Calibration introduction
•Download as PPTX, PDF•
1 like•615 views
MECHANICAL -Pressure, Mass, Volume, Torque, Sound, Force, Hardness ELECTRO-TECHNICAL -AC/DC Voltage, AC/DC Current, Resistance, LCR, Frequency, Power Factor, Temperature Simulation THERMAL -Temperature (-80 C to 1200 C), Humidity These all are our specialties in Sigma Test & Research Centre Calibration's lab(link this word to http://www.sigmatest.org/calibration.html). Kindly visit our web page also for more clarity on the calibration topic.
Report
Share
Report
Share
Recommended
Calibration
SGM calibration laboratory provides calibration services for a wide range of thermal, mechanical, and electrical instruments to ensure high accuracy and low measurement uncertainty. They maintain strict environmental conditions and use experienced engineers to calibrate instruments at their state-of-the-art facility or at customer sites. The calibration services include recalibration of temperature, pressure, and electrical signals in instruments such as ovens, humidity chambers, balances, meters, and sensors.
Coterd Laboratory details and testing of ac
This document summarizes the psychrometric lab capabilities for performance testing of air conditioners. The lab can test cooling capacity, power consumption, efficiency ratings, operating conditions, freeze up, sweat tests, air flow, and noise for window, split, and inverter AC units using refrigerants like R410A, R32, and R290. The lab is NABL accredited and can test units with cooling capacities from 9,000 to 60,000 BTU/hr following IS and ISO standards. It also outlines the process for AC manufacturers to utilize the lab for testing and report generation.
How to calibrate an ir thermometer, frank liebmann, 2013 05-07
This document discusses how to properly calibrate an infrared thermometer. It describes the necessary calibration equipment including a thermal radiation source, transfer standard, and mounting device. Two traceability schemes - contact and radiometric - are covered. The calibration procedure is outlined as preparation, setting calibration points, and measuring accurately. Sources of uncertainty like emissivity and distance are evaluated in an uncertainty analysis. Results should be reported with calibration data, uncertainties, and traceability statement. Following best practices can improve infrared thermometer calibration accuracy.
Your permit office and ACCA Manual J, S and D
Occupant satisfaction is the main objective of any Quality HVAC Design. Primary factors impacting occupant satisfaction include: temperature and humidity control, air motion in room, energy efficient operation, adequate ventilation for good indoor air quality and proper zoning. To maximize occupant satisfaction, make sure the equipment is the correct size and the air distribution system is properly designed and installed. For residential applications ACCA Manual J, S & D are the only procedures recognized by ANSI and residential building codes.
Dwyer's Air Balancing Tools: Mobile Meter Software App, UHH2, & Probes
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
Dwyer's Digital Manometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
Automating Temperature Sensor Calibration
Learn about practical solutions for automating temperature calibration in the field and at the bench. Transcat and Fluke Calibration cover how to set-up each solution and the pros and cons of each.
I Work for free
This document discusses strategies for reducing energy costs in a data center by making adjustments to temperature and humidity settings without requiring new technology or expenses. Some key points:
- Increasing temperature settings on cooling equipment by 1-4 degrees can reduce power consumption by 4% per degree and save on costs.
- Humidity levels should be kept between 45-55% to avoid condensation issues; adjusting settings can reduce humidity and costs.
- Past projects involved increasing temperature setpoints on cooling equipment, adjusting humidity settings, implementing lighting schedules and motion sensors, and reducing the number of cooling units running to lower energy use.
- Further planned strategies involve optimizing chiller plant operations, lowering differential temperatures, implementing heating lockouts and
Recommended
Calibration
SGM calibration laboratory provides calibration services for a wide range of thermal, mechanical, and electrical instruments to ensure high accuracy and low measurement uncertainty. They maintain strict environmental conditions and use experienced engineers to calibrate instruments at their state-of-the-art facility or at customer sites. The calibration services include recalibration of temperature, pressure, and electrical signals in instruments such as ovens, humidity chambers, balances, meters, and sensors.
Coterd Laboratory details and testing of ac
This document summarizes the psychrometric lab capabilities for performance testing of air conditioners. The lab can test cooling capacity, power consumption, efficiency ratings, operating conditions, freeze up, sweat tests, air flow, and noise for window, split, and inverter AC units using refrigerants like R410A, R32, and R290. The lab is NABL accredited and can test units with cooling capacities from 9,000 to 60,000 BTU/hr following IS and ISO standards. It also outlines the process for AC manufacturers to utilize the lab for testing and report generation.
How to calibrate an ir thermometer, frank liebmann, 2013 05-07
This document discusses how to properly calibrate an infrared thermometer. It describes the necessary calibration equipment including a thermal radiation source, transfer standard, and mounting device. Two traceability schemes - contact and radiometric - are covered. The calibration procedure is outlined as preparation, setting calibration points, and measuring accurately. Sources of uncertainty like emissivity and distance are evaluated in an uncertainty analysis. Results should be reported with calibration data, uncertainties, and traceability statement. Following best practices can improve infrared thermometer calibration accuracy.
Your permit office and ACCA Manual J, S and D
Occupant satisfaction is the main objective of any Quality HVAC Design. Primary factors impacting occupant satisfaction include: temperature and humidity control, air motion in room, energy efficient operation, adequate ventilation for good indoor air quality and proper zoning. To maximize occupant satisfaction, make sure the equipment is the correct size and the air distribution system is properly designed and installed. For residential applications ACCA Manual J, S & D are the only procedures recognized by ANSI and residential building codes.
Dwyer's Air Balancing Tools: Mobile Meter Software App, UHH2, & Probes
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
Dwyer's Digital Manometers
The materials included in this compilation are for the use of Dwyer Instruments, Inc. potential customers and current employees as a resource only. They may not be reproduced, published, or transmitted electronically for commercial purposes. Furthermore, the Company’s name, likeness, product names, and logos, included within these compilations may not be used without specific, written prior permission from Dwyer Instruments, Inc. ©Copyright 2015 Dwyer Instruments, Inc.
