HANDLING OF HAZARDOUS MATERIALS
•Download as PPTX, PDF•
2 likes•1,914 views
Safety is paramount when handling hazardous chemicals in laboratories. Proper protective equipment like gloves and goggles should always be worn. Procedures for the safe storage, use and disposal of dangerous substances must be strictly followed to prevent accidents and protect human health.
Report
Share
Report
Share
Recommended
Chemcial handling
This document provides an overview of chemical hazards and safety. It discusses the classification of workplace hazards including physical, chemical, biological and ergonomic. It defines key terms like flash point, auto ignition temperature, threshold limit values and IDLH. It describes routes of chemical entry, health effects of chemicals on different organs, and carcinogens. The document provides guidance on personal protective equipment, respiratory protection, and controlling chemical exposure through engineering controls, hygiene and proper storage. It emphasizes the importance of material safety data sheets and following standard operating procedures to safely handle chemicals.
Storage and handling of chemicals
Handling of chemicals, handling of acids, ethers, calibration of burette, pipette, Heating methods, stirring methods, filtratio techniques, chemical balance and single pan balance
Hazardous Chemical handling
This document discusses proper handling of hazardous chemicals in the workplace. It defines hazardous chemicals as those that pose a risk to employees through exposure. It outlines categories of hazardous chemicals, physical states, routes of exposure, symptoms of overexposure, incompatible chemicals, and agencies that regulate storage. It provides guidance on labeling, material safety data sheets, health hazards, and controls. The overall message is that proper training and safety protocols are necessary when working with hazardous chemicals.
MATERIAL DATA SAFTY SHEETS
The document discusses Material Safety Data Sheets (MSDS), which contain information about the health effects of exposure to chemicals and safe handling procedures. An MSDS includes 16 sections with details like product information, hazards, first aid measures, and disposal considerations. Employers must make MSDSs available to workers exposed to hazardous materials and ensure they are understandable. The document also outlines key aspects of industrial health and safety, including identifying occupational hazards from plants, equipment, materials and tasks in order to implement controls to reduce risks. Hazard analysis methods are used to systematically identify potential issues.
CHEMICALS HAZARDS AND TOXICITY
Hazardous chemicals can cause harm to human health, property, or the environment. There are two main types of chemical hazards: physical hazards, which include flammable, reactive, and compressed gases; and health hazards, which can cause acute toxicity, cancer, or organ damage. The effects of chemicals depend on factors like exposure route, dose, and toxicity. To reduce risks, workplaces should minimize chemical use, improve ventilation, enforce hygiene and cleaning practices, and ensure proper use of personal protective equipment. Heavy metals like arsenic, lead, cadmium, chromium, and mercury can accumulate in the body and cause adverse health effects such as cancer, organ damage, and neurological or developmental issues depending on the metal.
Hazardous chemicals handling
This document provides information on classifying and labeling hazardous materials. It discusses the health effects of chemicals on humans and how they can enter the body. It describes common symptoms of chemical exposure and classifications of hazardous materials including explosives, flammable substances, toxic substances, corrosives, irritants, sensitizers, carcinogens, and substances dangerous to the environment. The document also covers labeling requirements, the Hazardous Materials Identification System (HMIS), and references several standards for hazardous materials classifications.
Chemical safety
The document discusses the properties, uses, and health hazards of various chemicals used in power plants, including sulfuric acid, hydrochloric acid, sodium hydroxide, ammonia, hydrazine, ferric chloride, polyelectrolyte, hydrated lime, tri-sodium phosphate, chlorine, and hydrogen. Protective equipment like respirators and chemical safety goggles are recommended when handling these chemicals. Exposure should be treated by flushing affected areas with water and seeking immediate medical attention.
Chemical Safety
This document provides an overview of OSHA's Hazard Communication Standard and chemical hazards. It discusses what constitutes a chemical hazard, physical and health hazards, and specific types of hazardous chemicals like flammables and corrosives. It describes the requirements of OSHA's Hazard Communication Standard including developing a written hazard communication program, obtaining material safety data sheets, labeling containers, and training employees. The purpose is to ensure chemical hazards are evaluated and information about those hazards is communicated to employers and employees.
Recommended
Chemcial handling
This document provides an overview of chemical hazards and safety. It discusses the classification of workplace hazards including physical, chemical, biological and ergonomic. It defines key terms like flash point, auto ignition temperature, threshold limit values and IDLH. It describes routes of chemical entry, health effects of chemicals on different organs, and carcinogens. The document provides guidance on personal protective equipment, respiratory protection, and controlling chemical exposure through engineering controls, hygiene and proper storage. It emphasizes the importance of material safety data sheets and following standard operating procedures to safely handle chemicals.
