Homeautomation
•Download as PPTX, PDF•
1 like•176 views
How to setup automation in your home. Utilizing various wireless communication interfaces like Bluetooth, Zigbee, RF etc. Based upon the requirement we need to use the required one. In some cases like to cover more distance we should not use Zigbee, Bluetooth, RF as they cover only 10metres so we should use another one like WiFi.Home automation is “The Internet of Things"…The way that all of our devices and appliances will be networked together to provide us with a seamless control over all aspects of our home and more. Home automation has been around from many decades in terms of lighting and simple appliance control, and only recently has technology caught up for the idea of the interconnected world, allowing full control of your home from anywhere, to become a reality.
Report
Share
Report
Share
Recommended
Scada monitoring system
This document describes a SCADA-based temperature monitoring system that uses 8 temperature sensors and an AT89S52 microcontroller to monitor temperatures. The microcontroller collects temperature readings from the sensors, converts them to digital with an ADC0808, and sends the values serially to a computer using a MAX32 IC. Software on the computer displays the readings, logs them to a database, and allows setting temperature setpoints. If temperatures exceed limits, the microcontroller controls a relay driver to turn heaters on or off.
Agriculture field monitoring
This document presents a wireless agricultural field monitoring and motor control system designed for illiterate farmers. The proposed system uses wireless sensor networks to monitor various agriculture parameters and control them if any thresholds are crossed. Sensor nodes equipped with sensors such as temperature, light, and water sensors send data to a monitoring node via Zigbee. The monitoring node then sends messages to the farmer's mobile if any thresholds are exceeded, allowing remote monitoring and control of agriculture fields from the farmer's home. The system aims to help farmers with limited distance monitoring and control capabilities using low-power wireless technology.
Substation monitoring system for maintaining a data log.ppt
This document describes a project to monitor parameters like voltage, frequency, and power input/output of a 33/11kV substation. A microcontroller continuously monitors these values and displays them on an LCD screen. It can send phone messages if parameters exceed limits and automatically trip the system if voltage exceeds a specific limit. The system includes components like transformers, rectifiers, filters, and relays. Its advantages include remote monitoring to avoid power losses and repairs, while disadvantages include complexity and cost. The system could later be expanded to use GPRS and monitor additional parameters like energy usage.
Monitoring & Controlling of Devices using GSM
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a microcontroller to receive SMS commands from a mobile phone via a GSM modem and control devices connected to relays. It allows devices like fans and lamps to be turned on and off from a distance. The system provides advantages like remote control from anywhere using basic phone operation and potential applications in home, office, and industrial automation.
BMS Automation wiring
The document discusses different types of wiring used in building management systems, including control wiring, power wiring, and communication wiring. It provides details on wire types for various applications, such as CAT5 or CAT6 cable for communication between DDC controllers. Diagrams show typical system architectures and wiring schematics for HVAC components like VAV boxes and precision air conditioners connected over a BACnet network through a gateway.
SRS-PDR-CDR_Rev_1_3
The project aims to create a satellite receiver system to obtain images from NOAA weather satellites. The goals are for the system to be self-sustaining, remotely controlled, and able to receive NOAA APT images. The key components include an antenna, low-noise amplifier (LNA), software-defined radio (RTL-SDR), microcontroller, power system, and cooling system. Team members will work on different subsystems - the antenna, LNA, microcontroller, and power system. A schedule is outlined with milestones for the antenna, LNA, and power system designs. Risks include component failures, delays, and cost overruns. Contingency plans will be made to mitigate these risks.
Substation monitoring1
This document describes a project to monitor electrical parameters like voltage, current, and temperature of a distribution transformer in a substation using a microcontroller and Zigbee communication. Sensors measure the parameters which are sent over Zigbee to a receiving unit that displays the readings and can shut down the transformer if thresholds are exceeded, protecting it from overloads or high heat. The system aims to remotely monitor and control substations safely and efficiently.
A low cost short range wireless embedded system for multiple parameter control
Abstract It is well established fact that the process atomization offers the advantages like high accuracy, power saving, manpower saving, reduction in wastage, high & efficient production volumes. In the modern industries precise monitoring, & controlling of temperatures & fluid level of various chemicals in storage tanks at various places is an essential requirement. This paper describes the development of Wireless Embedded System by using Atmel’s 89C51 microcontroller for monitoring & control of process parameters from remote site .The system utilizes ASK transmitter & receiver for transmission and reception of reference values i.e., temperature and fluid levels from transmitter to receiver. Interaction with transmitter is done through matrix keypad. A TRIAC AC power controller circuit is used in the receiver which controls the flow of power to the heater. The fluid level is maintained by a water feed pump .User friendly Software is developed using 8051’s Assembly language to control the transmitter and receiver units. Keywords: ASK/RF transceiver, Temperature sensor, Triac, Fluid level sensor and Microcontroller etc…
Recommended
Scada monitoring system
This document describes a SCADA-based temperature monitoring system that uses 8 temperature sensors and an AT89S52 microcontroller to monitor temperatures. The microcontroller collects temperature readings from the sensors, converts them to digital with an ADC0808, and sends the values serially to a computer using a MAX32 IC. Software on the computer displays the readings, logs them to a database, and allows setting temperature setpoints. If temperatures exceed limits, the microcontroller controls a relay driver to turn heaters on or off.
