Ian schmahmann hawk eye-800 presentation 3
•Download as PPTX, PDF•
0 likes•607 views
Ian Schmahmann gave a presentation on Wave Industries' Hawk-Eye 800 monitoring and control system. The Hawk-Eye 800 provides real-time HVACR system monitoring, automation, energy efficiency improvements, and remote access capabilities. It has various inputs and outputs that can monitor temperatures, pressures, power usage, and other values. Alarms notify users of issues, and the system can provide automated reports and trend data. Customers benefit from cost savings through energy reductions, improved compliance, increased profits, and reduced service calls and downtime.
Report
Share
Report
Share
Recommended
Automatic temp controller
The document describes a microcontroller-based temperature controller that uses an Atmel 89C52 microcontroller, DS1621 temperature sensor IC, LCD display, and matrix keyboard. It displays the temperature from -55°C to 125°C in digital form after calibrating the data. The program for the microcontroller is written in assembly language. It provides details on the components, features of the temperature sensor IC, and instructions to read temperature and configure the sensor.
CAREL cold room & convenience store solutions
CAREL offers complete high efficiency solutions for both Cold rooms and Convenience Stores, to prevent energy wastage and improve efficiency. In this presentation Gabriele Savio, CAREL Application Sales Engineer, illustrates all the unique features of these solutions.
Vietnam vision 2
This document provides information on the features and capabilities of ABB Metering Systems including tariff structures, load profile data collection and storage, instrumentation, communications options, and available modules for inputs, outputs, communications, and RS232 connections. Key features include support for 16 time of use registers, 8 maximum demand registers, 12 seasons, 96 switching times, 450 days of load profile data collection in 30 minute intervals, voltage, current, power measurements per phase and system, local and remote reading, 9,600 baud communications, and hot-swappable input/output modules that do not affect device certification.
Tlc esta
The document describes a study testing a Temperature Limit Controller (TLC) device that can be installed in existing air conditioning units to limit temperature settings and save energy without disturbing users. The TLC was tested over 6 months in 4 departments, showing an average 40% reduction in compressor run time and corresponding energy savings. Calculations estimate the TLC would save over $100,000 annually if installed in all 7,000 A/C units at a plant, with a return on investment within 8 months.
HGCM System2
This document describes a SCADA project for monitoring and collecting data from hard gelatin capsule machines. The project involves connecting an Allen-Bradley PLC to record machine parameters like temperature, humidity and production data. Microsoft Excel is used as the SCADA interface to display real-time data trends, alarms and reports for remote monitoring by management and engineers. The objectives are to reduce manual data collection, track machine performance and faults for maintenance scheduling.
High Efficiency Solutions EEV & Monitoring Systems
CAREL's Giorgio Fontana illustrates at REF and HVAC Indonesia Expo the benefits of CAREL Electronic Expansion Valves
Energy saving esta
This document discusses energy saving strategies for air conditioning and lighting systems in public buildings. It details tests conducted that show significant potential savings from utilizing occupancy sensors, temperature limit controllers, and advanced room controllers. On average, occupancy sensors reduced unnecessary lighting usage by 40% while temperature limit controllers cut AC usage by 40%. Room controllers provide full control of AC units, lighting, CO2 sensors, and programming for maximum efficiency and savings. Overall, implementing smart control systems can significantly reduce a building's electrical usage and energy expenses.
Kamstrup & Landis Gyr BTU Meter
We are Pleased to introduce our company ZEN TRANSTECH as leading Solution & Service Provider for Commercial & Industrial HVAC SYSTEMS . Please refer attached our company profile for your reference. It will help you in your Upcoming project & other requirement
Recommended
Automatic temp controller
The document describes a microcontroller-based temperature controller that uses an Atmel 89C52 microcontroller, DS1621 temperature sensor IC, LCD display, and matrix keyboard. It displays the temperature from -55°C to 125°C in digital form after calibrating the data. The program for the microcontroller is written in assembly language. It provides details on the components, features of the temperature sensor IC, and instructions to read temperature and configure the sensor.
CAREL cold room & convenience store solutions
CAREL offers complete high efficiency solutions for both Cold rooms and Convenience Stores, to prevent energy wastage and improve efficiency. In this presentation Gabriele Savio, CAREL Application Sales Engineer, illustrates all the unique features of these solutions.
Vietnam vision 2
This document provides information on the features and capabilities of ABB Metering Systems including tariff structures, load profile data collection and storage, instrumentation, communications options, and available modules for inputs, outputs, communications, and RS232 connections. Key features include support for 16 time of use registers, 8 maximum demand registers, 12 seasons, 96 switching times, 450 days of load profile data collection in 30 minute intervals, voltage, current, power measurements per phase and system, local and remote reading, 9,600 baud communications, and hot-swappable input/output modules that do not affect device certification.
Tlc esta
The document describes a study testing a Temperature Limit Controller (TLC) device that can be installed in existing air conditioning units to limit temperature settings and save energy without disturbing users. The TLC was tested over 6 months in 4 departments, showing an average 40% reduction in compressor run time and corresponding energy savings. Calculations estimate the TLC would save over $100,000 annually if installed in all 7,000 A/C units at a plant, with a return on investment within 8 months.
HGCM System2
This document describes a SCADA project for monitoring and collecting data from hard gelatin capsule machines. The project involves connecting an Allen-Bradley PLC to record machine parameters like temperature, humidity and production data. Microsoft Excel is used as the SCADA interface to display real-time data trends, alarms and reports for remote monitoring by management and engineers. The objectives are to reduce manual data collection, track machine performance and faults for maintenance scheduling.
High Efficiency Solutions EEV & Monitoring Systems
CAREL's Giorgio Fontana illustrates at REF and HVAC Indonesia Expo the benefits of CAREL Electronic Expansion Valves
Energy saving esta
This document discusses energy saving strategies for air conditioning and lighting systems in public buildings. It details tests conducted that show significant potential savings from utilizing occupancy sensors, temperature limit controllers, and advanced room controllers. On average, occupancy sensors reduced unnecessary lighting usage by 40% while temperature limit controllers cut AC usage by 40%. Room controllers provide full control of AC units, lighting, CO2 sensors, and programming for maximum efficiency and savings. Overall, implementing smart control systems can significantly reduce a building's electrical usage and energy expenses.
