Gas Chromatography laboratory equipments
•
0 likes•2 views
Gas Chromatography is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes. GC oven is capable of 9 temperature program ramps and hold steps, and features rapid cooling: 250 °C to 50 °C < 10 minutes. Accurate flow rate control via AFC has higher level repeatability of retention time and peak area, enabling specific level of analysis by means of dual FID detectors.
Report
Share
Report
Share
Download to read offline
Recommended
AccuThermo AW 820V Vacuum Rapid Thermal Anneal Equipment
The AccuThermo AW820V is a stand alone Vacuum RTP (Rapid Thermal Processing) system, which uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 900 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Gas Chromatography.pdf
Gas Chromatography is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes.
AccuThermo AW 820 Long Time Rapid Thermal Anneal Equipment
The document describes the AccuThermo AW820 rapid thermal processing system. It provides short heating periods from 1-900 seconds at precisely controlled temperatures using high intensity visible radiation. Key features include long steady time capability, advanced software for real-time control, consistent wafer-to-wafer repeatability, and fast heating and cooling rates. It is a production-proven standalone system for applications such as semiconductor manufacturing, compound semiconductors, MEMS, and more.
160729 ama instruments_datasheet_gc5000
The GC 5000 series are online gas chromatographs developed for the continuous monitoring of organic compounds in ambient air. They feature rugged and compact designs and can detect organic pollutants in the low ppb to ppt range. Various configurations are available to monitor compounds like BTEX, ozone precursors, and other organic pollutants. They use sample pre-concentration and thermal desorption for introduction of volatile organic compounds. Flame ionization and photoionization detectors provide sensitive detection of organic pollutants.
AccuThermo AW 810 Rapid Thermal Anneal Equipment
The AccuThermo AW810 was derived from the AG Associates 610 production-proven design. Allwin21 Corp. is the exclusive manufacturer of the AG Associates Heatpulse 610 desktop atmospheric RTP (Rapid Thermal Processing) system. The system uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 600 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Forced Convection Oven by ACMAS Technologies Pvt Ltd.
The Forced Convection Oven is specially designed to save the time of heating.The temperature inside Forced
Convection Oven is controlled either though hydraulic type thermostat or with digital controller or microprocessor based temperature controller cum indicators to achieve maximum accuracy.
Heatpulse 4100 s rapid thermal processor
This document provides information on a used Heatpulse 4100S Rapid Thermal Processor. It can process wafers from 3 to 6 inches in size with a temperature range of 400-1100°C. It has two gas lines and a stainless steel chamber. The price is available upon request and payment terms include 50% down with the purchase order and 50% before shipping. The lead time is estimated between 8 to 12 weeks. A 13 month warranty is included. Options like additional gas lines, wafer load stations and spare parts are available.
PAMS: A Study of Performance in Low and High Humidity Environments
This document discusses the effects of humidity on the analysis of low-level ozone precursor compounds (0.3-1 ppbv) using a gas chromatography system. An experimental setup was designed to dynamically dilute a PAMS gas standard under both high (77% RH) and dry humidity conditions. The results showed that the chromatograms and peak intensities were virtually identical between the high and low humidity samples, indicating that high humidity has little negative impact on the analysis of these compounds at low ppbv levels. This finding allows the use of dry gas standards without needing to prepare humidified standards.
Recommended
AccuThermo AW 820V Vacuum Rapid Thermal Anneal Equipment
The AccuThermo AW820V is a stand alone Vacuum RTP (Rapid Thermal Processing) system, which uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 900 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Gas Chromatography.pdf
Gas Chromatography is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes.
AccuThermo AW 820 Long Time Rapid Thermal Anneal Equipment
The document describes the AccuThermo AW820 rapid thermal processing system. It provides short heating periods from 1-900 seconds at precisely controlled temperatures using high intensity visible radiation. Key features include long steady time capability, advanced software for real-time control, consistent wafer-to-wafer repeatability, and fast heating and cooling rates. It is a production-proven standalone system for applications such as semiconductor manufacturing, compound semiconductors, MEMS, and more.
160729 ama instruments_datasheet_gc5000
The GC 5000 series are online gas chromatographs developed for the continuous monitoring of organic compounds in ambient air. They feature rugged and compact designs and can detect organic pollutants in the low ppb to ppt range. Various configurations are available to monitor compounds like BTEX, ozone precursors, and other organic pollutants. They use sample pre-concentration and thermal desorption for introduction of volatile organic compounds. Flame ionization and photoionization detectors provide sensitive detection of organic pollutants.
AccuThermo AW 810 Rapid Thermal Anneal Equipment
The AccuThermo AW810 was derived from the AG Associates 610 production-proven design. Allwin21 Corp. is the exclusive manufacturer of the AG Associates Heatpulse 610 desktop atmospheric RTP (Rapid Thermal Processing) system. The system uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 600 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Forced Convection Oven by ACMAS Technologies Pvt Ltd.
The Forced Convection Oven is specially designed to save the time of heating.The temperature inside Forced
Convection Oven is controlled either though hydraulic type thermostat or with digital controller or microprocessor based temperature controller cum indicators to achieve maximum accuracy.
Heatpulse 4100 s rapid thermal processor
This document provides information on a used Heatpulse 4100S Rapid Thermal Processor. It can process wafers from 3 to 6 inches in size with a temperature range of 400-1100°C. It has two gas lines and a stainless steel chamber. The price is available upon request and payment terms include 50% down with the purchase order and 50% before shipping. The lead time is estimated between 8 to 12 weeks. A 13 month warranty is included. Options like additional gas lines, wafer load stations and spare parts are available.
PAMS: A Study of Performance in Low and High Humidity Environments
This document discusses the effects of humidity on the analysis of low-level ozone precursor compounds (0.3-1 ppbv) using a gas chromatography system. An experimental setup was designed to dynamically dilute a PAMS gas standard under both high (77% RH) and dry humidity conditions. The results showed that the chromatograms and peak intensities were virtually identical between the high and low humidity samples, indicating that high humidity has little negative impact on the analysis of these compounds at low ppbv levels. This finding allows the use of dry gas standards without needing to prepare humidified standards.
pH electrodes-pH sensors CPS41
Ceraliquid CPS41 and CPS41D with ceramic diaphragm and liquid KCl electrolyte, optional built-in temperature sensor. Email: lam.nguyen@vietan-enviro.com HP: 0945 29329
Heatpulse 4100 rapid thermal processor
Heatpulse 4100 rapid thermal processor:Wafer size: 3 to 6 inch capability. Customer will specify the wafer size. Temperature: 400-1100 °C with ERP Pyrometer. Maximum 1250 °C(Not recommend). Gas lines: 2 gas lines with 2 MFC. N2,O2 or Ar.
