ENERGY AUDIT
•Download as PPTX, PDF•
1 like•497 views
An energy audit is conducted to identify opportunities to reduce energy use in buildings, processes, or systems. The document outlines the process for conducting energy audits including: on-site inspections of critical equipment and data collection using various meters; 24-hour power monitoring; equipment and lighting surveys; and HVAC system analysis. Recommendations are provided to management following data analysis to lower energy consumption without negatively impacting operations which are then reviewed periodically.
Report
Share
Report
Share
Recommended
Presentation_Energy Audit_2.1
Qeraton Arabia offers energy auditing and renewable energy services. An energy audit identifies energy inefficiencies to reduce costs. It inspects electrical systems, HVAC, lighting and more. The audit procedure involves data collection, analysis, and identifying energy efficiency measures. Thermography detects hot spots. Recommendations include efficient equipment, insulation, controls and renewable energy. The report details findings, savings opportunities and an implementation plan.
Tlc esta
The document describes a study testing a Temperature Limit Controller (TLC) device that can be installed in existing air conditioning units to limit temperature settings and save energy without disturbing users. The TLC was tested over 6 months in 4 departments, showing an average 40% reduction in compressor run time and corresponding energy savings. Calculations estimate the TLC would save over $100,000 annually if installed in all 7,000 A/C units at a plant, with a return on investment within 8 months.
Introduction to energy auditing
An energy audit is an inspection, survey and analysis of energy flows, for energy conservation in a building, process or system to reduce the amount of energy input into the system without negatively affecting the output(s).
Energy audit ppt
This document discusses energy audits. It defines an energy audit as the verification, monitoring, and analysis of energy use to identify opportunities to improve energy efficiency. Energy audits are broadly classified into three categories: preliminary, general, and detailed. A preliminary audit involves a brief review of utility bills and walk-through of a facility to identify major areas of energy waste. A general audit collects more detailed operational data over 12-36 months. A detailed audit provides an in-depth analysis of energy use through detailed data collection and system monitoring to develop an accurate energy use baseline. The document also outlines a 10 step plan for conducting a detailed energy audit in three phases: pre-audit, audit, and post-audit implementation.
Control Systems
In this session you will learn:
Basics of control systems
Open and Closed loop control systems
Elements of automatic control
Two position control system
Modes of automatic control
For more information, visit: https://www.mindsmapped.com/courses/industrial-automation/complete-training-on-industrial-automation-for-beginners/
Session 24 - Control Systems
In this session you will learn:
Basics of control systems
Open and Closed loop control systems
Elements of automatic control
Two position control system
Modes of automatic control
General em presentation (25 02-09)
This document provides an overview of energy management and the services offered by Universal Engineering Services. It defines energy management as understanding a building's energy usage to reduce costs and emissions. An energy audit identifies areas for savings through inspecting energy usage. There are three types of audits: preliminary, single-purpose, and comprehensive. Comprehensive audits provide the most detailed analysis of savings opportunities. Universal Engineering Services offers various energy management services including audits, implementation of savings projects, and monitoring to reduce clients' energy costs by 5-25% per month.
Session 06 - Instruments - Part 2
In this session you will learn:
Instruments
Transmitters
Control valves
Valve actuators
Valve positioner
Recommended
Presentation_Energy Audit_2.1
Qeraton Arabia offers energy auditing and renewable energy services. An energy audit identifies energy inefficiencies to reduce costs. It inspects electrical systems, HVAC, lighting and more. The audit procedure involves data collection, analysis, and identifying energy efficiency measures. Thermography detects hot spots. Recommendations include efficient equipment, insulation, controls and renewable energy. The report details findings, savings opportunities and an implementation plan.
Tlc esta
The document describes a study testing a Temperature Limit Controller (TLC) device that can be installed in existing air conditioning units to limit temperature settings and save energy without disturbing users. The TLC was tested over 6 months in 4 departments, showing an average 40% reduction in compressor run time and corresponding energy savings. Calculations estimate the TLC would save over $100,000 annually if installed in all 7,000 A/C units at a plant, with a return on investment within 8 months.
Introduction to energy auditing
An energy audit is an inspection, survey and analysis of energy flows, for energy conservation in a building, process or system to reduce the amount of energy input into the system without negatively affecting the output(s).