Kamstrup & Landis Gyr BTU Meter
We are Pleased to introduce our company ZEN TRANSTECH as leading Solution & Service Provider for Commercial & Industrial HVAC SYSTEMS . Please refer attached our company profile for your reference. It will help you in your Upcoming project & other requirement
day 3: Control Concepts & BMS
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Re-innovating the CO2 transcritical efficiency for small and medium formats
The document discusses innovations in CO2 refrigeration systems for small and medium formats to improve energy efficiency. It describes new technologies using inverter-driven DC compressors and modulating ejectors that allow for continuous capacity modulation. This matches the cooling capacity more precisely to demand and reduces on/off cycling. Field data shows these systems can achieve 5-18% energy savings over conventional AC compressor systems, with up to 15% expected annual savings. The new systems also have benefits of using natural CO2 refrigerant, high efficiency even at partial loads, compact size, and ease of use. Continuous modulation is presented as an opportunity to further the use of CO2 technology in more applications in a cost-effective and sustainable way.
Predictive maintenance of an intelligent FCU
This document discusses predictive maintenance of an intelligent fan coil unit. An intelligent fan coil unit has additional sensors beyond standard units, including air velocity sensors and inlet/outlet water coil temperature sensors. Predictive maintenance of the intelligent unit monitors delta T, approach temperature, and temperature cross of the coil to check performance. It also monitors air filter life. This strategy aims to reduce maintenance costs and time by 67% or more by scheduling maintenance only when needed based on sensor data.
Calibration introduction
MECHANICAL -Pressure, Mass, Volume, Torque, Sound, Force, Hardness
ELECTRO-TECHNICAL -AC/DC Voltage, AC/DC Current, Resistance, LCR, Frequency, Power Factor, Temperature Simulation
THERMAL -Temperature (-80 C to 1200 C), Humidity
These all are our specialties in Sigma Test & Research Centre Calibration's lab(link this word to http://www.sigmatest.org/calibration.html). Kindly visit our web page also for more clarity on the calibration topic.
Charge Bliss Cloud Services v2.0
This document describes the various cloud-based energy monitoring and demand response services provided by Charge Bliss, including multi-site and individual location dashboards showing energy usage over 72 hours, advanced energy cost analysis across sites and devices, real-time monitoring of devices like lighting panels and HVAC systems, demand control that responds to signals and limits peak usage, analysis of demand and load shifting events, parametric monitoring of loads and HVACs to detect issues, and integration of generation sources like solar with net metering and demand limiting.
Your permit office and ACCA Manual J, S and D
Occupant satisfaction is the main objective of any Quality HVAC Design. Primary factors impacting occupant satisfaction include: temperature and humidity control, air motion in room, energy efficient operation, adequate ventilation for good indoor air quality and proper zoning. To maximize occupant satisfaction, make sure the equipment is the correct size and the air distribution system is properly designed and installed. For residential applications ACCA Manual J, S & D are the only procedures recognized by ANSI and residential building codes.
ENERGY AUDIT
An energy audit is conducted to identify opportunities to reduce energy use in buildings, processes, or systems. The document outlines the process for conducting energy audits including: on-site inspections of critical equipment and data collection using various meters; 24-hour power monitoring; equipment and lighting surveys; and HVAC system analysis. Recommendations are provided to management following data analysis to lower energy consumption without negatively impacting operations which are then reviewed periodically.
I Work for free
This document discusses strategies for reducing energy costs in a data center by making adjustments to temperature and humidity settings without requiring new technology or expenses. Some key points:
- Increasing temperature settings on cooling equipment by 1-4 degrees can reduce power consumption by 4% per degree and save on costs.
- Humidity levels should be kept between 45-55% to avoid condensation issues; adjusting settings can reduce humidity and costs.
- Past projects involved increasing temperature setpoints on cooling equipment, adjusting humidity settings, implementing lighting schedules and motion sensors, and reducing the number of cooling units running to lower energy use.
- Further planned strategies involve optimizing chiller plant operations, lowering differential temperatures, implementing heating lockouts and
Hecu – high energy efficiency solution for condensing units fitted with DC co...
Hecu – high energy efficiency solution for condensing units fitted with DC co...CAREL Industries S.p.A
Hecu Sistema is the CAREL solution for commercial refrigeration, designed for high energy efficiency condensing units that use either traditional HFC refrigerants or natural refrigerants such as CO2.
The system’s distinctive features include the use of DC inverter technology and real-time synchronisation with the refrigeration units. Hecu sistema meets the requirements of the latest environmental sustainability standards relating to energy consumption (Eco-design directive) and the use of low GWP refrigerants (F-Gas regulation). Stable control means high-quality food preservation and a drastic reduction in waste.
Hecu sistema is also compatible with all CAREL supervisors, which can monitor each individual system or groups of systems, and offer dashboards to simplify interpretation and analysis of system operation.HVAC, Heating Ventilation Air Conditioning BMS
The main purpose of HVAC is to provide the people working inside the building with “CONDITIONED AIR” so that they will have a comfortable and safe work environment.
A BMS system collects the operating information required for intelligent building management.
It analyses the operation of the building systems by viewing all important temperatures, humidities and equipment status.
To:
Ensures energy savings
Improves building operations
Improves building operations allowing remote control/over-ride where necessary
Improves building management by means reporting and traceability
Improves building management by means reporting and traceability
Improves building management by having a faster reaction time to problems
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...NIHON DENKEI SINGAPORE
This application provides a method for wirelessly capturing actinometer and temperature data at the desired timing during measurement.
Record the output from an actinometer or calibrated sunlight sensor (compact module) and a thermocouple using the Wireless Voltage/Temp Logger LR8515. Use the captured data correcting IV curves and other maintenance and preventive work.
Since there’s no need to connect to an IV curve measuring instrument or other device, bothersome wiring is eliminatedBMS Design (BAS-Building Automation System)
This document provides an overview of building automation systems (BAS) and their components. It describes the main point types in a BAS including analog, digital, and metering. It also outlines common input and output examples. The document discusses the software used to define the control strategy. Additionally, it shows a typical air handling unit plant layout and components. Finally, it reviews outstation and module options for collecting data from the field level.
Lcp hybrid –_effi_cient_performance_with_heat_pipe_technology
The document describes Rittal's LCP Hybrid liquid cooling system. It combines heat pipe technology with a large cold water heat exchanger surface to provide efficient cooling of server racks. The LCP Hybrid replaces a rack's rear door, connecting to an existing cold water circuit to regulate the rack's climate without requiring additional fans. It distributes heat evenly across the heat exchanger surface for maximum efficiency and energy savings. The LCP Hybrid is easily installed, provides full rack access, and problem-free water connections.