Voc72 m compounds analyser datasheet 0
The VOC72M is a portable gas chromatography instrument that can measure volatile organic compounds like benzene, toluene, and xylene in ambient air. It works by sampling air onto an adsorption trap, thermally desorbing the compounds into a gas chromatography column for separation, and detecting the compounds with a photoionization detector. The instrument performs fully automated sampling, analysis, and data processing in cycles as short as 10 minutes. It provides sensitive and stable measurements that meet regulatory standards for ambient air monitoring of volatile organic compounds.
Heatpulse 4108 rapid thermal processor
This document summarizes the specifications and details of a used Heatpulse 4108 Rapid Thermal Processor. Key details include:
- It is a single wafer, automatic rapid thermal processing system from AG Associates.
- Wafer sizes from 3-8 inches can be processed with temperature capabilities of 400-1100°C.
- It features 2 gas lines, temperature ramping up to 180°C/second, and temperature uniformity of ±10°C.
- The system dimensions are provided and it requires 208V or 400V 3-phase power.
Lead free reflow oven s-1000
The document describes the S-1000 lead-free reflow oven from Southern Machinery. It has maintained a large market share for many years due to its unparalleled heating performance and precise temperature control system. The reflow oven meets requirements for various welding processes. It has a new design that fully meets the needs of diverse electronic manufacturing processes. Key features include a PC and PLC control system that ensures high temperature stability and uniformity. It also has safety and monitoring functions as well as optional flux processing. The reflow oven is suitable for applications in communications, automobiles, appliances, computers and other industries.
Thermal analysis
widely used in all kinds of materials and product research and development in chemical field，process optimization and new quality inspection, etc, mainly measuring heat-related physical and chemical changes, such as physical melting point, crystallization melting hot phase crystallization heat, heat, heat stability (oxidation induced phase), glass transition temperature, etc.
Reflow Oven S-1000
The document summarizes the features and specifications of the S-1000 lead-free reflow oven produced by Southern Machinery. The S-1000 uses a PC and PLC control system to maintain temperature stability above 99.99% and features temperature zone design for optimal temperature uniformity. It is suitable for a variety of electronic manufacturing processes and complies with various industry standards. Southern Machinery provides temperature testing results showing the S-1000 meets tight tolerances for temperature accuracy and repeatability.
Heatpulse 8108 rapid thermal processor
Heatpulse 8108 rapid thermal processor: Wafer size: 3 to 8 inch capability. Customer will specify the wafer size
Temperature: 400-1100 °C with ERP Pyrometer. Maximum 1250 °C(Not recommend)
Gas lines: 2 gas lines with 2 MFC. N2,O2 or Ar.
Price: Pls email us with your RFQ in detail. Appreciate your time.
Gc 6890-Gas-chromatograph
GC-6890 Gas Chromatograph can be used to measure residual solvent for packaging industry or other related industries and detecting institutions. It is the best choice for the determination of residual solvent, smell analysis, and solvent purity.
GC-6890-Gas-Chromatograph
GC-6890 Gas Chromatograph can be used to measure residual solvent for packaging industry or other related industries and detecting institutions. It is the best choice for the determination of residual solvent, smell analysis, and solvent purity.
GC-6890-Gas Chromatograph for Cigarette Packaging Materials
The document describes the GC-6890 Gas Chromatograph manufactured by Labthink Instruments Co. Ltd. It can be used to measure residual solvents in packaging materials and detect solvent purity. The GC-6890 uses a hydrogen flame ionization detector and is controlled by a microcomputer. It allows for constant temperature or temperature programming and automated sampling. The GC-6890 provides reliable separation and analysis of mixtures for applications such as residual solvent testing in packaging materials and purity analysis of solvents.
Lead free reflow oven s-8800
The document describes the S-8800 lead-free reflow oven produced by Southern Machinery. The S-8800 is a mature product meeting market demand for lead-free reflow processes. It features a PC+PLC control system for precise temperature control and monitoring software. The oven is suitable for industries like communications, automotive electronics, and consumer products. It aims to provide stable heating performance, safety protections, and ease of use.
New ag associates heatpulse 210 rapid thermal annealing system
Allwin21 Corp is the exclusive manufacturer of AG Associates Heatpulse 610 rapid thermal processing (RTP) equipment. RTP uses high intensity lamps to heat silicon wafers to temperatures up to 1250°C in seconds for processes like dopant activation, thermal oxidation, and chemical vapor deposition. Allwin21's AccuThermo AW RTP systems provide improved temperature control, repeatability, uniformity, and stability compared to traditional RTP systems due to advanced software and temperature control technologies developed over decades of research. RTP is used for short semiconductor manufacturing processes requiring fast heating and cooling, in contrast to longer batch furnace processes.
New ag associates heatpulse 410 rapid thermal annealing system
Allwin21 Corp is the exclusive manufacturer of AG Associates Heatpulse 610 rapid thermal processing (RTP) equipment. RTP uses high intensity lamps to heat silicon wafers to temperatures up to 1250°C in seconds for processes like dopant activation, thermal oxidation, and chemical vapor deposition. Compared to traditional batch furnaces, RTP provides faster heating and cooling rates, precise temperature control, and shorter process times. Allwin21's AccuThermo AW RTP systems offer advanced temperature control technologies for improved repeatability, uniformity, and stability in rapid thermal processing.
New ag associates heatpulse 610 rapid thermal annealing system
Allwin21 Corp is the exclusive manufacturer of AG Associates Heatpulse 610 rapid thermal processing (RTP) systems. The AccuThermo AW610 RTP uses high intensity lamps to heat single wafers for short periods of 1-600 seconds at precisely controlled temperatures for applications like dopant activation, thermal oxidation, and silicide formation. Key features include advanced temperature control software, consistent wafer-to-wafer repeatability, and small footprint. RTP provides advantages over conventional furnaces for semiconductor manufacturing processes requiring short, high temperature cycles.
