The document discusses various technologies and material specifications for signage products including LED lit letters, face lit signs, router cut ACP signs, neon lights, backlit flex signs, clip-on signs, snap fit frames, PVC sheet signs, stainless steel plates, transparent name plates, lit vinyl signs, edge lit acrylic signs, hollow aluminum signs, curve signs, modular multi-panel signs, inserting frames, double sided backlit composite panels, self moving pictures, acrylic non-lit sandwich frames, lit sandwich frames, premium film, modular curved signs, frontlit outdoor signs using flex printing, glow in complete darkness signs, self-illuminated solar road studs, car stoppers, corner guards, conc

2. Technology-Channel Letters
Signage
material Specs-Providing,
fabricating installation and fixing of
LED LIT glass finish SS & acrylic letters
sides made of 20 gauge SS 304 sheet of
required size and shape with neatly
fabricated joints properly welded and
grinded with all corners rubbed and
polished with arrangement of screws
in the letters itself for mounting on the
walls including cost of screws and
fixing complete as per directions of
engineer.
provision- Wall mounted

3. Technology-Face lit
Signage
material Specs-
Providing, fabricating installation and
fixing of LED LIT glass finish SS &
acrylic letters sides made of 20 gauge
SS 304 sheet of required size and
shape with neatly fabricated joints
properly welded and grinded with all
corners rubbed and polished with Face
Acrylic Letters with Rich LED
Illuminations with arrangement of
screws in the letters itself for mounting
on the walls including cost of screws
and fixing complete as per directions of
engineer.
provision- Wall
mounted

4. Technology-Router Cut ACP
Signage
material Specs-Providing.
Fabricating and
fixing of ACP, ALUMINIUM Composite
Plastic Sings with 3mm ACP Sheet, Using
1" MS PIPE Frame, with anti Rust
Coating, Back with G.I. and 5 Sides with
ACP Sheet (alucoobond or equivalent
make), Lettering to be done with 5mm
Acrylic Sheet and Vinyl's if Needed
Backlit with Philips Slim Lite Tube light
Fittings, Acrylic Letters to Protrude out
and be lit, Together with A Timer for
Switching on and off Automatically at
Night and day including transportation
and fixing at Site as per the Direction of
the site Engineer.
Provision-Wall Mounted
ACP Backlit Signage

5. Technolgy-Neon Lights
Matrl.Specs-
Providing,fabricating and fixing
neon glow signages of approved
make with 100% handcraft glass
tubes in letter shape of required
colour of dia 9-12 mm including
making the electrical wiring for
illumination,transformer,connecti
on complete as per technical
specifications and directions of
engine.
Provision-Wall Mounted/on
structure

6. .
Technology- Backlit Flex
Matrl Specs.- Providing
fabricating installation and
fixing of backlit flex
signages on Hanwa/star 18
ounce flex signages printed
on high resolution
printermounted on MS
sheet on framed MS
structure further fixed on
24 gauge MS /GI box with
phylips/surya fittings
inside including
tranformers etc, electri
wiring etc complet
Provision-Wall
Mounted/Hanging

7. Technology-Clip-on
Matrl Specs.-Providing fabricating
installation and fixing of Aluminum
Border with Clip-on Opening Provision
to change the Visual, having Back ACP
sheet consist of Digital Printed Poster
on HP Machine having Phillips
Electricalls.
Provision-Wall -Mounted/Hanging

8. Technology-SNAP FIT FRAMES
Matrl Specs.-Providing fabricating
installation and fixing of Aluminum
Border with Clip-on Opening Provision
to change the Visual, having Back ACP
sheet consist of Digital Printed Poster
on HP Machine,covered with 2mm Clear
Acrylic Sheet from Front.
Provision-Wall Mounted/Hanging

9. Technology-Providing fabricating and fixing of
signage's of varying sizes and shapes in PVC
Sheets
material Specs.-03 mm thick PVC sheet at
base with self adhesive colored vinyl with graphic
son top of glow tape complete including fixing on
wall with screws and washers or hanging on
ceiling with GI chain/GI Bar complete as per
technical specifications and directions of
Engineer.
Provision-Wall Mounted/Hanging Suspended

10. Steel Plates
Technology-Stainless Steel Plates
material. Specs -Providing and
fixing of signage's of varying sizes and
shapes using stainless steel sheet of
minimum 16Gthickness brush finish
including engraving/etching of letters
of required size filled with color as
desired by engineer, fixing with S.S.
screws on walls.
Provision-Wall Mounted

11. Technology-Stainless Steel
Plates
material. Specs
-Providing and fixing of
signage's of varying sizes and
shapes using stainless steel
sheet of minimum
16Gthickness brush finish
including engraving/etching
of letters of required size
filled with color as desired
by engineer, fixing with S.S.
screws on walls.
Provision-Wall
Mounted/Table Top

