This document provides a critical review of structural lightweight concrete. It discusses the history of lightweight concrete usage dating back thousands of years. Types of lightweight aggregates discussed include expanded clay aggregates and oil palm shell aggregates. Properties reviewed include compressive strength, density, elastic modulus, and permeability. The review finds that structural lightweight concrete can achieve compressive strengths of 30-80 MPa depending on the aggregate type and additions like fly ash. Overall, the document provides an overview of research on developing structural lightweight concrete using various natural and industrial waste lightweight aggregates.
2. V. Swamy Nadh and K. Muthumani
http://www.iaeme.com/IJCIET/index.asp 253 editor@iaeme.com
with a special goal to reduce the weight. This was additionally utilized for the development of Pyramids
and the Mayan time frame in Mexico.
Figure 1 Pantheon, the roman temple
Figure 2 Sumerians, Babylon building
Light weight cement can be created from numerous points of view (i) gassing operators, for example,
aluminum powder or frothing specialists, (ii) lightweight mineral total, for example, perlite, vermiculite,
pumice, extended shale, slate, and mud, or (iii) plastic granules as total, e.g., extended polystyrene froth
(EPS), polyurethane or other polymer materials (1) . Different purposes behind picking LWC as a
development material are turning out to be progressively essential and more consideration is taken to
vitality preservation and to utilization of industrial waste materials to supplant modest normal sources
(2). Thermal resistance LWC materials increase with the decreasing density and this helps in energy
savings. LWC has been generally utilized as a part of structures as stone work squares, divider boards,
rooftop decks and precast solid units. Due to decrease in dead weight of the material there is a possibility
of reduction in size of the members in structure this helps in construction of lightweight structures in
low seismic zones. LWC made with regular or from simulated total is characterized by the ACI
Committee 213 into three classifications as per its quality and thickness (3).
The fundamental goal of utilizing LWC as a part of the structures situated in seismic zones is to
decrease seismic conduct of those constructed structures. Be that as it may, because of the short coming
and weakness of lightweight total there are a few imperfections in mechanical properties of solidified
lightweight total cement. Weak nature of lightweight total prompts to untimely disappointment of the
LWAC example after pinnacle loads [9]. The shortcoming of LWAC contributes on the lessening
tractable and flexural quality of LWAC. Fragility of LWAC is opposite with the principle goal of LWAC
requires bendable conduct in seismic burdens. This can be overcome by using suitable measure of
strands or different added substances (4). For the most part, considering the importance of total network
communications in routine solid, the ordinary weight total zone is more grounded than the grid and the
interfacial move zone (ITZ). In any case, if lightweight totals are brought into a solid blend, they are the
weakest parts, which surprisingly influence the flexible and mechanical properties of LWC. Due to
decrease in sizes of the members stresses developed were enhanced and can withstand the forces coming
on the structure. In any case, if the totals are weaker contrasted and the solid mortar stage, the anxiety
3. Critical Review On Structural Light Weight Concrete
http://www.iaeme.com/IJCIET/index.asp 254 editor@iaeme.com
exchange happens through the grid and splits spread through the lightweight total (fig 3) particles.
Consequently, the lightweight totals are likewise weaker than the ITZ (5).
The utilization of lightweight total in cement has many favourable circumstances and are listed below:
• Reduction of dead weight can decrease the footings sizes and lighter the upper structure. This may bring
about decrease in bond amount and conceivable lessening in fortification.
• Lighter and littler pre-thrown components requiring littler and less costly taking care of and transporting
hardware.
• Reductions in sizes of members and bar measurements that outcome in bigger vacancy accessibility. (6)
• High thermal protection.
• helps in imperviousness to fire of the structure (Kayali, 2007; ACI 213, 2003) (7).