AccuThermo AW 610 Rapid Thermal Annealing Equipment
The AccuThermo AW610 was derived from the AG Associates 610 production-proven design. Allwin21 Corp. is the exclusive manufacturer of the AG Associates Heatpulse 610 desktop atmospheric RTP (Rapid Thermal Processing) system. The system uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 600 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Bench Top Muffle Furnace (1750 °C) by ACMAS Technologies Pvt Ltd.
This document summarizes a benchtop 1750°C muffle furnace. It features a digital programmable controller, ceramic insulation for high energy efficiency, and safety features like a door switch. The furnace has a 8"x8"x8" chamber that can heat to 1750°C and includes a ceramic shelf. It is suitable for laboratory applications requiring controlled high temperature heating.
CASE STUDY Hybrid Cooling IIT Delhi 13.2.2019.pdf
The Indian Institute of Technology Delhi required a new high performance computing data center and disaster recovery center that would have the highest energy efficiency and lowest carbon footprint possible in Delhi. IBM proposed a design that included water-cooled chillers, free cooling technologies, variable speed pumping, thermal storage tanks, rear-door heat exchangers for very high density racks, and extensive automation and monitoring systems to achieve a PUE less than 1.4 for the data center and less than 1.5 for the disaster recovery center while meeting all other requirements. The design was analyzed to maximize free cooling hours and optimize equipment runtime to lower energy consumption.
Thermo analytical methods by vsp
Thermal analysis methods such as differential scanning calorimetry (DSC) can provide both qualitative and quantitative information about physical and chemical changes in materials as a function of temperature. DSC instruments work by measuring the heat flow into a sample as it is heated, cooled, or held isothermally. This allows the instrument to detect transitions like glass transitions, melting points, crystallization events, and chemical reactions. Key components of DSC instruments include the sample holder, furnace, temperature programmer, recording device, and atmosphere control. DSC has many applications in fields like pharmaceutical analysis, materials characterization, and reaction kinetics studies.
TORREY HILLS TECHNOLOGIES -SAN DIEGO
Torrey Hills Technologies, LLC e slider en el desarrollo y venta de materiales de la mas alta calidad a precios extremadamente competitivos, la fabricación de partes, y equipos para una gran variedad de industrias. El principal negocio de la empresa incluye molibdeno, tungsteno y sus aleaciones ,fabricados para el montaje de componentes micro electrónicos, y hornos de banda para la industria electrónica y la fabricación de celdas solares..
Daniel García: dgarcia@torreyhillstech.com
colorimeter laboratory equipment product
The color card reading colorimeter reads the colored samples. It is equipped with 2.4 inch screen to display the matching color card number on screen. It comes
with built in color chart where after each measurement, instrument makes a match with three color numbers from the color charts for the colorist’s reference.
Automatic Colony Counter laboratory equipment
Automatic Colony Counter is equipped with high resolution CCD Camera lens. Incorporated with advanced Smart Counter software for accurate automatic microbial
colony counting. Open platform design, bottom LED light source makes it user friendly counter. Encrypted USB-key guarantees data security, and convenient
data management.
More Related Content
Similar to Gas Chromatography laboratory equipments
pH electrodes-pH sensors CPS41
Ceraliquid CPS41 and CPS41D with ceramic diaphragm and liquid KCl electrolyte, optional built-in temperature sensor. Email: lam.nguyen@vietan-enviro.com HP: 0945 29329
Heatpulse 4100 rapid thermal processor
Heatpulse 4100 rapid thermal processor:Wafer size: 3 to 6 inch capability. Customer will specify the wafer size. Temperature: 400-1100 °C with ERP Pyrometer. Maximum 1250 °C(Not recommend). Gas lines: 2 gas lines with 2 MFC. N2,O2 or Ar.
Voc72 m compounds analyser datasheet 0
The VOC72M is a portable gas chromatography instrument that can measure volatile organic compounds like benzene, toluene, and xylene in ambient air. It works by sampling air onto an adsorption trap, thermally desorbing the compounds into a gas chromatography column for separation, and detecting the compounds with a photoionization detector. The instrument performs fully automated sampling, analysis, and data processing in cycles as short as 10 minutes. It provides sensitive and stable measurements that meet regulatory standards for ambient air monitoring of volatile organic compounds.
Heatpulse 4108 rapid thermal processor
This document summarizes the specifications and details of a used Heatpulse 4108 Rapid Thermal Processor. Key details include:
- It is a single wafer, automatic rapid thermal processing system from AG Associates.
- Wafer sizes from 3-8 inches can be processed with temperature capabilities of 400-1100°C.
- It features 2 gas lines, temperature ramping up to 180°C/second, and temperature uniformity of ±10°C.
- The system dimensions are provided and it requires 208V or 400V 3-phase power.
Lead free reflow oven s-1000
The document describes the S-1000 lead-free reflow oven from Southern Machinery. It has maintained a large market share for many years due to its unparalleled heating performance and precise temperature control system. The reflow oven meets requirements for various welding processes. It has a new design that fully meets the needs of diverse electronic manufacturing processes. Key features include a PC and PLC control system that ensures high temperature stability and uniformity. It also has safety and monitoring functions as well as optional flux processing. The reflow oven is suitable for applications in communications, automobiles, appliances, computers and other industries.
Thermal analysis
widely used in all kinds of materials and product research and development in chemical field，process optimization and new quality inspection, etc, mainly measuring heat-related physical and chemical changes, such as physical melting point, crystallization melting hot phase crystallization heat, heat, heat stability (oxidation induced phase), glass transition temperature, etc.
Reflow Oven S-1000
The document summarizes the features and specifications of the S-1000 lead-free reflow oven produced by Southern Machinery. The S-1000 uses a PC and PLC control system to maintain temperature stability above 99.99% and features temperature zone design for optimal temperature uniformity. It is suitable for a variety of electronic manufacturing processes and complies with various industry standards. Southern Machinery provides temperature testing results showing the S-1000 meets tight tolerances for temperature accuracy and repeatability.