Energy audit ppt
This document discusses energy audits. It defines an energy audit as the verification, monitoring, and analysis of energy use to identify opportunities to improve energy efficiency. Energy audits are broadly classified into three categories: preliminary, general, and detailed. A preliminary audit involves a brief review of utility bills and walk-through of a facility to identify major areas of energy waste. A general audit collects more detailed operational data over 12-36 months. A detailed audit provides an in-depth analysis of energy use through detailed data collection and system monitoring to develop an accurate energy use baseline. The document also outlines a 10 step plan for conducting a detailed energy audit in three phases: pre-audit, audit, and post-audit implementation.
Control Systems
In this session you will learn:
Basics of control systems
Open and Closed loop control systems
Elements of automatic control
Two position control system
Modes of automatic control
For more information, visit: https://www.mindsmapped.com/courses/industrial-automation/complete-training-on-industrial-automation-for-beginners/
Session 24 - Control Systems
In this session you will learn:
Basics of control systems
Open and Closed loop control systems
Elements of automatic control
Two position control system
Modes of automatic control
General em presentation (25 02-09)
This document provides an overview of energy management and the services offered by Universal Engineering Services. It defines energy management as understanding a building's energy usage to reduce costs and emissions. An energy audit identifies areas for savings through inspecting energy usage. There are three types of audits: preliminary, single-purpose, and comprehensive. Comprehensive audits provide the most detailed analysis of savings opportunities. Universal Engineering Services offers various energy management services including audits, implementation of savings projects, and monitoring to reduce clients' energy costs by 5-25% per month.
Session 06 - Instruments - Part 2
In this session you will learn:
Instruments
Transmitters
Control valves
Valve actuators
Valve positioner
Energy Audit of a Food Industry
The Energy Audit would give a positive orientation for implementing the energy cost
reduction, preventive maintenance and quality control programmes which are vital for production and
utility activities. Energy Audit is the translation of conservation ideas into realities, by lending
technically feasible solutions with economic and other organizational considerations within a specified
time frame. This thesis deals with the identification of nature of losses in industry that manufacturers
food products. The energy accounting with the use of measuring instruments like lux-meter, power and
harmonic analyzer etc. helps to record and analyze data of energy usage. With the help of this data,
energy wastage and losses are calculated and recommendations are given to reduce these losses and
improve savings. Lastly, to deal with the issues of power quality, power quality assessment is done at
PCC.
Measure and analyze - Thermal energy metering learn about new federal regulat...
Measurement Canada (MC) is launching a new program which will require that all thermal energy meters be Type Approved when used in trade for the measurement of heat energy by the year 2021. Thermal energy meters are flow meters used in a heat exchange circuit, where heat is given up (heating) or absorbed (cooling) by a heat conveying liquid. How MC establishes the Terms and Conditions that will be used to regulate this practice will be outlined. How thermal energy meters must meet the applicable requirements of the Weights and Measures Act and Regulations will be explained.
Instruments - Part 2
In this session you will learn:
Instruments
Transmitters
Control valves
Valve actuators
Valve positioner
For more information, visit: https://www.mindsmapped.com/courses/industrial-automation/complete-training-on-industrial-automation-for-beginners/
Bioreactor control system
This document discusses bioreactor control systems. It describes different types of control systems including manual control, automatic control, two-position controllers, proportional control, integral control, and derivative control. It explains that automatic control systems use four basic components: a measuring element, controller, final control element, and the process to be controlled. The document also summarizes different combinations of control methods, such as proportional plus integral control and proportional plus integral plus derivative control.
Qeraton Intro- Energy Audits
Qeraton Arabia provides energy auditing services to help clients lower energy costs and protect the environment. They conduct in-depth audits that include analyzing historical energy use, on-site measurements, identifying potential efficiency solutions, engineering and economic analysis of modifications, and reporting. The audits assess various equipment and utilities, using tools like power loggers, thermography, and ultrasound scanning. The audit team includes energy auditors and technicians. The final deliverables are a presentation of findings and recommendations, and a comprehensive report with technical inventory, consumption analysis, efficiency measures, and financial analysis.
Energy audit & conservation studies for commercial premises
This document provides an overview of the scope and instruments used for an energy audit of commercial premises conducted by Senergy Consultants. The energy audit evaluates energy performance, bills, equipment efficiency, lighting, air quality, and distribution systems. It analyzes the energy index, bills, power quality, thermal images, consumption profiles, and recommends improvements to recover waste energy and switch to cheaper fuels to reduce costs. Key performance indicators like specific power consumption and pump efficiency are calculated. The goal is to identify savings through optimization and use of renewable energy.
