Varied of 10 Years of Experience with various Projects in the field of Oil & Gas, Petrochemicals Refinery in Mechanical Construction(on-plot & off-plot), High sour facility construction, Fabrication, Erection, In-Service Inspection & shutdown Inspection carried out inspection of high pressure Piping, Pipeline laying , valves, Pressure Vessel, Storage Tanks, Heat Exchanger, Boiler, Column, Heater & structural as a QA/QC Engineer, QA/QC Multi discipline Inspector, Mechanical Inspector, Sr. Inspection Engineer, piping/pipeline Inspector, Welding Inspector, Plant Inspector & Field Inspector(vendor inspection).
Varied of 10 Years of Experience with various Projects in the field of Oil & Gas, Petrochemicals Refinery in Mechanical Construction(on-plot & off-plot), High sour facility construction, Fabrication, Erection, In-Service Inspection & shutdown Inspection carried out inspection of high pressure Piping, Pipeline laying , valves, Pressure Vessel, Storage Tanks, Heat Exchanger, Boiler, Column, Heater & structural as a QA/QC Engineer, QA/QC Multi discipline Inspector, Mechanical Inspector, Sr. Inspection Engineer, piping/pipeline Inspector, Welding Inspector, Plant Inspector & Field Inspector(vendor inspection).
Abc of resources in nature A Presentation By Mr Allah Dad Khan Former Direct...Mr.Allah Dad Khan
Abc of resources in nature A Presentation By Mr Allah Dad Khan Former Director General Agriculture Extension KPK Province and Visiting Professor the University of Agriculture Peshawar
1. 1
CURRICULUM – VITAE
Facility and Inspection Engineer
-------------------------------------------------------------------------------------------------------------------------------------------
Full Name : Mohamed Abd Ellatif Abd Ellatif Hatata
Marital status : Married
Passport No. : A00994290
Nationality : Egyptian
Date of birth : 10ᵗ ͪ of October 1977
Phone : +2 01223534523 (Egypt)
E-mail : mohamedhatata@yahoo.com
Qualification:
B.Sc. in metallurgical and material science engineering, Faculty of Petroleum and Mining
Engineering, Suez Canal University – graduation year 2001
C-SWIP welding inspector 3.1 (Certificate No. 29755 )
API 570 Certified Piping Inspector ( Certificate No. 39974)
API 510 certified pressure vessel inspector (Certificate No.48953 )
ASNT Level II in RT, PT & MT.
Experience Outline
Over 13 years’ experience of extensive integrity & Inspection and construction for major oil
and gas field including the following:-
Provide recommendations on choice of repair procedures for piping ,storage tanks
and pressure vessels , selection of materials etc. in accordance with Company’s
and international standard
Demonstrate effective overall leadership and partnership with all departments
Assist and participate in the design of new oil plant projects Like well heads design &
water flood system design etc.
Demonstrate commitment in establishing and maintaining the company procedures
and processes; HSE, Security and Emergency Response etc
Check & manage periodically audit on site to verify the application of agreed work
plans, during pre-commissioning, commissioning and startup of work activities
Participate in HAZOP, HAZID, Incident Investigation and Risk Assessments
Ensure and approve written procedures and management of change processes
(MOC) is mandatory for all work activities
Ensure that investigations and lessons-learned are communicated and followed with
focus on improving WD safety performance
Inspect plant stationary equipment by entering into vessel, to check condition of
equipment. Includes noting observations on cracks, pits, thinning and any other
patterns of erosion, corrosion and other interior failure. And evaluate the inspection
findings , provide repair procedure to restore the required designed data
Provide support to the piping and equipment layout design relevant to the assigned
unit or area.
Review piping general arrangements and piping isometrics relevant to the assigned
unit or area.
Manage piping isometrics in the reference P&IDs.
Provide piping material takeoffs and bill of materials documents. Oversee piping and
layout design specifications and construction standards
To supervise and participates in non-destructive testing of equipment and piping,
including review of preliminary interpretations carried out by subordinates
2. 2
Employment History:
From December 2010 Till now, my employer is Apache corp. at Western Desert
filed (Khalda Joint venture ) as Senior integrity Inspection engineer .