Automating Temperature Sensor Calibration
Learn about practical solutions for automating temperature calibration in the field and at the bench. Transcat and Fluke Calibration cover how to set-up each solution and the pros and cons of each.
I Work for free
This document discusses strategies for reducing energy costs in a data center by making adjustments to temperature and humidity settings without requiring new technology or expenses. Some key points:
- Increasing temperature settings on cooling equipment by 1-4 degrees can reduce power consumption by 4% per degree and save on costs.
- Humidity levels should be kept between 45-55% to avoid condensation issues; adjusting settings can reduce humidity and costs.
- Past projects involved increasing temperature setpoints on cooling equipment, adjusting humidity settings, implementing lighting schedules and motion sensors, and reducing the number of cooling units running to lower energy use.
- Further planned strategies involve optimizing chiller plant operations, lowering differential temperatures, implementing heating lockouts and
The beginners guide to heat treatment control v2
This document provides an overview of heat treatment control for beginners. It explains that heat treaters use controlled application of heat and additives to materials to improve properties like strength and wear resistance. Temperature is monitored using sensors like thermocouples and controlled using programs on devices like PID controllers or programmers. Regulations like AMS2750 provide standards for instrumentation calibration and record keeping. Key areas for heat treaters are managing thermocouples, calibrating instruments, and documenting temperature uniformity surveys according to the standards.
Portable flow meter for measurement of compressed air, gases, and heat quanti...
Portable flow meter for measurement of compressed air, gases, and heat quanti...Classic Controls, Inc.
The FLUXUS G601 CA Energy is the ideal tool for carrying out complete energy efficiency tasks in the industry as well as within facility management by allowing the measurement of compressed air flow rates as well as the monitoring of thermal energy quantities and the flow rate determination of any kind of liquid or gaseous media with just one device.Temperature Mapping_Kevin Loomis_Panasonic Healthcare
Data Logging Equipment, Procedures and Compliance - history, trends, and future considerations, along with revision protocols and impact assessment when making changes to an SOP. Staying on top of emerging trends is key to being in compliance in order to pass an FDA audit.
Kevin Loomis currently heads and manages the Panasonic Healthcare department for validation services and engineering support. His department is responsible for assisting customers in meeting regulatory requirements in pharmaceutical, biomedical, clinical and academic environments. He also providesvalidation related support and consultations to Panasonic engineers, customers and distribution professionals worldwide. His department’s validation offerings have centered on long established “cGMP” and “GAMP” approaches, where quality by design is considered equally as important as quality by performance. Prior to Panasonic, Kevin was a field service/ validation engineer with Thomas Engineering. Kevin has had the opportunity to work with many major institutions around the world in providing validation support.
Ams2750 e presentation
The document summarizes the key changes between revisions D and E of the AMS2750 standard for heat treating. Some of the major changes included allowing wireless instrumentation, clarifying requirements for life of thermocouples, emphasizing the recording of "as found" calibration data, increasing calibration points for test instruments, and specifying electronic record requirements. The document reviews over a dozen specific changes between the two revisions in areas like furnace instrumentation, quench system recording, and calibration reporting.
Air Volume Measurement Meter by ACMAS Technologies Pvt Ltd.
The document describes the ACM-AVM-2614 air volume measurement meter. It measures air flow volume, temperature, and velocity using a hot wire probe. It has applications in HVAC, clean rooms, and the automotive industry. The meter uses the pitot-tube principle and features a portable, easy-to-use design with a protective PVC or FRP casing. It has a large LCD display, data logging, printing capabilities, and a rechargeable battery for portable use. Measurements include air flow from 150-3000 cubic meters per hour with 5% accuracy.
Calibration
this PPT will help u with understanding what is calibration, and calibration procedure for calibrating temperature measuring devices
Validation Dataloggers - Jason Daoust
Jason Daoust – Masy Systems
Validation Dataloggers: Trends, considerations, and options in use today
Peltier cooled series.hires
These incubators use innovative peltier cooling technology that eliminates the need for a refrigeration compressor, using over 70% less power than alternative models. They provide even air distribution and temperature uniformity across shelves. One customer was able to replace two compressor-based incubators with a single Shel Lab SRI20P unit due to its superior temperature uniformity. The SRI20P also saves on energy costs and reduces air conditioning loads in laboratories.
How to Use a Portable Bath to Improve Calibration of Sanitary RTD's and Trans...
Learn how the Fluke Calibration 6019A and 7109A Portable Calibration Baths can improve the calibration throughput and accuracy of sanitary temperature sensors and transmitters. Since production downtime can be costly, increasing sensor calibration throughput is critical.
mapping protocol
This document outlines a temperature mapping protocol for cold and freezer rooms. It describes collecting electronic temperature data from multiple locations over 48 hours to identify temperature variations, hot and cold spots, and their potential causes. The expected outputs are recommendations for safe vaccine storage locations, optimal sensor placement, and any necessary remedial actions. The protocol details selecting data loggers, designating a mapping team, conducting site surveys, setting acceptance criteria, labeling and positioning loggers, downloading the data, and analyzing the results to conclude on temperature stability and inform improvements.
A practical approach to pharmaceutical HVAC energy reduction
This document outlines strategies for reducing energy use in pharmaceutical HVAC systems. It identifies common areas with high energy savings potential, such as reducing air change rates and implementing night/weekend setbacks. Barriers to energy reduction like lack of funding and QA approval are discussed. The presentation recommends hosting team-based "energy kaizens" to identify opportunities and gain stakeholder buy-in. Case studies show projects at pharmaceutical plants that cut HVAC energy use up to 66% by optimizing air flow and implementing variable speed controls.
Calibration of air pollution
Calibration of air pollution monitoring instruments is important to ensure reliable measurements. Instruments can drift over time so they need to be calibrated regularly according to a schedule. Calibration involves comparing the instrument to absolute standards to check for any variation and ensure precise and accurate readings. Recognizing the need for reliable data, Envirotech has set up various reference and calibration facilities, including for flow, temperature, humidity, vacuum, time, and more. They calibrate their own instruments using these facilities to validate measurements at low cost according to customers' needs.