Agriculture field monitoring
This document presents a wireless agricultural field monitoring and motor control system designed for illiterate farmers. The proposed system uses wireless sensor networks to monitor various agriculture parameters and control them if any thresholds are crossed. Sensor nodes equipped with sensors such as temperature, light, and water sensors send data to a monitoring node via Zigbee. The monitoring node then sends messages to the farmer's mobile if any thresholds are exceeded, allowing remote monitoring and control of agriculture fields from the farmer's home. The system aims to help farmers with limited distance monitoring and control capabilities using low-power wireless technology.
Substation monitoring system for maintaining a data log.ppt
This document describes a project to monitor parameters like voltage, frequency, and power input/output of a 33/11kV substation. A microcontroller continuously monitors these values and displays them on an LCD screen. It can send phone messages if parameters exceed limits and automatically trip the system if voltage exceeds a specific limit. The system includes components like transformers, rectifiers, filters, and relays. Its advantages include remote monitoring to avoid power losses and repairs, while disadvantages include complexity and cost. The system could later be expanded to use GPRS and monitor additional parameters like energy usage.
Monitoring & Controlling of Devices using GSM
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a microcontroller to receive SMS commands from a mobile phone via a GSM modem and control devices connected to relays. It allows devices like fans and lamps to be turned on and off from a distance. The system provides advantages like remote control from anywhere using basic phone operation and potential applications in home, office, and industrial automation.
BMS Automation wiring
The document discusses different types of wiring used in building management systems, including control wiring, power wiring, and communication wiring. It provides details on wire types for various applications, such as CAT5 or CAT6 cable for communication between DDC controllers. Diagrams show typical system architectures and wiring schematics for HVAC components like VAV boxes and precision air conditioners connected over a BACnet network through a gateway.
SRS-PDR-CDR_Rev_1_3
The project aims to create a satellite receiver system to obtain images from NOAA weather satellites. The goals are for the system to be self-sustaining, remotely controlled, and able to receive NOAA APT images. The key components include an antenna, low-noise amplifier (LNA), software-defined radio (RTL-SDR), microcontroller, power system, and cooling system. Team members will work on different subsystems - the antenna, LNA, microcontroller, and power system. A schedule is outlined with milestones for the antenna, LNA, and power system designs. Risks include component failures, delays, and cost overruns. Contingency plans will be made to mitigate these risks.
Substation monitoring1
This document describes a project to monitor electrical parameters like voltage, current, and temperature of a distribution transformer in a substation using a microcontroller and Zigbee communication. Sensors measure the parameters which are sent over Zigbee to a receiving unit that displays the readings and can shut down the transformer if thresholds are exceeded, protecting it from overloads or high heat. The system aims to remotely monitor and control substations safely and efficiently.
A low cost short range wireless embedded system for multiple parameter control
Abstract It is well established fact that the process atomization offers the advantages like high accuracy, power saving, manpower saving, reduction in wastage, high & efficient production volumes. In the modern industries precise monitoring, & controlling of temperatures & fluid level of various chemicals in storage tanks at various places is an essential requirement. This paper describes the development of Wireless Embedded System by using Atmel’s 89C51 microcontroller for monitoring & control of process parameters from remote site .The system utilizes ASK transmitter & receiver for transmission and reception of reference values i.e., temperature and fluid levels from transmitter to receiver. Interaction with transmitter is done through matrix keypad. A TRIAC AC power controller circuit is used in the receiver which controls the flow of power to the heater. The fluid level is maintained by a water feed pump .User friendly Software is developed using 8051’s Assembly language to control the transmitter and receiver units. Keywords: ASK/RF transceiver, Temperature sensor, Triac, Fluid level sensor and Microcontroller etc…
A low cost short range wireless embedded system for multiple parameter control
1. The document describes a low-cost wireless embedded system for monitoring and controlling multiple parameters like temperature and fluid level from a remote site.
2. The system uses a microcontroller, RF transmitter and receiver, sensors and actuators to monitor and control the temperature of a heater and fluid level in a tank.
3. Experimental results show the system can accurately control the temperature and fluid level based on setpoint values by adjusting the power to the heater and a pump motor.
Kalyan abstrct googl
This document describes a project to control electrical appliances in a home remotely using a microcontroller and PC. A microcontroller like the AT89S52 is used to interface with devices via relays and receive commands from a PC through an RS-232 serial connection. The MAX232 chip converts signals between the RS-232 and microcontroller levels. Based on commands from the PC, the microcontroller can turn appliances on and off and send back status updates. This allows remote control and monitoring of devices for applications like smart homes and industrial automation.
