Cytotoxic Safety Cabinet laboratory equipment
•
0 likes•4 views
Cytotoxic Safety Cabinet comes with Safety Height 200 mm (8 inches) of test opening, 440 mm (17 inches) of maximum opening, 465 m3/h (273 cfm) of exhaust volume and 0.73m3 of internal work area. Maintaining cleanliness within the work zone for patient safety and product cleanliness. Provide highest level of operator safety to protect the user’s personnel from hazardous compounds used in cytotoxic drugs. Incorporated with an advanced range of additional safety features. Spacious knee room is provided for the operator in a sitting position, ensuring comfort during use.
Report
Share
Report
Share
Download to read offline
Recommended
Horizontal Clean Bench LBN-HC132
Specifications:
Wind Speed: 0.3 to 0.6 m/s
Vibration Half Peak: ≤3μm（X, Y, Z direction）
High-Efficiency Filter: Efficiency 99.99%
Illumination: ≥ 300 LX
Noise: ≤ 62dB
Ambient temperature: 10 to 30℃
Explore More!
PCR Cabinet laboratory equipment labtron
PCR Cabinet features a slide glass window maximizing light and visibility for the workstation. Equipped with a washable pre filter and 0.3 µm HEPA filter with
a speed adjustable airflow velocity ranging from 0.3 m/s to 0.5 m/s. Manual front and side anti-UV window enclosure with an opening of 320 mm ensures user
protection. Built-in preset 90 mins UV timer automatically switches off post 90 mins in preparation for next experiment. UV lamp can be switched "ON" only
on closure of front window ensuring user safety.
Ductless Fume Hood
PP Spray Fume Hood is a custom-made fume hood to diminish the residues of perchloric acid with an exhaust volume of 920m3 /h. The inside of the
deflector is fitted with a spray system that can neutralise the acid gas and then discharge it in the exhaust gas. The advance model features a
circulating pump, waterproof socket, water-gas remote control, PP sink and an LED display for convenient user operation.
Ductless Fume Hood
Ductless Fume Hood is configured with constant airflow technology to offer protection against airborne biological agents for ease of operation.
It features an exhaust volume of 630 m³/h working within airflow velocity of 0.3 to 0.8 m/s with low power consumption. Employed with transparent
side UV-resistant safety glass for perfect examination of the inside sample without any disturbance.
Ducted Fume Hood
Ducted Fume Hood combines cutting-edge carbon filtering technology with a sensor that detects filter saturation, offering a secure, high-performance solution.
It features an airflow velocity of 0.4 to 0.6 m/s, to offer excellent operator protection from dangerous particles. Enhanced with a microprocessor controller
that controls humidity and temperature to improve working conditions.
Walk-In Fume Hood
Walk-In Fume Hood is designed to protect sensitive biological applications against environmental pollution and cross-contamination by powder aerosol. Enhanced with
an external exhaust blower for fast and quick operation with low power consumption. It stimulates a 1150 m³/h exhaust volume that works within the airflow velocity
range between 0.3 to 0.8 m/s. A user-friendly control panel with an LCD screen allows intuitive operation for clear observation.
Ductless Fume Hood
Ductless Fume Hood is configured with constant airflow technology to offer protection against airborne biological agents for ease of operation. It features an
exhaust volume of 630 m³/h working within airflow velocity of 0.3 to 0.8 m/s with low power consumption. Employed with transparent side UV-resistant safety glass
for perfect examination of the inside sample without any disturbance. Scratch-free high-quality stainless steel ensures corrosion resistance and long service life.
Anaerobic Incubator
Anaerobic Incubator is meticulously engineered to create and maintain an environment devoid of oxygen, crucial for the cultivation and study of anaerobic
microorganisms. The temperature range inside the chamber can be maintained from RT+3 to 60℃ with a microcomputer control system. This unit is tailored to
ensure a consistently anaerobic environment, prioritizing both the integrity of experiments and operator safety.
Recommended
Horizontal Clean Bench LBN-HC132
Specifications:
Wind Speed: 0.3 to 0.6 m/s
Vibration Half Peak: ≤3μm（X, Y, Z direction）
High-Efficiency Filter: Efficiency 99.99%
Illumination: ≥ 300 LX
Noise: ≤ 62dB
Ambient temperature: 10 to 30℃
Explore More!
PCR Cabinet laboratory equipment labtron
PCR Cabinet features a slide glass window maximizing light and visibility for the workstation. Equipped with a washable pre filter and 0.3 µm HEPA filter with
a speed adjustable airflow velocity ranging from 0.3 m/s to 0.5 m/s. Manual front and side anti-UV window enclosure with an opening of 320 mm ensures user
protection. Built-in preset 90 mins UV timer automatically switches off post 90 mins in preparation for next experiment. UV lamp can be switched "ON" only
on closure of front window ensuring user safety.
Ductless Fume Hood
PP Spray Fume Hood is a custom-made fume hood to diminish the residues of perchloric acid with an exhaust volume of 920m3 /h. The inside of the
deflector is fitted with a spray system that can neutralise the acid gas and then discharge it in the exhaust gas. The advance model features a
circulating pump, waterproof socket, water-gas remote control, PP sink and an LED display for convenient user operation.