Calibration of air pollution
Calibration of air pollution monitoring instruments is important to ensure reliable measurements. Instruments can drift over time so they need to be calibrated regularly according to a schedule. Calibration involves comparing the instrument to absolute standards to check for any variation and ensure precise and accurate readings. Recognizing the need for reliable data, Envirotech has set up various reference and calibration facilities, including for flow, temperature, humidity, vacuum, time, and more. They calibrate their own instruments using these facilities to validate measurements at low cost according to requirements.
TEMPERATURE MAPPING & VALIDATION, MONITORING AND ALERT SOLUTIONS FOR SENSITIV...
Temperature Mapping is the process by which entire area of a warehouse/cold room/vehicle is continuously monitored, recorded and analyzed over a period of time under real operating conditions. Validation is the process through which the entire recording is analysed and certified by international accredited bodies. We are associated with Thermal Compliance Ltd, UK for Temperature Mapping & Validation.
Commercial CO2 refrigeration - A Japanese experience
Katsunori Shibata talked about the new CO2 installations such as the recent one in Osaka and explained the performance of the booster system with four compressors, perfectly equipped for low temperature applications.
Thermal Imaging in your Maintenance Program: Intermediate Infrared Concepts a...
Industrial Maintenance Professionals, please join us on August 2nd for the latest Thermal Imaging best practices webinar presented by Sat Sandhu, Thermography Services Support Manager Thermal / Infrared Thermography, Level III, Fluke. View our Fluke Thermal Imager Selection Guide: http://www.transcat.com/calibration-resources/selection-guides/fluke-thermal-imager/
Fernando Gomez - Calling All Fans of Good Ventilation
Calling All Fans of Good Ventilation - Fernando Gomez, PIC, from the 2020 Iowa Pork Congress, held January 22 - 23, 2020, Des Moines, IA, USA.
BERG Precision Temperature Control Systems
Berg Precision designs and manufactures custom temperature control systems to meet customers' unique application needs. They provide fully automatic units with adaptive controls that maintain precise temperatures and flow rates. Berg has supplied temperature control systems for transportation battery testing facilities that maintain temperatures within +/-0.1 degrees Celsius and for particle accelerators that control ultra-clean water within the same precision.
Ac systems for Diploma engineering
Air conditioning systems are classified according to the season they are used, the arrangement of machines, and purpose. They deal with maintaining desired internal atmospheric conditions regardless of external conditions by controlling temperature, humidity, air purity and motion. Common types include winter, summer, year-round, unitary, central, comfort, and industrial air conditioning systems.
RESUME (01-26-16)
Rex Arthur is seeking an HVAC/R position and has over 10 years of experience as a residential journeyman electrician and over 2 years of experience as an HVAC/R technician. He has an Associate of Applied Science degree in Air Conditioning Technology expected from the College of Southern Nevada in November 2016. His skills include electrical testing, diagnosis, installation, brazing, evacuation, charging, and repair of HVAC/R systems up to 25 tons. He is certified in EPA 608 for refrigerants, OSHA 30 construction safety, and has maintained a clean driving record for over 10 years.
Non destructive testing
Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties.
Calibration service
Calibration testing involves comparing instruments to standards to ensure conformity. Sigma Test & Research Centre is a growing calibration laboratory that provides calibration services for thermal, mechanical, electrical, and other instruments according to international standards. The laboratory facilitates calibration testing at its address in Delhi, India and can be contacted through Mr. Rahul Gupta.
More Related Content
What's hot
The beginners guide to heat treatment control v2
This document provides an overview of heat treatment control for beginners. It explains that heat treaters use controlled application of heat and additives to materials to improve properties like strength and wear resistance. Temperature is monitored using sensors like thermocouples and controlled using programs on devices like PID controllers or programmers. Regulations like AMS2750 provide standards for instrumentation calibration and record keeping. Key areas for heat treaters are managing thermocouples, calibrating instruments, and documenting temperature uniformity surveys according to the standards.
Portable flow meter for measurement of compressed air, gases, and heat quanti...
Portable flow meter for measurement of compressed air, gases, and heat quanti...Classic Controls, Inc.
The FLUXUS G601 CA Energy is the ideal tool for carrying out complete energy efficiency tasks in the industry as well as within facility management by allowing the measurement of compressed air flow rates as well as the monitoring of thermal energy quantities and the flow rate determination of any kind of liquid or gaseous media with just one device.Temperature Mapping_Kevin Loomis_Panasonic Healthcare
Data Logging Equipment, Procedures and Compliance - history, trends, and future considerations, along with revision protocols and impact assessment when making changes to an SOP. Staying on top of emerging trends is key to being in compliance in order to pass an FDA audit.
Kevin Loomis currently heads and manages the Panasonic Healthcare department for validation services and engineering support. His department is responsible for assisting customers in meeting regulatory requirements in pharmaceutical, biomedical, clinical and academic environments. He also providesvalidation related support and consultations to Panasonic engineers, customers and distribution professionals worldwide. His department’s validation offerings have centered on long established “cGMP” and “GAMP” approaches, where quality by design is considered equally as important as quality by performance. Prior to Panasonic, Kevin was a field service/ validation engineer with Thomas Engineering. Kevin has had the opportunity to work with many major institutions around the world in providing validation support.
Ams2750 e presentation
The document summarizes the key changes between revisions D and E of the AMS2750 standard for heat treating. Some of the major changes included allowing wireless instrumentation, clarifying requirements for life of thermocouples, emphasizing the recording of "as found" calibration data, increasing calibration points for test instruments, and specifying electronic record requirements. The document reviews over a dozen specific changes between the two revisions in areas like furnace instrumentation, quench system recording, and calibration reporting.
Air Volume Measurement Meter by ACMAS Technologies Pvt Ltd.
The document describes the ACM-AVM-2614 air volume measurement meter. It measures air flow volume, temperature, and velocity using a hot wire probe. It has applications in HVAC, clean rooms, and the automotive industry. The meter uses the pitot-tube principle and features a portable, easy-to-use design with a protective PVC or FRP casing. It has a large LCD display, data logging, printing capabilities, and a rechargeable battery for portable use. Measurements include air flow from 150-3000 cubic meters per hour with 5% accuracy.