Figure 3 Lightweight aggregates
2. TYPES OF LIGHTWEIGHT AGGREGATES
2.2. Expanded clay aggregates
Permeable mud blocks were delivered much sooner than the Christian time, amid Indus Valley human
progress ca. 2500 B.C. These are utilized as a part of the development of two urban areas, Mohenjo-
Daro and Harappa (Fig. 1.7). It is recommended that these permeable blocks were broken and used as
lightweight sums as a part of the block work. Despite the way that the reason for the LWC is difficult to
assess, it would not be a twisting to express the establishments from the old fashioned casing.
With the increase in demand of the LWC and the less availability of the aggregates, advancement
for conveying lightweight sums has been created. In nineteenth century, penetrable mud pieces were
conveyed by smart vanishing of water. Kukenthal from Braunschweig take patent in 1880. The
mechanical usage of consistent lightweight aggregates in Germany was started in 1845 who conveyed
workmanship hinders from pumice, with blasted lime as the binder.[3] Pumice has been used as a piece
of close-by building.
Light weight Expanded earth totals (LECA) (fig 4)was created around 1917 in Kansas City, Missouri
known as Haydite which was utilized as a part of the development of USS Selma, a maritime ship
propelled in 1919. Following in the USA was the improvement of a progression of totals known as
Gravelite, Perlite, Rocklite, and so on. In Europe, LECA started in Denmark, Germany, Holland
(Netherlands), UK and Middle East. (8)
4. V. Swamy Nadh and K. Muthumani
http://www.iaeme.com/IJCIET/index.asp 255 editor@iaeme.com
Figure 4 Expanded clay aggregates
LECA has a moisture content of 12-30% which are very high compared to NWC. ECA has a dry
density of 1500-1700 kg/m3
and a fresh concrete has 1700-2000 kg/m3
. High-strength LWC can achieve
strength from 34 to 69 MPa by immersion of different pozzolans materials like fly ash, silica fume,
metakaolin, sintered clays and shales combined with different percentages of water reducers as
admixtures. The w/c ratio is less than 0.45 and air entering agents are included to the less to withstand
the stresses. This concrete maitains air-dry density of 2,000 kg/m3
and less as determined by ASTM C
567 (9).
Modulus of elasticity of cement is additionally considered alongside the thickness of cement to keep
up the firmness of the material. Typical weight concrete has a flexible modulus or modulus of flexibility
as 2.5*105 N/mm2
, where as in lightweight solid modulus of versatility changes as indicated by the kind
of totals utilized. Alireza ardakani and mahmoud yazdani had given the connection between molecule
thickness and static versatile modulus of flexibility of lightweight extended mud totals as the scopes of
the normal versatile modulus for regular and auxiliary LECA are 0.57–2.31 and 2.66–6.27 GPa,
individually (10).
Murat Emre Dilli et all had figured the recipe for modulus of flexible of LWC with various
methodologies made my ACI and CEB-FIB. They have presumed that relying upon water to bond
proportion the compressive strength changed between 24Mpa to 31Mpa for lightweight total cement of
thickness 1750-1800 kg/m3
, and 52Mpa to 68Mpa for lightweight total cement of thickness 1900-2200
kg/m3
, 61Mpa to 75Mpa for ordinary concrete or customary cement of thickness 2300 kg/m3
or more.
(5)
As there is an expansion of compressive strength when LWC are supplanted with reused dirt totals
and auxiliary proficiency is expanded when LWC is dynamically supplanted with RCA. Compressive
strength is kept up in the middle of 30-45 MPa when auxiliary LWC with Leca is supplanted with reused
totals and assimilation of water by the example is 12-25%, carbonation resistance of 70% is
accomplished. Flexible properties are arranged and employments of versatile modulus qualities are
recorded by LWA. Utilizing ECA of review 2, which has a dry thickness of 1900-2100 kg/m3
gives
compressive strength of 60-80 MPa, properties of such review are recorded in table (11). In the event
that customary cement and LWAC is contrasted with strain values, there is a high estimation of strain
saw in LWAC (12). With the utilization of fly powder in LWAC there is an expansion of 8% in
compressive strength and abatement in porosity by 24%, split rigidity expanded by 9% and thickness of
cement expanded by 3% (7).