Storage and handling of chemicals
Handling of chemicals, handling of acids, ethers, calibration of burette, pipette, Heating methods, stirring methods, filtratio techniques, chemical balance and single pan balance
Hazardous Chemical handling
This document discusses proper handling of hazardous chemicals in the workplace. It defines hazardous chemicals as those that pose a risk to employees through exposure. It outlines categories of hazardous chemicals, physical states, routes of exposure, symptoms of overexposure, incompatible chemicals, and agencies that regulate storage. It provides guidance on labeling, material safety data sheets, health hazards, and controls. The overall message is that proper training and safety protocols are necessary when working with hazardous chemicals.
MATERIAL DATA SAFTY SHEETS
The document discusses Material Safety Data Sheets (MSDS), which contain information about the health effects of exposure to chemicals and safe handling procedures. An MSDS includes 16 sections with details like product information, hazards, first aid measures, and disposal considerations. Employers must make MSDSs available to workers exposed to hazardous materials and ensure they are understandable. The document also outlines key aspects of industrial health and safety, including identifying occupational hazards from plants, equipment, materials and tasks in order to implement controls to reduce risks. Hazard analysis methods are used to systematically identify potential issues.
CHEMICALS HAZARDS AND TOXICITY
Hazardous chemicals can cause harm to human health, property, or the environment. There are two main types of chemical hazards: physical hazards, which include flammable, reactive, and compressed gases; and health hazards, which can cause acute toxicity, cancer, or organ damage. The effects of chemicals depend on factors like exposure route, dose, and toxicity. To reduce risks, workplaces should minimize chemical use, improve ventilation, enforce hygiene and cleaning practices, and ensure proper use of personal protective equipment. Heavy metals like arsenic, lead, cadmium, chromium, and mercury can accumulate in the body and cause adverse health effects such as cancer, organ damage, and neurological or developmental issues depending on the metal.
Hazardous chemicals handling
This document provides information on classifying and labeling hazardous materials. It discusses the health effects of chemicals on humans and how they can enter the body. It describes common symptoms of chemical exposure and classifications of hazardous materials including explosives, flammable substances, toxic substances, corrosives, irritants, sensitizers, carcinogens, and substances dangerous to the environment. The document also covers labeling requirements, the Hazardous Materials Identification System (HMIS), and references several standards for hazardous materials classifications.
Chemical safety
The document discusses the properties, uses, and health hazards of various chemicals used in power plants, including sulfuric acid, hydrochloric acid, sodium hydroxide, ammonia, hydrazine, ferric chloride, polyelectrolyte, hydrated lime, tri-sodium phosphate, chlorine, and hydrogen. Protective equipment like respirators and chemical safety goggles are recommended when handling these chemicals. Exposure should be treated by flushing affected areas with water and seeking immediate medical attention.
Chemical Safety
This document provides an overview of OSHA's Hazard Communication Standard and chemical hazards. It discusses what constitutes a chemical hazard, physical and health hazards, and specific types of hazardous chemicals like flammables and corrosives. It describes the requirements of OSHA's Hazard Communication Standard including developing a written hazard communication program, obtaining material safety data sheets, labeling containers, and training employees. The purpose is to ensure chemical hazards are evaluated and information about those hazards is communicated to employers and employees.
Chemical handling.ppt
Chemicals are the most common and significant health hazards and Chemicals can be hazardous for numerous reasons and can combine with other chemicals to make new hazards.
Therefore All hazards must be taken into account when using and storing chemicals.
# Understand that chemicals hazards.
# Understand that safe storage is an important issue.
# Understand that many chemical injuries result from
improper storage.
# Know four basic rules of chemical safety.
# Be aware of the categories of dangerous chemicals
and appropriate safety precautions.
Industrial hazards and safety
This document discusses industrial safety hazards. It begins by defining key terms like hazard, industrial hazard, safety, and types of accidents. It then describes several common types of industrial hazards like electrical, chemical, gas, dust explosions, and fire/explosion. It outlines causes of accidents from both human failure and machine failure. The document discusses principles of safety programs and their elements. It provides guidance on selecting proper protective equipment for different body parts. Finally, it summarizes guidelines for safely working with electrical, chemical, compressed gas, and dust hazards.
Chemical Hazards Training Presentation
This document provides an overview of chemical hazards and safety training. It defines chemical hazards as any chemicals that can cause illness, injury or emergencies. It describes the different types of chemical hazards including health hazards from toxic chemicals and physical hazards from flammable or reactive chemicals. The document outlines how chemicals can enter the body and effective controls to prevent exposure. It also discusses hazard classifications, labels and tags, personal protective equipment, and responsibilities for safely handling chemicals.