Calibration
this PPT will help u with understanding what is calibration, and calibration procedure for calibrating temperature measuring devices
Validation Dataloggers - Jason Daoust
Jason Daoust – Masy Systems
Validation Dataloggers: Trends, considerations, and options in use today
Peltier cooled series.hires
These incubators use innovative peltier cooling technology that eliminates the need for a refrigeration compressor, using over 70% less power than alternative models. They provide even air distribution and temperature uniformity across shelves. One customer was able to replace two compressor-based incubators with a single Shel Lab SRI20P unit due to its superior temperature uniformity. The SRI20P also saves on energy costs and reduces air conditioning loads in laboratories.
How to Use a Portable Bath to Improve Calibration of Sanitary RTD's and Trans...
Learn how the Fluke Calibration 6019A and 7109A Portable Calibration Baths can improve the calibration throughput and accuracy of sanitary temperature sensors and transmitters. Since production downtime can be costly, increasing sensor calibration throughput is critical.
mapping protocol
This document outlines a temperature mapping protocol for cold and freezer rooms. It describes collecting electronic temperature data from multiple locations over 48 hours to identify temperature variations, hot and cold spots, and their potential causes. The expected outputs are recommendations for safe vaccine storage locations, optimal sensor placement, and any necessary remedial actions. The protocol details selecting data loggers, designating a mapping team, conducting site surveys, setting acceptance criteria, labeling and positioning loggers, downloading the data, and analyzing the results to conclude on temperature stability and inform improvements.
A practical approach to pharmaceutical HVAC energy reduction
This document outlines strategies for reducing energy use in pharmaceutical HVAC systems. It identifies common areas with high energy savings potential, such as reducing air change rates and implementing night/weekend setbacks. Barriers to energy reduction like lack of funding and QA approval are discussed. The presentation recommends hosting team-based "energy kaizens" to identify opportunities and gain stakeholder buy-in. Case studies show projects at pharmaceutical plants that cut HVAC energy use up to 66% by optimizing air flow and implementing variable speed controls.
Calibration of air pollution
Calibration of air pollution monitoring instruments is important to ensure reliable measurements. Instruments can drift over time so they need to be calibrated regularly according to a schedule. Calibration involves comparing the instrument to absolute standards to check for any variation and ensure precise and accurate readings. Recognizing the need for reliable data, Envirotech has set up various reference and calibration facilities, including for flow, temperature, humidity, vacuum, time, and more. They calibrate their own instruments using these facilities to validate measurements at low cost according to customers' needs.
Calibration of air pollution
Calibration of air pollution monitoring instruments is important to ensure reliable measurements. Instruments can drift over time so they need to be calibrated regularly according to a schedule. Calibration involves comparing the instrument to absolute standards to check for any variation and ensure precise and accurate readings. Recognizing the need for reliable data, Envirotech has set up various reference and calibration facilities, including for flow, temperature, humidity, vacuum, time, and more. They calibrate their own instruments using these facilities to validate measurements at low cost according to requirements.
TEMPERATURE MAPPING & VALIDATION, MONITORING AND ALERT SOLUTIONS FOR SENSITIV...
Temperature Mapping is the process by which entire area of a warehouse/cold room/vehicle is continuously monitored, recorded and analyzed over a period of time under real operating conditions. Validation is the process through which the entire recording is analysed and certified by international accredited bodies. We are associated with Thermal Compliance Ltd, UK for Temperature Mapping & Validation.
Commercial CO2 refrigeration - A Japanese experience
Katsunori Shibata talked about the new CO2 installations such as the recent one in Osaka and explained the performance of the booster system with four compressors, perfectly equipped for low temperature applications.
Thermal Imaging in your Maintenance Program: Intermediate Infrared Concepts a...
Industrial Maintenance Professionals, please join us on August 2nd for the latest Thermal Imaging best practices webinar presented by Sat Sandhu, Thermography Services Support Manager Thermal / Infrared Thermography, Level III, Fluke. View our Fluke Thermal Imager Selection Guide: http://www.transcat.com/calibration-resources/selection-guides/fluke-thermal-imager/
Fernando Gomez - Calling All Fans of Good Ventilation
Calling All Fans of Good Ventilation - Fernando Gomez, PIC, from the 2020 Iowa Pork Congress, held January 22 - 23, 2020, Des Moines, IA, USA.
BERG Precision Temperature Control Systems
Berg Precision designs and manufactures custom temperature control systems to meet customers' unique application needs. They provide fully automatic units with adaptive controls that maintain precise temperatures and flow rates. Berg has supplied temperature control systems for transportation battery testing facilities that maintain temperatures within +/-0.1 degrees Celsius and for particle accelerators that control ultra-clean water within the same precision.
Ac systems for Diploma engineering
Air conditioning systems are classified according to the season they are used, the arrangement of machines, and purpose. They deal with maintaining desired internal atmospheric conditions regardless of external conditions by controlling temperature, humidity, air purity and motion. Common types include winter, summer, year-round, unitary, central, comfort, and industrial air conditioning systems.
RESUME (01-26-16)
Rex Arthur is seeking an HVAC/R position and has over 10 years of experience as a residential journeyman electrician and over 2 years of experience as an HVAC/R technician. He has an Associate of Applied Science degree in Air Conditioning Technology expected from the College of Southern Nevada in November 2016. His skills include electrical testing, diagnosis, installation, brazing, evacuation, charging, and repair of HVAC/R systems up to 25 tons. He is certified in EPA 608 for refrigerants, OSHA 30 construction safety, and has maintained a clean driving record for over 10 years.
What's hot (20)
Portable flow meter for measurement of compressed air, gases, and heat quanti...
Portable flow meter for measurement of compressed air, gases, and heat quanti...
Temperature Mapping_Kevin Loomis_Panasonic Healthcare
Temperature Mapping_Kevin Loomis_Panasonic Healthcare
Air Volume Measurement Meter by ACMAS Technologies Pvt Ltd.
Air Volume Measurement Meter by ACMAS Technologies Pvt Ltd.