Heatpulse 8108 rapid thermal processor
Heatpulse 8108 rapid thermal processor: Wafer size: 3 to 8 inch capability. Customer will specify the wafer size
Temperature: 400-1100 °C with ERP Pyrometer. Maximum 1250 °C(Not recommend)
Gas lines: 2 gas lines with 2 MFC. N2,O2 or Ar.
Price: Pls email us with your RFQ in detail. Appreciate your time.
Gc 6890-Gas-chromatograph
GC-6890 Gas Chromatograph can be used to measure residual solvent for packaging industry or other related industries and detecting institutions. It is the best choice for the determination of residual solvent, smell analysis, and solvent purity.
GC-6890-Gas-Chromatograph
GC-6890 Gas Chromatograph can be used to measure residual solvent for packaging industry or other related industries and detecting institutions. It is the best choice for the determination of residual solvent, smell analysis, and solvent purity.
GC-6890-Gas Chromatograph for Cigarette Packaging Materials
The document describes the GC-6890 Gas Chromatograph manufactured by Labthink Instruments Co. Ltd. It can be used to measure residual solvents in packaging materials and detect solvent purity. The GC-6890 uses a hydrogen flame ionization detector and is controlled by a microcomputer. It allows for constant temperature or temperature programming and automated sampling. The GC-6890 provides reliable separation and analysis of mixtures for applications such as residual solvent testing in packaging materials and purity analysis of solvents.
Lead free reflow oven s-8800
The document describes the S-8800 lead-free reflow oven produced by Southern Machinery. The S-8800 is a mature product meeting market demand for lead-free reflow processes. It features a PC+PLC control system for precise temperature control and monitoring software. The oven is suitable for industries like communications, automotive electronics, and consumer products. It aims to provide stable heating performance, safety protections, and ease of use.
New ag associates heatpulse 210 rapid thermal annealing system
Allwin21 Corp is the exclusive manufacturer of AG Associates Heatpulse 610 rapid thermal processing (RTP) equipment. RTP uses high intensity lamps to heat silicon wafers to temperatures up to 1250°C in seconds for processes like dopant activation, thermal oxidation, and chemical vapor deposition. Allwin21's AccuThermo AW RTP systems provide improved temperature control, repeatability, uniformity, and stability compared to traditional RTP systems due to advanced software and temperature control technologies developed over decades of research. RTP is used for short semiconductor manufacturing processes requiring fast heating and cooling, in contrast to longer batch furnace processes.
New ag associates heatpulse 410 rapid thermal annealing system
Allwin21 Corp is the exclusive manufacturer of AG Associates Heatpulse 610 rapid thermal processing (RTP) equipment. RTP uses high intensity lamps to heat silicon wafers to temperatures up to 1250°C in seconds for processes like dopant activation, thermal oxidation, and chemical vapor deposition. Compared to traditional batch furnaces, RTP provides faster heating and cooling rates, precise temperature control, and shorter process times. Allwin21's AccuThermo AW RTP systems offer advanced temperature control technologies for improved repeatability, uniformity, and stability in rapid thermal processing.
New ag associates heatpulse 610 rapid thermal annealing system
Allwin21 Corp is the exclusive manufacturer of AG Associates Heatpulse 610 rapid thermal processing (RTP) systems. The AccuThermo AW610 RTP uses high intensity lamps to heat single wafers for short periods of 1-600 seconds at precisely controlled temperatures for applications like dopant activation, thermal oxidation, and silicide formation. Key features include advanced temperature control software, consistent wafer-to-wafer repeatability, and small footprint. RTP provides advantages over conventional furnaces for semiconductor manufacturing processes requiring short, high temperature cycles.
AccuThermo AW 610 Rapid Thermal Annealing Equipment
The AccuThermo AW610 was derived from the AG Associates 610 production-proven design. Allwin21 Corp. is the exclusive manufacturer of the AG Associates Heatpulse 610 desktop atmospheric RTP (Rapid Thermal Processing) system. The system uses high intensity visible radiation to heat single wafer for short process periods of time at precisely controlled temperatures. The process periods are typically 1 600 seconds in duration, although periods of up to 9999 seconds can be selected. These capabilities, combined with the heating chamber's cold-wall design and superior heating uniformity, provide significant advantages over conventional furnace processing.
Bench Top Muffle Furnace (1750 °C) by ACMAS Technologies Pvt Ltd.
This document summarizes a benchtop 1750°C muffle furnace. It features a digital programmable controller, ceramic insulation for high energy efficiency, and safety features like a door switch. The furnace has a 8"x8"x8" chamber that can heat to 1750°C and includes a ceramic shelf. It is suitable for laboratory applications requiring controlled high temperature heating.
CASE STUDY Hybrid Cooling IIT Delhi 13.2.2019.pdf
The Indian Institute of Technology Delhi required a new high performance computing data center and disaster recovery center that would have the highest energy efficiency and lowest carbon footprint possible in Delhi. IBM proposed a design that included water-cooled chillers, free cooling technologies, variable speed pumping, thermal storage tanks, rear-door heat exchangers for very high density racks, and extensive automation and monitoring systems to achieve a PUE less than 1.4 for the data center and less than 1.5 for the disaster recovery center while meeting all other requirements. The design was analyzed to maximize free cooling hours and optimize equipment runtime to lower energy consumption.
Thermo analytical methods by vsp
Thermal analysis methods such as differential scanning calorimetry (DSC) can provide both qualitative and quantitative information about physical and chemical changes in materials as a function of temperature. DSC instruments work by measuring the heat flow into a sample as it is heated, cooled, or held isothermally. This allows the instrument to detect transitions like glass transitions, melting points, crystallization events, and chemical reactions. Key components of DSC instruments include the sample holder, furnace, temperature programmer, recording device, and atmosphere control. DSC has many applications in fields like pharmaceutical analysis, materials characterization, and reaction kinetics studies.
TORREY HILLS TECHNOLOGIES -SAN DIEGO
Torrey Hills Technologies, LLC e slider en el desarrollo y venta de materiales de la mas alta calidad a precios extremadamente competitivos, la fabricación de partes, y equipos para una gran variedad de industrias. El principal negocio de la empresa incluye molibdeno, tungsteno y sus aleaciones ,fabricados para el montaje de componentes micro electrónicos, y hornos de banda para la industria electrónica y la fabricación de celdas solares..