Ductless Fume Hood
Ductless Fume Hood is configured with constant airflow technology to offer protection against airborne biological agents for ease of operation.
It features an exhaust volume of 630 m³/h working within airflow velocity of 0.3 to 0.8 m/s with low power consumption. Employed with transparent
side UV-resistant safety glass for perfect examination of the inside sample without any disturbance.
Ducted Fume Hood
Ducted Fume Hood combines cutting-edge carbon filtering technology with a sensor that detects filter saturation, offering a secure, high-performance solution.
It features an airflow velocity of 0.4 to 0.6 m/s, to offer excellent operator protection from dangerous particles. Enhanced with a microprocessor controller
that controls humidity and temperature to improve working conditions.
Walk-In Fume Hood
Walk-In Fume Hood is designed to protect sensitive biological applications against environmental pollution and cross-contamination by powder aerosol. Enhanced with
an external exhaust blower for fast and quick operation with low power consumption. It stimulates a 1150 m³/h exhaust volume that works within the airflow velocity
range between 0.3 to 0.8 m/s. A user-friendly control panel with an LCD screen allows intuitive operation for clear observation.
Ductless Fume Hood
Ductless Fume Hood is configured with constant airflow technology to offer protection against airborne biological agents for ease of operation. It features an
exhaust volume of 630 m³/h working within airflow velocity of 0.3 to 0.8 m/s with low power consumption. Employed with transparent side UV-resistant safety glass
for perfect examination of the inside sample without any disturbance. Scratch-free high-quality stainless steel ensures corrosion resistance and long service life.
Anaerobic Incubator
Anaerobic Incubator is meticulously engineered to create and maintain an environment devoid of oxygen, crucial for the cultivation and study of anaerobic
microorganisms. The temperature range inside the chamber can be maintained from RT+3 to 60℃ with a microcomputer control system. This unit is tailored to
ensure a consistently anaerobic environment, prioritizing both the integrity of experiments and operator safety.
Ductless Fume Hood.pdf
Ductless Fume Hood is a floor standing unit offers 910 × 690 × 740 mm chamber dimension, 650 mm maximum opening and 2 pcs chemical filter.
Bat Booth overview
Personnel de-dusting system, developed by Mideco under NIOSH design as an additional tool to prevent occupational dust related diseases like silicosis and "black lung".
GT SONIC-Product Brochures
Guangdong GT Ultrasonic Co.,Ltd produces a variety of ultrasonic cleaners for industrial, laboratory, and household use. Their product lines include ultrasonic cleaning machines of various sizes from 0.7L to over 200L in volume, with different control systems and features depending on the intended application and customer needs. GT Ultrasonic aims to provide high quality, reliable ultrasonic cleaning equipment along with professional service and support to customers.
Class-II-Biosafety-Cabinet.pdf
Class II Biosafety cabinet, type A2 LB-20BSC is a floor mounted containment with 70% air circulation and 30% air exhaustion. The use of non-volatiles.
Rotating Wing Dust Filter
Isımsan manufactures rotating wing dust filter systems for a variety of industries such as food, animal feed, chemical, and construction materials. The filter system has a cylindrical shape with a downward conical dust collector. It uses a compressed air rotary wing system to efficiently and quietly clean the filter membranes with compressed air jets. The filter system meets high standards for quality, hygiene, and efficiency.
Rotating Dustfilter System
Following the successful market launch in many industrial sectors with a convincing price/performance ratio, the rotating dustfilter systems are prepared for the serial production now. The highly efficient dust collector is suitable for almost all branches of industry, and is upgrading already existing industrial processes too.
For a technical and commercial overview please take a look at the brochure. For more information we are there for you.
www.isimsan.com
Isoclean Healthcare Platform Isolator (HPI G3)
The Isoclean® Healthcare Platform Isolator (HPI-G3) facilitates the isolation of a product or process while providing the required sterile/aseptic environment. It is configured to operate at positive or negative pressure in single or recirculating airflow. This equipment provides a comprehensive range of personnel and product protection in addition to the surrounding work areas and the environment.
• Pharmacy Compounding (Chemotherapy/TPN)
• Small-scale Potent Material Handling
• Aseptic Processing
• Research and Development
• Cell processing
Clean room equipments
Manufacturing Variety of Air Filters & Air Condioning Related Components.
WELCOME TO ENVIRO TECH INDUSTRIAL PRODUCTS.
Sales Office:-Plot No. X/852, Chand Mohalla, Street No: 11 Gandhi Nagar Industrial Area, Near Ramgareya Gurdwara, Delhi – 110031.
E-mail :envirotech76@yahoo.co.in,
envirotech1976@yahoo.co.in,
envirotech.1976@yahoo.in
Mr : R.P.SHARMA.