Chemicals Safety Presentation
The document provides information on chemical safety, including what chemical substances are, the forms chemicals can take, how chemicals can be hazardous to health, assessing risks from chemical exposure, effects chemicals can have on the body, how chemicals enter the body, and control measures for chemicals including identifying hazards, assessing exposure and risk, implementing engineering and administrative controls, providing training, safely storing and handling chemicals, and using personal protective equipment.
MSDS Presentation
The document provides an orientation on Material Safety Data Sheets (MSDS). It discusses the definition, importance, and standard formats of MSDS, including OSHA, ANSI, NFPA, and HMIS formats. It explains how to read an MSDS and covers technical terms commonly used in MSDS, such as how chemicals can enter the body through absorption, inhalation, and ingestion. The presentation aims to familiarize attendees with MSDS and improve safety when handling chemicals.
Material Safety Data Sheet
The document discusses the key sections of a Material Safety Data Sheet (MSDS), which provides information on the properties and potential hazards of chemicals. An MSDS includes 16 sections that cover identification of the chemical/mixture and supplier; hazards; composition; first aid measures; firefighting measures; accidental release measures; handling and storage; exposure controls and personal protection; physical and chemical properties; stability and reactivity; toxicological information; ecological information; disposal considerations; transport information; and other information such as regulatory information. The MSDS provides important information to ensure chemicals are handled safely.
CHEMICAL HAZARDS
what Is a Chemical Hazard? chemical hazards. A chemical hazard is any substance that can cause harm, primarily to people.
Chemical hazards
This document discusses various chemical hazards found in industrial settings. It describes hazards as any situation that can cause harm, and risk as the probability of harm occurring. Chemical hazards include irritants, sensitizers, toxins, asphyxiants, anesthetics, systemic poisons, respiratory fibrogens and carcinogens. It provides examples of some chemicals that fall into each category and their effects. The document also discusses concepts like threshold limit values (TLV), lethal dosage levels, and methods to control risks from chemical exposure like proper training, chemical identification and storage separation.
CHEMICAL HAZARDS
Chemical hazards can occur when employees are exposed to chemicals in solid, liquid, or gas form through inhalation, skin contact, or ingestion. Examples of chemical hazards include vapors, fumes, mists, gases, and liquids from cleaning products, solvents, carbon monoxide, gasoline, and other flammable materials. To prevent chemical hazards, employers should require protective equipment like gloves, masks, eye wear, and clothing for employees who come into contact with harmful chemicals, especially those working in manufacturing or laboratory settings.
Safe Chemical Handling & Initial Spill Response
This presentation was prepared for the Sixteenth Annual Southeastern Massachusetts Drinking Water Fair held on June 16, 2011 at the Massachusetts Maritime Academy. The event was hosted by the Barnstable County Water Utilities Association and the Plymouth County Water Works Association. Attendees received Training Contact Hours (TCHs).
MATERIAL SAFETY DATA SHEET or SAFETY DATA SHEET
MSDS is a document that contains information on the potential health effects of exposure to chemicals, or other potentially dangerous substances, and on safe working procedures when handling chemical products
MSDS- Material Safety Data Sheet
The document discusses Material Safety Data Sheets (MSDS), including what they are, their purpose, and their required contents. An MSDS provides information on potential hazards of a chemical product and safe handling practices. It contains 16 sections covering identification, hazards, ingredients, first aid, firefighting, accidental release measures, handling and storage, exposure controls, physical/chemical properties, stability, toxicology, ecology, disposal, transportation, regulations, and other information. National regulations in India for MSDS authoring fall under the Ministry of Environment & Forests.
chemical safety
This document discusses occupational health hazards, specifically chemical hazards. It defines occupational health as recognizing, evaluating, and controlling workplace hazards that can cause illness. It then discusses the main types of chemical hazards: dusts, fumes, mists, fibers, gases, and vapors. For each hazard type, it provides examples of chemicals that fall into that category. It also discusses acute and chronic health effects of chemical exposures. Threshold limit values and time-weighted average concentrations are defined as metrics for safe chemical exposure levels. Specific health and safety information is then provided for sulfuric acid and sodium hydroxide, two common industrial chemicals.
Safety In Storage / handling / Transportation Of Chemicals. By Bimal Chandra...
The document provides guidelines for safely storing, handling, transporting, and loading/unloading chemicals, including constructing storage tanks with proper foundations and markings, keeping incompatible chemicals separated, using personal protective equipment, affixing labels to vehicles, and ensuring operators and drivers are trained in chemical hazards.