5. Critical Review On Structural Light Weight Concrete
http://www.iaeme.com/IJCIET/index.asp 256 editor@iaeme.com
Table 1 Composition of cement and fly ash
Cement
Chemical composition
Fly ash
Chemical composition
SiO2 20.32 SiO2 48.53
Al2O3 5.59 Al2O3 24.61
Fe2O3 3.09 Fe2O3 7.59
CaO 62.50 CaO 9.48
MgO 1.74 MgO 2.28
SO3 3.29 SO3 2.48
Na2O 0.34 Na2O 1.18
K2O 0.91 K2O 2.51
Loss on ignition S+A+F 80.73
Unknown 0.31 - -
CaO 0.93 - -
Table 2 Summary of Expanded Clay Aggregates (ECA)
Author
name
Aggregat
e type
Fly ash
(%)
Cement
(kg)
Fly ash
(kg)
Water
(liter)
Admixtur
e (liter)
Water
absorption
(%)
Moisture
content (%)
Specific
gravity
(gm/cm3
)
Serkan
subasi (7)
ECA 10 315 35 157.5 4.2 22.4 0.09 1.22
20 320 80 180 4.8 22.4 0.09 1.22
30 315 135 202.5 5.4 22.4 0.09 1.22
Augusto
Gomes, et
al. (13)
ECA 100 350 100 158
180 270 180 158
100 350 100 158
Payam
Shafig, et
al. (12)
ECA 550 141.4 2.75 23.5 0.08 1.23
Murat
emare dilli
et al. (5)
ECA 100 451 100 188 26
101 457 101 190 23.2
j.alexandre
Bogas (14)
ECA 350 192.5 12.6
6. V. Swamy Nadh and K. Muthumani
http://www.iaeme.com/IJCIET/index.asp 257 editor@iaeme.com
Table 3 Properties of Expanded Clay Aggregates (ECA)
Author name
Selection
Aggregate type
Particle density (kg/m3
)
Compressive strength
(MPa)
Tensile strength (MPa)
Serkan subasi (7) ECA 1100 15.60 1.74
1700 22.05 2.27
1950 41.27 2.34
Payam Shafig ,et
al. (12)
ECA 1809 30.8 2.77
Augusto Gomes,
et al. (13)
ECA 1068 Slump flow (600-750
mm)
v-funnel
9-15
1290 L-box
0.8
U-box
>300
Murat emare dilli
et al. (5)
ECA 720 30Mpa 1.35
1750 55Mpa 3.70
j.alexandre Bogas
(14)
ECA 1735 43Mpa 1.7
Carbonation resistance
-2.46 mm/day
Chloride diffusion –
12.66 10-2
m2
/s
2.2. Oil Palm Shell (OPS)
The use of OPS as a lightweight aggregate for delivering LWC was investigated in 1984 by Abdullah
in Malaysia and by Okafor in Nigeria. By and large, is demonstrated that the compressive strength of
OPS LWC, with and without cementitious materials, is inside the run of the mill compressive strength
for basic LWC is about 20–35 MP with a density of around 20–25% lower than ordinary weight concrete
(NWC). In any case, late studies have demonstrated the likelihood of creating high quality OPS
lightweight solid (Fig 5) of up to around 53 and 56 MPa for 28 and 56 days compressive strength.
The 28days dry density of OPS cement was inside the range for auxiliary LWC and was around 20%
not as much as customary cement. The compressive strength of OPS cement was within the range for
auxiliary LWC and was around half not as much as conventional cement. Fly fiery debris as bond swap
for OPS concrete negatively affected its compressive strength with a diminishment of up to 29%.
Operations concrete achieved the most noteworthy quality under 56days water curing contrasted and
6days water curing and with plastic film curing (15).