9871034100,9868958924,9650264867,9716640145
WhatsApp No. 9871034100,9868958924
Websites :
www.envirotechindustrialproducts.co.in
www.envirotechindustrialproduct.co.in
www.envirotechindustrialproduct.in
www.envirotechindustrialproducts.in
www.envirotechindustrialproduct.com
www.envirotechindustrialproducts.com
www.envirotechindustrialproducts.net
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
Air-Sampler
The Air Sampler is a robust and reliable device specifically engineered to ensure accurate and contamination-free air sampling. It offers a range of essential features that make it indispensable in various fields, including healthcare, pharmaceuticals, environmental monitoring, and industrial hygiene.
Key Features and Functions:
Contamination Prevention: The Air Sampler is equipped with an autoclavable sampling head, an essential feature to prevent microbial contamination during the sampling process. This is particularly critical in applications where maintaining a sterile environment is paramount, such as in pharmaceutical cleanrooms and hospitals.
Versatile Sampling: This device excels in particle sampling, catering to a diverse range of applications. Its sampling volume can be adjusted, covering a remarkable span from 0.01 to 9.0 cubic meters (m³). This versatility allows users to adapt the instrument to the specific requirements of their air quality assessment needs.
High Flow Rate and Multiple Holes: The Air Sampler incorporates multiple holes within the sample hole, each with a precisely controlled flow rate of 0.38 meters per second (m/s). This design ensures that a consistent and representative sample of the air is collected, enhancing the reliability and accuracy of the results.
Programmable Sampling: A notable feature is its programmable capabilities. Users have the ability to set automatic sampling times, which is incredibly valuable for unattended or extended monitoring sessions. This programmability reduces the need for constant oversight and allows for efficient data collection.
Real-time Monitoring: The Air Sampler boasts a digital display that provides real-time monitoring of critical parameters. Users can readily access and review important data during the sampling process. This real-time feedback ensures that the instrument is functioning as intended, offering peace of mind and data confidence.
Applications:
The Air Sampler finds utility in a wide range of applications, including but not limited to:
Pharmaceutical Industry: Used for air quality monitoring in sterile production environments, ensuring compliance with regulatory standards.
Healthcare Facilities: Critical in hospitals and clinics for monitoring air quality, particularly in areas with immunocompromised patients.
Environmental Monitoring: Employed to assess airborne particulate matter, aiding in pollution control and air quality assessment.
Industrial Hygiene: Valuable in occupational health and safety efforts, helping identify and mitigate potential hazards posed by airborne contaminants.
Research and Development: Utilized for various research purposes, such as studying air quality in laboratory settings and conducting experiments that require precise air sampling.
In conclusion, the Air Sampler, is a versatile and reliable instrument with a range of features tailored to meet the demands of diverse industries and applications.
Hydac filter element อะไหล่ไส้กรอง - นิวเมติก.com
จำหน่าย Hydac Filter element (อะไหล่ไส้กรองไฮดรอลิค)
บริษัท นิวเมติก ดอทคอม (ประเทศไทย) จำกัด
www.นิวเมติก.com/Filter-element/
Ducted Fume hood.pdf
Ducted Fume hood is a microprocessor controlled ducted fume hood with built in centrifugal blower which removes toxic gases to the outside of the working environment.
Austin Pure Air Presentation
The document discusses Genano air purification technology from Austin Pure Air. Genano units use patented ionization technology to remove over 99.5% of particles down to 0.001 microns from the air, including viruses, bacteria, and mold. This is more effective than traditional filters. Genano units are self-cleaning and require little maintenance. They are suitable for both room-sized and whole building air purification applications.
Vacuum Oven - Laboratory or Process Scale
Vacuum ovens are utilized for heat treatment of items that may degrade quickly when heated in the presence of oxygen.
EN 300 400-500 incubator
The document describes several incubator models from EN300 to EN500P. The incubators provide precise temperature control from ambient +5°C to 80°C using a PID microprocessor system. They are suitable for biology and microbiology labs. Key features include a user-friendly interface, various temperature alarms and safety controls, and stainless steel or aluminum interiors. Technical specifications provide internal dimensions, temperature ranges and controls for each model.
LAXMI INSTRUMENTS ppt (1).pptx
Laxmi Instruments was established in 2003 and manufactures chromatography instruments, lab furniture, fume hoods, biosafety cabinets, glove boxes, and other lab equipment. It also provides turnkey lab setup services, including architectural, civil, electrical, and instrumentation work. The company's products include lab furniture, cleanrooms, high pressure gas handling systems, gas purification panels, BOD incubators, heating mantles, muffle furnaces, and more. Laxmi Instruments aims to provide high quality products and services to its customers.
GRT Product Brochure
1) The document provides information about Zhengzhou Great Machinery Equipment Co., Ltd., including their products such as dryer equipment, related equipment, and contact details. 2) Their main products include microwave vacuum dryers, hot air circulation drying ovens, batch dryers, and digital constant temperature drying machines. 3) They aim to increase customers' productivity while ensuring safety through high quality equipment, resources, technology, and processes.
GRT Product Brochure
1) The document provides information about Zhengzhou Great Machinery Equipment Co., Ltd., including their products such as dryer equipment, related equipment, and contact details. 2) Their main products include microwave vacuum dryers, hot air circulation drying ovens, batch dryers, and digital constant temperature drying machines. 3) They aim to increase customers' productivity while ensuring safety through high quality equipment, technology, and processes.