Wireless lighting managemnt system
This includes introduction to wireless lighting management, luminaire controller, sensors, switches and other devices, servers and gateways and how wireless lighting system works
Gsm based garbage disposal
Our project “GSM based Garbage Disposal” is mainly intended to control the ON/OFF operations of the irrigation motor by using a mobile phone. The mobile phone present in the system uses auto answer function to lift the call. Each key in the mobile phone transmits two tones with different frequencies when pressed. These transmitted frequencies are decoded using DTMF decoder and the decoded value is fed as input to micro controller which in turn operates switches like Relay and Triac to which the irrigation motor is connected. The input value to the micro controller will be checked and respective operation of that key will be performed like switching ON/OFF the irrigation motor. The system also gives feed back through buzzer alarm system.
Digital Catapult Centre Brighton - Nigel Devenish
At The Digital Catapult Centre Brighton event, Tech Beyond The Screen: Connectivity & Infrastructure on Wednesday 2nd March, Nigel Devenish talked about his work with Trak365.
home appliance control using gsm
This document describes a student project to create a remote home appliance control system using a microcontroller, GSM modem, and SMS messages. The system allows users to control devices like lights and fans from anywhere via a mobile phone. It aims to provide a low-cost alternative to existing wireless home automation technologies. The document outlines the project objectives, hardware components, software, applications, advantages, and conclusions.
cellphone based control of electrical equipment
This document describes a DTMF (Dual Tone Multi-Frequency) based remote control system using a mobile phone. It consists of a DTMF decoder, microcontroller, relays, and appliances. The system allows controlling up to 4 appliances by pressing number keys on the mobile phone. When a key is pressed, the DTMF decoder converts the tones to digital signals for the microcontroller. The microcontroller then activates the corresponding relay to turn the appliance on or off. The system offers remote control of appliances with advantages of quick response, easy operation, and low cost.
Home automation using dtmf decoder
The document discusses a home automation system that uses DTMF decoding to control electrical appliances via a cellular phone. The system allows a user to call in and enter a 2-3 digit password to remotely turn devices on or off using relays. This provides remote control of appliances like alarms from anywhere for security while avoiding wastage of electricity. The system has low cost compared to other technologies like GSM-based control.
DTMF based Home Applicance System
This document describes a DTMF-based home appliance control system that allows wireless control of devices in a home using a user console with numbered keys. The system uses a DTMF decoder, microcontroller, and wireless transmitter and receiver to encode and transmit user selections via DTMF signals and control appliances accordingly. Key components include an AT89S52 microcontroller, MT8870 DTMF decoder, relays, LEDs, buttons, and other basic electronic components. When a key is pressed, the DTMF signal is encoded and transmitted to the receiver, then decoded by the microcontroller to trigger the correct appliance, allowing remote control of devices like lights and appliances from anywhere.
Dtmf based appliances control system for rural and agricultural applications
This document describes a DTMF-based system for remotely controlling appliances in rural and agricultural applications using a mobile phone. The system uses a DTMF decoder, microcontroller, and relays to operate devices when DTMF tones from a phone are received. It allows controlling electrical devices like bulbs and motors from anywhere through phone. The system has applications in industries and homes to control devices without being physically present. It saves electricity and provides wireless control, though it cannot display status and anyone knowing the number can access appliances. The project can be enhanced with high voltage control and remote monitoring with a camera.
Substation Automation
The document discusses substation automation, including its basic functions, levels (station and bay), equipment, communication protocols, and advantages. It describes the station computer, GPS receiver, bay control units, protection relays, communication facilities using Ethernet switches, and remote monitoring capabilities. The document also outlines open system architecture following IEC 61850 standards, advanced functions like power quality monitoring, and future integration opportunities. Drawbacks are listed related to legacy systems, skills, expertise, funding, and management philosophy.
Eaton ats automatic transfer switch ats pwr
The Eaton Automatic Transfer Switch (ATS-PWR) monitors mains power for abnormalities and automatically starts a generator to provide backup power if issues are detected. It then switches the load to the generator. When mains power is restored, it returns the load to mains and stops the generator. The ATS-PWR offers benefits like remote monitoring, history logging for troubleshooting, and configurable transfer settings. It can be used for standby generator applications to provide backup power in the event of a mains failure.
DTMF base Mobile controlled appliances control
This document describes a circuit that allows controlling electrical appliances via a mobile phone using DTMF tones. The circuit uses a DTMF decoder IC to decode the tones from the phone's microphone into digital outputs. These outputs control a relay circuit that can power appliances. When a key is pressed on the phone, the DTMF IC detects the tone and triggers a flip-flop that energizes the relay and the appliance. This allows remote control of devices from a phone without needing an internet connection.
Power system automation introduction
Power system automation involves using instrumentation and control devices to automatically control the power system. It includes substation automation which uses data from intelligent electronic devices to control power system devices from remote locations. Substations transform voltage levels and may be owned by utilities or large industrial customers. Power system automation incorporates tasks like data acquisition, supervision of system conditions, and control of devices.