Handheld Digital Manometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Commercial CO2 refrigeration - A Japanese experience
Katsunori Shibata talked about the new CO2 installations such as the recent one in Osaka and explained the performance of the booster system with four compressors, perfectly equipped for low temperature applications.
Dwyer's Digital Manometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
LogiCool Inrak Data Centre Cooling 10-60kW
LogiCool InRak Data Centre Cooling 10-60kW: Highly efficient and resilient
The LogiCool InRak is an efficient in-row cooling solution for high density data centre applications. Positioned next to a rack or within a row of server cabinets, the InRak directs air horizontally to the front of the server racks. The InRak delivers complete confidence, with in-built resilience and excellent efficiencies, lifting the InRak’s EER to 90.3 during part load operation.
Providing industry-leading cooling for its footprint, the InRak offers the ultimate in scalable solutions for the modern data centre. It includes a top connection for rooms without a floor void and delivers even greater efficiency when combined with Airedale’s latest technology free-cooling chillers.
Dwyer's Air Balancing Tools: Mobile Meter Software App, UHH2, & Probes
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
A Smart Landfill Gas Control System Design to Optimize ROI & Performance
Landfill gas operators with many pieces of equipment understand it’s challenging to have complete visibility and ensure maximum uptime. Learn how to design your plant control system for maximum ROI by utilizing a scalable and comprehensive SCADA system, and specifying the right data points for real-time and historical analysis.
By analyzing data and properly configuring alarms and alerts, owners can properly prioritize maintenance, optimize operations, and proactively identify potential problems to ultimately exceed expected plant performance.
By viewing the SCADA system as an information system, Affinity Energy can provide owners and operators with the tools to achieve a higher rate of return on their automation investment.
Learn more http://affinityenergy.com
Power Brochure
This document describes several products from Vaisala that are used to measure environmental conditions and moisture levels in power industry applications. It discusses sensors for measuring moisture in turbine inlet air, humidity in hazardous areas, outdoor weather conditions, moisture in transformer oil and lubricating oils, dewpoint in SF6 gas and other gases, and online measurements for switchgear. The products are designed for low maintenance use in power facilities and provide real-time monitoring and trend data to help avoid equipment issues.
Bms system basic
A BMS consultant document discusses inputs and outputs for building management systems. It describes various sensors like temperature, humidity, pressure, and flow sensors that provide inputs. It also discusses output devices like control valves, VFD speed commands, and damper actuators. The document provides details on common sensor types, proper installation of sensors, and BMS protocols.
Bmssystem basic-141229052438-conversion-gate02
This document provides an overview of building management systems (BMS) and instrumentation basics. It discusses various inputs and outputs to BMS controllers like temperature, humidity, and pressure sensors. It describes common field devices used for sensing including thermistors, pressure switches, and flow meters. The document also covers BMS protocols, system architecture, typical components in a BMS bill of quantities, and considerations for BMS design and commissioning.
More Related Content
What's hot
day 3: Control Concepts & BMS
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Re-innovating the CO2 transcritical efficiency for small and medium formats
The document discusses innovations in CO2 refrigeration systems for small and medium formats to improve energy efficiency. It describes new technologies using inverter-driven DC compressors and modulating ejectors that allow for continuous capacity modulation. This matches the cooling capacity more precisely to demand and reduces on/off cycling. Field data shows these systems can achieve 5-18% energy savings over conventional AC compressor systems, with up to 15% expected annual savings. The new systems also have benefits of using natural CO2 refrigerant, high efficiency even at partial loads, compact size, and ease of use. Continuous modulation is presented as an opportunity to further the use of CO2 technology in more applications in a cost-effective and sustainable way.
Predictive maintenance of an intelligent FCU
This document discusses predictive maintenance of an intelligent fan coil unit. An intelligent fan coil unit has additional sensors beyond standard units, including air velocity sensors and inlet/outlet water coil temperature sensors. Predictive maintenance of the intelligent unit monitors delta T, approach temperature, and temperature cross of the coil to check performance. It also monitors air filter life. This strategy aims to reduce maintenance costs and time by 67% or more by scheduling maintenance only when needed based on sensor data.
Calibration introduction
MECHANICAL -Pressure, Mass, Volume, Torque, Sound, Force, Hardness
ELECTRO-TECHNICAL -AC/DC Voltage, AC/DC Current, Resistance, LCR, Frequency, Power Factor, Temperature Simulation
THERMAL -Temperature (-80 C to 1200 C), Humidity
These all are our specialties in Sigma Test & Research Centre Calibration's lab(link this word to http://www.sigmatest.org/calibration.html). Kindly visit our web page also for more clarity on the calibration topic.
Charge Bliss Cloud Services v2.0
This document describes the various cloud-based energy monitoring and demand response services provided by Charge Bliss, including multi-site and individual location dashboards showing energy usage over 72 hours, advanced energy cost analysis across sites and devices, real-time monitoring of devices like lighting panels and HVAC systems, demand control that responds to signals and limits peak usage, analysis of demand and load shifting events, parametric monitoring of loads and HVACs to detect issues, and integration of generation sources like solar with net metering and demand limiting.
Your permit office and ACCA Manual J, S and D
Occupant satisfaction is the main objective of any Quality HVAC Design. Primary factors impacting occupant satisfaction include: temperature and humidity control, air motion in room, energy efficient operation, adequate ventilation for good indoor air quality and proper zoning. To maximize occupant satisfaction, make sure the equipment is the correct size and the air distribution system is properly designed and installed. For residential applications ACCA Manual J, S & D are the only procedures recognized by ANSI and residential building codes.
ENERGY AUDIT
An energy audit is conducted to identify opportunities to reduce energy use in buildings, processes, or systems. The document outlines the process for conducting energy audits including: on-site inspections of critical equipment and data collection using various meters; 24-hour power monitoring; equipment and lighting surveys; and HVAC system analysis. Recommendations are provided to management following data analysis to lower energy consumption without negatively impacting operations which are then reviewed periodically.
I Work for free
This document discusses strategies for reducing energy costs in a data center by making adjustments to temperature and humidity settings without requiring new technology or expenses. Some key points:
- Increasing temperature settings on cooling equipment by 1-4 degrees can reduce power consumption by 4% per degree and save on costs.
- Humidity levels should be kept between 45-55% to avoid condensation issues; adjusting settings can reduce humidity and costs.
- Past projects involved increasing temperature setpoints on cooling equipment, adjusting humidity settings, implementing lighting schedules and motion sensors, and reducing the number of cooling units running to lower energy use.