Esco Pass Boxes and Transfer Hatches
Controlling the ingress of particulate contamination into cleanrooms and other controlled environments is paramount in order to maintain the integrity of products and processes. Personnel traffic is the most important factor which must be controlled. Esco Pass Boxes and Transfer Hatches are an effective solution as they allow materials to be transferred into the controlled environment without actual personnel movement. They may also be used to protect the external environment from egress of contamination, for example, in biological safety laboratory applications.
Esco Animal Research Workstation / Animal Transfer Workstation
Animal research, cage changing and bedding disposal procedures are now simpler, safer and more productive with the Esco range of VIVA® Animal Containment Workstations.
With the introduction of the VIVA® range, Esco applies decades of experience in clean air technologies to the animal research laboratory, protecting personnel and the laboratory environment from:
-Hazards related to the equipment, materials and practices used in performing routine animal husbandry;
-Hazards relating directly or indirectly to animal contact;
-Hazards related to the technique or materials or biohazardous substances that may be used during the course of animal research.
colorimeter laboratory equipment product
The color card reading colorimeter reads the colored samples. It is equipped with 2.4 inch screen to display the matching color card number on screen. It comes
with built in color chart where after each measurement, instrument makes a match with three color numbers from the color charts for the colorist’s reference.
Automatic Colony Counter laboratory equipment
Automatic Colony Counter is equipped with high resolution CCD Camera lens. Incorporated with advanced Smart Counter software for accurate automatic microbial
colony counting. Open platform design, bottom LED light source makes it user friendly counter. Encrypted USB-key guarantees data security, and convenient
data management.
More Related Content
Similar to Cytotoxic Safety Cabinet laboratory equipment
Ductless Fume Hood.pdf
Ductless Fume Hood is a floor standing unit offers 910 × 690 × 740 mm chamber dimension, 650 mm maximum opening and 2 pcs chemical filter.
Bat Booth overview
Personnel de-dusting system, developed by Mideco under NIOSH design as an additional tool to prevent occupational dust related diseases like silicosis and "black lung".
GT SONIC-Product Brochures
Guangdong GT Ultrasonic Co.,Ltd produces a variety of ultrasonic cleaners for industrial, laboratory, and household use. Their product lines include ultrasonic cleaning machines of various sizes from 0.7L to over 200L in volume, with different control systems and features depending on the intended application and customer needs. GT Ultrasonic aims to provide high quality, reliable ultrasonic cleaning equipment along with professional service and support to customers.
Class-II-Biosafety-Cabinet.pdf
Class II Biosafety cabinet, type A2 LB-20BSC is a floor mounted containment with 70% air circulation and 30% air exhaustion. The use of non-volatiles.
Rotating Wing Dust Filter
Isımsan manufactures rotating wing dust filter systems for a variety of industries such as food, animal feed, chemical, and construction materials. The filter system has a cylindrical shape with a downward conical dust collector. It uses a compressed air rotary wing system to efficiently and quietly clean the filter membranes with compressed air jets. The filter system meets high standards for quality, hygiene, and efficiency.
Rotating Dustfilter System
Following the successful market launch in many industrial sectors with a convincing price/performance ratio, the rotating dustfilter systems are prepared for the serial production now. The highly efficient dust collector is suitable for almost all branches of industry, and is upgrading already existing industrial processes too.
For a technical and commercial overview please take a look at the brochure. For more information we are there for you.
www.isimsan.com
Isoclean Healthcare Platform Isolator (HPI G3)
The Isoclean® Healthcare Platform Isolator (HPI-G3) facilitates the isolation of a product or process while providing the required sterile/aseptic environment. It is configured to operate at positive or negative pressure in single or recirculating airflow. This equipment provides a comprehensive range of personnel and product protection in addition to the surrounding work areas and the environment.
• Pharmacy Compounding (Chemotherapy/TPN)
• Small-scale Potent Material Handling
• Aseptic Processing
• Research and Development
• Cell processing
Clean room equipments
Manufacturing Variety of Air Filters & Air Condioning Related Components.
WELCOME TO ENVIRO TECH INDUSTRIAL PRODUCTS.
Sales Office:-Plot No. X/852, Chand Mohalla, Street No: 11 Gandhi Nagar Industrial Area, Near Ramgareya Gurdwara, Delhi – 110031.
E-mail :envirotech76@yahoo.co.in,
envirotech1976@yahoo.co.in,
envirotech.1976@yahoo.in
Mr : R.P.SHARMA.
9871034100,9868958924,9650264867,9716640145
WhatsApp No. 9871034100,9868958924
Websites :
www.envirotechindustrialproducts.co.in
www.envirotechindustrialproduct.co.in
www.envirotechindustrialproduct.in
www.envirotechindustrialproducts.in
www.envirotechindustrialproduct.com
www.envirotechindustrialproducts.com
www.envirotechindustrialproducts.net
www.envirotechindustrialproduct.net
www.envirotechindustrialproductsindia.in
Air-Sampler
The Air Sampler is a robust and reliable device specifically engineered to ensure accurate and contamination-free air sampling. It offers a range of essential features that make it indispensable in various fields, including healthcare, pharmaceuticals, environmental monitoring, and industrial hygiene.