Monitoring and data logging system for a generator
This document describes the design of a monitoring and data logging system for a generator. The system includes speed control, voltage control, and data logging capabilities. Sensors measure current, voltage, temperature, frequency, and RPM to control speed and voltage. The microcontroller interfaces with an ADC to read sensor values and control parameters. Data is logged and can be uploaded to a web page. The system provides automatic and manual operation as well as protection functions.
Controlers for industrial process and OEM manufacturers
This document provides an introduction to different types of industrial automation controllers, including counters, timers, power controllers, data recorders, programmable logic controllers (PLCs), frequency converters, and softstarters. It describes the basic functions of each type of controller, such as counters storing event counts, timers measuring time intervals, power controllers regulating voltage levels, and data recorders logging process data over time. PLCs are defined as digital computers used to automate industrial processes. Frequency converters can change voltage levels and control motor speed and torque, while softstarters reduce electrical surge during equipment startup. Contact details are provided for VISUM Ltd, an industrial automation company located in Kosice, Slovakia.
RUGGEDCOM RMC30 serial device server
The RMC30 is a utility-grade, 2-port Serial-to-Ethernet server that has been specifically designed to operate in electrically harsh and climatically demanding environments.
Blutooth based home appiliance
This document presents a home automation project involving Bluetooth control of appliances. A circuit diagram shows a microcontroller connected to relays, a Bluetooth module, and a lamp. The microcontroller code is programmed using Kiel software and burned to the chip. When paired with an Android device via Bluetooth, appliances can be switched on or off remotely by sending data. Potential applications discussed include lighting control, HVAC control, security cameras, and presence simulation for vacant homes. Biometrics and touchscreen security systems are also mentioned as parts of home automation.
SCADA a complete overview
The document discusses Supervisory Control and Data Acquisition (SCADA) systems. SCADA is an industrial control system that monitors and controls physical processes across multiple sites from a central location. It includes components like field sensors and instruments, remote terminal units (RTUs) that interface with physical devices, communication networks to transfer data between sites, and a central monitoring station. SCADA systems are used in applications like water treatment, traffic signals, and process control to remotely collect data, control processes from a distance, generate logs and reports, and send real-time information to operators. The document outlines different SCADA architectures including monolithic, distributed, and networked systems and compares SCADA to distributed control systems (DCS).
GSM Based Fault Monitoring System (Project)
This is a modern technique of Monitoring of switchyard which is used in many other countries.
It will be useful for reducing requirement of manpower.
When a fault occurred a SMS will be sent to the registered mobile number detailing about type of fault and location of fault.
seminar.pptx
This document describes a wireless communication system to remotely monitor and control equipment using a GSM network. It consists of a transmitter and receiver connected by a GSM modem. The transmitter is a mobile phone that sends SMS codes to control relays and devices. The receiver includes a microcontroller, GSM modem, relays, and devices. It receives SMS codes and uses the microcontroller to operate the relays and control devices like fans and lamps. The system allows remote monitoring and control of devices from anywhere through simple SMS commands. It has applications in home, office, and industrial automation.
Home appliance control system (2)
This document describes a home appliance control system that allows users to remotely control and monitor appliances like lights, AC, TV, etc. from a mobile phone or PC. It uses an MSP430 microcontroller, light dependent resistor, thermistor and other hardware. Energia IDE is used for software development. The system aims to provide control of appliances from anywhere for added safety and convenience while reducing energy consumption through automated control.
More Related Content
What's hot
A low cost short range wireless embedded system for multiple parameter control
1. The document describes a low-cost wireless embedded system for monitoring and controlling multiple parameters like temperature and fluid level from a remote site.
2. The system uses a microcontroller, RF transmitter and receiver, sensors and actuators to monitor and control the temperature of a heater and fluid level in a tank.
3. Experimental results show the system can accurately control the temperature and fluid level based on setpoint values by adjusting the power to the heater and a pump motor.
Kalyan abstrct googl
This document describes a project to control electrical appliances in a home remotely using a microcontroller and PC. A microcontroller like the AT89S52 is used to interface with devices via relays and receive commands from a PC through an RS-232 serial connection. The MAX232 chip converts signals between the RS-232 and microcontroller levels. Based on commands from the PC, the microcontroller can turn appliances on and off and send back status updates. This allows remote control and monitoring of devices for applications like smart homes and industrial automation.
Wireless lighting managemnt system
This includes introduction to wireless lighting management, luminaire controller, sensors, switches and other devices, servers and gateways and how wireless lighting system works
Gsm based garbage disposal
Our project “GSM based Garbage Disposal” is mainly intended to control the ON/OFF operations of the irrigation motor by using a mobile phone. The mobile phone present in the system uses auto answer function to lift the call. Each key in the mobile phone transmits two tones with different frequencies when pressed. These transmitted frequencies are decoded using DTMF decoder and the decoded value is fed as input to micro controller which in turn operates switches like Relay and Triac to which the irrigation motor is connected. The input value to the micro controller will be checked and respective operation of that key will be performed like switching ON/OFF the irrigation motor. The system also gives feed back through buzzer alarm system.