The 28days mechanical compressive strength of OPS cements are around 20 and 24 N/mm2
and
fulfil the prerequisite for auxiliary LWC. The 28-day flexural strength of OPS is existing in between
2.75 and 4.00N/mm2
and it is around 14.7-17.2% of its compressive strength. For ordinary weight
concrete, the flexural quality is generally around 15% of compressive strength. The 28-day part elastic
properties for OPS cement is around 1.79 and 2.48 N/mm2
.It is almost 12% of the 28-day compressive
strength. The 28-day modulus of elasticity of OPS cement is 0.70-0.76 *104
N/mm2
, around 0.28-0.29
of the E estimations of control cement in this study. More often than not modulus of flexibility of LWC
is inside estimation of conventional concrete by around 0.34-0.66 of E. At 90 days, OPS solid shows
16% more drying shrinkage than conventional concrete. (16).
7. Critical Review On Structural Light Weight Concrete
http://www.iaeme.com/IJCIET/index.asp 258 editor@iaeme.com
Figure 5 Oil palm shell
The lightweight concrete with high workability and matrix material can be obtained normally by oil
palm shell concrete. It is conceivable to manufacture OPS of high quality LWC with 28days compressive
strength of around 45 and 49 MPa and partial dry density of around 1850 and 2000 kg/m3
. Compressive
strength of OPS at 1, 3 and 7 day were 45–67%, 75–80% and 83–92% of the 28 days in OPS high-
quality cement, individually. High quality OPS cements are mostly tend to adequate curing. Base time
of 7 days of normal curing is suggested for this kind of LWC. Water ingestion of OPS high-quality
cement differs from 3.8% to 6.8%, which is in the objective of good concrete (17).
The utilization of OPS total from smashing the bigger unique OPS total can be another technique to
altogether improve the compressive strength of OPS LWC. High workability with 28-day compressive
strength of around 53 MPa can be gotten if there should be an occurrence of OPS LWC. By and large,
the 28-day air-dry thickness and stove dry thickness of pulverized OPS concrete with 28days
compressive strength in the scope of 35–54 MPa, is 17.5% and 20.9% lower than ordinary cement
concrete. By utilizing squashed OPS total it is conceivable to deliver review 30 OPS concrete with
fundamentally bring down bond content. For examination, the roof compressive strength for OPS
cement was seen at an early age (7 days) for unique OPS total. In any case, this conduct was not watched
for smashed OPS total at 28 or 56 days(18).
Despite of the fact that OPS lightweight concrete has a higher dry denstiy than the extended mud
LWC (around 6%), its 28-day compressive strength behaviour, flexural and part rigid qualities are more
prominent than the extended earth LWC by around 45%, 31% and 17%. The effectiveness variable of
OPS LWC is higher than for the extended dirt and ordinary concrete (12).
The expansion of silica smoke incredibly lessens pours and enhances total bond glue interface of the
solid and thus minimizes the acceptance of small scale splits. It is conceivable to deliver OPS with a
28days compressive strength of 55MPa by taking squashed dura (sort of OPS) OPS totals taken from
oil palm trees matured somewhere around 10 and 15 years of age. There is a direct association with high
relationship coefficient between the early age and 28-day compressive strength for OPS produced using
totals of various species and age classification. The water ingestion esteem fluctuates from 4.04 to 6.37%
for all OPS blends, which falls inside the good concrete mix (19).
It is observed that the concrete made with OPS has reduction in weight of around 60% when
compared to normal weight concrete when it is tested in laboratory of around the temperature of 280 C
to 500 C. There is a reduction of weight of the LWC when it is tested for dry partial density at around
the temperature of 260 C which is adequate to use the concrete for construction purpose (20).
When the OPS are used in making of concrete without any replacement the 28days compressive
strength of concrete can be achieved of around 14-38 MPa which is having a dry partial density of 1700-
1990 kg/m3
. The self-compacting concrete can be effectively delivered utilizing OPBC totals and
8. V. Swamy Nadh and K. Muthumani
http://www.iaeme.com/IJCIET/index.asp 259 editor@iaeme.com
molecule pressing technique. The outcomes showed that the blend configuration could be utilized for
OPC as well as for an assortment of mixes of totals. It rations the characteristic assets as well as advances
manageability in saving the earth. (21).