Key Features and Functions:
Contamination Prevention: The Air Sampler is equipped with an autoclavable sampling head, an essential feature to prevent microbial contamination during the sampling process. This is particularly critical in applications where maintaining a sterile environment is paramount, such as in pharmaceutical cleanrooms and hospitals.
Versatile Sampling: This device excels in particle sampling, catering to a diverse range of applications. Its sampling volume can be adjusted, covering a remarkable span from 0.01 to 9.0 cubic meters (m³). This versatility allows users to adapt the instrument to the specific requirements of their air quality assessment needs.
High Flow Rate and Multiple Holes: The Air Sampler incorporates multiple holes within the sample hole, each with a precisely controlled flow rate of 0.38 meters per second (m/s). This design ensures that a consistent and representative sample of the air is collected, enhancing the reliability and accuracy of the results.
Programmable Sampling: A notable feature is its programmable capabilities. Users have the ability to set automatic sampling times, which is incredibly valuable for unattended or extended monitoring sessions. This programmability reduces the need for constant oversight and allows for efficient data collection.
Real-time Monitoring: The Air Sampler boasts a digital display that provides real-time monitoring of critical parameters. Users can readily access and review important data during the sampling process. This real-time feedback ensures that the instrument is functioning as intended, offering peace of mind and data confidence.
Applications:
The Air Sampler finds utility in a wide range of applications, including but not limited to:
Pharmaceutical Industry: Used for air quality monitoring in sterile production environments, ensuring compliance with regulatory standards.
Healthcare Facilities: Critical in hospitals and clinics for monitoring air quality, particularly in areas with immunocompromised patients.
Environmental Monitoring: Employed to assess airborne particulate matter, aiding in pollution control and air quality assessment.
Industrial Hygiene: Valuable in occupational health and safety efforts, helping identify and mitigate potential hazards posed by airborne contaminants.
Research and Development: Utilized for various research purposes, such as studying air quality in laboratory settings and conducting experiments that require precise air sampling.
In conclusion, the Air Sampler, is a versatile and reliable instrument with a range of features tailored to meet the demands of diverse industries and applications.
Hydac filter element อะไหล่ไส้กรอง - นิวเมติก.com
จำหน่าย Hydac Filter element (อะไหล่ไส้กรองไฮดรอลิค)
บริษัท นิวเมติก ดอทคอม (ประเทศไทย) จำกัด
www.นิวเมติก.com/Filter-element/
Ducted Fume hood.pdf
Ducted Fume hood is a microprocessor controlled ducted fume hood with built in centrifugal blower which removes toxic gases to the outside of the working environment.
Austin Pure Air Presentation
The document discusses Genano air purification technology from Austin Pure Air. Genano units use patented ionization technology to remove over 99.5% of particles down to 0.001 microns from the air, including viruses, bacteria, and mold. This is more effective than traditional filters. Genano units are self-cleaning and require little maintenance. They are suitable for both room-sized and whole building air purification applications.
Vacuum Oven - Laboratory or Process Scale
Vacuum ovens are utilized for heat treatment of items that may degrade quickly when heated in the presence of oxygen.
EN 300 400-500 incubator
The document describes several incubator models from EN300 to EN500P. The incubators provide precise temperature control from ambient +5°C to 80°C using a PID microprocessor system. They are suitable for biology and microbiology labs. Key features include a user-friendly interface, various temperature alarms and safety controls, and stainless steel or aluminum interiors. Technical specifications provide internal dimensions, temperature ranges and controls for each model.
LAXMI INSTRUMENTS ppt (1).pptx
Laxmi Instruments was established in 2003 and manufactures chromatography instruments, lab furniture, fume hoods, biosafety cabinets, glove boxes, and other lab equipment. It also provides turnkey lab setup services, including architectural, civil, electrical, and instrumentation work. The company's products include lab furniture, cleanrooms, high pressure gas handling systems, gas purification panels, BOD incubators, heating mantles, muffle furnaces, and more. Laxmi Instruments aims to provide high quality products and services to its customers.
GRT Product Brochure
1) The document provides information about Zhengzhou Great Machinery Equipment Co., Ltd., including their products such as dryer equipment, related equipment, and contact details. 2) Their main products include microwave vacuum dryers, hot air circulation drying ovens, batch dryers, and digital constant temperature drying machines. 3) They aim to increase customers' productivity while ensuring safety through high quality equipment, resources, technology, and processes.
GRT Product Brochure
1) The document provides information about Zhengzhou Great Machinery Equipment Co., Ltd., including their products such as dryer equipment, related equipment, and contact details. 2) Their main products include microwave vacuum dryers, hot air circulation drying ovens, batch dryers, and digital constant temperature drying machines. 3) They aim to increase customers' productivity while ensuring safety through high quality equipment, technology, and processes.