How to Use a Portable Bath to Improve Calibration of Sanitary RTD's and Trans...
How to Use a Portable Bath to Improve Calibration of Sanitary RTD's and Trans...
A practical approach to pharmaceutical HVAC energy reduction
A practical approach to pharmaceutical HVAC energy reduction
TEMPERATURE MAPPING & VALIDATION, MONITORING AND ALERT SOLUTIONS FOR SENSITIV...
TEMPERATURE MAPPING & VALIDATION, MONITORING AND ALERT SOLUTIONS FOR SENSITIV...
Commercial CO2 refrigeration - A Japanese experience
Commercial CO2 refrigeration - A Japanese experience
Thermal Imaging in your Maintenance Program: Intermediate Infrared Concepts a...
Thermal Imaging in your Maintenance Program: Intermediate Infrared Concepts a...
Fernando Gomez - Calling All Fans of Good Ventilation
Fernando Gomez - Calling All Fans of Good Ventilation
Viewers also liked
Non destructive testing
Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties.
Calibration service
Calibration testing involves comparing instruments to standards to ensure conformity. Sigma Test & Research Centre is a growing calibration laboratory that provides calibration services for thermal, mechanical, electrical, and other instruments according to international standards. The laboratory facilitates calibration testing at its address in Delhi, India and can be contacted through Mr. Rahul Gupta.
Pesticide testing
STRC plays an important role in analyzing and certifying the pesticides both technical grade and formulations for their safe use. STRC has the facilities to carry all the tests to ascertain the conformity to various national or international specifications.
Pqr0
This document summarizes the welding procedure qualification record for oxy-fuel welding of carbon steel. It includes 3 key points:
1) The welding process qualified was oxy-fuel welding of a single-V groove weld in the horizontal position using an RG 60 filler metal between 3.5mm thick carbon steel plates.
2) Mechanical testing was performed including tensile and bend tests, which met the requirements of ASME Section IX. Macro examinations also showed acceptable results.
3) Hardness testing found the weld metal had an average hardness of 186.5 HV, while the HAZ areas were 155.5 HV and the base metal was 143 HV, demonstrating acceptable hardness across the joint.
Ipea api579
The document summarizes the current state and planned developments for the next 10 years of API 579, the Fitness-for-Service standard. It provides an overview of the current contents and assessment procedures in API 579, planned enhancements for the 2006 publication of the new joint API/ASME 579 standard, and future enhancements through 2016. These include new parts covering additional damage mechanisms, updated acceptance criteria, and revised appendices providing additional analysis methods and example problems.
Asnt mpt ii
The document discusses the results of a study on the effects of exercise on memory and thinking abilities in older adults. The study found that regular exercise can help reduce the decline in thinking abilities that often occurs with age. Older adults who exercised regularly performed better on cognitive tests than those who did not exercise regularly.
Viewers also liked (8)
Similar to Calibration introduction
Pyrosales Catalogue - Total Sensor Solution Providers
Pyrosales has established a worldwide reputation as a specialist manufacturer of standard and precision temperature measurement sensors. Visit www.pyrosales.com.au to learn more.
Thermal Validation Equipment Rental
Thermal Validation Equipment rental for Autoclave Validation, Freeze Drier Validation, Temperature and Humidity mapping. Including Kaye Validator 2000, Ellab Tracksense Pro and Vaisala Dataloggers.
Photon-Instruments-Company-Profile
Photon Instruments provides calibration services and sells analytical instruments and equipment. They invite experienced people to join as direct business partners or part-time partners without capital investment. Their services include calibration of humidity, temperature, dew point, pressure, non-contact temperature, light, RPM, and air velocity. They have an ISO-certified 1500 square foot laboratory facility and offer on-site calibration services.
Photon-Instruments-Company-Profile
Photon Instruments provides calibration services and sells analytical instruments and equipment. They invite experienced people to join as direct business partners or part-time partners with no capital investment. Their services include calibration of humidity, temperature, dew point, pressure, non-contact temperature, light, RPM, and air velocity. They have an ISO-certified 1500 square foot laboratory facility and offer on-site calibration services.
Hospital space & engineering services planning basics by season
The document provides guidelines for hospital facility planning and engineering services. It discusses key considerations for the location, size and floor area allocation of hospitals. It recommends minimum requirements for electrical, HVAC, medical gases, plumbing and other engineering systems. Bureau of Indian Standards codes for hospital buildings are also referenced. Floor areas, numbers of operating theaters and ICU beds are estimated based on total hospital beds. Corridor widths, OPD space allocation and ICU bed sizes are also outlined.
new_
Abdullah Shar has over 5 years of experience as an instrument technician in the oil and gas industry. He has a BA degree and 3 years of experience working with instruments used in natural gas plants, gas turbines, and field instrumentation including control valves, fire and gas systems, and vibration equipment. He has worked on installation, maintenance, calibration and troubleshooting of various instruments.
Introduction to Temperature Measurement and Calibration Presented by Fluke Ca...
This document provides an overview of temperature measurement and calibration. It discusses calibration methods like comparison calibration and fixed point calibration. Key factors for choosing temperature measurement equipment are discussed, such as sensor type, temperature range, and required accuracy. Proper placement of sensors in baths and dry wells is also covered. The importance of maintaining calibration standards and training users is emphasized.
Customized test-chambers
Weiber is a leading manufacturer of Customized Test Chambers. Weiber test chamber are designed to work
under the temperature of -100 to +200 deg.
Contact temperature sensor calibration
Calibration of contact temperature sensors like thermocouples and RTDs. Primary and Secondary Calibration.
Fixed point method in primary calibration.
Stable temperature sources, master sensors and calibrated meter in secondary calibration.
pH electrodes-pH sensors CPS41
Ceraliquid CPS41 and CPS41D with ceramic diaphragm and liquid KCl electrolyte, optional built-in temperature sensor. Email: lam.nguyen@vietan-enviro.com HP: 0945 29329
Vacuum Oven Round by ACMAS Technologies Pvt Ltd.