The utilization of GGBS as incomplete bond substitution in the OPS delivered expanded
compressive strength pick up contrasted with OPS with no GGBS over the curing time of 365 days. All
the blends experienced quality decrease of around 55-65% when subjected to warmth presentation of
200˚C. Be that as it may, the expansion in GGBS substitution at 60% was observed to be best in
minimizing the quality misfortune. The water retention of the OPS at 28 and 90days was observed to be
in the scope of 7.5-7.8% and 6.3-7.3%. The OPS with 40% GGBS performed best in lessening the water
ingestion of OPS because of diminishing in porous pores. (22)
The GGBS substitution level and curing condition slightly affected the post-crest flexural sturdiness,
while the expansion of low-volume steel fiber altogether improved the flexural durability of the OPS.
The expansion of 0.6% steel filaments gave more reliable change to the flexural execution of the OPS
contrasted with the expansion of a 0.3% volume division of steel strands. The impact of GGBS
substitution level and curing administration on the anxiety strain relationship of OPS was peripheral,
though the expansion of strands fundamentally expanded the pinnacle strain and most extreme
compressive strain of the solid, showing enhanced toughness.(23)
Table 4 Mechanical characteristic values of oil palm shell.
Specimen details
Water
/cement
ratio
Cement
(kg)
Slump
value
(mm)
Dry
Density
(kg/m3
)
Compressive
Strength
(MPa)
Water
absorption
(%)
Tensile
strength
(MPa)
Young’s
modulus
(GPa)
H.B. BASRI (15) 0.41 1 1472 18-20 23.32
Delsye c.l.teo et
al. (24)
1965 26.3 33 1.82 5.28
Payam shafigh et
al (25)
0.41 480 9mm 1890-1905 22-29 21 2 5-11
Payam shafig et
al. (18)
0.35 550 1927 34-53 20.7 5-7
Payam shafig er
at (26)
190 500 1524 28-36 18.7 2.4-2.64 8.6-13
Payam shafig et
at (12)
158 550 1801-1890 38-44 4.9 5-8
Kim hung mo et
al. (22)
180 550 1850-1965 37-45 6-8 2-3.9
Muhammad
aslam et al. (21)
0.3-0.56 350-450 100mm 19.3-1970 29-37 4-14.29 4-8 9-12.6
Kim humg mo et
al. (23)
168 560 1800-1900 18-24 1.6-2.3 17.4
2.3. Pumice aggregate (PA)
Pumice is a characteristic material got from volcanic starting point delivered by the arrival of gasses
amid the hardening of magma. The smaller scale PA is made by the arrangement of air pockets or air
voids when gasses included in the liquid magma spilling out of volcanoes get to be changed on cooling.
The cells of pumice which is actually happened from volcanic root are extended and parallel to each
other and is some of the time interconnected. Volcanic pumice (VP) can be utilized as total as a part of
the creation of LWC in numerous nations on the planet. In this way, the utilization of pumice was reliant
on the accessibility and constrained to the nations where it is locally accessible or effectively transported
9. Critical Review On Structural Light Weight Concrete
http://www.iaeme.com/IJCIET/index.asp 260 editor@iaeme.com
in. Agreeable solid which is half to 33% lighter than typical cement having great protecting qualities
with high assimilation and shrinkage can be made utilizing VP (27).
Pumice (fig 6) is utilized as a part of auxiliary LWC due to its mechanical properties is closer to
typical weight concrete. Penetrability of cement as observed by Anwar Hossain initial surface absorption
of volcanic pumice concrete is 34% higher that of the NWC, it is also mentioned that VPC can used as
structural lightweight concrete (27). Modulus of elasticity (ME) of VPC is important to consider as the
stiffness of the structure is based on ME value. There is an highly decrease of ME value in the VPC
concrete, as the density plays a major role in the making the structure stiff in which VPC is quite back.
The density of VPC is 1700-1800 kg/m3
.