Lecture 5-_chemical_hazard_and_biological_hazard
This document discusses chemical and biological hazards. It begins by outlining the learning outcomes, which are to describe chemical and biological hazards, explain control and prevention strategies, and discuss indoor air quality issues. It then covers definitions of chemical hazards, how to identify, assess, and control chemical hazards in industries. It discusses indoor air quality problems and sick building syndrome. Biological hazards are defined and examples are provided. Routes of biological hazard entry and examples of occupations exposed are outlined. Finally, strategies for controlling biological hazards are presented, including engineering, administrative, and personal protective controls.
MSDS Safety
An MSDS provides essential safety information about chemicals, including identification, hazards, safe handling and storage, emergency response, and disposal. It has 8 sections detailing the product, ingredients, physical properties, fire risks, reactivity, health effects, proper usage, and special precautions. Employers must make MSDSs available for all hazardous chemicals and workers must be trained to understand them, in compliance with OSHA regulations. The MSDS communicates everything needed to work safely with chemicals.
Hazchem codification
The HAZCHEM code uses a diamond pictogram divided into four sections to represent the health, flammability, reactivity, and additional hazards of chemicals. Each hazard is assigned a color and ranked on a scale of 0 to 4 to indicate its intensity, with 4 being the most hazardous. Additional hazard information like water reactivity or oxidizing properties can be included in the blank fourth section.
MSDS Training by University of Sheffield
The document describes the key information contained in a Material Safety Data Sheet (MSDS), including identification of the product and its ingredients, hazards identified, first aid measures, handling and storage requirements, exposure controls, physical and chemical properties, toxicological information, and disposal considerations. An MSDS provides important safety information about a product but is not a substitute for conducting a risk assessment when using chemicals. It should be consulted to help identify hazards but risk controls must be proportional to actual risk levels.
Msds training
The document discusses Material Safety Data Sheets (MSDS), which provide important safety information about chemical products. An MSDS reveals a product's chemical composition, associated health hazards, risk reduction measures, and emergency response procedures. Employers must make MSDS available to employees, who must access relevant sheets before working with chemicals. MSDS are located in different departments and electronically, and contain sections with details like chemical properties, exposure limits, safe handling instructions, and first aid measures. Identification systems like NFPA and HMIS use color-coding and ratings to communicate hazard severity.
MAGNETIC PROPERTIES OF TRANSITION METALS ,GARNETS, PEROVSKITES
This document provides an overview of magnetic properties in transition metals, complex compounds, and interstitial compounds. Specifically, it discusses diamagnetism, paramagnetism, and ferromagnetism in transition metals and their magnetic moments. It also examines magnetic properties in complex compounds like perovskites and garnets, referencing several textbooks on inorganic chemistry.
organoplatinum chemistry
This document discusses organoplatinum chemistry and summarizes different organoplatinum compounds. Organoplatinum chemistry involves organometallic compounds containing a carbon-platinum bond. Organoplatinum compounds exist in oxidation states from 0 to IV, with oxidation state II being the most abundant. Organoplatinum(0) compounds contain alkene and alkyne ligands as two electron donors. Organoplatinum(I) compounds are uncommon but are diamagnetic due to Pt-Pt bonds. A historically significant organoplatinum(II) compound is Zeise's salt, obtained from ethylene and potassium tetrachloroplatinate. Organoplatinum(IV) compounds include trimethyl
More Related Content
What's hot
Chemical handling.ppt
Chemicals are the most common and significant health hazards and Chemicals can be hazardous for numerous reasons and can combine with other chemicals to make new hazards.
Therefore All hazards must be taken into account when using and storing chemicals.
# Understand that chemicals hazards.
# Understand that safe storage is an important issue.
# Understand that many chemical injuries result from
improper storage.
# Know four basic rules of chemical safety.
# Be aware of the categories of dangerous chemicals
and appropriate safety precautions.
Industrial hazards and safety
This document discusses industrial safety hazards. It begins by defining key terms like hazard, industrial hazard, safety, and types of accidents. It then describes several common types of industrial hazards like electrical, chemical, gas, dust explosions, and fire/explosion. It outlines causes of accidents from both human failure and machine failure. The document discusses principles of safety programs and their elements. It provides guidance on selecting proper protective equipment for different body parts. Finally, it summarizes guidelines for safely working with electrical, chemical, compressed gas, and dust hazards.