Vacuum ovens- vacuum oven manufacturers, round vacuum ovens, vacuum ovens India, vacuum oven suppliers, vacuum oven manufacturers India, laboratory vacuum ovens, vacuum oven exporters India, round vacuum ovens, vacuum ovens India, vacuum round oven, vacuum oven suppliers India. For More Information Please Logon http://cutt.us/YTl4
Fluke Temperature Calibration Catalog
Diskusi teknis dan info lebih lanjut, hubungi PT Siwali Swantika
☎️ JKT 021-45850618
☎️ SBY 031-8421264
Kunjungi website kami di https://siwali.com/
Calibration Services In India
SIGMA TEST & RESEARCH CENTRE is one of the fastest growing organization in the field of calibration. We provide calibration services to our customers in accordance to IS/ISO/IEC-17025.
Calibration Services
SIGMA TEST & RESEARCH CENTRE is one of the fastest growing organization in the field of calibration. We provide calibration services to our customers in accordance to IS/ISO/IEC-17025. High accuracy calibration equipments, trained personnel & strict environmental conditions are maintained to ensure low uncertainty and high accuracy of measurement.
Precise drying
Technocracy Pvt. Ltd. offers precise drying test chambers for a wide range of applications such as drying, baking, and sterilizing. The chambers have adjustable digital temperature controllers that maintain optimum drying temperature with high circulating, low temperature air for efficient drying. Customized chambers can provide temperature shock testing by creating dramatic temperature changes to detect flaws in specimens. The chambers are manufactured with double walled insulated construction and programmable controllers.
High low-alternating-temperature-humidity-test-chamber
This document describes a high low alternating temperature humidity test chamber manufactured by Technocracy Pvt. Ltd. It can simulate various temperature and humidity environments for testing electronic components, materials, and other products. The chamber interior is made of stainless steel and it has temperature and humidity controls with precision sensors. It can precisely control temperature from 0°C to 100°C and humidity from 30% to 98% RH. The refrigeration system uses imported close-circuit compressors for heating and cooling. It has an LCD touch screen controller with data logging and RS-232 interface for programming and monitoring tests.
HTSU Sales brochure
Heat Treating Services Unlimited has provided services to the heat treating industry since 1998, including instrumentation calibrations, assessments, maintenance, relocations, and training. They offer a wide range of services such as temperature uniformity surveys, CQI-9 assessments, preventative maintenance programs, and equipment installations. HTSU has established itself as an industry leader through its expertise and capabilities across consulting, assessments, calibrations, maintenance, training, and products.
Kimo 200 HRS Thermo Hygrometer Datasheet
The document describes the Kimo HD 200 series of thermo-hygrometers, which measure temperature and humidity. Key features include interchangeable measurement modules allowing measurement of up to 6 parameters simultaneously, wireless communication between probes and instruments or PCs, and data logging capabilities with storage of up to 8,000 measurement points. The document provides details on available models, specifications, technical features, and accessories.
Hot air-oven
We are manufacturers of Hot air oven or laboratory oven in India since 1990. Our laboratory oven are widely used
for day to day heating and drying applications performed in various laboratories.
Similar to Calibration introduction (20)
Pyrosales Catalogue - Total Sensor Solution Providers
Pyrosales Catalogue - Total Sensor Solution Providers
Hospital space & engineering services planning basics by season
Hospital space & engineering services planning basics by season
Introduction to Temperature Measurement and Calibration Presented by Fluke Ca...
Introduction to Temperature Measurement and Calibration Presented by Fluke Ca...
High low-alternating-temperature-humidity-test-chamber
High low-alternating-temperature-humidity-test-chamber
More from sigmatest21
Toy testing
Toys are commonly played with by children and can contain chemicals that cause allergies. Sigma Test & Research Center is a toy testing lab in Delhi that offers toy safety testing and testing of other children's products at reasonable prices. It has experienced experts that can test for toy safety and is located in Delhi, India.
Ndt testing
Non-destructive testing is a group of techniques used to examine materials, components, and systems without damaging them. NDT methods like ultrasound, electromagnetic radiation, and sound are used to evaluate material properties and integrity. Sigma Test & Research Centre offers various NDT services for concrete, including rebound hammer testing, ultrasonic investigation, and load bearing tests to analyze structures without harming them.
Coal testing
SIGMA TEST & RESEARCH CENTRE is one of the Laboratory Testing Service providers in Delhi, which is offering quality testing of coal and anlysis of coal. STRC is
providing coal testing on different parameters like Calorific value, Proximate analysis - Moisture
Food testing
SIGMA TEST & RESEARCH CENTRE is fully conscious of its role in quality control and quality assessment and therefore has created facilities as per international standards meeting requirements of ILAC, ASTM, ISO, USP, BP, Drug Control Authority of India, BIS & NABL. We are continually expanding our capability to cover increasingly broad range of standards.
Chemical testing
Chemical testing by STRC laboratory includes chemical analysis, quality control testing, troubleshooting, advanced research, and trace and ultra-trace level chemical analysis. Additional chemical testing supports formulation and deformulation of projects.
Chemical testing
Chemical testing and analysis involves using reagents to determine chemical compositions. Sigma Test & Research Centre is a leading testing laboratory in Delhi that offers various chemical testing services, including analysis, quality control, troubleshooting, research, and trace chemical analysis to support product development. Sigma is well-equipped to detect unknown chemicals and contamination to ensure quality control.
Marble testing
SIGMA TEST & RESEARCH CENTRE is Scientifically designed and meticulously groomed infrastructure facility of SIGMA TEST & RESEARCH CENTRE has an excellent team of expert & experienced governing board, innovative management, dedicated & multi discipline professionals, aided by the most sophisticated high accuracy measuring instruments & computerized data management system.
Cement testing
SIGMA TEST & RESEARCH CENTRE has experience in testing wide range of construction materials,including Cement,Concrete, Aggregates, Admixture, Flyash, Masonary, Tiles, Wood, Steel, Aluminium, Bircks, Query stones,WMM, GSB and many more.
Buiding material testing
Sigma Test and Research Center Building Material Testing laboratories are equipped with the latest sophisticated testing equipments. our services include not only Building and Road material testing services as well as engineering observation, structural inspection etc.
