Bench Top Muffle Furnace (1750 °C) by ACMAS Technologies Pvt Ltd.

325 views

Published on

Bench-Top 1750°C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity.For More Information Please Logon http://goo.gl/pYXUOD

Published in: Technology, Business
0 Comments
2 Likes
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
325
On SlideShare
0
From Embeds
0
Number of Embeds
1
Actions
Shares
0
Downloads
14
Comments
0
Likes
2
Embeds 0
No embeds

No notes for slide

Bench Top Muffle Furnace (1750 °C) by ACMAS Technologies Pvt Ltd.

  1. 1. R O BENCHTOP 1750 C MUFFLE FURNACE MODEL NO. - ACM- MF-72220
  2. 2. Bench-Top 1750°C Muffle Furnace offer heating area and include a ceramic shelf to double furnace load capacity. Highly thermal-efficient ceramic insulation surrounding the chamber achieves maximum energy efficiency. A built-in venting system removes contaminants and moisture. Door safety switch provides operator protection by cutting power to heating elements when door is opened. It features a digital programmable control and is available with a single stored program of eight segments. All furnaces utilize a mechanical Over Temperature Protection relay. CE certified compact muffle furnace with , 8"x8"x8", high purity fibrous alumina chamber, gas inlet and venting ports are installed for using at oxygen or inert gas rich atmosphere and a 30- segment, programmable temperature controller. It is the ideal muffle furnace for material research labs and dental labs to prepare small size sample using temperatures up to 1750oC. Also, the compact furnace can be placed into a glove box and sinter the sample in vacuum and a controlled atmosphere. The furnace consists of high quality alumina fibre brick and Kathnal Super-1800 MoSi2 heating elements with double layer case. . This Compact Muffle furnace is ideal for many laboratory applications. Units feature are. The heating elements are encased in quartz glass tubes making them reliable partners for a variety of applications. These furnaces use open coil heating elements on both sides of the heating chamber to allow fast heating with minimal temperature gradient. This O BENCH TOP 1750 C MUFFLE FURNACE R TECHNOCRACY PVT. LTD.
  3. 3. TECHNOCRACY PVT. LTD. R SALIENT FEATURES SAFETY FEATURES Ÿ Double-walled Ÿ Rust-free Ÿ Textured stainless steel exteriors which ensure low external temperatures and high stability Ÿ Door safety switch protects operator by removing power to the heating elements upon opening the door Ÿ Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition. energy efficiency is enhanced through the use of high thermal-efficient ceramic insulation surrounding the chamber. The free-floating, ceramic fibre door includes a chamber plug that prevents heat loss around the door by totally sealing when the spring-loaded door is closed. The digital single set point control features a single ramp to set point and a dwell, again with a single display but also with a mechanical Over Temperature Protection relay. The digital programmable control features 1 stored program with 8 segments, along with RS232 communications. This microprocessor control features adjustable over-temperature protection, sensor-break protection, and digital readout of both set point and muffle furnace temperature. A built-in venting system allows easy removal of undesirable contamination and moisture, making this muffle furnace especially suitable for use with sensitive microelectronic components. A port allows you to purge the chamber with nitrogen or other special atmospheres, thereby enhancing moisture and contamination control; this port can also be used for independent temperature monitoring. The interior chamber features built-in racks that allow adjustable positioning of a ceramic shelf (included), which effectively doubles the working area. It comes with complete with on/off switch, thermocouple and grounded three-wire cord and plug.
  4. 4. R TECHNOCRACY PVT. LTD. Inside Chamber material & Size High purity fibrous Alumina costing under vacuum Coating by high purity ZrO2 (1800 grade ) 200 x 200x 200 mm (8 x 8 x 8 inch), 8.4 Liters 1750°C ( continuous ) PID automatic control via SCR ( Silicon Controlled Rectifier) power control, e.g. current limiting phase angle fired the resistor with 31 steps programmable 5°C / min +/- 1°C Kanthal Super-1800 Grade MoSi2 - 360mm L , 6pcs AC 220-240 V single Phase 50/60 Hz 6 KW (require > 40 Amp air breaker) 10 feet length 10-3 AWG heavy duty UL approven power cable is included. Extra length cable can be ordered by click picture below Plug is not included. You can order from your local haedware store according to female plug in your lab, or order from link below (30A plug) TECHNICAL SPECIFICATIONS Standard Working Temperature Temperature Control Heating Rate Heating Element Working Voltage Max. Power Power cable & plug Temperature Accuracy
  5. 5. TECHNOCRACY PVT. LTD. R TECHNICAL SPECIFICATIONS up to 45 A 550 x 540 x 620mm 135 Kg (286 lbs) One year limited warranty (Consumable parts such as thermocouple, o-rings and heating elements are not covered by the warranty, please order the replacements at related products below.) CE certified 34" x 32" x 53” 360 Lbs Max. Current Outside Size Net Weight Warranty Shipping Weight Certificate Shipping Dimension
  6. 6. SALES OFFICE (HONG KONG) SHOWROOM SALES OFFICE (RUSSIA) Unit D 28 11/F Wing Tat Comm,Bidg 97, Bonham Strand East, Sheung Wan, Hong Kong (PRC) Tel.: 0086-13929598046 0086- 18922303099 E-mail.: hk@acmasindia.com J-284 Sector 1 Bawana Industrial Estate, Bawana, Delhi, INDIA-110039 Tel.: 0091-0-9312219738 (M) +91- 9717741167 E-mail.: info@acmasindia.com Inmed Trade Street Ozerkovsky Embankment, Unit No 50, Straine- 1, Off- 502, Moscow, Russia E-mail.: info@acmasindia.com Tel.: 0049- 79592345 | Email: russia@acmasindia.com TECHNOCRACY PVT. LTD. www.acmasindia.com | www.cleanroom-equipments.com | www.lab-furnaces.com An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485 WHO: GMP Products | GLP Compliant Products SALES OFFICE (INDIA) th Office no. 506 & 507, 5 Floor, Plot no.- C-9, Pearls Best Height-II, Netaji Subhash Place, Pitam Pura, Delhi- 110034 Land Line No.: +91 - 11- 47619688, Fax: +91-11-47619788 E-mail.: info@acmasindia.com

×