Energy Audit
This document summarizes a presentation on conducting home energy audits. It discusses the purpose of energy audits as identifying energy losses and opportunities for improved energy performance. The methodology involves a three-phase process of pre-audit, audit, and post-audit. Observations from conducted audits show LED lighting uses less power than CFL or incandescent for the same brightness. Ceiling fans at lower speeds and more efficient refrigerators, washing machines, pumps, and electronics can reduce energy consumption. Tips provided encourage choosing energy star rated products and adjusting settings for maximum efficiency.
Session 04 - Instruments - Introduction
This document provides an introduction to instruments used in process control industries. It describes the main components of an instrumentation system, including sensors, transducers, converters, transmitters, indicators, recorders, controllers, final control elements, and actuators. Sensors measure process parameters and transducers convert these measurements to electrical signals. Transmitters then standardize these signals so they can be processed by other equipment for indication, alarms, or automatic control. Common controller types are PLCs and DCSs. Final control elements and actuators are used to physically affect the process. The next session will cover sensors and transmitters in more detail.
day 3: Control Concepts & BMS
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Innovation in Air Conditioning
This document provides guidance on achieving long-term building efficiency. It notes that existing buildings will need to be refurbished to meet carbon reduction targets and that operational costs, including energy usage, can be controlled through efficiency measures. Quick wins are possible by improving controls, maintenance, and replacing older equipment. Advanced control systems and technologies like heat recovery can significantly reduce energy consumption.
Energy management and energy audit consultancy
This document provides information on energy management, energy audits, and related training programs. It discusses:
- The background and goals of energy management in reducing costs through monitoring, controlling, and conserving energy.
- Target audiences for energy management and energy auditing training including technical managers, engineers, and government employees.
- Benefits of energy management training such as cost savings, developing energy policies, and regulatory compliance.
- An overview of energy auditing including examining current energy usage and identifying savings opportunities.
Air Compressor Service Plans by Atlas Copco
Learn what factors influence the compressed air system, why air compressors need servicing, what maintenance plans are available, and how can they help you optimize your compressed air system. Atlas Copco Compressors UK & Ireland offers Customer Support Plans for air compressor maintenance tailored to your specific compressed air installation and budget.
Predictive maintenance of an intelligent FCU
This document discusses predictive maintenance of an intelligent fan coil unit. An intelligent fan coil unit has additional sensors beyond standard units, including air velocity sensors and inlet/outlet water coil temperature sensors. Predictive maintenance of the intelligent unit monitors delta T, approach temperature, and temperature cross of the coil to check performance. It also monitors air filter life. This strategy aims to reduce maintenance costs and time by 67% or more by scheduling maintenance only when needed based on sensor data.
Energy conservation Opportunities - Offices
- Offices can significantly reduce energy consumption through small behavioral and equipment changes.
- Simple actions like switching off lights and electronics when not in use, keeping thermostats at higher temperatures, and ensuring efficient equipment can lower costs and reduce environmental impacts.
- Proper maintenance, utilizing daylight, and recovering waste energy also contribute to energy savings. Monitoring consumption patterns identifies opportunities to conserve more energy.
Feedback control: Handout1
This document provides an introduction to feedback control systems for agricultural engineering. It discusses key concepts in control systems including open vs closed loop control, continuous vs sequential control, and control system components like sensors, controllers, and actuators. Different types of control systems are described for applications like machine control, process control, analog systems, and digital systems. Terminology used in control systems like controlled variables, manipulates variables, and disturbances are also defined. The document outlines topics that will be covered, including modeling, analysis, design, and mathematical methods like Laplace transforms, transfer functions, and linearization.
2014_NA_Testing_Expo_Open_Technology_Forum_Jesudowich
This document discusses imc's climatic measurement systems for both road-based and facility-based testing. It addresses the challenges of increasing measurement requirements and the need for comparable test procedures and results across different testing environments. The imc systems provide modular, expandable solutions for mixed-signal measurement with large channel counts, CAN/LIN measurement, and compatibility across testing types and facilities. Key advantages include synchronization of all systems, real-time calculations, robust designs for harsh environments, and minimizing reconfiguration time between tests. Major automotive customers are realizing measurement and control solutions using imc to fulfill both dynamic and climatic cell-based testing.