- Further planned strategies involve optimizing chiller plant operations, lowering differential temperatures, implementing heating lockouts and
Hecu – high energy efficiency solution for condensing units fitted with DC co...
Hecu – high energy efficiency solution for condensing units fitted with DC co...CAREL Industries S.p.A
Hecu Sistema is the CAREL solution for commercial refrigeration, designed for high energy efficiency condensing units that use either traditional HFC refrigerants or natural refrigerants such as CO2.
The system’s distinctive features include the use of DC inverter technology and real-time synchronisation with the refrigeration units. Hecu sistema meets the requirements of the latest environmental sustainability standards relating to energy consumption (Eco-design directive) and the use of low GWP refrigerants (F-Gas regulation). Stable control means high-quality food preservation and a drastic reduction in waste.
Hecu sistema is also compatible with all CAREL supervisors, which can monitor each individual system or groups of systems, and offer dashboards to simplify interpretation and analysis of system operation.HVAC, Heating Ventilation Air Conditioning BMS
The main purpose of HVAC is to provide the people working inside the building with “CONDITIONED AIR” so that they will have a comfortable and safe work environment.
A BMS system collects the operating information required for intelligent building management.
It analyses the operation of the building systems by viewing all important temperatures, humidities and equipment status.
To:
Ensures energy savings
Improves building operations
Improves building operations allowing remote control/over-ride where necessary
Improves building management by means reporting and traceability
Improves building management by means reporting and traceability
Improves building management by having a faster reaction time to problems
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...NIHON DENKEI SINGAPORE
This application provides a method for wirelessly capturing actinometer and temperature data at the desired timing during measurement.
Record the output from an actinometer or calibrated sunlight sensor (compact module) and a thermocouple using the Wireless Voltage/Temp Logger LR8515. Use the captured data correcting IV curves and other maintenance and preventive work.
Since there’s no need to connect to an IV curve measuring instrument or other device, bothersome wiring is eliminatedBMS Design (BAS-Building Automation System)
This document provides an overview of building automation systems (BAS) and their components. It describes the main point types in a BAS including analog, digital, and metering. It also outlines common input and output examples. The document discusses the software used to define the control strategy. Additionally, it shows a typical air handling unit plant layout and components. Finally, it reviews outstation and module options for collecting data from the field level.
Lcp hybrid –_effi_cient_performance_with_heat_pipe_technology
The document describes Rittal's LCP Hybrid liquid cooling system. It combines heat pipe technology with a large cold water heat exchanger surface to provide efficient cooling of server racks. The LCP Hybrid replaces a rack's rear door, connecting to an existing cold water circuit to regulate the rack's climate without requiring additional fans. It distributes heat evenly across the heat exchanger surface for maximum efficiency and energy savings. The LCP Hybrid is easily installed, provides full rack access, and problem-free water connections.
Handheld Digital Manometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2014 Dwyer Instruments, Inc.
Commercial CO2 refrigeration - A Japanese experience
Katsunori Shibata talked about the new CO2 installations such as the recent one in Osaka and explained the performance of the booster system with four compressors, perfectly equipped for low temperature applications.
Dwyer's Digital Manometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
LogiCool Inrak Data Centre Cooling 10-60kW
LogiCool InRak Data Centre Cooling 10-60kW: Highly efficient and resilient
The LogiCool InRak is an efficient in-row cooling solution for high density data centre applications. Positioned next to a rack or within a row of server cabinets, the InRak directs air horizontally to the front of the server racks. The InRak delivers complete confidence, with in-built resilience and excellent efficiencies, lifting the InRak’s EER to 90.3 during part load operation.
Providing industry-leading cooling for its footprint, the InRak offers the ultimate in scalable solutions for the modern data centre. It includes a top connection for rooms without a floor void and delivers even greater efficiency when combined with Airedale’s latest technology free-cooling chillers.
Dwyer's Air Balancing Tools: Mobile Meter Software App, UHH2, & Probes
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
A Smart Landfill Gas Control System Design to Optimize ROI & Performance
Landfill gas operators with many pieces of equipment understand it’s challenging to have complete visibility and ensure maximum uptime. Learn how to design your plant control system for maximum ROI by utilizing a scalable and comprehensive SCADA system, and specifying the right data points for real-time and historical analysis.
By analyzing data and properly configuring alarms and alerts, owners can properly prioritize maintenance, optimize operations, and proactively identify potential problems to ultimately exceed expected plant performance.
By viewing the SCADA system as an information system, Affinity Energy can provide owners and operators with the tools to achieve a higher rate of return on their automation investment.
Learn more http://affinityenergy.com
Power Brochure
This document describes several products from Vaisala that are used to measure environmental conditions and moisture levels in power industry applications. It discusses sensors for measuring moisture in turbine inlet air, humidity in hazardous areas, outdoor weather conditions, moisture in transformer oil and lubricating oils, dewpoint in SF6 gas and other gases, and online measurements for switchgear. The products are designed for low maintenance use in power facilities and provide real-time monitoring and trend data to help avoid equipment issues.
What's hot (20)
Re-innovating the CO2 transcritical efficiency for small and medium formats
Re-innovating the CO2 transcritical efficiency for small and medium formats
Hecu – high energy efficiency solution for condensing units fitted with DC co...
Hecu – high energy efficiency solution for condensing units fitted with DC co...
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...
HIOKI Application: Measure Insolation and Temperature Wirelessly when Testing...
Lcp hybrid –_effi_cient_performance_with_heat_pipe_technology
Lcp hybrid –_effi_cient_performance_with_heat_pipe_technology
Commercial CO2 refrigeration - A Japanese experience
Commercial CO2 refrigeration - A Japanese experience
Dwyer's Air Balancing Tools: Mobile Meter Software App, UHH2, & Probes
Dwyer's Air Balancing Tools: Mobile Meter Software App, UHH2, & Probes
A Smart Landfill Gas Control System Design to Optimize ROI & Performance
A Smart Landfill Gas Control System Design to Optimize ROI & Performance
Similar to Ian schmahmann hawk eye-800 presentation 3
Bms system basic
A BMS consultant document discusses inputs and outputs for building management systems. It describes various sensors like temperature, humidity, pressure, and flow sensors that provide inputs. It also discusses output devices like control valves, VFD speed commands, and damper actuators. The document provides details on common sensor types, proper installation of sensors, and BMS protocols.