Digital Catapult Centre Brighton - Nigel Devenish
At The Digital Catapult Centre Brighton event, Tech Beyond The Screen: Connectivity & Infrastructure on Wednesday 2nd March, Nigel Devenish talked about his work with Trak365.
home appliance control using gsm
This document describes a student project to create a remote home appliance control system using a microcontroller, GSM modem, and SMS messages. The system allows users to control devices like lights and fans from anywhere via a mobile phone. It aims to provide a low-cost alternative to existing wireless home automation technologies. The document outlines the project objectives, hardware components, software, applications, advantages, and conclusions.
cellphone based control of electrical equipment
This document describes a DTMF (Dual Tone Multi-Frequency) based remote control system using a mobile phone. It consists of a DTMF decoder, microcontroller, relays, and appliances. The system allows controlling up to 4 appliances by pressing number keys on the mobile phone. When a key is pressed, the DTMF decoder converts the tones to digital signals for the microcontroller. The microcontroller then activates the corresponding relay to turn the appliance on or off. The system offers remote control of appliances with advantages of quick response, easy operation, and low cost.
Home automation using dtmf decoder
The document discusses a home automation system that uses DTMF decoding to control electrical appliances via a cellular phone. The system allows a user to call in and enter a 2-3 digit password to remotely turn devices on or off using relays. This provides remote control of appliances like alarms from anywhere for security while avoiding wastage of electricity. The system has low cost compared to other technologies like GSM-based control.
DTMF based Home Applicance System
This document describes a DTMF-based home appliance control system that allows wireless control of devices in a home using a user console with numbered keys. The system uses a DTMF decoder, microcontroller, and wireless transmitter and receiver to encode and transmit user selections via DTMF signals and control appliances accordingly. Key components include an AT89S52 microcontroller, MT8870 DTMF decoder, relays, LEDs, buttons, and other basic electronic components. When a key is pressed, the DTMF signal is encoded and transmitted to the receiver, then decoded by the microcontroller to trigger the correct appliance, allowing remote control of devices like lights and appliances from anywhere.
Dtmf based appliances control system for rural and agricultural applications
This document describes a DTMF-based system for remotely controlling appliances in rural and agricultural applications using a mobile phone. The system uses a DTMF decoder, microcontroller, and relays to operate devices when DTMF tones from a phone are received. It allows controlling electrical devices like bulbs and motors from anywhere through phone. The system has applications in industries and homes to control devices without being physically present. It saves electricity and provides wireless control, though it cannot display status and anyone knowing the number can access appliances. The project can be enhanced with high voltage control and remote monitoring with a camera.
Substation Automation
The document discusses substation automation, including its basic functions, levels (station and bay), equipment, communication protocols, and advantages. It describes the station computer, GPS receiver, bay control units, protection relays, communication facilities using Ethernet switches, and remote monitoring capabilities. The document also outlines open system architecture following IEC 61850 standards, advanced functions like power quality monitoring, and future integration opportunities. Drawbacks are listed related to legacy systems, skills, expertise, funding, and management philosophy.
Eaton ats automatic transfer switch ats pwr
The Eaton Automatic Transfer Switch (ATS-PWR) monitors mains power for abnormalities and automatically starts a generator to provide backup power if issues are detected. It then switches the load to the generator. When mains power is restored, it returns the load to mains and stops the generator. The ATS-PWR offers benefits like remote monitoring, history logging for troubleshooting, and configurable transfer settings. It can be used for standby generator applications to provide backup power in the event of a mains failure.
DTMF base Mobile controlled appliances control
This document describes a circuit that allows controlling electrical appliances via a mobile phone using DTMF tones. The circuit uses a DTMF decoder IC to decode the tones from the phone's microphone into digital outputs. These outputs control a relay circuit that can power appliances. When a key is pressed on the phone, the DTMF IC detects the tone and triggers a flip-flop that energizes the relay and the appliance. This allows remote control of devices from a phone without needing an internet connection.
Power system automation introduction
Power system automation involves using instrumentation and control devices to automatically control the power system. It includes substation automation which uses data from intelligent electronic devices to control power system devices from remote locations. Substations transform voltage levels and may be owned by utilities or large industrial customers. Power system automation incorporates tasks like data acquisition, supervision of system conditions, and control of devices.
Monitoring and data logging system for a generator
This document describes the design of a monitoring and data logging system for a generator. The system includes speed control, voltage control, and data logging capabilities. Sensors measure current, voltage, temperature, frequency, and RPM to control speed and voltage. The microcontroller interfaces with an ADC to read sensor values and control parameters. Data is logged and can be uploaded to a web page. The system provides automatic and manual operation as well as protection functions.