Chemical Hazards Training Presentation
This document provides an overview of chemical hazards and safety training. It defines chemical hazards as any chemicals that can cause illness, injury or emergencies. It describes the different types of chemical hazards including health hazards from toxic chemicals and physical hazards from flammable or reactive chemicals. The document outlines how chemicals can enter the body and effective controls to prevent exposure. It also discusses hazard classifications, labels and tags, personal protective equipment, and responsibilities for safely handling chemicals.
Chemicals Safety Presentation
The document provides information on chemical safety, including what chemical substances are, the forms chemicals can take, how chemicals can be hazardous to health, assessing risks from chemical exposure, effects chemicals can have on the body, how chemicals enter the body, and control measures for chemicals including identifying hazards, assessing exposure and risk, implementing engineering and administrative controls, providing training, safely storing and handling chemicals, and using personal protective equipment.
MSDS Presentation
The document provides an orientation on Material Safety Data Sheets (MSDS). It discusses the definition, importance, and standard formats of MSDS, including OSHA, ANSI, NFPA, and HMIS formats. It explains how to read an MSDS and covers technical terms commonly used in MSDS, such as how chemicals can enter the body through absorption, inhalation, and ingestion. The presentation aims to familiarize attendees with MSDS and improve safety when handling chemicals.
Material Safety Data Sheet
The document discusses the key sections of a Material Safety Data Sheet (MSDS), which provides information on the properties and potential hazards of chemicals. An MSDS includes 16 sections that cover identification of the chemical/mixture and supplier; hazards; composition; first aid measures; firefighting measures; accidental release measures; handling and storage; exposure controls and personal protection; physical and chemical properties; stability and reactivity; toxicological information; ecological information; disposal considerations; transport information; and other information such as regulatory information. The MSDS provides important information to ensure chemicals are handled safely.
CHEMICAL HAZARDS
what Is a Chemical Hazard? chemical hazards. A chemical hazard is any substance that can cause harm, primarily to people.
Chemical hazards
This document discusses various chemical hazards found in industrial settings. It describes hazards as any situation that can cause harm, and risk as the probability of harm occurring. Chemical hazards include irritants, sensitizers, toxins, asphyxiants, anesthetics, systemic poisons, respiratory fibrogens and carcinogens. It provides examples of some chemicals that fall into each category and their effects. The document also discusses concepts like threshold limit values (TLV), lethal dosage levels, and methods to control risks from chemical exposure like proper training, chemical identification and storage separation.
CHEMICAL HAZARDS
Chemical hazards can occur when employees are exposed to chemicals in solid, liquid, or gas form through inhalation, skin contact, or ingestion. Examples of chemical hazards include vapors, fumes, mists, gases, and liquids from cleaning products, solvents, carbon monoxide, gasoline, and other flammable materials. To prevent chemical hazards, employers should require protective equipment like gloves, masks, eye wear, and clothing for employees who come into contact with harmful chemicals, especially those working in manufacturing or laboratory settings.
Safe Chemical Handling & Initial Spill Response
This presentation was prepared for the Sixteenth Annual Southeastern Massachusetts Drinking Water Fair held on June 16, 2011 at the Massachusetts Maritime Academy. The event was hosted by the Barnstable County Water Utilities Association and the Plymouth County Water Works Association. Attendees received Training Contact Hours (TCHs).
MATERIAL SAFETY DATA SHEET or SAFETY DATA SHEET
MSDS is a document that contains information on the potential health effects of exposure to chemicals, or other potentially dangerous substances, and on safe working procedures when handling chemical products
MSDS- Material Safety Data Sheet
The document discusses Material Safety Data Sheets (MSDS), including what they are, their purpose, and their required contents. An MSDS provides information on potential hazards of a chemical product and safe handling practices. It contains 16 sections covering identification, hazards, ingredients, first aid, firefighting, accidental release measures, handling and storage, exposure controls, physical/chemical properties, stability, toxicology, ecology, disposal, transportation, regulations, and other information. National regulations in India for MSDS authoring fall under the Ministry of Environment & Forests.
chemical safety
This document discusses occupational health hazards, specifically chemical hazards. It defines occupational health as recognizing, evaluating, and controlling workplace hazards that can cause illness. It then discusses the main types of chemical hazards: dusts, fumes, mists, fibers, gases, and vapors. For each hazard type, it provides examples of chemicals that fall into that category. It also discusses acute and chronic health effects of chemical exposures. Threshold limit values and time-weighted average concentrations are defined as metrics for safe chemical exposure levels. Specific health and safety information is then provided for sulfuric acid and sodium hydroxide, two common industrial chemicals.
Safety In Storage / handling / Transportation Of Chemicals. By Bimal Chandra...
