I am Moffat K. I am a Hydraulic Engineering Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Engineering, from Harvard University, USA. I have been helping students with their assignments for the past 8 years. I solve assignments related to Hydraulic Engineering.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Hydraulic Engineering Assignments.
SPLIT SECOND ANALYSIS COVERING HIGH PRESSURE GAS FLOW DYNAMICS AT PIPE OUTLET...AEIJjournal2
A detailed investigation covering piped gas flow characteristics in high pressure flow conditions. Such flow analysis can be resolved using established mathematical equations known as the Fanno condition, which usually cover steady state, or final flow conditions. However, in real life, such flow conditions are
transient, varying with time. This paper uses CFD analysis providing a split second “snapshot” at what happens at the pipe outlet, and therefore, a closer understanding at what happens at the pipe’s outlet in high pressure gas flow condition
Obtain average velocity from a knowledge of velocity profile, and average temperature from a knowledge of temperature profile in internal flow.
Have a visual understanding of different flow regions in internal flow, and calculate hydrodynamic and thermal entry lengths.
Analyze heating and cooling of a fluid flowing in a tube under constant surface temperature and constant surface heat flux conditions, and work with the logarithmic mean temperature difference.
Obtain analytic relations for the velocity profile, pressure drop, friction factor, and Nusselt number in fully developed laminar flow.
Determine the friction factor and Nusselt number in fully developed turbulent flow using empirical relations, and calculate the heat transfer rate.
SPLIT SECOND ANALYSIS COVERING HIGH PRESSURE GAS FLOW DYNAMICS AT PIPE OUTLET...AEIJjournal2
A detailed investigation covering piped gas flow characteristics in high pressure flow conditions. Such flow analysis can be resolved using established mathematical equations known as the Fanno condition, which usually cover steady state, or final flow conditions. However, in real life, such flow conditions are
transient, varying with time. This paper uses CFD analysis providing a split second “snapshot” at what happens at the pipe outlet, and therefore, a closer understanding at what happens at the pipe’s outlet in high pressure gas flow condition
Obtain average velocity from a knowledge of velocity profile, and average temperature from a knowledge of temperature profile in internal flow.
Have a visual understanding of different flow regions in internal flow, and calculate hydrodynamic and thermal entry lengths.
Analyze heating and cooling of a fluid flowing in a tube under constant surface temperature and constant surface heat flux conditions, and work with the logarithmic mean temperature difference.
Obtain analytic relations for the velocity profile, pressure drop, friction factor, and Nusselt number in fully developed laminar flow.
Determine the friction factor and Nusselt number in fully developed turbulent flow using empirical relations, and calculate the heat transfer rate.
Heat Transfer Analysis of Refrigerant Flow in an Evaporator TubeIJMER
the paper aim is to presenting the heat transfer analysis of refrigerant flow in an evaporator
tube is done. The main objective of this paper is to find the length of the evaporator tube for a pre-defined
refrigerant inlet state such that the refrigerant at the tube outlet is superheated. The problem involves
refrigerant flowing inside a straight, horizontal copper tube over which water is in cross flow. Inlet
condition of the both fluids and evaporator tube detail except its length are specified. here pressure and
enthalpy at discrete points along the tube are calculated by using two-phase frictional pressure drop model.
Predicted values were compared using another different pressure drop model. A computer-code using
Turbo C has been developed for performing the entire calculation
I am Dave J. I am a Nuclear Engineering Exam Helper at liveexamhelper.com. I hold a Masters' Degree in Nuclear Physics from, University of Chicago, USA. I have been helping students with their exams for the past 12 years. You can hire me to take your exam in Nuclear Engineering.
Visit liveexamhelper.com or email info@liveexamhelper.com.
You can also call on +1 678 648 4277 for any assistance with the Nuclear Engineering exams.
Heat Transfer Analysis of Refrigerant Flow in an Evaporator TubeIJMER
the paper aim is to presenting the heat transfer analysis of refrigerant flow in an evaporator
tube is done. The main objective of this paper is to find the length of the evaporator tube for a pre-defined
refrigerant inlet state such that the refrigerant at the tube outlet is superheated. The problem involves
refrigerant flowing inside a straight, horizontal copper tube over which water is in cross flow. Inlet
condition of the both fluids and evaporator tube detail except its length are specified. here pressure and
enthalpy at discrete points along the tube are calculated by using two-phase frictional pressure drop model.