12. Technology-Transparent Name
Plate
Matrl..Specs- Providing
fabricating and fixing of name
plate ockets outside rooms made
of 5mm opaque, milky white
acrylic sheet in various sizes and
with provision of fixing acrylic
plates as per boq-1 on the same,
the pockets should be well crafted
using high quality adhesives and
should be fixed on the wall with
the help of screws etc. and as per
the direction of the engineer.
Provision-Wall Mounted/Table
Top

13. Technology-Lit Vinyl
material. Specs
-Providing and fixing of
signage's of varying sizes
and shapes with Self
adhesive vinyl pasted on
Acrylic Sheet hanging with
S.S Rod.
Provision-Suspended

14. Technology-PROVIDING &
FIXING OF EDGELIT SIGNAGES WITH
BATTERY BACKUP
material Specs. - MADE FROM
ACRYLIC SHEET TO BE OF 8 MM
THICKNESS LASER ENGRAVED,
TRANSFORMER TO BE INBUILT
Maintenance-free sealed nickel
cadmium battery included
• 120V/277V AC Operation
• Crystal clear acrylic face panel
• Engraved letters increase visibility
• Anodized aluminum faceplate
• Field applied chevron directional
indicators simplify installation
• Long life, energy-saving LED lamps
• Dual-voltage 120V/277V AC
Operation
• UL listed
Provision-Hanging Suspended
Edge-lit signage

15. Technology-Modular
Projected Signage
material. Specs –Made
with SAV Pasted on Poly sheet
with border of aluminum
Panel
Provision- Wall Mounted

16.  Tecnology-Transparent
View
 Matrl Specs
-Providing & Fixing Wall Mounted Nonlit
Utility 24" x 9“. Internal sign of approved
make & made of 10mm Acrylic. with the
required text matters stuck on it with
plotted selfadhesive vinyl & Mounted on
3mm Aluminium Composit Panel bracketed
at suitable locations including necessary
fittings & fastening etc. complete &
asdirected by The Engineer in charge
 Provision-Wall Mounted

17. Technology-Hollow Aluminum
Signs
Matrl Specs- .Providing and
fixing of sinages of varying sizes
made of hollow aluminum sections
of 150 mm width.with both hollow
ends caped with suitable
PVC/aluminium cover plates of
required including hanging from
ceiling by two adjustable
suspenders of appropriate dia
made of MS/GI bars ,lettering on
vinyle sheet and pasting on it with
pictogram complete as per
technical specifications and
directions of Engineer..
Provision-Wall
Mounted/Hanging

18. Technology-Curve Signage
material. Specs –Made with
SAV Pasted on Poly sheet with
border of aluminum Panel
Provision- Suspended

19. Technology- Providing and fixing of
signage's, modular curved frame
technology, of various widths and
lengths, to form suggested usages.
material specs-. Made of Aluminum
extruded sections , duly anodized ,all
signage's shall be provided with 0.6-
0.8mm polycarbonate protecting film
over the prints, of appropriate size
and approved make or Equivalent.
Provision-Wall Mounted /Hanging
suspended

20. Technology-Modular Multi Panel Signage
material. Specs –Made by combining
two-side by side Sections & Separate
Header Frame with aluminum Panel
Provision- Wall Mounted

21. Technology-Modular
inserting frame
material. Specs –Made
by composite Panel with Poly
sheet.
Provision- Wall Mounted

22. Technology-Double sided
Backlit Composite Panel
material Specs-Providing.
Fabricating and fixing of ACP DUAL SIDED
TOWER, ALUMINIUM Composite
Plastic Signage's with 3mm ACP Sheet,
Using 1" MS PIPE Frame, with anti Rust
Coating, All 4 Sides with ACP Sheet
(Indobond or equivalent make), Lettering
to be done with raised 25mm Acrylic
letters made from 3mm acrylic sheet and
Vinyl's if Needed Backlit with Philips Slim
Lite Tube light Fittings, Acrylic Letters to
Protrude out and be lit, including
transportation and fixing at Site as per the
Direction of the site Engineer. ALL
ACRYLIC TO BE USED SHOULD BE OF A-
CAST GRADE AND VINYL SHOULD BE OF
3M QUALITY, ELECTRICAL PHILIPS
ELECTRONIC, WITHTIMER FOR AUTO ON &
OFF.
Provision-Fixed Grounded
Pylon Signage

23. Technology-Self Moving Pictures
material Specs-Providing.
Fabricating and fixing of Scrollers of size
6’x 32" with slides up to 6 nos as per the
design provided. The machines is
equipped with 2 synchronized servo
motors with sensors for both side
movement and lighting and glass top
with powder coated body including
transportation and fixing at Site as per
the Direction of the site Engineer.
Provision-Wall mounted/Self Stand
Scrollers

