomplished using IOT[1]. The project provides access to control and monitor vital parameters of the farm through a network of sensors which forms the lowest nodes of a multi level IOT platform. The coding started from the TI project example which came as part of the SDK of CC3200 launch pad. A real time OS called Free RTOS was used to implement the tasks as the project involved WLAN, http server, socket programming over TCP/IP for MQTT [1]. Without an OS this would have been difficult to manage these tasks. Initially the board and the needed peripherals were initialised and two tasks were created for device configuration and data publishing/subscription. The TI support forums on CC32XX devices was extremely useful to overcome the issues that came up during coding. Paho Embedded C [2, 3, 5] client gave us the necessary support to integrate MQTT protocol into this project. Using this could send packets every 3 hours to the cloud server and it was verified using MQTT lens chrome application. This application enables users to subscribe to a particular topic or publish data to a particular topic. The same device configuration page of CC3200 which was loaded into serial flash was used for configuring the device initially [1]. Device reads the soil moisture in fixed intervals of time (in every 3 hours), and sends the data over a Wi-Fi network [2] through the gateway to the cloud application. Device supports sending the soil moisture data when it is requested from the cloud application to the end device. Device will get 1024 samples from the sensor when the request is given. Among 1024 samples the average value (simple arithmetic – average) and will be passed to the gateway for cloud application update. The idea of soil moisture sensing [3] is that, when the soil is wet, more current flows between the two electrodes and consequently the resistance will be low. When the soil is dry the current flow is less and hence resistance is more. Resistance variation largely depends upon the exposed area of the electrode surface. The moisture sensors reads the soil moisture in fixed intervals of time (in every 3 hours), and sends the data over a Wi-Fi network through the gateway to the cloud application. Device supports sending the soil moisture data when it is requested from the cloud application to the end device. Device will get 1024 samples from the sensor when the request is given. The average value (simple arithmetic – average) of these 1024 samples is calculated. This is to account for the noise that is generated in the circuitry. These values are passed to the gateway for cloud application update. The greenhouse
- 3. S. Viswanath Naik, S. Pushpa Bai, P. Rajesh and B. Mallikarjuna Naik http://www.iaeme.com/IJECET/index.asp 50 editor@iaeme.com temperature is measured using the inbuilt temperature sensor of CC3200. Both these parameters along with the timestamp is send as a packet to the cloud server every 3 hours. There is also provision for changing this updation time remotely. Moreover users can send request to get the current sensor values via MQTT. 4. CONCLUSION This paper shows the basic format of research paper preparation and IOT based greenhouse monitoring was successfully implemented with the help of internet of things technology. The basic idea of the project was achieved despite being an area yet to explored completely. Moreover there are lot of areas to be improved. REFERENCES [1] www.ti.com [2] www.iot.eclipse.org [3] www.freertos.org [4] Rai, A. K., Idrisi, S. A. and Ahmad, S. An Experimental Study of Forced Convection Green House Drying. International Journal of Advanced Research in Engineering & Technology (IJARET), 4(5), 2013, pp. 10–16. [5] http://blog.benjamin-cabe.com/2014/08/26/mqtt-on-the-ti-cc3200-launchpad- thanks-to-paho-embedded-client