Esco Pass Boxes and Transfer Hatches
Controlling the ingress of particulate contamination into cleanrooms and other controlled environments is paramount in order to maintain the integrity of products and processes. Personnel traffic is the most important factor which must be controlled. Esco Pass Boxes and Transfer Hatches are an effective solution as they allow materials to be transferred into the controlled environment without actual personnel movement. They may also be used to protect the external environment from egress of contamination, for example, in biological safety laboratory applications.
Esco Animal Research Workstation / Animal Transfer Workstation
Animal research, cage changing and bedding disposal procedures are now simpler, safer and more productive with the Esco range of VIVA® Animal Containment Workstations.
With the introduction of the VIVA® range, Esco applies decades of experience in clean air technologies to the animal research laboratory, protecting personnel and the laboratory environment from:
-Hazards related to the equipment, materials and practices used in performing routine animal husbandry;
-Hazards relating directly or indirectly to animal contact;
-Hazards related to the technique or materials or biohazardous substances that may be used during the course of animal research.
Similar to Cytotoxic Safety Cabinet laboratory equipment (20)
Esco Animal Research Workstation / Animal Transfer Workstation
Esco Animal Research Workstation / Animal Transfer Workstation
More from kimberlabtroninfo
colorimeter laboratory equipment product
The color card reading colorimeter reads the colored samples. It is equipped with 2.4 inch screen to display the matching color card number on screen. It comes
with built in color chart where after each measurement, instrument makes a match with three color numbers from the color charts for the colorist’s reference.
Automatic Colony Counter laboratory equipment
Automatic Colony Counter is equipped with high resolution CCD Camera lens. Incorporated with advanced Smart Counter software for accurate automatic microbial
colony counting. Open platform design, bottom LED light source makes it user friendly counter. Encrypted USB-key guarantees data security, and convenient
data management.
Ion-chromatograph-system laboratory equipment
Ion chromatograph system is a modular design ion chromatograph with an upgraded circuit technology. Bipolar conductivity detector, improves the detection
performance and stability of the instrument. Gradient elution system detects small molecules from complex samples. Built-in circulating stereo constant
temperature and other technologies ensures accurate and reliable experimental data.
Gas Chromatography laboratory equipments
Gas Chromatography is a benchtop unit with advanced flow controller (AFC) technology. System has digital control mode and polar capillary columns to separate polar
analytes. GC oven is capable of 9 temperature program ramps and hold steps, and features rapid cooling: 250 °C to 50 °C < 10 minutes. Accurate flow rate control
via AFC has higher level repeatability of retention time and peak area, enabling specific level of analysis by means of dual FID detectors.
Recirculating Chiller laboratory equipment
Recirculating Chiller is high performance circulating water pump with 0 to 1.5 bar pump capacity pressure. Its temperature ranges from 5˚C to 40˚C and offers
PT100 temperature sensor. Designed with TECUMSEH compressor in order to ensure cooling efficiency and reduce noise with PID temperature controlling technology.
Equipped with Over-temperature protection, auto-alarm function and Color LCD screen display for more running data and dynamic identifier.
Biochemistry Analyzer
Biochemistry analyzer is a fully automated floor standing unit with a direct reading system and random operational access. Features automated washing station for
both sample and reagent probe. Provision for liquid level detection a collision protection for both sample and reagent probe. Built-in cooling system for reagent
chamber.
Benchtop Multi-parameter Water Quality Meter
Benchtop multi-parameter water quality meter is comes with different measurement modes for quality and testing of water on different parameters.
It measures pH, Conductivity, TDS content from the test sample. It stores and recalls up to 500 sets of data. Calibration due reminder informs
operator to calibrate the meter regularly.
Benchtop Ion meter
Benchtop Ion meter for Cl, comes with (Cl) chloride ion selective electrode for chloride ion concentration measurement. This Ion meter comes with ± 0.5 % F.S.
measurement accuracy. The direct ion concentration readout helps in elaborate measurement process. The system menu allows setting the 8 parameters
like calibration points, stability condition etc. It can measure concentration in ppm, mg / L, mol / L. The mV measurement is used to check the
performance of ion selective electrode.
Benchtop Dissolved oxygen meter
Benchtop Dissolved oxygen meter is equipped with polarographic sensor to measure the dissolved oxygen content. The manual salinity & barometric pressure
compensation helps in accurate measurement of dissolved oxygen. The system menu of dissolved oxygen meter can set 6 parameters which includes the number
of calibration points, temperature units etc.
Colorimeter
Colorimeter is a durable photoelectric colorimeter with benchtop design. Equipped with specific light filters of the visible range (420 to 660 nm) to measure
the concertation and determine the color. Its three digit LED display shows Transmittance and Absorbance values.
Constant Temperature Water Bath
Constant Temperature Water Bath is a thermostatic water bath comprising nature water convection heat transfer configuration with stainless steel heating tube,
offers temperature range of RT +5°C to 100°C with fixed temperature operation and timing function. Features stretching inner chamber with 3.4 L of capacity
along with roof cover, and one-button operation. Incorporated PID temperature controller and NTC sensor with digital tube display, ensures precise auxiliary
and constant temperature. With timing wait function, auto stop function and over temperature alarm, it also offers deviation correction, menu key locked,
power failure back-up and power-off memory. Designed with cold – rolled steel plate outer shell, single shelf, single hole and chemical reagent resistance
surface coating, this water bath automatically stops working on water shortage to ensure safe product operation.