The document provides guidelines for safely storing, handling, transporting, and loading/unloading chemicals, including constructing storage tanks with proper foundations and markings, keeping incompatible chemicals separated, using personal protective equipment, affixing labels to vehicles, and ensuring operators and drivers are trained in chemical hazards.
Lecture 5-_chemical_hazard_and_biological_hazard
This document discusses chemical and biological hazards. It begins by outlining the learning outcomes, which are to describe chemical and biological hazards, explain control and prevention strategies, and discuss indoor air quality issues. It then covers definitions of chemical hazards, how to identify, assess, and control chemical hazards in industries. It discusses indoor air quality problems and sick building syndrome. Biological hazards are defined and examples are provided. Routes of biological hazard entry and examples of occupations exposed are outlined. Finally, strategies for controlling biological hazards are presented, including engineering, administrative, and personal protective controls.
MSDS Safety
An MSDS provides essential safety information about chemicals, including identification, hazards, safe handling and storage, emergency response, and disposal. It has 8 sections detailing the product, ingredients, physical properties, fire risks, reactivity, health effects, proper usage, and special precautions. Employers must make MSDSs available for all hazardous chemicals and workers must be trained to understand them, in compliance with OSHA regulations. The MSDS communicates everything needed to work safely with chemicals.
Hazchem codification
The HAZCHEM code uses a diamond pictogram divided into four sections to represent the health, flammability, reactivity, and additional hazards of chemicals. Each hazard is assigned a color and ranked on a scale of 0 to 4 to indicate its intensity, with 4 being the most hazardous. Additional hazard information like water reactivity or oxidizing properties can be included in the blank fourth section.
MSDS Training by University of Sheffield
The document describes the key information contained in a Material Safety Data Sheet (MSDS), including identification of the product and its ingredients, hazards identified, first aid measures, handling and storage requirements, exposure controls, physical and chemical properties, toxicological information, and disposal considerations. An MSDS provides important safety information about a product but is not a substitute for conducting a risk assessment when using chemicals. It should be consulted to help identify hazards but risk controls must be proportional to actual risk levels.
Msds training
The document discusses Material Safety Data Sheets (MSDS), which provide important safety information about chemical products. An MSDS reveals a product's chemical composition, associated health hazards, risk reduction measures, and emergency response procedures. Employers must make MSDS available to employees, who must access relevant sheets before working with chemicals. MSDS are located in different departments and electronically, and contain sections with details like chemical properties, exposure limits, safe handling instructions, and first aid measures. Identification systems like NFPA and HMIS use color-coding and ratings to communicate hazard severity.
What's hot (20)
Safety In Storage / handling / Transportation Of Chemicals. By Bimal Chandra...
Safety In Storage / handling / Transportation Of Chemicals. By Bimal Chandra...
More from sharmeenkhan15
MAGNETIC PROPERTIES OF TRANSITION METALS ,GARNETS, PEROVSKITES
This document provides an overview of magnetic properties in transition metals, complex compounds, and interstitial compounds. Specifically, it discusses diamagnetism, paramagnetism, and ferromagnetism in transition metals and their magnetic moments. It also examines magnetic properties in complex compounds like perovskites and garnets, referencing several textbooks on inorganic chemistry.
organoplatinum chemistry
This document discusses organoplatinum chemistry and summarizes different organoplatinum compounds. Organoplatinum chemistry involves organometallic compounds containing a carbon-platinum bond. Organoplatinum compounds exist in oxidation states from 0 to IV, with oxidation state II being the most abundant. Organoplatinum(0) compounds contain alkene and alkyne ligands as two electron donors. Organoplatinum(I) compounds are uncommon but are diamagnetic due to Pt-Pt bonds. A historically significant organoplatinum(II) compound is Zeise's salt, obtained from ethylene and potassium tetrachloroplatinate. Organoplatinum(IV) compounds include trimethyl
MOSSBAUER SPECTROSCOPY
Mossbauer spectroscopy is a technique that uses gamma ray photons to study the chemical environment of atomic nuclei. It works by exposing a solid sample to a beam of gamma rays from a radioactive source, and measuring the absorption of gamma rays by atomic nuclei in the sample. Information about the chemical environment of absorbing nuclei can be obtained from the absorption peaks in the spectra, which show gamma ray intensity as a function of the source velocity. Common radioactive sources used include cobalt-57 and tin-119, and the sample and source must contain nuclei of the same isotope.
mossbauer spectroscopy
Mossbauer spectroscopy involves the resonant absorption of gamma rays by atomic nuclei. It was first observed by Mossbauer in 1958, for which he received the Nobel Prize. The basic principles are that nuclei emitting gamma rays lose a small amount of energy to recoil, while absorbing nuclei must have slightly higher energy for resonance to occur. Doppler shift is used to scan the gamma ray energy through a range and bring the source and sample nuclei into resonance by accelerating the source. The technique provides information about oxidation states, spin states, and local environments of atoms in samples.