There is significant effect of VPC while using of admixtures. It improves the workability and
strength of the VPC as there is an increase of density while adding admixtures (3). Grade 2 which has a
particle size of 4-8mm of PA shows better results when compared to Grade 1(smaller than 4mm) and
Grade 3 (8-16mm). Grading curves are used to locate which kind of aggregates sizes can give the
optimum strength and other mechanical properties. Pumice aggregates are used as thermal efficient
material and thermal conductivity of PAC is 2.5-4 times lower than that of NWC (2) . The permeable
structure of pumice concrete is beneficial and acts as a thermal insulating material.
Figure 6 Pumice aggregate
There is an increase of ductility of pumice aggregate and there is an effect of strength characteristics
of PAV when there is an addition of steel fibers in the concrete mix (4).
The use of polypropylene fibers (PP) and steel fibers reduces the risk of segregation of the concrete
and improves the uniformity of the mixture. Inner structure of PAC is examined when PAC is mixed
with polymers. Polymers make the PA filled with the polymers and specific gravity of normal PAC and
PAC coated with polymers varies between 0.68-1.64 g/cm2
, polymers play role in reduction of water
absorption by LWCA (28). Thus for the present study, pumice totals with high water assimilation rate
(30.1-40.5%) were covered with polymer coatings to diminish and deliver lightweight pumice totals
with low water ingestion rate (2–10%). It was finished up as an after effect of the present study that
LWC to be fabricated from such totals in non-forced fluid media and has bring down corrosion dude to
their not very high pressure resistance.
2.3.Scoria lightweight aggregates
High-strength light weight aggregates made with scoria and containing mineral admixtures can be
used as a structural application in constructions (fig 7). Concrete made with these aggregates shows
compressive strength up to 40 MPa by the use of silica fumes as replacement. Alaettin kilic et al., (29)
shows the use of scoria aggregates gives appropriate results when admixtures are used as replacement
of cement content. They considered fly ash and silica fumes replacement of cement content; different
mix proportions are made to find the adequate results. Replacement of cement content with 100 kg of
fly ash and 50 kg of silica fumes shown compressive strength up to 40 MPa for 28days.
10. V. Swamy Nadh and K. Muthumani
http://www.iaeme.com/IJCIET/index.asp 261 editor@iaeme.com
Payam shafigh et al., (30) shows the mechanical and micro structural properties of lightweight
aggregate concrete containing limestone and high volume of fly ash reduces the cost of construction and
disposal of waste. Replacement of cement content with fly ash decrease the strength properties and
replacement of fine aggregate with limestone powder affects the strength of the concrete and shows
adequate results. Oil palm shell and crushed granite is used as an coarse aggregate, oven dry density is
about 1650-1900 kg/m3
, compressive strength of lightweight aggregates concrete shows 45 MPa when
no replacement is done (30) (31).
Table 5 Mechanical properties of pumice aggregate
Author
water/cement
ratio
Cement
(kg)
Slump
value
(mm)
Partial dry
Density
(kg/m3 )
Compressive
Strength
(N/mm2)
Water
absorption
(%)
Young’s
modulus
(GPa)
K.M. anwar
hossain et al.
(27)
0.45 490 64 1183 20-24 37 10-12
D.Sari et al.
(3)
0.61 250 - 1000-1150 5 20.58 10.39
L.Gunduz et
al. (32)
0.64 440 35-40 1400-1480 20-26 13.7-19.6 10.3-11.1
L.gunduz (2) 0.88 540 40-45 1376 9-14 12-26 7-11
Nicolas Ali
Libre et al.
(4)
0.60 450 30 1880 26.5 15-18 11-15
Ozlem salli
bideci et al .
(28)
1100-1300 43.1-48.2
Figure 7 Scoria aggregates
3. CONCLUSIONS
• As the lightweight aggregates had low density than normal weight concrete, choosing of such lightweight
aggregates in structural point of view is a good initiative.
11. Critical Review On Structural Light Weight Concrete
http://www.iaeme.com/IJCIET/index.asp 262 editor@iaeme.com
• As per the review there are so many lightweight aggregates that can achieve the structural properties but
moisture content place a major role.