8 Hole Thermostatic Bath
8 Hole Thermostatic Bath is a 19.8 L bottom heating bath with a temperature range of 5°C to 99°C. Water sink is surface electrolysis treated with cold rolled
outer shell. Equipped with multi-section programmed control, touch button temperature setting mode and 3 digit temperature display. Easy to use,
controller allows the user to monitor and set temperature and time. Easy to use functions like deviation correction, menu key lock, power failure backup
and restoration of parameters on power off included.
6 Hole Thermostatic Bath
6 Hole Thermostatic Bath is a 19.3 L bottom heating bath with a temperature range of 5 °C ~ 100 °C. Water sink is surface electrolysis treated with cold
rolled outer shell. Equipped with multi-section programmed control, touch button temperature setting mode and 3 digit temperature display. Easy to use controls
allow the user to monitor and set temperature and time. Easy to use functions like deviation
Floor Balance
Floor Balance is high precision weighing scale with 160 kg capacity. The operation temperature range is from 5 to 25˚C and offers 10 g resolution.
Designed with LED display and load cell sensor. The measuring device is widely used by enterprises and scientific research institutions, weighing material
at large scale.
Atomic Fluorescence Spectrometer
Atomic Fluorescence Spectrometer is a microprocessor controlled double-channel, non-dispersive unit used for trace element composition, ultra-trace analysis
of Mercury and all other hydride-forming elements. Pre adjusted referral optical plane to coincide atomizer center with optical focus. Equipped with a feature
of real time conversion of data into graph.
Atomic Absorption Spectrophotometer
Atomic absorption spectrophotometer comes with Deuterium lamp for background correction, RS232 interface, Multi-linear and nonlinear curve fitting.
Its double beam system automatically compensates the light source drift and wavelength drift caused by the variation of temperature and electronic
circuit drift so as to reach a good basic line stability. The specially designed fine light beam passes through the flame to ensure a high precision
analytical test and low characteristic concentration in this atomic absorption spectrophotometer. It has multiple applications in research and
development and industrial analysis.
Ash Content Tester
Ash Content Tester is the device composed of muffle furnace, temperature controller and electric heating plate. It is small size and needs less land
with special fire-resistant material and heating components. The heating time is short and it has a long lifetime. It used to determine the ash in the range
0.001 to 0.180 mass %, from distillate and petroleum products.
Anaerobic Incubator
Anaerobic Incubator is a workstation especially designed to culture anaerobic micro-organisms for various studies. Features micro-computer control system,
UV sterilizer, stainless steel chamber, latex gloves, tough front glass window, de-oxidization catalyst, leakage protection etc. to ensure anaerobic environment
while working along with operator’s safety. Within 5 min anaerobic environment is created in the cultivation chamber while it takes less than 1 hr for the operation
chamber. It is used in microbiology labs, oil industry, soil research etc.
Handheld Airborne Particle Counter
Handheld airborne particle counter is a six channel microcomputer controlled particle counter. It offers a provision of simultaneous particle counting
in six different size ranges. Features like internal audible alarm and user-selectable alarm limits makes this device an ideal choice for clean room applications.
PCR System
PCR System consist of long service life peltier heating unit with back and front air channel for side by side placement of machine. Designed with
stepless adjustable hot lid with pressure-protection to fit tubes of different heights. With nonlinear gradient type, it offers 30 to 105℃ gradient
temperature range with 0.5°C/ s maximum ramping rate.Features high heating and cooling rate, one-click quick incubation function to meet critical needs of
the nucleic acid experiments.
More from kimberlabtroninfo (20)
Recently uploaded
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
Compexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
20240520 Planning a Circuit Simulator in JavaScript.pptx
Evaporation step counter work. I have done a physical experiment.
(Work in progress.)
ESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
Cytokines and their role in immune regulation.pptx
This presentation covers the content and information on "Cytokines " and their role in immune regulation .
Shallowest Oil Discovery of Turkiye.pptx
The Petroleum System of the Çukurova Field - the Shallowest Oil Discovery of Türkiye, Adana
Bob Reedy - Nitrate in Texas Groundwater.pdf
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Context. With a mass exceeding several 104 M⊙ and a rich and dense population of massive stars, supermassive young star clusters
represent the most massive star-forming environment that is dominated by the feedback from massive stars and gravitational interactions
among stars.
Aims. In this paper we present the Extended Westerlund 1 and 2 Open Clusters Survey (EWOCS) project, which aims to investigate
the influence of the starburst environment on the formation of stars and planets, and on the evolution of both low and high mass stars.
The primary targets of this project are Westerlund 1 and 2, the closest supermassive star clusters to the Sun.