SUPER ACID ,SUPER BASE
This document discusses acid-base chemistry and super acids and bases. It defines acids as molecules that can donate protons or accept electron pairs in reactions. Bases are defined as substances that release hydroxide ions in aqueous solutions. Super acids are defined as having a greater acidity than 100% sulfuric acid, while super bases have a high affinity for protons. Examples of super acids include fluorosulfuric acid and triflic acid, while examples of super bases include lithium nitride and potassium hydride. The document discusses applications of super acids and bases in organic synthesis and catalysis.
BIOMINERALISATION
Biomineralization is the process by which living organisms produce minerals. It occurs through two main types: biologically controlled mineralization, where the organism controls mineral growth and placement, and biologically induced mineralization, where the organism modifies the environment to induce mineral formation. Calcium carbonate is a common biomineral found in marine organisms through photosynthesis raising the pH and carbonate concentration to precipitate calcium carbonate. Magnetite is also an important biomineral formed by magnetotactic bacteria, which synthesize chains of magnetic crystals called magnetosomes that act as a biological compass. Examples of other biogenic minerals include apatite in bones/teeth and iron oxides formed by various organisms.
solid solutions
This document discusses different types of solid solutions, including substitutional, interstitial, and complex solid solutions. It describes the requirements for forming substitutional solid solutions, such as similar ion size and charge. Interstitial solid solutions occur when the solute atom is smaller than the solvent atoms. Complex solid solutions can form through substitution of higher or lower valence cations, creating cation or anion vacancies or interstitials. X-ray powder diffraction is discussed as an experimental method to study solid solutions by determining unit cell dimensions and composition across a series.
classification of lewis bases
This document discusses the classification of Lewis bases based on frontier molecular orbital topology. It defines Lewis acids and bases and describes four types of Lewis bases: s-HOMO Lewis bases which have spherical highest occupied molecular orbitals; complex anion Lewis bases which have a hypervalent central cation saturated with anionic ligands; lobe-HOMO Lewis bases which are electron lone pair donor species with the electron pair in an sp3, sp2 or sp hybrid orbital; and π-HOMO Lewis bases which have delocalized electrons in highest occupied molecular orbitals over two or more p-orbitals such as those in alkenes, dienes and trienes. Examples are provided for each classification.
solid solutions
This document discusses solid solutions, which occur when atoms of a solute are present in the lattice of a solid solvent. It describes two types of solid solutions: substitutional and interstitial. Substitutional solid solutions can be ordered or disordered, depending on whether solute atoms randomly or regularly substitute for solvent atoms in the lattice. Interstitial solid solutions involve solute atoms fitting into the spaces between solvent atom sites in the lattice. References on inorganic structural chemistry and crystal chemistry are also provided.
liquid crystals
Liquid crystals are a state of matter that has properties between those of a conventional liquid and solid crystal. They may flow like a liquid but their molecules can be oriented in a crystal-like way. Friedrich Reinitzer discovered important features of cholesteric liquid crystals in 1888, including thermotropic, lyotropic, and metallotropic phases. Common liquid crystal phases are nematic, smectic, and cholesteric/chiral. Blue phases have a regular three-dimensional cubic structure of defects with a lattice period of several hundred nanometers. Liquid crystals can flow like liquids due to loss of positional order, and transition between solid and liquid crystal states caused by temperature change gives rise to thermotropic liquid crystals
line defects
This document is a paper on inorganic chemistry that discusses line defects in solids, specifically edge and screw dislocations. It was written by Sakshi Mishra for their M.Sc. Part 2, Semester 3 course. The paper references common solid state chemistry textbooks and building construction resources.
mossbauer spectroscopy
This document is about Mossbauer spectroscopy and discusses isomer shift, quadrupole interaction, and magnetic interaction. It analyzes Mossbauer spectroscopy and explains these three phenomena, and concludes with references for further reading on physical methods for chemists, instrumental methods of chemical analysis, and modern aspects of inorganic chemistry.
NMR SPECTROSCOPY
This document discusses proton magnetic resonance spectroscopy (NMR spectroscopy), specifically focusing on spin-spin coupling, coupling constants, and the different types of coupling that can occur including geminal, vicinal, and long range coupling. It explains that the coupling constant value increases with increasing bond angle and electronegativity. It also discusses first order spectra and provides examples of geminal, vicinal, and long range coupling, as well as factors that affect coupling constant values.