From October 2006 up to October 2010 ,I Have been worked for BP EGYPT , at
Western desert filed (GUPCO Joint venture) as an facility inspection and
construction Engineer
From April 2005 up to October 2006 ,I Have been worked for Quality control
company , at Western desert filed (GUPCO) as QA /QC Engineer
From July 2004 up to march .2005 I have been worked for Bonatti company ,
located in Libya , as Welding inspector Engineer
From March 2003 up to June 2004 , I have been work for DSD Ferometalco ,
located in Egypt ,as QA/QC Engineer
Experience Details:
From December 2010 till Now
Location : Western Desert . Egypt
Employer : Apache Corp,
Company : KHALDA PETRELUEM COMPANY
Title : Senior stuff facility inspection engineer
My Duties and responsibilities as following:-
Assist and approve in the design of new projects Like water flood systems & oil
manifolds & new well head design of oil and gas well ,Tie in of new well with existing
facility
Provide recommendations on choice of repair procedures for piping ,storage tanks
and pressure vessels , selection of materials etc. in accordance with Company’s
and international standard
Issue Repair procedure for storage Tanks for Bottom replacement and shell insert
plates
Inspect plant stationary equipment by entering into vessel, to check condition of
equipment. Includes noting observations on cracks, pits, thinning and any other
patterns of erosion, corrosion and submit repair procedure
Ensure written procedures and management of change processes (MOC) is
mandatory for all work activities
Participate and Leader in planning shut down inspection activities.
Review inspection reports and evaluate equipment integrity.
Review test packages and punch lists, witness and approve pre-commissioning
cleaning gouging, hydrostatic tests, Flushing and commissioning work.
Responsible for the approval all the time frame of new projects.
Review job safety specifications for pipelines operation and project tie-in and
isolation requirements
Review job specifications for piping fabrication, inspection and testing, and hydro
test, commissioning and startup Procedures for new and existing pipelines.
Provide support to the piping and equipment layout design relevant to the assigned
unit or area.
Review piping general arrangements and piping isometrics relevant to the assigned
unit or area. Manage piping Isometrics in the reference P&IDs. –
Provide piping bulk material takeoffs and bill of materials documents. Oversee piping
and layout design specifications and construction standards
3. 3
Provide guidance for performing corrosion calculations and interpretation of
metallurgical codes and standards with its imprecision on detail design.
Work effectively as a project engineer or site team leader on delegated tasks
including co-coordinating and allocated resources and collect all required material
Maintain professional engineering standards in all activities. Ensure that safety,
environmental protection and statutory requirements are satisfactorily addressed. Act
ethically and encourage others to do
From October 2006 up to October 2010
Location : Western Desert . Egypt
Employer : IBS - BP EGYPT,
Company : GUPCO PETRELUEM COMPANY – BP joint venture
Titel : integrity inspection engineer
Duties and responsibilities as following:
Provide recommendations on choice of repair procedures for piping ,storage tanks
and BV, selection of materials etc. in accordance with Company’s and international
standard
Demonstrate commitment in establishing and maintaining the company procedures
and processes; HSE, Security and Emergency Response etc
Review previous inspection history of all refurbished equipment.
Inspection of refurbished pressures equipment such as Separators, Knock out
drums, Scrubbers, and storage tanks etc.
Ensure that investigations and lessons-learned are communicated and followed with
focus on improving WD safety performance
COW (Control of work ) training trainer including AA & PA training
Supervision and follow up welding, heat treatment and, Non-Destructive testing of
refurbished equipment and during the fabrication of new components.
Check & manage periodically audit on site to verify the application of agreed work
plans, during pre-commissioning, commissioning and startup of work activities
Ensure written procedures and management of change processes (MOC) is
mandatory for all work activities
Ensures that the asset registry for fixed equipment is maintained and communicates
threats to operation
Assist and participate in the design of new oil plant projects Like well heads design &
water flood system design etc
Provide fabrication QA and QC support for new projects, working in cooperation with
the Integration and Project Support group
To identify areas of concern and propose inspection procedures to follow-up their
resolution to improve Plants Integrity.
To comply with all company Health, Safety and Environment as well as Work Permit,
policies and procedures.
From April 2005 up to October 2006
Location : Western Desert . Egypt
Employer : Quality control company
Company : GUPCO PETRELUEM COMPANY – BP joint venture
Titel : QA /QC Engineer
Duties and responsibilities as following:
Prepare Inspection Close out reports For plot piping Inspections, reviews results, do
remaining life analysis and provide recommendations.