Session 03 - History of Automation and Process Introduction
In this session you will learn:
History of Industrial Automation
Types of Industrial Automation
Process Industries
Overview of Continuous & Batch Process
Energy management and energy audit
Energy management aims to reduce unnecessary energy use and improve efficiency. Its key techniques include raising public awareness, reengineering systems, and upgrading technology. A crucial first step is conducting an energy audit to identify all opportunities to cut costs. Priority is then given to opportunities when implementing an energy action plan. Maintaining efficiency improvements over the long run is also important for effective energy management.
Instruments - Introduction
This document provides an introduction to instrumentation in process control industries. It defines key instrumentation terms like sensors, transducers, converters, transmitters, indicators, recorders, controllers, final control elements, and actuators. Sensors measure process parameters and transmitters convert the sensor signals to standard signals. Indicators display readings while recorders gather data for trend analysis. Controllers receive measurements, compare to setpoints, and signal control elements like valves to correct deviations. Actuators cause physical changes in control elements in response to controller signals. The next session will cover sensors and transmitters in more detail.
Energy audit & conservation studies for industries
Informative presentation on methodology for carrying out Energy Audit & Energy Conservation Studies for Industries
Oil production3
The document provides an outline and overview of key systems involved in oil production, including control and safety systems, power generation and distribution, flare and atmospheric ventilation, instrument air, HVAC, water systems, chemicals and additives, and telecom. It then provides more detailed descriptions of processes control, emergency shutdown systems, condition monitoring, production information management systems, and training simulators.
Aspects of Energy Audit-Energy Audit Company in India
MGCS is an energy audit company in India. We do energy audit by BEE Certified energy auditor to save on cost.
More Related Content
What's hot
Energy Audit of a Food Industry
The Energy Audit would give a positive orientation for implementing the energy cost
reduction, preventive maintenance and quality control programmes which are vital for production and
utility activities. Energy Audit is the translation of conservation ideas into realities, by lending
technically feasible solutions with economic and other organizational considerations within a specified
time frame. This thesis deals with the identification of nature of losses in industry that manufacturers
food products. The energy accounting with the use of measuring instruments like lux-meter, power and
harmonic analyzer etc. helps to record and analyze data of energy usage. With the help of this data,
energy wastage and losses are calculated and recommendations are given to reduce these losses and
improve savings. Lastly, to deal with the issues of power quality, power quality assessment is done at
PCC.
Measure and analyze - Thermal energy metering learn about new federal regulat...
Measurement Canada (MC) is launching a new program which will require that all thermal energy meters be Type Approved when used in trade for the measurement of heat energy by the year 2021. Thermal energy meters are flow meters used in a heat exchange circuit, where heat is given up (heating) or absorbed (cooling) by a heat conveying liquid. How MC establishes the Terms and Conditions that will be used to regulate this practice will be outlined. How thermal energy meters must meet the applicable requirements of the Weights and Measures Act and Regulations will be explained.
Instruments - Part 2
In this session you will learn:
Instruments
Transmitters
Control valves
Valve actuators
Valve positioner
For more information, visit: https://www.mindsmapped.com/courses/industrial-automation/complete-training-on-industrial-automation-for-beginners/
Bioreactor control system
This document discusses bioreactor control systems. It describes different types of control systems including manual control, automatic control, two-position controllers, proportional control, integral control, and derivative control. It explains that automatic control systems use four basic components: a measuring element, controller, final control element, and the process to be controlled. The document also summarizes different combinations of control methods, such as proportional plus integral control and proportional plus integral plus derivative control.
Qeraton Intro- Energy Audits
Qeraton Arabia provides energy auditing services to help clients lower energy costs and protect the environment. They conduct in-depth audits that include analyzing historical energy use, on-site measurements, identifying potential efficiency solutions, engineering and economic analysis of modifications, and reporting. The audits assess various equipment and utilities, using tools like power loggers, thermography, and ultrasound scanning. The audit team includes energy auditors and technicians. The final deliverables are a presentation of findings and recommendations, and a comprehensive report with technical inventory, consumption analysis, efficiency measures, and financial analysis.
Energy audit & conservation studies for commercial premises
This document provides an overview of the scope and instruments used for an energy audit of commercial premises conducted by Senergy Consultants. The energy audit evaluates energy performance, bills, equipment efficiency, lighting, air quality, and distribution systems. It analyzes the energy index, bills, power quality, thermal images, consumption profiles, and recommends improvements to recover waste energy and switch to cheaper fuels to reduce costs. Key performance indicators like specific power consumption and pump efficiency are calculated. The goal is to identify savings through optimization and use of renewable energy.