• The compressive strength of oil palm shell gives more strength when compared to all other aggregates.
• Silica fumes are added to decrease the pores in the concrete and to make concrete to better.
• Micro structural analysis has to be made to make the grain boundaries to bond between the C-S-H gel
and the aggregates.
• Moisture related problems are same in all the lightweight aggregates, reduction can be made by adding
silica as replacement of cement.
• Selection of lightweight aggregates depends on the selection of construction.
• Light weight aggregate can be used as structural, Non Structural and infill also.
REFERENCES
[1] Composites C. A novel material for lightweight concrete production. cement and concrete
composites.2009;35:(August 2016).
[2] Centre A. The effects of different fine and coarse pumice aggregate / cement ratios on the structural
concrete properties without using any admixtures. 2005;35:1859–64.
[3] Sari D, Pasamehmetoglu AG. The effects of gradation and admixture on the pumice lightweight
aggregate concrete. Cement and Concrete Research. 2005;35(5):936–42.
[4] Ali N, Shekarchi M, Mahoutian M, Soroushian P. Mechanical properties of hybrid fiber reinforced
lightweight aggregate concrete made with natural pumice. Constr Build Mater [Internet].
2011;25(5):2458–64. Available from: http://dx.doi.org/10.1016/j.conbuildmat.2010.11.058
[5] Dilli ME, Atahan HN, Cengiz S, Faculty CE. A comparison of strength and elastic properties between
conventional and lightweight structural concretes designed with expanded clay aggregates.
2015;101:260–7.
[6] Desai D. Development Of Light Weight Concrete.Engineeringcivil.com [Internet] :1–15.
[7] Suba S. The effects of using fly ash on high strength lightweight concrete produced with expanded
clay aggregate. 2009;4(4):275–88.
[8] Moores G, Yorkshire N. Lightweight aggregate. 2008:[Internet] 46-47 p.
[9] Hoff GC. Guide for the Use of Low-Density Concrete in Civil Works Projects Geotechnical and
Structures. 2002;[Internet];(August).
[10] Ardakani A, Yazdani M. The relation between particle density and static elastic moduli of lightweight
expanded clay aggregates. Applied Clay Science [Internet].2014;93–94:28–34.
[11] Ya S, Fadeev AS, Samohvalov O V. Defining limit values of temperature field in typical sections of
a rotary kiln producing expanded clay at a given density. Procedia Eng [Internet].
2015;111(TFoCE):233–5. Available from: http://dx.doi.org/10.1016/j.proeng.2015.07.082
[12] Shafigh P, Ghafari H, Mahmud H Bin, Jumaat MZ. A comparison study of the mechanical properties
and drying shrinkage of oil palm shell and expanded clay lightweight aggregate concretes. Mater Des
[Internet]. 2014;60:320–7.
[13] Bogas JA, Gomes A, Pereira MFC. Self-compacting lightweight concrete produced with expanded
clay aggregate. Construction and Building Materials [Internet]. 2012;35:1013–22. Available from:
http://dx.doi.org/10.1016/j.conbuildmat.2012.04.111
[14] Bogas JA, Brito J De, Cabaço J. Long-term behaviour of concrete produced with recycled lightweight
expanded clay aggregate concrete. Constr Build Mater [Internet]. 2014;65:470–9.
[15] Basri HB, Mannan MA, Zain MFM. Concrete using waste oil palm shells as aggregate. 1999;29:619–
22.
[16] Mannan MA, Ganapathy CU. Engineering properties of concrete with oil palm shell as coarse
aggregate. construction and building materials 2002;16:29-34.
12. V. Swamy Nadh and K. Muthumani
http://www.iaeme.com/IJCIET/index.asp 263 editor@iaeme.com
[17] Shafigh P, Jumaat MZ, Mahmud H. Oil palm shell as a lightweight aggregate for production high
strength lightweight concrete. Construction and Building Materials [Internet]. 2011;25(4):1848–53.