Bmssystem basic-141229052438-conversion-gate02
This document provides an overview of building management systems (BMS) and instrumentation basics. It discusses various inputs and outputs to BMS controllers like temperature, humidity, and pressure sensors. It describes common field devices used for sensing including thermistors, pressure switches, and flow meters. The document also covers BMS protocols, system architecture, typical components in a BMS bill of quantities, and considerations for BMS design and commissioning.
Catalog Biến tần Frenic-HVAC (Fuji Electric)
Catalog Frenic-HVAC (Fuji Electric): Biến tần Frenic-HVAC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Best practices for food service applications
This document discusses Secop's journey towards more sustainable refrigeration technologies. It outlines their transition from HFC refrigerants like R404A to natural refrigerants like propane (R290) and the optimization of systems through variable speed compressor technology. The document describes case studies of converting a commercial freezer from R404A to R290 and further improving it with a variable speed compressor. It also discusses Secop's optimized simulation-based approach to development that reduces testing time and costs compared to traditional methods. Finally, it provides a brief overview of Secop's portfolio and experience in refrigeration.
High Efficiency Solutions for process cooling
Marco Piovan, Sales & Marketing HVAC Application Manager and Matteo Venturi, Sales & Marketing Application Specialist at Chillventa eSpecial 2020. NEW uChiller for process chiller and use of Chillbooster for condenser and liquid coolers for industrial applications.
Know more: carel.com/product/mchiller-process
Energy audit & conservation studies for commercial premises
This document provides an overview of the scope and instruments used for an energy audit of commercial premises conducted by Senergy Consultants. The energy audit evaluates energy performance, bills, equipment efficiency, lighting, air quality, and distribution systems. It analyzes the energy index, bills, power quality, thermal images, consumption profiles, and recommends improvements to recover waste energy and switch to cheaper fuels to reduce costs. Key performance indicators like specific power consumption and pump efficiency are calculated. The goal is to identify savings through optimization and use of renewable energy.
11901621030_Digital control System_Priyashree Nandi.pdf
A digital controller receives input signals measuring properties like impedance, compares the actual values to targets, and sends control signals to adjust components accordingly. It works by measuring the actual state of a device, comparing it to the target state, and taking action to stop or allow heating as needed. Digital controllers offer advantages like flexibility, inexpensive implementation using microcontrollers, and resistance to environmental impacts compared to analog controllers. They are commonly used in industrial heating systems to stably control temperature within safety limits.
The importance of energy efficiency in RAC
The importance of energy efficiency in RAC and documentation of performance in the field (Klas Berglof, Consultant).
Frenic hvac catalog
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
VAV Controls_NEP 2017_Rev1.pptx
This company was established in 1976 and designs and manufactures innovative HVAC products. It has its 80,000 square foot headquarters and manufacturing facility located in Montreal, Canada with over 250 dedicated employees. It has worldwide presence through office locations in Montreal, Oregon, Dubai, Singapore and a worldwide distribution network. The entire manufacturing chain from research and development to packaging and shipping is done under one roof with a focus on vertical integration.
Thermal power generator
Generators transform heat into electricity directly by using linear alternators. Design breakthroughs have resulted in an extremely reliable, long-life, maintenance-free, and quiet, electricity generating platform. The FPSE generators, when heated at their absorber, can literally transform any flow of heat into a steady output of electricity. These same generators are packaged into PowerGen’s energy products, these make use of multiple types of fuels to generate grid-quality electric power.
For more information visit www.remotepowergen.com
Schneider - Smarter Infra for O&G.pptx
This document discusses the benefits of adopting internet protocols and a publish/subscribe model for SCADA systems used in oil and gas infrastructure. Schneider Electric is a leading provider of SCADA systems, monitoring over 50% of crude oil and refined product pipelines in North America. Adopting open standards and cloud-based solutions allows for more efficient implementation, reduced costs over time, easier testing and support, and new opportunities for optimization applications and hosting models. The document advocates that proprietary protocols no longer provide value and SCADA systems must evolve to keep up with changes in the oil and gas industry.
Slides: The Top 3 North America Data Center Trends for Cooling
The document summarizes a presentation on trends in North American data center cooling. The top 3 trends discussed are: 1) Increased use of economizers as the primary cooling mode rather than supplemental to reduce energy costs; 2) Regulations requiring economizer use in most climate zones; and 3) Data center workloads becoming more dynamic, requiring cooling systems to adapt quickly. Indirect air-to-air heat exchangers are presented as the most efficient economizer option. Liquid cooling is discussed but seen as mainly suitable for niche HPC applications currently. Established technologies like perimeter cooling and containment are evolving to higher efficiencies.
Whynter ARC-12SD Portable Air Conditioner
Whynter ARC-12SD: 12,000 BTU cooling capacity portable air conditioner. Find technical specifications, key features, parts lists, accessories, front panel buttons and indicators, as well as the remote control buttons and indicators of the Whynter ARC-12SD portable air conditioner. And also find out where to get information on prices, discounts, real use reviews, real user ratings, other essential details on this portable air conditioner.
Process simulation introduction 2018
This document provides an introduction and overview of CHEMCAD process simulation software. It discusses CHEMCAD navigation, main features, convergence parameters, modeling procedures, units, standard conditions, tutorials, stream calculations, heat exchanger utilities, sensitivity studies, and plot facilities. An introductory case study involving toluene is presented to demonstrate key capabilities such as control valve and pipe sizing, flashing, heat exchange, and pump power calculation.
Tim edwards (2) the hvacr supply chain 3
The document discusses opportunities for the HVACR industry in Australia to transition to more energy efficient technologies and reduce emissions. Key points include:
- The industry could reduce energy costs by 60%+ ($8 billion annually), reduce GHG emissions by 50%, and cut national emissions by 7% by transitioning HVACR systems.
- Natural refrigerant-based technologies are more energy efficient, lower cost, and can reduce emissions, but awareness in the supply chain is low.
- A transition is needed to train industry professionals, commercialize new technologies, and establish management systems to support low global warming potential refrigerants. Collaboration between government, industry and end users will be important for driving innovation.
Tim edwards (2) the hvacr supply chain 3
The document discusses opportunities for the HVACR industry in Australia to reduce energy consumption and emissions through transitioning to more efficient technologies and refrigerants. Key points include:
- The industry could reduce energy costs by 60% ($8 billion annually) and emissions by 50% through greater efficiency and use of natural refrigerants.
- Many new efficient technologies exist across different HVACR sectors but awareness in the supply chain is low.