Predicted values were compared using another different pressure drop model. A computer-code using
Turbo C has been developed for performing the entire calculation
I am Dave J. I am a Nuclear Engineering Exam Helper at liveexamhelper.com. I hold a Masters' Degree in Nuclear Physics from, University of Chicago, USA. I have been helping students with their exams for the past 12 years. You can hire me to take your exam in Nuclear Engineering.
Visit liveexamhelper.com or email info@liveexamhelper.com.
You can also call on +1 678 648 4277 for any assistance with the Nuclear Engineering exams.
This presentation had been prepared for the aircraft propulsion class to my undergraduate and graduate students at Kasetsart University and Chulalongkorn University - Bangkok, Thailand.
The understanding of two-phase flow and heat transfer
with phase change in minichannels is needed for the design and
optimization of heat exchangers and other industrial
applications. In this study a three-dimensional numerical model
has been developed to predict filmwise condensation heat
transfer inside a rectangular minichannel. The Volume of Fluid
(VOF) method is used to track the vapor-liquid interface. The
modified High Resolution Interface Capture (HRIC) scheme is
employed to keep the interface sharp. The governing equations
and the VOF equation with relevant source terms for
condensation are solved. The surface tension is taken into
account in the modeling and it is evaluated by the Continuum
Surface Force (CSF) approach. The simulation is performed
using the CFD software package, ANSYS FLUENT, and an inhouse
developed code. This in-house code is specifically
developed to calculate the source terms associated with phase
change. These terms are deduced from Hertz-Knudsen equation
based on the kinetic gas theory. The numerical results are
validated with data obtained from the open literature. The
standard k-ω model is applied to model the turbulence through
both the liquid and vapor phase. The numerical results show
that surface tension plays an important role in the condensation
heat transfer process. Heat transfer enhancement is obtained
due to the presence of the corners. The surface tension pulls the
liquid towards the corners and reduces the average thermal
resistance in the cross section.
Similar to Hydraulic Engineering Assignment Help (20)
I am Calisto Dante. Currently associated with eduassignmenthelp.com as a Digital Communication Assignment Help Expert. After completing my Master's in Digital Communication from, OCAD University in Toronto, Canada. I was in search of an opportunity that expands my area of knowledge hence I decided to help students with their assignments. I have written several digital communication assignments to date to help students overcome numerous difficulties they face.
I am Shane Bruce. I love exploring new topics. Academic writing seemed an interesting option for me. After working for many years with eduassignmenthelp.com, I have assisted many students with their assignments. I can proudly say, each student I have served is happy with the quality of the solution that I have provided. I have acquired my Master’s Degree in MATLAB, from Curtin University in Perth, Australia.
I am Aaron Wyatt. I am a Digital Communication Assignment Expert at eduassignmenthelp.com. I hold a Master’s Degree in MATLAB, from Aston University, England. I have been helping students with their assignments for the past 15 years. I solve assignments related to Digital Communication. Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Digital Communication Assignments.
I am John Klok. I am an Electromechanics Assignment Expert at eduassignmenthelp.com. I hold a Master’s Degree in Electromechanics, from Royal Roads University, Canada. I have been helping students with their assignments for the past 6 years. I solve homework related to Electromechanics. Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Electromechanics Assignments.
I am Moffat D. I am a Magnetic Materials Assignment Expert at eduassignmenthelp.com. I hold a Master’s Degree in Electromagnetic, from The University of Liverpool, UK. I have been helping students with their assignments for the past 8 years. I solve assignments related to Magnetic Materials.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Magnetic Materials Assignments.
I am Nathan J. I am a Magnetic Materials Assignment Expert at eduassignmenthelp.com. I hold a Master’s Degree in Electromagnetic, from The University of Queensland, Australia. I have been helping students with their assignments for the past 12 years. I solve assignments related to Magnetic Materials.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Magnetic Materials Assignments.
I am Baddie K. I am a Magnetic Materials Assignment Expert at eduassignmenthelp.com. I hold a Masters's Degree in Electro-Magnetics, from The University of Malaya, Malaysia. I have been helping students with their assignments for the past 12 years. I solve assignments related to Magnetic Materials.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Magnetic Materials Assignments.