[18] Shafigh P, Jumaat MZ, Mahmud H Bin, Alengaram UJ. A new method of producing high strength
oil palm shell lightweight concrete. Mater Materials and Design [Internet]. 2011;32(10):4839–43.
[19] Yew MK, Mahmud H Bin, Ang BC, Yew MC. Effects of Oil Palm Shell Coarse Aggregate Species
on High Strength Lightweight Concrete. ?e Scientific World Journal.Volume 2014, Article ID
387647, 12 pages. Research 2014;2014.
[20] Jumaat MZ, Alengaram UJ, Ahmmad R, Bahri S, Islam ABMS. Characteristics of palm oill clinker
as replacement for oil palm shell in lightweight concrete subjected to elevated temperature.
2015;101:942–51.
[21] Aslam M, Sha P, Zamin M. Oil-palm by-products as lightweight aggregate in concrete mixture : a
review. 2016;126.
[22] Hung K, Alengaram UJ, Zamin M, Yong M, Liu J, Lim J. Assessing some durability properties of
sustainable lightweight oil palm shell concrete incorporating slag and manufactured sand. Journal of
Cleaner Production [Internet]. 2016;112:763–70.
[23] Mo KH, Chin TS, Alengaram UJ, Jumaat MZ. Material and structural properties of waste-oil palm
shell concrete incorporating ground granulated blast-furnace slag reinforced with low-volume steel
fibres. Journal of Cleaner Production [Internet]. 2016;133:414–26.
[24] Teo DCL, Mannan MA, Kurian J V. Flexural Behaviour of Reinforced Lightweight Concrete Beams
Made with Oil Palm Shell (OPS). Journal of Advanced Concrete Technology. 2006;4(3):459–68.
[25] Shafigh P, Jumaat MZ, Mahmud H. Mix design and mechanical properties of oil palm shell
lightweight aggregate concrete : A review. international journal of the physics sciences:
2010;5(14):2127–34.
[26] Sha P, Bin H, Zamin M, Jumaat B, Ahmmad R, Bahri S. Structural lightweight aggregate concrete
using two types of waste from the palm oil industry as aggregate. 2014;80:187–96.
[27] Hossain KMA. Properties of volcanic pumice based cement and lightweight concrete.
2004;34(August 2003):283–91.
[28] Salli Ö, Bideci A, Haydar A, Oymael S, Yildirim H. Composites : Part B Polymer coated pumice
aggregates and their properties. Composites Part B [Internet]. 2014;67:239–43.
[29] Atis CD. High-strength lightweight concrete made with scoria aggregate containing mineral
admixtures.Cement and concrete Research: 2003;33:1595–9.
[30] Sha P, Nomeli MA, Alengaram UJ, Bin H. Engineering properties of lightweight aggregate concrete
containing limestone powder and high volume fly ash. Journal of cleaner production: 2016;135:148–
57.
[31] Munagala Sreenivasulu Reddy and Suvarna P., A Detailed Study on Reclaimed Asphalt Pavement in
Pavement Quality Cement Concrete. International Journal of Civil Engineering and Technology,
7(5), 2016, pp.382 –392.
[32] A Review on Fiber Reinforced Concrete, Grija.S, Shanthini.D, Abinaya.S. International Journal of
Civil Engineering and Technology, 7(6), 2016, pp.386–392.
[33] Dr. Javed Ahmed Naqash, Ifrah Habib Lone, Amir Majid, Bisma Gayas, Itret Hussaini and Mubashir
Hassan, Accelerating Admixture “Rapidite”-Its Effect on Properties of Concrete. International
Journal of Civil Engineering and Technology, 6(12), 2015, pp. 58-65.
[34] Teo DCL, Mannan MA, Kurian VJ, Program CE. Structural Concrete Using Oil Palm Shell ( OPS )
as Lightweight. journal of advanced concrete technolog: 2006;30:251–7.
[35] Gündüz L. The effects of pumice aggregate/cement ratios on the low-strength concrete properties.
Constrruction and Building Materials. 2008;22(5):721–8.