Steel testing
SIGMA TEST & RESEARCH CENTRE is equipped laboratories provide services for testing the soil, coal testing, environmental testing, chemical testing,Steel Testing, food testing and all other laboratory testing.
Food product testing
Sigma Test and Research Centre is a contract testing laboratory inspected and approved by the USFDA to perform various food product tests including organic, dairy, GMO, and gluten-free food testing. The laboratory also conducts nutritional labeling tests and analyzes vitamins, minerals, and trace metals in foods. Located in Delhi, India, Sigma Test offers food testing services and can be contacted through their website or by calling or emailing their representative, Rahul Gupta.
Aggregate testing services
All aggregate is required to meet a minimum strength valve, as defined by the 10% value test. This and other specifications ensure that only the highest quality materials are being used on construction projects.
Brick testing
This test helps in determining the porosity and density of bricks to be used for construction of load bearing walls. The method involves dimensional measurement and mass to determine density, followed by measuring the increase in mass when soaked in water for a standard period.
More from sigmatest21 (13)
Recently uploaded
Business storytelling: key ingredients to a story
Storytelling is an incredibly valuable tool to share data and information. To get the most impact from stories there are a number of key ingredients. These are based on science and human nature. Using these elements in a story you can deliver information impactfully, ensure action and drive change.
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Stone Art Hub offers the best competitive Marble Pricing in Dubai, ensuring affordability without compromising quality. With a wide range of exquisite marble options to choose from, you can enhance your spaces with elegance and sophistication. For inquiries or orders, contact us at ☎ 9928909666. Experience luxury at unbeatable prices.
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Explore the fascinating world of the Gemini Zodiac Sign. Discover the unique personality traits, key dates, and horoscope insights of Gemini individuals. Learn how their sociable, communicative nature and boundless curiosity make them the dynamic explorers of the zodiac. Dive into the duality of the Gemini sign and understand their intellectual and adventurous spirit.
4 Benefits of Partnering with an OnlyFans Agency for Content Creators.pdf
In the competitive world of content creation, standing out and maximising revenue on platforms like OnlyFans can be challenging. This is where partnering with an OnlyFans agency can make a significant difference. Here are five key benefits for content creators considering this option:
Digital Transformation Frameworks: Driving Digital Excellence
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
This presentation is a curated compilation of PowerPoint diagrams and templates designed to illustrate 20 different digital transformation frameworks and models. These frameworks are based on recent industry trends and best practices, ensuring that the content remains relevant and up-to-date.
Key highlights include Microsoft's Digital Transformation Framework, which focuses on driving innovation and efficiency, and McKinsey's Ten Guiding Principles, which provide strategic insights for successful digital transformation. Additionally, Forrester's framework emphasizes enhancing customer experiences and modernizing IT infrastructure, while IDC's MaturityScape helps assess and develop organizational digital maturity. MIT's framework explores cutting-edge strategies for achieving digital success.
These materials are perfect for enhancing your business or classroom presentations, offering visual aids to supplement your insights. Please note that while comprehensive, these slides are intended as supplementary resources and may not be complete for standalone instructional purposes.
Frameworks/Models included:
Microsoft’s Digital Transformation Framework
McKinsey’s Ten Guiding Principles of Digital Transformation
Forrester’s Digital Transformation Framework
IDC’s Digital Transformation MaturityScape
MIT’s Digital Transformation Framework
Gartner’s Digital Transformation Framework
Accenture’s Digital Strategy & Enterprise Frameworks
Deloitte’s Digital Industrial Transformation Framework
Capgemini’s Digital Transformation Framework
PwC’s Digital Transformation Framework
Cisco’s Digital Transformation Framework
Cognizant’s Digital Transformation Framework
DXC Technology’s Digital Transformation Framework
The BCG Strategy Palette
McKinsey’s Digital Transformation Framework
Digital Transformation Compass
Four Levels of Digital Maturity
Design Thinking Framework
Business Model Canvas
Customer Journey Map
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Nathalie zal delen hoe DEI en ESG een fundamentele rol kunnen spelen in je merkstrategie en je de juiste aansluiting kan creëren met je doelgroep. Door middel van voorbeelden en simpele handvatten toont ze hoe dit in jouw organisatie toegepast kan worden.
Part 2 Deep Dive: Navigating the 2024 Slowdown
Introduction
The global retail industry has weathered numerous storms, with the financial crisis of 2008 serving as a poignant reminder of the sector's resilience and adaptability. However, as we navigate the complex landscape of 2024, retailers face a unique set of challenges that demand innovative strategies and a fundamental shift in mindset. This white paper contrasts the impact of the 2008 recession on the retail sector with the current headwinds retailers are grappling with, while offering a comprehensive roadmap for success in this new paradigm.
Innovative Uses of Revit in Urban Planning and Design
Discover innovative uses of Revit in urban planning and design, enhancing city landscapes with advanced architectural solutions. Understand how architectural firms are using Revit to transform how processes and outcomes within urban planning and design fields look. They are supplementing work and putting in value through speed and imagination that the architects and planners are placing into composing progressive urban areas that are not only colorful but also pragmatic.
Digital Marketing with a Focus on Sustainability
Digital Marketing best practices including influencer marketing, content creators, and omnichannel marketing for Sustainable Brands at the Sustainable Cosmetics Summit 2024 in New York
一比一原版(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证文凭如何办理
永久可查学历认证【微信：A575476】【(QMUE毕业证书)英国爱丁堡玛格丽特女王大学毕业证成绩单Offer】【微信：A575476】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：A575476】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：A575476】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
On episode 272 of the Digital and Social Media Sports Podcast, Neil chatted with Brian Fitzsimmons, Director of Licensing and Business Development for Barstool Sports.