Daniel García: dgarcia@torreyhillstech.com
Similar to Gas Chromatography laboratory equipments (20)
GC-6890-Gas Chromatograph for Cigarette Packaging Materials
GC-6890-Gas Chromatograph for Cigarette Packaging Materials
New ag associates heatpulse 210 rapid thermal annealing system
New ag associates heatpulse 210 rapid thermal annealing system
New ag associates heatpulse 410 rapid thermal annealing system
New ag associates heatpulse 410 rapid thermal annealing system
New ag associates heatpulse 610 rapid thermal annealing system
New ag associates heatpulse 610 rapid thermal annealing system
AccuThermo AW 610 Rapid Thermal Annealing Equipment
AccuThermo AW 610 Rapid Thermal Annealing Equipment
Bench Top Muffle Furnace (1750 °C) by ACMAS Technologies Pvt Ltd.
Bench Top Muffle Furnace (1750 °C) by ACMAS Technologies Pvt Ltd.
More from kimberlabtroninfo
colorimeter laboratory equipment product
The color card reading colorimeter reads the colored samples. It is equipped with 2.4 inch screen to display the matching color card number on screen. It comes
with built in color chart where after each measurement, instrument makes a match with three color numbers from the color charts for the colorist’s reference.
Automatic Colony Counter laboratory equipment
Automatic Colony Counter is equipped with high resolution CCD Camera lens. Incorporated with advanced Smart Counter software for accurate automatic microbial
colony counting. Open platform design, bottom LED light source makes it user friendly counter. Encrypted USB-key guarantees data security, and convenient
data management.
Cytotoxic Safety Cabinet laboratory equipment
Cytotoxic Safety Cabinet comes with Safety Height 200 mm (8 inches) of test opening, 440 mm (17 inches) of maximum opening, 465 m3/h (273 cfm) of exhaust volume
and 0.73m3 of internal work area. Maintaining cleanliness within the work zone for patient safety and product cleanliness. Provide highest level of operator
safety to protect the user’s personnel from hazardous compounds used in cytotoxic drugs. Incorporated with an advanced range of additional safety features.
Spacious knee room is provided for the operator in a sitting position, ensuring comfort during use.
PCR Cabinet laboratory equipment labtron
PCR Cabinet features a slide glass window maximizing light and visibility for the workstation. Equipped with a washable pre filter and 0.3 µm HEPA filter with
a speed adjustable airflow velocity ranging from 0.3 m/s to 0.5 m/s. Manual front and side anti-UV window enclosure with an opening of 320 mm ensures user
protection. Built-in preset 90 mins UV timer automatically switches off post 90 mins in preparation for next experiment. UV lamp can be switched "ON" only
on closure of front window ensuring user safety.
Ion-chromatograph-system laboratory equipment
Ion chromatograph system is a modular design ion chromatograph with an upgraded circuit technology. Bipolar conductivity detector, improves the detection
performance and stability of the instrument. Gradient elution system detects small molecules from complex samples. Built-in circulating stereo constant
temperature and other technologies ensures accurate and reliable experimental data.
Recirculating Chiller laboratory equipment
Recirculating Chiller is high performance circulating water pump with 0 to 1.5 bar pump capacity pressure. Its temperature ranges from 5˚C to 40˚C and offers
PT100 temperature sensor. Designed with TECUMSEH compressor in order to ensure cooling efficiency and reduce noise with PID temperature controlling technology.
Equipped with Over-temperature protection, auto-alarm function and Color LCD screen display for more running data and dynamic identifier.
Biochemistry Analyzer
Biochemistry analyzer is a fully automated floor standing unit with a direct reading system and random operational access. Features automated washing station for
both sample and reagent probe. Provision for liquid level detection a collision protection for both sample and reagent probe. Built-in cooling system for reagent
chamber.
Benchtop Multi-parameter Water Quality Meter
Benchtop multi-parameter water quality meter is comes with different measurement modes for quality and testing of water on different parameters.
It measures pH, Conductivity, TDS content from the test sample. It stores and recalls up to 500 sets of data. Calibration due reminder informs
operator to calibrate the meter regularly.
Benchtop Ion meter
Benchtop Ion meter for Cl, comes with (Cl) chloride ion selective electrode for chloride ion concentration measurement. This Ion meter comes with ± 0.5 % F.S.
measurement accuracy. The direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters
like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the
performance of ion selective electrode.
Benchtop Dissolved oxygen meter
Benchtop Dissolved oxygen meter is equipped with polarographic sensor to measure the dissolved oxygen content. The manual salinity & barometric pressure
compensation helps in accurate measurement of dissolved oxygen. The system menu of dissolved oxygen meter can set 6 parameters which includes the number
of calibration points, temperature units etc.
Colorimeter
Colorimeter is a durable photoelectric colorimeter with benchtop design. Equipped with specific light filters of the visible range (420 to 660 nm) to measure
the concertation and determine the color. Its three digit LED display shows Transmittance and Absorbance values.
Constant Temperature Water Bath
Constant Temperature Water Bath is a thermostatic water bath comprising nature water convection heat transfer configuration with stainless steel heating tube,
offers temperature range of RT +5°C to 100°C with fixed temperature operation and timing function. Features stretching inner chamber with 3.4 L of capacity
along with roof cover, and one-button operation. Incorporated PID temperature controller and NTC sensor with digital tube display, ensures precise auxiliary
and constant temperature. With timing wait function, auto stop function and over temperature alarm, it also offers deviation correction, menu key locked,
power failure back-up and power-off memory. Designed with cold – rolled steel plate outer shell, single shelf, single hole and chemical reagent resistance
surface coating, this water bath automatically stops working on water shortage to ensure safe product operation.
8 Hole Thermostatic Bath
8 Hole Thermostatic Bath is a 19.8 L bottom heating bath with a temperature range of 5°C to 99°C. Water sink is surface electrolysis treated with cold rolled
outer shell. Equipped with multi-section programmed control, touch button temperature setting mode and 3 digit temperature display. Easy to use,
controller allows the user to monitor and set temperature and time. Easy to use functions like deviation correction, menu key lock, power failure backup
and restoration of parameters on power off included.