Energy Audit
This document summarizes a presentation on conducting home energy audits. It discusses the purpose of energy audits as identifying energy losses and opportunities for improved energy performance. The methodology involves a three-phase process of pre-audit, audit, and post-audit. Observations from conducted audits show LED lighting uses less power than CFL or incandescent for the same brightness. Ceiling fans at lower speeds and more efficient refrigerators, washing machines, pumps, and electronics can reduce energy consumption. Tips provided encourage choosing energy star rated products and adjusting settings for maximum efficiency.
Session 04 - Instruments - Introduction
This document provides an introduction to instruments used in process control industries. It describes the main components of an instrumentation system, including sensors, transducers, converters, transmitters, indicators, recorders, controllers, final control elements, and actuators. Sensors measure process parameters and transducers convert these measurements to electrical signals. Transmitters then standardize these signals so they can be processed by other equipment for indication, alarms, or automatic control. Common controller types are PLCs and DCSs. Final control elements and actuators are used to physically affect the process. The next session will cover sensors and transmitters in more detail.
day 3: Control Concepts & BMS
The document discusses the benefits of exercise for mental health. Regular physical activity can help reduce anxiety and depression and improve mood and cognitive function. Exercise causes chemical changes in the brain that may help protect against mental illness and improve symptoms.
Innovation in Air Conditioning
This document provides guidance on achieving long-term building efficiency. It notes that existing buildings will need to be refurbished to meet carbon reduction targets and that operational costs, including energy usage, can be controlled through efficiency measures. Quick wins are possible by improving controls, maintenance, and replacing older equipment. Advanced control systems and technologies like heat recovery can significantly reduce energy consumption.
Energy management and energy audit consultancy
This document provides information on energy management, energy audits, and related training programs. It discusses:
- The background and goals of energy management in reducing costs through monitoring, controlling, and conserving energy.
- Target audiences for energy management and energy auditing training including technical managers, engineers, and government employees.
- Benefits of energy management training such as cost savings, developing energy policies, and regulatory compliance.
- An overview of energy auditing including examining current energy usage and identifying savings opportunities.
Air Compressor Service Plans by Atlas Copco
Learn what factors influence the compressed air system, why air compressors need servicing, what maintenance plans are available, and how can they help you optimize your compressed air system. Atlas Copco Compressors UK & Ireland offers Customer Support Plans for air compressor maintenance tailored to your specific compressed air installation and budget.
Predictive maintenance of an intelligent FCU
This document discusses predictive maintenance of an intelligent fan coil unit. An intelligent fan coil unit has additional sensors beyond standard units, including air velocity sensors and inlet/outlet water coil temperature sensors. Predictive maintenance of the intelligent unit monitors delta T, approach temperature, and temperature cross of the coil to check performance. It also monitors air filter life. This strategy aims to reduce maintenance costs and time by 67% or more by scheduling maintenance only when needed based on sensor data.
Energy conservation Opportunities - Offices
- Offices can significantly reduce energy consumption through small behavioral and equipment changes.
- Simple actions like switching off lights and electronics when not in use, keeping thermostats at higher temperatures, and ensuring efficient equipment can lower costs and reduce environmental impacts.
- Proper maintenance, utilizing daylight, and recovering waste energy also contribute to energy savings. Monitoring consumption patterns identifies opportunities to conserve more energy.
Feedback control: Handout1
This document provides an introduction to feedback control systems for agricultural engineering. It discusses key concepts in control systems including open vs closed loop control, continuous vs sequential control, and control system components like sensors, controllers, and actuators. Different types of control systems are described for applications like machine control, process control, analog systems, and digital systems. Terminology used in control systems like controlled variables, manipulates variables, and disturbances are also defined. The document outlines topics that will be covered, including modeling, analysis, design, and mathematical methods like Laplace transforms, transfer functions, and linearization.
2014_NA_Testing_Expo_Open_Technology_Forum_Jesudowich
This document discusses imc's climatic measurement systems for both road-based and facility-based testing. It addresses the challenges of increasing measurement requirements and the need for comparable test procedures and results across different testing environments. The imc systems provide modular, expandable solutions for mixed-signal measurement with large channel counts, CAN/LIN measurement, and compatibility across testing types and facilities. Key advantages include synchronization of all systems, real-time calculations, robust designs for harsh environments, and minimizing reconfiguration time between tests. Major automotive customers are realizing measurement and control solutions using imc to fulfill both dynamic and climatic cell-based testing.