- Integrated energy efficiency engineering combining mechanical, energy management, and heat load approaches could significantly improve performance.
- Transitioning to low global warming potential refrigerants is also important to reduce emissions and will be driven by regulations and efficiency demands. Natural refrigerant technologies
Cynergy meat processing sector v2.pptx
This document discusses inefficiencies in industrial refrigeration systems for meat processing plants. It notes that such systems often use 30-70% of plants' electricity and can be optimized to save significant amounts with little capital expenditure. The document introduces Cynergy, a next-generation refrigeration control solution that uses real-time data and 200 control rules to optimize systems for 20-50% energy savings through an implementation process taking 3 months or less. Savings are guaranteed and pay for the service through monthly fees with no upfront client costs.
Energy audit & conservation studies for industries
Informative presentation on methodology for carrying out Energy Audit & Energy Conservation Studies for Industries
Chilled Water Plant Optimization
The document discusses Optimum Energy's HVAC optimization solutions which can reduce energy consumption and costs by 30-60% through technologies like OptimumHVAC, OptimumLOOP, and OptimumTRAV. It provides examples of universities, airports, and research facilities that achieved annual energy savings of 150,000 kWh to over 6,000,000 kWh through Optimum Energy's solutions, with payback periods ranging from 12 to 36 months.
Similar to Ian schmahmann hawk eye-800 presentation 3 (20)
Energy audit & conservation studies for commercial premises
Energy audit & conservation studies for commercial premises
11901621030_Digital control System_Priyashree Nandi.pdf
11901621030_Digital control System_Priyashree Nandi.pdf
Slides: The Top 3 North America Data Center Trends for Cooling
Slides: The Top 3 North America Data Center Trends for Cooling
Energy audit & conservation studies for industries
Energy audit & conservation studies for industries
More from ARAaus
Tim edwards (1) hvacr high performance energy
The document discusses the transition to more energy efficient and environmentally friendly HVACR systems. It notes that HVACR currently accounts for a large portion of global warming emissions and that regulations are changing to phase down the use of high-GWP refrigerants. The transition presents both challenges and opportunities for the industry, including new technology, training, and collaboration across sectors. Natural refrigerant-based systems offer benefits now and can help future-proof the industry against regulatory changes.
Stefan jensen high performance energy low charge nh3 systems_160403
This document discusses low charge ammonia refrigeration systems and their advantages over traditional ammonia and HFC systems. Key points include:
- Low charge ammonia systems can reduce ammonia inventory in air coolers by 30-50 times compared to conventional systems, lowering potential ammonia concentrations.
- Low charge ammonia can achieve specific energy consumptions 0.45-0.60 times lower than values from 2008, through techniques like quality-based refrigerant injection control and high-pressure liquid oil separation.
- Low charge ammonia systems cost similar to conventional ammonia but offer around 20% return on investment over retrofitting HFC plants, and 30-50% savings versus new HFC systems. Lower
Selwyn wallace natural refrigerants (sydney april 2016)
The document provides general information on hydrocarbon refrigerants from Engas Australasia Pty Ltd. It discusses that hydrocarbon refrigerants are natural, non-toxic, and have lower global warming potential than traditional refrigerants. The document also outlines that hydrocarbon refrigerants can be used safely if specific safety measures are followed. Case studies are presented showing successful conversions to hydrocarbon refrigerants. The summary states that converting to hydrocarbon refrigerants provides both capital and operating cost savings while helping the environment.
Sam czyczelis emscap presentation hvacr energy effeciency seminar 2016 format...
EMSC Asia Pacific Pty Limited provides voltage optimisation systems that can lead to energy savings of up to 50-95% depending on the electrical load. Their clients include government buildings and universities. Voltage optimisation works by inducing negative power feedback to the source, effectively generating power from the load side. Case studies show typical savings of 10-20% with payback periods of less than 4 years.
Patrick riakos jeremy tarbox ara hvacr energy efficiency seminar 2016 - oeh v1 6
The document discusses measurement and verification (M&V) of energy savings from efficiency projects. It provides an overview of the International Performance Measurement & Verification Protocol (IPMVP) and the key M&V options. The document also describes NSW government programs that support energy efficiency, including training, resources, and the Energy Savings Scheme (ESS), which creates energy savings certificates to help fund efficiency projects. Case studies demonstrate how M&V was used to quantify savings and evaluate projects under the ESS.
Klaas visser 2016 04-05 energy benefits of ac mt lt refrig in supermarkets -...
“Energy Benefits of Integrating AC, MT and LT Refrigeration in Supermarkets with Water Cooled 2 Stage Transcritical CO2 Systems”
John fick high performance energy 2016 v104 01042016 16 10 format
The document discusses steps towards achieving zero energy buildings, including traditional building energy use and definitions of zero energy buildings. It then summarizes a presentation given by John Fick of Ultima Capital Partners on zero energy building solutions and case studies. The presentation covered topics like zero energy building metrics and constraints, applications of voltage optimization and energy storage, and case studies of implementing these solutions in an ICT data center and dairy processing plant.
Ignacio gavilan ara cgf sustainability 2016 - refrigeration v1
The Consumer Goods Forum (CGF) works to phase out HFC refrigerants and replace them with more sustainable natural refrigerant alternatives. CGF members have installed natural refrigerant systems in over 10,000 stores globally. While natural refrigerants face challenges in terms of cost and viability in hot climates, case studies show they can be cost-effective compared to HFCs over the long-term due to lower operational costs. CGF is working with members and stakeholders to share best practices and further the transition away from HFCs, which if phased out could significantly reduce global warming.
Ian wilson f mayer refrig evolution 4 4-16
The evolution of CO2 Refrigeration system built by Strathbroke Industrial Systems for FMAYER Imports Pty Ltd
Ian tuena (2) natural refrigerants presentation april 2016
This document summarizes refrigeration systems used by ALDI, Woolworths, and Coles supermarkets in Australia, including current and future use of CO2 and natural refrigerants. It discusses ALDI's use of CO2/R134a systems and chest freezers running on R290. It also describes a CO2 transcritical system installed at ALDI and CO2 transcritical and hydrocarbon systems at Coles stores in Coburg. Barriers to the adoption of CO2 transcritical and natural refrigerants in Australia are outlined. Potential commercial applications of natural refrigerants in Australia are also mentioned.