Controlers for industrial process and OEM manufacturers
This document provides an introduction to different types of industrial automation controllers, including counters, timers, power controllers, data recorders, programmable logic controllers (PLCs), frequency converters, and softstarters. It describes the basic functions of each type of controller, such as counters storing event counts, timers measuring time intervals, power controllers regulating voltage levels, and data recorders logging process data over time. PLCs are defined as digital computers used to automate industrial processes. Frequency converters can change voltage levels and control motor speed and torque, while softstarters reduce electrical surge during equipment startup. Contact details are provided for VISUM Ltd, an industrial automation company located in Kosice, Slovakia.
RUGGEDCOM RMC30 serial device server
The RMC30 is a utility-grade, 2-port Serial-to-Ethernet server that has been specifically designed to operate in electrically harsh and climatically demanding environments.
Blutooth based home appiliance
This document presents a home automation project involving Bluetooth control of appliances. A circuit diagram shows a microcontroller connected to relays, a Bluetooth module, and a lamp. The microcontroller code is programmed using Kiel software and burned to the chip. When paired with an Android device via Bluetooth, appliances can be switched on or off remotely by sending data. Potential applications discussed include lighting control, HVAC control, security cameras, and presence simulation for vacant homes. Biometrics and touchscreen security systems are also mentioned as parts of home automation.
SCADA a complete overview
The document discusses Supervisory Control and Data Acquisition (SCADA) systems. SCADA is an industrial control system that monitors and controls physical processes across multiple sites from a central location. It includes components like field sensors and instruments, remote terminal units (RTUs) that interface with physical devices, communication networks to transfer data between sites, and a central monitoring station. SCADA systems are used in applications like water treatment, traffic signals, and process control to remotely collect data, control processes from a distance, generate logs and reports, and send real-time information to operators. The document outlines different SCADA architectures including monolithic, distributed, and networked systems and compares SCADA to distributed control systems (DCS).
GSM Based Fault Monitoring System (Project)
This is a modern technique of Monitoring of switchyard which is used in many other countries.
It will be useful for reducing requirement of manpower.
When a fault occurred a SMS will be sent to the registered mobile number detailing about type of fault and location of fault.
What's hot (20)
A low cost short range wireless embedded system for multiple parameter control
A low cost short range wireless embedded system for multiple parameter control
Dtmf based appliances control system for rural and agricultural applications
Dtmf based appliances control system for rural and agricultural applications
Monitoring and data logging system for a generator
Monitoring and data logging system for a generator
Controlers for industrial process and OEM manufacturers
Controlers for industrial process and OEM manufacturers
Similar to Homeautomation
seminar.pptx
This document describes a wireless communication system to remotely monitor and control equipment using a GSM network. It consists of a transmitter and receiver connected by a GSM modem. The transmitter is a mobile phone that sends SMS codes to control relays and devices. The receiver includes a microcontroller, GSM modem, relays, and devices. It receives SMS codes and uses the microcontroller to operate the relays and control devices like fans and lamps. The system allows remote monitoring and control of devices from anywhere through simple SMS commands. It has applications in home, office, and industrial automation.
Home appliance control system (2)
This document describes a home appliance control system that allows users to remotely control and monitor appliances like lights, AC, TV, etc. from a mobile phone or PC. It uses an MSP430 microcontroller, light dependent resistor, thermistor and other hardware. Energia IDE is used for software development. The system aims to provide control of appliances from anywhere for added safety and convenience while reducing energy consumption through automated control.
20BEE042 5th semester Internship PPT.pptx
This document discusses the components and applications of a SCADA system for electrical power distribution. It describes the key elements of a SCADA system including remote terminal units (RTUs), communication infrastructure, and a supervisory computer system. The document outlines how SCADA is used to monitor parameters like voltage and current in substations and transmit this data to control centers to maintain grid stability and reliability. SCADA systems are critical for functions like load flow analysis, outage management, and energy auditing in electrical distribution networks.
BEMS
Building Energy Management Solutions.
It focuses on effective utilization of electric energy through modern techniques and reduce the amount of wastage of electricity.
Control and Management of Energy, we can see through energy analysis.
With the advent of smart grid these BEMS can help business better manage their electricity demand.
Eprojectprojectfinalreportgsmmonitoringcontrollingofdevicesusinggsm 090811012...
This document describes a system to remotely monitor and control devices using GSM technology. The system uses a GSM transmitter and receiver along with a microcontroller. Users can send SMS messages to turn devices on or off, check statuses, and receive notifications. The system provides advantages like remote monitoring and control. Potential applications include home, office, and industrial automation as well as agricultural equipment control and security systems.
Powerlink® G3 Lighting Control Systems
The document describes the Square D Powerlink G3 lighting control system. It features remotely operated circuit breakers in lighting panelboards that automatically switch lights off during unoccupied periods to reduce energy costs. The system requires no additional installation costs beyond mounting a standard lighting panelboard. It simplifies design and is fully code compliant.