I am Arnold H. I am a Magnetic Materials Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Electro-Magnetics, from The University of Hertfordshire, UK. I have been helping students with their assignments for the past 6 years. I solve assignments related to Magnetic Materials.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Magnetic Materials Assignments.
I am Carl D. I am a Bimolecular Homework Expert at eduassignmenthelp.com. I hold a Master's in MSc, from DePaul University, Chicago. I have been helping students with their homework for the past 7 years. I solve homework related to Biomolecular.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Biomolecular Homework.
I am Craig D. I am a Physical Chemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Physical Chemistry, from The University of Queensland. I have been helping students with their homework for the past 9 years. I solve assignments related to Physical Chemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com. You can also call on +1 678 648 4277 for any assistance with Physical Chemistry Assignments.
I am Peterson N. I am a Physical Chemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Physical Chemistry, University of Melbourne, Australia. I have been helping students with their homework for the past 8 years. I solve assignments related to Physical Chemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Physical Chemistry Assignments.
I am Grey N. I am a Chemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Chemistry, from Calgary, Canada. I have been helping students with their homework for the past 6 years. I solve assignments related to Chemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Chemistry Assignments.
I am Grey N. I am a Physical Chemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Physical Chemistry, from Calgary, Canada. I have been helping students with their homework for the past 6 years. I solve assignments related to Physical Chemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Physical Chemistry Assignments.
I am Frank P. I am a Physical Chemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Physical Chemistry, from Malacca, Malaysia. I have been helping students with their homework for the past 6 years. I solve assignments related to Physical Chemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Physical Chemistry Assignments.
I am George P. I am a Chemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Chemistry, from Perth, Australia. I have been helping students with their homework for the past 6 years. I solve assignments related to Chemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Chemistry Assignments.
I am Samantha K. I am a Physics Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Physics, from McGill University, Canada. I have been helping students with their homework for the past 8 years. I solve assignments related to Physics.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Physics Assignments.
I am John G. I am a Chemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Chemistry, from London, UK. I have been helping students with their homework for the past 6 years. I solve assignments related to Chemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Chemistry Assignments.
I am Terry K . I am a Semiconductor Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Semiconductor, from the University of Chicago, USA. I have been helping students with their homework for the past 8 years. I solve assignments related to Semiconductor.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Semiconductor Assignments.
I am Anastasia L. I am a Biochemistry Assignment Expert at eduassignmenthelp.com. I hold a Ph.D. in Biochemistry, from Clemson University, USA. I have been helping students with their homework for the past 6 years. I solve assignments related to Biochemistry.
Visit eduassignmenthelp.com or email info@eduassignmenthelp.com.
You can also call on +1 678 648 4277 for any assistance with Biochemistry Assignments.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
1. For any help regarding Hydraulic Engineering Assignment Help
Visit :- https://www.eduassignmenthelp.com/
Email :- info@eduassignmenthelp.com
call us at :- +1 678 648 4277
2. Problem 1 (30%) – Hydraulic analysis of the PWR primary system at cold zero-
power conditions
A greatly-simplified schematic of the PWR primary system is shown in Figure 1. The
core and steam generators are represented by two form losses of coefficients 7 and 4,
respectively. The loop can be modeled as a series of four identical round tubes of 1.45 m
ID and 10 m length. The flow within the loop is driven by a pump that delivers a
constant head, ΔPpump=200 kPa, regardless of the flow.
Figure 1. Simplified schematic of the PWR primary system
3. You are to evaluate the hydraulic behavior of the system at cold zero-power conditions. In
this situation the fluid can be considered isothermal at 20°C and atmospheric pressure.
The properties of water at this temperature and pressure are reported in Table 1.
i) Calculate the steady-state mass flow rate in the system. Clearly state all your
assumptions. (10%)
ii) Now consider flow start-up from stagnant conditions. At t=0 the pump is turned on
and the flow is established. Calculate the time it takes for the mass flow rate to reach
50% of its steady-state value. (15%) (Hint: use the following integral
iii) A nuclear engineer wishes to simulate the PWR primary system by means of an
experimental flow loop with the same form coefficients and geometrically similar, but
of 1/10 scale (the pump head is also scaled down to 1/10). Would such loop have the
same time constant of the PWR primary system? (5%)
Assumptions:
- Neglect the acceleration and friction terms (Facc and Ffric, respectively) in the
momentum equation.
Table 1. Water properties at 20°C.