6 Hole Thermostatic Bath
6 Hole Thermostatic Bath is a 19.3 L bottom heating bath with a temperature range of 5 °C ~ 100 °C. Water sink is surface electrolysis treated with cold
rolled outer shell. Equipped with multi-section programmed control, touch button temperature setting mode and 3 digit temperature display. Easy to use controls
allow the user to monitor and set temperature and time. Easy to use functions like deviation
Floor Balance
Floor Balance is high precision weighing scale with 160 kg capacity. The operation temperature range is from 5 to 25˚C and offers 10 g resolution.
Designed with LED display and load cell sensor. The measuring device is widely used by enterprises and scientific research institutions, weighing material
at large scale.
Atomic Fluorescence Spectrometer
Atomic Fluorescence Spectrometer is a microprocessor controlled double-channel, non-dispersive unit used for trace element composition, ultra-trace analysis
of Mercury and all other hydride-forming elements. Pre adjusted referral optical plane to coincide atomizer center with optical focus. Equipped with a feature
of real time conversion of data into graph.
Atomic Absorption Spectrophotometer
Atomic absorption spectrophotometer comes with Deuterium lamp for background correction, RS232 interface, Multi-linear and nonlinear curve fitting.
Its double beam system automatically compensates the light source drift and wavelength drift caused by the variation of temperature and electronic
circuit drift so as to reach a good basic line stability. The specially designed fine light beam passes through the flame to ensure a high precision
analytical test and low characteristic concentration in this atomic absorption spectrophotometer. It has multiple applications in research and
development and industrial analysis.
Ash Content Tester
Ash Content Tester is the device composed of muffle furnace, temperature controller and electric heating plate. It is small size and needs less land
with special fire-resistant material and heating components. The heating time is short and it has a long lifetime. It used to determine the ash in the range
0.001 to 0.180 mass %, from distillate and petroleum products.
Anaerobic Incubator
Anaerobic Incubator is a workstation especially designed to culture anaerobic micro-organisms for various studies. Features micro-computer control system,
UV sterilizer, stainless steel chamber, latex gloves, tough front glass window, de-oxidization catalyst, leakage protection etc. to ensure anaerobic environment
while working along with operator’s safety. Within 5 min anaerobic environment is created in the cultivation chamber while it takes less than 1 hr for the operation
chamber. It is used in microbiology labs, oil industry, soil research etc.
Handheld Airborne Particle Counter
Handheld airborne particle counter is a six channel microcomputer controlled particle counter. It offers a provision of simultaneous particle counting
in six different size ranges. Features like internal audible alarm and user-selectable alarm limits makes this device an ideal choice for clean room applications.
More from kimberlabtroninfo (20)
Recently uploaded
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
Gadgets for management of stored product pests_Dr.UPR.pdf
Insectsplayamajorroleinthedeteriorationoffoodgrainscausingbothquantitativeandqualitativelosses
Wellprovedthatnogranariescanbefilledwithgrainswithoutinsectsastheharvestedproducecontainegg(or)larvae(or)pupae(or)adultinsectinthembecauseoffieldcarryoverinfestationwhichcannotbeavoidedindevelopingcountrieslikeIndia
Simpletechnologiesfortimelydetectionofinsectsinthestoredproduceandtherebyplantimelycontrolmeasures
Sexuality - Issues, Attitude and Behaviour - Applied Social Psychology - Psyc...
A proprietary approach developed by bringing together the best of learning theories from Psychology, design principles from the world of visualization, and pedagogical methods from over a decade of training experience, that enables you to: Learn better, faster!
CLASS 12th CHEMISTRY SOLID STATE ppt (Animated)
Description:
Dive into the fascinating realm of solid-state physics with our meticulously crafted online PowerPoint presentation. This immersive educational resource offers a comprehensive exploration of the fundamental concepts, theories, and applications within the realm of solid-state physics.
From crystalline structures to semiconductor devices, this presentation delves into the intricate principles governing the behavior of solids, providing clear explanations and illustrative examples to enhance understanding. Whether you're a student delving into the subject for the first time or a seasoned researcher seeking to deepen your knowledge, our presentation offers valuable insights and in-depth analyses to cater to various levels of expertise.
Key topics covered include:
Crystal Structures: Unravel the mysteries of crystalline arrangements and their significance in determining material properties.
Band Theory: Explore the electronic band structure of solids and understand how it influences their conductive properties.
Semiconductor Physics: Delve into the behavior of semiconductors, including doping, carrier transport, and device applications.
Magnetic Properties: Investigate the magnetic behavior of solids, including ferromagnetism, antiferromagnetism, and ferrimagnetism.
Optical Properties: Examine the interaction of light with solids, including absorption, reflection, and transmission phenomena.
With visually engaging slides, informative content, and interactive elements, our online PowerPoint presentation serves as a valuable resource for students, educators, and enthusiasts alike, facilitating a deeper understanding of the captivating world of solid-state physics. Explore the intricacies of solid-state materials and unlock the secrets behind their remarkable properties with our comprehensive presentation.
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
Methods of grain storage Structures in India.pdf
•Post-harvestlossesaccountforabout10%oftotalfoodgrainsduetounscientificstorage,insects,rodents,micro-organismsetc.,
•Totalfoodgrainproductioninindiais311milliontonnesandstorageis145mt.InIndia,annualstoragelosseshavebeenestimated14mtworthofRs.7,000croreinwhichinsectsaloneaccountfornearlyRs.1,300crores.
•InIndiaoutofthetotalproduction,about30%ismarketablesurplus
•Remaining70%isretainedandstoredbyfarmersforconsumption,seed,feed.Hence,growerneedstoragefacilitytoholdaportionofproducetosellwhenthemarketingpriceisfavourable
•TradersandCo-operativesatmarketcentresneedstoragestructurestoholdgrainswhenthetransportfacilityisinadequate
Alternate Wetting and Drying - Climate Smart Agriculture
Alternate Wetting and Drying - Climate Smart AgricultureInternational Food Policy Research Institute- South Asia Office
PPT on Alternate Wetting and Drying presented at the three-day 'Training and Validation Workshop on Modules of Climate Smart Agriculture (CSA) Technologies in South Asia' workshop on April 22, 2024. Candidate young stellar objects in the S-cluster: Kinematic analysis of a sub...