Raritan BCM Data Sheet
This document summarizes Raritan's Branch Circuit Monitoring system, which allows monitoring of electrical capacity and power usage on branch circuits and mains in electrical panels and busways. The modular system provides real-time data on power and environmental conditions to help prevent downtime. It integrates with Power IQ and other DCIM/BMS solutions and offers benefits like reduced energy costs and easier capacity management.
Zigbee based trolley cart access system using rfid
This document describes a Zigbee-based trolley cart access system using RFID for shopping. The system aims to improve shopping speed using RFID technology. It allows registered users to shop and pay using an RFID card without stopping at the counter. Non-registered users pay cash at the counter. The system uses an AT89S52 microcontroller, RFID reader, motor, relay, LCD, RFID tags, buzzer, and power supply. It transmits data via Zigbee and generates automatic bills when customers pass through the RFID antenna area. The system reduces scanning time, allows personalization, and maintains purchase histories for offers and discounts.
157154250-Electric-Powerline-Networking-in-Smart-Home.ppt
Powerline networking uses a home's existing electrical wiring to transmit data around the home or office, providing a cost-effective way to network devices without additional wiring. Various powerline technologies have been developed that differ in transmission methods and speeds, including Intellon CEBus, Echelon LONWorks, X-10, Intelogis Plug-In, and Adaptive Networks. Powerline networking has advantages like low cost and easy installation but also has disadvantages like varying performance based on power usage and older wiring. Current applications include smart home functions and popular powerline devices are from Netgear and Cornex.
unit-iv-wireless-sensor-networks-wsns-and-mac-protocols
Single node architecture: hardware and software components of a sensor node - WSN
Network architecture: typical network architectures-data relaying and aggregation strategies -
MAC layer protocols: self-organizing, Hybrid TDMA/FDMA and CSMA based MAC- IEEE
802.15.4
Automatic meter reading
Now in day to day life we have seen that every thing is in digitilized form so this this presentation is ol about the evolution of meter into automatic meter with many technologies.
Its quiet intresting topic and very vast topic too.
AUTOMATIC METER READING SYSTEMS
This document describes automatic meter reading (AMR) systems. It discusses the evolution of metering systems from electro-mechanical to current digital solid state to next generation smart meters. It outlines the primary components of an AMR system including meter interface modules, communication systems, and central office equipment. Common communication systems are GSM-based and power line carrier communication. The document lists benefits of AMR systems for electric companies like accurate network information and customers like precise consumption data and faster outage recovery.
final ppt.ppt
This document outlines a proposed smart home system with energy consumption monitoring and flood alert security features. It begins with an abstract describing how smart home systems can provide security and access control while allowing remote monitoring. The document then reviews the existing GSM-based system and its disadvantages before proposing a new WiFi-based system using sensors to detect intrusions and monitor things like temperature, gas leaks, water levels and energy usage. It provides block diagrams of the system components and interfaces. The proposed system is said to allow remote control of home appliances via mobile while minimizing energy use and costs.
Smart Metering - Power Management & Power Line Communications
Discussion on the various aspects of Smart Metering technology and its role in sustainability of resources.
SCADA Implementation Based on wireless RF Technology
This document discusses the design of a SCADA system to remotely monitor electrical parameters like voltage, current, power, and power factor at power stations during power transmission. The system uses potential transformers to measure the parameters, which are sent to a microcontroller. If the parameters exceed predefined values, a relay will operate to isolate the circuit and protect it. The status of the relay is transmitted to remote power stations using radio frequency technology. The system aims to increase efficiency, minimize faults, and maximize profitability during power transmission.
Smart metering infrastructure Architecture and analytics
Smart metering infrastructure Architecture and analyticsSandeep Sharma IIMK Smart City,IoT,Bigdata,Cloud,BI,DW
advanced metering infrastructure, advanced meter reading, internet of Things, WiMax, LTE, smart meter analytics, smart meter communication technologies, LTE advanced, WiFi, smart meter architectural blueprint
More details: (blog: http://sandyclassic.wordpress.com ,
linkedin: ie.linkedin.com/in/sandepsharma/)Sms based pumpset_control
This document describes an SMS-based system to remotely control and monitor a pump set using a GSM modem. The system uses a microcontroller that receives SMS commands from a mobile phone via a GSM modem to operate relays and control the pump set. It allows users to turn the pump on/off or set timers for operation through simple text messages. The system is designed for applications like remote irrigation and facility monitoring to save time and labor over manual control.
Building management system
The system behind how multiple networks from different platforms are associated in a building or in a firm
Power theft detection via plc
The document discusses using programmable logic controllers (PLCs) installed with power meters to minimize power theft. PLCs connected to power meters via an optical fiber network can remotely monitor and control power usage. If payments are delinquent, power companies can stop supply from the networked meters. Installing PLC-enabled meters high on poles separates the measurement and display functions, preventing tampering while still allowing users to check usage.