4. Problem 2 (25%) – Surface tension effects in borated water draining from a BWR
Standby Liquid Control Tank.
BWRs have a Standby Liquid Control Tank (SLCT) containing highly-borated water at
room temperature that can be injected into the core, should the control rods fail to
shutdown the reactor during an accident. Over a long period of time, borated water
corrosion has created a small round hole of 0.5 mm diameter on the bottom of the
SLCT (Figure 2a). The contact angle between borated water and the SLCT material is θ
= 120°. The surface tension of borated water at room temperature is 0.07 N/m, and its
density is about 1,000 kg/m3 . The initial liquid level in the SLCT is 1 m.
5. i) Assuming that the SLCT top is open to the atmosphere, would you expect the
borated water to completely drain from the hole? (10%)
If so, explain why.
If not, calculate the level at which draining would stop.
ii) Now assume that the contact angle is 60°. Does the tank drain completely? Explain.
(5%)
6. iii) To prevent draining, a fellow MIT nuclear engineering student suggests sealing the
tank top and put a cover gas (Figure 2b). Would this in fact prevent draining? Does the
contact angle affect your answer? (10%)
Problem 3 (25%) – Flow split between a heated and an adiabatic channel.
Consider the two parallel channels shown in Figure 3. They are connected only at the
inlet and outlet plena, and both have flow area A, equivalent diameter De and length L.
Channel 1 is heated ( is the total heat rate), while channel 2 is adiabatic. Channel 1 has
an orifice at the inlet (of form loss coefficient K). The boundary conditions are as
follows:
- The inlet plenum temperature is To
-The total mass flow rate is mtot &
- The outlet plenum pressure is PL
The fluid specific heat and thermal expansion coefficient are cp and β, respectively. The
density of the fluid can be calculated by means of the Boussinesq approximation with To
and ρo as the reference temperature and density, respectively.
7. Figure 3. Parallel channels connected at plena.
i) Find an expression for the mass flow rate in channel 1 in terms of the heat rate,
geometry and properties only. (15%) (Hint: assume steady-state upflow in both
channels)
ii) Find an expression for at which the mass flow rate in channel 2 becomes zero. (5%)
Q&
iii) What happens to the flow in channel 2, if the heat rate in channel 1 is increased
beyond the threshold calculated in “ii”? (5%) (Note: provide only a qualitative
answer)
8. Assumptions:
- Heating in channel 1 is axially uniform.
- Assume single-phase flow in the system.
- Neglect acceleration and friction terms in both channels.
- All thermophysical properties (except density) can be considered independent of
temperature.
Problem 4 (20%) – Quenching experiments to simulate boiling heat transfer
during a LB-LOCA.
To simulate boiling heat transfer on the surface of the fuel pins during a Large-Break
Loss Of Coolant Accident (LB-LOCA) in a PWR, a nuclear engineer has designed a
very simple quenching experiment, in which a small copper sphere (∼1 cm diameter) is
heated up to very high temperatures (∼1,000°C), and then dropped in a large pool of
water at atmospheric pressure.
i) What are the differences between the experiment and the actual reactor situation
that are likely to have an effect on boiling heat transfer? (5%)
ii) Write the energy conservation equation describing the temperature history (T vs. t) of
the copper sphere during a quenching experiment? (5%) (Hint: neglect the temperature
gradient within the sphere, describe boiling heat transfer at the surface of the sphere by
means of a heat transfer coefficient, and assume that the water bulk is saturated)
9. iii) The boiling curve for the experimental conditions is shown in Figure 4. Provide a
qualitative sketch of the sphere temperature history for an initial temperature of
1,500°C. (10%)
Figure 4. Boiling curve for a sphere in saturated water at 1 atm.
10. Problem 1 (30%) – Hydraulic analysis of the PWR primary system at cold zero-
power conditions
i) The momentum equation for the loop is:
where m is the mass flow rate, L=40 m is the total length of the loop, A=1.65 m2 is the
flow area, Kcore=7 and Ksg=4 are the form loss coefficients for the core and steam
generator, respectively. The acceleration and friction terms were neglected in Equation 1,
as per the problem statement. Moreover the gravity term is zero because the fluid is
isothermal.