Context. The observation of several L-band emission sources in the S cluster has led to a rich discussion of their nature. However, a definitive answer to the classification of the dusty objects requires an explanation for the detection of compact Doppler-shifted Brγ emission. The ionized hydrogen in combination with the observation of mid-infrared L-band continuum emission suggests that most of these sources are embedded in a dusty envelope. These embedded sources are part of the S-cluster, and their relationship to the S-stars is still under debate. To date, the question of the origin of these two populations has been vague, although all explanations favor migration processes for the individual cluster members. Aims. This work revisits the S-cluster and its dusty members orbiting the supermassive black hole SgrA* on bound Keplerian orbits from a kinematic perspective. The aim is to explore the Keplerian parameters for patterns that might imply a nonrandom distribution of the sample. Additionally, various analytical aspects are considered to address the nature of the dusty sources. Methods. Based on the photometric analysis, we estimated the individual H−K and K−L colors for the source sample and compared the results to known cluster members. The classification revealed a noticeable contrast between the S-stars and the dusty sources. To fit the flux-density distribution, we utilized the radiative transfer code HYPERION and implemented a young stellar object Class I model. We obtained the position angle from the Keplerian fit results; additionally, we analyzed the distribution of the inclinations and the longitudes of the ascending node. Results. The colors of the dusty sources suggest a stellar nature consistent with the spectral energy distribution in the near and midinfrared domains. Furthermore, the evaporation timescales of dusty and gaseous clumps in the vicinity of SgrA* are much shorter ( 2yr) than the epochs covered by the observations (≈15yr). In addition to the strong evidence for the stellar classification of the D-sources, we also find a clear disk-like pattern following the arrangements of S-stars proposed in the literature. Furthermore, we find a global intrinsic inclination for all dusty sources of 60 ± 20◦, implying a common formation process. Conclusions. The pattern of the dusty sources manifested in the distribution of the position angles, inclinations, and longitudes of the ascending node strongly suggests two different scenarios: the main-sequence stars and the dusty stellar S-cluster sources share a common formation history or migrated with a similar formation channel in the vicinity of SgrA*. Alternatively, the gravitational influence of SgrA* in combination with a massive perturber, such as a putative intermediate mass black hole in the IRS 13 cluster, forces the dusty objects and S-stars to follow a particular orbital arrangement. Key words. stars: black holes– stars: formation– Galaxy: center– galaxies: star formation
JAMES WEBB STUDY THE MASSIVE BLACK HOLE SEEDS
The pathway(s) to seeding the massive black holes (MBHs) that exist at the heart of galaxies in the present and distant Universe remains an unsolved problem. Here we categorise, describe and quantitatively discuss the formation pathways of both light and heavy seeds. We emphasise that the most recent computational models suggest that rather than a bimodal-like mass spectrum between light and heavy seeds with light at one end and heavy at the other that instead a continuum exists. Light seeds being more ubiquitous and the heavier seeds becoming less and less abundant due the rarer environmental conditions required for their formation. We therefore examine the different mechanisms that give rise to different seed mass spectrums. We show how and why the mechanisms that produce the heaviest seeds are also among the rarest events in the Universe and are hence extremely unlikely to be the seeds for the vast majority of the MBH population. We quantify, within the limits of the current large uncertainties in the seeding processes, the expected number densities of the seed mass spectrum. We argue that light seeds must be at least 103 to 105 times more numerous than heavy seeds to explain the MBH population as a whole. Based on our current understanding of the seed population this makes heavy seeds (Mseed > 103 M⊙) a significantly more likely pathway given that heavy seeds have an abundance pattern than is close to and likely in excess of 10−4 compared to light seeds. Finally, we examine the current state-of-the-art in numerical calculations and recent observations and plot a path forward for near-future advances in both domains.
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Ozturkcan, S., Berndt, A., & Angelakis, A. (2024). Mending clothing to support sustainable fashion. Presented at the 31st Annual Conference by the Consortium for International Marketing Research (CIMaR), 10-13 Jun 2024, University of Gävle, Sweden.
Evidence of Jet Activity from the Secondary Black Hole in the OJ 287 Binary S...
Wereport the study of a huge optical intraday flare on 2021 November 12 at 2 a.m. UT in the blazar OJ287. In the binary black hole model, it is associated with an impact of the secondary black hole on the accretion disk of the primary. Our multifrequency observing campaign was set up to search for such a signature of the impact based on a prediction made 8 yr earlier. The first I-band results of the flare have already been reported by Kishore et al. (2024). Here we combine these data with our monitoring in the R-band. There is a big change in the R–I spectral index by 1.0 ±0.1 between the normal background and the flare, suggesting a new component of radiation. The polarization variation during the rise of the flare suggests the same. The limits on the source size place it most reasonably in the jet of the secondary BH. We then ask why we have not seen this phenomenon before. We show that OJ287 was never before observed with sufficient sensitivity on the night when the flare should have happened according to the binary model. We also study the probability that this flare is just an oversized example of intraday variability using the Krakow data set of intense monitoring between 2015 and 2023. We find that the occurrence of a flare of this size and rapidity is unlikely. In machine-readable Tables 1 and 2, we give the full orbit-linked historical light curve of OJ287 as well as the dense monitoring sample of Krakow.
11.1 Role of physical biological in deterioration of grains.pdf
Storagedeteriorationisanyformoflossinquantityandqualityofbio-materials.
Themajorcausesofdeteriorationinstorage
•Physical
•Biological
•Mechanical
•Chemical
Storageonlypreservesquality.Itneverimprovesquality.
Itisadvisabletostartstoragewithqualityfoodproduct.Productwithinitialpoorqualityquicklydepreciates
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
MICROBIAL INTERACTION PPT/ MICROBIAL INTERACTION AND THEIR TYPES // PLANT MIC...
MICROBIAL INTERACTION PPT/ MICROBIAL INTERACTION AND THEIR TYPES // PLANT MIC...ABHISHEK SONI NIMT INSTITUTE OF MEDICAL AND PARAMEDCIAL SCIENCES , GOVT PG COLLEGE NOIDA
Microbial interaction
Microorganisms interacts with each other and can be physically associated with another organisms in a variety of ways.