Inorganic REACTION MECHANISM
This document discusses techniques for determining the rate of inorganic chemical reactions. It describes three main techniques: direct chemical analysis, spectrophotometric methods, and electrochemical and flow methods. Direct chemical analysis involves directly analyzing reactants or products during a chemical change. Spectrophotometric methods measure how much a substance absorbs light at different wavelengths. Electrochemical and flow methods are useful for following the progress of chemical reactions, especially in sensor applications where reaction progress can determine analyte concentration. The document provides examples and details of each technique.
TWO COMPONENT SYSTEM
The document discusses different types of compound formations including compounds with congruent and incongruent melting points. It defines key terms like phase, component, degree of freedom, and explains concepts like the phase rule and how it relates the number of components, phases, and degrees of freedom in a system. Examples of systems forming compounds with congruent melting points like zinc-magnesium and systems forming compounds with incongruent melting points like picric acid-benzene are provided along with diagrams showing their phase diagrams.
DIODE ARRAY AND FLUORESCENCE DETECTOR
This document discusses HPLC detectors, focusing on diode array and fluorescence detectors. It provides details on how HPLC works to separate mixtures and describes common HPLC detectors. It explains that diode array detectors can detect absorption across a range of wavelengths to identify components, while fluorescence detectors use excitation and emission wavelengths to selectively detect some components. Both provide advantages like sensitivity and specificity over other detectors.
FRENKEL DEFECT
This document discusses Frenkel defects in solid state chemistry. It begins by introducing the topic of types of defects, specifically Frenkel defects, and mentions deriving the Frenkel defect. References are provided from three solid state chemistry textbooks on pages discussing Frenkel defects and solid state chemistry.
MASS SPECTROMETRY
This document discusses the topic of mass spectrometry and its applications in organic chemistry. It covers the basic principles of mass spectrometry, including molecular ion peaks, base peaks, and the nitrogen rule. It also examines fragmentation patterns in different classes of organic compounds. The document provides references for further reading on spectroscopy techniques and the spectroscopic identification of organic molecules.
ATOMIC ABSORPTION SPECTROSCOPY
The document discusses atomic spectroscopy based on plasma sources. It introduces atomic spectroscopy and explains that it involves using plasma sources to produce excited atoms that emit electromagnetic radiation of characteristic wavelengths. The principle and instrumentation of atomic spectroscopy are described. Various applications of atomic spectroscopy are also mentioned, such as its use in chemical analysis. References are provided for further reading on the topic.
TOXICITY OF METALLIC SPECIES
This document discusses the toxicity of various metallic species, including arsenic, copper, and chromium. It provides an introduction and then examines the sources, effects, and treatments for the toxicity of each metal, addressing arsenic toxicity first, followed by copper toxicity, and ending with chromium toxicity. It lists references used at the end.
More from sharmeenkhan15 (20)
MAGNETIC PROPERTIES OF TRANSITION METALS ,GARNETS, PEROVSKITES
MAGNETIC PROPERTIES OF TRANSITION METALS ,GARNETS, PEROVSKITES
Recently uploaded
Micronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero WaterTexas Alliance of Groundwater Districts
Presented at June 6-7 Texas Alliance of Groundwater Districts Business MeetingESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The technology uses reclaimed CO₂ as the dyeing medium in a closed loop process. When pressurized, CO₂ becomes supercritical (SC-CO₂). In this state CO₂ has a very high solvent power, allowing the dye to dissolve easily.
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/Cytokines and their role in immune regulation.pptx
This presentation covers the content and information on "Cytokines " and their role in immune regulation .
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
Phenomics assisted breeding in crop improvement
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
bordetella pertussis.................................ppt
Bordettela is a gram negative cocobacilli spread by air born drop let
Recently uploaded (20)
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptx
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
waterlessdyeingtechnolgyusing carbon dioxide chemicalspdf
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
8.Isolation of pure cultures and preservation of cultures.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Cytokines and their role in immune regulation.pptx
Cytokines and their role in immune regulation.pptx
bordetella pertussis.................................ppt
bordetella pertussis.................................ppt
HANDLING OF HAZARDOUS MATERIALS
- 1. GURU NANAK KHALSA COLLEGE INORGANIC CHEMISTRY (PAPER 4) BY SHARMEEN KHAN
- 2. TOPIC SAFETY IN CHEMICAL LABORATORIES: HANDLING OF HAZARDOUS MATERIALS
- 15. REFERENCES