24. Acrylic Non Lit Sandwich Frame
Technology-Sandwich
Posters.
Matrl.Specs-Providing
fabricating , installation and
fixing of poster frame with
digitally printed transparent
film technova sandwitched
between 2-3 mm clear acrylic
sheet fixed on the wall/MS
with the help of suitable steel
studs.
Provision-Wall Mounted

25. Technology-Sandwich
Lit Frame
Material Specs-
Providing, fabricating and
fixing of LED signage's made
from acrylic 2 sheets + LED
strips & power supply in size
of 3’x4’ with the message
print out and stainless steel
studs on the walls including
cost of screws and fixing
complete as per directions of
engineer.
Provision-Wall mounted
Acrylic Lit Sandwich Frame

26. Technology- Premium Film
Material Specs-Providing and
fixing 3M quality frosting film
for glass doors computer cut
in designs approved and
pasted. As per the directions
of engineers.
Provision-Pasted On Glass
Frosted Film
Modular Curved Signage

27. Technology-Frontlit Otdoor
Sign.
Matrl.Specs-Providing,
fabricating and fixing of frontlit
signages with solvent printing on
13 oz Hanwa/LG make flex
printing on Vutek/ Sytec/ Edge
print etc with UV cure inks with
minimum life of 1 year for non
fading, stretched on 25mm sq M.S.
pipe, with 28 gauge tin sheet on
the back for withstanding wind
pressure with adequate lights in
the front. The front lighting to be
Metalite (white light) of 150 watts
and Philips make to be fixed with
metal arms at least 4ft protruding
outside
Provision-Grounded with Pole

28. Technology-Frontlit Otdoor
Sign.
Matrl.Specs-Providing, fabricating
and fixing of frontlit signages with
solvent printing on 13 oz Hanwa/LG
make flex printing on Vutek/ Sytec/
Edge print etc with UV cure inks with
Sunboard Cutout minimum life of 1 year
for non fading, stretched on 25mm sq
M.S. pipe, with 28 gauge tin sheet on the
back for withstanding wind pressure
with adequate lights in the front. The
front lighting to be Metalite (white light)
of 150 watts and Philips make to be fixed
with metal arms at least 4ft protruding
outside
Provision-Grounded with
Pole

30. Technology-Glow in
Complete Darkness
Matrl.Specs-Providing
fabricating installation and
fixing of night vision
sinages visible in complete
darkness computer cut
vinyle pasted on 3mm
acrilic sheet and further
fixed on wall/hanging
from ceiling with the help
of MS/GI rods complete as
per technical
specifications and
directions of engineer.
Provision-Wall
Mounted/Hanging

31. Technology-Self Illuminated
Material-Specs-Providing and
installation of SOLAR ROAD STUDS Self-
Illuminating in dim Areas of during
night time. Solar Rechargeable
batteries for Continual Performance
Without Much Maintained Super bright
LEDs with a viewing Distance of 500-
800 meters. Equipped with Prismatic
reflective lens on each side ensure
maximum reflectivity made up of highly
compressive material, can sustain 10
tonnes. Water Resistant (Aluminum
alloy and Polycarbonate 6 Led with
stem )Self 20 green for entry and 20
Red for exit
Provision-Fixed Grounded
Solar Road Studs

32. Material Specs. Providing
and Installation of CAR
STOPPER Color: Black with
yellow Reflective Strip
Feet With help of fasteners
(2 reflectors on Each
Stopper )
L-500 MM H-100M
B-125 MM Weight-4.8 Kg.
Provision-Grounded
Car Stoppers

33. Material Specs-Providing
and Installation of CORNER
GUARD : A premium range
of high quality corner
Protectors are made from
high impact resistance
natural rubber. These are
designed corner Protectors
are made from high impact
resistance natural rubber
Rubber + reflectors
Provision-Pillar Mounted
Pillar Corner Guard

34. Material Specs-
providing and
installation of CONCAVE
MIRRORS Made Up of
Polycarbonate
Reflective Mirrors ,
Body is made of
ABS/fiber/ Plastic/,
Suitable for
indoor/Outdoor use
with hood, Hardware
80 cms
Provision-Wall
mounted
Concave Mirrors

35. Specs-Providing and installation
of CAT EYE OF 3M QUALITY
Designed to provide Enhanced,
Dependable road Guidance to
motorists , These are Visible From
long Distance. These are installed
With Special hot Melt Bitumen
Adhesive Avoiding Nails ETC.
(ABS Cat's Eye 90x110x17MM,
Conforms ASTM Standards)
Provision-Fix Grounded
CAT EYE

36. For More Detail Pls. Contact At
Pushp India Ltd.
A-4M,Sec-80,
Noida ,Uttar Pradesh-201305
Ph.: 9953743155, 9210908410
Fax: 0120- 4227024/5/6/7/8
Email: info@pushpindia.net
URL: www.pushpindia.net
Contact us…..