At steady-state and Equation 1 can be easily solved for the steady-state mass
flow rate, mss:
ii) Equation 1 can be re-written as follows:
11. Equation 3 can be integrated to find m(t) during start-up. Separating the variables, making
use of the hint in the problem statement, and setting the initial condition m(0)=0, one gets:
where the time constant, τ, is defined as follows:
Equation 4 is plotted in Figure 1. The time it takes to reach 50% of the steady-state value
can be calculated by setting m=0.5⋅mss in Equation 4, and solving for t.
12. Figure 1. PWR primary system mass flow rate during cold zero-power start-up.
iii) Equation 5 indicates that the time constant is proportional to the loop length and
inversely proportional to the square root of the pump head. Thus, it can be concluded that
the time constant for the scaled-down loop will be lower than for the actual PWR primary
system by a factor of √10≈3.16.
Problem 2 (25%) – Surface tension effects in borated water draining from a BWR
Standby Liquid Control Tank.
13. i) The water pressure at the bottom of the tank, Pℓ, can be calculated as follows:
where Patm is the atmospheric pressure, ρℓ is the borated water density and L is the level
in the tank. Let us now focus on the liquid/air interface at the hole. For a contact angle
>90°, the effect of surface tension is to oppose draining. The condition for static
equilibrium (i.e., no draining) is:
where σ is the surface tension and r is the radius of curvature, which can be derived from
simple geometric considerations:
with dH=0.5 mm. Combining Equations 7 and 8, one gets the maximum level of borated
water that can be held up by the surface tension in the hole, Lmax:
Since the initial level is higher than Lmax, the borated water will drain until L=Lmax.
14. ii) If the contact angle is <90°, the tank will drain completely because surface tension no
longer opposes draining.
iii) If the tank top is sealed and there is a cover gas, the borated water will drain until the
cover gas pressure, Pcg, becomes sufficiently low. The condition for static equilibrium
is:
where the positive sign on the right-hand side applies to contact angles >90° and the
negative sign to contact angles <90°. Thus, the contact angle will affect the equilibrium
pressure of the cover gas, but at a certain point draining will stop regardless of the value
of the contact angle.
Problem 3 (25%) – Flow split between a heated and an adiabatic channel.
i) The mass equation for the system is:
where m1 and m2 are the mass flow rate in channels 1 and 2, respectively. The energy
equations are:
15. where T1L and T2L are the temperature at the outlet of channels 1 and 2, respectively.
The momentum equations are:
where Po is the inlet plenum pressure. Equations 12 through 16 are 5 equations in the 5
unknowns m& 1 , m& 2 , T1L, T2L and Po. Substituting Equation 13 into Equation 15,
eliminating Po from Equations 15 and 16, and solving for , one gets:
16. iii) If the heat rate in channel 1 is increased beyond , the flow in channel 2 actually
reverses. Explanation: in this system the column weight in channel 2 sets the pressure drop
for both channels (see Equation 16). Focus now on channel 1. Because of the heating, the
column weight in channel 1 is lower than the total pressure drop (Equation 15). So in
general, channel 1 will have higher flow rate than channel 2. When the heating is so high
that the flow rate in channel 1 is higher than the total flow rate m Qo & tot, the flow in
channel 2 has to reverse to satisfy continuity (Equation 12).
Problem 4 (20%) – Quenching experiments to simulate boiling heat transfer during a
LBLOCA.
i) The main differences are geometry (spherical vs. cylindrical) and materials (copper vs.
zirconium). Geometry differences will have an effect mostly on film boiling and DNB.
Materials differences will have an effect mostly on nucleate boiling. Because of
geometry, size and materials differences, the experiment and reactor situation will also
have different thermal capacities, and thus different time scales.
ii) The energy balance for the sphere is:
17. where ρ and Cp are the copper density and specific heat, respectively, T, V and S are the
sphere temperature, volume and surface, respectively, q" is the heat flux at the surface, h
is the heat transfer coefficient, and Tsat is the saturation temperature of water.
iii) The qualitative sketch of the sphere temperature history for an initial temperature of
1,500°C is shown in Figure 2. The sphere goes through all heat transfer regimes,
including transition boiling, because the situation is temperature controlled, not heat-flux
controlled. Note that the film boiling region has the longest duration because of its large
temperature width. The concavity of the T-t curve can be determined by differentiating
Equation 19:
Since the term is obviously positive, the concavity depends only on the
derivative of the heat flux with respect to temperature. Thus, the concavity is positive
for film boiling, nucleate boiling and natural convection, but is negative for transition
boiling.