Session 03 - History of Automation and Process Introduction
In this session you will learn:
History of Industrial Automation
Types of Industrial Automation
Process Industries
Overview of Continuous & Batch Process
Energy management and energy audit
Energy management aims to reduce unnecessary energy use and improve efficiency. Its key techniques include raising public awareness, reengineering systems, and upgrading technology. A crucial first step is conducting an energy audit to identify all opportunities to cut costs. Priority is then given to opportunities when implementing an energy action plan. Maintaining efficiency improvements over the long run is also important for effective energy management.
Instruments - Introduction
This document provides an introduction to instrumentation in process control industries. It defines key instrumentation terms like sensors, transducers, converters, transmitters, indicators, recorders, controllers, final control elements, and actuators. Sensors measure process parameters and transmitters convert the sensor signals to standard signals. Indicators display readings while recorders gather data for trend analysis. Controllers receive measurements, compare to setpoints, and signal control elements like valves to correct deviations. Actuators cause physical changes in control elements in response to controller signals. The next session will cover sensors and transmitters in more detail.
Energy audit & conservation studies for industries
Informative presentation on methodology for carrying out Energy Audit & Energy Conservation Studies for Industries
What's hot (20)
Measure and analyze - Thermal energy metering learn about new federal regulat...
Measure and analyze - Thermal energy metering learn about new federal regulat...
Energy audit & conservation studies for commercial premises
Energy audit & conservation studies for commercial premises
2014_NA_Testing_Expo_Open_Technology_Forum_Jesudowich
2014_NA_Testing_Expo_Open_Technology_Forum_Jesudowich
Session 03 - History of Automation and Process Introduction
Session 03 - History of Automation and Process Introduction
Energy audit & conservation studies for industries
Energy audit & conservation studies for industries
Similar to ENERGY AUDIT
Oil production3
The document provides an outline and overview of key systems involved in oil production, including control and safety systems, power generation and distribution, flare and atmospheric ventilation, instrument air, HVAC, water systems, chemicals and additives, and telecom. It then provides more detailed descriptions of processes control, emergency shutdown systems, condition monitoring, production information management systems, and training simulators.
Aspects of Energy Audit-Energy Audit Company in India
MGCS is an energy audit company in India. We do energy audit by BEE Certified energy auditor to save on cost.
The Secret to Controlling Excessive Energy Consumption & Cost
Complex utility rate structures like peak demand rates, low power factor penalties, and time-of-use charges plague industrial owners and operators. Extremely volatile energy usage suggests the management of high energy costs is a necessary evil.
Unfortunately, few systems are in place to monitor and control energy usage, which leads to company-wide inefficiency and spikes in operational costs. By examining a manufacturing case study, discover how a modified control sequence allowed operators to initiate automated energy conservation modes to manage consumption and eliminate excessive spikes during peak demand.
Learn to implement conservation control strategies through an industrial power management system, identify power quality inefficiencies that lead to additional manufacturing costs, and optimize facility operation by adjusting equipment set points, processes, and production schedules in relation to utility tariffs.
jayakumarcv
S. Jaya Kumar has over 30 years of experience in instrumentation, including 17 years in the oil and gas sector. He has extensive experience commissioning and maintaining control systems, turbines, compressors, and other equipment. Some of his roles include supervising instrumentation installation and commissioning of a steam boiler and compressor in Nigeria. He is proficient in DCS systems, PLCs, vibration monitoring, and calibrating process instruments.
Overview of solutions for machine monitoring
Presentation showing condition monitoring solutions for rotating machines from KONČAR Institute. The solutions are divided in two big groups:
1. Compact stationary monitoring solutions
2. Portable monitoring and diagnostic instruments
Overall 13 solutions are presented with description of market, applications, value propositions, etc.
Facility inspector resume
Nagadevan Govindan is an experienced facility inspector seeking a position utilizing his 8 years of experience managing operations and maintenance of manufacturing, construction, and community infrastructure facilities. He has experience overseeing electrical, instrumentation, mechanical, health and safety systems. His background includes roles as an EHS executive, facility officer, and safety engineer where he implemented compliance programs and emergency response plans.