What follows is a collection of snippets from the podcast. To hear the full interview and more, check out the podcast on all podcast platforms and at www.dsmsports.net
DearbornMusic-KatherineJasperFullSailUni
My powerpoint presentation for my Music Retail and Distribution class at Full Sail University
How HR Search Helps in Company Success.pdf
HR search is critical to a company's success because it ensures the correct people are in place. HR search integrates workforce capabilities with company goals by painstakingly identifying, screening, and employing qualified candidates, supporting innovation, productivity, and growth. Efficient talent acquisition improves teamwork while encouraging collaboration. Also, it reduces turnover, saves money, and ensures consistency. Furthermore, HR search discovers and develops leadership potential, resulting in a strong pipeline of future leaders. Finally, this strategic approach to recruitment enables businesses to respond to market changes, beat competitors, and achieve long-term success.
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...
Presentation by Herman Kienhuis (Curiosity VC) on developments in AI, the venture capital investment landscape and Curiosity VC's approach to investing, at the alumni event of Amsterdam Business School (University of Amsterdam) on June 13, 2024 in Amsterdam.
2024-6-01-IMPACTSilver-Corp-Presentation.pdf
IMPACT Silver is a pure silver zinc producer with over $260 million in revenue since 2008 and a large 100% owned 210km Mexico land package - 2024 catalysts includes new 14% grade zinc Plomosas mine and 20,000m of fully funded exploration drilling.
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Know what your zodiac sign says about your taste in food! Explore how the 12 zodiac signs influence your culinary preferences with insights from MyPandit. Dive into astrology and flavors!
Profiles of Iconic Fashion Personalities.pdf
The fashion industry is dynamic and ever-changing, continuously sculpted by trailblazing visionaries who challenge norms and redefine beauty. This document delves into the profiles of some of the most iconic fashion personalities whose impact has left a lasting impression on the industry. From timeless designers to modern-day influencers, each individual has uniquely woven their thread into the rich fabric of fashion history, contributing to its ongoing evolution.
Recently uploaded (20)
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Best Competitive Marble Pricing in Dubai - ☎ 9928909666
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
Unveiling the Dynamic Personalities, Key Dates, and Horoscope Insights: Gemin...
4 Benefits of Partnering with an OnlyFans Agency for Content Creators.pdf
4 Benefits of Partnering with an OnlyFans Agency for Content Creators.pdf
Digital Transformation Frameworks: Driving Digital Excellence
Digital Transformation Frameworks: Driving Digital Excellence
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
NIMA2024 | De toegevoegde waarde van DEI en ESG in campagnes | Nathalie Lam |...
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Registered-Establishment-List-in-Uttarakhand-pdf.pdf
Innovative Uses of Revit in Urban Planning and Design
Innovative Uses of Revit in Urban Planning and Design
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Brian Fitzsimmons on the Business Strategy and Content Flywheel of Barstool S...
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...
Presentation by Herman Kienhuis (Curiosity VC) on Investing in AI for ABS Alu...
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Zodiac Signs and Food Preferences_ What Your Sign Says About Your Taste
Calibration introduction
- 1. NABL ACCREDITED LABORATORY Mechanical C-0873 Thermal C-1069 Electro technical C-1158
- 2. SIGMA TEST & RESEARCH CENTRE is one of the fastest growing organizations in the field of calibration. We provide calibration services to our customers in accordance to IS/ISO/IEC-17025. High accuracy calibration equipment’s, trained personnel & strict environmental conditions are maintained to ensure low uncertainty and high accuracy of measurement.
- 3. We Calibrate • THERMAL INSTRUMENTS • MECHANICAL INSTRUMENTS • ELECTRICAL INSTRUMENTS • MISCELLANEOUS INSTRUMENTS
- 4. THERMAL • DEEP FREEZER/FREEZER • RTD (pt-100) • THERMOCOUPLE • LIQUID IN GLASS THERMOMETER • BOD INCUBATOR/COD
- 5. • HUMIDITY CHAMBER • HYGROMETER • TEMPERATURE CONTROLLER • PYROMETER • PID CONTROLLER • TEMPERATURE SOURCE • OVEN/FURNACE • HOT PLATE
- 6. MECHANICAL:MASS • STANDARD WEIGHT • WEIGHING MACHINES • ANALYTICAL MACHINE • PRECISION MACHINE • PIPETTE BURETTE • VOLUMETRIC FLASK MECHANICAL:DIMENSION • VERNIER CALIPER • HEIGHT GAUGE • MICRO-METER • STEEL-SCALE • TEST SIEVE
- 7. MECHANICAL:PRESSURE • PRESSURE GAUGE • MANOMETER • MAGNEHELIC GUAGE • VACUUM GUAGE MECHANICAL:FORCE • UNIVERSAL TESTING MACHINE(UTM) • COMPRESSION TESTING MACHINE (CTM) • TORQUE WRENCH
- 8. ELECTRICAL INSTRUMENTS • MULTIMETERS • CLAMP METERS • VOLT METERS • AMPERE METERS • LEAKAGE TESTERS • RELAY TEST KITS • MEGGER (HT/LT) (100V TO10KV) • EARTH TESTERS • HIGH VOLTAGE TEST KITS(AC/DC)
- 9. • TIMER & STOPWATCH • CONTACT RESISTANCE TEST KITS • WINDING RESISTANCE KITS • OHM METERS • BDV TEST KITS • KNEE POINT TEST KITS • CURRENT TRANSFORMERS • VOLTAGE TRANSFORMERS • LOOP TESTERS
- 10. MISCELLANEOUS INSTRUMENTS • PH METER • CONDUCTIVITY METER • RPM METER • ENVIRONMENTAL CONDITION MONITORING UNIT • REBOUND HAMMER • SOUND METER • TURBIDITY METER • SPECTROPHOTOMETER • AAS • MICROPLATE • BATCHING PLANT
- 11. SIGMA TEST & RESEARCH CENTRE CALIBRATION LAB: A-131 MANGOLPURI INDUSTRIAL AREA PHASE-II, DELHI-110034 Regd. Off : BA-15, MANGOL PURI INDUSTRIAL AREA PHASE-II DELHI- 110034 Contact Person: Mr. Suresh Chandra Bhatt Mr. Upender Kumar Mobile No : +91 9650309230/ 8130622900 Tel No: +91-11-48481481/88/60 Fax: +91-11-43852040 Email: delhi@sigmatest.org Website: www.sigmatest.org