One organism can be located on the surface of another organism as an ectobiont or located within another organism as endobiont.
Microbial interaction may be positive such as mutualism, proto-cooperation, commensalism or may be negative such as parasitism, predation or competition
Types of microbial interaction
Positive interaction: mutualism, proto-cooperation, commensalism
Negative interaction: Ammensalism (antagonism), parasitism, predation, competition
I. Mutualism:
It is defined as the relationship in which each organism in interaction gets benefits from association. It is an obligatory relationship in which mutualist and host are metabolically dependent on each other.
Mutualistic relationship is very specific where one member of association cannot be replaced by another species.
Mutualism require close physical contact between interacting organisms.
Relationship of mutualism allows organisms to exist in habitat that could not occupied by either species alone.
Mutualistic relationship between organisms allows them to act as a single organism.
Examples of mutualism:
i. Lichens:
Lichens are excellent example of mutualism.
They are the association of specific fungi and certain genus of algae. In lichen, fungal partner is called mycobiont and algal partner is called
II. Syntrophism:
It is an association in which the growth of one organism either depends on or improved by the substrate provided by another organism.
In syntrophism both organism in association gets benefits.
Compound A
Utilized by population 1
Compound B
Utilized by population 2
Compound C
utilized by both Population 1+2
Products
In this theoretical example of syntrophism, population 1 is able to utilize and metabolize compound A, forming compound B but cannot metabolize beyond compound B without co-operation of population 2. Population 2is unable to utilize compound A but it can metabolize compound B forming compound C. Then both population 1 and 2 are able to carry out metabolic reaction which leads to formation of end product that neither population could produce alone.
Examples of syntrophism:
i. Methanogenic ecosystem in sludge digester
Methane produced by methanogenic bacteria depends upon interspecies hydrogen transfer by other fermentative bacteria.
Anaerobic fermentative bacteria generate CO2 and H2 utilizing carbohydrates which is then utilized by methanogenic bacteria (Methanobacter) to produce methane.
ii. Lactobacillus arobinosus and Enterococcus faecalis:
In the minimal media, Lactobacillus arobinosus and Enterococcus faecalis are able to grow together but not alone.
The synergistic relationship between E. faecalis and L. arobinosus occurs in which E. faecalis require folic acid
Recently uploaded (20)
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Microbiology of Central Nervous System INFECTIONS.pdf
Microbiology of Central Nervous System INFECTIONS.pdf
Gadgets for management of stored product pests_Dr.UPR.pdf
Gadgets for management of stored product pests_Dr.UPR.pdf
Sexuality - Issues, Attitude and Behaviour - Applied Social Psychology - Psyc...
Sexuality - Issues, Attitude and Behaviour - Applied Social Psychology - Psyc...
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Alternate Wetting and Drying - Climate Smart Agriculture
Alternate Wetting and Drying - Climate Smart Agriculture
GBSN - Biochemistry (Unit 6) Chemistry of Proteins
GBSN - Biochemistry (Unit 6) Chemistry of Proteins
Candidate young stellar objects in the S-cluster: Kinematic analysis of a sub...
Candidate young stellar objects in the S-cluster: Kinematic analysis of a sub...
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Mending Clothing to Support Sustainable Fashion_CIMaR 2024.pdf
Evidence of Jet Activity from the Secondary Black Hole in the OJ 287 Binary S...
Evidence of Jet Activity from the Secondary Black Hole in the OJ 287 Binary S...
Tissue fluids_etiology_volume regulation_pressure.pptx
Tissue fluids_etiology_volume regulation_pressure.pptx
11.1 Role of physical biological in deterioration of grains.pdf
11.1 Role of physical biological in deterioration of grains.pdf
MICROBIAL INTERACTION PPT/ MICROBIAL INTERACTION AND THEIR TYPES // PLANT MIC...
MICROBIAL INTERACTION PPT/ MICROBIAL INTERACTION AND THEIR TYPES // PLANT MIC...
Gas Chromatography laboratory equipments
- 1. Personalized PDF Catalog Catalog Generated On : 11/12/2023 Gas Chromatography
- 2. https://www.labtron.info/ | info@labtron.info Description : Gas Chromatography is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar analytes. GC oven is capable of 9 temperature program ramps and hold steps, and features rapid cooling: 250 °C to 50 °C < 10 minutes. Accurate flow rate control via AFC has higher level repeatability of retention time and peak area, enabling specific level of analysis by means of dual FID detectors.
- 8. 420 ℃ switch control Baseline signal display Ignition coil control Detection limit: ≤3 ×10 to 12 g/s (Sample:
- 9. n-hexadeca ne) Baseline noise: ≤ 5 × 10 - 14 A Baseline draft: ≤ 6 × 10 -13 A Dynamic range: 10 7 RSD: ≤ 3 %
- 10. Pow er supp ly AC 220 V ± 22 V, 50 Hz ± 0.5 Hz, 3000 W Pack ing dim ensi on 1020 × 660 × 740 mm Gros s 82 kg
- 12. Features : 7-inch LCD display specifies temperature, gas flow and heating curve H2 and N2 mobile gas phase with AFC and constant pressure gas flow type
- 13. Equipped with capillary analysis system and capillary split sampler Injection system incorporates diaphragm cleaning, split flow and auxiliary gas adjustment Standard unit for high-speed analysis with polar capillary column
- 14. PEG-20M and FFAP stationary phase polar capillary columns can be coupled Dual FID detector with automatic flame ignition and baseline signal display Self-diagnostic and automatic fault recognition function
- 15. Multi-core and 32-bit embedded hardware system ensures the reliable operation Equipped with chromatography workstation software to process data Memory function can store 20 sample test data
- 16. RS232 interface and LAN port Applications : Suitable for analysis of trace toxic compounds, monitoring and research in environmental protection, atmosphere and water source pollution. It is widely used for petrol-chemistry, environmental protection, epidemic prevention, pharmacology and scientific research.
- 17. www.labtron.info
- 18. Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom Email: info@labtron.info | Website: https://www.labtron.info/ | Phone: +44 2080 043 608