Energy Systems & Maintenance - Class Presentation
This document discusses the importance of maintenance for energy efficiency. It outlines the objectives of highlighting the role of maintenance in energy costs, discussing maintenance for major energy-consuming sectors, and emphasizing a continuous improvement approach. Benefits of maintenance include preventing equipment failure, ensuring safety, controlling energy costs, and maintaining quality. The document then provides details on setting up an energy management maintenance program with planning, monitoring, analysis and continuous improvement. Key aspects covered for various energy systems include identifying energy-related maintenance, estimating present maintenance costs, determining equipment conditions, prioritizing tasks, and developing initial monitoring procedures.
Inst maint practices
This document discusses instrument maintenance practices at National Fertilizers Limited, a chemical process industry. It outlines the importance of instrumentation in process industries and describes various types of control loops used. It then discusses different types of maintenance practices including day-to-day, preventative, shutdown, and breakdown maintenance. Finally, it outlines upgrades made to instrumentation systems, including implementing a distributed control system and programmable logic controllers, to improve reliability, efficiency, and use of latest technologies.
Inst maint practices
This document discusses instrument maintenance practices at National Fertilizers Limited, a chemical process industry. It outlines the importance of instrumentation in process industries and describes various types of control loops used. It then discusses different types of maintenance practices including day-to-day, preventative, shutdown, and breakdown maintenance. Finally, it outlines upgrades made to instrumentation systems, including replacing old pneumatic and single loop controllers with a distributed control system and programmable logic controllers to improve reliability, efficiency, and optimization.
Md. Habibullah Belali 221-33-1522 Control System in Thermal Power Plant.pptx
Md. Habibullah Belali 221-33-1522 Control System in Thermal Power Plant
Energy Audit.pptx
This document provides an overview of energy audits and the Bureau of Energy Efficiency (BEE) certification process in India. It discusses the purpose and methodology of preliminary and detailed energy audits. It also outlines the role of State Designated Agencies (SDAs) in implementing energy conservation activities at the state level in accordance with the Energy Conservation Act. The certification provided by BEE regulates energy efficiency standards and guidelines for organizations.
Overview of Water cycles, wastewater treatment processes, wastewater plant en...
Presented by Adim Altalibi at the AEP Ohio Water/Waste Water Customer Seminar at Zane State in Zanesville, Ohio
Installation Operation & Maintenance of 33kV & 11kV Switchgear
In-Country Training On Operation, Maintenance, Protection & Control of 33/11 kV Substation Project Name: Design, Supply, Installation, Testing & Commissioning of 33/11 kV sub-stations with source end feeder bays. Contract No: BREB/UREDS/W-01A-001/02/2016-2017 BREB/UREDS/W-01A-002/03/2016-2017 BREB/UREDS/W-01A-004/04/2016-2017
Pneumatics & Hydraulics
This document discusses pneumatic systems and their components. It covers the basics of pneumatic systems including common components like compressors, filters, dryers, receivers, control valves and actuators. It also discusses the gases used, advantages and disadvantages of pneumatic systems, applications, electro-pneumatic controllers and system diagrams. Hydraulic systems are mentioned but not described in detail.
EIT_Presentation
The document provides an overview of Ernst de Villiers' EIT evaluation presentation covering various departments within Eskom's power plant maintenance division. It discusses:
1) Eskom's life saving rules and departments visited including power plant maintenance, standards implementation, and control plant maintenance-metering.
2) Key aspects of the power plant maintenance department including voltage regulators, reclosers, and the standards and processes around their maintenance and operation.
3) The role and processes of the standards implementation department relating to technical forums, non-conformance reporting, and material inspections.
Efficiency improvement by Energy optimization programme in Energy intensive i...
Study of operation of entire power plant and recommend best solution for optimizing the efficiency where ever possible. study of thermal systems as well as electrical system in energy intensive industry. Study of the power plant and achieve maximum efficiency through Analyse the energy performance. Energy performance of heat loss by the system , which include radiation and convection loss by the system. leading to energy and cost savings where ever possible. Performance assessment of steam distribution system which is a valuable source of heat and pure water and condensate recovery through steam trap management
My results reveal that industry does not care about the energy management and there is an energy efficiency gap which is resulting lack of energy technology provided by the industry .It was reveal that the energy saving measures in the industry have potential to recover these energy wastage and implement energy efficient technology.
Introduction to energy audit part 2
This a compilation of the overall process in conducting energy audit based on my personal experiences, training that I attended in Malaysia, India and Japan and information sharing between fellow EE practitioners.Not to forget references from books and internet.