S home
1) The document discusses performance evaluation of wireless sensor networks using Zigbee technology for smart home applications.
2) It describes how Zigbee can be used to control home appliances and manage energy usage in smart homes through a home area network that collects sensor data.
3) The document outlines the Zigbee protocol stack and advantages of using Zigbee wireless technology for creating a smart home solution.
Similar to Homeautomation (20)
Eprojectprojectfinalreportgsmmonitoringcontrollingofdevicesusinggsm 090811012...
Eprojectprojectfinalreportgsmmonitoringcontrollingofdevicesusinggsm 090811012...
Zigbee based trolley cart access system using rfid
Zigbee based trolley cart access system using rfid
157154250-Electric-Powerline-Networking-in-Smart-Home.ppt
157154250-Electric-Powerline-Networking-in-Smart-Home.ppt
unit-iv-wireless-sensor-networks-wsns-and-mac-protocols
unit-iv-wireless-sensor-networks-wsns-and-mac-protocols
Smart Metering - Power Management & Power Line Communications
Smart Metering - Power Management & Power Line Communications
SCADA Implementation Based on wireless RF Technology
SCADA Implementation Based on wireless RF Technology
Smart metering infrastructure Architecture and analytics
Smart metering infrastructure Architecture and analytics
Recently uploaded
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing
EV Charging at Multifamily Properties by Kevin Donnelly
Kevin Donnelly gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Catalytic Converter theft prevention - NYC.pptx
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
原版制作(Exeter毕业证书)埃克塞特大学毕业证完成信一模一样
学校原件一模一样【微信：741003700 】《(Exeter毕业证书)埃克塞特大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker Jamieson
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
一比一原版(WashU文凭证书)圣路易斯华盛顿大学毕业证如何办理
一模一样【微信：176555708】【(WashU文凭证书)圣路易斯华盛顿大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Here's Why Every Semi-Truck Should Have ELDs
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
一比一原版(Columbia文凭证书)哥伦比亚大学毕业证如何办理
一模一样【微信：176555708】【(Columbia文凭证书)哥伦比亚大学毕业证成绩单Offer】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
快速办理(napier毕业证书)英国龙比亚大学毕业证在读证明一模一样
学校原件一模一样【微信：741003700 】《(napier毕业证书)英国龙比亚大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
AadiShakti Projects ( Asp Cranes ) Raipur
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What do the symbols on vehicle dashboard mean?
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Recently uploaded (17)
Globalfleet - global fleet survey 2021 full results
Globalfleet - global fleet survey 2021 full results
Hand Gesture Control Robotic Arm using image processing.pptx
Hand Gesture Control Robotic Arm using image processing.pptx
EV Charging at Multifamily Properties by Kevin Donnelly
EV Charging at Multifamily Properties by Kevin Donnelly
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
Expanding Access to Affordable At-Home EV Charging by Vanessa Warheit
EV Charging at MFH Properties by Whitaker Jamieson
EV Charging at MFH Properties by Whitaker Jamieson
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill Roads
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
53286592-Global-Entrepreneurship-and-the-Successful-Growth-Strategies-of-Earl...
Homeautomation
- 2. CONTENTS ● SCOPE ● FUNCTIONING ● BENEFITS ● SECTORS ● DRAWBACKS ● ENERGY BALANCE
- 3. SCOPE ● Home Automation is the integration of technology and services through home networking for a better quality of living ● Computer based system that monitors a range of building services
- 4. FUNCTIONING ● Power line Carrier Systems (PCS) is a technology which is used to send coded signals along a home's existing electric wiring to programmable switches, or outlets. ● These signals convey commands that correspond to "addresses" or locations of specific devices, and that control how and when those devices operate.
- 6. THE WLAN SYSTEM DESIGN •Consist of design two boards, RF remote control, WLAN and sensors. •These two boards are connecting to the desktop Home PC through one serial port .
- 7. RF REMOTE CONTROL •The RF remote control system is using 433MHz, which is a frequency allocated for all sort of radio frequency controller. •The microcontroller receive this signal through RF receiver circuit then provide the special code of the selective device.
- 9. BENEFITS ● Energy analysis, management and control information ● Smart homes could notify the resident when it was time to take medicine, alert the hospital if the resident fell. ● Amount of wasted energy is minimised
- 10. SECTORS ● Health care, retail, manufacturing , ● Educational institutions. ● Commercial/residential purposes.
- 11. DRAWBACKS ● Mild radiation, functioning stuck. ● High initial cost but not more than automated control ● Hackable at limited situations
- 12. ENERGY BALANCE ● Saving energy means creating energy ● With the advent of smart grid these BEMS can help business better manage their electricity demand.
- 13. SIGNAL PROCESSING ● ZigBee, Z-Wave, X 10 and Insteon just provide the technology for smart home communication. Manufacturers have made alliances with these systems to create the products that use the technology.
- 14. THANK YOU