4. 4
Carry out thermal Insulation/lagging inspection for vessels and pipelines.
Ensures that completed work and services furnished by the contractor are in
compliance with company standard
Review raw material certificates
Monitoring &inspection for all welding activities for pipeline and steel structure , tanks
and pressure vessels
Review all welding procedures.
Follow up welder performance test.
Supervision of fabrication stage.
Radiographic testing interpretation.
From July 2004 up to March .2005
Project : western Libya gas Nc 41 onshore gas treatment plant (Mellita)
Client : AGIP GAS B
Employer : Bonatii
Title : Welding inspector engineer
Duties and responsibilities as following
Perform Inspection activities and it’s reporting according to the scope of work. -at all
stages of projects. And make sure that work is in compliance with the standards,
procedures and specifications of the project contract.
Inspect material & equipment to ensure compliance with standards and project
contracts -Writing periodical inspection reports and initiate (NCRs),
Witnessing and verification welder’s qualification, welding procedure and Procedure
qualification and approval.
Supervision during fabrication , welding and erection of API 650 - storage tanks
,Reviewing inspection test plan , specifications and method of statement of piping
installation Dimension Check for Drawing to Be Within Allowance of Standard
Conduct routine/regular surveillance, inspections on the activities involving welding,
materials, dimensional inspection on completed structures including witness/review
NDE results , quality plans and check /approve inspection reports .
Reviewing piping/tanks test packages & issue punch lists & supervision air blowing
inside piping spools(cleaning) and flushing , hydro-test of piping, pipelines, tanks and
vessels, verifying re-instatement of piping after completion of installation and
reviewing /issue mechanical completion
From March 2003 up to June 2004
Company : DSD Ferro metalco
Title : QA /QC Engineer
Project : Egypt LNG (liquefaction natural gas) in Damietta nickel storage tanks
(9 % NI )
Duties and responsibilities as following
Monitoring &inspection for all welding activities and installation for two tank 150,000
cubic meter capacity
Supervision of fabrication stage.
Radiographic testing interpretation.
Final documents and release.
Checking &periodically auditing on site to verify the application of P.Q.P
Reviewing &approaching distribution of P.Q.P to Protect quality plane
Periodical calibration of measuring &testing equipment &maintenance of record of
the calibration activities
5. 5
Assistance in discussion on the quality system with Client where appropriate.
Tacking the suitable correction / preventive action related to the non-conformities of
the product, follow up and issue inspection reports and record for equipment
performances.
Evaluate equipment condition as per inspection findings and gives the necessary
warnings and recommendations with respect to equipment remaining life time,
equipment isolation from service, spare ordering, temporary and permanent repairs
and modifications.
Training Courses
COURSE DATE LOCATION
Welding metallurgy/Material test (destructive and
nondestructive test)
July,2001 Egypt
Heat treatment/Corrosion and corrosion control/Metal
forming Oxidation at high temperatures
Thermodynamics and kinetics in metallurgy.
August,2000
Egypt
Radiographic Testing January,2004 Egypt
Dye - Penetrant Testing January Egypt
Magnetic Particles Testing January Egypt
Certified welding inspector Cswip 3.1 June ,2007 Egypt
H2S/Breathing Apparatus July,2008 Egypt
Lifting authority by sparrow July,2008 Egypt
API 510 Certified pressure vessel inspector Feb.2012 Egypt
API 570 Certified Piping Inspector July,2010 Egypt
Confined Space Entry Nov.2012 Egypt
Working at high 2007 Egypt
Permits to work & hazards identification 2006 Egypt
Control of work training trainer 2008 Egypt
Energy isolation 2009 Egypt
Failure analysis workshop 2014 Egypt
Incident investigation workshop 2014 Egypt
Codes, Standards And Specifications Exposures:
ASME Sec. ( I, II,IV, V, VIII, IX ) & other sections
ANSI – ASME ( B 31.1, B 31.3 ) ) & other sections
API-(510,570,580,581,1104,650,653,620)&other
sections
AWS D1.1
ASTM - ASME - NACE- BS-
BP- GUPCO Specification
Computer Background:
Word
AutoCAD
Power point
Internet
Excel