I believe this would benefit to those who wants to understand what is energy audit all about for beginners to become an energy auditor and to facilities owners to assess the need to conduct energy audit and energy audit proposals submitted by consultants
Industrial energy efficiency techniques and energy management (1)
This document discusses industrial energy efficiency and energy management. It describes why energy efficiency is important due to rising energy prices, energy security, climate change, and green jobs. The main systems that consume energy in industry are identified as HVAC, compressed air, heating/cooling, electrical, lighting, motors, boilers, refrigeration, drying, and waste treatment. Energy management and industrial energy audits are defined as tools to optimize energy usage and identify opportunities to reduce energy consumption and costs. Preliminary and detailed energy audit methodologies are outlined.
2 smart energy management junio'15
The document outlines the process for implementing a smart energy management system, including conducting an initial facility study to collect energy consumption and building data, setting up a monitoring system with sensors and software to track energy usage, analyzing the data to identify areas for improved efficiency, developing an action plan to implement efficiency solutions, and establishing after-market support to ensure the system delivers ongoing benefits. The goal is to provide detailed insight into energy usage in order to develop a strategy to increase competitiveness through reduced costs from improved energy efficiency.
updated_ashishmalhotra
Ashish Malhotra is seeking a career in an organization where he can grow with the company. He has 6 years of experience in control and instrumentation installation, commissioning, and maintenance. His experience includes commissioning control and instrumentation systems for the balance of plant areas like water treatment, fire fighting, emission monitoring, and cooling systems of multiple thermal power plants totaling 600MW capacity. He has a bachelor's degree in electronics and communication engineering and is proficient in SAP, safety training, and instrumentation calibration.
Similar to ENERGY AUDIT (20)
Aspects of Energy Audit-Energy Audit Company in India
Aspects of Energy Audit-Energy Audit Company in India
The Secret to Controlling Excessive Energy Consumption & Cost
The Secret to Controlling Excessive Energy Consumption & Cost
Md. Habibullah Belali 221-33-1522 Control System in Thermal Power Plant.pptx
Md. Habibullah Belali 221-33-1522 Control System in Thermal Power Plant.pptx
Overview of Water cycles, wastewater treatment processes, wastewater plant en...
Overview of Water cycles, wastewater treatment processes, wastewater plant en...
Installation Operation & Maintenance of 33kV & 11kV Switchgear
Installation Operation & Maintenance of 33kV & 11kV Switchgear
Efficiency improvement by Energy optimization programme in Energy intensive i...
Efficiency improvement by Energy optimization programme in Energy intensive i...
Industrial energy efficiency techniques and energy management (1)
Industrial energy efficiency techniques and energy management (1)
ENERGY AUDIT
- 1. ENERGY AUDIT
- 2. • An energy audit is an inspection,survey,and analysis of energy flows for energy conservation in building,process or system to reduce the amount of energy input into the system without negetively affecting the output.
- 3. PROJECT COMPLETED • MADURAI INTERNATIONAL AIRPORT • VIJAYAWADA DOMESTIC AIRPORT • KERALA STATE BAMBOO CORPORATION • MILMA DIARIES &CHILLING PLANTS
- 4. METERS USED IN AUDIT • POWER QUALITY ANALYSER ALM 30,ALM 35 • THERMO ANIMO METER • LUX METER • TEMPERATURE SENSOR • ULTRA SONIC FLOW METER • TESTO 480-HIGH END VAC MEASURING INSTRUMENT • FLUE GAS ANALYZER
- 5. • Short listing critical equipment area on the basis of High rated equipment Critical area in the process ENCON area identified during primary walk through audit. • Secondary data gathering:Energy bill,fuel consumption details,water consumption details,raw material& finished goods details
- 6. • Data Loggings 24 hour Power monitoring of the secondary side of the transformer,power monitoring of energy related systems and sub panels of the system,load variation trends in pumps,fans and motors.Energy efficiency&performance of the equipments.
- 7. • Conduct Equipment& lighting survey with portable instruments for collection of more and accurate data.Measuring the lux of each point of the room ,also measuring the room area for lux measuring. • HVAC System power consumption conjunction with mechancal measurments. • DG system power consumption and SEGR calculation.
- 8. • Checking the compressor efficiency & power consumption during the loading and unloading of the air in the reciever for its minimum cutoff pressure. • After the premilinery audit we had a discussion with management&staffs of the company and conduct a presentation for their energy usage and consumpation,also giving the suggestions to reduce the energy consumption without negetively affecting the system.
- 9. • Finally reporting & presentation top management . • suggestion to become implementation, then follow up an periodic review.