Ian tuena (1) nrc presentation hpe2016
This document discusses providing natural refrigeration solutions for Australian industry. It notes the need for more sustainable refrigeration options due to climate change and increasing energy costs. Natural refrigerants like CO2 and ammonia offer benefits over traditional HFC systems like lower global warming potential and energy efficiency. The document outlines Natural Refrigeration Company's objectives of using leading technology, training customers, and meeting policies to promote the benefits of natural refrigeration solutions. It provides examples of natural refrigeration systems for supermarkets and convenience stores and simulations showing the potential energy savings compared to traditional systems.
Ian schmahmann hawk eye-800 presentation 3
Ian Schmahmann gave a presentation on Wave Industries' Hawk-Eye 800 monitoring and control system. The Hawk-Eye 800 provides real-time HVACR system monitoring, automation, energy efficiency improvements, and remote access capabilities. It has various inputs and outputs that can monitor temperatures, pressures, power usage, gas levels, and more. The system provides benefits like reduced energy costs, improved safety, increased efficiency and profitability for customers.
George haydock future-refrigerants
This document discusses natural refrigerants as an alternative to synthetic refrigerants like R410A. It provides several reasons why natural refrigerants like hydrocarbons are better, including that they have a higher critical temperature, can absorb more heat, and are cheaper. It also presents a case study of retrofitting an air conditioning system at a shopping center with natural refrigerants, achieving a 70% energy saving compared to a new R410A system while keeping costs under budget and minimizing disruption. The document advocates that natural refrigerants can help future proof air conditioning systems.
Duncan cairnie ccm energy solutions hvacr seminar- april 2016
Energy Savings: Improving the Energy Efficiency of
Steam Boilers, Heating Boilers, Hot Water Heaters and
Emissions Reporting
Duncan cairnie ccm energy solutions hvacr seminar- april 2016
This document summarizes the services and products offered by CCM Energy Solutions for improving boiler room energy efficiency. CCM provides full-service boiler room solutions including energy audits, emissions monitoring, retrofits with efficient burners and controls. Key products highlighted are Limpsfield high-efficiency burners, Autoflame combustion management systems, and the Sabien M2G boiler load optimization system. Case studies show these solutions reducing fuel use by up to 25% with paybacks of less than a year.
Dropbox john fick high performance energy 2016 v104 01042016 16-10 format
This presentation discusses steps, solutions, and case studies for achieving near-zero energy buildings. It was presented at the High Performance Energy 2016 conference in Sydney, Australia by John Fick, Managing Director of Ultima Capital Partners. The presentation addresses strategies for making buildings more energy efficient and reducing their environmental impact.
George hHaydock future-refrigerants
The document discusses potential solutions to problems with air conditioning systems at a shopping center. It describes three issues: accessing rooftop units, needing to upgrade units without disrupting tenants, and the owner only being able to fund half the estimated cost. The solution involved rebuilding the existing system to use natural refrigerants, achieving a 70% energy saving compared to new units, minimal disruption, and coming in under the half-cost budget. The upgraded system provides energy savings, future-proofing, and resolved the three problems at the shopping center.
Ian tuena (1) nrc presentation hpe2016
This document discusses providing natural refrigeration solutions for Australian industry. It begins by outlining the need to move toward more sustainable and energy efficient refrigeration systems due to climate change and increasing energy costs. Natural refrigerants like CO2 and ammonia are highlighted as having lower global warming potential and operating costs compared to traditional HFC refrigerants. The document then examines case studies of installing natural refrigerant systems in various sized supermarkets. Simulations show the potential energy savings of a parallel transcritical CO2 system compared to traditional cascade systems. It concludes by emphasizing the advantages of a holistic design approach and lower lifetime costs of natural refrigerant systems.
Ian tuena (2) natural refrigerants presentation april 2016
This document summarizes refrigeration systems using natural refrigerants that have been installed at various Australian supermarkets. It discusses ALDI's use of CO2/R134a systems and chest freezers running on R290. It also describes a CO2 transcritical system installed at an ALDI store as well as similar systems at Woolworths, Coles, and Coles Coburg using CO2. Barriers to adopting CO2 transcritical and natural refrigerants in Australia are outlined. Potential commercial applications for natural refrigerants in Australia are also mentioned.
Ian wilson f mayer refrig evolution 4 4-16
This document summarizes the evolution of a refrigeration system for F Mayer Imports across three stages from 2011-2015. Stage 1 used a CO2/R134a cascade with glycol heating. Stage 2 improved efficiency with a CO2/CO2 cascade and trans-critical high stage. Stage 3 further optimized the trans-critical CO2 system and added ammonia chillers. Through multiple small design improvements at each stage, including under-floor heating, the system achieved a 5-10% efficiency gain over previous stages. The document concludes more complex low-chemical refrigerant systems can achieve efficiency gains to offset additional installation costs through careful control system design.
More from ARAaus (20)
Stefan jensen high performance energy low charge nh3 systems_160403
Stefan jensen high performance energy low charge nh3 systems_160403
Selwyn wallace natural refrigerants (sydney april 2016)
Selwyn wallace natural refrigerants (sydney april 2016)
Sam czyczelis emscap presentation hvacr energy effeciency seminar 2016 format...
Sam czyczelis emscap presentation hvacr energy effeciency seminar 2016 format...
Patrick riakos jeremy tarbox ara hvacr energy efficiency seminar 2016 - oeh v1 6
Patrick riakos jeremy tarbox ara hvacr energy efficiency seminar 2016 - oeh v1 6
Klaas visser 2016 04-05 energy benefits of ac mt lt refrig in supermarkets -...
Klaas visser 2016 04-05 energy benefits of ac mt lt refrig in supermarkets -...
John fick high performance energy 2016 v104 01042016 16 10 format
John fick high performance energy 2016 v104 01042016 16 10 format
Ignacio gavilan ara cgf sustainability 2016 - refrigeration v1
Ignacio gavilan ara cgf sustainability 2016 - refrigeration v1
Ian tuena (2) natural refrigerants presentation april 2016
Ian tuena (2) natural refrigerants presentation april 2016
Duncan cairnie ccm energy solutions hvacr seminar- april 2016
Duncan cairnie ccm energy solutions hvacr seminar- april 2016
Duncan cairnie ccm energy solutions hvacr seminar- april 2016
Duncan cairnie ccm energy solutions hvacr seminar- april 2016
Dropbox john fick high performance energy 2016 v104 01042016 16-10 format
Dropbox john fick high performance energy 2016 v104 01042016 16-10 format
Ian tuena (2) natural refrigerants presentation april 2016
Ian tuena (2) natural refrigerants presentation april 2016
Recently uploaded
Recycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
The Python for beginners. This is an advance computer language.