Methods. The project is based primarily on recent observations conducted with the Chandra and JWST observatories. Specifically,
the Chandra survey of Westerlund 1 consists of 36 new ACIS-I observations, nearly co-pointed, for a total exposure time of 1 Msec.
Additionally, we included 8 archival Chandra/ACIS-S observations. This paper presents the resulting catalog of X-ray sources within
and around Westerlund 1. Sources were detected by combining various existing methods, and photon extraction and source validation
were carried out using the ACIS-Extract software.
Results. The EWOCS X-ray catalog comprises 5963 validated sources out of the 9420 initially provided to ACIS-Extract, reaching a
photon flux threshold of approximately 2 × 10−8 photons cm−2
s
−1
. The X-ray sources exhibit a highly concentrated spatial distribution,
with 1075 sources located within the central 1 arcmin. We have successfully detected X-ray emissions from 126 out of the 166 known
massive stars of the cluster, and we have collected over 71 000 photons from the magnetar CXO J164710.20-455217.
Phenomics assisted breeding in crop improvement
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Recently uploaded (20)
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
20240520 Planning a Circuit Simulator in JavaScript.pptx
20240520 Planning a Circuit Simulator in JavaScript.pptx
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
aziz sancar nobel prize winner: from mardin to nobel
aziz sancar nobel prize winner: from mardin to nobel
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Basics of crystallography, crystal systems, classes and different forms
Basics of crystallography, crystal systems, classes and different forms
Cytokines and their role in immune regulation.pptx
Cytokines and their role in immune regulation.pptx
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
EWOCS-I: The catalog of X-ray sources in Westerlund 1 from the Extended Weste...
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
Cytotoxic Safety Cabinet laboratory equipment
- 1. Personalized PDF Catalog Catalog Generated On : 12/12/2023 Cytotoxic Safety Cabinet
- 2. https://www.labtron.info/ | info@labtron.info Description : Cytotoxic Safety Cabinet comes with Safety Height 200 mm (8 inches) of test opening, 440 mm (17 inches) of maximum opening, 465 m3/h (273 cfm) of exhaust volume and 0.73m3 of internal work area. Maintaining cleanliness within the work zone for patient safety and product cleanliness. Provide highest level of operator safety to protect the user’s personnel from hazardous compounds used in cytotoxic drugs. Incorporated with an
- 3. advanced range of additional safety features. Spacious knee room is provided for the operator in a sitting position, ensuring comfort during use. Specifications : Exhaust Volume 465 m3/h (273 cfm) Tested Opening Safety Height 200 mm (8 inches) Max Opening 440 mm (17 inches)
- 4. Internal Work Area, Space 0.73 m3 Inflow Velocity 0.53 m/s Down Flow Velocity 0.33 m/s Air Supply Filter ULPA filter, efficiency > 99.999 % for particle size at 0.3 µm
- 5. Exhaust Filter 2 pieces HEPA filters, efficiency > 99.999 % for particle size at 0.3 µm Filter life indicator and filter working time indicator Alarm Abnormal airflow velocity; Filter replacement; Front window at unsafe height
- 6. Noise EN 12469 ≤ 58 dB/NSF 49 ≤ 61 dB Water And Gas Tap Water Tap×1, Gas tap×1 UV Lamp 30 W×1 Emission of 253.7 nanometres for most efficient decontamination UV life indicator
- 7. LED lamp 16 W×2 Illuminatio n ≥ 1000 lux Consumpti on 900 W Waterproof Socket Two; Total load of two sockets: ≤ 500 W Display LCD Display Control System Microprocessor
- 8. Humidity And Temperatur e Humidity and temperature can be displayed on the control panel Material Work Area:304 stainless steel Main Body: Cold- rolled steel with anti- bacteria powder coating Front Window Motorized, two-layer laminated toughened glass ≥ 5 mm, anti UV
- 9. Caster Foot master Caster Power Supply AC 220 V ± 10 %, 50/60 Hz; 110 V ± 10 %, 60Hz Internal Size (W×D×H) 1220×600×630 mm External Size (W×D×H) 1380×760×2100 mm
- 11. Features : Microprocessor controller supervises all functions Equipped with remote control for realization of all functions Easier and more convenient operation
- 12. Large LCD digital display, easy to monitor all the safety parameters Improvement of users interface by ergonomically sized control panel Water and gas taps is made up of high quality stainless steel
- 13. UV lamp emits 253.7 nm for decontamination Built in with bag in and bag out filter with PVC bag PVC bag ensures safety of personnel and environment with Convenient and quick replacement process
- 14. Motorized front window with anti-UV protection Two layer laminated toughened glass of 5 mm Spacious knee room maximizes operator comfort Applications :
- 15. Cytotoxic Safety Cabinet used in pharma industry, chemotherapy for preparing drugs. It is a solution for cytotoxic and antineoplastic drug processing, providing the highest level of patient, pharmacist and environmental protection.
- 16. www.labtron.info Labtron Equipment Ltd. Quatro House, Lyon Way, Camberley, Surrey GU16 7ER United Kingdom
- 17. Email: info@labtron.info | Website: https://www.labtron.info/ | Phone: +44 2080 043 608