Python language is very important language at this time. we can easily understand this language by these notes.
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Time Division Multiplexing (TDM) is a method of transmitting multiple signals over a single communication channel by dividing the signal into many segments, each having a very short duration of time. These time slots are then allocated to different data streams, allowing multiple signals to share the same transmission medium efficiently. TDM is widely used in telecommunications and data communication systems.
### How TDM Works
1. **Time Slots Allocation**: The core principle of TDM is to assign distinct time slots to each signal. During each time slot, the respective signal is transmitted, and then the process repeats cyclically. For example, if there are four signals to be transmitted, the TDM cycle will divide time into four slots, each assigned to one signal.
2. **Synchronization**: Synchronization is crucial in TDM systems to ensure that the signals are correctly aligned with their respective time slots. Both the transmitter and receiver must be synchronized to avoid any overlap or loss of data. This synchronization is typically maintained by a clock signal that ensures time slots are accurately aligned.
3. **Frame Structure**: TDM data is organized into frames, where each frame consists of a set of time slots. Each frame is repeated at regular intervals, ensuring continuous transmission of data streams. The frame structure helps in managing the data streams and maintaining the synchronization between the transmitter and receiver.
4. **Multiplexer and Demultiplexer**: At the transmitting end, a multiplexer combines multiple input signals into a single composite signal by assigning each signal to a specific time slot. At the receiving end, a demultiplexer separates the composite signal back into individual signals based on their respective time slots.
### Types of TDM
1. **Synchronous TDM**: In synchronous TDM, time slots are pre-assigned to each signal, regardless of whether the signal has data to transmit or not. This can lead to inefficiencies if some time slots remain empty due to the absence of data.
2. **Asynchronous TDM (or Statistical TDM)**: Asynchronous TDM addresses the inefficiencies of synchronous TDM by allocating time slots dynamically based on the presence of data. Time slots are assigned only when there is data to transmit, which optimizes the use of the communication channel.
### Applications of TDM
- **Telecommunications**: TDM is extensively used in telecommunication systems, such as in T1 and E1 lines, where multiple telephone calls are transmitted over a single line by assigning each call to a specific time slot.
- **Digital Audio and Video Broadcasting**: TDM is used in broadcasting systems to transmit multiple audio or video streams over a single channel, ensuring efficient use of bandwidth.
- **Computer Networks**: TDM is used in network protocols and systems to manage the transmission of data from multiple sources over a single network medium.
### Advantages of TDM
- **Efficient Use of Bandwidth**: TDM all
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Recently uploaded (20)
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
The Python for beginners. This is an advance computer language.
The Python for beginners. This is an advance computer language.
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
TIME DIVISION MULTIPLEXING TECHNIQUE FOR COMMUNICATION SYSTEM
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
BPV-GUI-01-Guide-for-ASME-Review-Teams-(General)-10-10-2023.pdf
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Ian schmahmann hawk eye-800 presentation 3
- 2. A Breakthrough in HVACR Monitoring and Control
- 3. Growing Customer Base Happy Customers Increased Revenue Reduced Callouts ReducedTimeWastage More profit per employee
- 4. Ensure Compliance SafeWorkplace Drive Cost Down Increase Efficiency Increase Profit
- 5. • Real time information • Automation • Energy Efficiency • Measurable improvements • Gas monitoring and shutdown • Less Downtime
- 6. • Automatic alarm notification • Remote monitoring • Remote diagnosis and adjustment • Automated Reporting • Ability to prioritise
- 7. • Large Energy costs • Incentives to reduce energy usage • Change R22 and the old HFC’s to the modern HFC’s and HC’s • Retrofit • New Equipment • Gas Safety concerns
- 8. • Low Cost • 10.6” Touch Screen • 8 analogue inputs, 4 derived inputs and 4 digital inputs • Can accept other sensors • 2 analogue and 8 relay outputs. • PID and On/Off Control • Alarms • PLC Logic • Auto and Manual Reporting • Trend displays • Remote Access • UPS
- 9. Hawk-Eye 800 Block Diagram 10.6” full colour touch-screen plus Data storage and internet Internet Controlled Elements Measured values Monitoring, Alarms, Controllers, PLC 8Analogue inputs 2 x Analogue outputs 8 x Relay outputs 4 Digital inputs Uninterruptable Power Supply
- 10. • Simple Monitoring • Temperature, Pressure, Power,Water, CO2 • Gas Detection and Shutdown • Compressor Control. • Evaporator Control. • Superheat Control . • Defrost Control. • OilTemperature Control
- 11. • Change to VFD • Compressor • Evaporator fans • Change to Propane gas • Compressor staging • Adjust freezer temperature • Alarm on freezer doors opening times • Defrost Management • Cold Room setpoint
- 12. • Example 10kW • High Start up Current • VF Drive At 60% of full speed requires approx 22% of full power • Saving $9,000.00 p. a. Method % Running Power Energy CPH at 27c Cost perYear On/Off 60 10kW 6kWh $1.62 $14,200.00 Variable Frequency 100 2.2kW 2.2kWh $0.594 $5,207.00
- 13. • Determine performance criteria eg • Water used, Energy used, CO2 produced • Running Costs • Install suitable sensors and transmitters • Measure these parameters before making improvements • Make improvements • Measure these parameters again • Reductions and savings
- 14. • Use P vs T table for the refrigerant gas • Enter 21 point curve into lineariser to convert measured pressure into saturated temperature • Use derived formula number 1 to calculate difference between actual temperature and saturated temperature. • Set up PID controller on Derived input. • Output of controller feeds thermal expansion valve • Set alarms on Superheat value to warn if temperature difference gets too low. PID Control T. E.V. Temp Difference Pressure to temp Actual temp
- 15. • Sensors: • Transmitters or trip modules • Gas detection: • Infra red, Semiconductor, Heated wire bridge • PLC sequence • feed valve , return valve, Shut down compresso, Start exhaust fan • Siren Alert • Safety Lockout
- 16. Universal Easily affordable Solution. Energy savings quickly pay for the investment. Easy to install and operate. Strong relationships between contractor and customer. Visibility for contractors and customer. Reduces time on site. Increases your profit. Grow your customer base.
- 17. 2-6 Skinner Ave. Riverwood NSW 2210 Tel 02 9153 5088 Email: info@waveindustries.com.au Website: www.waveindustries.com.au Ian Schmahmann – Technical Director Tel : 0403 090 435 Email: ian.schmahmann@waveindustries.com.au